1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * AT and PS/2 keyboard driver 4 * 5 * Copyright (c) 1999-2002 Vojtech Pavlik 6 */ 7 8 9 /* 10 * This driver can handle standard AT keyboards and PS/2 keyboards in 11 * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb 12 * input-only controllers and AT keyboards connected over a one way RS232 13 * converter. 14 */ 15 16 #include <linux/delay.h> 17 #include <linux/module.h> 18 #include <linux/slab.h> 19 #include <linux/interrupt.h> 20 #include <linux/init.h> 21 #include <linux/input.h> 22 #include <linux/input/vivaldi-fmap.h> 23 #include <linux/serio.h> 24 #include <linux/workqueue.h> 25 #include <linux/libps2.h> 26 #include <linux/mutex.h> 27 #include <linux/dmi.h> 28 #include <linux/property.h> 29 30 #define DRIVER_DESC "AT and PS/2 keyboard driver" 31 32 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>"); 33 MODULE_DESCRIPTION(DRIVER_DESC); 34 MODULE_LICENSE("GPL"); 35 36 static int atkbd_set = 2; 37 module_param_named(set, atkbd_set, int, 0); 38 MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)"); 39 40 #if defined(__i386__) || defined(__x86_64__) || defined(__hppa__) 41 static bool atkbd_reset; 42 #else 43 static bool atkbd_reset = true; 44 #endif 45 module_param_named(reset, atkbd_reset, bool, 0); 46 MODULE_PARM_DESC(reset, "Reset keyboard during initialization"); 47 48 static bool atkbd_softrepeat; 49 module_param_named(softrepeat, atkbd_softrepeat, bool, 0); 50 MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat"); 51 52 static bool atkbd_softraw = true; 53 module_param_named(softraw, atkbd_softraw, bool, 0); 54 MODULE_PARM_DESC(softraw, "Use software generated rawmode"); 55 56 static bool atkbd_scroll; 57 module_param_named(scroll, atkbd_scroll, bool, 0); 58 MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards"); 59 60 static bool atkbd_extra; 61 module_param_named(extra, atkbd_extra, bool, 0); 62 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); 63 64 static bool atkbd_terminal; 65 module_param_named(terminal, atkbd_terminal, bool, 0); 66 MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2"); 67 68 #define SCANCODE(keymap) ((keymap >> 16) & 0xFFFF) 69 #define KEYCODE(keymap) (keymap & 0xFFFF) 70 71 /* 72 * Scancode to keycode tables. These are just the default setting, and 73 * are loadable via a userland utility. 74 */ 75 76 #define ATKBD_KEYMAP_SIZE 512 77 78 static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = { 79 80 #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES 81 82 /* XXX: need a more general approach */ 83 84 #include "hpps2atkbd.h" /* include the keyboard scancodes */ 85 86 #else 87 0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41,117, 88 0, 56, 42, 93, 29, 16, 2, 0, 0, 0, 44, 31, 30, 17, 3, 0, 89 0, 46, 45, 32, 18, 5, 4, 95, 0, 57, 47, 33, 20, 19, 6,183, 90 0, 49, 48, 35, 34, 21, 7,184, 0, 0, 50, 36, 22, 8, 9,185, 91 0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0, 92 0, 89, 40, 0, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 85, 93 0, 86, 91, 90, 92, 0, 14, 94, 0, 79,124, 75, 71,121, 0, 0, 94 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99, 95 96 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 97 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, 98 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, 99 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, 100 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, 101 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, 102 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, 103 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0, 104 105 0, 0, 0, 65, 99, 106 #endif 107 }; 108 109 static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = { 110 111 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60, 112 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62, 113 134, 46, 45, 32, 18, 5, 4, 63,135, 57, 47, 33, 20, 19, 6, 64, 114 136, 49, 48, 35, 34, 21, 7, 65,137,100, 50, 36, 22, 8, 9, 66, 115 125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68, 116 113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70, 117 108,105,119,103,111,107, 14,110, 0, 79,106, 75, 71,109,102,104, 118 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183, 119 120 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0, 121 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168, 122 148,149,147,140 123 }; 124 125 static const unsigned short atkbd_unxlate_table[128] = { 126 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13, 127 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27, 128 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42, 129 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3, 130 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105, 131 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63, 132 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111, 133 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110 134 }; 135 136 #define ATKBD_CMD_SETLEDS 0x10ed 137 #define ATKBD_CMD_GSCANSET 0x11f0 138 #define ATKBD_CMD_SSCANSET 0x10f0 139 #define ATKBD_CMD_GETID 0x02f2 140 #define ATKBD_CMD_SETREP 0x10f3 141 #define ATKBD_CMD_ENABLE 0x00f4 142 #define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ 143 #define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ 144 #define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */ 145 #define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */ 146 #define ATKBD_CMD_RESET_BAT 0x02ff 147 #define ATKBD_CMD_RESEND 0x00fe 148 #define ATKBD_CMD_EX_ENABLE 0x10ea 149 #define ATKBD_CMD_EX_SETLEDS 0x20eb 150 #define ATKBD_CMD_OK_GETID 0x02e8 151 152 #define ATKBD_RET_ACK 0xfa 153 #define ATKBD_RET_NAK 0xfe 154 #define ATKBD_RET_BAT 0xaa 155 #define ATKBD_RET_EMUL0 0xe0 156 #define ATKBD_RET_EMUL1 0xe1 157 #define ATKBD_RET_RELEASE 0xf0 158 #define ATKBD_RET_HANJA 0xf1 159 #define ATKBD_RET_HANGEUL 0xf2 160 #define ATKBD_RET_ERR 0xff 161 162 #define ATKBD_KEY_UNKNOWN 0 163 #define ATKBD_KEY_NULL 255 164 165 #define ATKBD_SCR_1 0xfffe 166 #define ATKBD_SCR_2 0xfffd 167 #define ATKBD_SCR_4 0xfffc 168 #define ATKBD_SCR_8 0xfffb 169 #define ATKBD_SCR_CLICK 0xfffa 170 #define ATKBD_SCR_LEFT 0xfff9 171 #define ATKBD_SCR_RIGHT 0xfff8 172 173 #define ATKBD_SPECIAL ATKBD_SCR_RIGHT 174 175 #define ATKBD_LED_EVENT_BIT 0 176 #define ATKBD_REP_EVENT_BIT 1 177 178 #define ATKBD_XL_ERR 0x01 179 #define ATKBD_XL_BAT 0x02 180 #define ATKBD_XL_ACK 0x04 181 #define ATKBD_XL_NAK 0x08 182 #define ATKBD_XL_HANGEUL 0x10 183 #define ATKBD_XL_HANJA 0x20 184 185 static const struct { 186 unsigned short keycode; 187 unsigned char set2; 188 } atkbd_scroll_keys[] = { 189 { ATKBD_SCR_1, 0xc5 }, 190 { ATKBD_SCR_2, 0x9d }, 191 { ATKBD_SCR_4, 0xa4 }, 192 { ATKBD_SCR_8, 0x9b }, 193 { ATKBD_SCR_CLICK, 0xe0 }, 194 { ATKBD_SCR_LEFT, 0xcb }, 195 { ATKBD_SCR_RIGHT, 0xd2 }, 196 }; 197 198 /* 199 * The atkbd control structure 200 */ 201 202 struct atkbd { 203 204 struct ps2dev ps2dev; 205 struct input_dev *dev; 206 207 /* Written only during init */ 208 char name[64]; 209 char phys[32]; 210 211 unsigned short id; 212 unsigned short keycode[ATKBD_KEYMAP_SIZE]; 213 DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE); 214 unsigned char set; 215 bool translated; 216 bool extra; 217 bool write; 218 bool softrepeat; 219 bool softraw; 220 bool scroll; 221 bool enabled; 222 223 /* Accessed only from interrupt */ 224 unsigned char emul; 225 bool resend; 226 bool release; 227 unsigned long xl_bit; 228 unsigned int last; 229 unsigned long time; 230 unsigned long err_count; 231 232 struct delayed_work event_work; 233 unsigned long event_jiffies; 234 unsigned long event_mask; 235 236 /* Serializes reconnect(), attr->set() and event work */ 237 struct mutex mutex; 238 239 struct vivaldi_data vdata; 240 }; 241 242 /* 243 * System-specific keymap fixup routine 244 */ 245 static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); 246 static void *atkbd_platform_fixup_data; 247 static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); 248 249 /* 250 * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding 251 * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed. 252 */ 253 static bool atkbd_skip_deactivate; 254 255 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, 256 ssize_t (*handler)(struct atkbd *, char *)); 257 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, 258 ssize_t (*handler)(struct atkbd *, const char *, size_t)); 259 #define ATKBD_DEFINE_ATTR(_name) \ 260 static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ 261 static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t); \ 262 static ssize_t atkbd_do_show_##_name(struct device *d, \ 263 struct device_attribute *attr, char *b) \ 264 { \ 265 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ 266 } \ 267 static ssize_t atkbd_do_set_##_name(struct device *d, \ 268 struct device_attribute *attr, const char *b, size_t s) \ 269 { \ 270 return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \ 271 } \ 272 static struct device_attribute atkbd_attr_##_name = \ 273 __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name); 274 275 ATKBD_DEFINE_ATTR(extra); 276 ATKBD_DEFINE_ATTR(force_release); 277 ATKBD_DEFINE_ATTR(scroll); 278 ATKBD_DEFINE_ATTR(set); 279 ATKBD_DEFINE_ATTR(softrepeat); 280 ATKBD_DEFINE_ATTR(softraw); 281 282 #define ATKBD_DEFINE_RO_ATTR(_name) \ 283 static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ 284 static ssize_t atkbd_do_show_##_name(struct device *d, \ 285 struct device_attribute *attr, char *b) \ 286 { \ 287 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ 288 } \ 289 static struct device_attribute atkbd_attr_##_name = \ 290 __ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL); 291 292 ATKBD_DEFINE_RO_ATTR(err_count); 293 ATKBD_DEFINE_RO_ATTR(function_row_physmap); 294 295 static struct attribute *atkbd_attributes[] = { 296 &atkbd_attr_extra.attr, 297 &atkbd_attr_force_release.attr, 298 &atkbd_attr_scroll.attr, 299 &atkbd_attr_set.attr, 300 &atkbd_attr_softrepeat.attr, 301 &atkbd_attr_softraw.attr, 302 &atkbd_attr_err_count.attr, 303 &atkbd_attr_function_row_physmap.attr, 304 NULL 305 }; 306 307 static ssize_t atkbd_show_function_row_physmap(struct atkbd *atkbd, char *buf) 308 { 309 return vivaldi_function_row_physmap_show(&atkbd->vdata, buf); 310 } 311 312 static struct atkbd *atkbd_from_serio(struct serio *serio) 313 { 314 struct ps2dev *ps2dev = serio_get_drvdata(serio); 315 316 return container_of(ps2dev, struct atkbd, ps2dev); 317 } 318 319 static umode_t atkbd_attr_is_visible(struct kobject *kobj, 320 struct attribute *attr, int i) 321 { 322 struct device *dev = kobj_to_dev(kobj); 323 struct serio *serio = to_serio_port(dev); 324 struct atkbd *atkbd = atkbd_from_serio(serio); 325 326 if (attr == &atkbd_attr_function_row_physmap.attr && 327 !atkbd->vdata.num_function_row_keys) 328 return 0; 329 330 return attr->mode; 331 } 332 333 static const struct attribute_group atkbd_attribute_group = { 334 .attrs = atkbd_attributes, 335 .is_visible = atkbd_attr_is_visible, 336 }; 337 338 __ATTRIBUTE_GROUPS(atkbd_attribute); 339 340 static const unsigned int xl_table[] = { 341 ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK, 342 ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL, 343 }; 344 345 /* 346 * Checks if we should mangle the scancode to extract 'release' bit 347 * in translated mode. 348 */ 349 static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code) 350 { 351 int i; 352 353 if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1) 354 return false; 355 356 for (i = 0; i < ARRAY_SIZE(xl_table); i++) 357 if (code == xl_table[i]) 358 return test_bit(i, &xl_bit); 359 360 return true; 361 } 362 363 /* 364 * Calculates new value of xl_bit so the driver can distinguish 365 * between make/break pair of scancodes for select keys and PS/2 366 * protocol responses. 367 */ 368 static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code) 369 { 370 int i; 371 372 for (i = 0; i < ARRAY_SIZE(xl_table); i++) { 373 if (!((code ^ xl_table[i]) & 0x7f)) { 374 if (code & 0x80) 375 __clear_bit(i, &atkbd->xl_bit); 376 else 377 __set_bit(i, &atkbd->xl_bit); 378 break; 379 } 380 } 381 } 382 383 /* 384 * Encode the scancode, 0xe0 prefix, and high bit into a single integer, 385 * keeping kernel 2.4 compatibility for set 2 386 */ 387 static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code) 388 { 389 if (atkbd->set == 3) { 390 if (atkbd->emul == 1) 391 code |= 0x100; 392 } else { 393 code = (code & 0x7f) | ((code & 0x80) << 1); 394 if (atkbd->emul == 1) 395 code |= 0x80; 396 } 397 398 return code; 399 } 400 401 /* 402 * Tries to handle frame or parity error by requesting the keyboard controller 403 * to resend the last byte. This historically not done on x86 as controllers 404 * there typically do not implement this command. 