1 /* 2 * Copyright (c) 2013 Intel Corporation. All rights reserved. 3 * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved. 4 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. 5 * 6 * This software is available to you under a choice of one of two 7 * licenses. You may choose to be licensed under the terms of the GNU 8 * General Public License (GPL) Version 2, available from the file 9 * COPYING in the main directory of this source tree, or the 10 * OpenIB.org BSD license below: 11 * 12 * Redistribution and use in source and binary forms, with or 13 * without modification, are permitted provided that the following 14 * conditions are met: 15 * 16 * - Redistributions of source code must retain the above 17 * copyright notice, this list of conditions and the following 18 * disclaimer. 19 * 20 * - Redistributions in binary form must reproduce the above 21 * copyright notice, this list of conditions and the following 22 * disclaimer in the documentation and/or other materials 23 * provided with the distribution. 24 * 25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 32 * SOFTWARE. 33 */ 34 /* 35 * This file contains all of the code that is specific to the SerDes 36 * on the QLogic_IB 7220 chip. 37 */ 38 39 #include <linux/pci.h> 40 #include <linux/delay.h> 41 #include <linux/module.h> 42 #include <linux/firmware.h> 43 44 #include "qib.h" 45 #include "qib_7220.h" 46 47 #define SD7220_FW_NAME "qlogic/sd7220.fw" 48 MODULE_FIRMWARE(SD7220_FW_NAME); 49 50 /* 51 * Same as in qib_iba7220.c, but just the registers needed here. 52 * Could move whole set to qib_7220.h, but decided better to keep 53 * local. 54 */ 55 #define KREG_IDX(regname) (QIB_7220_##regname##_OFFS / sizeof(u64)) 56 #define kr_hwerrclear KREG_IDX(HwErrClear) 57 #define kr_hwerrmask KREG_IDX(HwErrMask) 58 #define kr_hwerrstatus KREG_IDX(HwErrStatus) 59 #define kr_ibcstatus KREG_IDX(IBCStatus) 60 #define kr_ibserdesctrl KREG_IDX(IBSerDesCtrl) 61 #define kr_scratch KREG_IDX(Scratch) 62 #define kr_xgxs_cfg KREG_IDX(XGXSCfg) 63 /* these are used only here, not in qib_iba7220.c */ 64 #define kr_ibsd_epb_access_ctrl KREG_IDX(ibsd_epb_access_ctrl) 65 #define kr_ibsd_epb_transaction_reg KREG_IDX(ibsd_epb_transaction_reg) 66 #define kr_pciesd_epb_transaction_reg KREG_IDX(pciesd_epb_transaction_reg) 67 #define kr_pciesd_epb_access_ctrl KREG_IDX(pciesd_epb_access_ctrl) 68 #define kr_serdes_ddsrxeq0 KREG_IDX(SerDes_DDSRXEQ0) 69 70 /* 71 * The IBSerDesMappTable is a memory that holds values to be stored in 72 * various SerDes registers by IBC. 73 */ 74 #define kr_serdes_maptable KREG_IDX(IBSerDesMappTable) 75 76 /* 77 * Below used for sdnum parameter, selecting one of the two sections 78 * used for PCIe, or the single SerDes used for IB. 79 */ 80 #define PCIE_SERDES0 0 81 #define PCIE_SERDES1 1 82 83 /* 84 * The EPB requires addressing in a particular form. EPB_LOC() is intended 85 * to make #definitions a little more readable. 86 */ 87 #define EPB_ADDR_SHF 8 88 #define EPB_LOC(chn, elt, reg) \ 89 (((elt & 0xf) | ((chn & 7) << 4) | ((reg & 0x3f) << 9)) << \ 90 EPB_ADDR_SHF) 91 #define EPB_IB_QUAD0_CS_SHF (25) 92 #define EPB_IB_QUAD0_CS (1U << EPB_IB_QUAD0_CS_SHF) 93 #define EPB_IB_UC_CS_SHF (26) 94 #define EPB_PCIE_UC_CS_SHF (27) 95 #define EPB_GLOBAL_WR (1U << (EPB_ADDR_SHF + 8)) 96 97 /* Forward declarations. */ 98 static int qib_sd7220_reg_mod(struct qib_devdata *dd, int sdnum, u32 loc, 99 u32 data, u32 mask); 100 static int ibsd_mod_allchnls(struct qib_devdata *dd, int loc, int val, 101 int mask); 102 static int qib_sd_trimdone_poll(struct qib_devdata *dd); 103 static void qib_sd_trimdone_monitor(struct qib_devdata *dd, const char *where); 104 static int qib_sd_setvals(struct qib_devdata *dd); 105 static int qib_sd_early(struct qib_devdata *dd); 106 static int qib_sd_dactrim(struct qib_devdata *dd); 107 static int qib_internal_presets(struct qib_devdata *dd); 108 /* Tweak the register (CMUCTRL5) that contains the TRIMSELF controls */ 109 static int qib_sd_trimself(struct qib_devdata *dd, int val); 110 static int epb_access(struct qib_devdata *dd, int sdnum, int claim); 111 static int qib_sd7220_ib_load(struct qib_devdata *dd, 112 const struct firmware *fw); 113 static int qib_sd7220_ib_vfy(struct qib_devdata *dd, 114 const struct firmware *fw); 115 116 /* 117 * Below keeps track of whether the "once per power-on" initialization has 118 * been done, because uC code Version 1.32.17 or higher allows the uC to 119 * be reset at will, and Automatic Equalization may require it. So the 120 * state of the reset "pin", is no longer valid. Instead, we check for the 121 * actual uC code having been loaded. 122 */ 123 static int qib_ibsd_ucode_loaded(struct qib_pportdata *ppd, 124 const struct firmware *fw) 125 { 126 struct qib_devdata *dd = ppd->dd; 127 128 if (!dd->cspec->serdes_first_init_done && 129 qib_sd7220_ib_vfy(dd, fw) > 0) 130 dd->cspec->serdes_first_init_done = 1; 131 return dd->cspec->serdes_first_init_done; 132 } 133 134 /* repeat #define for local use. "Real" #define is in qib_iba7220.c */ 135 #define QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL 136 #define IB_MPREG5 (EPB_LOC(6, 0, 0xE) | (1L << EPB_IB_UC_CS_SHF)) 137 #define IB_MPREG6 (EPB_LOC(6, 0, 0xF) | (1U << EPB_IB_UC_CS_SHF)) 138 #define UC_PAR_CLR_D 8 139 #define UC_PAR_CLR_M 0xC 140 #define IB_CTRL2(chn) (EPB_LOC(chn, 7, 3) | EPB_IB_QUAD0_CS) 141 #define START_EQ1(chan) EPB_LOC(chan, 7, 0x27) 142 143 void qib_sd7220_clr_ibpar(struct qib_devdata *dd) 144 { 145 int ret; 146 147 /* clear, then