1 /* 2 * linux/drivers/hil/hilkbd.c 3 * 4 * Copyright (C) 1998 Philip Blundell <philb@gnu.org> 5 * Copyright (C) 1999 Matthew Wilcox <willy@bofh.ai> 6 * Copyright (C) 1999-2007 Helge Deller <deller@gmx.de> 7 * 8 * Very basic HP Human Interface Loop (HIL) driver. 9 * This driver handles the keyboard on HP300 (m68k) and on some 10 * HP700 (parisc) series machines. 11 * 12 * 13 * This file is subject to the terms and conditions of the GNU General Public 14 * License version 2. See the file COPYING in the main directory of this 15 * archive for more details. 16 */ 17 18 #include <linux/pci_ids.h> 19 #include <linux/ioport.h> 20 #include <linux/module.h> 21 #include <linux/errno.h> 22 #include <linux/input.h> 23 #include <linux/init.h> 24 #include <linux/interrupt.h> 25 #include <linux/hil.h> 26 #include <linux/io.h> 27 #include <linux/sched.h> 28 #include <linux/spinlock.h> 29 #include <asm/irq.h> 30 #ifdef CONFIG_HP300 31 #include <asm/hwtest.h> 32 #endif 33 34 35 MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller"); 36 MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)"); 37 MODULE_LICENSE("GPL v2"); 38 39 40 #if defined(CONFIG_PARISC) 41 42 #include <asm/io.h> 43 #include <asm/hardware.h> 44 #include <asm/parisc-device.h> 45 static unsigned long hil_base; /* HPA for the HIL device */ 46 static unsigned int hil_irq; 47 #define HILBASE hil_base /* HPPA (parisc) port address */ 48 #define HIL_DATA 0x800 49 #define HIL_CMD 0x801 50 #define HIL_IRQ hil_irq 51 #define hil_readb(p) gsc_readb(p) 52 #define hil_writeb(v,p) gsc_writeb((v),(p)) 53 54 #elif defined(CONFIG_HP300) 55 56 #define HILBASE 0xf0428000UL /* HP300 (m68k) port address */ 57 #define HIL_DATA 0x1 58 #define HIL_CMD 0x3 59 #define HIL_IRQ 2 60 #define hil_readb(p) readb(p) 61 #define hil_writeb(v,p) writeb((v),(p)) 62 63 #else 64 #error "HIL is not supported on this platform" 65 #endif 66 67 68 69 /* HIL helper functions */ 70 71 #define hil_busy() (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY) 72 #define hil_data_available() (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY) 73 #define hil_status() (hil_readb(HILBASE + HIL_CMD)) 74 #define hil_command(x) do { hil_writeb((x), HILBASE + HIL_CMD); } while (0) 75 #define hil_read_data() (hil_readb(HILBASE + HIL_DATA)) 76 #define hil_write_data(x) do { hil_writeb((x), HILBASE + HIL_DATA); } while (0) 77 78 /* HIL constants */ 79 80 #define HIL_BUSY 0x02 81 #define HIL_DATA_RDY 0x01 82 83 #define HIL_SETARD 0xA0 /* set auto-repeat delay */ 84 #define HIL_SETARR 0xA2 /* set auto-repeat rate */ 85 #define HIL_SETTONE 0xA3 /* set tone generator */ 86 #define HIL_CNMT 0xB2 /* clear nmi */ 87 #define HIL_INTON 0x5C /* Turn on interrupts. */ 88 #define HIL_INTOFF 0x5D /* Turn off interrupts. */ 89 90 #define HIL_READKBDSADR 0xF9 91 #define HIL_WRITEKBDSADR 0xE9 92 93 static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly = 94 { HIL_KEYCODES_SET1 }; 95 96 /* HIL structure */ 97 static struct { 98 struct input_dev *dev; 99 100 unsigned int curdev; 101 102 unsigned char s; 103 unsigned char c; 104 int valid; 105 106 unsigned char data[16]; 107 unsigned int ptr; 108 spinlock_t lock; 109 110 void *dev_id; /* native bus device */ 111 } hil_dev; 112 113 114 static void poll_finished(void) 