1 /* 2 * Copyright (c) 2011 Bosch Sensortec GmbH 3 * Copyright (c) 2011 Unixphere 4 * 5 * This driver adds support for Bosch Sensortec's digital acceleration 6 * sensors BMA150 and SMB380. 7 * The SMB380 is fully compatible with BMA150 and only differs in packaging. 8 * 9 * The datasheet for the BMA150 chip can be found here: 10 * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMA150-DS000-07.pdf 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2 of the License, or 15 * (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 */ 26 #include <linux/kernel.h> 27 #include <linux/module.h> 28 #include <linux/i2c.h> 29 #include <linux/input.h> 30 #include <linux/input-polldev.h> 31 #include <linux/interrupt.h> 32 #include <linux/delay.h> 33 #include <linux/slab.h> 34 #include <linux/pm.h> 35 #include <linux/pm_runtime.h> 36 #include <linux/bma150.h> 37 38 #define ABSMAX_ACC_VAL 0x01FF 39 #define ABSMIN_ACC_VAL -(ABSMAX_ACC_VAL) 40 41 /* Each axis is represented by a 2-byte data word */ 42 #define BMA150_XYZ_DATA_SIZE 6 43 44 /* Input poll interval in milliseconds */ 45 #define BMA150_POLL_INTERVAL 10 46 #define BMA150_POLL_MAX 200 47 #define BMA150_POLL_MIN 0 48 49 #define BMA150_BW_25HZ 0 50 #define BMA150_BW_50HZ 1 51 #define BMA150_BW_100HZ 2 52 #define BMA150_BW_190HZ 3 53 #define BMA150_BW_375HZ 4 54 #define BMA150_BW_750HZ 5 55 #define BMA150_BW_1500HZ 6 56 57 #define BMA150_RANGE_2G 0 58 #define BMA150_RANGE_4G 1 59 #define BMA150_RANGE_8G 2 60 61 #define BMA150_MODE_NORMAL 0 62 #define BMA150_MODE_SLEEP 2 63 #define BMA150_MODE_WAKE_UP 3 64 65 /* Data register addresses */ 66 #define BMA150_DATA_0_REG 0x00 67 #define BMA150_DATA_1_REG 0x01 68 #define BMA150_DATA_2_REG 0x02 69 70 /* Control register addresses */ 71 #define BMA150_CTRL_0_REG 0x0A 72 #define BMA150_CTRL_1_REG 0x0B 73 #define BMA150_CTRL_2_REG 0x14 74 #define BMA150_CTRL_3_REG 0x15 75 76 /* Configuration/Setting register addresses */ 77 #define BMA150_CFG_0_REG 0x0C 78 #define BMA150_CFG_1_REG 0x0D 79 #define BMA150_CFG_2_REG 0x0E 80 #define BMA150_CFG_3_REG 0x0F 81 #define BMA150_CFG_4_REG 0x10 82 #define BMA150_CFG_5_REG 0x11 83 84 #define BMA150_CHIP_ID 2 85 #define BMA150_CHIP_ID_REG BMA150_DATA_0_REG 86 87 #define BMA150_ACC_X_LSB_REG BMA150_DATA_2_REG 88 89 #define BMA150_SLEEP_POS 0 90 #define BMA150_SLEEP_MSK 0x01 91 #define BMA150_SLEEP_REG BMA150_CTRL_0_REG 92 93 #define BMA150_BANDWIDTH_POS 0 94 #define BMA150_BANDWIDTH_MSK 0x07 95 #define BMA150_BANDWIDTH_REG BMA150_CTRL_2_REG 96 97 #define BMA150_RANGE_POS 3 98 #define BMA150_RANGE_MSK 0x18 99 #define BMA150_RANGE_REG BMA150_CTRL_2_REG 100 101 #define BMA150_WAKE_UP_POS 0 102 #define BMA150_WAKE_UP_MSK 0x01 103 #define BMA150_WAKE_UP_REG BMA150_CTRL_3_REG 104 105 #define BMA150_SW_RES_POS 1 106 #define BMA150_SW_RES_MSK 0x02 107 #define BMA150_SW_RES_REG BMA150_CTRL_0_REG 108 109 /* Any-motion interrupt register fields */ 110 #define BMA150_ANY_MOTION_EN_POS 6 111 #define BMA150_ANY_MOTION_EN_MSK 