1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Driver for the VoIP USB phones with CM109 chipsets. 4 * 5 * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org> 6 */ 7 8 /* 9 * Tested devices: 10 * - Komunikate KIP1000 11 * - Genius G-talk 12 * - Allied-Telesis Corega USBPH01 13 * - ... 14 * 15 * This driver is based on the yealink.c driver 16 * 17 * Thanks to: 18 * - Authors of yealink.c 19 * - Thomas Reitmayr 20 * - Oliver Neukum for good review comments and code 21 * - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap 22 * - Dmitry Torokhov for valuable input and review 23 * 24 * Todo: 25 * - Read/write EEPROM 26 */ 27 28 #include <linux/kernel.h> 29 #include <linux/init.h> 30 #include <linux/slab.h> 31 #include <linux/module.h> 32 #include <linux/moduleparam.h> 33 #include <linux/rwsem.h> 34 #include <linux/usb/input.h> 35 36 #define DRIVER_VERSION "20080805" 37 #define DRIVER_AUTHOR "Alfred E. Heggestad" 38 #define DRIVER_DESC "CM109 phone driver" 39 40 static char *phone = "kip1000"; 41 module_param(phone, charp, S_IRUSR); 42 MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}"); 43 44 enum { 45 /* HID Registers */ 46 HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */ 47 HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */ 48 HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */ 49 HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */ 50 HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */ 51 HID_OR1 = 0x01, /* GPO - General Purpose Output */ 52 HID_OR2 = 0x02, /* Set GPIO to input/output mode */ 53 HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */ 54 55 /* HID_IR0 */ 56 RECORD_MUTE = 1 << 3, 57 PLAYBACK_MUTE = 1 << 2, 58 VOLUME_DOWN = 1 << 1, 59 VOLUME_UP = 1 << 0, 60 61 /* HID_OR0 */ 62 /* bits 7-6 63 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer 64 and SPDIF 65 1: HID_OR0-3 are used as generic HID registers 66 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL, 67 EEPROM_DATA0-1, EEPROM_CTRL (see Note) 68 3: Reserved 69 */ 70 HID_OR_GPO_BUZ_SPDIF = 0 << 6, 71 HID_OR_GENERIC_HID_REG = 1 << 6, 72 HID_OR_MAP_MCU_EEPROM = 2 << 6, 73 74 BUZZER_ON = 1 << 5, 75 76 /* up to 256 normal keys, up to 15 special key combinations */ 77 KEYMAP_SIZE = 256 + 15, 78 }; 79 80 /* CM109 protocol packet */ 81 struct cm109_ctl_packet { 82 u8 byte[4]; 83 } __attribute__ ((packed)); 84 85 enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) }; 86 87 /* CM109 device structure */ 88 struct cm109_dev { 89 struct input_dev *idev; /* input device */ 90 struct usb_device *udev; /* usb device */ 91 struct usb_interface *intf; 92 93 /* irq input channel */ 94 struct cm109_ctl_packet *irq_data; 95 dma_addr_t irq_dma; 96 struct urb *urb_irq; 97 98 /* control output channel */ 99 struct cm109_ctl_packet *ctl_data; 100 dma_addr_t ctl_dma; 101 struct usb_ctrlrequest *ctl_req; 102 struct urb *urb_ctl; 103 /* 104 * The 3 bitfields below are protected by ctl_submit_lock. 105 * They have to be separate since they are accessed from IRQ 106 * context. 