1 /* 2 * linux/drivers/hil/hilkbd.c 3 * 4 * Copyright (C) 1998 Philip Blundell <philb@gnu.org> 5 * Copyright (C) 1999 Matthew Wilcox <willy@bofh.ai> 6 * Copyright (C) 1999-2003 Helge Deller <deller@gmx.de> 7 * 8 * Very basic HP Human Interface Loop (HIL) driver. 9 * This driver handles the keyboard on HP300 (m68k) and on some 10 * HP700 (parisc) series machines. 11 * 12 * 13 * This file is subject to the terms and conditions of the GNU General Public 14 * License version 2. See the file COPYING in the main directory of this 15 * archive for more details. 16 */ 17 18 #include <linux/pci_ids.h> 19 #include <linux/ioport.h> 20 #include <linux/module.h> 21 #include <linux/config.h> 22 #include <linux/errno.h> 23 #include <linux/input.h> 24 #include <linux/init.h> 25 #include <linux/interrupt.h> 26 #include <linux/hil.h> 27 #include <linux/spinlock.h> 28 29 30 MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller"); 31 MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)"); 32 MODULE_LICENSE("GPL v2"); 33 34 35 #if defined(CONFIG_PARISC) 36 37 #include <asm/io.h> 38 #include <asm/hardware.h> 39 #include <asm/parisc-device.h> 40 static unsigned long hil_base; /* HPA for the HIL device */ 41 static unsigned int hil_irq; 42 #define HILBASE hil_base /* HPPA (parisc) port address */ 43 #define HIL_DATA 0x800 44 #define HIL_CMD 0x801 45 #define HIL_IRQ hil_irq 46 #define hil_readb(p) gsc_readb(p) 47 #define hil_writeb(v,p) gsc_writeb((v),(p)) 48 49 #elif defined(CONFIG_HP300) 50 51 #define HILBASE 0xf0428000 /* HP300 (m86k) port address */ 52 #define HIL_DATA 0x1 53 #define HIL_CMD 0x3 54 #define HIL_IRQ 2 55 #define hil_readb(p) readb(p) 56 #define hil_writeb(v,p) writeb((v),(p)) 57 58 #else 59 #error "HIL is not supported on this platform" 60 #endif 61 62 63 64 /* HIL helper functions */ 65 66 #define hil_busy() (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY) 67 #define hil_data_available() (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY) 68 #define hil_status() (hil_readb(HILBASE + HIL_CMD)) 69 #define hil_command(x) do { hil_writeb((x), HILBASE + HIL_CMD); } while (0) 70 #define hil_read_data() (hil_readb(HILBASE + HIL_DATA)) 71 #define hil_write_data(x) do { hil_writeb((x), HILBASE + HIL_DATA); } while (0) 72 73 /* HIL constants */ 74 75 #define HIL_BUSY 0x02 76 #define HIL_DATA_RDY 0x01 77 78 #define HIL_SETARD 0xA0 /* set auto-repeat delay */ 79 #define HIL_SETARR 0xA2 /* set auto-repeat rate */ 80 #define HIL_SETTONE 0xA3 /* set tone generator */ 81 #define HIL_CNMT 0xB2 /* clear nmi */ 82 #define HIL_INTON 0x5C /* Turn on interrupts. */ 83 #define HIL_INTOFF 0x5D /* Turn off interrupts. */ 84 85 #define HIL_READKBDSADR 0xF9 86 #define HIL_WRITEKBDSADR 0xE9 87 88 static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] = 89 { HIL_KEYCODES_SET1 }; 90 91 /* HIL structure */ 92 static struct { 93 struct input_dev dev; 94 95 unsigned int curdev; 96 97 unsigned char s; 98 unsigned char c; 99 int valid; 100 101 unsigned char data[16]; 102 unsigned int ptr; 103 spinlock_t lock; 104 105 void *dev_id; /* native bus device */ 106 } hil_dev; 107 108 109 static void poll_finished(void) 110 { 111 int down; 112 int key; 113 unsigned char scode; 114 115 switch (hil_dev.data[0]) { 116 case 0x40: 117 down = (hil_dev.data[1] & 1) == 0; 118 scode = hil_dev.data[1] >> 1; 119 key = hphilkeyb_keycode[scode]; 120 input_report_key(&hil_dev.dev, key, down); 121 break; 122 } 123 hil_dev.curdev = 0; 124 } 125 126 static inline void handle_status(unsigned char s, unsigned char c) 127 { 128 if (c & 0x8) { 129 /* End of block */ 130 if (c & 0x10) 131 poll_finished(); 132 } else { 133 if (c & 0x10) { 134 if (hil_dev.curdev) 135 poll_finished(); /* just in case */ 136 hil_dev.curdev = c & 7; 137 hil_dev.ptr = 0; 138 } 139 } 140 } 141 142 static inline void handle_data(unsigned char s, unsigned char c) 143 { 144 if (hil_dev.curdev) { 145 hil_dev.data[hil_dev.ptr++] = c; 146 hil_dev.ptr &= 15; 147 } 148 } 149 150 151 /* 152 * Handle HIL interrupts. 