re-enable parity errs */ 148 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 149 UC_PAR_CLR_D, UC_PAR_CLR_M); 150 if (ret < 0) { 151 qib_dev_err(dd, "Failed clearing IBSerDes Parity err\n"); 152 goto bail; 153 } 154 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0, 155 UC_PAR_CLR_M); 156 157 qib_read_kreg32(dd, kr_scratch); 158 udelay(4); 159 qib_write_kreg(dd, kr_hwerrclear, 160 QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR); 161 qib_read_kreg32(dd, kr_scratch); 162 bail: 163 return; 164 } 165 166 /* 167 * After a reset or other unusual event, the epb interface may need 168 * to be re-synchronized, between the host and the uC. 169 * returns <0 for failure to resync within IBSD_RESYNC_TRIES (not expected) 170 */ 171 #define IBSD_RESYNC_TRIES 3 172 #define IB_PGUDP(chn) (EPB_LOC((chn), 2, 1) | EPB_IB_QUAD0_CS) 173 #define IB_CMUDONE(chn) (EPB_LOC((chn), 7, 0xF) | EPB_IB_QUAD0_CS) 174 175 static int qib_resync_ibepb(struct qib_devdata *dd) 176 { 177 int ret, pat, tries, chn; 178 u32 loc; 179 180 ret = -1; 181 chn = 0; 182 for (tries = 0; tries < (4 * IBSD_RESYNC_TRIES); ++tries) { 183 loc = IB_PGUDP(chn); 184 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0); 185 if (ret < 0) { 186 qib_dev_err(dd, "Failed read in resync\n"); 187 continue; 188 } 189 if (ret != 0xF0 && ret != 0x55 && tries == 0) 190 qib_dev_err(dd, "unexpected pattern in resync\n"); 191 pat = ret ^ 0xA5; /* alternate F0 and 55 */ 192 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, loc, pat, 0xFF); 193 if (ret < 0) { 194 qib_dev_err(dd, "Failed write in resync\n"); 195 continue; 196 } 197 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0); 198 if (ret < 0) { 199 qib_dev_err(dd, "Failed re-read in resync\n"); 200 continue; 201 } 202 if (ret != pat) { 203 qib_dev_err(dd, "Failed compare1 in resync\n"); 204 continue; 205 } 206 loc = IB_CMUDONE(chn); 207 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0); 208 if (ret < 0) { 209 qib_dev_err(dd, "Failed CMUDONE rd in resync\n"); 210 continue; 211 } 212 if ((ret & 0x70) != ((chn << 4) | 0x40)) { 213 qib_dev_err(dd, "Bad CMUDONE value %02X, chn %d\n", 214 ret, chn); 215 continue; 216 } 217 if (++chn == 4) 218 break; /* Success */ 219 } 220 return (ret > 0) ? 0 : ret; 221 } 222 223 /* 224 * Localize the stuff that should be done to change IB uC reset 225 * returns <0 for errors. 226 */ 227 static int qib_ibsd_reset(struct qib_devdata *dd, int assert_rst) 228 { 229 u64 rst_val; 230 int ret = 0; 231 unsigned long flags; 232 233 rst_val = qib_read_kreg64(dd, kr_ibserdesctrl); 234 if (assert_rst) { 235 /* 236 * Vendor recommends "interrupting" uC before reset, to 237 * minimize possible glitches. 238 */ 239 spin_lock_irqsave(&dd->cspec->sdepb_lock, flags); 240 epb_access(dd, IB_7220_SERDES, 1); 241 rst_val |= 1ULL; 242 /* Squelch possible parity error from _asserting_ reset */ 243 qib_write_kreg(dd, kr_hwerrmask, 244 dd->cspec->hwerrmask & 245 ~QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR); 246 qib_write_kreg(dd, kr_ibserdesctrl, rst_val); 247 /* flush write, delay to ensure it took effect */ 248 qib_read_kreg32(dd, kr_scratch); 249 udelay(2); 250 /* once it's reset, can remove interrupt */ 251 epb_access(dd, IB_7220_SERDES, -1); 252 spin_unlock_irqrestore(&dd->cspec->sdepb_lock, flags); 253 } else { 254 /* 255 * Before we de-assert reset, we need to deal with 256 * possible glitch on the Parity-error line. 257 * Suppress it around the reset, both in chip-level 258 * hwerrmask and in IB uC control reg. uC will allow 259 * it again during startup. 260 */ 261 u64 val; 262 263 rst_val &= ~(1ULL); 264 qib_write_kreg(dd, kr_hwerrmask, 265 dd->cspec->hwerrmask & 266 ~QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR); 267 268 ret = qib_resync_ibepb(dd); 269 if (ret < 0) 270 qib_dev_err(dd, "unable to re-sync IB EPB\n"); 271 272 /* set uC control regs to suppress parity errs */ 273 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG5, 1, 1); 274 if (ret < 0) 275 goto bail; 276 /* IB uC code past Version 1.32.17 allow suppression of wdog */ 277 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0x80, 278 0x80); 279 if (ret < 0) { 280 qib_dev_err(dd, "Failed to set WDOG disable\n"); 281 goto bail; 282 } 283 qib_write_kreg(dd, kr_ibserdesctrl, rst_val); 284 /* flush write, delay for startup */ 285 qib_read_kreg32(dd, kr_scratch); 286 udelay(1); 287 /* clear, then re-enable parity errs */ 288 qib_sd7220_clr_ibpar(dd); 289 val = qib_read_kreg64(dd, kr_hwerrstatus); 290 if (val & QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR) { 291 qib_dev_err(dd, "IBUC Parity still set after RST\n"); 292 dd->cspec->hwerrmask &= 293 ~QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR; 294 } 295 qib_write_kreg(dd, kr_hwerrmask, 296 dd->cspec->hwerrmask); 297 } 298 299 bail: 300 return ret; 301 } 302 303 static void qib_sd_trimdone_monitor(struct qib_devdata *dd, 304 const char *where) 305 { 306 int ret, chn, baduns; 307 u64 val; 308 309 if (!where) 310 where = "?"; 311 312 /* give time for reset to settle out in EPB */ 313 udelay(2); 314 315 ret = qib_resync_ibepb(dd); 316 if (ret < 0) 317 qib_dev_err(dd, "not able to re-sync IB EPB (%s)\n", where); 318 319 /* Do "sacrificial read" to get EPB in sane state after reset */ 320 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, IB_CTRL2(0), 0, 0); 321 if (ret < 0) 322 qib_dev_err(dd, "Failed TRIMDONE 1st read, (%s)\n", where); 323 324 /* Check/show "summary" Trim-done bit in IBCStatus */ 325 val = qib_read_kreg64(dd, kr_ibcstatus); 326 if (!