1# 2# Input core configuration 3# 4menuconfig INPUT_KEYBOARD 5 bool "Keyboards" if EMBEDDED || !X86 6 default y 7 help 8 Say Y here, and a list of supported keyboards will be displayed. 9 This option doesn't affect the kernel. 10 11 If unsure, say Y. 12 13if INPUT_KEYBOARD 14 15config KEYBOARD_ATKBD 16 tristate "AT keyboard" if EMBEDDED || !X86_PC 17 default y 18 select SERIO 19 select SERIO_LIBPS2 20 select SERIO_I8042 if X86_PC 21 select SERIO_GSCPS2 if GSC 22 help 23 Say Y here if you want to use a standard AT or PS/2 keyboard. Usually 24 you'll need this, unless you have a different type keyboard (USB, ADB 25 or other). This also works for AT and PS/2 keyboards connected over a 26 PS/2 to serial converter. 27 28 If unsure, say Y. 29 30 To compile this driver as a module, choose M here: the 31 module will be called atkbd. 32 33config KEYBOARD_ATKBD_HP_KEYCODES 34 bool "Use HP keyboard scancodes" 35 depends on PARISC && KEYBOARD_ATKBD 36 default y 37 help 38 Say Y here if you have a PA-RISC machine and want to use an AT or 39 PS/2 keyboard, and your keyboard uses keycodes that are specific to 40 PA-RISC keyboards. 41 42 Say N if you use a standard keyboard. 43 44config KEYBOARD_ATKBD_RDI_KEYCODES 45 bool "Use PrecisionBook keyboard scancodes" 46 depends on KEYBOARD_ATKBD_HP_KEYCODES 47 default n 48 help 49 If you have an RDI PrecisionBook, say Y here if you want to use its 50 built-in keyboard (as opposed to an external keyboard). 51 52 The PrecisionBook has five keys that conflict with those used by most 53 AT and PS/2 keyboards. These are as follows: 54 55 PrecisionBook Standard AT or PS/2 56 57 F1 F12 58 Left Ctrl Left Alt 59 Caps Lock Left Ctrl 60 Right Ctrl Caps Lock 61 Left 102nd key (the key to the right of Left Shift) 62 63 If you say N here, and use the PrecisionBook keyboard, then each key 64 in the left-hand column will be interpreted as the corresponding key 65 in the right-hand column. 66 67 If you say Y here, and use an external keyboard, then each key in the 68 right-hand column will be interpreted as the key shown in the 69 left-hand column. 70 71config KEYBOARD_SUNKBD 72 tristate "Sun Type 4 and Type 5 keyboard" 73 select SERIO 74 help 75 Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, 76 connected either to the Sun keyboard connector or to an serial 77 (RS-232) port via a simple adapter. 78 79 To compile this driver as a module, choose M here: the 80 module will be called sunkbd. 81 82config KEYBOARD_LKKBD 83 tristate "DECstation/VAXstation LK201/LK401 keyboard" 84 select SERIO 85 help 86 Say Y here if you want to use a LK201 or LK401 style serial 87 keyboard. This keyboard is also useable on PCs if you attach 88 it with the inputattach program. The connector pinout is 89 described within lkkbd.c. 90 91 To compile this driver as a module, choose M here: the 92 module will be called lkkbd. 93 94config KEYBOARD_LOCOMO 95 tristate "LoCoMo Keyboard Support" 96 depends on SHARP_LOCOMO && INPUT_KEYBOARD 97 help 98 Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA 99 100 To compile this driver as a module, choose M here: the 101 module will be called locomokbd. 102 103config KEYBOARD_XTKBD 104 tristate "XT keyboard" 105 select SERIO 106 help 107 Say Y here if you want to use the old IBM PC/XT keyboard (or 108 compatible) on your system. This is only possible with a 109 parallel port keyboard adapter, you cannot connect it to the 110 keyboard port on a PC that runs Linux. 111 112 To compile this driver as a module, choose M here: the 113 module will be called xtkbd. 114 115config KEYBOARD_NEWTON 116 tristate "Newton keyboard" 117 select SERIO 118 help 119 Say Y here if you have a Newton keyboard on a serial port. 120 121 To compile this driver as a module, choose M here: the 122 module will be called newtonkbd. 