1 /*
2  * Copyright (c) 2012 - 2017 Intel Corporation.  All rights reserved.
3  * Copyright (c) 2008 - 2012 QLogic Corporation. All rights reserved.
4  *
5  * This software is available to you under a choice of one of two
6  * licenses.  You may choose to be licensed under the terms of the GNU
7  * General Public License (GPL) Version 2, available from the file
8  * COPYING in the main directory of this source tree, or the
9  * OpenIB.org BSD license below:
10  *
11  *     Redistribution and use in source and binary forms, with or
12  *     without modification, are permitted provided that the following
13  *     conditions are met:
14  *
15  *      - Redistributions of source code must retain the above
16  *        copyright notice, this list of conditions and the following
17  *        disclaimer.
18  *
19  *      - Redistributions in binary form must reproduce the above
20  *        copyright notice, this list of conditions and the following
21  *        disclaimer in the documentation and/or other materials
22  *        provided with the distribution.
23  *
24  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
31  * SOFTWARE.
32  */
33 
34 /*
35  * This file contains all of the code that is specific to the
36  * InfiniPath 7322 chip
37  */
38 
39 #include <linux/interrupt.h>
40 #include <linux/pci.h>
41 #include <linux/delay.h>
42 #include <linux/io.h>
43 #include <linux/jiffies.h>
44 #include <linux/module.h>
45 #include <rdma/ib_verbs.h>
46 #include <rdma/ib_smi.h>
47 #ifdef CONFIG_INFINIBAND_QIB_DCA
48 #include <linux/dca.h>
49 #endif
50 
51 #include "qib.h"
52 #include "qib_7322_regs.h"
53 #include "qib_qsfp.h"
54 
55 #include "qib_mad.h"
56 #include "qib_verbs.h"
57 
58 #undef pr_fmt
59 #define pr_fmt(fmt) QIB_DRV_NAME " " fmt
60 
61 static void qib_setup_7322_setextled(struct qib_pportdata *, u32);
62 static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t);
63 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op);
64 static irqreturn_t qib_7322intr(int irq, void *data);
65 static irqreturn_t qib_7322bufavail(int irq, void *data);
66 static irqreturn_t sdma_intr(int irq, void *data);
67 static irqreturn_t sdma_idle_intr(int irq, void *data);
68 static irqreturn_t sdma_progress_intr(int irq, void *data);
69 static irqreturn_t sdma_cleanup_intr(int irq, void *data);
70 static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32,
71 				  struct qib_ctxtdata *rcd);
72 static u8 qib_7322_phys_portstate(u64);
73 static u32 qib_7322_iblink_state(u64);
74 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd,
75 				   u16 linitcmd);
76 static void force_h1(struct qib_pportdata *);
77 static void adj_tx_serdes(struct qib_pportdata *);
78 static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8);
79 static void qib_7322_mini_pcs_reset(struct qib_pportdata *);
80 
81 static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32);
82 static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned);
83 static void serdes_7322_los_enable(struct qib_pportdata *, int);
84 static int serdes_7322_init_old(struct qib_pportdata *);
85 static int serdes_7322_init_new(struct qib_pportdata *);
86 static void dump_sdma_7322_state(struct qib_pportdata *);
87 
88 #define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb))
89 
90 /* LE2 serdes values for different cases */
91 #define LE2_DEFAULT 5
92 #define LE2_5m 4
93 #define LE2_QME 0
94 
95 /* Below is special-purpose, so only really works for the IB SerDes blocks. */
96 #define IBSD(hw_pidx) (hw_pidx + 2)
97 
98 /* these are variables for documentation and experimentation purposes */
99 static const unsigned rcv_int_timeout = 375;
100 static const unsigned rcv_int_count = 16;
101 static const unsigned sdma_idle_cnt = 64;
102 
103 /* Time to stop altering Rx Equalization parameters, after link up. */
104 #define RXEQ_DISABLE_MSECS 2500
105 
106 /*
107  * Number of VLs we are configured to use (to allow for more
108  * credits per vl, etc.)
109  */
110 ushort qib_num_cfg_vls = 2;
111 module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO);
112 MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)");
113 
114 static ushort qib_chase = 1;
115 module_param_named(chase, qib_chase, ushort, S_IRUGO);
116 MODULE_PARM_DESC(chase, "Enable state chase handling");
117 
118 static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */
119 module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO);
120 MODULE_PARM_DESC(long_attenuation,
121 		 "attenuation cutoff (dB) for long copper cable setup");
122 
123 static ushort qib_singleport;
124 module_param_named(singleport, qib_singleport, ushort, S_IRUGO);
125 MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space");
126 
127 static ushort qib_krcvq01_no_msi;
128 module_param_named(krcvq01_no_msi, qib_krcvq01_no_msi, ushort, S_IRUGO);
129 MODULE_PARM_DESC(krcvq01_no_msi, "No MSI for kctx < 2");
130 
131 /*
132  * Receive header queue sizes
133  */
134 static unsigned qib_rcvhdrcnt;
135 module_param_named(rcvhdrcnt, qib_rcvhdrcnt, uint, S_IRUGO);
136 MODULE_PARM_DESC(rcvhdrcnt, "receive header count");
137 
138 static unsigned qib_rcvhdrsize;
139 module_param_named(rcvhdrsize, qib_rcvhdrsize, uint, S_IRUGO);
140 MODULE_PARM_DESC(rcvhdrsize, "receive header size in 32-bit words");
141 
142 static unsigned qib_rcvhdrentsize;
143 module_param_named(rcvhdrentsize, qib_rcvhdrentsize, uint, S_IRUGO);
144 MODULE_PARM_DESC(rcvhdrentsize, "receive header entry size in 32-bit words");
145 
146 #define MAX_ATTEN_LEN 64 /* plenty for any real system */
147 /* for read back, default index is ~5m copper cable */
148 static char txselect_list[MAX_ATTEN_LEN] = "10";
149 static struct kparam_string kp_txselect = {
150 	.string = txselect_list,
151 	.maxlen = MAX_ATTEN_LEN
152 };
153 static int  setup_txselect(const char *, const struct kernel_param *);
154 module_param_call(txselect, setup_txselect, param_get_string,
155 		  &kp_txselect, S_IWUSR | S_IRUGO);
156 MODULE_PARM_DESC(txselect,
157 		 "Tx serdes indices (for no QSFP or invalid QSFP data)");
158 
159 #define BOARD_QME7342 5
160 #define BOARD_QMH7342 6
161 #define BOARD_QMH7360 9
162 #define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \
163 		    BOARD_QMH7342)
164 #define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \
165 		    BOARD_QME7342)
166 
167 #define KREG_IDX(regname)     (QIB_7322_##regname##_OFFS / sizeof(u64))
168 
169 #define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64)))
170 
171 #define MASK_ACROSS(lsb, msb) \
172 	(((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb))
173 
174 #define SYM_RMASK(regname, fldname) ((u64)              \
175 	QIB_7322_##regname##_##fldname##_RMASK)
176 
177 #define SYM_MASK(regname, fldname) ((u64)               \
178 	QIB_7322_##regname##_##fldname##_RMASK <<       \
179 	 QIB_7322_##regname##_##fldname##_LSB)
180 
181 #define SYM_FIELD(value, regname, fldname) ((u64)	\
182 	(((value) >> SYM_LSB(regname, fldname)) &	\
183 	 SYM_RMASK(regname, fldname)))
184 
185 /* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */
186 #define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \
187 	(((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits))
188 
189 #define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask)
190 #define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask)
191 #define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask)
192 #define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask)
193 #define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port)
194 /* Below because most, but not all, fields of IntMask have that full suffix */
195 #define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port)
196 
197 
198 #define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB)
199 
200 /*
201  * the size bits give us 2^N, in KB units.  0 marks as invalid,
202  * and 7 is reserved.  We currently use only 2KB and 4KB
203  */
204 #define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB
205 #define IBA7322_TID_SZ_2K (1UL<<IBA7322_TID_SZ_SHIFT) /* 2KB */
206 #define IBA7322_TID_SZ_4K (2UL<<IBA7322_TID_SZ_SHIFT) /* 4KB */
207 #define IBA7322_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */
208 
209 #define SendIBSLIDAssignMask \
210 	QIB_7322_SendIBSLIDAssign_0_SendIBSLIDAssign_15_0_RMASK
211 #define SendIBSLMCMask \
212 	QIB_7322_SendIBSLIDMask_0_SendIBSLIDMask_15_0_RMASK
213 
214 #define ExtLED_IB1_YEL SYM_MASK(EXTCtrl, LEDPort0YellowOn)
215 #define ExtLED_IB1_GRN SYM_MASK(EXTCtrl, LEDPort0GreenOn)
216 #define ExtLED_IB2_YEL SYM_MASK(EXTCtrl, LEDPort1YellowOn)
217 #define ExtLED_IB2_GRN SYM_MASK(EXTCtrl, LEDPort1GreenOn)
218 #define ExtLED_IB1_MASK (ExtLED_IB1_YEL | ExtLED_IB1_GRN)
219 #define ExtLED_IB2_MASK (ExtLED_IB2_YEL | ExtLED_IB2_GRN)
220 
221 #define _QIB_GPIO_SDA_NUM 1
222 #define _QIB_GPIO_SCL_NUM 0
223 #define QIB_EEPROM_WEN_NUM 14
224 #define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7322 cards. */
225 
226 /* HW counter clock is at 4nsec */
227 #define QIB_7322_PSXMITWAIT_CHECK_RATE 4000
228 
229 /* full speed IB port 1 only */
230 #define PORT_SPD_CAP (QIB_IB_SDR | QIB_IB_DDR | QIB_IB_QDR)
231 #define PORT_SPD_CAP_SHIFT 3
232 
233 /* full speed featuremask, both ports */
234 #define DUAL_PORT_CAP (PORT_SPD_CAP | (PORT_SPD_CAP << PORT_SPD_CAP_SHIFT))
235 
236 /*
237  * This file contains almost all the chip-specific register information and
238  * access functions for the FAKED QLogic InfiniPath 7322 PCI-Express chip.
239  */
240 
241 /* Use defines to tie machine-generated names to lower-case names */
242 #define kr_contextcnt KREG_IDX(ContextCnt)
243 #define kr_control KREG_IDX(Control)
244 #define kr_counterregbase KREG_IDX(CntrRegBase)
245 #define kr_errclear KREG_IDX(ErrClear)
246 #define kr_errmask KREG_IDX(ErrMask)
247 #define kr_errstatus KREG_IDX(ErrStatus)
248 #define kr_extctrl KREG_IDX(EXTCtrl)
249 #define kr_extstatus KREG_IDX(EXTStatus)
250 #define kr_gpio_clear KREG_IDX(GPIOClear)
251 #define kr_gpio_mask KREG_IDX(GPIOMask)
252 #define kr_gpio_out KREG_IDX(GPIOOut)
253 #define kr_gpio_status KREG_IDX(GPIOStatus)
254 #define kr_hwdiagctrl KREG_IDX(HwDiagCtrl)
255 #define kr_debugportval KREG_IDX(DebugPortValueReg)
256 #define kr_fmask KREG_IDX(feature_mask)
257 #define kr_act_fmask KREG_IDX(active_feature_mask)
258 #define kr_hwerrclear KREG_IDX(HwErrClear)
259 #define kr_hwerrmask KREG_IDX(HwErrMask)
260 #define kr_hwerrstatus KREG_IDX(HwErrStatus)
261 #define kr_intclear KREG_IDX(IntClear)
262 #define kr_intmask KREG_IDX(IntMask)
263 #define kr_intredirect KREG_IDX(IntRedirect0)
264 #define kr_intstatus KREG_IDX(IntStatus)
265 #define kr_pagealign KREG_IDX(PageAlign)
266 #define kr_rcvavailtimeout KREG_IDX(RcvAvailTimeOut0)
267 #define kr_rcvctrl KREG_IDX(RcvCtrl) /* Common, but chip also has per-port */
268 #define kr_rcvegrbase KREG_IDX(RcvEgrBase)
269 #define kr_rcvegrcnt KREG_IDX(RcvEgrCnt)
270 #define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt)
271 #define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize)
272 #define kr_rcvhdrsize KREG_IDX(RcvHdrSize)
273 #define kr_rcvtidbase KREG_IDX(RcvTIDBase)
274 #define kr_rcvtidcnt KREG_IDX(RcvTIDCnt)
275 #define kr_revision KREG_IDX(Revision)
276 #define kr_scratch KREG_IDX(Scratch)
277 #define kr_sendbuffererror KREG_IDX(SendBufErr0) /* and base for 1 and 2 */
278 #define kr_sendcheckmask KREG_IDX(SendCheckMask0) /* and 1, 2 */
279 #define kr_sendctrl KREG_IDX(SendCtrl)
280 #define kr_sendgrhcheckmask KREG_IDX(SendGRHCheckMask0) /* and 1, 2 */
281 #define kr_sendibpktmask KREG_IDX(SendIBPacketMask0) /* and 1, 2 */
282 #define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr)
283 #define kr_sendpiobufbase KREG_IDX(SendBufBase)
284 #define kr_sendpiobufcnt KREG_IDX(SendBufCnt)
285 #define kr_sendpiosize KREG_IDX(SendBufSize)
286 #define kr_sendregbase KREG_IDX(SendRegBase)
287 #define kr_sendbufavail0 KREG_IDX(SendBufAvail0)
288 #define kr_userregbase KREG_IDX(UserRegBase)
289 #define kr_intgranted KREG_IDX(Int_Granted)
290 #define kr_vecclr_wo_int KREG_IDX(vec_clr_without_int)
291 #define kr_intblocked KREG_IDX(IntBlocked)
292 #define kr_r_access KREG_IDX(SPC_JTAG_ACCESS_REG)
293 
294 /*
295  * per-port kernel registers.  Access only with qib_read_kreg_port()
296  * or qib_write_kreg_port()
297  */
298 #define krp_errclear KREG_IBPORT_IDX(ErrClear)
299 #define krp_errmask KREG_IBPORT_IDX(ErrMask)
300 #define krp_errstatus KREG_IBPORT_IDX(ErrStatus)
301 #define krp_highprio_0 KREG_IBPORT_IDX(HighPriority0)
302 #define krp_highprio_limit KREG_IBPORT_IDX(HighPriorityLimit)
303 #define krp_hrtbt_guid KREG_IBPORT_IDX(HRTBT_GUID)
304 #define krp_ib_pcsconfig KREG_IBPORT_IDX(IBPCSConfig)
305 #define krp_ibcctrl_a KREG_IBPORT_IDX(IBCCtrlA)
306 #define krp_ibcctrl_b KREG_IBPORT_IDX(IBCCtrlB)
307 #define krp_ibcctrl_c KREG_IBPORT_IDX(IBCCtrlC)
308 #define krp_ibcstatus_a KREG_IBPORT_IDX(IBCStatusA)
309 #define krp_ibcstatus_b KREG_IBPORT_IDX(IBCStatusB)
310 #define krp_txestatus KREG_IBPORT_IDX(TXEStatus)
311 #define krp_lowprio_0 KREG_IBPORT_IDX(LowPriority0)
312 #define krp_ncmodectrl KREG_IBPORT_IDX(IBNCModeCtrl)
313 #define krp_partitionkey KREG_IBPORT_IDX(RcvPartitionKey)
314 #define krp_psinterval KREG_IBPORT_IDX(PSInterval)
315 #define krp_psstart KREG_IBPORT_IDX(PSStart)
316 #define krp_psstat KREG_IBPORT_IDX(PSStat)
317 #define krp_rcvbthqp KREG_IBPORT_IDX(RcvBTHQP)
318 #define krp_rcvctrl KREG_IBPORT_IDX(RcvCtrl)
319 #define krp_rcvpktledcnt KREG_IBPORT_IDX(RcvPktLEDCnt)
320 #define krp_rcvqpmaptable KREG_IBPORT_IDX(RcvQPMapTableA)
321 #define krp_rxcreditvl0 KREG_IBPORT_IDX(RxCreditVL0)
322 #define krp_rxcreditvl15 (KREG_IBPORT_IDX(RxCreditVL0)+15)
323 #define krp_sendcheckcontrol KREG_IBPORT_IDX(SendCheckControl)
324 #define krp_sendctrl KREG_IBPORT_IDX(SendCtrl)
325 #define krp_senddmabase KREG_IBPORT_IDX(SendDmaBase)
326 #define krp_senddmabufmask0 KREG_IBPORT_IDX(SendDmaBufMask0)
327 #define krp_senddmabufmask1 (KREG_IBPORT_IDX(SendDmaBufMask0) + 1)
328 #define krp_senddmabufmask2 (KREG_IBPORT_IDX(SendDmaBufMask0) + 2)
329 #define krp_senddmabuf_use0 KREG_IBPORT_IDX(SendDmaBufUsed0)
330 #define krp_senddmabuf_use1 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 1)
331 #define krp_senddmabuf_use2 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 2)
332 #define krp_senddmadesccnt KREG_IBPORT_IDX(SendDmaDescCnt)
333 #define krp_senddmahead KREG_IBPORT_IDX(SendDmaHead)
334 #define krp_senddmaheadaddr KREG_IBPORT_IDX(SendDmaHeadAddr)
335 #define krp_senddmaidlecnt KREG_IBPORT_IDX(SendDmaIdleCnt)
336 #define krp_senddmalengen KREG_IBPORT_IDX(SendDmaLenGen)
337 #define krp_senddmaprioritythld KREG_IBPORT_IDX(SendDmaPriorityThld)
338 #define krp_senddmareloadcnt KREG_IBPORT_IDX(SendDmaReloadCnt)
339 #define krp_senddmastatus KREG_IBPORT_IDX(SendDmaStatus)
340 #define krp_senddmatail KREG_IBPORT_IDX(SendDmaTail)
341 #define krp_sendhdrsymptom KREG_IBPORT_IDX(SendHdrErrSymptom)
342 #define krp_sendslid KREG_IBPORT_IDX(SendIBSLIDAssign)
343 #define krp_sendslidmask KREG_IBPORT_IDX(SendIBSLIDMask)
344 #define krp_ibsdtestiftx KREG_IBPORT_IDX(IB_SDTEST_IF_TX)
345 #define krp_adapt_dis_timer KREG_IBPORT_IDX(ADAPT_DISABLE_TIMER_THRESHOLD)
346 #define krp_tx_deemph_override KREG_IBPORT_IDX(IBSD_TX_DEEMPHASIS_OVERRIDE)
347 #define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl)
348 
349 /*
350  * Per-context kernel registers.  Access only with qib_read_kreg_ctxt()
351  * or qib_write_kreg_ctxt()
352  */
353 #define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0)
354 #define krc_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0)
355 
356 /*
357  * TID Flow table, per context.  Reduces
358  * number of hdrq updates to one per flow (or on errors).
359  * context 0 and 1 share same memory, but have distinct
360  * addresses.  Since for now, we never use expected sends
361  * on kernel contexts, we don't worry about that (we initialize
362  * those entries for ctxt 0/1 on driver load twice, for example).
363  */
364 #define NUM_TIDFLOWS_CTXT 0x20 /* 0x20 per context; have to hardcode */
365 #define ur_rcvflowtable (KREG_IDX(RcvTIDFlowTable0) - KREG_IDX(RcvHdrTail0))
366 
367 /* these are the error bits in the tid flows, and are W1C */
368 #define TIDFLOW_ERRBITS  ( \
369 	(SYM_MASK(RcvTIDFlowTable0, GenMismatch) << \
370 	SYM_LSB(RcvTIDFlowTable0, GenMismatch)) | \
371 	(SYM_MASK(RcvTIDFlowTable0, SeqMismatch) << \
372 	SYM_LSB(RcvTIDFlowTable0, SeqMismatch)))
373 
374 /* Most (not all) Counters are per-IBport.
375  * Requires LBIntCnt is at offset 0 in the group
376  */
377 #define CREG_IDX(regname) \
378 ((QIB_7322_##regname##_0_OFFS - QIB_7322_LBIntCnt_OFFS) / sizeof(u64))
379 
380 #define crp_badformat CREG_IDX(RxVersionErrCnt)
381 #define crp_err_rlen CREG_IDX(RxLenErrCnt)
382 #define crp_erricrc CREG_IDX(RxICRCErrCnt)
383 #define crp_errlink CREG_IDX(RxLinkMalformCnt)
384 #define crp_errlpcrc CREG_IDX(RxLPCRCErrCnt)
385 #define crp_errpkey CREG_IDX(RxPKeyMismatchCnt)
386 #define crp_errvcrc CREG_IDX(RxVCRCErrCnt)
387 #define crp_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt)
388 #define crp_iblinkdown CREG_IDX(IBLinkDownedCnt)
389 #define crp_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt)
390 #define crp_ibstatuschange CREG_IDX(IBStatusChangeCnt)
391 #define crp_ibsymbolerr CREG_IDX(IBSymbolErrCnt)
392 #define crp_invalidrlen CREG_IDX(RxMaxMinLenErrCnt)
393 #define crp_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt)
394 #define crp_pktrcv CREG_IDX(RxDataPktCnt)
395 #define crp_pktrcvflowctrl CREG_IDX(RxFlowPktCnt)
396 #define crp_pktsend CREG_IDX(TxDataPktCnt)
397 #define crp_pktsendflow CREG_IDX(TxFlowPktCnt)
398 #define crp_psrcvdatacount CREG_IDX(PSRcvDataCount)
399 #define crp_psrcvpktscount CREG_IDX(PSRcvPktsCount)
400 #define crp_psxmitdatacount CREG_IDX(PSXmitDataCount)
401 #define crp_psxmitpktscount CREG_IDX(PSXmitPktsCount)
402 #define crp_psxmitwaitcount CREG_IDX(PSXmitWaitCount)
403 #define crp_rcvebp CREG_IDX(RxEBPCnt)
404 #define crp_rcvflowctrlviol CREG_IDX(RxFlowCtrlViolCnt)
405 #define crp_rcvovfl CREG_IDX(RxBufOvflCnt)
406 #define crp_rxdlidfltr CREG_IDX(RxDlidFltrCnt)
407 #define crp_rxdroppkt CREG_IDX(RxDroppedPktCnt)
408 #define crp_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt)
409 #define crp_rxqpinvalidctxt CREG_IDX(RxQPInvalidContextCnt)
410 #define crp_rxvlerr CREG_IDX(RxVlErrCnt)
411 #define crp_sendstall CREG_IDX(TxFlowStallCnt)
412 #define crp_txdroppedpkt CREG_IDX(TxDroppedPktCnt)
413 #define crp_txhdrerr CREG_IDX(TxHeadersErrCnt)
414 #define crp_txlenerr CREG_IDX(TxLenErrCnt)
415 #define crp_txminmaxlenerr CREG_IDX(TxMaxMinLenErrCnt)
416 #define crp_txsdmadesc CREG_IDX(TxSDmaDescCnt)
417 #define crp_txunderrun CREG_IDX(TxUnderrunCnt)
418 #define crp_txunsupvl CREG_IDX(TxUnsupVLErrCnt)
419 #define crp_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt)
420 #define crp_wordrcv CREG_IDX(RxDwordCnt)
421 #define crp_wordsend CREG_IDX(TxDwordCnt)
422 #define crp_tx_creditstalls CREG_IDX(TxCreditUpToDateTimeOut)
423 
424 /* these are the (few) counters that are not port-specific */
425 #define CREG_DEVIDX(regname) ((QIB_7322_##regname##_OFFS - \
426 			QIB_7322_LBIntCnt_OFFS) / sizeof(u64))
427 #define cr_base_egrovfl CREG_DEVIDX(RxP0HdrEgrOvflCnt)
428 #define cr_lbint CREG_DEVIDX(LBIntCnt)
429 #define cr_lbstall CREG_DEVIDX(LBFlowStallCnt)
430 #define cr_pcieretrydiag CREG_DEVIDX(PcieRetryBufDiagQwordCnt)
431 #define cr_rxtidflowdrop CREG_DEVIDX(RxTidFlowDropCnt)
432 #define cr_tidfull CREG_DEVIDX(RxTIDFullErrCnt)
433 #define cr_tidinvalid CREG_DEVIDX(RxTIDValidErrCnt)
434 
435 /* no chip register for # of IB ports supported, so define */
436 #define NUM_IB_PORTS 2
437 
438 /* 1 VL15 buffer per hardware IB port, no register for this, so define */
439 #define NUM_VL15_BUFS NUM_IB_PORTS
440 
441 /*
442  * context 0 and 1 are special, and there is no chip register that
443  * defines this value, so we have to define it here.