405 */ 406 static bool __maybe_unused atkbd_handle_frame_error(struct ps2dev *ps2dev, 407 u8 data, unsigned int flags) 408 { 409 struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev); 410 struct serio *serio = ps2dev->serio; 411 412 if ((flags & (SERIO_FRAME | SERIO_PARITY)) && 413 (~flags & SERIO_TIMEOUT) && 414 !atkbd->resend && atkbd->write) { 415 dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags); 416 serio_write(serio, ATKBD_CMD_RESEND); 417 atkbd->resend = true; 418 return true; 419 } 420 421 if (!flags && data == ATKBD_RET_ACK) 422 atkbd->resend = false; 423 424 return false; 425 } 426 427 static enum ps2_disposition atkbd_pre_receive_byte(struct ps2dev *ps2dev, 428 u8 data, unsigned int flags) 429 { 430 struct serio *serio = ps2dev->serio; 431 432 dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags); 433 434 #if !defined(__i386__) && !defined (__x86_64__) 435 if (atkbd_handle_frame_error(ps2dev, data, flags)) 436 return PS2_IGNORE; 437 #endif 438 439 return PS2_PROCESS; 440 } 441 442 static void atkbd_receive_byte(struct ps2dev *ps2dev, u8 data) 443 { 444 struct serio *serio = ps2dev->serio; 445 struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev); 446 struct input_dev *dev = atkbd->dev; 447 unsigned int code = data; 448 int scroll = 0, hscroll = 0, click = -1; 449 int value; 450 unsigned short keycode; 451 452 pm_wakeup_event(&serio->dev, 0); 453 454 if (!atkbd->enabled) 455 return; 456 457 input_event(dev, EV_MSC, MSC_RAW, code); 458 459 if (atkbd_platform_scancode_fixup) 460 code = atkbd_platform_scancode_fixup(atkbd, code); 461 462 if (atkbd->translated) { 463 464 if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) { 465 atkbd->release = code >> 7; 466 code &= 0x7f; 467 } 468 469 if (!atkbd->emul) 470 atkbd_calculate_xl_bit(atkbd, data); 471 } 472 473 switch (code) { 474 case ATKBD_RET_BAT: 475 atkbd->enabled = false; 476 serio_reconnect(atkbd->ps2dev.serio); 477 return; 478 case ATKBD_RET_EMUL0: 479 atkbd->emul = 1; 480 return; 481 case ATKBD_RET_EMUL1: 482 atkbd->emul = 2; 483 return; 484 case ATKBD_RET_RELEASE: 485 atkbd->release = true; 486 return; 487 case ATKBD_RET_ACK: 488 case ATKBD_RET_NAK: 489 if (printk_ratelimit()) 490 dev_warn(&serio->dev, 491 "Spurious %s on %s. " 492 "Some program might be trying to access hardware directly.\n", 493 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); 494 return; 495 case ATKBD_RET_ERR: 496 atkbd->err_count++; 497 dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n", 498 serio->phys); 499 return; 500 } 501 502 code = atkbd_compat_scancode(atkbd, code); 503 504 if (atkbd->emul && --atkbd->emul) 505 return; 506 507 keycode = atkbd->keycode[code]; 508 509 if (!(atkbd->release && test_bit(code, atkbd->force_release_mask))) 510 if (keycode != ATKBD_KEY_NULL) 511 input_event(dev, EV_MSC, MSC_SCAN, code); 512 513 switch (keycode) { 514 case ATKBD_KEY_NULL: 515 break; 516 case ATKBD_KEY_UNKNOWN: 517 dev_warn(&serio->dev, 518 "Unknown key %s (%s set %d, code %#x on %s).\n", 519 atkbd->release ? "released" : "pressed", 520 atkbd->translated ? "translated" : "raw", 521 atkbd->set, code, serio->phys); 522 dev_warn(&serio->dev, 523 "Use 'setkeycodes %s%02x <keycode>' to make it known.\n", 524 code & 0x80 ? "e0" : "", code & 0x7f); 525 input_sync(dev); 526 break; 527 case ATKBD_SCR_1: 528 scroll = 1; 529 break; 530 case ATKBD_SCR_2: 531 scroll = 2; 532 break; 533 case ATKBD_SCR_4: 534 scroll = 4; 535 break; 536 case ATKBD_SCR_8: 537 scroll = 8; 538 break; 539 case ATKBD_SCR_CLICK: 540 click = !atkbd->release; 541 break; 542 case ATKBD_SCR_LEFT: 543 hscroll = -1; 544 break; 545 case ATKBD_SCR_RIGHT: 546 hscroll = 1; 547 break; 548 default: 549 if (atkbd->release) { 550 value = 0; 551 atkbd->last = 0; 552 } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) { 553 /* Workaround Toshiba laptop multiple keypress */ 554 value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2; 555 } else { 556 value = 1; 557 atkbd->last = code; 558 atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2; 559 } 560 561 input_event(dev, EV_KEY, keycode, value); 562 input_sync(dev); 563 564 if (value && test_bit(code, atkbd->force_release_mask)) { 565 input_event(dev, EV_MSC, MSC_SCAN, code); 566 input_report_key(dev, keycode, 0); 567 input_sync(dev); 568 } 569 } 570 571 if (atkbd->scroll) { 572 if (click != -1) 573 input_report_key(dev, BTN_MIDDLE, click); 574 input_report_rel(dev, REL_WHEEL, 575 atkbd->release ? -scroll : scroll); 576 input_report_rel(dev, REL_HWHEEL, hscroll); 577 input_sync(dev); 578 } 579 580 atkbd->release = false; 581 } 582 583 static int atkbd_set_repeat_rate(struct atkbd *atkbd) 584 { 585 const short period[32] = 586 { 33, 37, 42, 46, 50, 54, 58, 63, 67, 75, 83, 92, 100, 109, 116, 125, 587 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 }; 588 const short delay[4] = 589 { 250, 500, 750, 1000 }; 590 591 struct input_dev *dev = atkbd->dev; 592 unsigned char param; 593 int i = 0, j = 0; 594 595 while (i < ARRAY_SIZE(period) - 1 && period[i] < dev->rep[REP_PERIOD]) 596 i++; 597 dev->rep[REP_PERIOD] = period[i]; 598 599 while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY]) 600 j++; 601 dev->rep[REP_DELAY] = delay[j]; 602 603 param = i | (j << 5); 604 return ps2_command(&atkbd->ps2dev, ¶m, ATKBD_CMD_SETREP); 605 } 606 607 static int atkbd_set_leds(struct atkbd *atkbd) 608 { 609 struct input_dev *dev = atkbd->dev; 610 unsigned char param[2]; 611 612 param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0) 613 | (test_bit(LED_NUML, dev->led) ? 2 : 0) 614 | (test_bit(LED_CAPSL, dev->led) ? 4 : 0); 615 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS)) 616 return -1; 617 618 if (atkbd->extra) { 619 param[0] = 0; 620 param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0) 621 | (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0) 622 | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0) 623 | (test_bit(LED_MISC, dev->led) ? 0x10 : 0) 624 | (test_bit(LED_MUTE, dev->led) ? 0x20 : 0); 625 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS)) 626 return -1; 627 } 628 629 return 0; 630 } 631 632 /* 633 * atkbd_event_work() is used to complete processing of events that 634 * can not be processed by input_event() which is often called from 635 * interrupt context. 636 */ 637 638 static void atkbd_event_work(struct work_struct *work) 639 { 640 struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work); 641 642 mutex_lock(&atkbd->mutex); 643 644 if (!atkbd->enabled) { 645 /* 646 * Serio ports are resumed asynchronously so while driver core 647 * thinks that device is already fully operational in reality 648 * it may not be ready yet. In this case we need to keep 649 * rescheduling till reconnect completes. 650 */ 651 schedule_delayed_work(&atkbd->event_work, 652 msecs_to_jiffies(100)); 653 } else { 654 if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask)) 655 atkbd_set_leds(atkbd); 656 657 if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask)) 658 atkbd_set_repeat_rate(atkbd); 659 } 660 661 mutex_unlock(&atkbd->mutex); 662 } 663 664 /* 665 * Schedule switch for execution. We need to throttle requests, 666 * otherwise keyboard may become unresponsive. 