107 */ 108 unsigned irq_urb_pending:1; /* irq_urb is in flight */ 109 unsigned ctl_urb_pending:1; /* ctl_urb is in flight */ 110 unsigned buzzer_pending:1; /* need to issue buzz command */ 111 spinlock_t ctl_submit_lock; 112 113 unsigned char buzzer_state; /* on/off */ 114 115 /* flags */ 116 unsigned open:1; 117 unsigned resetting:1; 118 unsigned shutdown:1; 119 120 /* This mutex protects writes to the above flags */ 121 struct mutex pm_mutex; 122 123 unsigned short keymap[KEYMAP_SIZE]; 124 125 char phys[64]; /* physical device path */ 126 int key_code; /* last reported key */ 127 int keybit; /* 0=new scan 1,2,4,8=scan columns */ 128 u8 gpi; /* Cached value of GPI (high nibble) */ 129 }; 130 131 /****************************************************************************** 132 * CM109 key interface 133 *****************************************************************************/ 134 135 static unsigned short special_keymap(int code) 136 { 137 if (code > 0xff) { 138 switch (code - 0xff) { 139 case RECORD_MUTE: return KEY_MICMUTE; 140 case PLAYBACK_MUTE: return KEY_MUTE; 141 case VOLUME_DOWN: return KEY_VOLUMEDOWN; 142 case VOLUME_UP: return KEY_VOLUMEUP; 143 } 144 } 145 return KEY_RESERVED; 146 } 147 148 /* Map device buttons to internal key events. 149 * 150 * The "up" and "down" keys, are symbolised by arrows on the button. 151 * The "pickup" and "hangup" keys are symbolised by a green and red phone 152 * on the button. 153 154 Komunikate KIP1000 Keyboard Matrix 155 156 -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10) 157 | | | | 158 <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20) 159 | | | | 160 END - 7 -- 8 -- 9 --> GPI pin 6 (0x40) 161 | | | | 162 OK -- * -- 0 -- # --> GPI pin 7 (0x80) 163 | | | | 164 165 /|\ /|\ /|\ /|\ 166 | | | | 167 GPO 168 pin: 3 2 1 0 169 0x8 0x4 0x2 0x1 170 171 */ 172 static unsigned short keymap_kip1000(int scancode) 173 { 174 switch (scancode) { /* phone key: */ 175 case 0x82: return KEY_NUMERIC_0; /* 0 */ 176 case 0x14: return KEY_NUMERIC_1; /* 1 */ 177 case 0x12: return KEY_NUMERIC_2; /* 2 */ 178 case 0x11: return KEY_NUMERIC_3; /* 3 */ 179 case 0x24: return KEY_NUMERIC_4; /* 4 */ 180 case 0x22: return KEY_NUMERIC_5; /* 5 */ 181 case 0x21: return KEY_NUMERIC_6; /* 6 */ 182 case 0x44: return KEY_NUMERIC_7; /* 7 */ 183 case 0x42: return KEY_NUMERIC_8; /* 8 */ 184 case 0x41: return KEY_NUMERIC_9; /* 9 */ 185 case 0x81: return KEY_NUMERIC_POUND; /* # */ 186 case 0x84: return KEY_NUMERIC_STAR; /* * */ 187 case 0x88: return KEY_ENTER; /* pickup */ 188 case 0x48: return KEY_ESC; /* hangup */ 189 case 0x28: return KEY_LEFT; /* IN */ 190 case 0x18: return KEY_RIGHT; /* OUT */ 191 default: return special_keymap(scancode); 192 } 193 } 194 195 /* 196 Contributed by Shaun Jackman <sjackman@gmail.com> 197 198 Genius G-Talk keyboard matrix 199 0 1 2 3 200 4: 0 4 8 Talk 201 5: 1 5 9 End 202 6: 2 6 # Up 203 7: 3 7 * Down 204 */ 205 static unsigned short keymap_gtalk(int scancode) 206 { 207 switch (scancode) { 208 case 0x11: return KEY_NUMERIC_0; 209 case 0x21: return KEY_NUMERIC_1; 210 case 0x41: return KEY_NUMERIC_2; 211 case 0x81: return KEY_NUMERIC_3; 212 case 0x12: return KEY_NUMERIC_4; 213 case 0x22: return KEY_NUMERIC_5; 214 case 0x42: return KEY_NUMERIC_6; 215 case 0x82: return KEY_NUMERIC_7; 216 case 0x14: return KEY_NUMERIC_8; 217 case 0x24: return KEY_NUMERIC_9; 218 case 0x44: return KEY_NUMERIC_POUND; /* # */ 219 case 0x84: return KEY_NUMERIC_STAR; /* * */ 220 case 0x18: return KEY_ENTER; /* Talk (green handset) */ 221 case 0x28: return KEY_ESC; /* End (red handset) */ 222 case 0x48: return KEY_UP; /* Menu up (rocker switch) */ 223 case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */ 224 default: return special_keymap(scancode); 225 } 226 } 227 228 /* 229 * Keymap for Allied-Telesis Corega USBPH01 230 * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html 231 * 232 * Contributed by july@nat.bg 233 */ 234 static unsigned short keymap_usbph01(int scancode) 235 { 236 switch (scancode) { 237 case 0x11: return KEY_NUMERIC_0; /* 0 */ 238 case 0x21: return KEY_NUMERIC_1; /* 1 */ 239 case 0x41: return KEY_NUMERIC_2; /* 2 */ 240 case 0x81: return KEY_NUMERIC_3; /* 3 */ 241 case 0x12: return KEY_NUMERIC_4; /* 4 */ 242 case 0x22: return KEY_NUMERIC_5; /* 5 */ 243 case 0x42: return KEY_NUMERIC_6; /* 6 */ 244 case 0x82: return KEY_NUMERIC_7; /* 7 */ 245 case 0x14: return KEY_NUMERIC_8; /* 8 */ 246 case 0x24: return KEY_NUMERIC_9; /* 9 */ 247 case 0x44: return KEY_NUMERIC_POUND; /* # */ 248 case 0x84: return KEY_NUMERIC_STAR; /* * */ 249 case 0x18: return KEY_ENTER; /* pickup */ 250 case 0x28: return KEY_ESC; /* hangup */ 251 case 0x48: return KEY_LEFT; /* IN */ 252 case 0x88: return KEY_RIGHT; /* OUT */ 253 default: return special_keymap(scancode); 254 } 255 } 256 257 /* 258 * Keymap for ATCom AU-100 259 * http://www.atcom.cn/products.html 260 * http://www.packetizer.com/products/au100/ 261 * http://www.voip-info.org/wiki/view/AU-100 262 * 263 * Contributed by daniel@gimpelevich.san-francisco.ca.us 264 */ 265 static unsigned short keymap_atcom(int scancode) 266 { 267 switch (scancode) { /* phone key: */ 268 case 0x82: return KEY_NUMERIC_0; /* 0 */ 269 case 0x11: return KEY_NUMERIC_1; /* 1 */ 270 case 0x12: return KEY_NUMERIC_2; /* 2 */ 271 case 0x14: return KEY_NUMERIC_3; /* 3 */ 272 case 0x21: return KEY_NUMERIC_4; /* 4 */ 273 case 0x22: return KEY_NUMERIC_5; /* 5 */ 274 case 0x24: return KEY_NUMERIC_6; /* 6 */ 275 case 0x41: return KEY_NUMERIC_7; /* 7 */ 276 case 0x42: return KEY_NUMERIC_8; /* 8 */ 277 case 0x44: return KEY_NUMERIC_9; /* 9 */ 278 case 0x84: return KEY_NUMERIC_POUND; /* # */ 279 case 0x81: return KEY_NUMERIC_STAR; /* * */ 280 case 0x18: return KEY_ENTER; /* pickup */ 281 case 0x28: return KEY_ESC; /* hangup */ 282 case 0x48: return KEY_LEFT; /* left arrow */ 283 case 0x88: return KEY_RIGHT; /* right arrow */ 284 default: return special_keymap(scancode); 285 } 286 } 287 288 static unsigned short (*keymap)(int) = keymap_kip1000; 289 290 /* 291 * Completes a request by converting the data into events for the 292 * input subsystem. 293 */ 294 static void report_key(struct cm109_dev *dev, int key) 295 { 296 struct input_dev *idev = dev->idev; 297 298 if (dev->key_code >= 0) { 299 /* old key up */ 300 input_report_key(idev, dev->key_code, 0); 301 } 302 303 dev->key_code = key; 304 if (key >= 0) { 305 /* new valid key */ 306 input_report_key(idev, key, 1); 307 } 308 309 input_sync(idev); 310 } 311 312 /* 313 * Converts data of special key presses (volume, mute) into events 314 * for the input subsystem, sends press-n-release for mute keys. 315 */ 316 static void cm109_report_special(struct cm109_dev *dev) 317 { 318 static const u8 autorelease = RECORD_MUTE | PLAYBACK_MUTE; 319 struct input_dev *idev = dev->idev; 320 u8 data = dev->irq_data->byte[HID_IR0]; 321 unsigned short keycode; 322 int i; 323 324 for (i = 0; i < 4; i++) { 325 keycode = dev->keymap[0xff + BIT(i)]; 