444  * These are all allocated to either 0 or 1 for single port
445  * hardware configuration, otherwise each gets half
446  */
447 #define KCTXT0_EGRCNT 2048
448 
449 /* values for vl and port fields in PBC, 7322-specific */
450 #define PBC_PORT_SEL_LSB 26
451 #define PBC_PORT_SEL_RMASK 1
452 #define PBC_VL_NUM_LSB 27
453 #define PBC_VL_NUM_RMASK 7
454 #define PBC_7322_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */
455 #define PBC_7322_VL15_SEND_CTRL (1ULL << 31) /* control version of same */
456 
457 static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = {
458 	[IB_RATE_2_5_GBPS] = 16,
459 	[IB_RATE_5_GBPS] = 8,
460 	[IB_RATE_10_GBPS] = 4,
461 	[IB_RATE_20_GBPS] = 2,
462 	[IB_RATE_30_GBPS] = 2,
463 	[IB_RATE_40_GBPS] = 1
464 };
465 
466 static const char * const qib_sdma_state_names[] = {
467 	[qib_sdma_state_s00_hw_down]          = "s00_HwDown",
468 	[qib_sdma_state_s10_hw_start_up_wait] = "s10_HwStartUpWait",
469 	[qib_sdma_state_s20_idle]             = "s20_Idle",
470 	[qib_sdma_state_s30_sw_clean_up_wait] = "s30_SwCleanUpWait",
471 	[qib_sdma_state_s40_hw_clean_up_wait] = "s40_HwCleanUpWait",
472 	[qib_sdma_state_s50_hw_halt_wait]     = "s50_HwHaltWait",
473 	[qib_sdma_state_s99_running]          = "s99_Running",
474 };
475 
476 #define IBA7322_LINKSPEED_SHIFT SYM_LSB(IBCStatusA_0, LinkSpeedActive)
477 #define IBA7322_LINKWIDTH_SHIFT SYM_LSB(IBCStatusA_0, LinkWidthActive)
478 
479 /* link training states, from IBC */
480 #define IB_7322_LT_STATE_DISABLED        0x00
481 #define IB_7322_LT_STATE_LINKUP          0x01
482 #define IB_7322_LT_STATE_POLLACTIVE      0x02
483 #define IB_7322_LT_STATE_POLLQUIET       0x03
484 #define IB_7322_LT_STATE_SLEEPDELAY      0x04
485 #define IB_7322_LT_STATE_SLEEPQUIET      0x05
486 #define IB_7322_LT_STATE_CFGDEBOUNCE     0x08
487 #define IB_7322_LT_STATE_CFGRCVFCFG      0x09
488 #define IB_7322_LT_STATE_CFGWAITRMT      0x0a
489 #define IB_7322_LT_STATE_CFGIDLE         0x0b
490 #define IB_7322_LT_STATE_RECOVERRETRAIN  0x0c
491 #define IB_7322_LT_STATE_TXREVLANES      0x0d
492 #define IB_7322_LT_STATE_RECOVERWAITRMT  0x0e
493 #define IB_7322_LT_STATE_RECOVERIDLE     0x0f
494 #define IB_7322_LT_STATE_CFGENH          0x10
495 #define IB_7322_LT_STATE_CFGTEST         0x11
496 #define IB_7322_LT_STATE_CFGWAITRMTTEST  0x12
497 #define IB_7322_LT_STATE_CFGWAITENH      0x13
498 
499 /* link state machine states from IBC */
500 #define IB_7322_L_STATE_DOWN             0x0
501 #define IB_7322_L_STATE_INIT             0x1
502 #define IB_7322_L_STATE_ARM              0x2
503 #define IB_7322_L_STATE_ACTIVE           0x3
504 #define IB_7322_L_STATE_ACT_DEFER        0x4
505 
506 static const u8 qib_7322_physportstate[0x20] = {
507 	[IB_7322_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
508 	[IB_7322_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
509 	[IB_7322_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
510 	[IB_7322_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
511 	[IB_7322_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
512 	[IB_7322_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
513 	[IB_7322_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN,
514 	[IB_7322_LT_STATE_CFGRCVFCFG] =
515 		IB_PHYSPORTSTATE_CFG_TRAIN,
516 	[IB_7322_LT_STATE_CFGWAITRMT] =
517 		IB_PHYSPORTSTATE_CFG_TRAIN,
518 	[IB_7322_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_IDLE,
519 	[IB_7322_LT_STATE_RECOVERRETRAIN] =
520 		IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
521 	[IB_7322_LT_STATE_RECOVERWAITRMT] =
522 		IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
523 	[IB_7322_LT_STATE_RECOVERIDLE] =
524 		IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
525 	[IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH,
526 	[IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN,
527 	[IB_7322_LT_STATE_CFGWAITRMTTEST] =
528 		IB_PHYSPORTSTATE_CFG_TRAIN,
529 	[IB_7322_LT_STATE_CFGWAITENH] =
530 		IB_PHYSPORTSTATE_CFG_WAIT_ENH,
531 	[0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
532 	[0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
533 	[0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
534 	[0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
535 };
536 
537 #ifdef CONFIG_INFINIBAND_QIB_DCA
538 struct qib_irq_notify {
539 	int rcv;
540 	void *arg;
541 	struct irq_affinity_notify notify;
542 };
543 #endif
544 
545 struct qib_chip_specific {
546 	u64 __iomem *cregbase;
547 	u64 *cntrs;
548 	spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */
549 	spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */
550 	u64 main_int_mask;      /* clear bits which have dedicated handlers */
551 	u64 int_enable_mask;  /* for per port interrupts in single port mode */
552 	u64 errormask;
553 	u64 hwerrmask;
554 	u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */
555 	u64 gpio_mask; /* shadow the gpio mask register */
556 	u64 extctrl; /* shadow the gpio output enable, etc... */
557 	u32 ncntrs;
558 	u32 nportcntrs;
559 	u32 cntrnamelen;
560 	u32 portcntrnamelen;
561 	u32 numctxts;
562 	u32 rcvegrcnt;
563 	u32 updthresh; /* current AvailUpdThld */
564 	u32 updthresh_dflt; /* default AvailUpdThld */
565 	u32 r1;
566 	u32 num_msix_entries;
567 	u32 sdmabufcnt;
568 	u32 lastbuf_for_pio;
569 	u32 stay_in_freeze;
570 	u32 recovery_ports_initted;
571 #ifdef CONFIG_INFINIBAND_QIB_DCA
572 	u32 dca_ctrl;
573 	int rhdr_cpu[18];
574 	int sdma_cpu[2];
575 	u64 dca_rcvhdr_ctrl[5]; /* B, C, D, E, F */
576 #endif
577 	struct qib_msix_entry *msix_entries;
578 	unsigned long *sendchkenable;
579 	unsigned long *sendgrhchk;
580 	unsigned long *sendibchk;
581 	u32 rcvavail_timeout[18];
582 	char emsgbuf[128]; /* for device error interrupt msg buffer */
583 };
584 
585 /* Table of entries in "human readable" form Tx Emphasis. */
586 struct txdds_ent {
587 	u8 amp;
588 	u8 pre;
589 	u8 main;
590 	u8 post;
591 };
592 
593 struct vendor_txdds_ent {
594 	u8 oui[QSFP_VOUI_LEN];
595 	u8 *partnum;
596 	struct txdds_ent sdr;
597 	struct txdds_ent ddr;
598 	struct txdds_ent qdr;
599 };
600 
601 static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *);
602 
603 #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */
604 #define TXDDS_EXTRA_SZ 18 /* number of extra tx settings entries */
605 #define TXDDS_MFG_SZ 2    /* number of mfg tx settings entries */
606 #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */
607 
608 #define H1_FORCE_VAL 8
609 #define H1_FORCE_QME 1 /*  may be overridden via setup_txselect() */
610 #define H1_FORCE_QMH 7 /*  may be overridden via setup_txselect() */
611 
612 /* The static and dynamic registers are paired, and the pairs indexed by spd */
613 #define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \
614 	+ ((spd) * 2))
615 
616 #define QDR_DFE_DISABLE_DELAY 4000 /* msec after LINKUP */
617 #define QDR_STATIC_ADAPT_DOWN 0xf0f0f0f0ULL /* link down, H1-H4 QDR adapts */
618 #define QDR_STATIC_ADAPT_DOWN_R1 0ULL /* r1 link down, H1-H4 QDR adapts */
619 #define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */
620 #define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */
621 
622 struct qib_chippport_specific {
623 	u64 __iomem *kpregbase;
624 	u64 __iomem *cpregbase;
625 	u64 *portcntrs;
626 	struct qib_pportdata *ppd;
627 	wait_queue_head_t autoneg_wait;
628 	struct delayed_work autoneg_work;
629 	struct delayed_work ipg_work;
630 	struct timer_list chase_timer;
631 	/*
632 	 * these 5 fields are used to establish deltas for IB symbol
633 	 * errors and linkrecovery errors.  They can be reported on
634 	 * some chips during link negotiation prior to INIT, and with
635 	 * DDR when faking DDR negotiations with non-IBTA switches.
636 	 * The chip counters are adjusted at driver unload if there is
637 	 * a non-zero delta.
638 	 */
639 	u64 ibdeltainprog;
640 	u64 ibsymdelta;
641 	u64 ibsymsnap;
642 	u64 iblnkerrdelta;
643 	u64 iblnkerrsnap;
644 	u64 iblnkdownsnap;
645 	u64 iblnkdowndelta;
646 	u64 ibmalfdelta;
647 	u64 ibmalfsnap;
648 	u64 ibcctrl_a; /* krp_ibcctrl_a shadow */
649 	u64 ibcctrl_b; /* krp_ibcctrl_b shadow */
650 	unsigned long qdr_dfe_time;
651 	unsigned long chase_end;
652 	u32 autoneg_tries;
653 	u32 recovery_init;
654 	u32 qdr_dfe_on;
655 	u32 qdr_reforce;
656 	/*
657 	 * Per-bay per-channel rcv QMH H1 values and Tx values for QDR.
658 	 * entry zero is unused, to simplify indexing
659 	 */
660 	u8 h1_val;
661 	u8 no_eep;  /* txselect table index to use if no qsfp info */
662 	u8 ipg_tries;
663 	u8 ibmalfusesnap;
664 	struct qib_qsfp_data qsfp_data;
665 	char epmsgbuf[192]; /* for port error interrupt msg buffer */
666 	char sdmamsgbuf[192]; /* for per-port sdma error messages */
667 };
668 
669 static struct {
670 	const char *name;
671 	irq_handler_t handler;
672 	int lsb;
673 	int port; /* 0 if not port-specific, else port # */
674 	int dca;
675 } irq_table[] = {
676 	{ "", qib_7322intr, -1, 0, 0 },
677 	{ " (buf avail)", qib_7322bufavail,
678 		SYM_LSB(IntStatus, SendBufAvail), 0, 0},
679 	{ " (sdma 0)", sdma_intr,
680 		SYM_LSB(IntStatus, SDmaInt_0), 1, 1 },
681 	{ " (sdma 1)", sdma_intr,
682 		SYM_LSB(IntStatus, SDmaInt_1), 2, 1 },
683 	{ " (sdmaI 0)", sdma_idle_intr,
684 		SYM_LSB(IntStatus, SDmaIdleInt_0), 1, 1},
685 	{ " (sdmaI 1)", sdma_idle_intr,
686 		SYM_LSB(IntStatus, SDmaIdleInt_1), 2, 1},
687 	{ " (sdmaP 0)", sdma_progress_intr,
688 		SYM_LSB(IntStatus, SDmaProgressInt_0), 1, 1 },
689 	{ " (sdmaP 1)", sdma_progress_intr,
690 		SYM_LSB(IntStatus, SDmaProgressInt_1), 2, 1 },
691 	{ " (sdmaC 0)", sdma_cleanup_intr,
692 		SYM_LSB(IntStatus, SDmaCleanupDone_0), 1, 0 },
693 	{ " (sdmaC 1)", sdma_cleanup_intr,
694 		SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 , 0},
695 };
696 
697 #ifdef CONFIG_INFINIBAND_QIB_DCA
698 
699 static const struct dca_reg_map {
700 	int     shadow_inx;
701 	int     lsb;
702 	u64     mask;
703 	u16     regno;
704 } dca_rcvhdr_reg_map[] = {
705 	{ 0, SYM_LSB(DCACtrlB, RcvHdrq0DCAOPH),
706 	   ~SYM_MASK(DCACtrlB, RcvHdrq0DCAOPH) , KREG_IDX(DCACtrlB) },
707 	{ 0, SYM_LSB(DCACtrlB, RcvHdrq1DCAOPH),
708 	   ~SYM_MASK(DCACtrlB, RcvHdrq1DCAOPH) , KREG_IDX(DCACtrlB) },
709 	{ 0, SYM_LSB(DCACtrlB, RcvHdrq2DCAOPH),
710 	   ~SYM_MASK(DCACtrlB, RcvHdrq2DCAOPH) , KREG_IDX(DCACtrlB) },
711 	{ 0, SYM_LSB(DCACtrlB, RcvHdrq3DCAOPH),
712 	   ~SYM_MASK(DCACtrlB, RcvHdrq3DCAOPH) , KREG_IDX(DCACtrlB) },
713 	{ 1, SYM_LSB(DCACtrlC, RcvHdrq4DCAOPH),
714 	   ~SYM_MASK(DCACtrlC, RcvHdrq4DCAOPH) , KREG_IDX(DCACtrlC) },
715 	{ 1, SYM_LSB(DCACtrlC, RcvHdrq5DCAOPH),
716 	   ~SYM_MASK(DCACtrlC, RcvHdrq5DCAOPH) , KREG_IDX(DCACtrlC) },
717 	{ 1, SYM_LSB(DCACtrlC, RcvHdrq6DCAOPH),
718 	   ~SYM_MASK(DCACtrlC, RcvHdrq6DCAOPH) , KREG_IDX(DCACtrlC) },
719 	{ 1, SYM_LSB(DCACtrlC, RcvHdrq7DCAOPH),
720 	   ~SYM_MASK(DCACtrlC, RcvHdrq7DCAOPH) , KREG_IDX(DCACtrlC) },
721 	{ 2, SYM_LSB(DCACtrlD, RcvHdrq8DCAOPH),
722 	   ~SYM_MASK(DCACtrlD, RcvHdrq8DCAOPH) , KREG_IDX(DCACtrlD) },
723 	{ 2, SYM_LSB(DCACtrlD, RcvHdrq9DCAOPH),
724 	   ~SYM_MASK(DCACtrlD, RcvHdrq9DCAOPH) , KREG_IDX(DCACtrlD) },
725 	{ 2, SYM_LSB(DCACtrlD, RcvHdrq10DCAOPH),
726 	   ~SYM_MASK(DCACtrlD, RcvHdrq10DCAOPH) , KREG_IDX(DCACtrlD) },
727 	{ 2, SYM_LSB(DCACtrlD, RcvHdrq11DCAOPH),
728 	   ~SYM_MASK(DCACtrlD, RcvHdrq11DCAOPH) , KREG_IDX(DCACtrlD) },
729 	{ 3, SYM_LSB(DCACtrlE, RcvHdrq12DCAOPH),
730 	   ~SYM_MASK(DCACtrlE, RcvHdrq12DCAOPH) , KREG_IDX(DCACtrlE) },
731 	{ 3, SYM_LSB(DCACtrlE, RcvHdrq13DCAOPH),
732 	   ~SYM_MASK(DCACtrlE, RcvHdrq13DCAOPH) , KREG_IDX(DCACtrlE) },
733 	{ 3, SYM_LSB(DCACtrlE, RcvHdrq14DCAOPH),
734 	   ~SYM_MASK(DCACtrlE, RcvHdrq14DCAOPH) , KREG_IDX(DCACtrlE) },
735 	{ 3, SYM_LSB(DCACtrlE, RcvHdrq15DCAOPH),
736 	   ~SYM_MASK(DCACtrlE, RcvHdrq15DCAOPH) , KREG_IDX(DCACtrlE) },
737 	{ 4, SYM_LSB(DCACtrlF, RcvHdrq16DCAOPH),
738 	   ~SYM_MASK(DCACtrlF, RcvHdrq16DCAOPH) , KREG_IDX(DCACtrlF) },
739 	{ 4, SYM_LSB(DCACtrlF, RcvHdrq17DCAOPH),
740 	   ~SYM_MASK(DCACtrlF, RcvHdrq17DCAOPH) , KREG_IDX(DCACtrlF) },
741 };
742 #endif
743 
744 /* ibcctrl bits */
745 #define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1
746 /* cycle through TS1/TS2 till OK */
747 #define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2
748 /* wait for TS1, then go on */
749 #define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3
750 #define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16
751 
752 #define QLOGIC_IB_IBCC_LINKCMD_DOWN 1           /* move to 0x11 */
753 #define QLOGIC_IB_IBCC_LINKCMD_ARMED 2          /* move to 0x21 */
754 #define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
755 
756 #define BLOB_7322_IBCHG 0x101
757 
758 static inline void qib_write_kreg(const struct qib_devdata *dd,
759 				  const u32 regno, u64 value);
760 static inline u32 qib_read_kreg32(const struct qib_devdata *, const u32);
761 static void write_7322_initregs(struct qib_devdata *);
762 static void write_7322_init_portregs(struct qib_pportdata *);
763 static void setup_7322_link_recovery(struct qib_pportdata *, u32);
764 static void check_7322_rxe_status(struct qib_pportdata *);
765 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *);
766 #ifdef CONFIG_INFINIBAND_QIB_DCA
767 static void qib_setup_dca(struct qib_devdata *dd);
768 static void setup_dca_notifier(struct qib_devdata *dd, int msixnum);
769 static void reset_dca_notifier(struct qib_devdata *dd, int msixnum);
770 #endif
771 
772 /**
773  * qib_read_ureg32 - read 32-bit virtualized per-context register
774  * @dd: device
775  * @regno: register number
776  * @ctxt: context number
777  *
778  * Return the contents of a register that is virtualized to be per context.
779  * Returns -1 on errors (not distinguishable from valid contents at
780  * runtime; we may add a separate error variable at some point).
781  */
782 static inline u32 qib_read_ureg32(const struct qib_devdata *dd,
783 				  enum qib_ureg regno, int ctxt)
784 {
785 	if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
786 		return 0;
787 	return readl(regno + (u64 __iomem *)(
788 		(dd->ureg_align * ctxt) + (dd->userbase ?
789 		 (char __iomem *)dd->userbase :
790 		 (char __iomem *)dd->kregbase + dd->uregbase)));
791 }
792 
793 /**
794  * qib_write_ureg - write virtualized per-context register
795  * @dd: device
796  * @regno: register number
797  * @value: value
798  * @ctxt: context
799  *
800  * Write the contents of a register that is virtualized to be per context.
801  */
802 static inline void qib_write_ureg(const struct qib_devdata *dd,
803 				  enum qib_ureg regno, u64 value, int ctxt)
804 {
805 	u64 __iomem *ubase;
806 
807 	if (dd->userbase)
808 		ubase = (u64 __iomem *)
809 			((char __iomem *) dd->userbase +
810 			 dd->ureg_align * ctxt);
811 	else
812 		ubase = (u64 __iomem *)
813 			(dd->uregbase +
814 			 (char __iomem *) dd->kregbase +
815 			 dd->ureg_align * ctxt);
816 
817 	if (dd->kregbase && (dd->flags & QIB_PRESENT))
818 		writeq(value, &ubase[regno]);
819 }
820 
821 static inline u32 qib_read_kreg32(const struct qib_devdata *dd,
822 				  const u32 regno)
823 {
824 	if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
825 		return -1;
826 	return readl((u32 __iomem *) &dd->kregbase[regno]);
827 }
828 
829 static inline u64 qib_read_kreg64(const struct qib_devdata *dd,
830 				  const u32 regno)
831 {
832 	if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
833 		return -1;
834 	return readq(&dd->kregbase[regno]);
835 }
836 
837 static inline void qib_write_kreg(const struct qib_devdata *dd,
838 				  const u32 regno, u64 value)
839 {
840 	if (dd->kregbase && (dd->flags & QIB_PRESENT))
841 		writeq(value, &dd->kregbase[regno]);
842 }
843 
844 /*
845  * not many sanity checks for the port-specific kernel register routines,
846  * since they are only used when it's known to be safe.
847 */
848 static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd,
849 				     const u16 regno)
850 {
851 	if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT))
852 		return 0ULL;
853 	return readq(&ppd->cpspec->kpregbase[regno]);
854 }
855 
856 static inline void qib_write_kreg_port(const struct qib_pportdata *ppd,
857 				       const u16 regno, u64 value)
858 {
859 	if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase &&
860 	    (ppd->dd->flags & QIB_PRESENT))
861 		writeq(value, &ppd->cpspec->kpregbase[regno]);
862 }
863 
864 /**
865  * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register
866  * @dd: the qlogic_ib device
867  * @regno: the register number to write
868  * @ctxt: the context containing the register
869  * @value: the value to write
870  */
871 static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd,
872 				       const u16 regno, unsigned ctxt,
873 				       u64 value)
874 {
875 	qib_write_kreg(dd, regno + ctxt, value);
876 }
877 
878 static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno)
879 {
880 	if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
881 		return 0;
882 	return readq(&dd->cspec->cregbase[regno]);
883 
884 
885 }
886 
887 static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno)
888 {
889 	if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
890 		return 0;
891 	return readl(&dd->cspec->cregbase[regno]);
892 
893 
894 }
895 
896 static inline void write_7322_creg_port(const struct qib_pportdata *ppd,
897 					u16 regno, u64 value)
898 {
899 	if (ppd->cpspec && ppd->cpspec->cpregbase &&
900 	    (ppd->dd->flags & QIB_PRESENT))
901 		writeq(value, &ppd->cpspec->cpregbase[regno]);
902 }
903 
904 static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd,
905 				      u16 regno)
906 {
907 	if (!ppd->cpspec || !ppd->cpspec->cpregbase ||
908 	    !(ppd->dd->flags & QIB_PRESENT))
909 		return 0;
910 	return readq(&ppd->cpspec->cpregbase[regno]);
911 }
912 
913 static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd,
914 					u16 regno)
915 {
916 	if (!ppd->cpspec || !ppd->cpspec->cpregbase ||
917 	    !(ppd->dd->flags & QIB_PRESENT))
918 		return 0;
919 	return readl(&ppd->cpspec->cpregbase[regno]);
920 }
921 
922 /* bits in Control register */
923 #define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset)
924 #define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn)
925 
926 /* bits in general interrupt regs */
927 #define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask)
928 #define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17)
929 #define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB)
930 #define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask)
931 #define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17)
932 #define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB)
933 #define QIB_I_C_ERROR INT_MASK(Err)
934 
935 #define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1))
936 #define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail)
937 #define QIB_I_GPIO INT_MASK(AssertGPIO)
938 #define QIB_I_P_SDMAINT(pidx) \
939 	(INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \
940 	 INT_MASK_P(SDmaProgress, pidx) | \
941 	 INT_MASK_PM(SDmaCleanupDone, pidx))
942 
943 /* Interrupt bits that are "per port" */
944 #define QIB_I_P_BITSEXTANT(pidx) \
945 	(INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \
946 	INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \
947 	INT_MASK_P(SDmaProgress, pidx) | \
948 	INT_MASK_PM(SDmaCleanupDone, pidx))
949 
950 /* Interrupt bits that are common to a device */
951 /* currently unused: QIB_I_SPIOSENT */
952 #define QIB_I_C_BITSEXTANT \
953 	(QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \
954 	QIB_I_SPIOSENT | \
955 	QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO)
956 
957 #define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \
958 	QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1))
959 
960 /*
961  * Error bits that are "per port".