667 */ 668 static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit) 669 { 670 unsigned long delay = msecs_to_jiffies(50); 671 672 if (time_after(jiffies, atkbd->event_jiffies + delay)) 673 delay = 0; 674 675 atkbd->event_jiffies = jiffies; 676 set_bit(event_bit, &atkbd->event_mask); 677 mb(); 678 schedule_delayed_work(&atkbd->event_work, delay); 679 } 680 681 /* 682 * Event callback from the input module. Events that change the state of 683 * the hardware are processed here. If action can not be performed in 684 * interrupt context it is offloaded to atkbd_event_work. 685 */ 686 687 static int atkbd_event(struct input_dev *dev, 688 unsigned int type, unsigned int code, int value) 689 { 690 struct atkbd *atkbd = input_get_drvdata(dev); 691 692 if (!atkbd->write) 693 return -1; 694 695 switch (type) { 696 697 case EV_LED: 698 atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT); 699 return 0; 700 701 case EV_REP: 702 if (!atkbd->softrepeat) 703 atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT); 704 return 0; 705 706 default: 707 return -1; 708 } 709 } 710 711 /* 712 * atkbd_enable() signals that interrupt handler is allowed to 713 * generate input events. 714 */ 715 716 static inline void atkbd_enable(struct atkbd *atkbd) 717 { 718 serio_pause_rx(atkbd->ps2dev.serio); 719 atkbd->enabled = true; 720 serio_continue_rx(atkbd->ps2dev.serio); 721 } 722 723 /* 724 * atkbd_disable() tells input handler that all incoming data except 725 * for ACKs and command response should be dropped. 726 */ 727 728 static inline void atkbd_disable(struct atkbd *atkbd) 729 { 730 serio_pause_rx(atkbd->ps2dev.serio); 731 atkbd->enabled = false; 732 serio_continue_rx(atkbd->ps2dev.serio); 733 } 734 735 static int atkbd_activate(struct atkbd *atkbd) 736 { 737 struct ps2dev *ps2dev = &atkbd->ps2dev; 738 739 /* 740 * Enable the keyboard to receive keystrokes. 741 */ 742 743 if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) { 744 dev_err(&ps2dev->serio->dev, 745 "Failed to enable keyboard on %s\n", 746 ps2dev->serio->phys); 747 return -1; 748 } 749 750 return 0; 751 } 752 753 /* 754 * atkbd_deactivate() resets and disables the keyboard from sending 755 * keystrokes. 756 */ 757 758 static void atkbd_deactivate(struct atkbd *atkbd) 759 { 760 struct ps2dev *ps2dev = &atkbd->ps2dev; 761 762 if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS)) 763 dev_err(&ps2dev->serio->dev, 764 "Failed to deactivate keyboard on %s\n", 765 ps2dev->serio->phys); 766 } 767 768 #ifdef CONFIG_X86 769 static bool atkbd_is_portable_device(void) 770 { 771 static const char * const chassis_types[] = { 772 "8", /* Portable */ 773 "9", /* Laptop */ 774 "10", /* Notebook */ 775 "14", /* Sub-Notebook */ 776 "31", /* Convertible */ 777 "32", /* Detachable */ 778 }; 779 int i; 780 781 for (i = 0; i < ARRAY_SIZE(chassis_types); i++) 782 if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i])) 783 return true; 784 785 return false; 786 } 787 788 /* 789 * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops 790 * the controller is always in translated mode. In this mode mice/touchpads will 791 * not work. So in this case simply assume a keyboard is connected to avoid 792 * confusing some laptop keyboards. 793 * 794 * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard 795 * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id 796 * and in translated mode that is a no-op. 797 */ 798 static bool atkbd_skip_getid(struct atkbd *atkbd) 799 { 800 return atkbd->translated && atkbd_is_portable_device(); 801 } 802 #else 803 static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; } 804 #endif 805 806 /* 807 * atkbd_probe() probes for an AT keyboard on a serio port. 808 */ 809 810 static int atkbd_probe(struct atkbd *atkbd) 811 { 812 struct ps2dev *ps2dev = &atkbd->ps2dev; 813 unsigned char param[2]; 814 815 /* 816 * Some systems, where the bit-twiddling when testing the io-lines of the 817 * controller may confuse the keyboard need a full reset of the keyboard. On 818 * these systems the BIOS also usually doesn't do it for us. 819 */ 820 821 if (atkbd_reset) 822 if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT)) 823 dev_warn(&ps2dev->serio->dev, 824 "keyboard reset failed on %s\n", 825 ps2dev->serio->phys); 826 827 if (atkbd_skip_getid(atkbd)) { 828 atkbd->id = 0xab83; 829 return 0; 830 } 831 832 /* 833 * Then we check the keyboard ID. We should get 0xab83 under normal conditions. 834 * Some keyboards report different values, but the first byte is always 0xab or 835 * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this 836 * should make sure we don't try to set the LEDs on it. 837 */ 838 839 param[0] = param[1] = 0xa5; /* initialize with invalid values */ 840 if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { 841 842 /* 843 * If the get ID command failed, we check if we can at least set 844 * the LEDs on the keyboard. This should work on every keyboard out there. 845 * It also turns the LEDs off, which we want anyway. 846 */ 847 param[0] = 0; 848 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) 849 return -1; 850 atkbd->id = 0xabba; 851 return 0; 852 } 853 854 if (!ps2_is_keyboard_id(param[0])) 855 return -1; 856 857 atkbd->id = (param[0] << 8) | param[1]; 858 859 if (atkbd->id == 0xaca1 && atkbd->translated) { 860 dev_err(&ps2dev->serio->dev, 861 "NCD terminal keyboards are only supported on non-translating controllers. " 862 "Use i8042.direct=1 to disable translation.\n"); 863 return -1; 864 } 865 866 /* 867 * Make sure nothing is coming from the keyboard and disturbs our 868 * internal state. 869 */ 870 if (!atkbd_skip_deactivate) 871 atkbd_deactivate(atkbd); 872 873 return 0; 874 } 875 876 /* 877 * atkbd_select_set checks if a keyboard has a working Set 3 support, and 878 * sets it into that. Unfortunately there are keyboards that can be switched 879 * to Set 3, but don't work well in that (BTC Multimedia ...) 880 */ 881 882 static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra) 883 { 884 struct ps2dev *ps2dev = &atkbd->ps2dev; 885 unsigned char param[2]; 886 887 atkbd->extra = false; 888 /* 889 * For known special keyboards we can go ahead and set the correct set. 890 * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and 891 * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards. 892 */ 893 894 if (atkbd->translated) 895 return 2; 896 897 if (atkbd->id == 0xaca1) { 898 param[0] = 3; 899 ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET); 900 return 3; 901 } 902 903 if (allow_extra) { 904 param[0] = 0x71; 905 if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) { 906 atkbd->extra = true; 907 return 2; 908 } 909 } 910 911 if (atkbd_terminal) { 912 ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB); 913 return 3; 914 } 915 916 if (target_set != 3) 917 return 2; 918 919 if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) { 920 atkbd->id = param[0] << 8 | param[1]; 921 return 2; 922 } 923 924 param[0] = 3; 925 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) 926 return 2; 927 928 param[0] = 0; 929 if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET)) 930 return 2; 931 932 if (param[0] != 3) { 933 param[0] = 2; 934 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) 935 return 2; 936 } 937 938 ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR); 939 940 return 3; 941 } 942 943 static int atkbd_reset_state(struct atkbd *atkbd) 944 { 945 struct ps2dev *ps2dev = &atkbd->ps2dev; 946 unsigned char param[1]; 947 948 /* 949 * Set the LEDs to a predefined state (all off). 