0x40 112 #define BMA150_ANY_MOTION_EN_REG BMA150_CTRL_1_REG 113 114 #define BMA150_ANY_MOTION_DUR_POS 6 115 #define BMA150_ANY_MOTION_DUR_MSK 0xC0 116 #define BMA150_ANY_MOTION_DUR_REG BMA150_CFG_5_REG 117 118 #define BMA150_ANY_MOTION_THRES_REG BMA150_CFG_4_REG 119 120 /* Advanced interrupt register fields */ 121 #define BMA150_ADV_INT_EN_POS 6 122 #define BMA150_ADV_INT_EN_MSK 0x40 123 #define BMA150_ADV_INT_EN_REG BMA150_CTRL_3_REG 124 125 /* High-G interrupt register fields */ 126 #define BMA150_HIGH_G_EN_POS 1 127 #define BMA150_HIGH_G_EN_MSK 0x02 128 #define BMA150_HIGH_G_EN_REG BMA150_CTRL_1_REG 129 130 #define BMA150_HIGH_G_HYST_POS 3 131 #define BMA150_HIGH_G_HYST_MSK 0x38 132 #define BMA150_HIGH_G_HYST_REG BMA150_CFG_5_REG 133 134 #define BMA150_HIGH_G_DUR_REG BMA150_CFG_3_REG 135 #define BMA150_HIGH_G_THRES_REG BMA150_CFG_2_REG 136 137 /* Low-G interrupt register fields */ 138 #define BMA150_LOW_G_EN_POS 0 139 #define BMA150_LOW_G_EN_MSK 0x01 140 #define BMA150_LOW_G_EN_REG BMA150_CTRL_1_REG 141 142 #define BMA150_LOW_G_HYST_POS 0 143 #define BMA150_LOW_G_HYST_MSK 0x07 144 #define BMA150_LOW_G_HYST_REG BMA150_CFG_5_REG 145 146 #define BMA150_LOW_G_DUR_REG BMA150_CFG_1_REG 147 #define BMA150_LOW_G_THRES_REG BMA150_CFG_0_REG 148 149 struct bma150_data { 150 struct i2c_client *client; 151 struct input_polled_dev *input_polled; 152 struct input_dev *input; 153 u8 mode; 154 }; 155 156 /* 157 * The settings for the given range, bandwidth and interrupt features 158 * are stated and verified by Bosch Sensortec where they are configured 159 * to provide a generic sensitivity performance. 160 */ 161 static struct bma150_cfg default_cfg __devinitdata = { 162 .any_motion_int = 1, 163 .hg_int = 1, 164 .lg_int = 1, 165 .any_motion_dur = 0, 166 .any_motion_thres = 0, 167 .hg_hyst = 0, 168 .hg_dur = 150, 169 .hg_thres = 160, 170 .lg_hyst = 0, 171 .lg_dur = 150, 172 .lg_thres = 20, 173 .range = BMA150_RANGE_2G, 174 .bandwidth = BMA150_BW_50HZ 175 }; 176 177 static int bma150_write_byte(struct i2c_client *client, u8 reg, u8 val) 178 { 179 s32 ret; 180 181 /* As per specification, disable irq in between register writes */ 182 if (client->irq) 183 disable_irq_nosync(client->irq); 184 185 ret = i2c_smbus_write_byte_data(client, reg, val); 186 187 if (client->irq) 188 enable_irq(client->irq); 189 190 return ret; 191 } 192 193 static int bma150_set_reg_bits(struct i2c_client *client, 194 int val, int shift, u8 mask, u8 reg) 195 { 196 int data; 197 198 data = i2c_smbus_read_byte_data(client, reg); 199 if (data < 0) 200 return data; 201 202 data = (data & ~mask) | ((val << shift) & mask); 203 return bma150_write_byte(client, reg, data); 204 } 205 206 static int bma150_set_mode(struct bma150_data *bma150, u8 mode) 207 { 208 int error; 209 210 error = bma150_set_reg_bits(bma150->client, mode, BMA150_WAKE_UP_POS, 211 BMA150_WAKE_UP_MSK, BMA150_WAKE_UP_REG); 212 if (error) 213 return error; 214 215 error = bma150_set_reg_bits(bma150->client, mode, BMA150_SLEEP_POS, 