326 if (keycode == KEY_RESERVED) 327 continue; 328 329 input_report_key(idev, keycode, data & BIT(i)); 330 if (data & autorelease & BIT(i)) { 331 input_sync(idev); 332 input_report_key(idev, keycode, 0); 333 } 334 } 335 input_sync(idev); 336 } 337 338 /****************************************************************************** 339 * CM109 usb communication interface 340 *****************************************************************************/ 341 342 static void cm109_submit_buzz_toggle(struct cm109_dev *dev) 343 { 344 int error; 345 346 if (dev->buzzer_state) 347 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; 348 else 349 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; 350 351 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); 352 if (error) 353 dev_err(&dev->intf->dev, 354 "%s: usb_submit_urb (urb_ctl) failed %d\n", 355 __func__, error); 356 } 357 358 /* 359 * IRQ handler 360 */ 361 static void cm109_urb_irq_callback(struct urb *urb) 362 { 363 struct cm109_dev *dev = urb->context; 364 const int status = urb->status; 365 int error; 366 unsigned long flags; 367 368 dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n", 369 dev->irq_data->byte[0], 370 dev->irq_data->byte[1], 371 dev->irq_data->byte[2], 372 dev->irq_data->byte[3], 373 dev->keybit); 374 375 if (status) { 376 if (status == -ESHUTDOWN) 377 return; 378 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", 379 __func__, status); 380 goto out; 381 } 382 383 /* Special keys */ 384 cm109_report_special(dev); 385 386 /* Scan key column */ 387 if (dev->keybit == 0xf) { 388 389 /* Any changes ? */ 390 if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0)) 391 goto out; 392 393 dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0; 394 dev->keybit = 0x1; 395 } else { 396 report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]); 397 398 dev->keybit <<= 1; 399 if (dev->keybit > 0x8) 400 dev->keybit = 0xf; 401 } 402 403 out: 404 405 spin_lock_irqsave(&dev->ctl_submit_lock, flags); 406 407 dev->irq_urb_pending = 0; 408 409 if (likely(!dev->shutdown)) { 410 411 if (dev->buzzer_state) 412 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; 413 else 414 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; 415 416 dev->ctl_data->byte[HID_OR1] = dev->keybit; 417 dev->ctl_data->byte[HID_OR2] = dev->keybit; 418 419 dev->buzzer_pending = 0; 420 dev->ctl_urb_pending = 1; 421 422 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); 423 if (error) 424 dev_err(&dev->intf->dev, 425 "%s: usb_submit_urb (urb_ctl) failed %d\n", 426 __func__, error); 427 } 428 429 spin_unlock_irqrestore(&dev->ctl_submit_lock, flags); 430 } 431 432 static void cm109_urb_ctl_callback(struct urb *urb) 433 { 434 struct cm109_dev *dev = urb->context; 435 const int status = urb->status; 436 int error; 437 unsigned long flags; 438 439 dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n", 440 dev->ctl_data->byte[0], 441 dev->ctl_data->byte[1], 442 dev->ctl_data->byte[2], 443 dev->ctl_data->byte[3]); 444 445 if (status) { 446 if (status == -ESHUTDOWN) 447 return; 448 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", 449 __func__, status); 450 } 451 452 spin_lock_irqsave(&dev->ctl_submit_lock, flags); 453 454 dev->ctl_urb_pending = 0; 455 456 if (likely(!dev->shutdown)) { 457 458 if (dev->buzzer_pending || status) { 459 dev->buzzer_pending = 0; 460 dev->ctl_urb_pending = 1; 461 cm109_submit_buzz_toggle(dev); 462 } else if (likely(!dev->irq_urb_pending)) { 463 /* ask for key data */ 464 dev->irq_urb_pending = 1; 465 error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC); 466 if (error) 467 dev_err(&dev->intf->dev, 468 "%s: usb_submit_urb (urb_irq) failed %d\n", 469 __func__, error); 470 } 471 } 472 473 spin_unlock_irqrestore(&dev->ctl_submit_lock, flags); 474 } 475 476 static void cm109_toggle_buzzer_async(struct cm109_dev *dev) 477 { 478 unsigned long flags; 479 480 spin_lock_irqsave(&dev->ctl_submit_lock, flags); 481 482 if (dev->ctl_urb_pending) { 483 /* URB completion will resubmit */ 484 dev->buzzer_pending = 1; 485 } else { 486 dev->ctl_urb_pending = 1; 487 cm109_submit_buzz_toggle(dev); 488 } 489 490 spin_unlock_irqrestore(&dev->ctl_submit_lock, flags); 491 } 492 493 static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) 494 { 495 int error; 496 497 if (on) 498 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; 499 else 500 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; 501 502 error = usb_control_msg(dev->udev, 503 usb_sndctrlpipe(dev->udev, 0), 504 dev->ctl_req->bRequest, 505 dev->ctl_req->bRequestType, 506 le16_to_cpu(dev->ctl_req->wValue), 507 le16_to_cpu(dev->ctl_req->wIndex), 508 dev->ctl_data, 509 USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); 510 if (error < 0 && error != -EINTR) 511 dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n", 512 __func__, error); 513 } 514 515 static void cm109_stop_traffic(struct cm109_dev *dev) 516 { 517 dev->shutdown = 1; 518 /* 519 * Make sure other CPUs see this 520 */ 521 smp_wmb(); 522 523 usb_kill_urb(dev->urb_ctl); 524 usb_kill_urb(dev->urb_irq); 525 526 cm109_toggle_buzzer_sync(dev, 0); 527 528 dev->shutdown = 0; 529 smp_wmb(); 530 } 531 532 static void cm109_restore_state(struct cm109_dev *dev) 533 { 534 if (dev->open) { 535 /* 536 * Restore buzzer state. 537 * This will also kick regular URB submission 538 */ 539 cm109_toggle_buzzer_async(dev); 540 } 541 } 542 543 /****************************************************************************** 544 * input event interface 545 *****************************************************************************/ 546 547 static int cm109_input_open(struct input_dev *idev) 548 { 549 struct cm109_dev *dev = input_get_drvdata(idev); 550 int error; 551 552 error = usb_autopm_get_interface(dev->intf); 553 if (error < 0) { 554 dev_err(&idev->dev, "%s - cannot autoresume, result %d\n", 555 __func__, error); 556 return error; 557 } 558 559 mutex_lock(&dev->pm_mutex); 560 561 dev->buzzer_state = 0; 562 dev->key_code = -1; /* no keys pressed */ 563 dev->keybit = 0xf; 564 565 /* issue INIT */ 566 dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF; 567 dev->ctl_data->byte[HID_OR1] = dev->keybit; 568 dev->ctl_data->byte[HID_OR2] = dev->keybit; 569 dev->ctl_data->byte[HID_OR3] = 0x00; 570 571 error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL); 572 if (error) 573 dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", 574 __func__, error); 575 else 576 dev->open = 1; 577 578 mutex_unlock(&dev->pm_mutex); 579 580 if (error) 581 usb_autopm_put_interface(dev->intf); 582 583 return error; 584 } 585 586 static void cm109_input_close(struct