950 */ 951 952 param[0] = 0; 953 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) 954 return -1; 955 956 /* 957 * Set autorepeat to fastest possible. 958 */ 959 960 param[0] = 0; 961 if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP)) 962 return -1; 963 964 return 0; 965 } 966 967 /* 968 * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a 969 * reboot. 970 */ 971 972 static void atkbd_cleanup(struct serio *serio) 973 { 974 struct atkbd *atkbd = atkbd_from_serio(serio); 975 976 atkbd_disable(atkbd); 977 ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF); 978 } 979 980 981 /* 982 * atkbd_disconnect() closes and frees. 983 */ 984 985 static void atkbd_disconnect(struct serio *serio) 986 { 987 struct atkbd *atkbd = atkbd_from_serio(serio); 988 989 atkbd_disable(atkbd); 990 991 input_unregister_device(atkbd->dev); 992 993 /* 994 * Make sure we don't have a command in flight. 995 * Note that since atkbd->enabled is false event work will keep 996 * rescheduling itself until it gets canceled and will not try 997 * accessing freed input device or serio port. 998 */ 999 cancel_delayed_work_sync(&atkbd->event_work); 1000 1001 serio_close(serio); 1002 serio_set_drvdata(serio, NULL); 1003 kfree(atkbd); 1004 } 1005 1006 /* 1007 * generate release events for the keycodes given in data 1008 */ 1009 static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd, 1010 const void *data) 1011 { 1012 const unsigned int *keys = data; 1013 unsigned int i; 1014 1015 if (atkbd->set == 2) 1016 for (i = 0; keys[i] != -1U; i++) 1017 __set_bit(keys[i], atkbd->force_release_mask); 1018 } 1019 1020 /* 1021 * Most special keys (Fn+F?) on Dell laptops do not generate release 1022 * events so we have to do it ourselves. 1023 */ 1024 static unsigned int atkbd_dell_laptop_forced_release_keys[] = { 1025 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U 1026 }; 1027 1028 /* 1029 * Perform fixup for HP system that doesn't generate release 1030 * for its video switch 1031 */ 1032 static unsigned int atkbd_hp_forced_release_keys[] = { 1033 0x94, -1U 1034 }; 1035 1036 /* 1037 * Samsung NC10,NC20 with Fn+F? key release not working 1038 */ 1039 static unsigned int atkbd_samsung_forced_release_keys[] = { 1040 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U 1041 }; 1042 1043 /* 1044 * Amilo Pi 3525 key release for Fn+Volume keys not working 1045 */ 1046 static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = { 1047 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U 1048 }; 1049 1050 /* 1051 * Amilo Xi 3650 key release for light touch bar not working 1052 */ 1053 static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { 1054 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U 1055 }; 1056 1057 /* 1058 * Soltech TA12 system with broken key release on volume keys and mute key 1059 */ 1060 static unsigned int atkdb_soltech_ta12_forced_release_keys[] = { 1061 0xa0, 0xae, 0xb0, -1U 1062 }; 1063 1064 /* 1065 * Many notebooks don't send key release event for volume up/down 1066 * keys, with key list below common among them 1067 */ 1068 static unsigned int atkbd_volume_forced_release_keys[] = { 1069 0xae, 0xb0, -1U 1070 }; 1071 1072 /* 1073 * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas 1074 * they should be generating e4-e6 (0x80 | code). 1075 */ 1076 static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd, 1077 unsigned int code) 1078 { 1079 if (atkbd->translated && atkbd->emul == 1 && 1080 (code == 0x64 || code == 0x65 || code == 0x66)) { 1081 atkbd->emul = 0; 1082 code |= 0x80; 1083 } 1084 1085 return code; 1086 } 1087 1088 static int atkbd_get_keymap_from_fwnode(struct atkbd *atkbd) 1089 { 1090 struct device *dev = &atkbd->ps2dev.serio->dev; 1091 int i, n; 1092 u32 *ptr; 1093 u16 scancode, keycode; 1094 1095 /* Parse "linux,keymap" property */ 1096 n = device_property_count_u32(dev, "linux,keymap"); 1097 if (n <= 0 || n > ATKBD_KEYMAP_SIZE) 1098 return -ENXIO; 1099 1100 ptr = kcalloc(n, sizeof(u32), GFP_KERNEL); 1101 if (!ptr) 1102 return -ENOMEM; 1103 1104 if (device_property_read_u32_array(dev, "linux,keymap", ptr, n)) { 1105 dev_err(dev, "problem parsing FW keymap property\n"); 1106 kfree(ptr); 1107 return -EINVAL; 1108 } 1109 1110 memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); 1111 for (i = 0; i < n; i++) { 1112 scancode = SCANCODE(ptr[i]); 1113 keycode = KEYCODE(ptr[i]); 1114 atkbd->keycode[scancode] = keycode; 1115 } 1116 1117 kfree(ptr); 1118 return 0; 1119 } 1120 1121 /* 1122 * atkbd_set_keycode_table() initializes keyboard's keycode table 1123 * according to the selected scancode set 1124 */ 1125 1126 static void atkbd_set_keycode_table(struct atkbd *atkbd) 1127 { 1128 struct device *dev = &atkbd->ps2dev.serio->dev; 1129 unsigned int scancode; 1130 int i, j; 1131 1132 memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); 1133 bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE); 1134 1135 if (!atkbd_get_keymap_from_fwnode(atkbd)) { 1136 dev_dbg(dev, "Using FW keymap\n"); 1137 } else if (atkbd->translated) { 1138 for (i = 0; i < 128; i++) { 1139 scancode = atkbd_unxlate_table[i]; 1140 atkbd->keycode[i] = atkbd_set2_keycode[scancode]; 1141 atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80]; 1142 if (atkbd->scroll) 1143 for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++) 1144 if ((scancode | 0x80) == atkbd_scroll_keys[j].set2) 1145 atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; 1146 } 1147 } else if (atkbd->set == 3) { 1148 memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode)); 1149 } else { 1150 memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); 1151 1152 if (atkbd->scroll) 1153 for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) { 1154 scancode = atkbd_scroll_keys[i].set2; 1155 atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode; 1156 } 1157 } 1158 1159 /* 1160 * HANGEUL and HANJA keys do not send release events so we need to 1161 * generate such events ourselves 1162 */ 1163 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL); 1164 atkbd->keycode[scancode] = KEY_HANGEUL; 1165 __set_bit(scancode, atkbd->force_release_mask); 1166 1167 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA); 1168 atkbd->keycode[scancode] = KEY_HANJA; 1169 __set_bit(scancode, atkbd->force_release_mask); 1170 1171 /* 1172 * Perform additional fixups 1173 */ 1174 if (atkbd_platform_fixup) 1175 atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data); 1176 } 1177 1178 /* 1179 * atkbd_set_device_attrs() sets up keyboard's input device structure 1180 */ 1181 1182 static void atkbd_set_device_attrs(struct atkbd *atkbd) 1183 { 1184 struct input_dev *input_dev = atkbd->dev; 1185 int i; 1186 1187 if (atkbd->extra) 1188 snprintf(atkbd->name, sizeof(atkbd->name), 1189 "AT Set 2 Extra keyboard"); 1190 else 1191 snprintf(atkbd->name, sizeof(atkbd->name), 1192 "AT %s Set %d keyboard", 1193 atkbd->translated ? "Translated" : "Raw", atkbd->set); 1194 1195 snprintf(atkbd->phys, sizeof(atkbd->phys), 1196 "%s/input0", atkbd->ps2dev.serio->phys); 1197 1198 input_dev->name = atkbd->name; 1199 input_dev->phys = atkbd->phys; 1200 input_dev->id.bustype = BUS_I8042; 1201 input_dev->id.vendor = 0x0001; 1202 input_dev->id.product = atkbd->translated ? 