123 124config KEYBOARD_STOWAWAY 125 tristate "Stowaway keyboard" 126 select SERIO 127 help 128 Say Y here if you have a Stowaway keyboard on a serial port. 129 Stowaway compatible keyboards like Dicota Input-PDA keyboard 130 are also supported by this driver. 131 132 To compile this driver as a module, choose M here: the 133 module will be called stowaway. 134 135config KEYBOARD_CORGI 136 tristate "Corgi keyboard" 137 depends on PXA_SHARPSL 138 default y 139 help 140 Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx 141 series of PDAs. 142 143 To compile this driver as a module, choose M here: the 144 module will be called corgikbd. 145 146config KEYBOARD_SPITZ 147 tristate "Spitz keyboard" 148 depends on PXA_SHARPSL 149 default y 150 help 151 Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, 152 SL-C3000 and Sl-C3100 series of PDAs. 153 154 To compile this driver as a module, choose M here: the 155 module will be called spitzkbd. 156 157config KEYBOARD_AMIGA 158 tristate "Amiga keyboard" 159 depends on AMIGA 160 help 161 Say Y here if you are running Linux on any AMIGA and have a keyboard 162 attached. 163 164 To compile this driver as a module, choose M here: the 165 module will be called amikbd. 166 167config KEYBOARD_ATARI 168 tristate "Atari keyboard" 169 depends on ATARI 170 select ATARI_KBD_CORE 171 help 172 Say Y here if you are running Linux on any Atari and have a keyboard 173 attached. 174 175 To compile this driver as a module, choose M here: the 176 module will be called atakbd. 177 178config KEYBOARD_HIL_OLD 179 tristate "HP HIL keyboard support (simple driver)" 180 depends on GSC || HP300 181 default y 182 help 183 The "Human Interface Loop" is a older, 8-channel USB-like 184 controller used in several Hewlett Packard models. This driver 185 was adapted from the one written for m68k/hp300, and implements 186 support for a keyboard attached to the HIL port, but not for 187 any other types of HIL input devices like mice or tablets. 188 However, it has been thoroughly tested and is stable. 189 190 If you want full HIL support including support for multiple 191 keyboards, mice, and tablets, you have to enable the 192 "HP System Device Controller i8042 Support" in the input/serio 193 submenu. 194 195config KEYBOARD_HIL 196 tristate "HP HIL keyboard support" 197 depends on GSC || HP300 198 default y 199 select HP_SDC 200 select HIL_MLC 201 select SERIO 202 help 203 The "Human Interface Loop" is a older, 8-channel USB-like 204 controller used in several Hewlett Packard models. 205 This driver implements support for HIL-keyboards attached 206 to your machine, so normally you should say Y here. 207 208config KEYBOARD_OMAP 209 tristate "TI OMAP keypad support" 210 depends on (ARCH_OMAP1 || ARCH_OMAP2) 211 help 212 Say Y here if you want to use the OMAP keypad. 213 214 To compile this driver as a module, choose M here: the 215 module will be called omap-keypad. 216 217config KEYBOARD_PXA27x 218 tristate "PXA27x keyboard support" 219 depends on PXA27x 220 help 221 Enable support for PXA27x matrix keyboard controller 222 223 To compile this driver as a module, choose M here: the 224 module will be called pxa27x_keyboard. 225 226config KEYBOARD_AAED2000 227 tristate "AAED-2000 keyboard" 228 depends on MACH_AAED2000 229 select INPUT_POLLDEV 230 default y 231 help 232 Say Y here to enable the keyboard on the Agilent AAED-2000 233 development board. 234 235 To compile this driver as a module, choose M here: the 236 module will be called aaed2000_kbd. 237 238config KEYBOARD_GPIO 239 tristate "GPIO Buttons" 240 depends on GENERIC_GPIO 241 help 242 This driver implements support for buttons connected 243 to GPIO pins of various CPUs (and some other chips). 244 245 Say Y here if your device has buttons connected 246 directly to such GPIO pins. Your board-specific 247 setup logic must also provide a platform device, 248 with configuration data saying which GPIOs are used. 249 250 To compile this driver as a module, choose M here: the 251 module will be called gpio-keys. 252 253endif 254