(val & (1ULL << 11))) 327 qib_dev_err(dd, "IBCS TRIMDONE clear (%s)\n", where); 328 /* 329 * Do "dummy read/mod/wr" to get EPB in sane state after reset 330 * The default value for MPREG6 is 0. 331 */ 332 udelay(2); 333 334 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0x80, 0x80); 335 if (ret < 0) 336 qib_dev_err(dd, "Failed Dummy RMW, (%s)\n", where); 337 udelay(10); 338 339 baduns = 0; 340 341 for (chn = 3; chn >= 0; --chn) { 342 /* Read CTRL reg for each channel to check TRIMDONE */ 343 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, 344 IB_CTRL2(chn), 0, 0); 345 if (ret < 0) 346 qib_dev_err(dd, 347 "Failed checking TRIMDONE, chn %d (%s)\n", 348 chn, where); 349 350 if (!(ret & 0x10)) { 351 int probe; 352 353 baduns |= (1 << chn); 354 qib_dev_err(dd, 355 "TRIMDONE cleared on chn %d (%02X). (%s)\n", 356 chn, ret, where); 357 probe = qib_sd7220_reg_mod(dd, IB_7220_SERDES, 358 IB_PGUDP(0), 0, 0); 359 qib_dev_err(dd, "probe is %d (%02X)\n", 360 probe, probe); 361 probe = qib_sd7220_reg_mod(dd, IB_7220_SERDES, 362 IB_CTRL2(chn), 0, 0); 363 qib_dev_err(dd, "re-read: %d (%02X)\n", 364 probe, probe); 365 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, 366 IB_CTRL2(chn), 0x10, 0x10); 367 if (ret < 0) 368 qib_dev_err(dd, 369 "Err on TRIMDONE rewrite1\n"); 370 } 371 } 372 for (chn = 3; chn >= 0; --chn) { 373 /* Read CTRL reg for each channel to check TRIMDONE */ 374 if (baduns & (1 << chn)) { 375 qib_dev_err(dd, 376 "Resetting TRIMDONE on chn %d (%s)\n", 377 chn, where); 378 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, 379 IB_CTRL2(chn), 0x10, 0x10); 380 if (ret < 0) 381 qib_dev_err(dd, 382 "Failed re-setting TRIMDONE, chn %d (%s)\n", 383 chn, where); 384 } 385 } 386 } 387 388 /* 389 * Below is portion of IBA7220-specific bringup_serdes() that actually 390 * deals with registers and memory within the SerDes itself. 391 * Post IB uC code version 1.32.17, was_reset being 1 is not really 392 * informative, so we double-check. 393 */ 394 int qib_sd7220_init(struct qib_devdata *dd) 395 { 396 const struct firmware *fw; 397 int ret = 1; /* default to failure */ 398 int first_reset, was_reset; 399 400 /* SERDES MPU reset recorded in D0 */ 401 was_reset = (qib_read_kreg64(dd, kr_ibserdesctrl) & 1); 402 if (!was_reset) { 403 /* entered with reset not asserted, we need to do it */ 404 qib_ibsd_reset(dd, 1); 405 qib_sd_trimdone_monitor(dd, "Driver-reload"); 406 } 407 408 ret = request_firmware(&fw, SD7220_FW_NAME, &dd->pcidev->dev); 409 if (ret) { 410 qib_dev_err(dd, "Failed to load IB SERDES image\n"); 411 goto done; 412 } 413 414 /* Substitute our deduced value for was_reset */ 415 ret = qib_ibsd_ucode_loaded(dd->pport, fw); 416 if (ret < 0) 417 goto bail; 418 419 first_reset = !ret; /* First reset if IBSD uCode not yet loaded */ 420 /* 421 * Alter some regs per vendor latest doc, reset-defaults 422 * are not right for IB. 423 */ 424 ret = qib_sd_early(dd); 425 if (ret < 0) { 426 qib_dev_err(dd, "Failed to set IB SERDES early defaults\n"); 427 goto bail; 428 } 429 /* 430 * Set DAC manual trim IB. 431 * We only do this once after chip has been reset (usually 432 * same as once per system boot). 433 */ 434 if (first_reset) { 435 ret = qib_sd_dactrim(dd); 436 if (ret < 0) { 437 qib_dev_err(dd, "Failed IB SERDES DAC trim\n"); 438 goto bail; 439 } 440 } 441 /* 442 * Set various registers (DDS and RXEQ) that will be 443 * controlled by IBC (in 1.2 mode) to reasonable preset values 444 * Calling the "internal" version avoids the "check for needed" 445 * and "trimdone monitor" that might be counter-productive. 446 */ 447 ret = qib_internal_presets(dd); 448 if (ret < 0) { 449 qib_dev_err(dd, "Failed to set IB SERDES presets\n"); 450 goto bail; 451 } 452 ret = qib_sd_trimself(dd, 0x80); 453 if (ret < 0) { 454 qib_dev_err(dd, "Failed to set IB SERDES TRIMSELF\n"); 455 goto bail; 456 } 457 458 /* Load image, then try to verify */ 459 ret = 0; /* Assume success */ 460 if (first_reset) { 461 int vfy; 462 int trim_done; 463 464 ret = qib_sd7220_ib_load(dd, fw); 465 if (ret < 0) { 466 qib_dev_err(dd, "Failed to load IB SERDES image\n"); 467 goto bail; 468 } else { 469 /* Loaded image, try to verify */ 470 vfy = qib_sd7220_ib_vfy(dd, fw); 471 if (vfy != ret) { 472 qib_dev_err(dd, "SERDES PRAM VFY failed\n"); 473 goto bail; 474 } /* end if verified */ 475 } /* end if loaded */ 476 477 /* 478 * Loaded and verified. Almost good... 479 * hold "success" in ret 480 */ 481 ret = 0; 482 /* 483 * Prev steps all worked, continue bringup 484 * De-assert RESET to uC, only in first reset, to allow 485 * trimming. 486 * 487 * Since our default setup sets START_EQ1 to 488 * PRESET, we need to clear that for this very first run. 489 */ 490 ret = ibsd_mod_allchnls(dd, START_EQ1(0), 0, 0x38); 491 if (ret < 0) { 492 qib_dev_err(dd, "Failed clearing START_EQ1\n"); 493 goto bail; 494 } 495 496 qib_ibsd_reset(dd, 0); 497 /* 498 * If this is not the first reset, trimdone should be set 499 * already. We may need to check about this. 500 */ 501 trim_done = qib_sd_trimdone_poll(dd); 502 /* 503 * Whether or not trimdone succeeded, we need to put the 504 * uC back into reset to avoid a possible fight with the 505 * IBC state-machine. 