input_dev *idev) 587 { 588 struct cm109_dev *dev = input_get_drvdata(idev); 589 590 mutex_lock(&dev->pm_mutex); 591 592 /* 593 * Once we are here event delivery is stopped so we 594 * don't need to worry about someone starting buzzer 595 * again 596 */ 597 cm109_stop_traffic(dev); 598 dev->open = 0; 599 600 mutex_unlock(&dev->pm_mutex); 601 602 usb_autopm_put_interface(dev->intf); 603 } 604 605 static int cm109_input_ev(struct input_dev *idev, unsigned int type, 606 unsigned int code, int value) 607 { 608 struct cm109_dev *dev = input_get_drvdata(idev); 609 610 dev_dbg(&dev->intf->dev, 611 "input_ev: type=%u code=%u value=%d\n", type, code, value); 612 613 if (type != EV_SND) 614 return -EINVAL; 615 616 switch (code) { 617 case SND_TONE: 618 case SND_BELL: 619 dev->buzzer_state = !!value; 620 if (!dev->resetting) 621 cm109_toggle_buzzer_async(dev); 622 return 0; 623 624 default: 625 return -EINVAL; 626 } 627 } 628 629 630 /****************************************************************************** 631 * Linux interface and usb initialisation 632 *****************************************************************************/ 633 634 struct driver_info { 635 char *name; 636 }; 637 638 static const struct driver_info info_cm109 = { 639 .name = "CM109 USB driver", 640 }; 641 642 enum { 643 VENDOR_ID = 0x0d8c, /* C-Media Electronics */ 644 PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */ 645 }; 646 647 /* table of devices that work with this driver */ 648 static const struct usb_device_id cm109_usb_table[] = { 649 { 650 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | 651 USB_DEVICE_ID_MATCH_INT_INFO, 652 .idVendor = VENDOR_ID, 653 .idProduct = PRODUCT_ID_CM109, 654 .bInterfaceClass = USB_CLASS_HID, 655 .bInterfaceSubClass = 0, 656 .bInterfaceProtocol = 0, 657 .driver_info = (kernel_ulong_t) &info_cm109 658 }, 659 /* you can add more devices here with product ID 0x0008 - 0x000f */ 660 { } 661 }; 662 663 static void cm109_usb_cleanup(struct cm109_dev *dev) 664 { 665 kfree(dev->ctl_req); 666 if (dev->ctl_data) 667 usb_free_coherent(dev->udev, USB_PKT_LEN, 668 dev->ctl_data, dev->ctl_dma); 669 if (dev->irq_data) 670 usb_free_coherent(dev->udev, USB_PKT_LEN, 671 dev->irq_data, dev->irq_dma); 672 673 usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */ 674 usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */ 675 kfree(dev); 676 } 677 678 static void cm109_usb_disconnect(struct usb_interface *interface) 679 { 680 struct cm109_dev *dev = usb_get_intfdata(interface); 681 682 usb_set_intfdata(interface, NULL); 683 input_unregister_device(dev->idev); 684 cm109_usb_cleanup(dev); 685 } 686 687 static int cm109_usb_probe(struct usb_interface *intf, 688 const struct usb_device_id *id) 689 { 690 struct usb_device *udev = interface_to_usbdev(intf); 691 struct driver_info *nfo = (struct driver_info *)id->driver_info; 692 struct usb_host_interface *interface; 693 struct usb_endpoint_descriptor *endpoint; 694 struct cm109_dev *dev; 695 struct input_dev *input_dev = NULL; 696 int ret, pipe, i; 697 int error = -ENOMEM; 698 699 interface = intf->cur_altsetting; 700 701 if (interface->desc.bNumEndpoints < 1) 702 return -ENODEV; 703 704 endpoint = &interface->endpoint[0].desc; 705 706 if (!usb_endpoint_is_int_in(endpoint)) 707 return -ENODEV; 708 709 