1 /* 2 * Copyright (C) ST-Ericsson SA 2010 3 * 4 * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson 5 * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson 6 * 7 * License terms:GNU General Public License (GPL) version 2 8 * 9 * Keypad controller driver for the SKE (Scroll Key Encoder) module used in 10 * the Nomadik 8815 and Ux500 platforms. 11 */ 12 13 #include <linux/platform_device.h> 14 #include <linux/interrupt.h> 15 #include <linux/spinlock.h> 16 #include <linux/io.h> 17 #include <linux/delay.h> 18 #include <linux/input.h> 19 #include <linux/slab.h> 20 #include <linux/clk.h> 21 #include <linux/module.h> 22 23 #include <linux/platform_data/keypad-nomadik-ske.h> 24 25 /* SKE_CR bits */ 26 #define SKE_KPMLT (0x1 << 6) 27 #define SKE_KPCN (0x7 << 3) 28 #define SKE_KPASEN (0x1 << 2) 29 #define SKE_KPASON (0x1 << 7) 30 31 /* SKE_IMSC bits */ 32 #define SKE_KPIMA (0x1 << 2) 33 34 /* SKE_ICR bits */ 35 #define SKE_KPICS (0x1 << 3) 36 #define SKE_KPICA (0x1 << 2) 37 38 /* SKE_RIS bits */ 39 #define SKE_KPRISA (0x1 << 2) 40 41 #define SKE_KEYPAD_ROW_SHIFT 3 42 #define SKE_KPD_NUM_ROWS 8 43 #define SKE_KPD_NUM_COLS 8 44 45 /* keypad auto scan registers */ 46 #define SKE_ASR0 0x20 47 #define SKE_ASR1 0x24 48 #define SKE_ASR2 0x28 49 #define SKE_ASR3 0x2C 50 51 #define SKE_NUM_ASRX_REGISTERS (4) 52 #define KEY_PRESSED_DELAY 10 53 54 /** 55 * struct ske_keypad - data structure used by keypad driver 56 * @irq: irq no 57 * @reg_base: ske regsiters base address 58 * @input: pointer to input device object 59 * @board: keypad platform device 60 * @keymap: matrix scan code table for keycodes 61 * @clk: clock structure pointer 62 */ 63 struct ske_keypad { 64 int irq; 65 void __iomem *reg_base; 66 struct input_dev *input; 67 const struct ske_keypad_platform_data *board; 68 unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS]; 69 struct clk *clk; 70 struct clk *pclk; 71 spinlock_t ske_keypad_lock; 72 }; 73 74 static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr, 75 u8 mask, u8 data) 76 { 77 u32 ret; 78 79 spin_lock(&keypad->ske_keypad_lock); 80 81 ret = readl(keypad->reg_base + addr); 82 ret &= ~mask; 83 ret |= data; 84 writel(ret, keypad->reg_base + addr); 85 86 spin_unlock(&keypad->ske_keypad_lock); 87 } 88 89 /* 90 * ske_keypad_chip_init: init keypad controller configuration 91 * 92 * Enable Multi key press detection, auto scan mode 93 */ 94 static int __init ske_keypad_chip_init(struct ske_keypad *keypad) 95 { 96 u32 value; 97 int timeout = keypad->board->debounce_ms; 98 99 /* check SKE_RIS to be 0 */ 100 while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--) 101 cpu_relax(); 102 103 if (!timeout) 104 return -EINVAL; 105 106 /* 107 * set debounce value 108 * keypad dbounce is configured in DBCR[15:8] 109 * dbounce value in steps of 32/32.768 ms 110 */ 111 spin_lock(&keypad->ske_keypad_lock); 112 value = readl(keypad->reg_base + SKE_DBCR); 113 value = value & 0xff; 114 value |= ((keypad->board->debounce_ms * 32000)/32768) << 8; 115 writel(value, keypad->reg_base + SKE_DBCR); 116 spin_unlock(&keypad->ske_keypad_lock); 117 118 /* enable multi key detection */ 119 ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT); 120 121 /* 122 * set up the number of columns 123 * KPCN[5:3] defines no. of keypad columns to be auto scanned 124 */ 125 value = (keypad->board->kcol - 1) << 3; 126 ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value); 127 128 /* clear keypad interrupt for auto(and pending SW) scans */ 129 ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS); 130 131 /* un-mask keypad interrupts */ 132 ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); 133 134 /* enable automatic scan */ 135 ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN); 136 137 return 0; 138 } 139 140 static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col) 141 { 142 int row = 0, code, pos; 143 struct input_dev *input = keypad->input; 144 u32 ske_ris; 145 int key_pressed; 146 int num_of_rows; 147 148 /* find out the row */ 149 num_of_rows = hweight8(status); 150 do { 151 pos = __ffs(status); 152 row = pos; 153 status &= ~(1 << pos); 154 155 code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT); 156 ske_ris = readl(keypad->reg_base + SKE_RIS); 157 key_pressed = ske_ris & SKE_KPRISA; 158 159 input_event(input, EV_MSC, MSC_SCAN, code); 160 input_report_key(input, keypad->keymap[code], key_pressed); 161 input_sync(input); 162 num_of_rows--; 163 } while (num_of_rows); 164 } 165 166 static void ske_keypad_read_data(struct ske_keypad *keypad) 167 { 168 u8 status; 169 int col = 0; 170 int ske_asr, i; 171 172 /* 173 * Read the auto scan registers 174 * 175 * Each SKE_ASRx (x=0 to x=3) contains two row values. 176 * lower byte contains row value for column 2*x, 177 * upper byte contains row value for column 2*x + 1 178 */ 179 for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) { 180 ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i)); 181 if (!ske_asr) 182 continue; 183 184 /* now that ASRx is zero, find out the coloumn x and row y */ 185 status = ske_asr & 0xff; 186 if (status) { 187 col = i * 2; 188 ske_keypad_report(keypad, status, col); 189 } 190 status = (ske_asr & 0xff00) >> 8; 191 if (status) { 192 col = (i * 2) + 1; 193 ske_keypad_report(keypad, status, col); 194 } 195 } 196 } 197 198 static irqreturn_t ske_keypad_irq(int irq, void *dev_id) 199 { 200 struct ske_keypad *keypad = dev_id; 201 int timeout = keypad->board->debounce_ms; 202 203 /* disable auto scan interrupt; mask the interrupt generated */ 204 ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); 205 ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA); 206 207 while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout) 208 cpu_relax(); 209 210 /* SKEx registers are stable and can be read */ 211 ske_keypad_read_data(keypad); 212 213 /* wait until raw interrupt is clear */ 214 while ((readl(keypad->reg_base + SKE_RIS)) && --timeout) 215 msleep(KEY_PRESSED_DELAY); 216 217 /* enable auto scan interrupts */ 218 ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); 219 220 return IRQ_HANDLED; 221 } 222 223 static int __init ske_keypad_probe(struct platform_device *pdev) 224 { 225 const struct ske_keypad_platform_data *plat = pdev->dev.platform_data; 226 struct ske_keypad *keypad; 227 struct input_dev *input; 228 struct resource *res; 229 int irq; 230 int error; 231 232 if (!plat) { 233 dev_err(&pdev->dev, "invalid keypad platform data\n"); 234 return -EINVAL; 235 } 236 237 irq = platform_get_irq(pdev, 0); 238 if (irq < 0) { 239 dev_err(&pdev->dev, "failed to get keypad irq\n"); 240 return -EINVAL; 241 } 242 243 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 244 if (!res) { 245 dev_err(&pdev->dev, "missing platform resources\n"); 246 return -EINVAL; 247 } 248 249 keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL); 250 input = input_allocate_device(); 251 if (!keypad || !input) { 252 dev_err(&pdev->dev, "failed to allocate keypad memory\n"); 253 error = -ENOMEM; 254 goto err_free_mem; 255 } 256 257 keypad->irq = irq; 258 keypad->board = plat; 259 keypad->input = input; 260 spin_lock_init(&keypad->ske_keypad_lock); 261 262 if (!request_mem_region(res->start, resource_size(res), pdev->name)) { 263 dev_err(&pdev->dev, "failed to request I/O memory\n"); 264 error = -EBUSY; 265 goto err_free_mem; 266 } 267 268 keypad->reg_base = ioremap(res->start, resource_size(res)); 269 if (!keypad->reg_base) { 270 dev_err(&pdev->dev, "failed to remap I/O memory\n"); 271 error = -ENXIO; 272 goto err_free_mem_region; 273 } 274 275 keypad->pclk = clk_get(&pdev->dev, "apb_pclk"); 276 if (IS_ERR(keypad->pclk)) { 277 dev_err(&pdev->dev, "failed to get pclk\n"); 278 error = PTR_ERR(keypad->pclk); 279 goto err_iounmap; 280 } 281 282 keypad->clk = clk_get(&pdev->dev, NULL); 283 if (IS_ERR(keypad->clk)) { 284 dev_err(&pdev->dev, "failed to get clk\n"); 285 error = PTR_ERR(keypad->clk); 286 goto err_pclk; 287 } 288 289 input->id.bustype = BUS_HOST; 