962  */
963 #define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged)
964 #define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr)
965 #define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr)
966 #define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr)
967 #define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr)
968 #define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr)
969 #define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr)
970 #define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr)
971 #define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr)
972 #define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr)
973 #define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr)
974 #define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr)
975 #define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr)
976 #define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr)
977 #define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr)
978 #define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr)
979 #define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr)
980 #define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr)
981 #define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr)
982 #define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr)
983 #define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr)
984 #define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr)
985 #define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr)
986 #define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr)
987 #define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr)
988 #define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr)
989 #define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr)
990 #define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr)
991 
992 #define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr)
993 #define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr)
994 #define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr)
995 #define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr)
996 #define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr)
997 #define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr)
998 #define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr)
999 #define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr)
1000 #define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr)
1001 #define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr)
1002 #define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr)
1003 
1004 /* Error bits that are common to a device */
1005 #define QIB_E_RESET ERR_MASK(ResetNegated)
1006 #define QIB_E_HARDWARE ERR_MASK(HardwareErr)
1007 #define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr)
1008 
1009 
1010 /*
1011  * Per chip (rather than per-port) errors.  Most either do
1012  * nothing but trigger a print (because they self-recover, or
1013  * always occur in tandem with other errors that handle the
1014  * issue), or because they indicate errors with no recovery,
1015  * but we want to know that they happened.
1016  */
1017 #define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr)
1018 #define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd)
1019 #define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr)
1020 #define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr)
1021 #define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr)
1022 #define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr)
1023 #define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr)
1024 #define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr)
1025 
1026 /* SDMA chip errors (not per port)
1027  * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get
1028  * the SDMAHALT error immediately, so we just print the dup error via the
1029  * E_AUTO mechanism.  This is true of most of the per-port fatal errors
1030  * as well, but since this is port-independent, by definition, it's
1031  * handled a bit differently.  SDMA_VL15 and SDMA_WRONG_PORT are per
1032  * packet send errors, and so are handled in the same manner as other
1033  * per-packet errors.
1034  */
1035 #define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err)
1036 #define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr)
1037 #define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr)
1038 
1039 /*
1040  * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS
1041  * it is used to print "common" packet errors.
1042  */
1043 #define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\
1044 	QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\
1045 	QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\
1046 	QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \
1047 	QIB_E_P_REBP)
1048 
1049 /* Error Bits that Packet-related (Receive, per-port) */
1050 #define QIB_E_P_RPKTERRS (\
1051 	QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \
1052 	QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \
1053 	QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\
1054 	QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \
1055 	QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \
1056 	QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP)
1057 
1058 /*
1059  * Error bits that are Send-related (per port)
1060  * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling).
1061  * All of these potentially need to have a buffer disarmed
1062  */
1063 #define QIB_E_P_SPKTERRS (\
1064 	QIB_E_P_SUNEXP_PKTNUM |\
1065 	QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\
1066 	QIB_E_P_SMAXPKTLEN |\
1067 	QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \
1068 	QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \
1069 	QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL)
1070 
1071 #define QIB_E_SPKTERRS ( \
1072 		QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \
1073 		ERR_MASK_N(SendUnsupportedVLErr) |			\
1074 		QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT)
1075 
1076 #define QIB_E_P_SDMAERRS ( \
1077 	QIB_E_P_SDMAHALT | \
1078 	QIB_E_P_SDMADESCADDRMISALIGN | \
1079 	QIB_E_P_SDMAUNEXPDATA | \
1080 	QIB_E_P_SDMAMISSINGDW | \
1081 	QIB_E_P_SDMADWEN | \
1082 	QIB_E_P_SDMARPYTAG | \
1083 	QIB_E_P_SDMA1STDESC | \
1084 	QIB_E_P_SDMABASE | \
1085 	QIB_E_P_SDMATAILOUTOFBOUND | \
1086 	QIB_E_P_SDMAOUTOFBOUND | \
1087 	QIB_E_P_SDMAGENMISMATCH)
1088 
1089 /*
1090  * This sets some bits more than once, but makes it more obvious which
1091  * bits are not handled under other categories, and the repeat definition
1092  * is not a problem.
1093  */
1094 #define QIB_E_P_BITSEXTANT ( \
1095 	QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \
1096 	QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \
1097 	QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \
1098 	QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \
1099 	)
1100 
1101 /*
1102  * These are errors that can occur when the link
1103  * changes state while a packet is being sent or received.  This doesn't
1104  * cover things like EBP or VCRC that can be the result of a sending
1105  * having the link change state, so we receive a "known bad" packet.
1106  * All of these are "per port", so renamed:
1107  */
1108 #define QIB_E_P_LINK_PKTERRS (\
1109 	QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\
1110 	QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\
1111 	QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\
1112 	QIB_E_P_RUNEXPCHAR)
1113 
1114 /*
1115  * This sets some bits more than once, but makes it more obvious which
1116  * bits are not handled under other categories (such as QIB_E_SPKTERRS),
1117  * and the repeat definition is not a problem.
1118  */
1119 #define QIB_E_C_BITSEXTANT (\
1120 	QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\
1121 	QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\
1122 	QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE)
1123 
1124 /* Likewise Neuter E_SPKT_ERRS_IGNORE */
1125 #define E_SPKT_ERRS_IGNORE 0
1126 
1127 #define QIB_EXTS_MEMBIST_DISABLED \
1128 	SYM_MASK(EXTStatus, MemBISTDisabled)
1129 #define QIB_EXTS_MEMBIST_ENDTEST \
1130 	SYM_MASK(EXTStatus, MemBISTEndTest)
1131 
1132 #define QIB_E_SPIOARMLAUNCH \
1133 	ERR_MASK(SendArmLaunchErr)
1134 
1135 #define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd)
1136 #define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd)
1137 
1138 /*
1139  * IBTA_1_2 is set when multiple speeds are enabled (normal),
1140  * and also if forced QDR (only QDR enabled).  It's enabled for the
1141  * forced QDR case so that scrambling will be enabled by the TS3
1142  * exchange, when supported by both sides of the link.
1143  */
1144 #define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE)
1145 #define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED)
1146 #define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)
1147 #define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR)
1148 #define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR)
1149 #define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \
1150 	SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR))
1151 #define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR)
1152 
1153 #define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod)
1154 #define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod)
1155 
1156 #define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS)
1157 #define IBA7322_IBC_WIDTH_4X_ONLY (1<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS))
1158 #define IBA7322_IBC_WIDTH_1X_ONLY (0<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS))
1159 
1160 #define IBA7322_IBC_RXPOL_MASK SYM_MASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP)
1161 #define IBA7322_IBC_RXPOL_LSB SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP)
1162 #define IBA7322_IBC_HRTBT_MASK (SYM_MASK(IBCCtrlB_0, HRTBT_AUTO) | \
1163 	SYM_MASK(IBCCtrlB_0, HRTBT_ENB))
1164 #define IBA7322_IBC_HRTBT_RMASK (IBA7322_IBC_HRTBT_MASK >> \
1165 	SYM_LSB(IBCCtrlB_0, HRTBT_ENB))
1166 #define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB)
1167 
1168 #define IBA7322_REDIRECT_VEC_PER_REG 12
1169 
1170 #define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En)
1171 #define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En)
1172 #define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En)
1173 #define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En)
1174 #define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En)
1175 
1176 #define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */
1177 
1178 #define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \
1179 	.msg = #fldname , .sz = sizeof(#fldname) }
1180 #define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \
1181 	fldname##Mask##_##port), .msg = #fldname , .sz = sizeof(#fldname) }
1182 static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = {
1183 	HWE_AUTO_P(IBSerdesPClkNotDetect, 1),
1184 	HWE_AUTO_P(IBSerdesPClkNotDetect, 0),
1185 	HWE_AUTO(PCIESerdesPClkNotDetect),
1186 	HWE_AUTO(PowerOnBISTFailed),
1187 	HWE_AUTO(TempsenseTholdReached),
1188 	HWE_AUTO(MemoryErr),
1189 	HWE_AUTO(PCIeBusParityErr),
1190 	HWE_AUTO(PcieCplTimeout),
1191 	HWE_AUTO(PciePoisonedTLP),
1192 	HWE_AUTO_P(SDmaMemReadErr, 1),
1193 	HWE_AUTO_P(SDmaMemReadErr, 0),
1194 	HWE_AUTO_P(IBCBusFromSPCParityErr, 1),
1195 	HWE_AUTO_P(IBCBusToSPCParityErr, 1),
1196 	HWE_AUTO_P(IBCBusFromSPCParityErr, 0),
1197 	HWE_AUTO(statusValidNoEop),
1198 	HWE_AUTO(LATriggered),
1199 	{ .mask = 0, .sz = 0 }
1200 };
1201 
1202 #define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \
1203 	.msg = #fldname, .sz = sizeof(#fldname) }
1204 #define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \
1205 	.msg = #fldname, .sz = sizeof(#fldname) }
1206 static const struct qib_hwerror_msgs qib_7322error_msgs[] = {
1207 	E_AUTO(RcvEgrFullErr),
1208 	E_AUTO(RcvHdrFullErr),
1209 	E_AUTO(ResetNegated),
1210 	E_AUTO(HardwareErr),
1211 	E_AUTO(InvalidAddrErr),
1212 	E_AUTO(SDmaVL15Err),
1213 	E_AUTO(SBufVL15MisUseErr),
1214 	E_AUTO(InvalidEEPCmd),
1215 	E_AUTO(RcvContextShareErr),
1216 	E_AUTO(SendVLMismatchErr),
1217 	E_AUTO(SendArmLaunchErr),
1218 	E_AUTO(SendSpecialTriggerErr),
1219 	E_AUTO(SDmaWrongPortErr),
1220 	E_AUTO(SDmaBufMaskDuplicateErr),
1221 	{ .mask = 0, .sz = 0 }
1222 };
1223 
1224 static const struct  qib_hwerror_msgs qib_7322p_error_msgs[] = {
1225 	E_P_AUTO(IBStatusChanged),
1226 	E_P_AUTO(SHeadersErr),
1227 	E_P_AUTO(VL15BufMisuseErr),
1228 	/*
1229 	 * SDmaHaltErr is not really an error, make it clearer;
1230 	 */
1231 	{.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted",
1232 		.sz = 11},
1233 	E_P_AUTO(SDmaDescAddrMisalignErr),
1234 	E_P_AUTO(SDmaUnexpDataErr),
1235 	E_P_AUTO(SDmaMissingDwErr),
1236 	E_P_AUTO(SDmaDwEnErr),
1237 	E_P_AUTO(SDmaRpyTagErr),
1238 	E_P_AUTO(SDma1stDescErr),
1239 	E_P_AUTO(SDmaBaseErr),
1240 	E_P_AUTO(SDmaTailOutOfBoundErr),
1241 	E_P_AUTO(SDmaOutOfBoundErr),
1242 	E_P_AUTO(SDmaGenMismatchErr),
1243 	E_P_AUTO(SendBufMisuseErr),
1244 	E_P_AUTO(SendUnsupportedVLErr),
1245 	E_P_AUTO(SendUnexpectedPktNumErr),
1246 	E_P_AUTO(SendDroppedDataPktErr),
1247 	E_P_AUTO(SendDroppedSmpPktErr),
1248 	E_P_AUTO(SendPktLenErr),
1249 	E_P_AUTO(SendUnderRunErr),
1250 	E_P_AUTO(SendMaxPktLenErr),
1251 	E_P_AUTO(SendMinPktLenErr),
1252 	E_P_AUTO(RcvIBLostLinkErr),
1253 	E_P_AUTO(RcvHdrErr),
1254 	E_P_AUTO(RcvHdrLenErr),
1255 	E_P_AUTO(RcvBadTidErr),
1256 	E_P_AUTO(RcvBadVersionErr),
1257 	E_P_AUTO(RcvIBFlowErr),
1258 	E_P_AUTO(RcvEBPErr),
1259 	E_P_AUTO(RcvUnsupportedVLErr),
1260 	E_P_AUTO(RcvUnexpectedCharErr),
1261 	E_P_AUTO(RcvShortPktLenErr),
1262 	E_P_AUTO(RcvLongPktLenErr),
1263 	E_P_AUTO(RcvMaxPktLenErr),
1264 	E_P_AUTO(RcvMinPktLenErr),
1265 	E_P_AUTO(RcvICRCErr),
1266 	E_P_AUTO(RcvVCRCErr),
1267 	E_P_AUTO(RcvFormatErr),
1268 	{ .mask = 0, .sz = 0 }
1269 };
1270 
1271 /*
1272  * Below generates "auto-message" for interrupts not specific to any port or
1273  * context
1274  */
1275 #define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \
1276 	.msg = #fldname, .sz = sizeof(#fldname) }
1277 /* Below generates "auto-message" for interrupts specific to a port */
1278 #define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\
1279 	SYM_LSB(IntMask, fldname##Mask##_0), \
1280 	SYM_LSB(IntMask, fldname##Mask##_1)), \
1281 	.msg = #fldname "_P", .sz = sizeof(#fldname "_P") }
1282 /* For some reason, the SerDesTrimDone bits are reversed */
1283 #define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\
1284 	SYM_LSB(IntMask, fldname##Mask##_1), \
1285 	SYM_LSB(IntMask, fldname##Mask##_0)), \
1286 	.msg = #fldname "_P", .sz = sizeof(#fldname "_P") }
1287 /*
1288  * Below generates "auto-message" for interrupts specific to a context,
1289  * with ctxt-number appended
1290  */
1291 #define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\
1292 	SYM_LSB(IntMask, fldname##0IntMask), \
1293 	SYM_LSB(IntMask, fldname##17IntMask)), \
1294 	.msg = #fldname "_C", .sz = sizeof(#fldname "_C") }
1295 
1296 #define TXSYMPTOM_AUTO_P(fldname) \
1297 	{ .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), \
1298 	.msg = #fldname, .sz = sizeof(#fldname) }
1299 static const struct  qib_hwerror_msgs hdrchk_msgs[] = {
1300 	TXSYMPTOM_AUTO_P(NonKeyPacket),
1301 	TXSYMPTOM_AUTO_P(GRHFail),
1302 	TXSYMPTOM_AUTO_P(PkeyFail),
1303 	TXSYMPTOM_AUTO_P(QPFail),
1304 	TXSYMPTOM_AUTO_P(SLIDFail),
1305 	TXSYMPTOM_AUTO_P(RawIPV6),
1306 	TXSYMPTOM_AUTO_P(PacketTooSmall),
1307 	{ .mask = 0, .sz = 0 }
1308 };
1309 
1310 #define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */
1311 
1312 /*
1313  * Called when we might have an error that is specific to a particular
1314  * PIO buffer, and may need to cancel that buffer, so it can be re-used,
1315  * because we don't need to force the update of pioavail
1316  */
1317 static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd)
1318 {
1319 	struct qib_devdata *dd = ppd->dd;
1320 	u32 i;
1321 	int any;
1322 	u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS;
1323 	u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG;
1324 	unsigned long sbuf[4];
1325 
1326 	/*
1327 	 * It's possible that sendbuffererror could have bits set; might
1328 	 * have already done this as a result of hardware error handling.
1329 	 */
1330 	any = 0;
1331 	for (i = 0; i < regcnt; ++i) {
1332 		sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i);
1333 		if (sbuf[i]) {
1334 			any = 1;
1335 			qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]);
1336 		}
1337 	}
1338 
1339 	if (any)
1340 		qib_disarm_piobufs_set(dd, sbuf, piobcnt);
1341 }
1342 
1343 /* No txe_recover yet, if ever */
1344 
1345 /* No decode__errors yet */
1346 static void err_decode(char *msg, size_t len, u64 errs,
1347 		       const struct qib_hwerror_msgs *msp)
1348 {
1349 	u64 these, lmask;
1350 	int took, multi, n = 0;
1351 
1352 	while (errs && msp && msp->mask) {
1353 		multi = (msp->mask & (msp->mask - 1));
1354 		while (errs & msp->mask) {
1355 			these = (errs & msp->mask);
1356 			lmask = (these & (these - 1)) ^ these;
1357 			if (len) {
1358 				if (n++) {
1359 					/* separate the strings */
1360 					*msg++ = ',';
1361 					len--;
1362 				}
1363 				/* msp->sz counts the nul */
1364 				took = min_t(size_t, msp->sz - (size_t)1, len);
1365 				memcpy(msg,  msp->msg, took);
1366 				len -= took;
1367 				msg += took;
1368 				if (len)
1369 					*msg = '\0';
1370 			}
1371 			errs &= ~lmask;
1372 			if (len && multi) {
1373 				/* More than one bit this mask */
1374 				int idx = -1;
1375 
1376 				while (lmask & msp->mask) {
1377 					++idx;
1378 					lmask >>= 1;
1379 				}
1380 				took = scnprintf(msg, len, "_%d", idx);
1381 				len -= took;
1382 				msg += took;
1383 			}
1384 		}
1385 		++msp;
1386 	}
1387 	/* If some bits are left, show in hex. */
1388 	if (len && errs)
1389 		snprintf(msg, len, "%sMORE:%llX", n ? "," : "",
1390 			(unsigned long long) errs);
1391 }
1392 
1393 /* only called if r1 set */
1394 static void flush_fifo(struct qib_pportdata *ppd)
1395 {
1396 	struct qib_devdata *dd = ppd->dd;
1397 	u32 __iomem *piobuf;
1398 	u32 bufn;
1399 	u32 *hdr;
1400 	u64 pbc;
1401 	const unsigned hdrwords = 7;
1402 	static struct ib_header ibhdr = {
1403 		.lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH),
1404 		.lrh[1] = IB_LID_PERMISSIVE,
1405 		.lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC),
1406 		.lrh[3] = IB_LID_PERMISSIVE,
1407 		.u.oth.bth[0] = cpu_to_be32(
1408 			(IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY),
1409 		.u.oth.bth[1] = cpu_to_be32(0),
1410 		.u.oth.bth[2] = cpu_to_be32(0),
1411 		.u.oth.u.ud.deth[0] = cpu_to_be32(0),
1412 		.u.oth.u.ud.deth[1] = cpu_to_be32(0),
1413 	};
1414 
1415 	/*
1416 	 * Send a dummy VL15 packet to flush the launch FIFO.
1417 	 * This will not actually be sent since the TxeBypassIbc bit is set.
1418 	 */
1419 	pbc = PBC_7322_VL15_SEND |
1420 		(((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) |
1421 		(hdrwords + SIZE_OF_CRC);
1422 	piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn);
1423 	if (!piobuf)
1424 		return;
1425 	writeq(pbc, piobuf);
1426 	hdr = (u32 *) &ibhdr;
1427 	if (dd->flags & QIB_PIO_FLUSH_WC) {
1428 		qib_flush_wc();
1429 		qib_pio_copy(piobuf + 2, hdr, hdrwords - 1);
1430 		qib_flush_wc();
1431 		__raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1);
1432 		qib_flush_wc();
1433 	} else
1434 		qib_pio_copy(piobuf + 2, hdr, hdrwords);
1435 	qib_sendbuf_done(dd, bufn);
1436 }
1437 
1438 /*
1439  * This is called with interrupts disabled and sdma_lock held.
1440  */
1441 static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op)
1442 {
1443 	struct qib_devdata *dd = ppd->dd;
1444 	u64 set_sendctrl = 0;
1445 	u64 clr_sendctrl = 0;
1446 
1447 	if (op & QIB_SDMA_SENDCTRL_OP_ENABLE)
1448 		set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable);
1449 	else
1450 		clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable);
1451 
1452 	if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE)
1453 		set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable);
1454 	else
1455 		clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable);
1456 
1457 	if (op & QIB_SDMA_SENDCTRL_OP_HALT)
1458 		set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt);
1459 	else
1460 		clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt);
1461 
1462 	if (op & QIB_SDMA_SENDCTRL_OP_DRAIN)
1463 		set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) |
1464 				SYM_MASK(SendCtrl_0, TxeAbortIbc) |
1465 				SYM_MASK(SendCtrl_0, TxeDrainRmFifo);
1466 	else
1467 		clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) |
1468 				SYM_MASK(SendCtrl_0, TxeAbortIbc) |
1469 				SYM_MASK(SendCtrl_0, TxeDrainRmFifo);
1470 
1471 	spin_lock(&dd->sendctrl_lock);
1472 
1473 	/* If we are draining everything, block sends first */
1474 	if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) {
1475 		ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable);
1476 		qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
1477 		qib_write_kreg(dd, kr_scratch, 0);
1478 	}
1479 
1480 	ppd->p_sendctrl |= set_sendctrl;
1481 	ppd->p_sendctrl &= ~clr_sendctrl;
1482 
1483 	if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP)
1484 		qib_write_kreg_port(ppd, krp_sendctrl,
1485 				    ppd->p_sendctrl |
1486 				    SYM_MASK(SendCtrl_0, SDmaCleanup));
1487 	else
1488 		qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
1489 	qib_write_kreg(dd, kr_scratch, 0);
1490 
1491 	if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) {
1492 		ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable);
1493 		qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
1494 		qib_write_kreg(dd, kr_scratch, 0);
1495 	}
1496 
1497 	spin_unlock(&dd->sendctrl_lock);
1498 
1499 	if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1)
1500 		flush_fifo(ppd);
1501 }
1502 
1503 static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd)
1504 {
1505 	__qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned);
1506 }
1507 
1508 static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd)
1509 {
1510 	/*
1511 	 * Set SendDmaLenGen and clear and set
1512 	 * the MSB of the generation count to enable generation checking
1513 	 * and load the internal generation counter.
1514 	 */
1515 	qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt);
1516 	qib_write_kreg_port(ppd, krp_senddmalengen,
1517 			    ppd->sdma_descq_cnt |
1518 			    (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB));
1519 }
1520 
1521 /*
1522  * Must be called with sdma_lock held, or before init finished.