506 */ 507 qib_ibsd_reset(dd, 1); 508 509 if (!trim_done) { 510 qib_dev_err(dd, "No TRIMDONE seen\n"); 511 goto bail; 512 } 513 /* 514 * DEBUG: check each time we reset if trimdone bits have 515 * gotten cleared, and re-set them. 516 */ 517 qib_sd_trimdone_monitor(dd, "First-reset"); 518 /* Remember so we do not re-do the load, dactrim, etc. */ 519 dd->cspec->serdes_first_init_done = 1; 520 } 521 /* 522 * setup for channel training and load values for 523 * RxEq and DDS in tables used by IBC in IB1.2 mode 524 */ 525 ret = 0; 526 if (qib_sd_setvals(dd) >= 0) 527 goto done; 528 bail: 529 ret = 1; 530 done: 531 /* start relock timer regardless, but start at 1 second */ 532 set_7220_relock_poll(dd, -1); 533 534 release_firmware(fw); 535 return ret; 536 } 537 538 #define EPB_ACC_REQ 1 539 #define EPB_ACC_GNT 0x100 540 #define EPB_DATA_MASK 0xFF 541 #define EPB_RD (1ULL << 24) 542 #define EPB_TRANS_RDY (1ULL << 31) 543 #define EPB_TRANS_ERR (1ULL << 30) 544 #define EPB_TRANS_TRIES 5 545 546 /* 547 * query, claim, release ownership of the EPB (External Parallel Bus) 548 * for a specified SERDES. 549 * the "claim" parameter is >0 to claim, <0 to release, 0 to query. 550 * Returns <0 for errors, >0 if we had ownership, else 0. 551 */ 552 static int epb_access(struct qib_devdata *dd, int sdnum, int claim) 553 { 554 u16 acc; 555 u64 accval; 556 int owned = 0; 557 u64 oct_sel = 0; 558 559 switch (sdnum) { 560 case IB_7220_SERDES: 561 /* 562 * The IB SERDES "ownership" is fairly simple. A single each 563 * request/grant. 564 */ 565 acc = kr_ibsd_epb_access_ctrl; 566 break; 567 568 case PCIE_SERDES0: 569 case PCIE_SERDES1: 570 /* PCIe SERDES has two "octants", need to select which */ 571 acc = kr_pciesd_epb_access_ctrl; 572 oct_sel = (2 << (sdnum - PCIE_SERDES0)); 573 break; 574 575 default: 576 return 0; 577 } 578 579 /* Make sure any outstanding transaction was seen */ 580 qib_read_kreg32(dd, kr_scratch); 581 udelay(15); 582 583 accval = qib_read_kreg32(dd, acc); 584 585 owned = !!(accval & EPB_ACC_GNT); 586 if (claim < 0) { 587 /* Need to release */ 588 u64 pollval; 589 /* 590 * The only writeable bits are the request and CS. 591 * Both should be clear 592 */ 593 u64 newval = 0; 594 595 qib_write_kreg(dd, acc, newval); 596 /* First read after write is not trustworthy */ 597 pollval = qib_read_kreg32(dd, acc); 598 udelay(5); 599 pollval = qib_read_kreg32(dd, acc); 600 if (pollval & EPB_ACC_GNT) 601 owned = -1; 602 } else if (claim > 0) { 603 /* Need to claim */ 604 u64 pollval; 605 u64 newval = EPB_ACC_REQ | oct_sel; 606 607 qib_write_kreg(dd, acc, newval); 608 /* First read after write is not trustworthy */ 609 pollval = qib_read_kreg32(dd, acc); 610 udelay(5); 611 pollval = qib_read_kreg32(dd, acc); 612 if (!(pollval & EPB_ACC_GNT)) 613 owned = -1; 614 } 615 return owned; 616 } 617 618 /* 619 * Lemma to deal with race condition of write..read to epb regs 620 */ 621 static int epb_trans(struct qib_devdata *dd, u16 reg, u64 i_val, u64 *o_vp) 622 { 623 int tries; 624 u64 transval; 625 626 qib_write_kreg(dd, reg, i_val); 627 /* Throw away first read, as RDY bit may be stale */ 628 transval = qib_read_kreg64(dd, reg); 629 630 for (tries = EPB_TRANS_TRIES; tries; --tries) { 631 transval = qib_read_kreg32(dd, reg); 632 if (transval & EPB_TRANS_RDY) 633 break; 634 udelay(5); 635 } 636 if (transval & EPB_TRANS_ERR) 637 return -1; 638 if (tries > 0 && o_vp) 639 *o_vp = transval; 640 return tries; 641 } 642 643 /** 644 * qib_sd7220_reg_mod - modify SERDES register 645 * @dd: the qlogic_ib device 646 * @sdnum: which SERDES to access 647 * @loc: location - channel, element, register, as packed by EPB_LOC() macro. 648 * @wd: Write Data - value to set in register 649 * @mask: ones where data should be spliced into reg. 650 * 651 * Basic register read/modify/write, with un-needed acesses elided. That is, 652 * a mask of zero will prevent write, while a mask of 0xFF will prevent read. 653 * returns current (presumed, if a write was done) contents of selected 654 * register, or <0 if errors. 655 */ 656 static int qib_sd7220_reg_mod(struct qib_devdata *dd, int sdnum, u32 loc, 657 u32 wd, u32 mask) 658 { 659 u16 trans; 660 u64 transval; 661 int owned; 662 int tries, ret; 663 unsigned long flags; 664 665 switch (sdnum) { 666 case IB_7220_SERDES: 667 trans = kr_ibsd_epb_transaction_reg; 668 break; 669 670 case PCIE_SERDES0: 671 case PCIE_SERDES1: 672 trans = kr_pciesd_epb_transaction_reg; 673 break; 674 675 default: 676 return -1; 677 } 678 679 /* 680 * All access is locked in software (vs other host threads) and 681 * hardware (vs uC access). 682 */ 683 spin_lock_irqsave(&dd->cspec->sdepb_lock, flags); 684 685 owned = epb_access(dd, sdnum, 1); 686 if (owned < 0) { 687 spin_unlock_irqrestore(&dd->cspec->sdepb_lock, flags); 688 return -1; 689 } 690 ret = 0; 691 for (tries = EPB_TRANS_TRIES; tries; --tries) { 692 transval = qib_read_kreg32(dd, trans); 693 if (transval & EPB_TRANS_RDY) 694 break; 695 udelay(5); 696 } 697 698 if (tries > 0) { 699 tries = 1; /* to make read-skip work */ 700 if (mask != 0xFF) { 701 /* 702 * Not a pure write, so need to read. 703 * loc encodes chip-select as well as address 704 */ 705 transval = loc | EPB_RD; 706 tries = epb_trans(dd, trans, transval, &transval); 707 } 708 if (tries > 0 && mask != 0) { 709 /* 710 * Not a pure read, so need to write. 711 */ 712 wd = (wd & mask) | (transval & ~mask); 713 transval = loc | (wd & EPB_DATA_MASK); 714 tries = epb_trans(dd, trans, transval, &transval); 715 } 716 } 717 /* else, failed to see ready, what error-handling? */ 718 719 /* 720 * Release bus. Failure is an error. 