290 input->name = "ux500-ske-keypad"; 291 input->dev.parent = &pdev->dev; 292 293 error = matrix_keypad_build_keymap(plat->keymap_data, NULL, 294 SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS, 295 keypad->keymap, input); 296 if (error) { 297 dev_err(&pdev->dev, "Failed to build keymap\n"); 298 goto err_clk; 299 } 300 301 input_set_capability(input, EV_MSC, MSC_SCAN); 302 if (!plat->no_autorepeat) 303 __set_bit(EV_REP, input->evbit); 304 305 error = clk_prepare_enable(keypad->pclk); 306 if (error) { 307 dev_err(&pdev->dev, "Failed to prepare/enable pclk\n"); 308 goto err_clk; 309 } 310 311 error = clk_prepare_enable(keypad->clk); 312 if (error) { 313 dev_err(&pdev->dev, "Failed to prepare/enable clk\n"); 314 goto err_pclk_disable; 315 } 316 317 318 /* go through board initialization helpers */ 319 if (keypad->board->init) 320 keypad->board->init(); 321 322 error = ske_keypad_chip_init(keypad); 323 if (error) { 324 dev_err(&pdev->dev, "unable to init keypad hardware\n"); 325 goto err_clk_disable; 326 } 327 328 error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq, 329 IRQF_ONESHOT, "ske-keypad", keypad); 330 if (error) { 331 dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq); 332 goto err_clk_disable; 333 } 334 335 error = input_register_device(input); 336 if (error) { 337 dev_err(&pdev->dev, 338 "unable to register input device: %d\n", error); 339 goto err_free_irq; 340 } 341 342 if (plat->wakeup_enable) 343 device_init_wakeup(&pdev->dev, true); 344 345 platform_set_drvdata(pdev, keypad); 346 347 return 0; 348 349 err_free_irq: 350 free_irq(keypad->irq, keypad); 351 err_clk_disable: 352 clk_disable_unprepare(keypad->clk); 353 err_pclk_disable: 354 clk_disable_unprepare(keypad->pclk); 355 err_clk: 356 clk_put(keypad->clk); 357 err_pclk: 358 clk_put(keypad->pclk); 359 err_iounmap: 360 iounmap(keypad->reg_base); 361 err_free_mem_region: 362 release_mem_region(res->start, resource_size(res)); 363 err_free_mem: 364 input_free_device(input); 365 kfree(keypad); 366 return error; 367 } 368 369 static int ske_keypad_remove(struct platform_device *pdev) 370 { 371 struct ske_keypad *keypad = platform_get_drvdata(pdev); 372 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 373 374 free_irq(keypad->irq, keypad); 375 376 input_unregister_device(keypad->input); 377 378 clk_disable_unprepare(keypad->clk); 379 clk_put(keypad->clk); 380 381 if (keypad->board->exit) 382 keypad->board->exit(); 383 384 iounmap(keypad->reg_base); 385 release_mem_region(res->start, resource_size(res)); 386 kfree(keypad); 387 388 return 0; 389 } 390 391 #ifdef CONFIG_PM_SLEEP 392 static int ske_keypad_suspend(struct device *dev) 393 { 394 struct platform_device *pdev = to_platform_device(dev); 395 struct ske_keypad *keypad = platform_get_drvdata(pdev); 396 int irq = platform_get_irq(pdev, 0); 397 398 if (device_may_wakeup(dev)) 399 enable_irq_wake(irq); 400 else 401 ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); 402 403 return 0; 404 } 405 406 static int ske_keypad_resume(struct device *dev) 407 { 408 struct platform_device *pdev = to_platform_device(dev); 409 struct ske_keypad *keypad = platform_get_drvdata(pdev); 410 int irq = platform_get_irq(pdev, 0); 411 412 if (device_may_wakeup(dev)) 413 disable_irq_wake(irq); 414 else 415 ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); 416 417 return 0; 418 } 419 #endif 420 421 static SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops, 422 ske_keypad_suspend, ske_keypad_resume); 423 424 static struct platform_driver ske_keypad_driver = { 425 .driver = { 426 .name = "nmk-ske-keypad", 427 .owner = THIS_MODULE, 428 .pm = &ske_keypad_dev_pm_ops, 429 }, 430 .remove = ske_keypad_remove, 431 }; 432 433 module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe); 434 435 MODULE_LICENSE("GPL v2"); 436 MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>"); 437 MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver"); 438 MODULE_ALIAS("platform:nomadik-ske-keypad"); 439