1523  */
1524 static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail)
1525 {
1526 	/* Commit writes to memory and advance the tail on the chip */
1527 	wmb();
1528 	ppd->sdma_descq_tail = tail;
1529 	qib_write_kreg_port(ppd, krp_senddmatail, tail);
1530 }
1531 
1532 /*
1533  * This is called with interrupts disabled and sdma_lock held.
1534  */
1535 static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd)
1536 {
1537 	/*
1538 	 * Drain all FIFOs.
1539 	 * The hardware doesn't require this but we do it so that verbs
1540 	 * and user applications don't wait for link active to send stale
1541 	 * data.
1542 	 */
1543 	sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH);
1544 
1545 	qib_sdma_7322_setlengen(ppd);
1546 	qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */
1547 	ppd->sdma_head_dma[0] = 0;
1548 	qib_7322_sdma_sendctrl(ppd,
1549 		ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP);
1550 }
1551 
1552 #define DISABLES_SDMA ( \
1553 	QIB_E_P_SDMAHALT | \
1554 	QIB_E_P_SDMADESCADDRMISALIGN | \
1555 	QIB_E_P_SDMAMISSINGDW | \
1556 	QIB_E_P_SDMADWEN | \
1557 	QIB_E_P_SDMARPYTAG | \
1558 	QIB_E_P_SDMA1STDESC | \
1559 	QIB_E_P_SDMABASE | \
1560 	QIB_E_P_SDMATAILOUTOFBOUND | \
1561 	QIB_E_P_SDMAOUTOFBOUND | \
1562 	QIB_E_P_SDMAGENMISMATCH)
1563 
1564 static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs)
1565 {
1566 	unsigned long flags;
1567 	struct qib_devdata *dd = ppd->dd;
1568 
1569 	errs &= QIB_E_P_SDMAERRS;
1570 	err_decode(ppd->cpspec->sdmamsgbuf, sizeof(ppd->cpspec->sdmamsgbuf),
1571 		   errs, qib_7322p_error_msgs);
1572 
1573 	if (errs & QIB_E_P_SDMAUNEXPDATA)
1574 		qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit,
1575 			    ppd->port);
1576 
1577 	spin_lock_irqsave(&ppd->sdma_lock, flags);
1578 
1579 	if (errs != QIB_E_P_SDMAHALT) {
1580 		/* SDMA errors have QIB_E_P_SDMAHALT and another bit set */
1581 		qib_dev_porterr(dd, ppd->port,
1582 			"SDMA %s 0x%016llx %s\n",
1583 			qib_sdma_state_names[ppd->sdma_state.current_state],
1584 			errs, ppd->cpspec->sdmamsgbuf);
1585 		dump_sdma_7322_state(ppd);
1586 	}
1587 
1588 	switch (ppd->sdma_state.current_state) {
1589 	case qib_sdma_state_s00_hw_down:
1590 		break;
1591 
1592 	case qib_sdma_state_s10_hw_start_up_wait:
1593 		if (errs & QIB_E_P_SDMAHALT)
1594 			__qib_sdma_process_event(ppd,
1595 				qib_sdma_event_e20_hw_started);
1596 		break;
1597 
1598 	case qib_sdma_state_s20_idle:
1599 		break;
1600 
1601 	case qib_sdma_state_s30_sw_clean_up_wait:
1602 		break;
1603 
1604 	case qib_sdma_state_s40_hw_clean_up_wait:
1605 		if (errs & QIB_E_P_SDMAHALT)
1606 			__qib_sdma_process_event(ppd,
1607 				qib_sdma_event_e50_hw_cleaned);
1608 		break;
1609 
1610 	case qib_sdma_state_s50_hw_halt_wait:
1611 		if (errs & QIB_E_P_SDMAHALT)
1612 			__qib_sdma_process_event(ppd,
1613 				qib_sdma_event_e60_hw_halted);
1614 		break;
1615 
1616 	case qib_sdma_state_s99_running:
1617 		__qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted);
1618 		__qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted);
1619 		break;
1620 	}
1621 
1622 	spin_unlock_irqrestore(&ppd->sdma_lock, flags);
1623 }
1624 
1625 /*
1626  * handle per-device errors (not per-port errors)
1627  */
1628 static noinline void handle_7322_errors(struct qib_devdata *dd)
1629 {
1630 	char *msg;
1631 	u64 iserr = 0;
1632 	u64 errs;
1633 	u64 mask;
1634 
1635 	qib_stats.sps_errints++;
1636 	errs = qib_read_kreg64(dd, kr_errstatus);
1637 	if (!errs) {
1638 		qib_devinfo(dd->pcidev,
1639 			"device error interrupt, but no error bits set!\n");
1640 		goto done;
1641 	}
1642 
1643 	/* don't report errors that are masked */
1644 	errs &= dd->cspec->errormask;
1645 	msg = dd->cspec->emsgbuf;
1646 
1647 	/* do these first, they are most important */
1648 	if (errs & QIB_E_HARDWARE) {
1649 		*msg = '\0';
1650 		qib_7322_handle_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf));
1651 	}
1652 
1653 	if (errs & QIB_E_SPKTERRS) {
1654 		qib_disarm_7322_senderrbufs(dd->pport);
1655 		qib_stats.sps_txerrs++;
1656 	} else if (errs & QIB_E_INVALIDADDR)
1657 		qib_stats.sps_txerrs++;
1658 	else if (errs & QIB_E_ARMLAUNCH) {
1659 		qib_stats.sps_txerrs++;
1660 		qib_disarm_7322_senderrbufs(dd->pport);
1661 	}
1662 	qib_write_kreg(dd, kr_errclear, errs);
1663 
1664 	/*
1665 	 * The ones we mask off are handled specially below
1666 	 * or above.  Also mask SDMADISABLED by default as it
1667 	 * is too chatty.
1668 	 */
1669 	mask = QIB_E_HARDWARE;
1670 	*msg = '\0';
1671 
1672 	err_decode(msg, sizeof(dd->cspec->emsgbuf), errs & ~mask,
1673 		   qib_7322error_msgs);
1674 
1675 	/*
1676 	 * Getting reset is a tragedy for all ports. Mark the device
1677 	 * _and_ the ports as "offline" in way meaningful to each.
1678 	 */
1679 	if (errs & QIB_E_RESET) {
1680 		int pidx;
1681 
1682 		qib_dev_err(dd,
1683 			"Got reset, requires re-init (unload and reload driver)\n");
1684 		dd->flags &= ~QIB_INITTED;  /* needs re-init */
1685 		/* mark as having had error */
1686 		*dd->devstatusp |= QIB_STATUS_HWERROR;
1687 		for (pidx = 0; pidx < dd->num_pports; ++pidx)
1688 			if (dd->pport[pidx].link_speed_supported)
1689 				*dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF;
1690 	}
1691 
1692 	if (*msg && iserr)
1693 		qib_dev_err(dd, "%s error\n", msg);
1694 
1695 	/*
1696 	 * If there were hdrq or egrfull errors, wake up any processes
1697 	 * waiting in poll.  We used to try to check which contexts had
1698 	 * the overflow, but given the cost of that and the chip reads
1699 	 * to support it, it's better to just wake everybody up if we
1700 	 * get an overflow; waiters can poll again if it's not them.
1701 	 */
1702 	if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) {
1703 		qib_handle_urcv(dd, ~0U);
1704 		if (errs & ERR_MASK(RcvEgrFullErr))
1705 			qib_stats.sps_buffull++;
1706 		else
1707 			qib_stats.sps_hdrfull++;
1708 	}
1709 
1710 done:
1711 	return;
1712 }
1713 
1714 static void qib_error_tasklet(struct tasklet_struct *t)
1715 {
1716 	struct qib_devdata *dd = from_tasklet(dd, t, error_tasklet);
1717 
1718 	handle_7322_errors(dd);
1719 	qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
1720 }
1721 
1722 static void reenable_chase(struct timer_list *t)
1723 {
1724 	struct qib_chippport_specific *cp = from_timer(cp, t, chase_timer);
1725 	struct qib_pportdata *ppd = cp->ppd;
1726 
1727 	ppd->cpspec->chase_timer.expires = 0;
1728 	qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN,
1729 		QLOGIC_IB_IBCC_LINKINITCMD_POLL);
1730 }
1731 
1732 static void disable_chase(struct qib_pportdata *ppd, unsigned long tnow,
1733 		u8 ibclt)
1734 {
1735 	ppd->cpspec->chase_end = 0;
1736 
1737 	if (!qib_chase)
1738 		return;
1739 
1740 	qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN,
1741 		QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
1742 	ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME;
1743 	add_timer(&ppd->cpspec->chase_timer);
1744 }
1745 
1746 static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst)
1747 {
1748 	u8 ibclt;
1749 	unsigned long tnow;
1750 
1751 	ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState);
1752 
1753 	/*
1754 	 * Detect and handle the state chase issue, where we can
1755 	 * get stuck if we are unlucky on timing on both sides of
1756 	 * the link.   If we are, we disable, set a timer, and
1757 	 * then re-enable.
1758 	 */
1759 	switch (ibclt) {
1760 	case IB_7322_LT_STATE_CFGRCVFCFG:
1761 	case IB_7322_LT_STATE_CFGWAITRMT:
1762 	case IB_7322_LT_STATE_TXREVLANES:
1763 	case IB_7322_LT_STATE_CFGENH:
1764 		tnow = jiffies;
1765 		if (ppd->cpspec->chase_end &&
1766 		     time_after(tnow, ppd->cpspec->chase_end))
1767 			disable_chase(ppd, tnow, ibclt);
1768 		else if (!ppd->cpspec->chase_end)
1769 			ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME;
1770 		break;
1771 	default:
1772 		ppd->cpspec->chase_end = 0;
1773 		break;
1774 	}
1775 
1776 	if (((ibclt >= IB_7322_LT_STATE_CFGTEST &&
1777 	      ibclt <= IB_7322_LT_STATE_CFGWAITENH) ||
1778 	     ibclt == IB_7322_LT_STATE_LINKUP) &&
1779 	    (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) {
1780 		force_h1(ppd);
1781 		ppd->cpspec->qdr_reforce = 1;
1782 		if (!ppd->dd->cspec->r1)
1783 			serdes_7322_los_enable(ppd, 0);
1784 	} else if (ppd->cpspec->qdr_reforce &&
1785 		(ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) &&
1786 		 (ibclt == IB_7322_LT_STATE_CFGENH ||
1787 		ibclt == IB_7322_LT_STATE_CFGIDLE ||
1788 		ibclt == IB_7322_LT_STATE_LINKUP))
1789 		force_h1(ppd);
1790 
1791 	if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) &&
1792 	    ppd->link_speed_enabled == QIB_IB_QDR &&
1793 	    (ibclt == IB_7322_LT_STATE_CFGTEST ||
1794 	     ibclt == IB_7322_LT_STATE_CFGENH ||
1795 	     (ibclt >= IB_7322_LT_STATE_POLLACTIVE &&
1796 	      ibclt <= IB_7322_LT_STATE_SLEEPQUIET)))
1797 		adj_tx_serdes(ppd);
1798 
1799 	if (ibclt != IB_7322_LT_STATE_LINKUP) {
1800 		u8 ltstate = qib_7322_phys_portstate(ibcst);
1801 		u8 pibclt = (u8)SYM_FIELD(ppd->lastibcstat, IBCStatusA_0,
1802 					  LinkTrainingState);
1803 		if (!ppd->dd->cspec->r1 &&
1804 		    pibclt == IB_7322_LT_STATE_LINKUP &&
1805 		    ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER &&
1806 		    ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN &&
1807 		    ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT &&
1808 		    ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE)
1809 			/* If the link went down (but no into recovery,
1810 			 * turn LOS back on */
1811 			serdes_7322_los_enable(ppd, 1);
1812 		if (!ppd->cpspec->qdr_dfe_on &&
1813 		    ibclt <= IB_7322_LT_STATE_SLEEPQUIET) {
1814 			ppd->cpspec->qdr_dfe_on = 1;
1815 			ppd->cpspec->qdr_dfe_time = 0;
1816 			/* On link down, reenable QDR adaptation */
1817 			qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
1818 					    ppd->dd->cspec->r1 ?
1819 					    QDR_STATIC_ADAPT_DOWN_R1 :
1820 					    QDR_STATIC_ADAPT_DOWN);
1821 			pr_info(
1822 				"IB%u:%u re-enabled QDR adaptation ibclt %x\n",
1823 				ppd->dd->unit, ppd->port, ibclt);
1824 		}
1825 	}
1826 }
1827 
1828 static int qib_7322_set_ib_cfg(struct qib_pportdata *, int, u32);
1829 
1830 /*
1831  * This is per-pport error handling.
1832  * will likely get it's own MSIx interrupt (one for each port,
1833  * although just a single handler).
1834  */
1835 static noinline void handle_7322_p_errors(struct qib_pportdata *ppd)
1836 {
1837 	char *msg;
1838 	u64 ignore_this_time = 0, iserr = 0, errs, fmask;
1839 	struct qib_devdata *dd = ppd->dd;
1840 
1841 	/* do this as soon as possible */
1842 	fmask = qib_read_kreg64(dd, kr_act_fmask);
1843 	if (!fmask)
1844 		check_7322_rxe_status(ppd);
1845 
1846 	errs = qib_read_kreg_port(ppd, krp_errstatus);
1847 	if (!errs)
1848 		qib_devinfo(dd->pcidev,
1849 			 "Port%d error interrupt, but no error bits set!\n",
1850 			 ppd->port);
1851 	if (!fmask)
1852 		errs &= ~QIB_E_P_IBSTATUSCHANGED;
1853 	if (!errs)
1854 		goto done;
1855 
1856 	msg = ppd->cpspec->epmsgbuf;
1857 	*msg = '\0';
1858 
1859 	if (errs & ~QIB_E_P_BITSEXTANT) {
1860 		err_decode(msg, sizeof(ppd->cpspec->epmsgbuf),
1861 			   errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs);
1862 		if (!*msg)
1863 			snprintf(msg, sizeof(ppd->cpspec->epmsgbuf),
1864 				 "no others");
1865 		qib_dev_porterr(dd, ppd->port,
1866 			"error interrupt with unknown errors 0x%016Lx set (and %s)\n",
1867 			(errs & ~QIB_E_P_BITSEXTANT), msg);
1868 		*msg = '\0';
1869 	}
1870 
1871 	if (errs & QIB_E_P_SHDR) {
1872 		u64 symptom;
1873 
1874 		/* determine cause, then write to clear */
1875 		symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom);
1876 		qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0);
1877 		err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), symptom,
1878 			   hdrchk_msgs);
1879 		*msg = '\0';
1880 		/* senderrbuf cleared in SPKTERRS below */
1881 	}
1882 
1883 	if (errs & QIB_E_P_SPKTERRS) {
1884 		if ((errs & QIB_E_P_LINK_PKTERRS) &&
1885 		    !(ppd->lflags & QIBL_LINKACTIVE)) {
1886 			/*
1887 			 * This can happen when trying to bring the link
1888 			 * up, but the IB link changes state at the "wrong"
1889 			 * time. The IB logic then complains that the packet
1890 			 * isn't valid.  We don't want to confuse people, so
1891 			 * we just don't print them, except at debug
1892 			 */
1893 			err_decode(msg, sizeof(ppd->cpspec->epmsgbuf),
1894 				   (errs & QIB_E_P_LINK_PKTERRS),
1895 				   qib_7322p_error_msgs);
1896 			*msg = '\0';
1897 			ignore_this_time = errs & QIB_E_P_LINK_PKTERRS;
1898 		}
1899 		qib_disarm_7322_senderrbufs(ppd);
1900 	} else if ((errs & QIB_E_P_LINK_PKTERRS) &&
1901 		   !(ppd->lflags & QIBL_LINKACTIVE)) {
1902 		/*
1903 		 * This can happen when SMA is trying to bring the link
1904 		 * up, but the IB link changes state at the "wrong" time.
1905 		 * The IB logic then complains that the packet isn't
1906 		 * valid.  We don't want to confuse people, so we just
1907 		 * don't print them, except at debug
1908 		 */
1909 		err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), errs,
1910 			   qib_7322p_error_msgs);
1911 		ignore_this_time = errs & QIB_E_P_LINK_PKTERRS;
1912 		*msg = '\0';
1913 	}
1914 
1915 	qib_write_kreg_port(ppd, krp_errclear, errs);
1916 
1917 	errs &= ~ignore_this_time;
1918 	if (!errs)
1919 		goto done;
1920 
1921 	if (errs & QIB_E_P_RPKTERRS)
1922 		qib_stats.sps_rcverrs++;
1923 	if (errs & QIB_E_P_SPKTERRS)
1924 		qib_stats.sps_txerrs++;
1925 
1926 	iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS);
1927 
1928 	if (errs & QIB_E_P_SDMAERRS)
1929 		sdma_7322_p_errors(ppd, errs);
1930 
1931 	if (errs & QIB_E_P_IBSTATUSCHANGED) {
1932 		u64 ibcs;
1933 		u8 ltstate;
1934 
1935 		ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a);
1936 		ltstate = qib_7322_phys_portstate(ibcs);
1937 
1938 		if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
1939 			handle_serdes_issues(ppd, ibcs);
1940 		if (!(ppd->cpspec->ibcctrl_a &
1941 		      SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) {
1942 			/*
1943 			 * We got our interrupt, so init code should be
1944 			 * happy and not try alternatives. Now squelch
1945 			 * other "chatter" from link-negotiation (pre Init)
1946 			 */
1947 			ppd->cpspec->ibcctrl_a |=
1948 				SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn);
1949 			qib_write_kreg_port(ppd, krp_ibcctrl_a,
1950 					    ppd->cpspec->ibcctrl_a);
1951 		}
1952 
1953 		/* Update our picture of width and speed from chip */
1954 		ppd->link_width_active =
1955 			(ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ?
1956 			    IB_WIDTH_4X : IB_WIDTH_1X;
1957 		ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0,
1958 			LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs &
1959 			  SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ?
1960 				   QIB_IB_DDR : QIB_IB_SDR;
1961 
1962 		if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate !=
1963 		    IB_PHYSPORTSTATE_DISABLED)
1964 			qib_set_ib_7322_lstate(ppd, 0,
1965 			       QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
1966 		else
1967 			/*
1968 			 * Since going into a recovery state causes the link
1969 			 * state to go down and since recovery is transitory,
1970 			 * it is better if we "miss" ever seeing the link
1971 			 * training state go into recovery (i.e., ignore this
1972 			 * transition for link state special handling purposes)
1973 			 * without updating lastibcstat.
1974 			 */
1975 			if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER &&
1976 			    ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN &&
1977 			    ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT &&
1978 			    ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE)
1979 				qib_handle_e_ibstatuschanged(ppd, ibcs);
1980 	}
1981 	if (*msg && iserr)
1982 		qib_dev_porterr(dd, ppd->port, "%s error\n", msg);
1983 
1984 	if (ppd->state_wanted & ppd->lflags)
1985 		wake_up_interruptible(&ppd->state_wait);
1986 done:
1987 	return;
1988 }
1989 
1990 /* enable/disable chip from delivering interrupts */
1991 static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable)
1992 {
1993 	if (enable) {
1994 		if (dd->flags & QIB_BADINTR)
1995 			return;
1996 		qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask);
1997 		/* cause any pending enabled interrupts to be re-delivered */
1998 		qib_write_kreg(dd, kr_intclear, 0ULL);
1999 		if (dd->cspec->num_msix_entries) {
2000 			/* and same for MSIx */
2001 			u64 val = qib_read_kreg64(dd, kr_intgranted);
2002 
2003 			if (val)
2004 				qib_write_kreg(dd, kr_intgranted, val);
2005 		}
2006 	} else
2007 		qib_write_kreg(dd, kr_intmask, 0ULL);
2008 }
2009 
2010 /*
2011  * Try to cleanup as much as possible for anything that might have gone
2012  * wrong while in freeze mode, such as pio buffers being written by user
2013  * processes (causing armlaunch), send errors due to going into freeze mode,
2014  * etc., and try to avoid causing extra interrupts while doing so.
2015  * Forcibly update the in-memory pioavail register copies after cleanup
2016  * because the chip won't do it while in freeze mode (the register values
2017  * themselves are kept correct).
2018  * Make sure that we don't lose any important interrupts by using the chip
2019  * feature that says that writing 0 to a bit in *clear that is set in
2020  * *status will cause an interrupt to be generated again (if allowed by
2021  * the *mask value).
2022  * This is in chip-specific code because of all of the register accesses,
2023  * even though the details are similar on most chips.
2024  */
2025 static void qib_7322_clear_freeze(struct qib_devdata *dd)
2026 {
2027 	int pidx;
2028 
2029 	/* disable error interrupts, to avoid confusion */
2030 	qib_write_kreg(dd, kr_errmask, 0ULL);
2031 
2032 	for (pidx = 0; pidx < dd->num_pports; ++pidx)
2033 		if (dd->pport[pidx].link_speed_supported)
2034 			qib_write_kreg_port(dd->pport + pidx, krp_errmask,
2035 					    0ULL);
2036 
2037 	/* also disable interrupts; errormask is sometimes overwritten */
2038 	qib_7322_set_intr_state(dd, 0);
2039 
2040 	/* clear the freeze, and be sure chip saw it */
2041 	qib_write_kreg(dd, kr_control, dd->control);
2042 	qib_read_kreg32(dd, kr_scratch);
2043 
2044 	/*
2045 	 * Force new interrupt if any hwerr, error or interrupt bits are
2046 	 * still set, and clear "safe" send packet errors related to freeze
2047 	 * and cancelling sends.  Re-enable error interrupts before possible
2048 	 * force of re-interrupt on pending interrupts.
2049 	 */
2050 	qib_write_kreg(dd, kr_hwerrclear, 0ULL);
2051 	qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE);
2052 	qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
2053 	/* We need to purge per-port errs and reset mask, too */
2054 	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
2055 		if (!dd->pport[pidx].link_speed_supported)
2056 			continue;
2057 		qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull);
2058 		qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull);
2059 	}
2060 	qib_7322_set_intr_state(dd, 1);
2061 }
2062 
2063 /* no error handling to speak of */
2064 /**
2065  * qib_7322_handle_hwerrors - display hardware errors.
2066  * @dd: the qlogic_ib device
2067  * @msg: the output buffer
2068  * @msgl: the size of the output buffer
2069  *
2070  * Use same msg buffer as regular errors to avoid excessive stack
2071  * use.  Most hardware errors are catastrophic, but for right now,
2072  * we'll print them and continue.  We reuse the same message buffer as
2073  * qib_handle_errors() to avoid excessive stack usage.
2074  */
2075 static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg,
2076 				     size_t msgl)
2077 {
2078 	u64 hwerrs;
2079 	u32 ctrl;
2080 	int isfatal = 0;
2081 
2082 	hwerrs = qib_read_kreg64(dd, kr_hwerrstatus);
2083 	if (!hwerrs)
2084 		goto bail;
2085 	if (hwerrs == ~0ULL) {
2086 		qib_dev_err(dd,
2087 			"Read of hardware error status failed (all bits set); ignoring\n");
2088 		goto bail;
2089 	}
2090 	qib_stats.sps_hwerrs++;
2091 
2092 	/* Always clear the error status register, except BIST fail */
2093 	qib_write_kreg(dd, kr_hwerrclear, hwerrs &
2094 		       ~HWE_MASK(PowerOnBISTFailed));
2095 
2096 	hwerrs &= dd->cspec->hwerrmask;
2097 
2098 	/* no EEPROM logging, yet */
2099 
2100 	if (hwerrs)
2101 		qib_devinfo(dd->pcidev,
2102 			"Hardware error: hwerr=0x%llx (cleared)\n",
2103 			(unsigned long long) hwerrs);
2104 
2105 	ctrl = qib_read_kreg32(dd, kr_control);
2106 	if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) {
2107 		/*
2108 		 * No recovery yet...