721 */ 722 if (epb_access(dd, sdnum, -1) < 0) 723 ret = -1; 724 else 725 ret = transval & EPB_DATA_MASK; 726 727 spin_unlock_irqrestore(&dd->cspec->sdepb_lock, flags); 728 if (tries <= 0) 729 ret = -1; 730 return ret; 731 } 732 733 #define EPB_ROM_R (2) 734 #define EPB_ROM_W (1) 735 /* 736 * Below, all uC-related, use appropriate UC_CS, depending 737 * on which SerDes is used. 738 */ 739 #define EPB_UC_CTL EPB_LOC(6, 0, 0) 740 #define EPB_MADDRL EPB_LOC(6, 0, 2) 741 #define EPB_MADDRH EPB_LOC(6, 0, 3) 742 #define EPB_ROMDATA EPB_LOC(6, 0, 4) 743 #define EPB_RAMDATA EPB_LOC(6, 0, 5) 744 745 /* Transfer date to/from uC Program RAM of IB or PCIe SerDes */ 746 static int qib_sd7220_ram_xfer(struct qib_devdata *dd, int sdnum, u32 loc, 747 u8 *buf, int cnt, int rd_notwr) 748 { 749 u16 trans; 750 u64 transval; 751 u64 csbit; 752 int owned; 753 int tries; 754 int sofar; 755 int addr; 756 int ret; 757 unsigned long flags; 758 const char *op; 759 760 /* Pick appropriate transaction reg and "Chip select" for this serdes */ 761 switch (sdnum) { 762 case IB_7220_SERDES: 763 csbit = 1ULL << EPB_IB_UC_CS_SHF; 764 trans = kr_ibsd_epb_transaction_reg; 765 break; 766 767 case PCIE_SERDES0: 768 case PCIE_SERDES1: 769 /* PCIe SERDES has uC "chip select" in different bit, too */ 770 csbit = 1ULL << EPB_PCIE_UC_CS_SHF; 771 trans = kr_pciesd_epb_transaction_reg; 772 break; 773 774 default: 775 return -1; 776 } 777 778 op = rd_notwr ? "Rd" : "Wr"; 779 spin_lock_irqsave(&dd->cspec->sdepb_lock, flags); 780 781 owned = epb_access(dd, sdnum, 1); 782 if (owned < 0) { 783 spin_unlock_irqrestore(&dd->cspec->sdepb_lock, flags); 784 return -1; 785 } 786 787 /* 788 * In future code, we may need to distinguish several address ranges, 789 * and select various memories based on this. For now, just trim 790 * "loc" (location including address and memory select) to 791 * "addr" (address within memory). we will only support PRAM 792 * The memory is 8KB. 793 */ 794 addr = loc & 0x1FFF; 795 for (tries = EPB_TRANS_TRIES; tries; --tries) { 796 transval = qib_read_kreg32(dd, trans); 797 if (transval & EPB_TRANS_RDY) 798 break; 799 udelay(5); 800 } 801 802 sofar = 0; 803 if (tries > 0) { 804 /* 805 * Every "memory" access is doubly-indirect. 806 * We set two bytes of address, then read/write 807 * one or mores bytes of data. 808 */ 809 810 /* First, we set control to "Read" or "Write" */ 811 transval = csbit | EPB_UC_CTL | 812 (rd_notwr ? EPB_ROM_R : EPB_ROM_W); 813 tries = epb_trans(dd, trans, transval, &transval); 814 while (tries > 0 && sofar < cnt) { 815 if (!sofar) { 816 /* Only set address at start of chunk */ 817 int addrbyte = (addr + sofar) >> 8; 818 819 transval = csbit | EPB_MADDRH | addrbyte; 820 tries = epb_trans(dd, trans, transval, 821 &transval); 822 if (tries <= 0) 823 break; 824 addrbyte = (addr + sofar) & 0xFF; 825 transval = csbit | EPB_MADDRL | addrbyte; 826 tries = epb_trans(dd, trans, transval, 827 &transval); 828 if (tries <= 0) 829 break; 830 } 831 832 if (rd_notwr) 833 transval = csbit | EPB_ROMDATA | EPB_RD; 834 else 835 transval = csbit | EPB_ROMDATA | buf[sofar]; 836 tries = epb_trans(dd, trans, transval, &transval); 837 if (tries <= 0) 838 break; 839 if (rd_notwr) 840 buf[sofar] = transval & EPB_DATA_MASK; 841 ++sofar; 842 } 843 /* Finally, clear control-bit for Read or Write */ 844 transval = csbit | EPB_UC_CTL; 845 tries = epb_trans(dd, trans, transval, &transval); 846 } 847 848 ret = sofar; 849 /* Release bus. Failure is an error */ 850 if (epb_access(dd, sdnum, -1) < 0) 851 ret = -1; 852 853 spin_unlock_irqrestore(&dd->cspec->sdepb_lock, flags); 854 if (tries <= 0) 855 ret = -1; 856 return ret; 857 } 858 859 #define PROG_CHUNK 64 860 861 static int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum, 862 const u8 *img, int len, int offset) 863 { 864 int cnt, sofar, req; 865 866 sofar = 0; 867 while (sofar < len) { 868 req = len - sofar; 869 if (req > PROG_CHUNK) 870 req = PROG_CHUNK; 871 cnt = qib_sd7220_ram_xfer(dd, sdnum, offset + sofar, 872 (u8 *)img + sofar, req, 0); 873 if (cnt < req) { 874 sofar = -1; 875 break; 876 } 877 sofar += req; 878 } 879 return sofar; 880 } 881 882 #define VFY_CHUNK 64 883 #define SD_PRAM_ERROR_LIMIT 42 884 885 static int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum, 886 const u8 *img, int len, int offset) 887 { 888 int cnt, sofar, req, idx, errors; 889 unsigned char readback[VFY_CHUNK]; 890 891 errors = 0; 892 sofar = 0; 893 while (sofar < len) { 894 req = len - sofar; 895 if (req > VFY_CHUNK) 896 req = VFY_CHUNK; 897 cnt = qib_sd7220_ram_xfer(dd, sdnum, sofar + offset, 898 readback, req, 1); 899 if (cnt < req) { 900 /* failed in read itself */ 901 sofar = -1; 902 break; 903 } 904 for (idx = 0; idx < cnt; ++idx) { 905 if (readback[idx] != img[idx+sofar]) 906 ++errors; 907 } 908 sofar += cnt; 909 } 910 return errors ? -errors : sofar; 911 } 912 913 static int 914 qib_sd7220_ib_load(struct qib_devdata *dd, const struct firmware *fw) 915 { 916 return qib_sd7220_prog_ld(dd, IB_7220_SERDES, fw->data, fw->size, 0); 917 } 918 919 static int 920 qib_sd7220_ib_vfy(struct qib_devdata *dd, const struct firmware *fw) 921 { 922 return qib_sd7220_prog_vfy(dd, IB_7220_SERDES, fw->data, fw->size, 0); 923 } 924 925 /* 926 * IRQ not set up at this point in init, so we poll. 927 */ 928 #define IB_SERDES_TRIM_DONE (1ULL << 11) 929 #define TRIM_TMO (15) 930 931 static int qib_sd_trimdone_poll(struct qib_devdata *dd) 932 { 933 int trim_tmo, ret; 934 uint64_t val; 935 936 /* 937 * Default to failure, so IBC will not start 938 * without IB_SERDES_TRIM_DONE. 939 */ 940 ret = 0; 941 for (trim_tmo = 0; trim_tmo < TRIM_TMO; ++trim_tmo) { 942 val = qib_read_kreg64(dd, kr_ibcstatus); 943 if (val & IB_SERDES_TRIM_DONE) { 944 ret = 1; 945 break; 946 } 947 msleep(20); 948 } 949 if (trim_tmo >= TRIM_TMO) { 950 qib_dev_err(dd, "No TRIMDONE in %d tries\n", trim_tmo); 951 ret = 0; 952 } 953 return ret; 954 } 955 956 #define TX_FAST_ELT (9) 957 958 /* 959 * Set the "negotiation" values for SERDES. These are used by the IB1.2 960 * link negotiation. Macros below are attempt to keep the values a 961 * little more human-editable. 