216 BMA150_SLEEP_MSK, BMA150_SLEEP_REG); 217 if (error) 218 return error; 219 220 if (mode == BMA150_MODE_NORMAL) 221 msleep(2); 222 223 bma150->mode = mode; 224 return 0; 225 } 226 227 static int __devinit bma150_soft_reset(struct bma150_data *bma150) 228 { 229 int error; 230 231 error = bma150_set_reg_bits(bma150->client, 1, BMA150_SW_RES_POS, 232 BMA150_SW_RES_MSK, BMA150_SW_RES_REG); 233 if (error) 234 return error; 235 236 msleep(2); 237 return 0; 238 } 239 240 static int __devinit bma150_set_range(struct bma150_data *bma150, u8 range) 241 { 242 return bma150_set_reg_bits(bma150->client, range, BMA150_RANGE_POS, 243 BMA150_RANGE_MSK, BMA150_RANGE_REG); 244 } 245 246 static int __devinit bma150_set_bandwidth(struct bma150_data *bma150, u8 bw) 247 { 248 return bma150_set_reg_bits(bma150->client, bw, BMA150_BANDWIDTH_POS, 249 BMA150_BANDWIDTH_MSK, BMA150_BANDWIDTH_REG); 250 } 251 252 static int __devinit bma150_set_low_g_interrupt(struct bma150_data *bma150, 253 u8 enable, u8 hyst, u8 dur, u8 thres) 254 { 255 int error; 256 257 error = bma150_set_reg_bits(bma150->client, hyst, 258 BMA150_LOW_G_HYST_POS, BMA150_LOW_G_HYST_MSK, 259 BMA150_LOW_G_HYST_REG); 260 if (error) 261 return error; 262 263 error = bma150_write_byte(bma150->client, BMA150_LOW_G_DUR_REG, dur); 264 if (error) 265 return error; 266 267 error = bma150_write_byte(bma150->client, BMA150_LOW_G_THRES_REG, thres); 268 if (error) 269 return error; 270 271 return bma150_set_reg_bits(bma150->client, !!enable, 272 BMA150_LOW_G_EN_POS, BMA150_LOW_G_EN_MSK, 273 BMA150_LOW_G_EN_REG); 274 } 275 276 static int __devinit bma150_set_high_g_interrupt(struct bma150_data *bma150, 277 u8 enable, u8 hyst, u8 dur, u8 thres) 278 { 279 int error; 280 281 error = bma150_set_reg_bits(bma150->client, hyst, 282 BMA150_HIGH_G_HYST_POS, BMA150_HIGH_G_HYST_MSK, 283 BMA150_HIGH_G_HYST_REG); 284 if (error) 285 return error; 286 287 error = bma150_write_byte(bma150->client, 288 BMA150_HIGH_G_DUR_REG, dur); 289 if (error) 290 return error; 291 292 error = bma150_write_byte(bma150->client, 293 BMA150_HIGH_G_THRES_REG, thres); 294 if (error) 295 return error; 296 297 return bma150_set_reg_bits(bma150->client, !!enable, 298 BMA150_HIGH_G_EN_POS, BMA150_HIGH_G_EN_MSK, 299 BMA150_HIGH_G_EN_REG); 300 } 301 302 303 static int __devinit bma150_set_any_motion_interrupt(struct bma150_data *bma150, 304 u8 enable, u8 dur, u8 thres) 305 { 306 int error; 307 308 error = bma150_set_reg_bits(bma150->client, dur, 309 BMA150_ANY_MOTION_DUR_POS, 310 BMA150_ANY_MOTION_DUR_MSK, 311 BMA150_ANY_MOTION_DUR_REG); 312 if (error) 313 return error; 314 315 error = bma150_write_byte(bma150->client, 316 BMA150_ANY_MOTION_THRES_REG, thres); 317 if (error) 318 return error; 319 320 error = bma150_set_reg_bits(bma150->client, !!enable, 321 BMA150_ADV_INT_EN_POS, BMA150_ADV_INT_EN_MSK, 322 BMA150_ADV_INT_EN_REG); 323 if (error) 324 return error; 325 326 return bma150_set_reg_bits(bma150->client, !!enable, 327 