2109 		 */
2110 		if ((hwerrs & ~HWE_MASK(LATriggered)) ||
2111 		    dd->cspec->stay_in_freeze) {
2112 			/*
2113 			 * If any set that we aren't ignoring only make the
2114 			 * complaint once, in case it's stuck or recurring,
2115 			 * and we get here multiple times
2116 			 * Force link down, so switch knows, and
2117 			 * LEDs are turned off.
2118 			 */
2119 			if (dd->flags & QIB_INITTED)
2120 				isfatal = 1;
2121 		} else
2122 			qib_7322_clear_freeze(dd);
2123 	}
2124 
2125 	if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
2126 		isfatal = 1;
2127 		strlcpy(msg,
2128 			"[Memory BIST test failed, InfiniPath hardware unusable]",
2129 			msgl);
2130 		/* ignore from now on, so disable until driver reloaded */
2131 		dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
2132 		qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
2133 	}
2134 
2135 	err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs);
2136 
2137 	/* Ignore esoteric PLL failures et al. */
2138 
2139 	qib_dev_err(dd, "%s hardware error\n", msg);
2140 
2141 	if (hwerrs &
2142 		   (SYM_MASK(HwErrMask, SDmaMemReadErrMask_0) |
2143 		    SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) {
2144 		int pidx = 0;
2145 		int err;
2146 		unsigned long flags;
2147 		struct qib_pportdata *ppd = dd->pport;
2148 
2149 		for (; pidx < dd->num_pports; ++pidx, ppd++) {
2150 			err = 0;
2151 			if (pidx == 0 && (hwerrs &
2152 				SYM_MASK(HwErrMask, SDmaMemReadErrMask_0)))
2153 				err++;
2154 			if (pidx == 1 && (hwerrs &
2155 				SYM_MASK(HwErrMask, SDmaMemReadErrMask_1)))
2156 				err++;
2157 			if (err) {
2158 				spin_lock_irqsave(&ppd->sdma_lock, flags);
2159 				dump_sdma_7322_state(ppd);
2160 				spin_unlock_irqrestore(&ppd->sdma_lock, flags);
2161 			}
2162 		}
2163 	}
2164 
2165 	if (isfatal && !dd->diag_client) {
2166 		qib_dev_err(dd,
2167 			"Fatal Hardware Error, no longer usable, SN %.16s\n",
2168 			dd->serial);
2169 		/*
2170 		 * for /sys status file and user programs to print; if no
2171 		 * trailing brace is copied, we'll know it was truncated.
2172 		 */
2173 		if (dd->freezemsg)
2174 			snprintf(dd->freezemsg, dd->freezelen,
2175 				 "{%s}", msg);
2176 		qib_disable_after_error(dd);
2177 	}
2178 bail:;
2179 }
2180 
2181 /**
2182  * qib_7322_init_hwerrors - enable hardware errors
2183  * @dd: the qlogic_ib device
2184  *
2185  * now that we have finished initializing everything that might reasonably
2186  * cause a hardware error, and cleared those errors bits as they occur,
2187  * we can enable hardware errors in the mask (potentially enabling
2188  * freeze mode), and enable hardware errors as errors (along with
2189  * everything else) in errormask
2190  */
2191 static void qib_7322_init_hwerrors(struct qib_devdata *dd)
2192 {
2193 	int pidx;
2194 	u64 extsval;
2195 
2196 	extsval = qib_read_kreg64(dd, kr_extstatus);
2197 	if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED |
2198 			 QIB_EXTS_MEMBIST_ENDTEST)))
2199 		qib_dev_err(dd, "MemBIST did not complete!\n");
2200 
2201 	/* never clear BIST failure, so reported on each driver load */
2202 	qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed));
2203 	qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
2204 
2205 	/* clear all */
2206 	qib_write_kreg(dd, kr_errclear, ~0ULL);
2207 	/* enable errors that are masked, at least this first time. */
2208 	qib_write_kreg(dd, kr_errmask, ~0ULL);
2209 	dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask);
2210 	for (pidx = 0; pidx < dd->num_pports; ++pidx)
2211 		if (dd->pport[pidx].link_speed_supported)
2212 			qib_write_kreg_port(dd->pport + pidx, krp_errmask,
2213 					    ~0ULL);
2214 }
2215 
2216 /*
2217  * Disable and enable the armlaunch error.  Used for PIO bandwidth testing
2218  * on chips that are count-based, rather than trigger-based.  There is no
2219  * reference counting, but that's also fine, given the intended use.
2220  * Only chip-specific because it's all register accesses
2221  */
2222 static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable)
2223 {
2224 	if (enable) {
2225 		qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH);
2226 		dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH;
2227 	} else
2228 		dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH;
2229 	qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
2230 }
2231 
2232 /*
2233  * Formerly took parameter <which> in pre-shifted,
2234  * pre-merged form with LinkCmd and LinkInitCmd
2235  * together, and assuming the zero was NOP.
2236  */
2237 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd,
2238 				   u16 linitcmd)
2239 {
2240 	u64 mod_wd;
2241 	struct qib_devdata *dd = ppd->dd;
2242 	unsigned long flags;
2243 
2244 	if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) {
2245 		/*
2246 		 * If we are told to disable, note that so link-recovery
2247 		 * code does not attempt to bring us back up.
2248 		 * Also reset everything that we can, so we start
2249 		 * completely clean when re-enabled (before we
2250 		 * actually issue the disable to the IBC)
2251 		 */
2252 		qib_7322_mini_pcs_reset(ppd);
2253 		spin_lock_irqsave(&ppd->lflags_lock, flags);
2254 		ppd->lflags |= QIBL_IB_LINK_DISABLED;
2255 		spin_unlock_irqrestore(&ppd->lflags_lock, flags);
2256 	} else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) {
2257 		/*
2258 		 * Any other linkinitcmd will lead to LINKDOWN and then
2259 		 * to INIT (if all is well), so clear flag to let
2260 		 * link-recovery code attempt to bring us back up.
2261 		 */
2262 		spin_lock_irqsave(&ppd->lflags_lock, flags);
2263 		ppd->lflags &= ~QIBL_IB_LINK_DISABLED;
2264 		spin_unlock_irqrestore(&ppd->lflags_lock, flags);
2265 		/*
2266 		 * Clear status change interrupt reduction so the
2267 		 * new state is seen.
2268 		 */
2269 		ppd->cpspec->ibcctrl_a &=
2270 			~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn);
2271 	}
2272 
2273 	mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) |
2274 		(linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
2275 
2276 	qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a |
2277 			    mod_wd);
2278 	/* write to chip to prevent back-to-back writes of ibc reg */
2279 	qib_write_kreg(dd, kr_scratch, 0);
2280 
2281 }
2282 
2283 /*
2284  * The total RCV buffer memory is 64KB, used for both ports, and is
2285  * in units of 64 bytes (same as IB flow control credit unit).
2286  * The consumedVL unit in the same registers are in 32 byte units!
2287  * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks,
2288  * and we can therefore allocate just 9 IB credits for 2 VL15 packets
2289  * in krp_rxcreditvl15, rather than 10.
2290  */
2291 #define RCV_BUF_UNITSZ 64
2292 #define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports))
2293 
2294 static void set_vls(struct qib_pportdata *ppd)
2295 {
2296 	int i, numvls, totcred, cred_vl, vl0extra;
2297 	struct qib_devdata *dd = ppd->dd;
2298 	u64 val;
2299 
2300 	numvls = qib_num_vls(ppd->vls_operational);
2301 
2302 	/*
2303 	 * Set up per-VL credits. Below is kluge based on these assumptions:
2304 	 * 1) port is disabled at the time early_init is called.
2305 	 * 2) give VL15 17 credits, for two max-plausible packets.
2306 	 * 3) Give VL0-N the rest, with any rounding excess used for VL0
2307 	 */
2308 	/* 2 VL15 packets @ 288 bytes each (including IB headers) */
2309 	totcred = NUM_RCV_BUF_UNITS(dd);
2310 	cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ;
2311 	totcred -= cred_vl;
2312 	qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl);
2313 	cred_vl = totcred / numvls;
2314 	vl0extra = totcred - cred_vl * numvls;
2315 	qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra);
2316 	for (i = 1; i < numvls; i++)
2317 		qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl);
2318 	for (; i < 8; i++) /* no buffer space for other VLs */
2319 		qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0);
2320 
2321 	/* Notify IBC that credits need to be recalculated */
2322 	val = qib_read_kreg_port(ppd, krp_ibsdtestiftx);
2323 	val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE);
2324 	qib_write_kreg_port(ppd, krp_ibsdtestiftx, val);
2325 	qib_write_kreg(dd, kr_scratch, 0ULL);
2326 	val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE);
2327 	qib_write_kreg_port(ppd, krp_ibsdtestiftx, val);
2328 
2329 	for (i = 0; i < numvls; i++)
2330 		val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i);
2331 	val = qib_read_kreg_port(ppd, krp_rxcreditvl15);
2332 
2333 	/* Change the number of operational VLs */
2334 	ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a &
2335 				~SYM_MASK(IBCCtrlA_0, NumVLane)) |
2336 		((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane));
2337 	qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
2338 	qib_write_kreg(dd, kr_scratch, 0ULL);
2339 }
2340 
2341 /*
2342  * The code that deals with actual SerDes is in serdes_7322_init().
2343  * Compared to the code for iba7220, it is minimal.
2344  */
2345 static int serdes_7322_init(struct qib_pportdata *ppd);
2346 
2347 /**
2348  * qib_7322_bringup_serdes - bring up the serdes
2349  * @ppd: physical port on the qlogic_ib device
2350  */
2351 static int qib_7322_bringup_serdes(struct qib_pportdata *ppd)
2352 {
2353 	struct qib_devdata *dd = ppd->dd;
2354 	u64 val, guid, ibc;
2355 	unsigned long flags;
2356 
2357 	/*
2358 	 * SerDes model not in Pd, but still need to
2359 	 * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere
2360 	 * eventually.
2361 	 */
2362 	/* Put IBC in reset, sends disabled (should be in reset already) */
2363 	ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn);
2364 	qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
2365 	qib_write_kreg(dd, kr_scratch, 0ULL);
2366 
2367 	/* ensure previous Tx parameters are not still forced */
2368 	qib_write_kreg_port(ppd, krp_tx_deemph_override,
2369 		SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
2370 		reset_tx_deemphasis_override));
2371 
2372 	if (qib_compat_ddr_negotiate) {
2373 		ppd->cpspec->ibdeltainprog = 1;
2374 		ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd,
2375 						crp_ibsymbolerr);
2376 		ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd,
2377 						crp_iblinkerrrecov);
2378 	}
2379 
2380 	/* flowcontrolwatermark is in units of KBytes */
2381 	ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark);
2382 	/*
2383 	 * Flow control is sent this often, even if no changes in
2384 	 * buffer space occur.  Units are 128ns for this chip.
2385 	 * Set to 3usec.
2386 	 */
2387 	ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod);
2388 	/* max error tolerance */
2389 	ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold);
2390 	/* IB credit flow control. */
2391 	ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold);
2392 	/*
2393 	 * set initial max size pkt IBC will send, including ICRC; it's the
2394 	 * PIO buffer size in dwords, less 1; also see qib_set_mtu()
2395 	 */
2396 	ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) <<
2397 		SYM_LSB(IBCCtrlA_0, MaxPktLen);
2398 	ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */
2399 
2400 	/*
2401 	 * Reset the PCS interface to the serdes (and also ibc, which is still
2402 	 * in reset from above).  Writes new value of ibcctrl_a as last step.
2403 	 */
2404 	qib_7322_mini_pcs_reset(ppd);
2405 
2406 	if (!ppd->cpspec->ibcctrl_b) {
2407 		unsigned lse = ppd->link_speed_enabled;
2408 
2409 		/*
2410 		 * Not on re-init after reset, establish shadow
2411 		 * and force initial config.
2412 		 */
2413 		ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd,
2414 							     krp_ibcctrl_b);
2415 		ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR |
2416 				IBA7322_IBC_SPEED_DDR |
2417 				IBA7322_IBC_SPEED_SDR |
2418 				IBA7322_IBC_WIDTH_AUTONEG |
2419 				SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED));
2420 		if (lse & (lse - 1)) /* Muliple speeds enabled */
2421 			ppd->cpspec->ibcctrl_b |=
2422 				(lse << IBA7322_IBC_SPEED_LSB) |
2423 				IBA7322_IBC_IBTA_1_2_MASK |
2424 				IBA7322_IBC_MAX_SPEED_MASK;
2425 		else
2426 			ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ?
2427 				IBA7322_IBC_SPEED_QDR |
2428 				 IBA7322_IBC_IBTA_1_2_MASK :
2429 				(lse == QIB_IB_DDR) ?
2430 					IBA7322_IBC_SPEED_DDR :
2431 					IBA7322_IBC_SPEED_SDR;
2432 		if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) ==
2433 		    (IB_WIDTH_1X | IB_WIDTH_4X))
2434 			ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG;
2435 		else
2436 			ppd->cpspec->ibcctrl_b |=
2437 				ppd->link_width_enabled == IB_WIDTH_4X ?
2438 				IBA7322_IBC_WIDTH_4X_ONLY :
2439 				IBA7322_IBC_WIDTH_1X_ONLY;
2440 
2441 		/* always enable these on driver reload, not sticky */
2442 		ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK |
2443 			IBA7322_IBC_HRTBT_MASK);
2444 	}
2445 	qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b);
2446 
2447 	/* setup so we have more time at CFGTEST to change H1 */
2448 	val = qib_read_kreg_port(ppd, krp_ibcctrl_c);
2449 	val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH);
2450 	val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH);
2451 	qib_write_kreg_port(ppd, krp_ibcctrl_c, val);
2452 
2453 	serdes_7322_init(ppd);
2454 
2455 	guid = be64_to_cpu(ppd->guid);
2456 	if (!guid) {
2457 		if (dd->base_guid)
2458 			guid = be64_to_cpu(dd->base_guid) + ppd->port - 1;
2459 		ppd->guid = cpu_to_be64(guid);
2460 	}
2461 
2462 	qib_write_kreg_port(ppd, krp_hrtbt_guid, guid);
2463 	/* write to chip to prevent back-to-back writes of ibc reg */
2464 	qib_write_kreg(dd, kr_scratch, 0);
2465 
2466 	/* Enable port */
2467 	ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn);
2468 	set_vls(ppd);
2469 
2470 	/* initially come up DISABLED, without sending anything. */
2471 	val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
2472 					QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
2473 	qib_write_kreg_port(ppd, krp_ibcctrl_a, val);
2474 	qib_write_kreg(dd, kr_scratch, 0ULL);
2475 	/* clear the linkinit cmds */
2476 	ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd);
2477 
2478 	/* be paranoid against later code motion, etc. */
2479 	spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
2480 	ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable);
2481 	qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl);
2482 	spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
2483 
2484 	/* Also enable IBSTATUSCHG interrupt.  */
2485 	val = qib_read_kreg_port(ppd, krp_errmask);
2486 	qib_write_kreg_port(ppd, krp_errmask,
2487 		val | ERR_MASK_N(IBStatusChanged));
2488 
2489 	/* Always zero until we start messing with SerDes for real */
2490 	return 0;
2491 }
2492 
2493 /**
2494  * qib_7322_mini_quiet_serdes - set serdes to txidle
2495  * @ppd: the qlogic_ib device
2496  * Called when driver is being unloaded
2497  */
2498 static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd)
2499 {
2500 	u64 val;
2501 	unsigned long flags;
2502 
2503 	qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
2504 
2505 	spin_lock_irqsave(&ppd->lflags_lock, flags);
2506 	ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
2507 	spin_unlock_irqrestore(&ppd->lflags_lock, flags);
2508 	wake_up(&ppd->cpspec->autoneg_wait);
2509 	cancel_delayed_work_sync(&ppd->cpspec->autoneg_work);
2510 	if (ppd->dd->cspec->r1)
2511 		cancel_delayed_work_sync(&ppd->cpspec->ipg_work);
2512 
2513 	ppd->cpspec->chase_end = 0;
2514 	if (ppd->cpspec->chase_timer.function) /* if initted */
2515 		del_timer_sync(&ppd->cpspec->chase_timer);
2516 
2517 	/*
2518 	 * Despite the name, actually disables IBC as well. Do it when
2519 	 * we are as sure as possible that no more packets can be
2520 	 * received, following the down and the PCS reset.
2521 	 * The actual disabling happens in qib_7322_mini_pci_reset(),
2522 	 * along with the PCS being reset.
2523 	 */
2524 	ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn);
2525 	qib_7322_mini_pcs_reset(ppd);
2526 
2527 	/*
2528 	 * Update the adjusted counters so the adjustment persists
2529 	 * across driver reload.
2530 	 */
2531 	if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta ||
2532 	    ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) {
2533 		struct qib_devdata *dd = ppd->dd;
2534 		u64 diagc;
2535 
2536 		/* enable counter writes */
2537 		diagc = qib_read_kreg64(dd, kr_hwdiagctrl);
2538 		qib_write_kreg(dd, kr_hwdiagctrl,
2539 			       diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable));
2540 
2541 		if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) {
2542 			val = read_7322_creg32_port(ppd, crp_ibsymbolerr);
2543 			if (ppd->cpspec->ibdeltainprog)
2544 				val -= val - ppd->cpspec->ibsymsnap;
2545 			val -= ppd->cpspec->ibsymdelta;
2546 			write_7322_creg_port(ppd, crp_ibsymbolerr, val);
2547 		}
2548 		if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) {
2549 			val = read_7322_creg32_port(ppd, crp_iblinkerrrecov);
2550 			if (ppd->cpspec->ibdeltainprog)
2551 				val -= val - ppd->cpspec->iblnkerrsnap;
2552 			val -= ppd->cpspec->iblnkerrdelta;
2553 			write_7322_creg_port(ppd, crp_iblinkerrrecov, val);
2554 		}
2555 		if (ppd->cpspec->iblnkdowndelta) {
2556 			val = read_7322_creg32_port(ppd, crp_iblinkdown);
2557 			val += ppd->cpspec->iblnkdowndelta;
2558 			write_7322_creg_port(ppd, crp_iblinkdown, val);
2559 		}
2560 		/*
2561 		 * No need to save ibmalfdelta since IB perfcounters
2562 		 * are cleared on driver reload.
2563 		 */
2564 
2565 		/* and disable counter writes */
2566 		qib_write_kreg(dd, kr_hwdiagctrl, diagc);
2567 	}
2568 }
2569 
2570 /**
2571  * qib_setup_7322_setextled - set the state of the two external LEDs
2572  * @ppd: physical port on the qlogic_ib device
2573  * @on: whether the link is up or not
2574  *
2575  * The exact combo of LEDs if on is true is determined by looking
2576  * at the ibcstatus.
2577  *
2578  * These LEDs indicate the physical and logical state of IB link.
2579  * For this chip (at least with recommended board pinouts), LED1
2580  * is Yellow (logical state) and LED2 is Green (physical state),
2581  *
2582  * Note:  We try to match the Mellanox HCA LED behavior as best
2583  * we can.  Green indicates physical link state is OK (something is
2584  * plugged in, and we can train).
2585  * Amber indicates the link is logically up (ACTIVE).
2586  * Mellanox further blinks the amber LED to indicate data packet
2587  * activity, but we have no hardware support for that, so it would
2588  * require waking up every 10-20 msecs and checking the counters
2589  * on the chip, and then turning the LED off if appropriate.  That's
2590  * visible overhead, so not something we will do.
2591  */
2592 static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on)
2593 {
2594 	struct qib_devdata *dd = ppd->dd;
2595 	u64 extctl, ledblink = 0, val;
2596 	unsigned long flags;
2597 	int yel, grn;
2598 
2599 	/*
2600 	 * The diags use the LED to indicate diag info, so we leave
2601 	 * the external LED alone when the diags are running.
2602 	 */
2603 	if (dd->diag_client)
2604 		return;
2605 
2606 	/* Allow override of LED display for, e.g. Locating system in rack */
2607 	if (ppd->led_override) {
2608 		grn = (ppd->led_override & QIB_LED_PHYS);
2609 		yel = (ppd->led_override & QIB_LED_LOG);
2610 	} else if (on) {
2611 		val = qib_read_kreg_port(ppd, krp_ibcstatus_a);
2612 		grn = qib_7322_phys_portstate(val) ==
2613 			IB_PHYSPORTSTATE_LINKUP;
2614 		yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE;
2615 	} else {
2616 		grn = 0;
2617 		yel = 0;
2618 	}
2619 
2620 	spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
2621 	extctl = dd->cspec->extctrl & (ppd->port == 1 ?
2622 		~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK);
2623 	if (grn) {
2624 		extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN;
2625 		/*
2626 		 * Counts are in chip clock (4ns) periods.
2627 		 * This is 1/16 sec (66.6ms) on,
2628 		 * 3/16 sec (187.5 ms) off, with packets rcvd.
2629 		 */
2630 		ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) |
2631 			((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT);
2632 	}
2633 	if (yel)
2634 		extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL;
2635 	dd->cspec->extctrl = extctl;
2636 	qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
2637 	spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
2638 
2639 	if (ledblink) /* blink the LED on packet receive */
2640 		qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink);
2641 }
2642 
2643 #ifdef CONFIG_INFINIBAND_QIB_DCA
2644 
2645 static int qib_7322_notify_dca(struct qib_devdata *dd, unsigned long event)
2646 {
2647 	switch (event) {
2648 	case DCA_PROVIDER_ADD:
2649 		if (dd->flags & QIB_DCA_ENABLED)
2650 			break;
2651 		if (!dca_add_requester(&dd->pcidev->dev)) {
2652 			qib_devinfo(dd->pcidev, "DCA enabled\n");
2653 			dd->flags |= QIB_DCA_ENABLED;
2654 			qib_setup_dca(dd);
2655 		}
2656 		break;
2657 	case DCA_PROVIDER_REMOVE:
2658 		if (dd->flags & QIB_DCA_ENABLED) {
2659 			dca_remove_requester(&dd->pcidev->dev);
2660 			dd->flags &= ~QIB_DCA_ENABLED;
2661 			dd->cspec->dca_ctrl = 0;
2662 			qib_write_kreg(dd, KREG_IDX(DCACtrlA),
2663 				dd->cspec->dca_ctrl);
2664 		}
2665 		break;
2666 	}
2667 	return 0;
2668 }
2669 
2670 static void qib_update_rhdrq_dca(struct qib_ctxtdata *rcd, int cpu)
2671 {
2672 	struct qib_devdata *dd = rcd->dd;
2673 	struct qib_chip_specific *cspec = dd->cspec;
2674 
2675 	if (!(dd->flags & QIB_DCA_ENABLED))
2676 		return;
2677 	if (cspec->rhdr_cpu[rcd->ctxt] != cpu) {
2678 		const struct dca_reg_map *rmp;
2679 
2680 		cspec->rhdr_cpu[rcd->ctxt] = cpu;
2681 		rmp = &dca_rcvhdr_reg_map[rcd->ctxt];
2682 		cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] &= rmp->mask;
2683 		cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] |=
2684 			(u64) dca3_get_tag(&dd->pcidev->dev, cpu) << rmp->lsb;
2685 		qib_devinfo(dd->pcidev,
2686 			"Ctxt %d cpu %d dca %llx\n", rcd->ctxt, cpu,
2687 			(long long) cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]);
2688 		qib_write_kreg(dd, rmp->regno,
2689 			       cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]);
2690 		cspec->dca_ctrl |= SYM_MASK(DCACtrlA, RcvHdrqDCAEnable);
2691 		qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl);
2692 	}
2693 }
2694 
2695 static void qib_update_sdma_dca(struct qib_pportdata *ppd, int cpu)
2696 {
2697 	struct qib_devdata *dd = ppd->dd;
2698 	struct qib_chip_specific *cspec = dd->cspec;
2699 	unsigned pidx = ppd->port - 1;
2700 
2701 	if (!(dd->flags & QIB_DCA_ENABLED))
2702 		return;
2703 	if (cspec->sdma_cpu[pidx] != cpu) {
2704 		cspec->sdma_cpu[pidx] = cpu;
2705 		cspec->dca_rcvhdr_ctrl[4] &= ~(ppd->hw_pidx ?