115 { 116 int down; 117 int key; 118 unsigned char scode; 119 120 switch (hil_dev.data[0]) { 121 case 0x40: 122 down = (hil_dev.data[1] & 1) == 0; 123 scode = hil_dev.data[1] >> 1; 124 key = hphilkeyb_keycode[scode]; 125 input_report_key(hil_dev.dev, key, down); 126 break; 127 } 128 hil_dev.curdev = 0; 129 } 130 131 132 static inline void handle_status(unsigned char s, unsigned char c) 133 { 134 if (c & 0x8) { 135 /* End of block */ 136 if (c & 0x10) 137 poll_finished(); 138 } else { 139 if (c & 0x10) { 140 if (hil_dev.curdev) 141 poll_finished(); /* just in case */ 142 hil_dev.curdev = c & 7; 143 hil_dev.ptr = 0; 144 } 145 } 146 } 147 148 149 static inline void handle_data(unsigned char s, unsigned char c) 150 { 151 if (hil_dev.curdev) { 152 hil_dev.data[hil_dev.ptr++] = c; 153 hil_dev.ptr &= 15; 154 } 155 } 156 157 158 /* handle HIL interrupts */ 159 static irqreturn_t hil_interrupt(int irq, void *handle) 160 { 161 unsigned char s, c; 162 163 s = hil_status(); 164 c = hil_read_data(); 165 166 switch (s >> 4) { 167 case 0x5: 168 handle_status(s, c); 169 break; 170 case 0x6: 171 handle_data(s, c); 172 break; 173 case 0x4: 174 hil_dev.s = s; 175 hil_dev.c = c; 176 mb(); 177 hil_dev.valid = 1; 178 break; 179 } 180 return IRQ_HANDLED; 181 } 182 183 184 /* send a command to the HIL */ 185 static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len) 186 { 187 unsigned long flags; 188 189 spin_lock_irqsave(&hil_dev.lock, flags); 190 while (hil_busy()) 191 /* wait */; 192 hil_command(cmd); 193 while (len--) { 194 while (hil_busy()) 195 /* wait */; 196 hil_write_data(*(data++)); 197 } 198 spin_unlock_irqrestore(&hil_dev.lock, flags); 199 } 200 201 202 /* initialize HIL */ 203 static int __devinit hil_keyb_init(void) 204 { 205 unsigned char c; 206 unsigned int i, kbid; 207 wait_queue_head_t hil_wait; 208 int err; 209 210 if (hil_dev.dev) 211 return -ENODEV; /* already initialized */ 212 213 init_waitqueue_head(&hil_wait); 214 spin_lock_init(&hil_dev.lock); 215 216 hil_dev.dev = input_allocate_device(); 217 if (!hil_dev.dev) 218 return -ENOMEM; 219 220 err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id); 221 if (err) { 222 printk(KERN_ERR "HIL: Can't get IRQ\n"); 223 goto err1; 224 } 225 226 /* Turn on interrupts */ 227 hil_do(HIL_INTON, NULL, 0); 228 229 /* Look for keyboards */ 230 hil_dev.valid = 0; /* clear any pending data */ 231 hil_do(HIL_READKBDSADR, NULL, 0); 232 233 wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ); 234 if (!hil_dev.valid) 235 printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n"); 236 237 c = hil_dev.c; 238 hil_dev.valid = 0; 239 if (c == 0) { 240 kbid = -1; 241 printk(KERN_WARNING "HIL: no keyboard present\n"); 242 } else { 243 kbid = ffz(~c); 244 printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid); 245 } 246 247 /* set it to raw mode */ 248 c = 0; 249 hil_do(HIL_WRITEKBDSADR, &c, 1); 250 251 for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++) 252 if (hphilkeyb_keycode[i] != KEY_RESERVED) 253 __set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit); 254 255 hil_dev.dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); 256 hil_dev.dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | 257 BIT_MASK(LED_SCROLLL); 258 