962 * First, values related to Drive De-emphasis Settings. 963 */ 964 965 #define NUM_DDS_REGS 6 966 #define DDS_REG_MAP 0x76A910 /* LSB-first list of regs (in elt 9) to mod */ 967 968 #define DDS_VAL(amp_d, main_d, ipst_d, ipre_d, amp_s, main_s, ipst_s, ipre_s) \ 969 { { ((amp_d & 0x1F) << 1) | 1, ((amp_s & 0x1F) << 1) | 1, \ 970 (main_d << 3) | 4 | (ipre_d >> 2), \ 971 (main_s << 3) | 4 | (ipre_s >> 2), \ 972 ((ipst_d & 0xF) << 1) | ((ipre_d & 3) << 6) | 0x21, \ 973 ((ipst_s & 0xF) << 1) | ((ipre_s & 3) << 6) | 0x21 } } 974 975 static struct dds_init { 976 uint8_t reg_vals[NUM_DDS_REGS]; 977 } dds_init_vals[] = { 978 /* DDR(FDR) SDR(HDR) */ 979 /* Vendor recommends below for 3m cable */ 980 #define DDS_3M 0 981 DDS_VAL(31, 19, 12, 0, 29, 22, 9, 0), 982 DDS_VAL(31, 12, 15, 4, 31, 15, 15, 1), 983 DDS_VAL(31, 13, 15, 3, 31, 16, 15, 0), 984 DDS_VAL(31, 14, 15, 2, 31, 17, 14, 0), 985 DDS_VAL(31, 15, 15, 1, 31, 18, 13, 0), 986 DDS_VAL(31, 16, 15, 0, 31, 19, 12, 0), 987 DDS_VAL(31, 17, 14, 0, 31, 20, 11, 0), 988 DDS_VAL(31, 18, 13, 0, 30, 21, 10, 0), 989 DDS_VAL(31, 20, 11, 0, 28, 23, 8, 0), 990 DDS_VAL(31, 21, 10, 0, 27, 24, 7, 0), 991 DDS_VAL(31, 22, 9, 0, 26, 25, 6, 0), 992 DDS_VAL(30, 23, 8, 0, 25, 26, 5, 0), 993 DDS_VAL(29, 24, 7, 0, 23, 27, 4, 0), 994 /* Vendor recommends below for 1m cable */ 995 #define DDS_1M 13 996 DDS_VAL(28, 25, 6, 0, 21, 28, 3, 0), 997 DDS_VAL(27, 26, 5, 0, 19, 29, 2, 0), 998 DDS_VAL(25, 27, 4, 0, 17, 30, 1, 0) 999 }; 1000 1001 /* 1002 * Now the RXEQ section of the table. 1003 */ 1004 /* Hardware packs an element number and register address thus: */ 1005 #define RXEQ_INIT_RDESC(elt, addr) (((elt) & 0xF) | ((addr) << 4)) 1006 #define RXEQ_VAL(elt, adr, val0, val1, val2, val3) \ 1007 {RXEQ_INIT_RDESC((elt), (adr)), {(val0), (val1), (val2), (val3)} } 1008 1009 #define RXEQ_VAL_ALL(elt, adr, val) \ 1010 {RXEQ_INIT_RDESC((elt), (adr)), {(val), (val), (val), (val)} } 1011 1012 #define RXEQ_SDR_DFELTH 0 1013 #define RXEQ_SDR_TLTH 0 1014 #define RXEQ_SDR_G1CNT_Z1CNT 0x11 1015 #define RXEQ_SDR_ZCNT 23 1016 1017 static struct rxeq_init { 1018 u16 rdesc; /* in form used in SerDesDDSRXEQ */ 1019 u8 rdata[4]; 1020 } rxeq_init_vals[] = { 1021 /* Set Rcv Eq. to Preset node */ 1022 RXEQ_VAL_ALL(7, 0x27, 0x10), 1023 /* Set DFELTHFDR/HDR thresholds */ 1024 RXEQ_VAL(7, 8, 0, 0, 0, 0), /* FDR, was 0, 1, 2, 3 */ 1025 RXEQ_VAL(7, 0x21, 0, 0, 0, 0), /* HDR */ 1026 /* Set TLTHFDR/HDR theshold */ 1027 RXEQ_VAL(7, 9, 2, 2, 2, 2), /* FDR, was 0, 2, 4, 6 */ 1028 RXEQ_VAL(7, 0x23, 2, 2, 2, 2), /* HDR, was 0, 1, 2, 3 */ 1029 /* Set Preamp setting 2 (ZFR/ZCNT) */ 1030 RXEQ_VAL(7, 0x1B, 12, 12, 12, 12), /* FDR, was 12, 16, 20, 24 */ 1031 RXEQ_VAL(7, 0x1C, 12, 12, 12, 12), /* HDR, was 12, 16, 20, 24 */ 1032 /* Set Preamp DC gain and Setting 1 (GFR/GHR) */ 1033 RXEQ_VAL(7, 0x1E, 16, 16, 16, 16), /* FDR, was 16, 17, 18, 20 */ 1034 RXEQ_VAL(7, 0x1F, 16, 16, 16, 16), /* HDR, was 16, 17, 18, 20 */ 1035 /* Toggle RELOCK (in VCDL_CTRL0) to lock to data */ 1036 RXEQ_VAL_ALL(6, 6, 0x20), /* Set D5 High */ 1037 RXEQ_VAL_ALL(6, 6, 0), /* Set D5 Low */ 1038 }; 1039 1040 /* There are 17 values from vendor, but IBC only accesses the first 16 */ 1041 #define DDS_ROWS (16) 1042 #define RXEQ_ROWS ARRAY_SIZE(rxeq_init_vals) 1043 1044 static int qib_sd_setvals(struct qib_devdata *dd) 1045 { 1046 int idx, midx; 1047 int min_idx; /* Minimum index for this portion of table */ 1048 uint32_t dds_reg_map; 1049 u64 __iomem *taddr, *iaddr; 1050 uint64_t data; 1051 uint64_t sdctl; 1052 1053 taddr = dd->kregbase + kr_serdes_maptable; 1054 iaddr = dd->kregbase + kr_serdes_ddsrxeq0; 1055 1056 /* 1057 * Init the DDS section of the table. 1058 * Each "row" of the table provokes NUM_DDS_REG writes, to the 1059 * registers indicated in DDS_REG_MAP. 1060 */ 1061 sdctl = qib_read_kreg64(dd, kr_ibserdesctrl); 1062 sdctl = (sdctl & ~(0x1f << 8)) | (NUM_DDS_REGS << 8); 1063 sdctl = (sdctl & ~(0x1f << 13)) | (RXEQ_ROWS << 13); 1064 qib_write_kreg(dd, kr_ibserdesctrl, sdctl); 1065 1066 /* 1067 * Iterate down table within loop for each register to store. 1068 */ 1069 dds_reg_map = DDS_REG_MAP; 1070 for (idx = 0; idx < NUM_DDS_REGS; ++idx) { 1071 data = ((dds_reg_map & 0xF) << 4) | TX_FAST_ELT; 1072 writeq(data, iaddr + idx); 1073 mmiowb(); 1074 qib_read_kreg32(dd, kr_scratch); 1075 dds_reg_map >>= 4; 1076 for (midx = 0; midx < DDS_ROWS; ++midx) { 1077 u64 __iomem *daddr = taddr + ((midx << 4) + idx); 1078 1079 data = dds_init_vals[midx].reg_vals[idx]; 1080 writeq(data, daddr); 1081 mmiowb(); 1082 qib_read_kreg32(dd, kr_scratch); 1083 } /* End inner for (vals for this reg, each row) */ 1084 } /* end outer for (regs to be stored) */ 1085 1086 /* 1087 * Init the RXEQ section of the table. 1088 * This runs in a different order, as the pattern of 1089 * register references is more complex, but there are only 1090 * four "data" values per register. 