1 /* 2 * Copyright (c) 1999-2001 Vojtech Pavlik 3 * 4 * Based on the work of: 5 * David Thompson 6 */ 7 8 /* 9 * SpaceTec SpaceOrb 360 and Avenger 6dof controller driver for Linux 10 */ 11 12 /* 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License as published by 15 * the Free Software Foundation; either version 2 of the License, or 16 * (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 26 * 27 * Should you need to contact me, the author, you can do so either by 28 * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: 29 * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic 30 */ 31 32 #include <linux/kernel.h> 33 #include <linux/slab.h> 34 #include <linux/module.h> 35 #include <linux/input.h> 36 #include <linux/serio.h> 37 38 #define DRIVER_DESC "SpaceTec SpaceOrb 360 and Avenger 6dof controller driver" 39 40 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); 41 MODULE_DESCRIPTION(DRIVER_DESC); 42 MODULE_LICENSE("GPL"); 43 44 /* 45 * Constants. 46 */ 47 48 #define SPACEORB_MAX_LENGTH 64 49 50 static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A }; 51 static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; 52 53 /* 54 * Per-Orb data. 55 */ 56 57 struct spaceorb { 58 struct input_dev *dev; 59 int idx; 60 unsigned char data[SPACEORB_MAX_LENGTH]; 61 char phys[32]; 62 }; 63 64 static unsigned char spaceorb_xor[] = "SpaceWare"; 65 66 static unsigned char *spaceorb_errors[] = { "EEPROM storing 0 failed", "Receive queue overflow", "Transmit queue timeout", 67 "Bad packet", "Power brown-out", "EEPROM checksum error", "Hardware fault" }; 68 69 /* 70 * spaceorb_process_packet() decodes packets the driver receives from the 71 * SpaceOrb. 72 */ 73 74 static void spaceorb_process_packet(struct spaceorb *spaceorb) 75 { 76 struct input_dev *dev = spaceorb->dev; 77 unsigned char *data = spaceorb->data; 78 unsigned char c = 0; 79 int axes[6]; 80 int i; 81 82 if (spaceorb->idx < 2) return; 83 for (i = 0; i < spaceorb->idx; i++) c ^= data[i]; 84 if (c) return; 85 86 switch (data[0]) { 87 88 case 'R': /* Reset packet */ 89 spaceorb->data[spaceorb->idx - 1] = 0; 90 for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++); 91 printk(KERN_INFO "input: %s [%s] is %s\n", 92 dev->name, spaceorb->data + i, spaceorb->phys); 93 break; 94 95 case 'D': /* Ball + button data */ 96 if (spaceorb->idx != 12) return; 97 for (i = 0; i < 9; i++) spaceorb->data[i+2] ^= spaceorb_xor[i]; 98 axes[0] = ( data[2] << 3) | (data[ 3] >> 4); 99 axes[1] = ((data[3] & 0x0f) << 6) | (data[ 4] >> 1); 100 axes[2] = ((data[4] & 0x01) << 9) | (data[ 5] << 2) | (data[4] >> 5); 101 axes[3] = ((data[6] & 0x1f) << 5) | (data[ 7] >> 2); 102 axes[4] = ((data[7] & 0x03) << 8) | (data[ 8] << 1) | (data[7] >> 6); 103 axes[5] = ((data[9] & 0x3f) << 4) | (data[10] >> 3); 104 for (i = 0; i < 6; i++) 105 input_report_abs(dev, spaceorb_axes[i], axes[i] - ((axes[i] & 0x200) ? 