1 // SPDX-License-Identifier: GPL-2.0
2 // ChromeOS EC keyboard driver
3 //
4 // Copyright (C) 2012 Google, Inc.
5 //
6 // This driver uses the ChromeOS EC byte-level message-based protocol for
7 // communicating the keyboard state (which keys are pressed) from a keyboard EC
8 // to the AP over some bus (such as i2c, lpc, spi).  The EC does debouncing,
9 // but everything else (including deghosting) is done here.  The main
10 // motivation for this is to keep the EC firmware as simple as possible, since
11 // it cannot be easily upgraded and EC flash/IRAM space is relatively
12 // expensive.
13 
14 #include <linux/module.h>
15 #include <linux/bitops.h>
16 #include <linux/i2c.h>
17 #include <linux/input.h>
18 #include <linux/interrupt.h>
19 #include <linux/kernel.h>
20 #include <linux/notifier.h>
21 #include <linux/platform_device.h>
22 #include <linux/slab.h>
23 #include <linux/sysrq.h>
24 #include <linux/input/matrix_keypad.h>
25 #include <linux/platform_data/cros_ec_commands.h>
26 #include <linux/platform_data/cros_ec_proto.h>
27 
28 #include <asm/unaligned.h>
29 
30 /*
31  * @rows: Number of rows in the keypad
32  * @cols: Number of columns in the keypad
33  * @row_shift: log2 or number of rows, rounded up
34  * @keymap_data: Matrix keymap data used to convert to keyscan values
35  * @ghost_filter: true to enable the matrix key-ghosting filter
36  * @valid_keys: bitmap of existing keys for each matrix column
37  * @old_kb_state: bitmap of keys pressed last scan
38  * @dev: Device pointer
39  * @ec: Top level ChromeOS device to use to talk to EC
40  * @idev: The input device for the matrix keys.
41  * @bs_idev: The input device for non-matrix buttons and switches (or NULL).
42  * @notifier: interrupt event notifier for transport devices
43  */
44 struct cros_ec_keyb {
45 	unsigned int rows;
46 	unsigned int cols;
47 	int row_shift;
48 	const struct matrix_keymap_data *keymap_data;
49 	bool ghost_filter;
50 	uint8_t *valid_keys;
51 	uint8_t *old_kb_state;
52 
53 	struct device *dev;
54 	struct cros_ec_device *ec;
55 
56 	struct input_dev *idev;
57 	struct input_dev *bs_idev;
58 	struct notifier_block notifier;
59 };
60 
61 
62 /**
63  * cros_ec_bs_map - Struct mapping Linux keycodes to EC button/switch bitmap
64  * #defines
65  *
66  * @ev_type: The type of the input event to generate (e.g., EV_KEY).
67  * @code: A linux keycode
68  * @bit: A #define like EC_MKBP_POWER_BUTTON or EC_MKBP_LID_OPEN
69  * @inverted: If the #define and EV_SW have opposite meanings, this is true.
70  *            Only applicable to switches.
71  */
72 struct cros_ec_bs_map {
73 	unsigned int ev_type;
74 	unsigned int code;
75 	u8 bit;
76 	bool inverted;
77 };
78 
79 /* cros_ec_keyb_bs - Map EC button/switch #defines into kernel ones */
80 static const struct cros_ec_bs_map cros_ec_keyb_bs[] = {
81 	/* Buttons */
82 	{
83 		.ev_type	= EV_KEY,
84 		.code		= KEY_POWER,
85 		.bit		= EC_MKBP_POWER_BUTTON,
86 	},
87 	{
88 		.ev_type	= EV_KEY,
89 		.code		= KEY_VOLUMEUP,
90 		.bit		= EC_MKBP_VOL_UP,
91 	},
92 	{
93 		.ev_type	= EV_KEY,
94 		.code		= KEY_VOLUMEDOWN,
95 		.bit		= EC_MKBP_VOL_DOWN,
96 	},
97 
98 	/* Switches */
99 	{
100 		.ev_type	= EV_SW,
101 		.code		= SW_LID,
102 		.bit		= EC_MKBP_LID_OPEN,
103 		.inverted	= true,
104 	},
105 	{
106 		.ev_type	= EV_SW,
107 		.code		= SW_TABLET_MODE,
108 		.bit		= EC_MKBP_TABLET_MODE,
109 	},
110 };
111 
112 /*
113  * Returns true when there is at least one combination of pressed keys that
114  * results in ghosting.