2706 			SYM_MASK(DCACtrlF, SendDma1DCAOPH) :
2707 			SYM_MASK(DCACtrlF, SendDma0DCAOPH));
2708 		cspec->dca_rcvhdr_ctrl[4] |=
2709 			(u64) dca3_get_tag(&dd->pcidev->dev, cpu) <<
2710 				(ppd->hw_pidx ?
2711 					SYM_LSB(DCACtrlF, SendDma1DCAOPH) :
2712 					SYM_LSB(DCACtrlF, SendDma0DCAOPH));
2713 		qib_devinfo(dd->pcidev,
2714 			"sdma %d cpu %d dca %llx\n", ppd->hw_pidx, cpu,
2715 			(long long) cspec->dca_rcvhdr_ctrl[4]);
2716 		qib_write_kreg(dd, KREG_IDX(DCACtrlF),
2717 			       cspec->dca_rcvhdr_ctrl[4]);
2718 		cspec->dca_ctrl |= ppd->hw_pidx ?
2719 			SYM_MASK(DCACtrlA, SendDMAHead1DCAEnable) :
2720 			SYM_MASK(DCACtrlA, SendDMAHead0DCAEnable);
2721 		qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl);
2722 	}
2723 }
2724 
2725 static void qib_setup_dca(struct qib_devdata *dd)
2726 {
2727 	struct qib_chip_specific *cspec = dd->cspec;
2728 	int i;
2729 
2730 	for (i = 0; i < ARRAY_SIZE(cspec->rhdr_cpu); i++)
2731 		cspec->rhdr_cpu[i] = -1;
2732 	for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++)
2733 		cspec->sdma_cpu[i] = -1;
2734 	cspec->dca_rcvhdr_ctrl[0] =
2735 		(1ULL << SYM_LSB(DCACtrlB, RcvHdrq0DCAXfrCnt)) |
2736 		(1ULL << SYM_LSB(DCACtrlB, RcvHdrq1DCAXfrCnt)) |
2737 		(1ULL << SYM_LSB(DCACtrlB, RcvHdrq2DCAXfrCnt)) |
2738 		(1ULL << SYM_LSB(DCACtrlB, RcvHdrq3DCAXfrCnt));
2739 	cspec->dca_rcvhdr_ctrl[1] =
2740 		(1ULL << SYM_LSB(DCACtrlC, RcvHdrq4DCAXfrCnt)) |
2741 		(1ULL << SYM_LSB(DCACtrlC, RcvHdrq5DCAXfrCnt)) |
2742 		(1ULL << SYM_LSB(DCACtrlC, RcvHdrq6DCAXfrCnt)) |
2743 		(1ULL << SYM_LSB(DCACtrlC, RcvHdrq7DCAXfrCnt));
2744 	cspec->dca_rcvhdr_ctrl[2] =
2745 		(1ULL << SYM_LSB(DCACtrlD, RcvHdrq8DCAXfrCnt)) |
2746 		(1ULL << SYM_LSB(DCACtrlD, RcvHdrq9DCAXfrCnt)) |
2747 		(1ULL << SYM_LSB(DCACtrlD, RcvHdrq10DCAXfrCnt)) |
2748 		(1ULL << SYM_LSB(DCACtrlD, RcvHdrq11DCAXfrCnt));
2749 	cspec->dca_rcvhdr_ctrl[3] =
2750 		(1ULL << SYM_LSB(DCACtrlE, RcvHdrq12DCAXfrCnt)) |
2751 		(1ULL << SYM_LSB(DCACtrlE, RcvHdrq13DCAXfrCnt)) |
2752 		(1ULL << SYM_LSB(DCACtrlE, RcvHdrq14DCAXfrCnt)) |
2753 		(1ULL << SYM_LSB(DCACtrlE, RcvHdrq15DCAXfrCnt));
2754 	cspec->dca_rcvhdr_ctrl[4] =
2755 		(1ULL << SYM_LSB(DCACtrlF, RcvHdrq16DCAXfrCnt)) |
2756 		(1ULL << SYM_LSB(DCACtrlF, RcvHdrq17DCAXfrCnt));
2757 	for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++)
2758 		qib_write_kreg(dd, KREG_IDX(DCACtrlB) + i,
2759 			       cspec->dca_rcvhdr_ctrl[i]);
2760 	for (i = 0; i < cspec->num_msix_entries; i++)
2761 		setup_dca_notifier(dd, i);
2762 }
2763 
2764 static void qib_irq_notifier_notify(struct irq_affinity_notify *notify,
2765 			     const cpumask_t *mask)
2766 {
2767 	struct qib_irq_notify *n =
2768 		container_of(notify, struct qib_irq_notify, notify);
2769 	int cpu = cpumask_first(mask);
2770 
2771 	if (n->rcv) {
2772 		struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg;
2773 
2774 		qib_update_rhdrq_dca(rcd, cpu);
2775 	} else {
2776 		struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg;
2777 
2778 		qib_update_sdma_dca(ppd, cpu);
2779 	}
2780 }
2781 
2782 static void qib_irq_notifier_release(struct kref *ref)
2783 {
2784 	struct qib_irq_notify *n =
2785 		container_of(ref, struct qib_irq_notify, notify.kref);
2786 	struct qib_devdata *dd;
2787 
2788 	if (n->rcv) {
2789 		struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg;
2790 
2791 		dd = rcd->dd;
2792 	} else {
2793 		struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg;
2794 
2795 		dd = ppd->dd;
2796 	}
2797 	qib_devinfo(dd->pcidev,
2798 		"release on HCA notify 0x%p n 0x%p\n", ref, n);
2799 	kfree(n);
2800 }
2801 #endif
2802 
2803 static void qib_7322_free_irq(struct qib_devdata *dd)
2804 {
2805 	u64 intgranted;
2806 	int i;
2807 
2808 	dd->cspec->main_int_mask = ~0ULL;
2809 
2810 	for (i = 0; i < dd->cspec->num_msix_entries; i++) {
2811 		/* only free IRQs that were allocated */
2812 		if (dd->cspec->msix_entries[i].arg) {
2813 #ifdef CONFIG_INFINIBAND_QIB_DCA
2814 			reset_dca_notifier(dd, i);
2815 #endif
2816 			irq_set_affinity_hint(pci_irq_vector(dd->pcidev, i),
2817 					      NULL);
2818 			free_cpumask_var(dd->cspec->msix_entries[i].mask);
2819 			pci_free_irq(dd->pcidev, i,
2820 				     dd->cspec->msix_entries[i].arg);
2821 		}
2822 	}
2823 
2824 	/* If num_msix_entries was 0, disable the INTx IRQ */
2825 	if (!dd->cspec->num_msix_entries)
2826 		pci_free_irq(dd->pcidev, 0, dd);
2827 	else
2828 		dd->cspec->num_msix_entries = 0;
2829 
2830 	pci_free_irq_vectors(dd->pcidev);
2831 
2832 	/* make sure no MSIx interrupts are left pending */
2833 	intgranted = qib_read_kreg64(dd, kr_intgranted);
2834 	if (intgranted)
2835 		qib_write_kreg(dd, kr_intgranted, intgranted);
2836 }
2837 
2838 static void qib_setup_7322_cleanup(struct qib_devdata *dd)
2839 {
2840 	int i;
2841 
2842 #ifdef CONFIG_INFINIBAND_QIB_DCA
2843 	if (dd->flags & QIB_DCA_ENABLED) {
2844 		dca_remove_requester(&dd->pcidev->dev);
2845 		dd->flags &= ~QIB_DCA_ENABLED;
2846 		dd->cspec->dca_ctrl = 0;
2847 		qib_write_kreg(dd, KREG_IDX(DCACtrlA), dd->cspec->dca_ctrl);
2848 	}
2849 #endif
2850 
2851 	qib_7322_free_irq(dd);
2852 	kfree(dd->cspec->cntrs);
2853 	kfree(dd->cspec->sendchkenable);
2854 	kfree(dd->cspec->sendgrhchk);
2855 	kfree(dd->cspec->sendibchk);
2856 	kfree(dd->cspec->msix_entries);
2857 	for (i = 0; i < dd->num_pports; i++) {
2858 		unsigned long flags;
2859 		u32 mask = QSFP_GPIO_MOD_PRS_N |
2860 			(QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT);
2861 
2862 		kfree(dd->pport[i].cpspec->portcntrs);
2863 		if (dd->flags & QIB_HAS_QSFP) {
2864 			spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
2865 			dd->cspec->gpio_mask &= ~mask;
2866 			qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
2867 			spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
2868 		}
2869 	}
2870 }
2871 
2872 /* handle SDMA interrupts */
2873 static void sdma_7322_intr(struct qib_devdata *dd, u64 istat)
2874 {
2875 	struct qib_pportdata *ppd0 = &dd->pport[0];
2876 	struct qib_pportdata *ppd1 = &dd->pport[1];
2877 	u64 intr0 = istat & (INT_MASK_P(SDma, 0) |
2878 		INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0));
2879 	u64 intr1 = istat & (INT_MASK_P(SDma, 1) |
2880 		INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1));
2881 
2882 	if (intr0)
2883 		qib_sdma_intr(ppd0);
2884 	if (intr1)
2885 		qib_sdma_intr(ppd1);
2886 
2887 	if (istat & INT_MASK_PM(SDmaCleanupDone, 0))
2888 		qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started);
2889 	if (istat & INT_MASK_PM(SDmaCleanupDone, 1))
2890 		qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started);
2891 }
2892 
2893 /*
2894  * Set or clear the Send buffer available interrupt enable bit.
2895  */
2896 static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint)
2897 {
2898 	unsigned long flags;
2899 
2900 	spin_lock_irqsave(&dd->sendctrl_lock, flags);
2901 	if (needint)
2902 		dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail);
2903 	else
2904 		dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail);
2905 	qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
2906 	qib_write_kreg(dd, kr_scratch, 0ULL);
2907 	spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
2908 }
2909 
2910 /*
2911  * Somehow got an interrupt with reserved bits set in interrupt status.
2912  * Print a message so we know it happened, then clear them.
2913  * keep mainline interrupt handler cache-friendly
2914  */
2915 static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat)
2916 {
2917 	u64 kills;
2918 	char msg[128];
2919 
2920 	kills = istat & ~QIB_I_BITSEXTANT;
2921 	qib_dev_err(dd,
2922 		"Clearing reserved interrupt(s) 0x%016llx: %s\n",
2923 		(unsigned long long) kills, msg);
2924 	qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills));
2925 }
2926 
2927 /* keep mainline interrupt handler cache-friendly */
2928 static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd)
2929 {
2930 	u32 gpiostatus;
2931 	int handled = 0;
2932 	int pidx;
2933 
2934 	/*
2935 	 * Boards for this chip currently don't use GPIO interrupts,
2936 	 * so clear by writing GPIOstatus to GPIOclear, and complain
2937 	 * to developer.  To avoid endless repeats, clear
2938 	 * the bits in the mask, since there is some kind of
2939 	 * programming error or chip problem.
2940 	 */
2941 	gpiostatus = qib_read_kreg32(dd, kr_gpio_status);
2942 	/*
2943 	 * In theory, writing GPIOstatus to GPIOclear could
2944 	 * have a bad side-effect on some diagnostic that wanted
2945 	 * to poll for a status-change, but the various shadows
2946 	 * make that problematic at best. Diags will just suppress
2947 	 * all GPIO interrupts during such tests.
2948 	 */
2949 	qib_write_kreg(dd, kr_gpio_clear, gpiostatus);
2950 	/*
2951 	 * Check for QSFP MOD_PRS changes
2952 	 * only works for single port if IB1 != pidx1
2953 	 */
2954 	for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP);
2955 	     ++pidx) {
2956 		struct qib_pportdata *ppd;
2957 		struct qib_qsfp_data *qd;
2958 		u32 mask;
2959 
2960 		if (!dd->pport[pidx].link_speed_supported)
2961 			continue;
2962 		mask = QSFP_GPIO_MOD_PRS_N;
2963 		ppd = dd->pport + pidx;
2964 		mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx);
2965 		if (gpiostatus & dd->cspec->gpio_mask & mask) {
2966 			u64 pins;
2967 
2968 			qd = &ppd->cpspec->qsfp_data;
2969 			gpiostatus &= ~mask;
2970 			pins = qib_read_kreg64(dd, kr_extstatus);
2971 			pins >>= SYM_LSB(EXTStatus, GPIOIn);
2972 			if (!(pins & mask)) {
2973 				++handled;
2974 				qd->t_insert = jiffies;
2975 				queue_work(ib_wq, &qd->work);
2976 			}
2977 		}
2978 	}
2979 
2980 	if (gpiostatus && !handled) {
2981 		const u32 mask = qib_read_kreg32(dd, kr_gpio_mask);
2982 		u32 gpio_irq = mask & gpiostatus;
2983 
2984 		/*
2985 		 * Clear any troublemakers, and update chip from shadow
2986 		 */
2987 		dd->cspec->gpio_mask &= ~gpio_irq;
2988 		qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
2989 	}
2990 }
2991 
2992 /*
2993  * Handle errors and unusual events first, separate function
2994  * to improve cache hits for fast path interrupt handling.
2995  */
2996 static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat)
2997 {
2998 	if (istat & ~QIB_I_BITSEXTANT)
2999 		unknown_7322_ibits(dd, istat);
3000 	if (istat & QIB_I_GPIO)
3001 		unknown_7322_gpio_intr(dd);
3002 	if (istat & QIB_I_C_ERROR) {
3003 		qib_write_kreg(dd, kr_errmask, 0ULL);
3004 		tasklet_schedule(&dd->error_tasklet);
3005 	}
3006 	if (istat & INT_MASK_P(Err, 0) && dd->rcd[0])
3007 		handle_7322_p_errors(dd->rcd[0]->ppd);
3008 	if (istat & INT_MASK_P(Err, 1) && dd->rcd[1])
3009 		handle_7322_p_errors(dd->rcd[1]->ppd);
3010 }
3011 
3012 /*
3013  * Dynamically adjust the rcv int timeout for a context based on incoming
3014  * packet rate.
3015  */
3016 static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts)
3017 {
3018 	struct qib_devdata *dd = rcd->dd;
3019 	u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt];
3020 
3021 	/*
3022 	 * Dynamically adjust idle timeout on chip
3023 	 * based on number of packets processed.
3024 	 */
3025 	if (npkts < rcv_int_count && timeout > 2)
3026 		timeout >>= 1;
3027 	else if (npkts >= rcv_int_count && timeout < rcv_int_timeout)
3028 		timeout = min(timeout << 1, rcv_int_timeout);
3029 	else
3030 		return;
3031 
3032 	dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout;
3033 	qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout);
3034 }
3035 
3036 /*
3037  * This is the main interrupt handler.
3038  * It will normally only be used for low frequency interrupts but may
3039  * have to handle all interrupts if INTx is enabled or fewer than normal
3040  * MSIx interrupts were allocated.
3041  * This routine should ignore the interrupt bits for any of the
3042  * dedicated MSIx handlers.
3043  */
3044 static irqreturn_t qib_7322intr(int irq, void *data)
3045 {
3046 	struct qib_devdata *dd = data;
3047 	irqreturn_t ret;
3048 	u64 istat;
3049 	u64 ctxtrbits;
3050 	u64 rmask;
3051 	unsigned i;
3052 	u32 npkts;
3053 
3054 	if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) {
3055 		/*
3056 		 * This return value is not great, but we do not want the
3057 		 * interrupt core code to remove our interrupt handler
3058 		 * because we don't appear to be handling an interrupt
3059 		 * during a chip reset.
3060 		 */
3061 		ret = IRQ_HANDLED;
3062 		goto bail;
3063 	}
3064 
3065 	istat = qib_read_kreg64(dd, kr_intstatus);
3066 
3067 	if (unlikely(istat == ~0ULL)) {
3068 		qib_bad_intrstatus(dd);
3069 		qib_dev_err(dd, "Interrupt status all f's, skipping\n");
3070 		/* don't know if it was our interrupt or not */
3071 		ret = IRQ_NONE;
3072 		goto bail;
3073 	}
3074 
3075 	istat &= dd->cspec->main_int_mask;
3076 	if (unlikely(!istat)) {
3077 		/* already handled, or shared and not us */
3078 		ret = IRQ_NONE;
3079 		goto bail;
3080 	}
3081 
3082 	this_cpu_inc(*dd->int_counter);
3083 
3084 	/* handle "errors" of various kinds first, device ahead of port */
3085 	if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO |
3086 			      QIB_I_C_ERROR | INT_MASK_P(Err, 0) |
3087 			      INT_MASK_P(Err, 1))))
3088 		unlikely_7322_intr(dd, istat);
3089 
3090 	/*
3091 	 * Clear the interrupt bits we found set, relatively early, so we
3092 	 * "know" know the chip will have seen this by the time we process
3093 	 * the queue, and will re-interrupt if necessary.  The processor
3094 	 * itself won't take the interrupt again until we return.
3095 	 */
3096 	qib_write_kreg(dd, kr_intclear, istat);
3097 
3098 	/*
3099 	 * Handle kernel receive queues before checking for pio buffers
3100 	 * available since receives can overflow; piobuf waiters can afford
3101 	 * a few extra cycles, since they were waiting anyway.
3102 	 */
3103 	ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK);
3104 	if (ctxtrbits) {
3105 		rmask = (1ULL << QIB_I_RCVAVAIL_LSB) |
3106 			(1ULL << QIB_I_RCVURG_LSB);
3107 		for (i = 0; i < dd->first_user_ctxt; i++) {
3108 			if (ctxtrbits & rmask) {
3109 				ctxtrbits &= ~rmask;
3110 				if (dd->rcd[i])
3111 					qib_kreceive(dd->rcd[i], NULL, &npkts);
3112 			}
3113 			rmask <<= 1;
3114 		}
3115 		if (ctxtrbits) {
3116 			ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) |
3117 				(ctxtrbits >> QIB_I_RCVURG_LSB);
3118 			qib_handle_urcv(dd, ctxtrbits);
3119 		}
3120 	}
3121 
3122 	if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1)))
3123 		sdma_7322_intr(dd, istat);
3124 
3125 	if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED))
3126 		qib_ib_piobufavail(dd);
3127 
3128 	ret = IRQ_HANDLED;
3129 bail:
3130 	return ret;
3131 }
3132 
3133 /*
3134  * Dedicated receive packet available interrupt handler.
3135  */
3136 static irqreturn_t qib_7322pintr(int irq, void *data)
3137 {
3138 	struct qib_ctxtdata *rcd = data;
3139 	struct qib_devdata *dd = rcd->dd;
3140 	u32 npkts;
3141 
3142 	if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3143 		/*
3144 		 * This return value is not great, but we do not want the
3145 		 * interrupt core code to remove our interrupt handler
3146 		 * because we don't appear to be handling an interrupt
3147 		 * during a chip reset.
3148 		 */
3149 		return IRQ_HANDLED;
3150 
3151 	this_cpu_inc(*dd->int_counter);
3152 
3153 	/* Clear the interrupt bit we expect to be set. */
3154 	qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) |
3155 		       (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt);
3156 
3157 	qib_kreceive(rcd, NULL, &npkts);
3158 
3159 	return IRQ_HANDLED;
3160 }
3161 
3162 /*
3163  * Dedicated Send buffer available interrupt handler.
3164  */
3165 static irqreturn_t qib_7322bufavail(int irq, void *data)
3166 {
3167 	struct qib_devdata *dd = data;
3168 
3169 	if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3170 		/*
3171 		 * This return value is not great, but we do not want the
3172 		 * interrupt core code to remove our interrupt handler
3173 		 * because we don't appear to be handling an interrupt
3174 		 * during a chip reset.
3175 		 */
3176 		return IRQ_HANDLED;
3177 
3178 	this_cpu_inc(*dd->int_counter);
3179 
3180 	/* Clear the interrupt bit we expect to be set. */
3181 	qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL);
3182 
3183 	/* qib_ib_piobufavail() will clear the want PIO interrupt if needed */
3184 	if (dd->flags & QIB_INITTED)
3185 		qib_ib_piobufavail(dd);
3186 	else
3187 		qib_wantpiobuf_7322_intr(dd, 0);
3188 
3189 	return IRQ_HANDLED;
3190 }
3191 
3192 /*
3193  * Dedicated Send DMA interrupt handler.
3194  */
3195 static irqreturn_t sdma_intr(int irq, void *data)
3196 {
3197 	struct qib_pportdata *ppd = data;
3198 	struct qib_devdata *dd = ppd->dd;
3199 
3200 	if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3201 		/*
3202 		 * This return value is not great, but we do not want the
3203 		 * interrupt core code to remove our interrupt handler
3204 		 * because we don't appear to be handling an interrupt
3205 		 * during a chip reset.
3206 		 */
3207 		return IRQ_HANDLED;
3208 
3209 	this_cpu_inc(*dd->int_counter);
3210 
3211 	/* Clear the interrupt bit we expect to be set. */
3212 	qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
3213 		       INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0));
3214 	qib_sdma_intr(ppd);
3215 
3216 	return IRQ_HANDLED;
3217 }
3218 
3219 /*
3220  * Dedicated Send DMA idle interrupt handler.
3221  */
3222 static irqreturn_t sdma_idle_intr(int irq, void *data)
3223 {
3224 	struct qib_pportdata *ppd = data;
3225 	struct qib_devdata *dd = ppd->dd;
3226 
3227 	if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3228 		/*
3229 		 * This return value is not great, but we do not want the
3230 		 * interrupt core code to remove our interrupt handler
3231 		 * because we don't appear to be handling an interrupt
3232 		 * during a chip reset.
3233 		 */
3234 		return IRQ_HANDLED;
3235 
3236 	this_cpu_inc(*dd->int_counter);
3237 
3238 	/* Clear the interrupt bit we expect to be set. */
3239 	qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
3240 		       INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0));
3241 	qib_sdma_intr(ppd);
3242 
3243 	return IRQ_HANDLED;
3244 }
3245 
3246 /*
3247  * Dedicated Send DMA progress interrupt handler.