1 : atkbd->set; 1203 input_dev->id.version = atkbd->id; 1204 input_dev->event = atkbd_event; 1205 input_dev->dev.parent = &atkbd->ps2dev.serio->dev; 1206 1207 input_set_drvdata(input_dev, atkbd); 1208 1209 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | 1210 BIT_MASK(EV_MSC); 1211 1212 if (atkbd->write) { 1213 input_dev->evbit[0] |= BIT_MASK(EV_LED); 1214 input_dev->ledbit[0] = BIT_MASK(LED_NUML) | 1215 BIT_MASK(LED_CAPSL) | BIT_MASK(LED_SCROLLL); 1216 } 1217 1218 if (atkbd->extra) 1219 input_dev->ledbit[0] |= BIT_MASK(LED_COMPOSE) | 1220 BIT_MASK(LED_SUSPEND) | BIT_MASK(LED_SLEEP) | 1221 BIT_MASK(LED_MUTE) | BIT_MASK(LED_MISC); 1222 1223 if (!atkbd->softrepeat) { 1224 input_dev->rep[REP_DELAY] = 250; 1225 input_dev->rep[REP_PERIOD] = 33; 1226 } 1227 1228 input_dev->mscbit[0] = atkbd->softraw ? BIT_MASK(MSC_SCAN) : 1229 BIT_MASK(MSC_RAW) | BIT_MASK(MSC_SCAN); 1230 1231 if (atkbd->scroll) { 1232 input_dev->evbit[0] |= BIT_MASK(EV_REL); 1233 input_dev->relbit[0] = BIT_MASK(REL_WHEEL) | 1234 BIT_MASK(REL_HWHEEL); 1235 __set_bit(BTN_MIDDLE, input_dev->keybit); 1236 } 1237 1238 input_dev->keycode = atkbd->keycode; 1239 input_dev->keycodesize = sizeof(unsigned short); 1240 input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); 1241 1242 for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) { 1243 if (atkbd->keycode[i] != KEY_RESERVED && 1244 atkbd->keycode[i] != ATKBD_KEY_NULL && 1245 atkbd->keycode[i] < ATKBD_SPECIAL) { 1246 __set_bit(atkbd->keycode[i], input_dev->keybit); 1247 } 1248 } 1249 } 1250 1251 static void atkbd_parse_fwnode_data(struct serio *serio) 1252 { 1253 struct atkbd *atkbd = atkbd_from_serio(serio); 1254 struct device *dev = &serio->dev; 1255 int n; 1256 1257 /* Parse "function-row-physmap" property */ 1258 n = device_property_count_u32(dev, "function-row-physmap"); 1259 if (n > 0 && n <= VIVALDI_MAX_FUNCTION_ROW_KEYS && 1260 !device_property_read_u32_array(dev, "function-row-physmap", 1261 atkbd->vdata.function_row_physmap, 1262 n)) { 1263 atkbd->vdata.num_function_row_keys = n; 1264 dev_dbg(dev, "FW reported %d function-row key locations\n", n); 1265 } 1266 } 1267 1268 /* 1269 * atkbd_connect() is called when the serio module finds an interface 1270 * that isn't handled yet by an appropriate device driver. We check if 1271 * there is an AT keyboard out there and if yes, we register ourselves 1272 * to the input module. 1273 */ 1274 1275 static int atkbd_connect(struct serio *serio, struct serio_driver *drv) 1276 { 1277 struct atkbd *atkbd; 1278 struct input_dev *dev; 1279 int err = -ENOMEM; 1280 1281 atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL); 1282 dev = input_allocate_device(); 1283 if (!atkbd || !dev) 1284 goto fail1; 1285 1286 atkbd->dev = dev; 1287 ps2_init(&atkbd->ps2dev, serio, 1288 atkbd_pre_receive_byte, atkbd_receive_byte); 1289 INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work); 1290 mutex_init(&atkbd->mutex); 1291 1292 switch (serio->id.type) { 1293 1294 case SERIO_8042_XL: 1295 atkbd->translated = true; 1296 fallthrough; 1297 1298 case SERIO_8042: 1299 if (serio->write) 1300 atkbd->write = true; 1301 break; 1302 } 1303 1304 atkbd->softraw = atkbd_softraw; 1305 atkbd->softrepeat = atkbd_softrepeat; 1306 atkbd->scroll = atkbd_scroll; 1307 1308 if (atkbd->softrepeat) 1309 atkbd->softraw = true; 1310 1311 serio_set_drvdata(serio, atkbd); 1312 1313 err = serio_open(serio, drv); 1314 if (err) 1315 goto fail2; 1316 1317 if (atkbd->write) { 1318 1319 if (atkbd_probe(atkbd)) { 1320 err = -ENODEV; 1321 goto fail3; 1322 } 1323 1324 atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra); 1325 atkbd_reset_state(atkbd); 1326 1327 } else { 1328 atkbd->set = 2; 1329 atkbd->id = 0xab00; 1330 } 1331 1332 atkbd_parse_fwnode_data(serio); 1333 1334 atkbd_set_keycode_table(atkbd); 1335 atkbd_set_device_attrs(atkbd); 1336 1337 atkbd_enable(atkbd); 1338 if (serio->write) 1339 atkbd_activate(atkbd); 1340 1341 err = input_register_device(atkbd->dev); 1342 if (err) 1343 goto fail3; 1344 1345 return 0; 1346 1347 fail3: serio_close(serio); 1348 fail2: serio_set_drvdata(serio, NULL); 1349 fail1: input_free_device(dev); 1350 kfree(atkbd); 1351 return err; 1352 } 1353 1354 /* 1355 * atkbd_reconnect() tries to restore keyboard into a sane state and is 1356 * most likely called on resume. 1357 */ 1358 1359 static int atkbd_reconnect(struct serio *serio) 1360 { 1361 struct atkbd *atkbd = atkbd_from_serio(serio); 1362 struct serio_driver *drv = serio->drv; 1363 int retval = -1; 1364 1365 if (!atkbd || !drv) { 1366 dev_dbg(&serio->dev, 1367 "reconnect request, but serio is disconnected, ignoring...\n"); 1368 return -1; 1369 } 1370 1371 mutex_lock(&atkbd->mutex); 1372 1373 atkbd_disable(atkbd); 1374 1375 if (atkbd->write) { 1376 if (atkbd_probe(atkbd)) 1377 goto out; 1378 1379 if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra)) 1380 goto out; 1381 1382 /* 1383 * Restore LED state and repeat rate. While input core 1384 * will do this for us at resume time reconnect may happen 1385 * because user requested it via sysfs or simply because 1386 * keyboard was unplugged and plugged in again so we need 1387 * to do it ourselves here. 1388 */ 1389 atkbd_set_leds(atkbd); 1390 if (!atkbd->softrepeat) 1391 atkbd_set_repeat_rate(atkbd); 1392 1393 } 1394 1395 /* 1396 * Reset our state machine in case reconnect happened in the middle 1397 * of multi-byte scancode. 