BMA150_ANY_MOTION_EN_POS, 328 BMA150_ANY_MOTION_EN_MSK, 329 BMA150_ANY_MOTION_EN_REG); 330 } 331 332 static void bma150_report_xyz(struct bma150_data *bma150) 333 { 334 u8 data[BMA150_XYZ_DATA_SIZE]; 335 s16 x, y, z; 336 s32 ret; 337 338 ret = i2c_smbus_read_i2c_block_data(bma150->client, 339 BMA150_ACC_X_LSB_REG, BMA150_XYZ_DATA_SIZE, data); 340 if (ret != BMA150_XYZ_DATA_SIZE) 341 return; 342 343 x = ((0xc0 & data[0]) >> 6) | (data[1] << 2); 344 y = ((0xc0 & data[2]) >> 6) | (data[3] << 2); 345 z = ((0xc0 & data[4]) >> 6) | (data[5] << 2); 346 347 /* sign extension */ 348 x = (s16) (x << 6) >> 6; 349 y = (s16) (y << 6) >> 6; 350 z = (s16) (z << 6) >> 6; 351 352 input_report_abs(bma150->input, ABS_X, x); 353 input_report_abs(bma150->input, ABS_Y, y); 354 input_report_abs(bma150->input, ABS_Z, z); 355 input_sync(bma150->input); 356 } 357 358 static irqreturn_t bma150_irq_thread(int irq, void *dev) 359 { 360 bma150_report_xyz(dev); 361 362 return IRQ_HANDLED; 363 } 364 365 static void bma150_poll(struct input_polled_dev *dev) 366 { 367 bma150_report_xyz(dev->private); 368 } 369 370 static int bma150_open(struct bma150_data *bma150) 371 { 372 int error; 373 374 error = pm_runtime_get_sync(&bma150->client->dev); 375 if (error && error != -ENOSYS) 376 return error; 377 378 /* 379 * See if runtime PM woke up the device. If runtime PM 380 * is disabled we need to do it ourselves. 381 */ 382 if (bma150->mode != BMA150_MODE_NORMAL) { 383 error = bma150_set_mode(bma150, BMA150_MODE_NORMAL); 384 if (error) 385 return error; 386 } 387 388 return 0; 389 } 390 391 static void bma150_close(struct bma150_data *bma150) 392 { 393 pm_runtime_put_sync(&bma150->client->dev); 394 395 if (bma150->mode != BMA150_MODE_SLEEP) 396 bma150_set_mode(bma150, BMA150_MODE_SLEEP); 397 } 398 399 static int bma150_irq_open(struct input_dev *input) 400 { 401 struct bma150_data *bma150 = input_get_drvdata(input); 402 403 return bma150_open(bma150); 404 } 405 406 static void bma150_irq_close(struct input_dev *input) 407 { 408 struct bma150_data *bma150 = input_get_drvdata(input); 409 410 bma150_close(bma150); 411 } 412 413 static void bma150_poll_open(struct input_polled_dev *ipoll_dev) 414 { 415 struct bma150_data *bma150 = ipoll_dev->private; 416 417 bma150_open(bma150); 418 } 419 420 static void bma150_poll_close(struct input_polled_dev *ipoll_dev) 421 { 422 struct bma150_data *bma150 = ipoll_dev->private; 423 424 bma150_close(bma150); 425 } 426 427 static int __devinit bma150_initialize(struct bma150_data *bma150, 428 const struct bma150_cfg *cfg) 429 { 430 int error; 431 432 error = bma150_soft_reset(bma150); 433 if (error) 434 return error; 435 436 error = bma150_set_bandwidth(bma150, cfg->bandwidth); 437 if (error) 438 return error; 439 440 error = bma150_set_range(bma150, cfg->range); 441 if (error) 442 return error; 443 444 if (bma150->client->irq) { 445 error = bma150_set_any_motion_interrupt(bma150, 446 cfg->any_motion_int, 447 cfg->any_motion_dur, 448 cfg->any_motion_thres); 