1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2022 MediaTek Inc.
4  * Author Fengping Yu <fengping.yu@mediatek.com>
5  */
6 #include <linux/bitops.h>
7 #include <linux/clk.h>
8 #include <linux/input/matrix_keypad.h>
9 #include <linux/interrupt.h>
10 #include <linux/module.h>
11 #include <linux/property.h>
12 #include <linux/platform_device.h>
13 #include <linux/regmap.h>
14 
15 #define MTK_KPD_NAME		"mt6779-keypad"
16 #define MTK_KPD_MEM		0x0004
17 #define MTK_KPD_DEBOUNCE	0x0018
18 #define MTK_KPD_DEBOUNCE_MASK	GENMASK(13, 0)
19 #define MTK_KPD_DEBOUNCE_MAX_MS	256
20 #define MTK_KPD_SEL		0x0020
21 #define MTK_KPD_SEL_COL	GENMASK(15, 10)
22 #define MTK_KPD_SEL_ROW	GENMASK(9, 4)
23 #define MTK_KPD_SEL_COLMASK(c)	GENMASK((c) + 9, 10)
24 #define MTK_KPD_SEL_ROWMASK(r)	GENMASK((r) + 3, 4)
25 #define MTK_KPD_NUM_MEMS	5
26 #define MTK_KPD_NUM_BITS	136	/* 4*32+8 MEM5 only use 8 BITS */
27 
28 struct mt6779_keypad {
29 	struct regmap *regmap;
30 	struct input_dev *input_dev;
31 	struct clk *clk;
32 	u32 n_rows;
33 	u32 n_cols;
34 	DECLARE_BITMAP(keymap_state, MTK_KPD_NUM_BITS);
35 };
36 
37 static const struct regmap_config mt6779_keypad_regmap_cfg = {
38 	.reg_bits = 32,
39 	.val_bits = 32,
40 	.reg_stride = sizeof(u32),
41 	.max_register = 36,
42 };
43 
44 static irqreturn_t mt6779_keypad_irq_handler(int irq, void *dev_id)
45 {
46 	struct mt6779_keypad *keypad = dev_id;
47 	const unsigned short *keycode = keypad->input_dev->keycode;
48 	DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS);
49 	DECLARE_BITMAP(change, MTK_KPD_NUM_BITS);
50 	unsigned int bit_nr, key;
51 	unsigned int row, col;
52 	unsigned int scancode;
53 	unsigned int row_shift = get_count_order(keypad->n_cols);
54 	bool pressed;
55 
56 	regmap_bulk_read(keypad->regmap, MTK_KPD_MEM,
57 			 new_state, MTK_KPD_NUM_MEMS);
58 
59 	bitmap_xor(change, new_state, keypad->keymap_state, MTK_KPD_NUM_BITS);
60 
61 	for_each_set_bit(bit_nr, change, MTK_KPD_NUM_BITS) {
62 		/*
63 		 * Registers are 32bits, but only bits [15:0] are used to
64 		 * indicate key status.
65 		 */
66 		if (bit_nr % 32 >= 16)
67 			continue;
68 
69 		key = bit_nr / 32 * 16 + bit_nr % 32;
70 		row = key / 9;
71 		col = key % 9;
72 
73 		scancode = MATRIX_SCAN_CODE(row, col, row_shift);
74 		/* 1: not pressed, 0: pressed */
75 		pressed = !test_bit(bit_nr, new_state);
76 		dev_dbg(&keypad->input_dev->dev, "%s",
77 			pressed ? "pressed" : "released");
78 
79 		input_event(keypad->input_dev, EV_MSC, MSC_SCAN, scancode);
80 		input_report_key(keypad->input_dev, keycode[scancode], pressed);
81 		input_sync(keypad->input_dev);
82 
83 		dev_dbg(&keypad->input_dev->dev,
84 			"report Linux keycode = %d\n", keycode[scancode]);
85 	}
86 
87 	bitmap_copy(keypad->keymap_state, new_state, MTK_KPD_NUM_BITS);
88 
89 	return IRQ_HANDLED;
90 }
91 
92 static void mt6779_keypad_clk_disable(void *data)
93 {
94 	clk_disable_unprepare(data);
95 }
96 
97 static int mt6779_keypad_pdrv_probe(struct platform_device *pdev)
98 {
99 	struct mt6779_keypad *keypad;
100 	void __iomem *base;
101 	int irq;
102 	u32 debounce;
103 	bool wakeup;
104 	int error;
105 
106 	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
107 	if (!keypad)
108 		return -ENOMEM;
109 
110 	base = devm_platform_ioremap_resource(pdev, 0);
111 	if (IS_ERR(base))
112 		return PTR_ERR(base);
113 
114 	keypad->regmap = devm_regmap_init_mmio(&pdev->dev, base,
115 					       &mt6779_keypad_regmap_cfg);
116 	if (IS_ERR(keypad->regmap)) {
117 		dev_err(&pdev->dev,
118 			"regmap init failed:%pe\n", keypad->regmap);