1398 */ 1399 atkbd->xl_bit = 0; 1400 atkbd->emul = 0; 1401 1402 atkbd_enable(atkbd); 1403 if (atkbd->write) 1404 atkbd_activate(atkbd); 1405 1406 retval = 0; 1407 1408 out: 1409 mutex_unlock(&atkbd->mutex); 1410 return retval; 1411 } 1412 1413 static const struct serio_device_id atkbd_serio_ids[] = { 1414 { 1415 .type = SERIO_8042, 1416 .proto = SERIO_ANY, 1417 .id = SERIO_ANY, 1418 .extra = SERIO_ANY, 1419 }, 1420 { 1421 .type = SERIO_8042_XL, 1422 .proto = SERIO_ANY, 1423 .id = SERIO_ANY, 1424 .extra = SERIO_ANY, 1425 }, 1426 { 1427 .type = SERIO_RS232, 1428 .proto = SERIO_PS2SER, 1429 .id = SERIO_ANY, 1430 .extra = SERIO_ANY, 1431 }, 1432 { 0 } 1433 }; 1434 1435 MODULE_DEVICE_TABLE(serio, atkbd_serio_ids); 1436 1437 static struct serio_driver atkbd_drv = { 1438 .driver = { 1439 .name = "atkbd", 1440 .dev_groups = atkbd_attribute_groups, 1441 }, 1442 .description = DRIVER_DESC, 1443 .id_table = atkbd_serio_ids, 1444 .interrupt = ps2_interrupt, 1445 .connect = atkbd_connect, 1446 .reconnect = atkbd_reconnect, 1447 .disconnect = atkbd_disconnect, 1448 .cleanup = atkbd_cleanup, 1449 }; 1450 1451 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, 1452 ssize_t (*handler)(struct atkbd *, char *)) 1453 { 1454 struct serio *serio = to_serio_port(dev); 1455 struct atkbd *atkbd = atkbd_from_serio(serio); 1456 1457 return handler(atkbd, buf); 1458 } 1459 1460 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, 1461 ssize_t (*handler)(struct atkbd *, const char *, size_t)) 1462 { 1463 struct serio *serio = to_serio_port(dev); 1464 struct atkbd *atkbd = atkbd_from_serio(serio); 1465 int retval; 1466 1467 retval = mutex_lock_interruptible(&atkbd->mutex); 1468 if (retval) 1469 return retval; 1470 1471 atkbd_disable(atkbd); 1472 retval = handler(atkbd, buf, count); 1473 atkbd_enable(atkbd); 1474 1475 mutex_unlock(&atkbd->mutex); 1476 1477 return retval; 1478 } 1479 1480 static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) 1481 { 1482 return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0); 1483 } 1484 1485 static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count) 1486 { 1487 struct input_dev *old_dev, *new_dev; 1488 unsigned int value; 1489 int err; 1490 bool old_extra; 1491 unsigned char old_set; 1492 1493 if (!atkbd->write) 1494 return -EIO; 1495 1496 err = kstrtouint(buf, 10, &value); 1497 if (err) 1498 return err; 1499 1500 if (value > 1) 1501 return -EINVAL; 1502 1503 if (atkbd->extra != value) { 1504 /* 1505 * Since device's properties will change we need to 1506 * unregister old device. But allocate and register 1507 * new one first to make sure we have it. 1508 */ 1509 old_dev = atkbd->dev; 1510 old_extra = atkbd->extra; 1511 old_set = atkbd->set; 1512 1513 new_dev = input_allocate_device(); 1514 if (!new_dev) 1515 return -ENOMEM; 1516 1517 atkbd->dev = new_dev; 1518 atkbd->set = atkbd_select_set(atkbd, atkbd->set, value); 1519 atkbd_reset_state(atkbd); 1520 atkbd_activate(atkbd); 1521 atkbd_set_keycode_table(atkbd); 1522 atkbd_set_device_attrs(atkbd); 1523 1524 err = input_register_device(atkbd->dev); 1525 if (err) { 1526 input_free_device(new_dev); 1527 1528 atkbd->dev = old_dev; 1529 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); 1530 atkbd_set_keycode_table(atkbd); 1531 atkbd_set_device_attrs(atkbd); 1532 1533 return err; 1534 } 1535 input_unregister_device(old_dev); 1536 1537 } 1538 return count; 1539 } 1540 1541 static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf) 1542 { 1543 size_t len = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", 1544 ATKBD_KEYMAP_SIZE, atkbd->force_release_mask); 1545 1546 buf[len++] = '\n'; 1547 buf[len] = '\0'; 1548 1549 return len; 1550 } 1551 1552 static ssize_t atkbd_set_force_release(struct atkbd *atkbd, 1553 const char *buf, size_t count) 1554 { 1555 /* 64 bytes on stack should be acceptable */ 1556 DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE); 1557 int err; 1558 1559 err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE); 1560 if (err) 1561 return err; 1562 1563 memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask)); 1564 return count; 1565 } 1566 1567 1568 static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) 1569 { 1570 return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0); 1571 } 1572 1573 static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count) 1574 { 1575 struct input_dev *old_dev, *new_dev; 1576 unsigned int value; 1577 int err; 1578 bool old_scroll; 1579 1580 err = kstrtouint(buf, 10, &value); 1581 if (err) 1582 return err; 1583 1584 if (value > 1) 1585 return -EINVAL; 1586 1587 if (atkbd->scroll != value) { 1588 old_dev = atkbd->dev; 1589 old_scroll = atkbd->scroll; 1590 1591 new_dev = input_allocate_device(); 1592 if (!new_dev) 1593 return -ENOMEM; 1594 1595 atkbd->dev = new_dev; 1596 atkbd->scroll = value; 1597 atkbd_set_keycode_table(atkbd); 1598 atkbd_set_device_attrs(atkbd); 1599 1600 err = input_register_device(atkbd->dev); 1601 if (err) { 1602 input_free_device(new_dev); 1603 1604 atkbd->scroll = old_scroll; 1605 atkbd->dev = old_dev; 1606 atkbd_set_keycode_table(atkbd); 1607 atkbd_set_device_attrs(atkbd); 1608 1609 return err; 1610 } 1611 input_unregister_device(old_dev); 1612 } 1613 return count; 1614 } 1615 1616 static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf) 1617 { 1618 return sprintf(buf, "%d\n", atkbd->set); 1619 } 1620 1621 static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) 1622 { 1623 struct input_dev *old_dev, *new_dev; 1624 unsigned int value; 1625 int err; 1626 unsigned char old_set; 1627 bool old_extra; 1628 1629 if (!atkbd->write) 1630 return -EIO; 1631 1632 err = kstrtouint(buf, 10, &value); 1633 if (err) 1634 return err; 1635 1636 if (value != 2 && value != 3) 1637 return -EINVAL; 1638 1639 if (atkbd->set != value) { 1640 old_dev = atkbd->dev; 1641 old_extra = atkbd->extra; 1642 old_set = atkbd->set; 1643 1644 new_dev = input_allocate_device(); 1645 if (!new_dev) 1646 return -ENOMEM; 1647 1648 atkbd->dev = new_dev; 1649 atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra); 1650 atkbd_reset_state(atkbd); 1651 atkbd_activate(atkbd); 1652 atkbd_set_keycode_table(atkbd); 1653 atkbd_set_device_attrs(atkbd); 1654 1655 err = input_register_device(atkbd->dev); 1656 if (err) { 1657 input_free_device(new_dev); 1658 1659 atkbd->dev = old_dev; 1660 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); 1661 atkbd_set_keycode_table(atkbd); 1662 atkbd_set_device_attrs(atkbd); 1663 1664 return err; 1665 } 1666 input_unregister_device(old_dev); 1667 } 1668 return count; 1669 } 1670 1671 static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf) 1672 { 1673 return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0); 1674 } 1675 1676 static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count) 1677 { 1678 struct input_dev *old_dev, *new_dev; 1679 unsigned int value; 1680 int err; 1681 bool old_softrepeat, old_softraw; 1682 1683 if (!atkbd->write) 1684 return -EIO; 1685 1686 err = kstrtouint(buf, 10, &value); 1687 if (err) 1688 return err; 1689 1690 if (value > 1) 1691 return -EINVAL; 1692 1693 if (atkbd->softrepeat != value) { 1694 old_dev = atkbd->dev; 1695 old_softrepeat = atkbd->softrepeat; 1696 old_softraw = atkbd->softraw; 1697 1698 new_dev = input_allocate_device(); 1699 if (!new_dev) 1700 return -ENOMEM; 1701 1702 atkbd->dev = new_dev; 1703 atkbd->softrepeat = value; 1704 if (atkbd->softrepeat) 1705 atkbd->softraw = true; 1706 atkbd_set_device_attrs(atkbd); 1707 1708 err = input_register_device(atkbd->dev); 1709 if (err) { 1710 input_free_device(new_dev); 1711 1712 atkbd->dev = old_dev; 1713 atkbd->softrepeat = old_softrepeat; 1714 atkbd->softraw = old_softraw; 1715 atkbd_set_device_attrs(atkbd); 1716 1717 return err; 1718 } 1719 input_unregister_device(old_dev); 1720 } 1721 return count; 1722 } 1723 1724 1725 static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf) 