hil_dev.dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; 259 hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]); 260 hil_dev.dev->keycode = hphilkeyb_keycode; 261 hil_dev.dev->name = "HIL keyboard"; 262 hil_dev.dev->phys = "hpkbd/input0"; 263 264 hil_dev.dev->id.bustype = BUS_HIL; 265 hil_dev.dev->id.vendor = PCI_VENDOR_ID_HP; 266 hil_dev.dev->id.product = 0x0001; 267 hil_dev.dev->id.version = 0x0010; 268 269 err = input_register_device(hil_dev.dev); 270 if (err) { 271 printk(KERN_ERR "HIL: Can't register device\n"); 272 goto err2; 273 } 274 275 printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n", 276 hil_dev.dev->name, kbid, HILBASE, HIL_IRQ); 277 278 return 0; 279 280 err2: 281 hil_do(HIL_INTOFF, NULL, 0); 282 free_irq(HIL_IRQ, hil_dev.dev_id); 283 err1: 284 input_free_device(hil_dev.dev); 285 hil_dev.dev = NULL; 286 return err; 287 } 288 289 static void __devexit hil_keyb_exit(void) 290 { 291 if (HIL_IRQ) 292 free_irq(HIL_IRQ, hil_dev.dev_id); 293 294 /* Turn off interrupts */ 295 hil_do(HIL_INTOFF, NULL, 0); 296 297 input_unregister_device(hil_dev.dev); 298 hil_dev.dev = NULL; 299 } 300 301 #if defined(CONFIG_PARISC) 302 static int __devinit hil_probe_chip(struct parisc_device *dev) 303 { 304 /* Only allow one HIL keyboard */ 305 if (hil_dev.dev) 306 return -ENODEV; 307 308 if (!dev->irq) { 309 printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n", 310 (void *)dev->hpa.start); 311 return -ENODEV; 312 } 313 314 hil_base = dev->hpa.start; 315 hil_irq = dev->irq; 316 hil_dev.dev_id = dev; 317 318 printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq); 319 320 return hil_keyb_init(); 321 } 322 323 static int __devexit hil_remove_chip(struct parisc_device *dev) 324 { 325 hil_keyb_exit(); 326 327 return 0; 328 } 329 330 static struct parisc_device_id hil_tbl[] = { 331 { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 }, 332 { 0, } 333 }; 334 335 #if 0 336 /* Disabled to avoid conflicts with the HP SDC HIL drivers */ 337 MODULE_DEVICE_TABLE(parisc, hil_tbl); 338 #endif 339 340 static struct parisc_driver hil_driver = { 341 .name = "hil", 342 .id_table = hil_tbl, 343 .probe = hil_probe_chip, 344 .remove = __devexit_p(hil_remove_chip), 345 }; 346 347 static int __init hil_init(void) 348 { 349 return register_parisc_driver(&hil_driver); 350 } 351 352 static void __exit hil_exit(void) 353 { 354 unregister_parisc_driver(&hil_driver); 355 } 356 357 #else /* !CONFIG_PARISC */ 358 359 static int __init hil_init(void) 360 { 361 int error; 362 363 /* Only allow one HIL keyboard */ 364 if (hil_dev.dev) 365 return -EBUSY; 366 367 if (!MACH_IS_HP300) 368 return -ENODEV; 369 370 if (!hwreg_present((void *)(HILBASE + HIL_DATA))) { 371 printk(KERN_ERR "HIL: hardware register was not found\n"); 372 return -ENODEV; 373 } 374 375 if (!request_region(HILBASE + HIL_DATA, 2, "hil")) { 376 printk(KERN_ERR "HIL: IOPORT region already used\n"); 377 return -EIO; 378 } 379 380 error = hil_keyb_init(); 381 if (error) { 382 release_region(HILBASE + HIL_DATA, 2); 383 return error; 384 } 385 386 return 0; 387 } 388 389 static void __exit hil_exit(void) 390 { 391 hil_keyb_exit(); 392 release_region(HILBASE + HIL_DATA, 2); 393 } 394 395 #endif /* CONFIG_PARISC */ 396 397 module_init(hil_init); 398 module_exit(hil_exit); 399