449 if (error) 450 return error; 451 452 error = bma150_set_high_g_interrupt(bma150, 453 cfg->hg_int, cfg->hg_hyst, 454 cfg->hg_dur, cfg->hg_thres); 455 if (error) 456 return error; 457 458 error = bma150_set_low_g_interrupt(bma150, 459 cfg->lg_int, cfg->lg_hyst, 460 cfg->lg_dur, cfg->lg_thres); 461 if (error) 462 return error; 463 } 464 465 return bma150_set_mode(bma150, BMA150_MODE_SLEEP); 466 } 467 468 static void __devinit bma150_init_input_device(struct bma150_data *bma150, 469 struct input_dev *idev) 470 { 471 idev->name = BMA150_DRIVER; 472 idev->phys = BMA150_DRIVER "/input0"; 473 idev->id.bustype = BUS_I2C; 474 idev->dev.parent = &bma150->client->dev; 475 476 idev->evbit[0] = BIT_MASK(EV_ABS); 477 input_set_abs_params(idev, ABS_X, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0); 478 input_set_abs_params(idev, ABS_Y, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0); 479 input_set_abs_params(idev, ABS_Z, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0); 480 } 481 482 static int __devinit bma150_register_input_device(struct bma150_data *bma150) 483 { 484 struct input_dev *idev; 485 int error; 486 487 idev = input_allocate_device(); 488 if (!idev) 489 return -ENOMEM; 490 491 bma150_init_input_device(bma150, idev); 492 493 idev->open = bma150_irq_open; 494 idev->close = bma150_irq_close; 495 input_set_drvdata(idev, bma150); 496 497 error = input_register_device(idev); 498 if (error) { 499 input_free_device(idev); 500 return error; 501 } 502 503 bma150->input = idev; 504 return 0; 505 } 506 507 static int __devinit bma150_register_polled_device(struct bma150_data *bma150) 508 { 509 struct input_polled_dev *ipoll_dev; 510 int error; 511 512 ipoll_dev = input_allocate_polled_device(); 513 if (!ipoll_dev) 514 return -ENOMEM; 515 516 ipoll_dev->private = bma150; 517 ipoll_dev->open = bma150_poll_open; 518 ipoll_dev->close = bma150_poll_close; 519 ipoll_dev->poll = bma150_poll; 520 ipoll_dev->poll_interval = BMA150_POLL_INTERVAL; 521 ipoll_dev->poll_interval_min = BMA150_POLL_MIN; 522 ipoll_dev->poll_interval_max = BMA150_POLL_MAX; 523 524 bma150_init_input_device(bma150, ipoll_dev->input); 525 526 error = input_register_polled_device(ipoll_dev); 527 if (error) { 528 input_free_polled_device(ipoll_dev); 529 return error; 530 } 531 532 bma150->input_polled = ipoll_dev; 533 bma150->input = ipoll_dev->input; 534 535 return 0; 536 } 537 538 static int __devinit bma150_probe(struct i2c_client *client, 539 const struct i2c_device_id *id) 540 { 541 const struct bma150_platform_data *pdata = client->dev.platform_data; 542 const struct bma150_cfg *cfg; 543 struct bma150_data *bma150; 544 int chip_id; 545 int error; 546 547 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { 548 dev_err(&client->dev, "i2c_check_functionality error\n"); 549 return -EIO; 550 } 551 552 chip_id = i2c_smbus_read_byte_data(client, BMA150_CHIP_ID_REG); 553 if (chip_id != BMA150_CHIP_ID) { 554 dev_err(&client->dev, "BMA150 chip id error: %d\n", chip_id); 555 return -EINVAL; 556 } 557 558 bma150 = kzalloc(sizeof(struct bma150_data), GFP_KERNEL); 559 if (!bma150) 560 return -ENOMEM; 561 562 bma150->client = client; 563 564 if (pdata) { 565 if (pdata->irq_gpio_cfg) { 566 error = pdata->irq_gpio_cfg(); 567 if (error) { 568 dev_err(&client->dev, 569 "IRQ GPIO conf. error %d, error %d\n", 570 client->irq, error); 571 goto err_free_mem; 572 } 573 } 574 cfg = &pdata->cfg; 575 } else { 576 cfg = &default_cfg; 577 } 578 579 error = bma150_initialize(bma150, cfg); 580 if (error) 581 goto err_free_mem; 582 583 if (client->irq > 0) { 584 error = bma150_register_input_device(bma150); 585 if (error) 586 goto err_free_mem; 587 588 error = request_threaded_irq(client->irq, 589 NULL, bma150_irq_thread, 590 IRQF_TRIGGER_RISING | IRQF_ONESHOT, 591 BMA150_DRIVER, bma150); 592 if (error) { 593 dev_err(&client->dev, 594 "irq request failed %d, error %d\n", 595 client->irq, error); 596 input_unregister_device(bma150->input); 597 goto err_free_mem; 598 } 599 } else { 600 error = bma150_register_polled_device(bma150); 601 if (error) 602 goto err_free_mem; 603 } 604 605 i2c_set_clientdata(client, bma150); 606 607 pm_runtime_enable(&client->dev); 608 609 return 0; 610 611 err_free_mem: 612 kfree(bma150); 613 return error; 614 } 615 616 static int __devexit bma150_remove(struct i2c_client *client) 617 { 618 struct bma150_data *bma150 = i2c_get_clientdata(client); 619 620 pm_runtime_disable(&client->dev); 621 622 if (client->irq > 0) { 623 free_irq(client->irq, bma150); 624 input_unregister_device(bma150->input); 625 } else { 626 input_unregister_polled_device(bma150->input_polled); 627 input_free_polled_device(bma150->input_polled); 628 } 629 630 kfree(bma150); 631 632 return 0; 633 } 634 635 #ifdef CONFIG_PM 636 static int bma150_suspend(struct device *dev) 637 { 638 struct i2c_client *client = to_i2c_client(dev); 639 struct bma150_data *bma150 = i2c_get_clientdata(client); 640 641 return bma150_set_mode(bma150, BMA150_MODE_SLEEP); 642 } 643 644 static int bma150_resume(struct device *dev) 645 { 646 struct i2c_client *client = to_i2c_client(dev); 647 struct bma150_data *bma150 = i2c_get_clientdata(client); 648 649 return bma150_set_mode(bma150, BMA150_MODE_NORMAL); 650 } 651 #endif 652 653 static UNIVERSAL_DEV_PM_OPS(bma150_pm, bma150_suspend, bma150_resume, NULL); 654 655 static const struct i2c_device_id bma150_id[] = { 656 { "bma150", 0 }, 657 { "smb380", 0 }, 658 { "bma023", 0 }, 659 { } 660 }; 661 662 MODULE_DEVICE_TABLE(i2c, bma150_id); 663 664 static struct i2c_driver bma150_driver = { 665 .driver = { 666 .owner = THIS_MODULE, 667 .name = BMA150_DRIVER, 668 .pm = &bma150_pm, 669 }, 670 .class = I2C_CLASS_HWMON, 671 .id_table = bma150_id, 672 .probe = bma150_probe, 673 .remove = __devexit_p(bma150_remove), 674 }; 675 676 module_i2c_driver(bma150_driver); 677 678 MODULE_AUTHOR("Albert Zhang <xu.zhang@bosch-sensortec.com>"); 679 MODULE_DESCRIPTION("BMA150 driver"); 680 MODULE_LICENSE("GPL"); 681