1 /*
2  *  Copyright (c) 1999-2001 Vojtech Pavlik
3  *
4  *  Based on the work of:
5  *	David Thompson
6  */
7 
8 /*
9  * SpaceTec SpaceOrb 360 and Avenger 6dof controller driver for Linux
10  */
11 
12 /*
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of the GNU General Public License as published by
15  * the Free Software Foundation; either version 2 of the License, or
16  * (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26  */
27 
28 #include <linux/kernel.h>
29 #include <linux/slab.h>
30 #include <linux/module.h>
31 #include <linux/input.h>
32 #include <linux/serio.h>
33 
34 #define DRIVER_DESC	"SpaceTec SpaceOrb 360 and Avenger 6dof controller driver"
35 
36 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
37 MODULE_DESCRIPTION(DRIVER_DESC);
38 MODULE_LICENSE("GPL");
39 
40 /*
41  * Constants.
42  */
43 
44 #define SPACEORB_MAX_LENGTH	64
45 
46 static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A };
47 static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ };
48 
49 /*
50  * Per-Orb data.
51  */
52 
53 struct spaceorb {
54 	struct input_dev *dev;
55 	int idx;
56 	unsigned char data[SPACEORB_MAX_LENGTH];
57 	char phys[32];
58 };
59 
60 static unsigned char spaceorb_xor[] = "SpaceWare";
61 
62 static unsigned char *spaceorb_errors[] = { "EEPROM storing 0 failed", "Receive queue overflow", "Transmit queue timeout",
63 		"Bad packet", "Power brown-out", "EEPROM checksum error", "Hardware fault" };
64 
65 /*
66  * spaceorb_process_packet() decodes packets the driver receives from the
67  * SpaceOrb.
68  */
69 
70 static void spaceorb_process_packet(struct spaceorb *spaceorb)
71 {
72 	struct input_dev *dev = spaceorb->dev;
73 	unsigned char *data = spaceorb->data;
74 	unsigned char c = 0;
75 	int axes[6];
76 	int i;
77 
78 	if (spaceorb->idx < 2) return;
79 	for (i = 0; i < spaceorb->idx; i++) c ^= data[i];
80 	if (c) return;
81 
82 	switch (data[0]) {
83 
84 		case 'R':				/* Reset packet */
85 			spaceorb->data[spaceorb->idx - 1] = 0;
86 			for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++);
87 			printk(KERN_INFO "input: %s [%s] is %s\n",
88 				 dev->name, spaceorb->data + i, spaceorb->phys);
89 			break;
90 
91 		case 'D':				/* Ball + button data */
92 			if (spaceorb->idx != 12) return;
93 			for (i = 0; i < 9; i++) spaceorb->data[i+2] ^= spaceorb_xor[i];
94 			axes[0] = ( data[2]	 << 3) | (data[ 3] >> 4);
95 			axes[1] = ((data[3] & 0x0f) << 6) | (data[ 4] >> 1);
96 			axes[2] = ((data[4] & 0x01) << 9) | (data[ 5] << 2) | (data[4] >> 5);
97 			axes[3] = ((data[6] & 0x1f) << 5) | (data[ 7] >> 2);
98 			axes[4] = ((data[7] & 0x03) << 8) | (data[ 8] << 1) | (data[7] >> 6);
99 			axes[5] = ((data[9] & 0x3f) << 4) | (data[10] >> 3);
100 			for (i = 0; i < 6; i++)
101 				input_report_abs(dev, spaceorb_axes[i], axes[i] - ((axes[i] & 0x200) ? 1024 : 0));
102 			for (i = 0; i < 6; i++)
103 				input_report_key(dev, spaceorb_buttons[i], (data[1] >> i) & 1);
104 			break;
105 
106 		case 'K':				/* Button data */
107 			if (spaceorb->idx != 5) return;
108 			for (i = 0; i < 6; i++)
109 				input_report_key(dev, spaceorb_buttons[i], (data[2] >> i) & 1);
110 
111 			break;
112 
113 		case 'E':				/* Error packet */
114 			if (spaceorb->idx != 4) return;