115  */
116 static bool cros_ec_keyb_has_ghosting(struct cros_ec_keyb *ckdev, uint8_t *buf)
117 {
118 	int col1, col2, buf1, buf2;
119 	struct device *dev = ckdev->dev;
120 	uint8_t *valid_keys = ckdev->valid_keys;
121 
122 	/*
123 	 * Ghosting happens if for any pressed key X there are other keys
124 	 * pressed both in the same row and column of X as, for instance,
125 	 * in the following diagram:
126 	 *
127 	 * . . Y . g .
128 	 * . . . . . .
129 	 * . . . . . .
130 	 * . . X . Z .
131 	 *
132 	 * In this case only X, Y, and Z are pressed, but g appears to be
133 	 * pressed too (see Wikipedia).
134 	 */
135 	for (col1 = 0; col1 < ckdev->cols; col1++) {
136 		buf1 = buf[col1] & valid_keys[col1];
137 		for (col2 = col1 + 1; col2 < ckdev->cols; col2++) {
138 			buf2 = buf[col2] & valid_keys[col2];
139 			if (hweight8(buf1 & buf2) > 1) {
140 				dev_dbg(dev, "ghost found at: B[%02d]:0x%02x & B[%02d]:0x%02x",
141 					col1, buf1, col2, buf2);
142 				return true;
143 			}
144 		}
145 	}
146 
147 	return false;
148 }
149 
150 
151 /*
152  * Compares the new keyboard state to the old one and produces key
153  * press/release events accordingly.  The keyboard state is 13 bytes (one byte
154  * per column)
155  */
156 static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
157 			 uint8_t *kb_state, int len)
158 {
159 	struct input_dev *idev = ckdev->idev;
160 	int col, row;
161 	int new_state;
162 	int old_state;
163 
164 	if (ckdev->ghost_filter && cros_ec_keyb_has_ghosting(ckdev, kb_state)) {
165 		/*
166 		 * Simple-minded solution: ignore this state. The obvious
167 		 * improvement is to only ignore changes to keys involved in
168 		 * the ghosting, but process the other changes.
169 		 */
170 		dev_dbg(ckdev->dev, "ghosting found\n");
171 		return;
172 	}
173 
174 	for (col = 0; col < ckdev->cols; col++) {
175 		for (row = 0; row < ckdev->rows; row++) {
176 			int pos = MATRIX_SCAN_CODE(row, col, ckdev->row_shift);
177 			const unsigned short *keycodes = idev->keycode;
178 
179 			new_state = kb_state[col] & (1 << row);
180 			old_state = ckdev->old_kb_state[col] & (1 << row);
181 			if (new_state != old_state) {
182 				dev_dbg(ckdev->dev,
183 					"changed: [r%d c%d]: byte %02x\n",
184 					row, col, new_state);
185 
186 				input_report_key(idev, keycodes[pos],
187 						 new_state);
188 			}
189 		}
190 		ckdev->old_kb_state[col] = kb_state[col];
191 	}
192 	input_sync(ckdev->idev);
193 }
194 
195 /**
196  * cros_ec_keyb_report_bs - Report non-matrixed buttons or switches
197  *
198  * This takes a bitmap of buttons or switches from the EC and reports events,
199  * syncing at the end.
200  *
201  * @ckdev: The keyboard device.
202  * @ev_type: The input event type (e.g., EV_KEY).
203  * @mask: A bitmap of buttons from the EC.
204  */
205 static void cros_ec_keyb_report_bs(struct cros_ec_keyb *ckdev,
206 				   unsigned int ev_type, u32 mask)
207 
208 {
209 	struct input_dev *idev = ckdev->bs_idev;
210 	int i;
211 
212 	for (i = 0; i < ARRAY_SIZE(cros_ec_keyb_bs); i++) {
213 		const struct cros_ec_bs_map *map = &cros_ec_keyb_bs[i];
214 
215 		if (map->ev_type != ev_type)
216 			continue;
217 
218 		input_event(idev, ev_type, map->code,
219 			    !!(mask & BIT(map->bit)) ^ map->inverted);
220 	}
221 	input_sync(idev);
222 }
223 
224 static int cros_ec_keyb_work(struct notifier_block *nb,
225 			     unsigned long queued_during_suspend, void *_notify)
226 {
227 	struct cros_ec_keyb *ckdev = container_of(nb, struct cros_ec_keyb,
228 						  notifier);
229 	u32 val;
230 	unsigned int ev_type;
231 
232 	/*
233 	 * If not wake enabled, discard key state changes during
234 	 * suspend. Switches will be re-checked in
235 	 * cros_ec_keyb_resume() to be sure nothing is lost.