3248  */
3249 static irqreturn_t sdma_progress_intr(int irq, void *data)
3250 {
3251 	struct qib_pportdata *ppd = data;
3252 	struct qib_devdata *dd = ppd->dd;
3253 
3254 	if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3255 		/*
3256 		 * This return value is not great, but we do not want the
3257 		 * interrupt core code to remove our interrupt handler
3258 		 * because we don't appear to be handling an interrupt
3259 		 * during a chip reset.
3260 		 */
3261 		return IRQ_HANDLED;
3262 
3263 	this_cpu_inc(*dd->int_counter);
3264 
3265 	/* Clear the interrupt bit we expect to be set. */
3266 	qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
3267 		       INT_MASK_P(SDmaProgress, 1) :
3268 		       INT_MASK_P(SDmaProgress, 0));
3269 	qib_sdma_intr(ppd);
3270 
3271 	return IRQ_HANDLED;
3272 }
3273 
3274 /*
3275  * Dedicated Send DMA cleanup interrupt handler.
3276  */
3277 static irqreturn_t sdma_cleanup_intr(int irq, void *data)
3278 {
3279 	struct qib_pportdata *ppd = data;
3280 	struct qib_devdata *dd = ppd->dd;
3281 
3282 	if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3283 		/*
3284 		 * This return value is not great, but we do not want the
3285 		 * interrupt core code to remove our interrupt handler
3286 		 * because we don't appear to be handling an interrupt
3287 		 * during a chip reset.
3288 		 */
3289 		return IRQ_HANDLED;
3290 
3291 	this_cpu_inc(*dd->int_counter);
3292 
3293 	/* Clear the interrupt bit we expect to be set. */
3294 	qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
3295 		       INT_MASK_PM(SDmaCleanupDone, 1) :
3296 		       INT_MASK_PM(SDmaCleanupDone, 0));
3297 	qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started);
3298 
3299 	return IRQ_HANDLED;
3300 }
3301 
3302 #ifdef CONFIG_INFINIBAND_QIB_DCA
3303 
3304 static void reset_dca_notifier(struct qib_devdata *dd, int msixnum)
3305 {
3306 	if (!dd->cspec->msix_entries[msixnum].dca)
3307 		return;
3308 
3309 	qib_devinfo(dd->pcidev, "Disabling notifier on HCA %d irq %d\n",
3310 		    dd->unit, pci_irq_vector(dd->pcidev, msixnum));
3311 	irq_set_affinity_notifier(pci_irq_vector(dd->pcidev, msixnum), NULL);
3312 	dd->cspec->msix_entries[msixnum].notifier = NULL;
3313 }
3314 
3315 static void setup_dca_notifier(struct qib_devdata *dd, int msixnum)
3316 {
3317 	struct qib_msix_entry *m = &dd->cspec->msix_entries[msixnum];
3318 	struct qib_irq_notify *n;
3319 
3320 	if (!m->dca)
3321 		return;
3322 	n = kzalloc(sizeof(*n), GFP_KERNEL);
3323 	if (n) {
3324 		int ret;
3325 
3326 		m->notifier = n;
3327 		n->notify.irq = pci_irq_vector(dd->pcidev, msixnum);
3328 		n->notify.notify = qib_irq_notifier_notify;
3329 		n->notify.release = qib_irq_notifier_release;
3330 		n->arg = m->arg;
3331 		n->rcv = m->rcv;
3332 		qib_devinfo(dd->pcidev,
3333 			"set notifier irq %d rcv %d notify %p\n",
3334 			n->notify.irq, n->rcv, &n->notify);
3335 		ret = irq_set_affinity_notifier(
3336 				n->notify.irq,
3337 				&n->notify);
3338 		if (ret) {
3339 			m->notifier = NULL;
3340 			kfree(n);
3341 		}
3342 	}
3343 }
3344 
3345 #endif
3346 
3347 /*
3348  * Set up our chip-specific interrupt handler.
3349  * The interrupt type has already been setup, so
3350  * we just need to do the registration and error checking.
3351  * If we are using MSIx interrupts, we may fall back to
3352  * INTx later, if the interrupt handler doesn't get called
3353  * within 1/2 second (see verify_interrupt()).
3354  */
3355 static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend)
3356 {
3357 	int ret, i, msixnum;
3358 	u64 redirect[6];
3359 	u64 mask;
3360 	const struct cpumask *local_mask;
3361 	int firstcpu, secondcpu = 0, currrcvcpu = 0;
3362 
3363 	if (!dd->num_pports)
3364 		return;
3365 
3366 	if (clearpend) {
3367 		/*
3368 		 * if not switching interrupt types, be sure interrupts are
3369 		 * disabled, and then clear anything pending at this point,
3370 		 * because we are starting clean.
3371 		 */
3372 		qib_7322_set_intr_state(dd, 0);
3373 
3374 		/* clear the reset error, init error/hwerror mask */
3375 		qib_7322_init_hwerrors(dd);
3376 
3377 		/* clear any interrupt bits that might be set */
3378 		qib_write_kreg(dd, kr_intclear, ~0ULL);
3379 
3380 		/* make sure no pending MSIx intr, and clear diag reg */
3381 		qib_write_kreg(dd, kr_intgranted, ~0ULL);
3382 		qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL);
3383 	}
3384 
3385 	if (!dd->cspec->num_msix_entries) {
3386 		/* Try to get INTx interrupt */
3387 try_intx:
3388 		ret = pci_request_irq(dd->pcidev, 0, qib_7322intr, NULL, dd,
3389 				      QIB_DRV_NAME);
3390 		if (ret) {
3391 			qib_dev_err(
3392 				dd,
3393 				"Couldn't setup INTx interrupt (irq=%d): %d\n",
3394 				pci_irq_vector(dd->pcidev, 0), ret);
3395 			return;
3396 		}
3397 		dd->cspec->main_int_mask = ~0ULL;
3398 		return;
3399 	}
3400 
3401 	/* Try to get MSIx interrupts */
3402 	memset(redirect, 0, sizeof(redirect));
3403 	mask = ~0ULL;
3404 	msixnum = 0;
3405 	local_mask = cpumask_of_pcibus(dd->pcidev->bus);
3406 	firstcpu = cpumask_first(local_mask);
3407 	if (firstcpu >= nr_cpu_ids ||
3408 			cpumask_weight(local_mask) == num_online_cpus()) {
3409 		local_mask = topology_core_cpumask(0);
3410 		firstcpu = cpumask_first(local_mask);
3411 	}
3412 	if (firstcpu < nr_cpu_ids) {
3413 		secondcpu = cpumask_next(firstcpu, local_mask);
3414 		if (secondcpu >= nr_cpu_ids)
3415 			secondcpu = firstcpu;
3416 		currrcvcpu = secondcpu;
3417 	}
3418 	for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) {
3419 		irq_handler_t handler;
3420 		void *arg;
3421 		int lsb, reg, sh;
3422 #ifdef CONFIG_INFINIBAND_QIB_DCA
3423 		int dca = 0;
3424 #endif
3425 		if (i < ARRAY_SIZE(irq_table)) {
3426 			if (irq_table[i].port) {
3427 				/* skip if for a non-configured port */
3428 				if (irq_table[i].port > dd->num_pports)
3429 					continue;
3430 				arg = dd->pport + irq_table[i].port - 1;
3431 			} else
3432 				arg = dd;
3433 #ifdef CONFIG_INFINIBAND_QIB_DCA
3434 			dca = irq_table[i].dca;
3435 #endif
3436 			lsb = irq_table[i].lsb;
3437 			handler = irq_table[i].handler;
3438 			ret = pci_request_irq(dd->pcidev, msixnum, handler,
3439 					      NULL, arg, QIB_DRV_NAME "%d%s",
3440 					      dd->unit,
3441 					      irq_table[i].name);
3442 		} else {
3443 			unsigned ctxt;
3444 
3445 			ctxt = i - ARRAY_SIZE(irq_table);
3446 			/* per krcvq context receive interrupt */
3447 			arg = dd->rcd[ctxt];
3448 			if (!arg)
3449 				continue;
3450 			if (qib_krcvq01_no_msi && ctxt < 2)
3451 				continue;
3452 #ifdef CONFIG_INFINIBAND_QIB_DCA
3453 			dca = 1;
3454 #endif
3455 			lsb = QIB_I_RCVAVAIL_LSB + ctxt;
3456 			handler = qib_7322pintr;
3457 			ret = pci_request_irq(dd->pcidev, msixnum, handler,
3458 					      NULL, arg,
3459 					      QIB_DRV_NAME "%d (kctx)",
3460 					      dd->unit);
3461 		}
3462 
3463 		if (ret) {
3464 			/*
3465 			 * Shouldn't happen since the enable said we could
3466 			 * have as many as we are trying to setup here.
3467 			 */
3468 			qib_dev_err(dd,
3469 				    "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n",
3470 				    msixnum,
3471 				    pci_irq_vector(dd->pcidev, msixnum),
3472 				    ret);
3473 			qib_7322_free_irq(dd);
3474 			pci_alloc_irq_vectors(dd->pcidev, 1, 1,
3475 					      PCI_IRQ_LEGACY);
3476 			goto try_intx;
3477 		}
3478 		dd->cspec->msix_entries[msixnum].arg = arg;
3479 #ifdef CONFIG_INFINIBAND_QIB_DCA
3480 		dd->cspec->msix_entries[msixnum].dca = dca;
3481 		dd->cspec->msix_entries[msixnum].rcv =
3482 			handler == qib_7322pintr;
3483 #endif
3484 		if (lsb >= 0) {
3485 			reg = lsb / IBA7322_REDIRECT_VEC_PER_REG;
3486 			sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) *
3487 				SYM_LSB(IntRedirect0, vec1);
3488 			mask &= ~(1ULL << lsb);
3489 			redirect[reg] |= ((u64) msixnum) << sh;
3490 		}
3491 		qib_read_kreg64(dd, 2 * msixnum + 1 +
3492 				(QIB_7322_MsixTable_OFFS / sizeof(u64)));
3493 		if (firstcpu < nr_cpu_ids &&
3494 			zalloc_cpumask_var(
3495 				&dd->cspec->msix_entries[msixnum].mask,
3496 				GFP_KERNEL)) {
3497 			if (handler == qib_7322pintr) {
3498 				cpumask_set_cpu(currrcvcpu,
3499 					dd->cspec->msix_entries[msixnum].mask);
3500 				currrcvcpu = cpumask_next(currrcvcpu,
3501 					local_mask);
3502 				if (currrcvcpu >= nr_cpu_ids)
3503 					currrcvcpu = secondcpu;
3504 			} else {
3505 				cpumask_set_cpu(firstcpu,
3506 					dd->cspec->msix_entries[msixnum].mask);
3507 			}
3508 			irq_set_affinity_hint(
3509 				pci_irq_vector(dd->pcidev, msixnum),
3510 				dd->cspec->msix_entries[msixnum].mask);
3511 		}
3512 		msixnum++;
3513 	}
3514 	/* Initialize the vector mapping */
3515 	for (i = 0; i < ARRAY_SIZE(redirect); i++)
3516 		qib_write_kreg(dd, kr_intredirect + i, redirect[i]);
3517 	dd->cspec->main_int_mask = mask;
3518 	tasklet_setup(&dd->error_tasklet, qib_error_tasklet);
3519 }
3520 
3521 /**
3522  * qib_7322_boardname - fill in the board name and note features
3523  * @dd: the qlogic_ib device
3524  *
3525  * info will be based on the board revision register
3526  */
3527 static unsigned qib_7322_boardname(struct qib_devdata *dd)
3528 {
3529 	/* Will need enumeration of board-types here */
3530 	u32 boardid;
3531 	unsigned int features = DUAL_PORT_CAP;
3532 
3533 	boardid = SYM_FIELD(dd->revision, Revision, BoardID);
3534 
3535 	switch (boardid) {
3536 	case 0:
3537 		dd->boardname = "InfiniPath_QLE7342_Emulation";
3538 		break;
3539 	case 1:
3540 		dd->boardname = "InfiniPath_QLE7340";
3541 		dd->flags |= QIB_HAS_QSFP;
3542 		features = PORT_SPD_CAP;
3543 		break;
3544 	case 2:
3545 		dd->boardname = "InfiniPath_QLE7342";
3546 		dd->flags |= QIB_HAS_QSFP;
3547 		break;
3548 	case 3:
3549 		dd->boardname = "InfiniPath_QMI7342";
3550 		break;
3551 	case 4:
3552 		dd->boardname = "InfiniPath_Unsupported7342";
3553 		qib_dev_err(dd, "Unsupported version of QMH7342\n");
3554 		features = 0;
3555 		break;
3556 	case BOARD_QMH7342:
3557 		dd->boardname = "InfiniPath_QMH7342";
3558 		features = 0x24;
3559 		break;
3560 	case BOARD_QME7342:
3561 		dd->boardname = "InfiniPath_QME7342";
3562 		break;
3563 	case 8:
3564 		dd->boardname = "InfiniPath_QME7362";
3565 		dd->flags |= QIB_HAS_QSFP;
3566 		break;
3567 	case BOARD_QMH7360:
3568 		dd->boardname = "Intel IB QDR 1P FLR-QSFP Adptr";
3569 		dd->flags |= QIB_HAS_QSFP;
3570 		break;
3571 	case 15:
3572 		dd->boardname = "InfiniPath_QLE7342_TEST";
3573 		dd->flags |= QIB_HAS_QSFP;
3574 		break;
3575 	default:
3576 		dd->boardname = "InfiniPath_QLE73xy_UNKNOWN";
3577 		qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid);
3578 		break;
3579 	}
3580 	dd->board_atten = 1; /* index into txdds_Xdr */
3581 
3582 	snprintf(dd->boardversion, sizeof(dd->boardversion),
3583 		 "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
3584 		 QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname,
3585 		 (unsigned int)SYM_FIELD(dd->revision, Revision_R, Arch),
3586 		 dd->majrev, dd->minrev,
3587 		 (unsigned int)SYM_FIELD(dd->revision, Revision_R, SW));
3588 
3589 	if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) {
3590 		qib_devinfo(dd->pcidev,
3591 			    "IB%u: Forced to single port mode by module parameter\n",
3592 			    dd->unit);
3593 		features &= PORT_SPD_CAP;
3594 	}
3595 
3596 	return features;
3597 }
3598 
3599 /*
3600  * This routine sleeps, so it can only be called from user context, not
3601  * from interrupt context.
3602  */
3603 static int qib_do_7322_reset(struct qib_devdata *dd)
3604 {
3605 	u64 val;
3606 	u64 *msix_vecsave = NULL;
3607 	int i, msix_entries, ret = 1;
3608 	u16 cmdval;
3609 	u8 int_line, clinesz;
3610 	unsigned long flags;
3611 
3612 	/* Use dev_err so it shows up in logs, etc. */
3613 	qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit);
3614 
3615 	qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz);
3616 
3617 	msix_entries = dd->cspec->num_msix_entries;
3618 
3619 	/* no interrupts till re-initted */
3620 	qib_7322_set_intr_state(dd, 0);
3621 
3622 	qib_7322_free_irq(dd);
3623 
3624 	if (msix_entries) {
3625 		/* can be up to 512 bytes, too big for stack */
3626 		msix_vecsave = kmalloc_array(2 * dd->cspec->num_msix_entries,
3627 					     sizeof(u64),
3628 					     GFP_KERNEL);
3629 	}
3630 
3631 	/*
3632 	 * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector
3633 	 * info that is set up by the BIOS, so we have to save and restore
3634 	 * it ourselves.   There is some risk something could change it,
3635 	 * after we save it, but since we have disabled the MSIx, it
3636 	 * shouldn't be touched...
3637 	 */
3638 	for (i = 0; i < msix_entries; i++) {
3639 		u64 vecaddr, vecdata;
3640 
3641 		vecaddr = qib_read_kreg64(dd, 2 * i +
3642 				  (QIB_7322_MsixTable_OFFS / sizeof(u64)));
3643 		vecdata = qib_read_kreg64(dd, 1 + 2 * i +
3644 				  (QIB_7322_MsixTable_OFFS / sizeof(u64)));
3645 		if (msix_vecsave) {
3646 			msix_vecsave[2 * i] = vecaddr;
3647 			/* save it without the masked bit set */
3648 			msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL;
3649 		}
3650 	}
3651 
3652 	dd->pport->cpspec->ibdeltainprog = 0;
3653 	dd->pport->cpspec->ibsymdelta = 0;
3654 	dd->pport->cpspec->iblnkerrdelta = 0;
3655 	dd->pport->cpspec->ibmalfdelta = 0;
3656 	/* so we check interrupts work again */
3657 	dd->z_int_counter = qib_int_counter(dd);
3658 
3659 	/*
3660 	 * Keep chip from being accessed until we are ready.  Use
3661 	 * writeq() directly, to allow the write even though QIB_PRESENT
3662 	 * isn't set.
3663 	 */
3664 	dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR);
3665 	dd->flags |= QIB_DOING_RESET;
3666 	val = dd->control | QLOGIC_IB_C_RESET;
3667 	writeq(val, &dd->kregbase[kr_control]);
3668 
3669 	for (i = 1; i <= 5; i++) {
3670 		/*
3671 		 * Allow MBIST, etc. to complete; longer on each retry.
3672 		 * We sometimes get machine checks from bus timeout if no
3673 		 * response, so for now, make it *really* long.
3674 		 */
3675 		msleep(1000 + (1 + i) * 3000);
3676 
3677 		qib_pcie_reenable(dd, cmdval, int_line, clinesz);
3678 
3679 		/*
3680 		 * Use readq directly, so we don't need to mark it as PRESENT
3681 		 * until we get a successful indication that all is well.
3682 		 */
3683 		val = readq(&dd->kregbase[kr_revision]);
3684 		if (val == dd->revision)
3685 			break;
3686 		if (i == 5) {
3687 			qib_dev_err(dd,
3688 				"Failed to initialize after reset, unusable\n");
3689 			ret = 0;
3690 			goto  bail;
3691 		}
3692 	}
3693 
3694 	dd->flags |= QIB_PRESENT; /* it's back */
3695 
3696 	if (msix_entries) {
3697 		/* restore the MSIx vector address and data if saved above */
3698 		for (i = 0; i < msix_entries; i++) {
3699 			if (!msix_vecsave || !msix_vecsave[2 * i])
3700 				continue;
3701 			qib_write_kreg(dd, 2 * i +
3702 				(QIB_7322_MsixTable_OFFS / sizeof(u64)),
3703 				msix_vecsave[2 * i]);
3704 			qib_write_kreg(dd, 1 + 2 * i +
3705 				(QIB_7322_MsixTable_OFFS / sizeof(u64)),
3706 				msix_vecsave[1 + 2 * i]);
3707 		}
3708 	}
3709 
3710 	/* initialize the remaining registers.  */
3711 	for (i = 0; i < dd->num_pports; ++i)
3712 		write_7322_init_portregs(&dd->pport[i]);
3713 	write_7322_initregs(dd);
3714 
3715 	if (qib_pcie_params(dd, dd->lbus_width, &msix_entries))
3716 		qib_dev_err(dd,
3717 			"Reset failed to setup PCIe or interrupts; continuing anyway\n");
3718 
3719 	dd->cspec->num_msix_entries = msix_entries;
3720 	qib_setup_7322_interrupt(dd, 1);
3721 
3722 	for (i = 0; i < dd->num_pports; ++i) {
3723 		struct qib_pportdata *ppd = &dd->pport[i];
3724 
3725 		spin_lock_irqsave(&ppd->lflags_lock, flags);
3726 		ppd->lflags |= QIBL_IB_FORCE_NOTIFY;
3727 		ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
3728 		spin_unlock_irqrestore(&ppd->lflags_lock, flags);
3729 	}
3730 
3731 bail:
3732 	dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */
3733 	kfree(msix_vecsave);
3734 	return ret;
3735 }
3736 
3737 /**
3738  * qib_7322_put_tid - write a TID to the chip
3739  * @dd: the qlogic_ib device
3740  * @tidptr: pointer to the expected TID (in chip) to update
3741  * @type: 0 for eager, 1 for expected
3742  * @pa: physical address of in memory buffer; tidinvalid if freeing
3743  */
3744 static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr,
3745 			     u32 type, unsigned long pa)
3746 {
3747 	if (!(dd->flags & QIB_PRESENT))
3748 		return;
3749 	if (pa != dd->tidinvalid) {
3750 		u64 chippa = pa >> IBA7322_TID_PA_SHIFT;
3751 
3752 		/* paranoia checks */
3753 		if (pa != (chippa << IBA7322_TID_PA_SHIFT)) {
3754 			qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n",
3755 				    pa);
3756 			return;
3757 		}
3758 		if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) {
3759 			qib_dev_err(dd,
3760 				"Physical page address 0x%lx larger than supported\n",
3761 				pa);
3762 			return;
3763 		}
3764 
3765 		if (type == RCVHQ_RCV_TYPE_EAGER)
3766 			chippa |= dd->tidtemplate;
3767 		else /* for now, always full 4KB page */
3768 			chippa |= IBA7322_TID_SZ_4K;
3769 		pa = chippa;
3770 	}
3771 	writeq(pa, tidptr);
3772 }
3773 
3774 /**
3775  * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager
3776  * @dd: the qlogic_ib device
3777  * @rcd: the ctxt
3778  *
3779  * clear all TID entries for a ctxt, expected and eager.
3780  * Used from qib_close().
3781  */
3782 static void qib_7322_clear_tids(struct qib_devdata *dd,
3783 				struct qib_ctxtdata *rcd)
3784 {
3785 	u64 __iomem *tidbase;
3786 	unsigned long tidinv;
3787 	u32 ctxt;
3788 	int i;
3789 
3790 	if (!dd->kregbase || !rcd)
3791 		return;
3792 
3793 	ctxt = rcd->ctxt;
3794 
3795 	tidinv = dd->tidinvalid;
3796 	tidbase = (u64 __iomem *)
3797 		((char __iomem *) dd->kregbase +
3798 		 dd->rcvtidbase +
3799 		 ctxt * dd->rcvtidcnt * sizeof(*tidbase));
3800 
3801 	for (i = 0; i < dd->rcvtidcnt; i++)
3802 		qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
3803 				 tidinv);
3804 
3805 	tidbase = (u64 __iomem *)
3806 		((char __iomem *) dd->kregbase +
3807 		 dd->rcvegrbase +
3808 		 rcd->rcvegr_tid_base * sizeof(*tidbase));
3809 
3810 	for (i = 0; i < rcd->rcvegrcnt; i++)
3811 		qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
3812 				 tidinv);
3813 }
3814 
3815 /**
3816  * qib_7322_tidtemplate - setup constants for TID updates
3817  * @dd: the qlogic_ib device
3818  *
3819  * We setup stuff that we use a lot, to avoid calculating each time
3820  */
3821 static void qib_7322_tidtemplate(struct qib_devdata *dd)
3822 {
3823 	/*
3824 	 * For now, we always allocate 4KB buffers (at init) so we can
3825 	 * receive max size packets.  We may want a module parameter to
3826 	 * specify 2KB or 4KB and/or make it per port instead of per device
3827 	 * for those who want to reduce memory footprint.  Note that the
3828 	 * rcvhdrentsize size must be large enough to hold the largest
3829 	 * IB header (currently 96 bytes) that we expect to handle (plus of
3830 	 * course the 2 dwords of RHF).