153 */ 154 static irqreturn_t hil_interrupt(int irq, void *handle, struct pt_regs *regs) 155 { 156 unsigned char s, c; 157 158 s = hil_status(); 159 c = hil_read_data(); 160 161 switch (s >> 4) { 162 case 0x5: 163 handle_status(s, c); 164 break; 165 case 0x6: 166 handle_data(s, c); 167 break; 168 case 0x4: 169 hil_dev.s = s; 170 hil_dev.c = c; 171 mb(); 172 hil_dev.valid = 1; 173 break; 174 } 175 return IRQ_HANDLED; 176 } 177 178 /* 179 * Send a command to the HIL 180 */ 181 182 static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len) 183 { 184 unsigned long flags; 185 186 spin_lock_irqsave(&hil_dev.lock, flags); 187 while (hil_busy()) 188 /* wait */; 189 hil_command(cmd); 190 while (len--) { 191 while (hil_busy()) 192 /* wait */; 193 hil_write_data(*(data++)); 194 } 195 spin_unlock_irqrestore(&hil_dev.lock, flags); 196 } 197 198 199 /* 200 * Initialise HIL. 201 */ 202 203 static int __init 204 hil_keyb_init(void) 205 { 206 unsigned char c; 207 unsigned int i, kbid; 208 wait_queue_head_t hil_wait; 209 210 if (hil_dev.dev.id.bustype) { 211 return -ENODEV; /* already initialized */ 212 } 213 214 #if defined(CONFIG_HP300) 215 if (!hwreg_present((void *)(HILBASE + HIL_DATA))) 216 return -ENODEV; 217 218 request_region(HILBASE+HIL_DATA, 2, "hil"); 219 #endif 220 221 request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id); 222 223 /* Turn on interrupts */ 224 hil_do(HIL_INTON, NULL, 0); 225 226 /* Look for keyboards */ 227 hil_dev.valid = 0; /* clear any pending data */ 228 hil_do(HIL_READKBDSADR, NULL, 0); 229 230 init_waitqueue_head(&hil_wait); 231 wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3*HZ); 232 if (!hil_dev.valid) { 233 printk(KERN_WARNING "HIL: timed out, assuming no keyboard present.\n"); 234 } 235 236 c = hil_dev.c; 237 hil_dev.valid = 0; 238 if (c == 0) { 239 kbid = -1; 240 printk(KERN_WARNING "HIL: no keyboard present.\n"); 241 } else { 242 kbid = ffz(~c); 243 /* printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid); */ 244 } 245 246 /* set it to raw mode */ 247 c = 0; 248 hil_do(HIL_WRITEKBDSADR, &c, 1); 249 250 init_input_dev(&hil_dev.dev); 251 252 for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++) 253 if (hphilkeyb_keycode[i] != KEY_RESERVED) 254 set_bit(hphilkeyb_keycode[i], hil_dev.dev.keybit); 255 256 hil_dev.dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); 257 hil_dev.dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL); 258 hil_dev.dev.keycodemax = HIL_KEYCODES_SET1_TBLSIZE; 259 hil_dev.dev.keycodesize = sizeof(hphilkeyb_keycode[0]); 260 hil_dev.dev.keycode = hphilkeyb_keycode; 261 hil_dev.dev.name = "HIL keyboard"; 262 hil_dev.dev.phys = "hpkbd/input0"; 263 264 hil_dev.dev.id.bustype = BUS_HIL; 265 hil_dev.dev.id.vendor = PCI_VENDOR_ID_HP; 266 hil_dev.dev.id.product = 0x0001; 267 hil_dev.dev.id.version = 0x0010; 268 269 input_register_device(&hil_dev.dev); 270 printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n", 271 hil_dev.dev.name, kbid, HILBASE, HIL_IRQ); 272 273 return 0; 274 } 275 276 #if defined(CONFIG_PARISC) 277 static int __init 278 hil_init_chip(struct parisc_device *dev) 279 { 280 if (!dev->irq) { 281 printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start); 282 return -ENODEV; 283 } 284 285 hil_base = dev->hpa.start; 286 hil_irq = dev->irq; 287 hil_dev.dev_id = dev; 288 289 printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq); 290 291 return hil_keyb_init(); 292 } 293 294 static struct parisc_device_id hil_tbl[] = { 295 { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 }, 296 { 0, } 297 }; 298 299 MODULE_DEVICE_TABLE(parisc, hil_tbl); 300 301 static struct parisc_driver hil_driver = { 302 .name = "hil", 303 .id_table = hil_tbl, 304 .probe = hil_init_chip, 305 }; 306 #endif /* CONFIG_PARISC */ 307 308 309 310 311 312 static int __init hil_init(void) 313 { 314 #if defined(CONFIG_PARISC) 315 return register_parisc_driver(&hil_driver); 316 #else 317 return hil_keyb_init(); 318 #endif 319 } 320 321 322 static void __exit hil_exit(void) 323 { 324 if (HIL_IRQ) { 325 disable_irq(HIL_IRQ); 326 free_irq(HIL_IRQ, hil_dev.dev_id); 327 } 328 329 /* Turn off interrupts */ 330 hil_do(HIL_INTOFF, NULL, 0); 331 332 input_unregister_device(&hil_dev.dev); 333 334 #if defined(CONFIG_PARISC) 335 unregister_parisc_driver(&hil_driver); 336 #else 337 release_region(HILBASE+HIL_DATA, 2); 338 #endif 339 } 340 341 module_init(hil_init); 342 module_exit(hil_exit); 343 344