1091 */ 1092 min_idx = idx; /* RXEQ indices pick up where DDS left off */ 1093 taddr += 0x100; /* RXEQ data is in second half of table */ 1094 /* Iterate through RXEQ register addresses */ 1095 for (idx = 0; idx < RXEQ_ROWS; ++idx) { 1096 int didx; /* "destination" */ 1097 int vidx; 1098 1099 /* didx is offset by min_idx to address RXEQ range of regs */ 1100 didx = idx + min_idx; 1101 /* Store the next RXEQ register address */ 1102 writeq(rxeq_init_vals[idx].rdesc, iaddr + didx); 1103 mmiowb(); 1104 qib_read_kreg32(dd, kr_scratch); 1105 /* Iterate through RXEQ values */ 1106 for (vidx = 0; vidx < 4; vidx++) { 1107 data = rxeq_init_vals[idx].rdata[vidx]; 1108 writeq(data, taddr + (vidx << 6) + idx); 1109 mmiowb(); 1110 qib_read_kreg32(dd, kr_scratch); 1111 } 1112 } /* end outer for (Reg-writes for RXEQ) */ 1113 return 0; 1114 } 1115 1116 #define CMUCTRL5 EPB_LOC(7, 0, 0x15) 1117 #define RXHSCTRL0(chan) EPB_LOC(chan, 6, 0) 1118 #define VCDL_DAC2(chan) EPB_LOC(chan, 6, 5) 1119 #define VCDL_CTRL0(chan) EPB_LOC(chan, 6, 6) 1120 #define VCDL_CTRL2(chan) EPB_LOC(chan, 6, 8) 1121 #define START_EQ2(chan) EPB_LOC(chan, 7, 0x28) 1122 1123 /* 1124 * Repeat a "store" across all channels of the IB SerDes. 1125 * Although nominally it inherits the "read value" of the last 1126 * channel it modified, the only really useful return is <0 for 1127 * failure, >= 0 for success. The parameter 'loc' is assumed to 1128 * be the location in some channel of the register to be modified 1129 * The caller can specify use of the "gang write" option of EPB, 1130 * in which case we use the specified channel data for any fields 1131 * not explicitely written. 1132 */ 1133 static int ibsd_mod_allchnls(struct qib_devdata *dd, int loc, int val, 1134 int mask) 1135 { 1136 int ret = -1; 1137 int chnl; 1138 1139 if (loc & EPB_GLOBAL_WR) { 1140 /* 1141 * Our caller has assured us that we can set all four 1142 * channels at once. Trust that. If mask is not 0xFF, 1143 * we will read the _specified_ channel for our starting 1144 * value. 1145 */ 1146 loc |= (1U << EPB_IB_QUAD0_CS_SHF); 1147 chnl = (loc >> (4 + EPB_ADDR_SHF)) & 7; 1148 if (mask != 0xFF) { 1149 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, 1150 loc & ~EPB_GLOBAL_WR, 0, 0); 1151 if (ret < 0) { 1152 int sloc = loc >> EPB_ADDR_SHF; 1153 1154 qib_dev_err(dd, 1155 "pre-read failed: elt %d, addr 0x%X, chnl %d\n", 1156 (sloc & 0xF), 1157 (sloc >> 9) & 0x3f, chnl); 1158 return ret; 1159 } 1160 val = (ret & ~mask) | (val & mask); 1161 } 1162 loc &= ~(7 << (4+EPB_ADDR_SHF)); 1163 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, loc, val, 0xFF); 1164 if (ret < 0) { 1165 int sloc = loc >> EPB_ADDR_SHF; 1166 1167 qib_dev_err(dd, 1168 "Global WR failed: elt %d, addr 0x%X, val %02X\n", 1169 (sloc & 0xF), (sloc >> 9) & 0x3f, val); 1170 } 1171 return ret; 1172 } 1173 /* Clear "channel" and set CS so we can simply iterate */ 1174 loc &= ~(7 << (4+EPB_ADDR_SHF)); 1175 loc |= (1U << EPB_IB_QUAD0_CS_SHF); 1176 for (chnl = 0; chnl < 4; ++chnl) { 1177 int cloc = loc | (chnl << (4+EPB_ADDR_SHF)); 1178 1179 ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, cloc, val, mask); 1180 if (ret < 0) { 1181 int sloc = loc >> EPB_ADDR_SHF; 1182 1183 qib_dev_err(dd, 1184 "Write failed: elt %d, addr 0x%X, chnl %d, val 0x%02X, mask 0x%02X\n", 1185 (sloc & 0xF), (sloc >> 9) & 0x3f, chnl, 1186 val & 0xFF, mask & 0xFF); 1187 break; 1188 } 1189 } 1190 return ret; 1191 } 1192 1193 /* 1194 * Set the Tx values normally modified by IBC in IB1.2 mode to default 1195 * values, as gotten from first row of init table. 1196 */ 1197 static int set_dds_vals(struct qib_devdata *dd, struct dds_init *ddi) 1198 { 1199 int ret; 1200 int idx, reg, data; 1201 uint32_t regmap; 1202 1203 regmap = DDS_REG_MAP; 1204 for (idx = 0; idx < NUM_DDS_REGS; ++idx) { 1205 reg = (regmap & 0xF); 1206 regmap >>= 4; 1207 data = ddi->reg_vals[idx]; 1208 /* Vendor says RMW not needed for these regs, use 0xFF mask */ 1209 ret = ibsd_mod_allchnls(dd, EPB_LOC(0, 9, reg), data, 0xFF); 1210 if (ret < 0) 1211 break; 1212 } 1213 return ret; 1214 } 1215 1216 /* 1217 * Set the Rx values normally modified by IBC in IB1.2 mode to default 1218 * values, as gotten from selected column of init table. 1219 */ 1220 static int set_rxeq_vals(struct qib_devdata *dd, int vsel) 1221 { 1222 int ret; 1223 int ridx; 1224 int cnt = ARRAY_SIZE(rxeq_init_vals); 1225 1226 for (ridx = 0; ridx < cnt; ++ridx) { 1227 int elt, reg, val, loc; 1228 1229 elt = rxeq_init_vals[ridx].rdesc & 0xF; 1230 reg = rxeq_init_vals[ridx].rdesc >> 4; 1231 loc = EPB_LOC(0, elt, reg); 1232 val = rxeq_init_vals[ridx].rdata[vsel]; 1233 /* mask of 0xFF, because hardware does full-byte store. */ 1234 ret = ibsd_mod_allchnls(dd, loc, val, 0xFF); 1235 if (ret < 0) 1236 break; 1237 } 1238 return ret; 1239 } 1240 1241 /* 1242 * Set the default values (row 0) for DDR Driver Demphasis. 1243 * we do this initially and whenever we turn off IB-1.2 1244 * 1245 * The "default" values for Rx equalization are also stored to 1246 * SerDes registers. Formerly (and still default), we used set 2. 1247 * For experimenting with cables and link-partners, we allow changing 1248 * that via a module parameter. 