119 		return PTR_ERR(keypad->regmap);
120 	}
121 
122 	bitmap_fill(keypad->keymap_state, MTK_KPD_NUM_BITS);
123 
124 	keypad->input_dev = devm_input_allocate_device(&pdev->dev);
125 	if (!keypad->input_dev) {
126 		dev_err(&pdev->dev, "Failed to allocate input dev\n");
127 		return -ENOMEM;
128 	}
129 
130 	keypad->input_dev->name = MTK_KPD_NAME;
131 	keypad->input_dev->id.bustype = BUS_HOST;
132 
133 	error = matrix_keypad_parse_properties(&pdev->dev, &keypad->n_rows,
134 					       &keypad->n_cols);
135 	if (error) {
136 		dev_err(&pdev->dev, "Failed to parse keypad params\n");
137 		return error;
138 	}
139 
140 	if (device_property_read_u32(&pdev->dev, "debounce-delay-ms",
141 				     &debounce))
142 		debounce = 16;
143 
144 	if (debounce > MTK_KPD_DEBOUNCE_MAX_MS) {
145 		dev_err(&pdev->dev,
146 			"Debounce time exceeds the maximum allowed time %dms\n",
147 			MTK_KPD_DEBOUNCE_MAX_MS);
148 		return -EINVAL;
149 	}
150 
151 	wakeup = device_property_read_bool(&pdev->dev, "wakeup-source");
152 
153 	dev_dbg(&pdev->dev, "n_row=%d n_col=%d debounce=%d\n",
154 		keypad->n_rows, keypad->n_cols, debounce);
155 
156 	error = matrix_keypad_build_keymap(NULL, NULL,
157 					   keypad->n_rows, keypad->n_cols,
158 					   NULL, keypad->input_dev);
159 	if (error) {
160 		dev_err(&pdev->dev, "Failed to build keymap\n");
161 		return error;
162 	}
163 
164 	input_set_capability(keypad->input_dev, EV_MSC, MSC_SCAN);
165 
166 	regmap_write(keypad->regmap, MTK_KPD_DEBOUNCE,
167 		     (debounce * (1 << 5)) & MTK_KPD_DEBOUNCE_MASK);
168 
169 	regmap_update_bits(keypad->regmap, MTK_KPD_SEL, MTK_KPD_SEL_ROW,
170 			   MTK_KPD_SEL_ROWMASK(keypad->n_rows));
171 	regmap_update_bits(keypad->regmap, MTK_KPD_SEL, MTK_KPD_SEL_COL,
172 			   MTK_KPD_SEL_COLMASK(keypad->n_cols));
173 
174 	keypad->clk = devm_clk_get(&pdev->dev, "kpd");
175 	if (IS_ERR(keypad->clk))
176 		return PTR_ERR(keypad->clk);
177 
178 	error = clk_prepare_enable(keypad->clk);
179 	if (error) {
180 		dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n");
181 		return error;
182 	}
183 
184 	error = devm_add_action_or_reset(&pdev->dev, mt6779_keypad_clk_disable,
185 					 keypad->clk);
186 	if (error)
187 		return error;
188 
189 	irq = platform_get_irq(pdev, 0);
190 	if (irq < 0)
191 		return irq;
192 
193 	error = devm_request_threaded_irq(&pdev->dev, irq,
194 					  NULL, mt6779_keypad_irq_handler,
195 					  IRQF_ONESHOT, MTK_KPD_NAME, keypad);
196 	if (error) {
197 		dev_err(&pdev->dev, "Failed to request IRQ#%d: %d\n",
198 			irq, error);
199 		return error;
200 	}
201 
202 	error = input_register_device(keypad->input_dev);
203 	if (error) {
204 		dev_err(&pdev->dev, "Failed to register device\n");
205 		return error;
206 	}
207 
208 	error = device_init_wakeup(&pdev->dev, wakeup);
209 	if (error)
210 		dev_warn(&pdev->dev, "device_init_wakeup() failed: %d\n",
211 			 error);
212 
213 	return 0;
214 }
215 
216 static const struct of_device_id mt6779_keypad_of_match[] = {
217 	{ .compatible = "mediatek,mt6779-keypad" },
218 	{ .compatible = "mediatek,mt6873-keypad" },
219 	{ /* sentinel */ }
220 };
221 
222 static struct platform_driver mt6779_keypad_pdrv = {
223 	.probe = mt6779_keypad_pdrv_probe,
224 	.driver = {
225 		   .name = MTK_KPD_NAME,
226 		   .of_match_table = mt6779_keypad_of_match,
227 	},
228 };
229 module_platform_driver(mt6779_keypad_pdrv);
230 
231 MODULE_AUTHOR("Mediatek Corporation");
232 MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
233 MODULE_LICENSE("GPL");
234