236 	 */
237 	if (queued_during_suspend && !device_may_wakeup(ckdev->dev))
238 		return NOTIFY_OK;
239 
240 	switch (ckdev->ec->event_data.event_type) {
241 	case EC_MKBP_EVENT_KEY_MATRIX:
242 		pm_wakeup_event(ckdev->dev, 0);
243 
244 		if (ckdev->ec->event_size != ckdev->cols) {
245 			dev_err(ckdev->dev,
246 				"Discarded incomplete key matrix event.\n");
247 			return NOTIFY_OK;
248 		}
249 
250 		cros_ec_keyb_process(ckdev,
251 				     ckdev->ec->event_data.data.key_matrix,
252 				     ckdev->ec->event_size);
253 		break;
254 
255 	case EC_MKBP_EVENT_SYSRQ:
256 		pm_wakeup_event(ckdev->dev, 0);
257 
258 		val = get_unaligned_le32(&ckdev->ec->event_data.data.sysrq);
259 		dev_dbg(ckdev->dev, "sysrq code from EC: %#x\n", val);
260 		handle_sysrq(val);
261 		break;
262 
263 	case EC_MKBP_EVENT_BUTTON:
264 	case EC_MKBP_EVENT_SWITCH:
265 		pm_wakeup_event(ckdev->dev, 0);
266 
267 		if (ckdev->ec->event_data.event_type == EC_MKBP_EVENT_BUTTON) {
268 			val = get_unaligned_le32(
269 					&ckdev->ec->event_data.data.buttons);
270 			ev_type = EV_KEY;
271 		} else {
272 			val = get_unaligned_le32(
273 					&ckdev->ec->event_data.data.switches);
274 			ev_type = EV_SW;
275 		}
276 		cros_ec_keyb_report_bs(ckdev, ev_type, val);
277 		break;
278 
279 	default:
280 		return NOTIFY_DONE;
281 	}
282 
283 	return NOTIFY_OK;
284 }
285 
286 /*
287  * Walks keycodes flipping bit in buffer COLUMNS deep where bit is ROW.  Used by
288  * ghosting logic to ignore NULL or virtual keys.
289  */
290 static void cros_ec_keyb_compute_valid_keys(struct cros_ec_keyb *ckdev)
291 {
292 	int row, col;
293 	int row_shift = ckdev->row_shift;
294 	unsigned short *keymap = ckdev->idev->keycode;
295 	unsigned short code;
296 
297 	BUG_ON(ckdev->idev->keycodesize != sizeof(*keymap));
298 
299 	for (col = 0; col < ckdev->cols; col++) {
300 		for (row = 0; row < ckdev->rows; row++) {
301 			code = keymap[MATRIX_SCAN_CODE(row, col, row_shift)];
302 			if (code && (code != KEY_BATTERY))
303 				ckdev->valid_keys[col] |= 1 << row;
304 		}
305 		dev_dbg(ckdev->dev, "valid_keys[%02d] = 0x%02x\n",
306 			col, ckdev->valid_keys[col]);
307 	}
308 }
309 
310 /**
311  * cros_ec_keyb_info - Wrap the EC command EC_CMD_MKBP_INFO
312  *
313  * This wraps the EC_CMD_MKBP_INFO, abstracting out all of the marshalling and
314  * unmarshalling and different version nonsense into something simple.
315  *
316  * @ec_dev: The EC device
317  * @info_type: Either EC_MKBP_INFO_SUPPORTED or EC_MKBP_INFO_CURRENT.
318  * @event_type: Either EC_MKBP_EVENT_BUTTON or EC_MKBP_EVENT_SWITCH.  Actually
319  *              in some cases this could be EC_MKBP_EVENT_KEY_MATRIX or
320  *              EC_MKBP_EVENT_HOST_EVENT too but we don't use in this driver.
321  * @result: Where we'll store the result; a union
322  * @result_size: The size of the result.  Expected to be the size of one of
323  *               the elements in the union.