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 710 if (!dev) 711 return -ENOMEM; 712 713 spin_lock_init(&dev->ctl_submit_lock); 714 mutex_init(&dev->pm_mutex); 715 716 dev->udev = udev; 717 dev->intf = intf; 718 719 dev->idev = input_dev = input_allocate_device(); 720 if (!input_dev) 721 goto err_out; 722 723 /* allocate usb buffers */ 724 dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN, 725 GFP_KERNEL, &dev->irq_dma); 726 if (!dev->irq_data) 727 goto err_out; 728 729 dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN, 730 GFP_KERNEL, &dev->ctl_dma); 731 if (!dev->ctl_data) 732 goto err_out; 733 734 dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL); 735 if (!dev->ctl_req) 736 goto err_out; 737 738 /* allocate urb structures */ 739 dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL); 740 if (!dev->urb_irq) 741 goto err_out; 742 743 dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL); 744 if (!dev->urb_ctl) 745 goto err_out; 746 747 /* get a handle to the interrupt data pipe */ 748 pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); 749 ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); 750 if (ret != USB_PKT_LEN) 751 dev_err(&intf->dev, "invalid payload size %d, expected %d\n", 752 ret, USB_PKT_LEN); 753 754 /* initialise irq urb */ 755 usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data, 756 USB_PKT_LEN, 757 cm109_urb_irq_callback, dev, endpoint->bInterval); 758 dev->urb_irq->transfer_dma = dev->irq_dma; 759 dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 760 dev->urb_irq->dev = udev; 761 762 /* initialise ctl urb */ 763 dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | 764 USB_DIR_OUT; 765 dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION; 766 dev->ctl_req->wValue = cpu_to_le16(0x200); 767 dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber); 768 dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN); 769 770 usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0), 771 (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN, 772 cm109_urb_ctl_callback, dev); 773 dev->urb_ctl->transfer_dma = dev->ctl_dma; 774 dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 775 dev->urb_ctl->dev = udev; 776 777 /* find out the physical bus location */ 778 usb_make_path(udev, dev->phys, sizeof(dev->phys)); 779 strlcat(dev->phys, "/input0", sizeof(dev->phys)); 780 781 /* register settings for the input device */ 782 input_dev->name = nfo->name; 783 input_dev->phys = dev->phys; 784 usb_to_input_id(udev, &input_dev->id); 785 input_dev->dev.parent = &intf->dev; 786 787 input_set_drvdata(input_dev, dev); 788 input_dev->open = cm109_input_open; 789 input_dev->close = cm109_input_close; 790 input_dev->event = cm109_input_ev; 791 792 input_dev->keycode = dev->keymap; 793 input_dev->keycodesize = sizeof(unsigned char); 794 input_dev->keycodemax = ARRAY_SIZE(dev->keymap); 795 796 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND); 797 input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE); 798 799 /* register available key events */ 800 for (i = 0; i < KEYMAP_SIZE; i++) { 801 unsigned short k = keymap(i); 802 dev->keymap[i] = k; 803 __set_bit(k, input_dev->keybit); 804 } 805 __clear_bit(KEY_RESERVED, input_dev->keybit); 806 807 error = input_register_device(dev->idev); 808 if (error) 809 goto err_out; 810 811 