xref: /openbmc/linux/drivers/input/misc/ad714x-spi.c (revision 2bad466c)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * AD714X CapTouch Programmable Controller driver (SPI bus)
4  *
5  * Copyright 2009-2011 Analog Devices Inc.
6  */
7 
8 #include <linux/input.h>	/* BUS_SPI */
9 #include <linux/module.h>
10 #include <linux/spi/spi.h>
11 #include <linux/pm.h>
12 #include <linux/types.h>
13 #include "ad714x.h"
14 
15 #define AD714x_SPI_CMD_PREFIX      0xE000   /* bits 15:11 */
16 #define AD714x_SPI_READ            BIT(10)
17 
18 static int ad714x_spi_read(struct ad714x_chip *chip,
19 			   unsigned short reg, unsigned short *data, size_t len)
20 {
21 	struct spi_device *spi = to_spi_device(chip->dev);
22 	struct spi_message message;
23 	struct spi_transfer xfer[2];
24 	int i;
25 	int error;
26 
27 	spi_message_init(&message);
28 	memset(xfer, 0, sizeof(xfer));
29 
30 	chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX |
31 					AD714x_SPI_READ | reg);
32 	xfer[0].tx_buf = &chip->xfer_buf[0];
33 	xfer[0].len = sizeof(chip->xfer_buf[0]);
34 	spi_message_add_tail(&xfer[0], &message);
35 
36 	xfer[1].rx_buf = &chip->xfer_buf[1];
37 	xfer[1].len = sizeof(chip->xfer_buf[1]) * len;
38 	spi_message_add_tail(&xfer[1], &message);
39 
40 	error = spi_sync(spi, &message);
41 	if (unlikely(error)) {
42 		dev_err(chip->dev, "SPI read error: %d\n", error);
43 		return error;
44 	}
45 
46 	for (i = 0; i < len; i++)
47 		data[i] = be16_to_cpu(chip->xfer_buf[i + 1]);
48 
49 	return 0;
50 }
51 
52 static int ad714x_spi_write(struct ad714x_chip *chip,
53 			    unsigned short reg, unsigned short data)
54 {
55 	struct spi_device *spi = to_spi_device(chip->dev);
56 	int error;
57 
58 	chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | reg);
59 	chip->xfer_buf[1] = cpu_to_be16(data);
60 
61 	error = spi_write(spi, (u8 *)chip->xfer_buf,
62 			  2 * sizeof(*chip->xfer_buf));
63 	if (unlikely(error)) {
64 		dev_err(chip->dev, "SPI write error: %d\n", error);
65 		return error;
66 	}
67 
68 	return 0;
69 }
70 
71 static int ad714x_spi_probe(struct spi_device *spi)
72 {
73 	struct ad714x_chip *chip;
74 	int err;
75 
76 	spi->bits_per_word = 8;
77 	err = spi_setup(spi);
78 	if (err < 0)
79 		return err;
80 
81 	chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq,
82 			    ad714x_spi_read, ad714x_spi_write);
83 	if (IS_ERR(chip))
84 		return PTR_ERR(chip);
85 
86 	spi_set_drvdata(spi, chip);
87 
88 	return 0;
89 }
90 
91 static struct spi_driver ad714x_spi_driver = {
92 	.driver = {
93 		.name	= "ad714x_captouch",
94 		.pm	= pm_sleep_ptr(&ad714x_pm),
95 	},
96 	.probe		= ad714x_spi_probe,
97 };
98 
99 module_spi_driver(ad714x_spi_driver);
100 
101 MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor SPI Bus Driver");
102 MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
103 MODULE_LICENSE("GPL");
104