1726 { 1727 return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0); 1728 } 1729 1730 static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count) 1731 { 1732 struct input_dev *old_dev, *new_dev; 1733 unsigned int value; 1734 int err; 1735 bool old_softraw; 1736 1737 err = kstrtouint(buf, 10, &value); 1738 if (err) 1739 return err; 1740 1741 if (value > 1) 1742 return -EINVAL; 1743 1744 if (atkbd->softraw != value) { 1745 old_dev = atkbd->dev; 1746 old_softraw = atkbd->softraw; 1747 1748 new_dev = input_allocate_device(); 1749 if (!new_dev) 1750 return -ENOMEM; 1751 1752 atkbd->dev = new_dev; 1753 atkbd->softraw = value; 1754 atkbd_set_device_attrs(atkbd); 1755 1756 err = input_register_device(atkbd->dev); 1757 if (err) { 1758 input_free_device(new_dev); 1759 1760 atkbd->dev = old_dev; 1761 atkbd->softraw = old_softraw; 1762 atkbd_set_device_attrs(atkbd); 1763 1764 return err; 1765 } 1766 input_unregister_device(old_dev); 1767 } 1768 return count; 1769 } 1770 1771 static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf) 1772 { 1773 return sprintf(buf, "%lu\n", atkbd->err_count); 1774 } 1775 1776 static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) 1777 { 1778 atkbd_platform_fixup = atkbd_apply_forced_release_keylist; 1779 atkbd_platform_fixup_data = id->driver_data; 1780 1781 return 1; 1782 } 1783 1784 static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) 1785 { 1786 atkbd_platform_scancode_fixup = id->driver_data; 1787 1788 return 1; 1789 } 1790 1791 static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id) 1792 { 1793 atkbd_skip_deactivate = true; 1794 return 1; 1795 } 1796 1797 /* 1798 * NOTE: do not add any more "force release" quirks to this table. The 1799 * task of adjusting list of keys that should be "released" automatically 1800 * by the driver is now delegated to userspace tools, such as udev, so 1801 * submit such quirks there. 1802 */ 1803 static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { 1804 { 1805 .matches = { 1806 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), 1807 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ 1808 }, 1809 .callback = atkbd_setup_forced_release, 1810 .driver_data = atkbd_dell_laptop_forced_release_keys, 1811 }, 1812 { 1813 .matches = { 1814 DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), 1815 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ 1816 }, 1817 .callback = atkbd_setup_forced_release, 1818 .driver_data = atkbd_dell_laptop_forced_release_keys, 1819 }, 1820 { 1821 .matches = { 1822 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1823 DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"), 1824 }, 1825 .callback = atkbd_setup_forced_release, 1826 .driver_data = atkbd_hp_forced_release_keys, 1827 }, 1828 { 1829 .matches = { 1830 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1831 DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), 1832 }, 1833 .callback = atkbd_setup_forced_release, 1834 .driver_data = atkbd_volume_forced_release_keys, 1835 }, 1836 { 1837 .matches = { 1838 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1839 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"), 1840 }, 1841 .callback = atkbd_setup_forced_release, 1842 .driver_data = atkbd_volume_forced_release_keys, 1843 }, 1844 { 1845 .matches = { 1846 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1847 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"), 1848 }, 1849 .callback = atkbd_setup_forced_release, 1850 .driver_data = atkbd_volume_forced_release_keys, 1851 }, 1852 { 1853 .matches = { 1854 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1855 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"), 1856 }, 1857 .callback = atkbd_setup_forced_release, 1858 .driver_data = atkbd_volume_forced_release_keys, 1859 }, 1860 { 1861 /* Inventec Symphony */ 1862 .matches = { 1863 DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), 1864 DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), 1865 }, 1866 .callback = atkbd_setup_forced_release, 1867 .driver_data = atkbd_volume_forced_release_keys, 1868 }, 1869 { 1870 /* Samsung NC10 */ 1871 .matches = { 1872 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), 1873 DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), 1874 }, 1875 .callback = atkbd_setup_forced_release, 1876 .driver_data = atkbd_samsung_forced_release_keys, 1877 }, 1878 { 1879 /* Samsung NC20 */ 1880 .matches = { 1881 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), 1882 DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), 1883 }, 1884 .callback = atkbd_setup_forced_release, 1885 .driver_data = atkbd_samsung_forced_release_keys, 1886 }, 1887 { 1888 /* Samsung SQ45S70S */ 1889 .matches = { 1890 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), 1891 DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), 1892 }, 1893 .callback = atkbd_setup_forced_release, 1894 .driver_data = atkbd_samsung_forced_release_keys, 1895 }, 1896 { 1897 /* Fujitsu Amilo PA 1510 */ 1898 .matches = { 1899 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), 1900 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), 1901 }, 1902 .callback = atkbd_setup_forced_release, 1903 .driver_data = atkbd_volume_forced_release_keys, 1904 }, 1905 { 1906 /* Fujitsu Amilo Pi 3525 */ 1907 .matches = { 1908 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), 1909 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"), 1910 }, 1911 .callback = atkbd_setup_forced_release, 1912 .driver_data = atkbd_amilo_pi3525_forced_release_keys, 1913 }, 1914 { 1915 /* Fujitsu Amilo Xi 3650 */ 1916 .matches = { 1917 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), 1918 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), 1919 }, 1920 .callback = atkbd_setup_forced_release, 1921 .driver_data = atkbd_amilo_xi3650_forced_release_keys, 1922 }, 1923 { 1924 .matches = { 1925 DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"), 1926 DMI_MATCH(DMI_PRODUCT_NAME, "TA12"), 1927 }, 1928 .callback = atkbd_setup_forced_release, 1929 .driver_data = atkdb_soltech_ta12_forced_release_keys, 1930 }, 1931 { 1932 /* OQO Model 01+ */ 1933 .matches = { 1934 DMI_MATCH(DMI_SYS_VENDOR, "OQO"), 1935 DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), 1936 }, 1937 .callback = atkbd_setup_scancode_fixup, 1938 .driver_data = atkbd_oqo_01plus_scancode_fixup, 1939 }, 1940 { 1941 .matches = { 1942 DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), 1943 }, 1944 .callback = atkbd_deactivate_fixup, 1945 }, 1946 { } 1947 }; 1948 1949 static int __init atkbd_init(void) 1950 { 1951 dmi_check_system(atkbd_dmi_quirk_table); 1952 1953 return serio_register_driver(&atkbd_drv); 1954 } 1955 1956 static void __exit atkbd_exit(void) 1957 { 1958 serio_unregister_driver(&atkbd_drv); 1959 } 1960 1961 module_init(atkbd_init); 1962 module_exit(atkbd_exit); 1963