usb_set_intfdata(intf, dev); 812 813 return 0; 814 815 err_out: 816 input_free_device(input_dev); 817 cm109_usb_cleanup(dev); 818 return error; 819 } 820 821 static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message) 822 { 823 struct cm109_dev *dev = usb_get_intfdata(intf); 824 825 dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event); 826 827 mutex_lock(&dev->pm_mutex); 828 cm109_stop_traffic(dev); 829 mutex_unlock(&dev->pm_mutex); 830 831 return 0; 832 } 833 834 static int cm109_usb_resume(struct usb_interface *intf) 835 { 836 struct cm109_dev *dev = usb_get_intfdata(intf); 837 838 dev_info(&intf->dev, "cm109: usb_resume\n"); 839 840 mutex_lock(&dev->pm_mutex); 841 cm109_restore_state(dev); 842 mutex_unlock(&dev->pm_mutex); 843 844 return 0; 845 } 846 847 static int cm109_usb_pre_reset(struct usb_interface *intf) 848 { 849 struct cm109_dev *dev = usb_get_intfdata(intf); 850 851 mutex_lock(&dev->pm_mutex); 852 853 /* 854 * Make sure input events don't try to toggle buzzer 855 * while we are resetting 856 */ 857 dev->resetting = 1; 858 smp_wmb(); 859 860 cm109_stop_traffic(dev); 861 862 return 0; 863 } 864 865 static int cm109_usb_post_reset(struct usb_interface *intf) 866 { 867 struct cm109_dev *dev = usb_get_intfdata(intf); 868 869 dev->resetting = 0; 870 smp_wmb(); 871 872 cm109_restore_state(dev); 873 874 mutex_unlock(&dev->pm_mutex); 875 876 return 0; 877 } 878 879 static struct usb_driver cm109_driver = { 880 .name = "cm109", 881 .probe = cm109_usb_probe, 882 .disconnect = cm109_usb_disconnect, 883 .suspend = cm109_usb_suspend, 884 .resume = cm109_usb_resume, 885 .reset_resume = cm109_usb_resume, 886 .pre_reset = cm109_usb_pre_reset, 887 .post_reset = cm109_usb_post_reset, 888 .id_table = cm109_usb_table, 889 .supports_autosuspend = 1, 890 }; 891 892 static int __init cm109_select_keymap(void) 893 { 894 /* Load the phone keymap */ 895 if (!strcasecmp(phone, "kip1000")) { 896 keymap = keymap_kip1000; 897 printk(KERN_INFO KBUILD_MODNAME ": " 898 "Keymap for Komunikate KIP1000 phone loaded\n"); 899 } else if (!strcasecmp(phone, "gtalk")) { 900 keymap = keymap_gtalk; 901 printk(KERN_INFO KBUILD_MODNAME ": " 902 "Keymap for Genius G-talk phone loaded\n"); 903 } else if (!strcasecmp(phone, "usbph01")) { 904 keymap = keymap_usbph01; 905 printk(KERN_INFO KBUILD_MODNAME ": " 906 "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n"); 907 } else if (!strcasecmp(phone, "atcom")) { 908 keymap = keymap_atcom; 909 printk(KERN_INFO KBUILD_MODNAME ": " 910 "Keymap for ATCom AU-100 phone loaded\n"); 911 } else { 912 printk(KERN_ERR KBUILD_MODNAME ": " 913 "Unsupported phone: %s\n", phone); 914 return -EINVAL; 915 } 916 917 return 0; 918 } 919 920 static int __init cm109_init(void) 921 { 922 int err; 923 924 err = cm109_select_keymap(); 925 if (err) 926 return err; 927 928 err = usb_register(&cm109_driver); 929 if (err) 930 return err; 931 932 printk(KERN_INFO KBUILD_MODNAME ": " 933 DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n"); 934 935 return 0; 936 } 937 938 static void __exit cm109_exit(void) 939 { 940 usb_deregister(&cm109_driver); 941 } 942 943 module_init(cm109_init); 944 module_exit(cm109_exit); 945 946 MODULE_DEVICE_TABLE(usb, cm109_usb_table); 947 948 MODULE_AUTHOR(DRIVER_AUTHOR); 949 MODULE_DESCRIPTION(DRIVER_DESC); 950 MODULE_LICENSE("GPL"); 951