1024 : 0)); 106 for (i = 0; i < 6; i++) 107 input_report_key(dev, spaceorb_buttons[i], (data[1] >> i) & 1); 108 break; 109 110 case 'K': /* Button data */ 111 if (spaceorb->idx != 5) return; 112 for (i = 0; i < 6; i++) 113 input_report_key(dev, spaceorb_buttons[i], (data[2] >> i) & 1); 114 115 break; 116 117 case 'E': /* Error packet */ 118 if (spaceorb->idx != 4) return; 119 printk(KERN_ERR "spaceorb: Device error. [ "); 120 for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]); 121 printk("]\n"); 122 break; 123 } 124 125 input_sync(dev); 126 } 127 128 static irqreturn_t spaceorb_interrupt(struct serio *serio, 129 unsigned char data, unsigned int flags) 130 { 131 struct spaceorb* spaceorb = serio_get_drvdata(serio); 132 133 if (~data & 0x80) { 134 if (spaceorb->idx) spaceorb_process_packet(spaceorb); 135 spaceorb->idx = 0; 136 } 137 if (spaceorb->idx < SPACEORB_MAX_LENGTH) 138 spaceorb->data[spaceorb->idx++] = data & 0x7f; 139 return IRQ_HANDLED; 140 } 141 142 /* 143 * spaceorb_disconnect() is the opposite of spaceorb_connect() 144 */ 145 146 static void spaceorb_disconnect(struct serio *serio) 147 { 148 struct spaceorb* spaceorb = serio_get_drvdata(serio); 149 150 serio_close(serio); 151 serio_set_drvdata(serio, NULL); 152 input_unregister_device(spaceorb->dev); 153 kfree(spaceorb); 154 } 155 156 /* 157 * spaceorb_connect() is the routine that is called when someone adds a 158 * new serio device that supports SpaceOrb/Avenger protocol and registers 159 * it as an input device. 160 */ 161 162 static int spaceorb_connect(struct serio *serio, struct serio_driver *drv) 163 { 164 struct spaceorb *spaceorb; 165 struct input_dev *input_dev; 166 int err = -ENOMEM; 167 int i; 168 169 spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL); 170 input_dev = input_allocate_device(); 171 if (!spaceorb || !input_dev) 172 goto fail1; 173 174 spaceorb->dev = input_dev; 175 snprintf(spaceorb->phys, sizeof(spaceorb->phys), "%s/input0", serio->phys); 176 177 input_dev->name = "SpaceTec SpaceOrb 360 / Avenger"; 178 input_dev->phys = spaceorb->phys; 179 input_dev->id.bustype = BUS_RS232; 180 input_dev->id.vendor = SERIO_SPACEORB; 181 input_dev->id.product = 0x0001; 182 input_dev->id.version = 0x0100; 183 input_dev->dev.parent = &serio->dev; 184 185 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); 186 187 for (i = 0; i < 6; i++) 188 set_bit(spaceorb_buttons[i], input_dev->keybit); 189 190 for (i = 0; i < 6; i++) 191 input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0); 192 193 serio_set_drvdata(serio, spaceorb); 194 195 err = serio_open(serio, drv); 196 if (err) 197 goto fail2; 198 199 err = input_register_device(spaceorb->dev); 200 if (err) 201 goto fail3; 202 203 return 0; 204 205 fail3: serio_close(serio); 206 fail2: serio_set_drvdata(serio, NULL); 207 fail1: input_free_device(input_dev); 208 kfree(spaceorb); 209 return err; 210 } 211 212 /* 213 * The serio driver structure. 214 */ 215 216 static const struct serio_device_id spaceorb_serio_ids[] = { 217 { 218 .type = SERIO_RS232, 219 .proto = SERIO_SPACEORB, 220 .id = SERIO_ANY, 221 .extra = SERIO_ANY, 222 }, 223 { 0 } 224 }; 225 226 MODULE_DEVICE_TABLE(serio, spaceorb_serio_ids); 227 228 static struct serio_driver spaceorb_drv = { 229 .driver = { 230 .name = "spaceorb", 231 }, 232 .description = DRIVER_DESC, 233 .id_table = spaceorb_serio_ids, 234 .interrupt = spaceorb_interrupt, 235 .connect = spaceorb_connect, 236 .disconnect = spaceorb_disconnect, 237 }; 238 239 module_serio_driver(spaceorb_drv); 240