324  *
325  * Returns 0 if no error or -error upon error.
326  */
327 static int cros_ec_keyb_info(struct cros_ec_device *ec_dev,
328 			     enum ec_mkbp_info_type info_type,
329 			     enum ec_mkbp_event event_type,
330 			     union ec_response_get_next_data *result,
331 			     size_t result_size)
332 {
333 	struct ec_params_mkbp_info *params;
334 	struct cros_ec_command *msg;
335 	int ret;
336 
337 	msg = kzalloc(sizeof(*msg) + max_t(size_t, result_size,
338 					   sizeof(*params)), GFP_KERNEL);
339 	if (!msg)
340 		return -ENOMEM;
341 
342 	msg->command = EC_CMD_MKBP_INFO;
343 	msg->version = 1;
344 	msg->outsize = sizeof(*params);
345 	msg->insize = result_size;
346 	params = (struct ec_params_mkbp_info *)msg->data;
347 	params->info_type = info_type;
348 	params->event_type = event_type;
349 
350 	ret = cros_ec_cmd_xfer(ec_dev, msg);
351 	if (ret < 0) {
352 		dev_warn(ec_dev->dev, "Transfer error %d/%d: %d\n",
353 			 (int)info_type, (int)event_type, ret);
354 	} else if (msg->result == EC_RES_INVALID_VERSION) {
355 		/* With older ECs we just return 0 for everything */
356 		memset(result, 0, result_size);
357 		ret = 0;
358 	} else if (msg->result != EC_RES_SUCCESS) {
359 		dev_warn(ec_dev->dev, "Error getting info %d/%d: %d\n",
360 			 (int)info_type, (int)event_type, msg->result);
361 		ret = -EPROTO;
362 	} else if (ret != result_size) {
363 		dev_warn(ec_dev->dev, "Wrong size %d/%d: %d != %zu\n",
364 			 (int)info_type, (int)event_type,
365 			 ret, result_size);
366 		ret = -EPROTO;
367 	} else {
368 		memcpy(result, msg->data, result_size);
369 		ret = 0;
370 	}
371 
372 	kfree(msg);
373 
374 	return ret;
375 }
376 
377 /**
378  * cros_ec_keyb_query_switches - Query the state of switches and report
379  *
380  * This will ask the EC about the current state of switches and report to the
381  * kernel.  Note that we don't query for buttons because they are more
382  * transitory and we'll get an update on the next release / press.
383  *
384  * @ckdev: The keyboard device
385  *
386  * Returns 0 if no error or -error upon error.
387  */
388 static int cros_ec_keyb_query_switches(struct cros_ec_keyb *ckdev)
389 {
390 	struct cros_ec_device *ec_dev = ckdev->ec;
391 	union ec_response_get_next_data event_data = {};
392 	int ret;
393 
394 	ret = cros_ec_keyb_info(ec_dev, EC_MKBP_INFO_CURRENT,
395 				EC_MKBP_EVENT_SWITCH, &event_data,
396 				sizeof(event_data.switches));
397 	if (ret)
398 		return ret;
399 
400 	cros_ec_keyb_report_bs(ckdev, EV_SW,
401 			       get_unaligned_le32(&event_data.switches));
402 
403 	return 0;
404 }
405 
406 /**
407  * cros_ec_keyb_resume - Resume the keyboard
408  *
409  * We use the resume notification as a chance to query the EC for switches.
410  *
411  * @dev: The keyboard device
412  *
413  * Returns 0 if no error or -error upon error.
414  */
415 static __maybe_unused int cros_ec_keyb_resume(struct device *dev)
416 {
417 	struct cros_ec_keyb *ckdev = dev_get_drvdata(dev);
418 
419 	if (ckdev->bs_idev)
420 		return cros_ec_keyb_query_switches(ckdev);
421 
422 	return 0;
423 }
424 
425 /**
426  * cros_ec_keyb_register_bs - Register non-matrix buttons/switches
427  *
428  * Handles all the bits of the keyboard driver related to non-matrix buttons
429  * and switches, including asking the EC about which are present and telling
430  * the kernel to expect them.
431  *
432  * If this device has no support for buttons and switches we'll return no error
433  * but the ckdev->bs_idev will remain NULL when this function exits.
434  *
435  * @ckdev: The keyboard device
436  *
437  * Returns 0 if no error or -error upon error.