115 			printk(KERN_ERR "spaceorb: Device error. [ ");
116 			for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]);
117 			printk("]\n");
118 			break;
119 	}
120 
121 	input_sync(dev);
122 }
123 
124 static irqreturn_t spaceorb_interrupt(struct serio *serio,
125 		unsigned char data, unsigned int flags)
126 {
127 	struct spaceorb* spaceorb = serio_get_drvdata(serio);
128 
129 	if (~data & 0x80) {
130 		if (spaceorb->idx) spaceorb_process_packet(spaceorb);
131 		spaceorb->idx = 0;
132 	}
133 	if (spaceorb->idx < SPACEORB_MAX_LENGTH)
134 		spaceorb->data[spaceorb->idx++] = data & 0x7f;
135 	return IRQ_HANDLED;
136 }
137 
138 /*
139  * spaceorb_disconnect() is the opposite of spaceorb_connect()
140  */
141 
142 static void spaceorb_disconnect(struct serio *serio)
143 {
144 	struct spaceorb* spaceorb = serio_get_drvdata(serio);
145 
146 	serio_close(serio);
147 	serio_set_drvdata(serio, NULL);
148 	input_unregister_device(spaceorb->dev);
149 	kfree(spaceorb);
150 }
151 
152 /*
153  * spaceorb_connect() is the routine that is called when someone adds a
154  * new serio device that supports SpaceOrb/Avenger protocol and registers
155  * it as an input device.
156  */
157 
158 static int spaceorb_connect(struct serio *serio, struct serio_driver *drv)
159 {
160 	struct spaceorb *spaceorb;
161 	struct input_dev *input_dev;
162 	int err = -ENOMEM;
163 	int i;
164 
165 	spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL);
166 	input_dev = input_allocate_device();
167 	if (!spaceorb || !input_dev)
168 		goto fail1;
169 
170 	spaceorb->dev = input_dev;
171 	snprintf(spaceorb->phys, sizeof(spaceorb->phys), "%s/input0", serio->phys);
172 
173 	input_dev->name = "SpaceTec SpaceOrb 360 / Avenger";
174 	input_dev->phys = spaceorb->phys;
175 	input_dev->id.bustype = BUS_RS232;
176 	input_dev->id.vendor = SERIO_SPACEORB;
177 	input_dev->id.product = 0x0001;
178 	input_dev->id.version = 0x0100;
179 	input_dev->dev.parent = &serio->dev;
180 
181 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
182 
183 	for (i = 0; i < 6; i++)
184 		set_bit(spaceorb_buttons[i], input_dev->keybit);
185 
186 	for (i = 0; i < 6; i++)
187 		input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0);
188 
189 	serio_set_drvdata(serio, spaceorb);
190 
191 	err = serio_open(serio, drv);
192 	if (err)
193 		goto fail2;
194 
195 	err = input_register_device(spaceorb->dev);
196 	if (err)
197 		goto fail3;
198 
199 	return 0;
200 
201  fail3:	serio_close(serio);
202  fail2:	serio_set_drvdata(serio, NULL);
203  fail1:	input_free_device(input_dev);
204 	kfree(spaceorb);
205 	return err;
206 }
207 
208 /*
209  * The serio driver structure.
210  */
211 
212 static const struct serio_device_id spaceorb_serio_ids[] = {
213 	{
214 		.type	= SERIO_RS232,
215 		.proto	= SERIO_SPACEORB,
216 		.id	= SERIO_ANY,
217 		.extra	= SERIO_ANY,
218 	},
219 	{ 0 }
220 };
221 
222 MODULE_DEVICE_TABLE(serio, spaceorb_serio_ids);
223 
224 static struct serio_driver spaceorb_drv = {
225 	.driver		= {
226 		.name	= "spaceorb",
227 	},
228 	.description	= DRIVER_DESC,
229 	.id_table	= spaceorb_serio_ids,
230 	.interrupt	= spaceorb_interrupt,
231 	.connect	= spaceorb_connect,
232 	.disconnect	= spaceorb_disconnect,
233 };
234 
235 module_serio_driver(spaceorb_drv);
236