1249 */ 1250 static unsigned qib_rxeq_set = 2; 1251 module_param_named(rxeq_default_set, qib_rxeq_set, uint, 1252 S_IWUSR | S_IRUGO); 1253 MODULE_PARM_DESC(rxeq_default_set, 1254 "Which set [0..3] of Rx Equalization values is default"); 1255 1256 static int qib_internal_presets(struct qib_devdata *dd) 1257 { 1258 int ret = 0; 1259 1260 ret = set_dds_vals(dd, dds_init_vals + DDS_3M); 1261 1262 if (ret < 0) 1263 qib_dev_err(dd, "Failed to set default DDS values\n"); 1264 ret = set_rxeq_vals(dd, qib_rxeq_set & 3); 1265 if (ret < 0) 1266 qib_dev_err(dd, "Failed to set default RXEQ values\n"); 1267 return ret; 1268 } 1269 1270 int qib_sd7220_presets(struct qib_devdata *dd) 1271 { 1272 int ret = 0; 1273 1274 if (!dd->cspec->presets_needed) 1275 return ret; 1276 dd->cspec->presets_needed = 0; 1277 /* Assert uC reset, so we don't clash with it. */ 1278 qib_ibsd_reset(dd, 1); 1279 udelay(2); 1280 qib_sd_trimdone_monitor(dd, "link-down"); 1281 1282 ret = qib_internal_presets(dd); 1283 return ret; 1284 } 1285 1286 static int qib_sd_trimself(struct qib_devdata *dd, int val) 1287 { 1288 int loc = CMUCTRL5 | (1U << EPB_IB_QUAD0_CS_SHF); 1289 1290 return qib_sd7220_reg_mod(dd, IB_7220_SERDES, loc, val, 0xFF); 1291 } 1292 1293 static int qib_sd_early(struct qib_devdata *dd) 1294 { 1295 int ret; 1296 1297 ret = ibsd_mod_allchnls(dd, RXHSCTRL0(0) | EPB_GLOBAL_WR, 0xD4, 0xFF); 1298 if (ret < 0) 1299 goto bail; 1300 ret = ibsd_mod_allchnls(dd, START_EQ1(0) | EPB_GLOBAL_WR, 0x10, 0xFF); 1301 if (ret < 0) 1302 goto bail; 1303 ret = ibsd_mod_allchnls(dd, START_EQ2(0) | EPB_GLOBAL_WR, 0x30, 0xFF); 1304 bail: 1305 return ret; 1306 } 1307 1308 #define BACTRL(chnl) EPB_LOC(chnl, 6, 0x0E) 1309 #define LDOUTCTRL1(chnl) EPB_LOC(chnl, 7, 6) 1310 #define RXHSSTATUS(chnl) EPB_LOC(chnl, 6, 0xF) 1311 1312 static int qib_sd_dactrim(struct qib_devdata *dd) 1313 { 1314 int ret; 1315 1316 ret = ibsd_mod_allchnls(dd, VCDL_DAC2(0) | EPB_GLOBAL_WR, 0x2D, 0xFF); 1317 if (ret < 0) 1318 goto bail; 1319 1320 /* more fine-tuning of what will be default */ 1321 ret = ibsd_mod_allchnls(dd, VCDL_CTRL2(0), 3, 0xF); 1322 if (ret < 0) 1323 goto bail; 1324 1325 ret = ibsd_mod_allchnls(dd, BACTRL(0) | EPB_GLOBAL_WR, 0x40, 0xFF); 1326 if (ret < 0) 1327 goto bail; 1328 1329 ret = ibsd_mod_allchnls(dd, LDOUTCTRL1(0) | EPB_GLOBAL_WR, 0x04, 0xFF); 1330 if (ret < 0) 1331 goto bail; 1332 1333 ret = ibsd_mod_allchnls(dd, RXHSSTATUS(0) | EPB_GLOBAL_WR, 0x04, 0xFF); 1334 if (ret < 0) 1335 goto bail; 1336 1337 /* 1338 * Delay for max possible number of steps, with slop. 1339 * Each step is about 4usec. 1340 */ 1341 udelay(415); 1342 1343 ret = ibsd_mod_allchnls(dd, LDOUTCTRL1(0) | EPB_GLOBAL_WR, 0x00, 0xFF); 1344 1345 bail: 1346 return ret; 1347 } 1348 1349 #define RELOCK_FIRST_MS 3 1350 #define RXLSPPM(chan) EPB_LOC(chan, 0, 2) 1351 void toggle_7220_rclkrls(struct qib_devdata *dd) 1352 { 1353 int loc = RXLSPPM(0) | EPB_GLOBAL_WR; 1354 int ret; 1355 1356 ret = ibsd_mod_allchnls(dd, loc, 0, 0x80); 1357 if (ret < 0) 1358 qib_dev_err(dd, "RCLKRLS failed to clear D7\n"); 1359 else { 1360 udelay(1); 1361 ibsd_mod_allchnls(dd, loc, 0x80, 0x80); 1362 } 1363 /* And again for good measure */ 1364 udelay(1); 1365 ret = ibsd_mod_allchnls(dd, loc, 0, 0x80); 1366 if (ret < 0) 1367 qib_dev_err(dd, "RCLKRLS failed to clear D7\n"); 1368 else { 1369 udelay(1); 1370 ibsd_mod_allchnls(dd, loc, 0x80, 0x80); 1371 } 1372 /* Now reset xgxs and IBC to complete the recovery */ 1373 dd->f_xgxs_reset(dd->pport); 1374 } 1375 1376 /* 1377 * Shut down the timer that polls for relock occasions, if needed 1378 * this is "hooked" from qib_7220_quiet_serdes(), which is called 1379 * just before qib_shutdown_device() in qib_driver.c shuts down all 1380 * the other timers 1381 */ 1382 void shutdown_7220_relock_poll(struct qib_devdata *dd) 1383 { 1384 if (dd->cspec->relock_timer_active) 1385 del_timer_sync(&dd->cspec->relock_timer); 1386 } 1387 1388 static unsigned qib_relock_by_timer = 1; 1389 module_param_named(relock_by_timer, qib_relock_by_timer, uint, 1390 S_IWUSR | S_IRUGO); 1391 MODULE_PARM_DESC(relock_by_timer, "Allow relock attempt if link not up"); 1392 1393 static void qib_run_relock(unsigned long opaque) 1394 { 1395 struct qib_devdata *dd = (struct qib_devdata *)opaque; 1396 struct qib_pportdata *ppd = dd->pport; 1397 struct qib_chip_specific *cs = dd->cspec; 1398 int timeoff; 1399 1400 /* 1401 * Check link-training state for "stuck" state, when down. 1402 * if found, try relock and schedule another try at 1403 * exponentially growing delay, maxed at one second. 1404 * if not stuck, our work is done. 1405 */ 1406 if ((dd->flags & QIB_INITTED) && !(ppd->lflags & 1407 (QIBL_IB_AUTONEG_INPROG | QIBL_LINKINIT | QIBL_LINKARMED | 1408 QIBL_LINKACTIVE))) { 1409 if (qib_relock_by_timer) { 1410 if (!(ppd->lflags & QIBL_IB_LINK_DISABLED)) 1411 toggle_7220_rclkrls(dd); 1412 } 1413 /* re-set timer for next check */ 1414 timeoff = cs->relock_interval << 1; 1415 if (timeoff > HZ) 1416 timeoff = HZ; 1417 cs->relock_interval = timeoff; 1418 } else 1419 timeoff = HZ; 1420 mod_timer(&cs->relock_timer, jiffies + timeoff); 1421 } 1422 1423 void set_7220_relock_poll(struct qib_devdata *dd, int ibup) 1424 { 1425 struct qib_chip_specific *cs = dd->cspec; 1426 1427 if (ibup) { 1428 /* We are now up, relax timer to 1 second interval */ 1429 if (cs->relock_timer_active) { 1430 cs->relock_interval = HZ; 1431 mod_timer(&cs->relock_timer, jiffies + HZ); 1432 } 1433 } else { 1434 /* Transition to down, (re-)set timer to short interval. */ 1435 unsigned int timeout; 1436 1437 timeout = msecs_to_jiffies(RELOCK_FIRST_MS); 1438 if (timeout == 0) 1439 timeout = 1; 1440 /* If timer has not yet been started, do so. */ 1441 if (!cs->relock_timer_active) { 1442 cs->relock_timer_active = 1; 1443 init_timer(&cs->relock_timer); 1444 cs->relock_timer.function = qib_run_relock; 1445 cs->relock_timer.data = (unsigned long) dd; 1446 cs->relock_interval = timeout; 1447 cs->relock_timer.expires = jiffies + timeout; 1448 add_timer(&cs->relock_timer); 1449 } else { 1450 cs->relock_interval = timeout; 1451 mod_timer(&cs->relock_timer, jiffies + timeout); 1452 } 1453 } 1454 } 1455