438  */
439 static int cros_ec_keyb_register_bs(struct cros_ec_keyb *ckdev)
440 {
441 	struct cros_ec_device *ec_dev = ckdev->ec;
442 	struct device *dev = ckdev->dev;
443 	struct input_dev *idev;
444 	union ec_response_get_next_data event_data = {};
445 	const char *phys;
446 	u32 buttons;
447 	u32 switches;
448 	int ret;
449 	int i;
450 
451 	ret = cros_ec_keyb_info(ec_dev, EC_MKBP_INFO_SUPPORTED,
452 				EC_MKBP_EVENT_BUTTON, &event_data,
453 				sizeof(event_data.buttons));
454 	if (ret)
455 		return ret;
456 	buttons = get_unaligned_le32(&event_data.buttons);
457 
458 	ret = cros_ec_keyb_info(ec_dev, EC_MKBP_INFO_SUPPORTED,
459 				EC_MKBP_EVENT_SWITCH, &event_data,
460 				sizeof(event_data.switches));
461 	if (ret)
462 		return ret;
463 	switches = get_unaligned_le32(&event_data.switches);
464 
465 	if (!buttons && !switches)
466 		return 0;
467 
468 	/*
469 	 * We call the non-matrix buttons/switches 'input1', if present.
470 	 * Allocate phys before input dev, to ensure correct tear-down
471 	 * ordering.
472 	 */
473 	phys = devm_kasprintf(dev, GFP_KERNEL, "%s/input1", ec_dev->phys_name);
474 	if (!phys)
475 		return -ENOMEM;
476 
477 	idev = devm_input_allocate_device(dev);
478 	if (!idev)
479 		return -ENOMEM;
480 
481 	idev->name = "cros_ec_buttons";
482 	idev->phys = phys;
483 	__set_bit(EV_REP, idev->evbit);
484 
485 	idev->id.bustype = BUS_VIRTUAL;
486 	idev->id.version = 1;
487 	idev->id.product = 0;
488 	idev->dev.parent = dev;
489 
490 	input_set_drvdata(idev, ckdev);
491 	ckdev->bs_idev = idev;
492 
493 	for (i = 0; i < ARRAY_SIZE(cros_ec_keyb_bs); i++) {
494 		const struct cros_ec_bs_map *map = &cros_ec_keyb_bs[i];
495 
496 		if ((map->ev_type == EV_KEY && (buttons & BIT(map->bit))) ||
497 		    (map->ev_type == EV_SW && (switches & BIT(map->bit))))
498 			input_set_capability(idev, map->ev_type, map->code);
499 	}
500 
501 	ret = cros_ec_keyb_query_switches(ckdev);
502 	if (ret) {
503 		dev_err(dev, "cannot query switches\n");
504 		return ret;
505 	}
506 
507 	ret = input_register_device(ckdev->bs_idev);
508 	if (ret) {
509 		dev_err(dev, "cannot register input device\n");
510 		return ret;
511 	}
512 
513 	return 0;
514 }
515 
516 /**
517  * cros_ec_keyb_register_bs - Register matrix keys
518  *
519  * Handles all the bits of the keyboard driver related to matrix keys.
520  *
521  * @ckdev: The keyboard device
522  *
523  * Returns 0 if no error or -error upon error.
524  */
525 static int cros_ec_keyb_register_matrix(struct cros_ec_keyb *ckdev)
526 {
527 	struct cros_ec_device *ec_dev = ckdev->ec;
528 	struct device *dev = ckdev->dev;
529 	struct input_dev *idev;
530 	const char *phys;
531 	int err;
532 
533 	err = matrix_keypad_parse_properties(dev, &ckdev->rows, &ckdev->cols);
534 	if (err)
535 		return err;
536 
537 	ckdev->valid_keys = devm_kzalloc(dev, ckdev->cols, GFP_KERNEL);
538 	if (!ckdev->valid_keys)
539 		return -ENOMEM;
540 
541 	ckdev->old_kb_state = devm_kzalloc(dev, ckdev->cols, GFP_KERNEL);
542 	if (!ckdev->old_kb_state)
543 		return -ENOMEM;
544 
545 	/*
546 	 * We call the keyboard matrix 'input0'. Allocate phys before input
547 	 * dev, to ensure correct tear-down ordering.
