xref: /openbmc/linux/drivers/input/misc/ad714x-spi.c (revision b830f94f)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * AD714X CapTouch Programmable Controller driver (SPI bus)
4  *
5  * Copyright 2009-2011 Analog Devices Inc.
6  */
7 
8 #include <linux/input.h>	/* BUS_SPI */
9 #include <linux/module.h>
10 #include <linux/spi/spi.h>
11 #include <linux/pm.h>
12 #include <linux/types.h>
13 #include "ad714x.h"
14 
15 #define AD714x_SPI_CMD_PREFIX      0xE000   /* bits 15:11 */
16 #define AD714x_SPI_READ            BIT(10)
17 
18 static int __maybe_unused ad714x_spi_suspend(struct device *dev)
19 {
20 	return ad714x_disable(spi_get_drvdata(to_spi_device(dev)));
21 }
22 
23 static int __maybe_unused ad714x_spi_resume(struct device *dev)
24 {
25 	return ad714x_enable(spi_get_drvdata(to_spi_device(dev)));
26 }
27 
28 static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume);
29 
30 static int ad714x_spi_read(struct ad714x_chip *chip,
31 			   unsigned short reg, unsigned short *data, size_t len)
32 {
33 	struct spi_device *spi = to_spi_device(chip->dev);
34 	struct spi_message message;
35 	struct spi_transfer xfer[2];
36 	int i;
37 	int error;
38 
39 	spi_message_init(&message);
40 	memset(xfer, 0, sizeof(xfer));
41 
42 	chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX |
43 					AD714x_SPI_READ | reg);
44 	xfer[0].tx_buf = &chip->xfer_buf[0];
45 	xfer[0].len = sizeof(chip->xfer_buf[0]);
46 	spi_message_add_tail(&xfer[0], &message);
47 
48 	xfer[1].rx_buf = &chip->xfer_buf[1];
49 	xfer[1].len = sizeof(chip->xfer_buf[1]) * len;
50 	spi_message_add_tail(&xfer[1], &message);
51 
52 	error = spi_sync(spi, &message);
53 	if (unlikely(error)) {
54 		dev_err(chip->dev, "SPI read error: %d\n", error);
55 		return error;
56 	}
57 
58 	for (i = 0; i < len; i++)
59 		data[i] = be16_to_cpu(chip->xfer_buf[i + 1]);
60 
61 	return 0;
62 }
63 
64 static int ad714x_spi_write(struct ad714x_chip *chip,
65 			    unsigned short reg, unsigned short data)
66 {
67 	struct spi_device *spi = to_spi_device(chip->dev);
68 	int error;
69 
70 	chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | reg);
71 	chip->xfer_buf[1] = cpu_to_be16(data);
72 
73 	error = spi_write(spi, (u8 *)chip->xfer_buf,
74 			  2 * sizeof(*chip->xfer_buf));
75 	if (unlikely(error)) {
76 		dev_err(chip->dev, "SPI write error: %d\n", error);
77 		return error;
78 	}
79 
80 	return 0;
81 }
82 
83 static int ad714x_spi_probe(struct spi_device *spi)
84 {
85 	struct ad714x_chip *chip;
86 	int err;
87 
88 	spi->bits_per_word = 8;
89 	err = spi_setup(spi);
90 	if (err < 0)
91 		return err;
92 
93 	chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq,
94 			    ad714x_spi_read, ad714x_spi_write);
95 	if (IS_ERR(chip))
96 		return PTR_ERR(chip);
97 
98 	spi_set_drvdata(spi, chip);
99 
100 	return 0;
101 }
102 
103 static struct spi_driver ad714x_spi_driver = {
104 	.driver = {
105 		.name	= "ad714x_captouch",
106 		.pm	= &ad714x_spi_pm,
107 	},
108 	.probe		= ad714x_spi_probe,
109 };
110 
111 module_spi_driver(ad714x_spi_driver);
112 
113 MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor SPI Bus Driver");
114 MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
115 MODULE_LICENSE("GPL");
116