548 	 */
549 	phys = devm_kasprintf(dev, GFP_KERNEL, "%s/input0", ec_dev->phys_name);
550 	if (!phys)
551 		return -ENOMEM;
552 
553 	idev = devm_input_allocate_device(dev);
554 	if (!idev)
555 		return -ENOMEM;
556 
557 	idev->name = CROS_EC_DEV_NAME;
558 	idev->phys = phys;
559 	__set_bit(EV_REP, idev->evbit);
560 
561 	idev->id.bustype = BUS_VIRTUAL;
562 	idev->id.version = 1;
563 	idev->id.product = 0;
564 	idev->dev.parent = dev;
565 
566 	ckdev->ghost_filter = of_property_read_bool(dev->of_node,
567 					"google,needs-ghost-filter");
568 
569 	err = matrix_keypad_build_keymap(NULL, NULL, ckdev->rows, ckdev->cols,
570 					 NULL, idev);
571 	if (err) {
572 		dev_err(dev, "cannot build key matrix\n");
573 		return err;
574 	}
575 
576 	ckdev->row_shift = get_count_order(ckdev->cols);
577 
578 	input_set_capability(idev, EV_MSC, MSC_SCAN);
579 	input_set_drvdata(idev, ckdev);
580 	ckdev->idev = idev;
581 	cros_ec_keyb_compute_valid_keys(ckdev);
582 
583 	err = input_register_device(ckdev->idev);
584 	if (err) {
585 		dev_err(dev, "cannot register input device\n");
586 		return err;
587 	}
588 
589 	return 0;
590 }
591 
592 static int cros_ec_keyb_probe(struct platform_device *pdev)
593 {
594 	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
595 	struct device *dev = &pdev->dev;
596 	struct cros_ec_keyb *ckdev;
597 	int err;
598 
599 	if (!dev->of_node)
600 		return -ENODEV;
601 
602 	ckdev = devm_kzalloc(dev, sizeof(*ckdev), GFP_KERNEL);
603 	if (!ckdev)
604 		return -ENOMEM;
605 
606 	ckdev->ec = ec;
607 	ckdev->dev = dev;
608 	dev_set_drvdata(dev, ckdev);
609 
610 	err = cros_ec_keyb_register_matrix(ckdev);
611 	if (err) {
612 		dev_err(dev, "cannot register matrix inputs: %d\n", err);
613 		return err;
614 	}
615 
616 	err = cros_ec_keyb_register_bs(ckdev);
617 	if (err) {
618 		dev_err(dev, "cannot register non-matrix inputs: %d\n", err);
619 		return err;
620 	}
621 
622 	ckdev->notifier.notifier_call = cros_ec_keyb_work;
623 	err = blocking_notifier_chain_register(&ckdev->ec->event_notifier,
624 					       &ckdev->notifier);
625 	if (err) {
626 		dev_err(dev, "cannot register notifier: %d\n", err);
627 		return err;
628 	}
629 
630 	device_init_wakeup(ckdev->dev, true);
631 	return 0;
632 }
633 
634 static int cros_ec_keyb_remove(struct platform_device *pdev)
635 {
636 	struct cros_ec_keyb *ckdev = dev_get_drvdata(&pdev->dev);
637 
638 	blocking_notifier_chain_unregister(&ckdev->ec->event_notifier,
639 					   &ckdev->notifier);
640 
641 	return 0;
642 }
643 
644 #ifdef CONFIG_OF
645 static const struct of_device_id cros_ec_keyb_of_match[] = {
646 	{ .compatible = "google,cros-ec-keyb" },
647 	{},
648 };
649 MODULE_DEVICE_TABLE(of, cros_ec_keyb_of_match);
650 #endif
651 
652 static SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume);
653 
654 static struct platform_driver cros_ec_keyb_driver = {
655 	.probe = cros_ec_keyb_probe,
656 	.remove = cros_ec_keyb_remove,
657 	.driver = {
658 		.name = "cros-ec-keyb",
659 		.of_match_table = of_match_ptr(cros_ec_keyb_of_match),
660 		.pm = &cros_ec_keyb_pm_ops,
661 	},
662 };
663 
664 module_platform_driver(cros_ec_keyb_driver);
665 
666 MODULE_LICENSE("GPL v2");
667 MODULE_DESCRIPTION("ChromeOS EC keyboard driver");
668 MODULE_ALIAS("platform:cros-ec-keyb");
669