3831 	 */
3832 	if (dd->rcvegrbufsize == 2048)
3833 		dd->tidtemplate = IBA7322_TID_SZ_2K;
3834 	else if (dd->rcvegrbufsize == 4096)
3835 		dd->tidtemplate = IBA7322_TID_SZ_4K;
3836 	dd->tidinvalid = 0;
3837 }
3838 
3839 /**
3840  * qib_7322_get_base_info - set chip-specific flags for user code
3841  * @rcd: the qlogic_ib ctxt
3842  * @kinfo: qib_base_info pointer
3843  *
3844  * We set the PCIE flag because the lower bandwidth on PCIe vs
3845  * HyperTransport can affect some user packet algorithims.
3846  */
3847 
3848 static int qib_7322_get_base_info(struct qib_ctxtdata *rcd,
3849 				  struct qib_base_info *kinfo)
3850 {
3851 	kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP |
3852 		QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL |
3853 		QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA;
3854 	if (rcd->dd->cspec->r1)
3855 		kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK;
3856 	if (rcd->dd->flags & QIB_USE_SPCL_TRIG)
3857 		kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER;
3858 
3859 	return 0;
3860 }
3861 
3862 static struct qib_message_header *
3863 qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr)
3864 {
3865 	u32 offset = qib_hdrget_offset(rhf_addr);
3866 
3867 	return (struct qib_message_header *)
3868 		(rhf_addr - dd->rhf_offset + offset);
3869 }
3870 
3871 /*
3872  * Configure number of contexts.
3873  */
3874 static void qib_7322_config_ctxts(struct qib_devdata *dd)
3875 {
3876 	unsigned long flags;
3877 	u32 nchipctxts;
3878 
3879 	nchipctxts = qib_read_kreg32(dd, kr_contextcnt);
3880 	dd->cspec->numctxts = nchipctxts;
3881 	if (qib_n_krcv_queues > 1 && dd->num_pports) {
3882 		dd->first_user_ctxt = NUM_IB_PORTS +
3883 			(qib_n_krcv_queues - 1) * dd->num_pports;
3884 		if (dd->first_user_ctxt > nchipctxts)
3885 			dd->first_user_ctxt = nchipctxts;
3886 		dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports;
3887 	} else {
3888 		dd->first_user_ctxt = NUM_IB_PORTS;
3889 		dd->n_krcv_queues = 1;
3890 	}
3891 
3892 	if (!qib_cfgctxts) {
3893 		int nctxts = dd->first_user_ctxt + num_online_cpus();
3894 
3895 		if (nctxts <= 6)
3896 			dd->ctxtcnt = 6;
3897 		else if (nctxts <= 10)
3898 			dd->ctxtcnt = 10;
3899 		else if (nctxts <= nchipctxts)
3900 			dd->ctxtcnt = nchipctxts;
3901 	} else if (qib_cfgctxts < dd->num_pports)
3902 		dd->ctxtcnt = dd->num_pports;
3903 	else if (qib_cfgctxts <= nchipctxts)
3904 		dd->ctxtcnt = qib_cfgctxts;
3905 	if (!dd->ctxtcnt) /* none of the above, set to max */
3906 		dd->ctxtcnt = nchipctxts;
3907 
3908 	/*
3909 	 * Chip can be configured for 6, 10, or 18 ctxts, and choice
3910 	 * affects number of eager TIDs per ctxt (1K, 2K, 4K).
3911 	 * Lock to be paranoid about later motion, etc.
3912 	 */
3913 	spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
3914 	if (dd->ctxtcnt > 10)
3915 		dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg);
3916 	else if (dd->ctxtcnt > 6)
3917 		dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg);
3918 	/* else configure for default 6 receive ctxts */
3919 
3920 	/* The XRC opcode is 5. */
3921 	dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode);
3922 
3923 	/*
3924 	 * RcvCtrl *must* be written here so that the
3925 	 * chip understands how to change rcvegrcnt below.
3926 	 */
3927 	qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
3928 	spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
3929 
3930 	/* kr_rcvegrcnt changes based on the number of contexts enabled */
3931 	dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt);
3932 	if (qib_rcvhdrcnt)
3933 		dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, qib_rcvhdrcnt);
3934 	else
3935 		dd->rcvhdrcnt = 2 * max(dd->cspec->rcvegrcnt,
3936 				    dd->num_pports > 1 ? 1024U : 2048U);
3937 }
3938 
3939 static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which)
3940 {
3941 
3942 	int lsb, ret = 0;
3943 	u64 maskr; /* right-justified mask */
3944 
3945 	switch (which) {
3946 
3947 	case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */
3948 		ret = ppd->link_width_enabled;
3949 		goto done;
3950 
3951 	case QIB_IB_CFG_LWID: /* Get currently active Link-width */
3952 		ret = ppd->link_width_active;
3953 		goto done;
3954 
3955 	case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */
3956 		ret = ppd->link_speed_enabled;
3957 		goto done;
3958 
3959 	case QIB_IB_CFG_SPD: /* Get current Link spd */
3960 		ret = ppd->link_speed_active;
3961 		goto done;
3962 
3963 	case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */
3964 		lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
3965 		maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
3966 		break;
3967 
3968 	case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */
3969 		lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
3970 		maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
3971 		break;
3972 
3973 	case QIB_IB_CFG_LINKLATENCY:
3974 		ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) &
3975 			SYM_MASK(IBCStatusB_0, LinkRoundTripLatency);
3976 		goto done;
3977 
3978 	case QIB_IB_CFG_OP_VLS:
3979 		ret = ppd->vls_operational;
3980 		goto done;
3981 
3982 	case QIB_IB_CFG_VL_HIGH_CAP:
3983 		ret = 16;
3984 		goto done;
3985 
3986 	case QIB_IB_CFG_VL_LOW_CAP:
3987 		ret = 16;
3988 		goto done;
3989 
3990 	case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
3991 		ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
3992 				OverrunThreshold);
3993 		goto done;
3994 
3995 	case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
3996 		ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
3997 				PhyerrThreshold);
3998 		goto done;
3999 
4000 	case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
4001 		/* will only take effect when the link state changes */
4002 		ret = (ppd->cpspec->ibcctrl_a &
4003 		       SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ?
4004 			IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL;
4005 		goto done;
4006 
4007 	case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */
4008 		lsb = IBA7322_IBC_HRTBT_LSB;
4009 		maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */
4010 		break;
4011 
4012 	case QIB_IB_CFG_PMA_TICKS:
4013 		/*
4014 		 * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs
4015 		 * Since the clock is always 250MHz, the value is 3, 1 or 0.
4016 		 */
4017 		if (ppd->link_speed_active == QIB_IB_QDR)
4018 			ret = 3;
4019 		else if (ppd->link_speed_active == QIB_IB_DDR)
4020 			ret = 1;
4021 		else
4022 			ret = 0;
4023 		goto done;
4024 
4025 	default:
4026 		ret = -EINVAL;
4027 		goto done;
4028 	}
4029 	ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr);
4030 done:
4031 	return ret;
4032 }
4033 
4034 /*
4035  * Below again cribbed liberally from older version. Do not lean
4036  * heavily on it.
4037  */
4038 #define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB
4039 #define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \
4040 	| (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16))
4041 
4042 static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
4043 {
4044 	struct qib_devdata *dd = ppd->dd;
4045 	u64 maskr; /* right-justified mask */
4046 	int lsb, ret = 0;
4047 	u16 lcmd, licmd;
4048 	unsigned long flags;
4049 
4050 	switch (which) {
4051 	case QIB_IB_CFG_LIDLMC:
4052 		/*
4053 		 * Set LID and LMC. Combined to avoid possible hazard
4054 		 * caller puts LMC in 16MSbits, DLID in 16LSbits of val
4055 		 */
4056 		lsb = IBA7322_IBC_DLIDLMC_SHIFT;
4057 		maskr = IBA7322_IBC_DLIDLMC_MASK;
4058 		/*
4059 		 * For header-checking, the SLID in the packet will
4060 		 * be masked with SendIBSLMCMask, and compared
4061 		 * with SendIBSLIDAssignMask. Make sure we do not
4062 		 * set any bits not covered by the mask, or we get
4063 		 * false-positives.
4064 		 */
4065 		qib_write_kreg_port(ppd, krp_sendslid,
4066 				    val & (val >> 16) & SendIBSLIDAssignMask);
4067 		qib_write_kreg_port(ppd, krp_sendslidmask,
4068 				    (val >> 16) & SendIBSLMCMask);
4069 		break;
4070 
4071 	case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */
4072 		ppd->link_width_enabled = val;
4073 		/* convert IB value to chip register value */
4074 		if (val == IB_WIDTH_1X)
4075 			val = 0;
4076 		else if (val == IB_WIDTH_4X)
4077 			val = 1;
4078 		else
4079 			val = 3;
4080 		maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS);
4081 		lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS);
4082 		break;
4083 
4084 	case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */
4085 		/*
4086 		 * As with width, only write the actual register if the
4087 		 * link is currently down, otherwise takes effect on next
4088 		 * link change.  Since setting is being explicitly requested
4089 		 * (via MAD or sysfs), clear autoneg failure status if speed
4090 		 * autoneg is enabled.
4091 		 */
4092 		ppd->link_speed_enabled = val;
4093 		val <<= IBA7322_IBC_SPEED_LSB;
4094 		maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK |
4095 			IBA7322_IBC_MAX_SPEED_MASK;
4096 		if (val & (val - 1)) {
4097 			/* Muliple speeds enabled */
4098 			val |= IBA7322_IBC_IBTA_1_2_MASK |
4099 				IBA7322_IBC_MAX_SPEED_MASK;
4100 			spin_lock_irqsave(&ppd->lflags_lock, flags);
4101 			ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
4102 			spin_unlock_irqrestore(&ppd->lflags_lock, flags);
4103 		} else if (val & IBA7322_IBC_SPEED_QDR)
4104 			val |= IBA7322_IBC_IBTA_1_2_MASK;
4105 		/* IBTA 1.2 mode + min/max + speed bits are contiguous */
4106 		lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE);
4107 		break;
4108 
4109 	case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */
4110 		lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
4111 		maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
4112 		break;
4113 
4114 	case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */
4115 		lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
4116 		maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
4117 		break;
4118 
4119 	case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
4120 		maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
4121 				  OverrunThreshold);
4122 		if (maskr != val) {
4123 			ppd->cpspec->ibcctrl_a &=
4124 				~SYM_MASK(IBCCtrlA_0, OverrunThreshold);
4125 			ppd->cpspec->ibcctrl_a |= (u64) val <<
4126 				SYM_LSB(IBCCtrlA_0, OverrunThreshold);
4127 			qib_write_kreg_port(ppd, krp_ibcctrl_a,
4128 					    ppd->cpspec->ibcctrl_a);
4129 			qib_write_kreg(dd, kr_scratch, 0ULL);
4130 		}
4131 		goto bail;
4132 
4133 	case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
4134 		maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
4135 				  PhyerrThreshold);
4136 		if (maskr != val) {
4137 			ppd->cpspec->ibcctrl_a &=
4138 				~SYM_MASK(IBCCtrlA_0, PhyerrThreshold);
4139 			ppd->cpspec->ibcctrl_a |= (u64) val <<
4140 				SYM_LSB(IBCCtrlA_0, PhyerrThreshold);
4141 			qib_write_kreg_port(ppd, krp_ibcctrl_a,
4142 					    ppd->cpspec->ibcctrl_a);
4143 			qib_write_kreg(dd, kr_scratch, 0ULL);
4144 		}
4145 		goto bail;
4146 
4147 	case QIB_IB_CFG_PKEYS: /* update pkeys */
4148 		maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) |
4149 			((u64) ppd->pkeys[2] << 32) |
4150 			((u64) ppd->pkeys[3] << 48);
4151 		qib_write_kreg_port(ppd, krp_partitionkey, maskr);
4152 		goto bail;
4153 
4154 	case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
4155 		/* will only take effect when the link state changes */
4156 		if (val == IB_LINKINITCMD_POLL)
4157 			ppd->cpspec->ibcctrl_a &=
4158 				~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState);
4159 		else /* SLEEP */
4160 			ppd->cpspec->ibcctrl_a |=
4161 				SYM_MASK(IBCCtrlA_0, LinkDownDefaultState);
4162 		qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
4163 		qib_write_kreg(dd, kr_scratch, 0ULL);
4164 		goto bail;
4165 
4166 	case QIB_IB_CFG_MTU: /* update the MTU in IBC */
4167 		/*
4168 		 * Update our housekeeping variables, and set IBC max
4169 		 * size, same as init code; max IBC is max we allow in
4170 		 * buffer, less the qword pbc, plus 1 for ICRC, in dwords
4171 		 * Set even if it's unchanged, print debug message only
4172 		 * on changes.
4173 		 */
4174 		val = (ppd->ibmaxlen >> 2) + 1;
4175 		ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen);
4176 		ppd->cpspec->ibcctrl_a |= (u64)val <<
4177 			SYM_LSB(IBCCtrlA_0, MaxPktLen);
4178 		qib_write_kreg_port(ppd, krp_ibcctrl_a,
4179 				    ppd->cpspec->ibcctrl_a);
4180 		qib_write_kreg(dd, kr_scratch, 0ULL);
4181 		goto bail;
4182 
4183 	case QIB_IB_CFG_LSTATE: /* set the IB link state */
4184 		switch (val & 0xffff0000) {
4185 		case IB_LINKCMD_DOWN:
4186 			lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN;
4187 			ppd->cpspec->ibmalfusesnap = 1;
4188 			ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd,
4189 				crp_errlink);
4190 			if (!ppd->cpspec->ibdeltainprog &&
4191 			    qib_compat_ddr_negotiate) {
4192 				ppd->cpspec->ibdeltainprog = 1;
4193 				ppd->cpspec->ibsymsnap =
4194 					read_7322_creg32_port(ppd,
4195 							      crp_ibsymbolerr);
4196 				ppd->cpspec->iblnkerrsnap =
4197 					read_7322_creg32_port(ppd,
4198 						      crp_iblinkerrrecov);
4199 			}
4200 			break;
4201 
4202 		case IB_LINKCMD_ARMED:
4203 			lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED;
4204 			if (ppd->cpspec->ibmalfusesnap) {
4205 				ppd->cpspec->ibmalfusesnap = 0;
4206 				ppd->cpspec->ibmalfdelta +=
4207 					read_7322_creg32_port(ppd,
4208 							      crp_errlink) -
4209 					ppd->cpspec->ibmalfsnap;
4210 			}
4211 			break;
4212 
4213 		case IB_LINKCMD_ACTIVE:
4214 			lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE;
4215 			break;
4216 
4217 		default:
4218 			ret = -EINVAL;
4219 			qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16);
4220 			goto bail;
4221 		}
4222 		switch (val & 0xffff) {
4223 		case IB_LINKINITCMD_NOP:
4224 			licmd = 0;
4225 			break;
4226 
4227 		case IB_LINKINITCMD_POLL:
4228 			licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL;
4229 			break;
4230 
4231 		case IB_LINKINITCMD_SLEEP:
4232 			licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP;
4233 			break;
4234 
4235 		case IB_LINKINITCMD_DISABLE:
4236 			licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE;
4237 			ppd->cpspec->chase_end = 0;
4238 			/*
4239 			 * stop state chase counter and timer, if running.
4240 			 * wait forpending timer, but don't clear .data (ppd)!
4241 			 */
4242 			if (ppd->cpspec->chase_timer.expires) {
4243 				del_timer_sync(&ppd->cpspec->chase_timer);
4244 				ppd->cpspec->chase_timer.expires = 0;
4245 			}
4246 			break;
4247 
4248 		default:
4249 			ret = -EINVAL;
4250 			qib_dev_err(dd, "bad linkinitcmd req 0x%x\n",
4251 				    val & 0xffff);
4252 			goto bail;
4253 		}
4254 		qib_set_ib_7322_lstate(ppd, lcmd, licmd);
4255 		goto bail;
4256 
4257 	case QIB_IB_CFG_OP_VLS:
4258 		if (ppd->vls_operational != val) {
4259 			ppd->vls_operational = val;
4260 			set_vls(ppd);
4261 		}
4262 		goto bail;
4263 
4264 	case QIB_IB_CFG_VL_HIGH_LIMIT:
4265 		qib_write_kreg_port(ppd, krp_highprio_limit, val);
4266 		goto bail;
4267 
4268 	case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */
4269 		if (val > 3) {
4270 			ret = -EINVAL;
4271 			goto bail;
4272 		}
4273 		lsb = IBA7322_IBC_HRTBT_LSB;
4274 		maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */
4275 		break;
4276 
4277 	case QIB_IB_CFG_PORT:
4278 		/* val is the port number of the switch we are connected to. */
4279 		if (ppd->dd->cspec->r1) {
4280 			cancel_delayed_work(&ppd->cpspec->ipg_work);
4281 			ppd->cpspec->ipg_tries = 0;
4282 		}
4283 		goto bail;
4284 
4285 	default:
4286 		ret = -EINVAL;
4287 		goto bail;
4288 	}
4289 	ppd->cpspec->ibcctrl_b &= ~(maskr << lsb);
4290 	ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb);
4291 	qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b);
4292 	qib_write_kreg(dd, kr_scratch, 0);
4293 bail:
4294 	return ret;
4295 }
4296 
4297 static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what)
4298 {
4299 	int ret = 0;
4300 	u64 val, ctrlb;
4301 
4302 	/* only IBC loopback, may add serdes and xgxs loopbacks later */
4303 	if (!strncmp(what, "ibc", 3)) {
4304 		ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0,
4305 						       Loopback);
4306 		val = 0; /* disable heart beat, so link will come up */
4307 		qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n",
4308 			 ppd->dd->unit, ppd->port);
4309 	} else if (!strncmp(what, "off", 3)) {
4310 		ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0,
4311 							Loopback);
4312 		/* enable heart beat again */
4313 		val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB;
4314 		qib_devinfo(ppd->dd->pcidev,
4315 			"Disabling IB%u:%u IBC loopback (normal)\n",
4316 			ppd->dd->unit, ppd->port);
4317 	} else
4318 		ret = -EINVAL;
4319 	if (!ret) {
4320 		qib_write_kreg_port(ppd, krp_ibcctrl_a,
4321 				    ppd->cpspec->ibcctrl_a);
4322 		ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK
4323 					     << IBA7322_IBC_HRTBT_LSB);
4324 		ppd->cpspec->ibcctrl_b = ctrlb | val;
4325 		qib_write_kreg_port(ppd, krp_ibcctrl_b,
4326 				    ppd->cpspec->ibcctrl_b);
4327 		qib_write_kreg(ppd->dd, kr_scratch, 0);
4328 	}
4329 	return ret;
4330 }
4331 
4332 static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno,
4333 			   struct ib_vl_weight_elem *vl)
4334 {
4335 	unsigned i;
4336 
4337 	for (i = 0; i < 16; i++, regno++, vl++) {
4338 		u32 val = qib_read_kreg_port(ppd, regno);
4339 
4340 		vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) &
4341 			SYM_RMASK(LowPriority0_0, VirtualLane);
4342 		vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) &
4343 			SYM_RMASK(LowPriority0_0, Weight);
4344 	}
4345 }
4346 
4347 static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno,
4348 			   struct ib_vl_weight_elem *vl)
4349 {
4350 	unsigned i;
4351 
4352 	for (i = 0; i < 16; i++, regno++, vl++) {
4353 		u64 val;
4354 
4355 		val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) <<
4356 			SYM_LSB(LowPriority0_0, VirtualLane)) |
4357 		      ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) <<
4358 			SYM_LSB(LowPriority0_0, Weight));
4359 		qib_write_kreg_port(ppd, regno, val);
4360 	}
4361 	if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) {
4362 		struct qib_devdata *dd = ppd->dd;
4363 		unsigned long flags;
4364 
4365 		spin_lock_irqsave(&dd->sendctrl_lock, flags);
4366 		ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn);
4367 		qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
4368 		qib_write_kreg(dd, kr_scratch, 0);
4369 		spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
4370 	}
4371 }
4372 
4373 static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t)
4374 {
4375 	switch (which) {
4376 	case QIB_IB_TBL_VL_HIGH_ARB:
4377 		get_vl_weights(ppd, krp_highprio_0, t);
4378 		break;
4379 
4380 	case QIB_IB_TBL_VL_LOW_ARB:
4381 		get_vl_weights(ppd, krp_lowprio_0, t);
4382 		break;
4383 
4384 	default:
4385 		return -EINVAL;
4386 	}
4387 	return 0;
4388 }
4389 
4390 static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t)
4391 {
4392 	switch (which) {
4393 	case QIB_IB_TBL_VL_HIGH_ARB:
4394 		set_vl_weights(ppd, krp_highprio_0, t);
4395 		break;
4396 
4397 	case QIB_IB_TBL_VL_LOW_ARB:
4398 		set_vl_weights(ppd, krp_lowprio_0, t);
4399 		break;
4400 
4401 	default:
4402 		return -EINVAL;
4403 	}
4404 	return 0;
4405 }
4406 
4407 static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd,
4408 				    u32 updegr, u32 egrhd, u32 npkts)
4409 {
4410 	/*
4411 	 * Need to write timeout register before updating rcvhdrhead to ensure
4412 	 * that the timer is enabled on reception of a packet.
4413 	 */
4414 	if (hd >> IBA7322_HDRHEAD_PKTINT_SHIFT)
4415 		adjust_rcv_timeout(rcd, npkts);
4416 	if (updegr)
4417 		qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
4418 	qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
4419 	qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
4420 }
4421 
4422 static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd)
4423 {
4424 	u32 head, tail;
4425 
4426 	head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt);
4427 	if (rcd->rcvhdrtail_kvaddr)
4428 		tail = qib_get_rcvhdrtail(rcd);
4429 	else
4430 		tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt);
4431 	return head == tail;
4432 }
4433 
4434 #define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \
4435 	QIB_RCVCTRL_CTXT_DIS | \
4436 	QIB_RCVCTRL_TIDFLOW_ENB | \
4437 	QIB_RCVCTRL_TIDFLOW_DIS | \
4438 	QIB_RCVCTRL_TAILUPD_ENB | \
4439 	QIB_RCVCTRL_TAILUPD_DIS | \
4440 	QIB_RCVCTRL_INTRAVAIL_ENB | \
4441 	QIB_RCVCTRL_INTRAVAIL_DIS | \
4442 	QIB_RCVCTRL_BP_ENB | \
4443 	QIB_RCVCTRL_BP_DIS)
4444 
4445 #define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \
4446 	QIB_RCVCTRL_CTXT_DIS | \
4447 	QIB_RCVCTRL_PKEY_DIS | \
4448 	QIB_RCVCTRL_PKEY_ENB)
4449 
4450 /*
4451  * Modify the RCVCTRL register in chip-specific way. This
4452  * is a function because bit positions and (future) register
4453  * location is chip-specifc, but the needed operations are
4454  * generic. <op> is a bit-mask because we often want to
4455  * do multiple modifications.
4456  */
4457 static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op,
4458 			     int ctxt)
4459 {
4460 	struct qib_devdata *dd = ppd->dd;
4461 	struct qib_ctxtdata *rcd;
4462 	u64 mask, val;
4463 	unsigned long flags;
4464 
4465 	spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
4466 
4467 	if (op & QIB_RCVCTRL_TIDFLOW_ENB)
4468 		dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable);
4469 	if (op & QIB_RCVCTRL_TIDFLOW_DIS)
4470 		dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable);
4471 	if (op & QIB_RCVCTRL_TAILUPD_ENB)
4472 		dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd);
4473 	if (op & QIB_RCVCTRL_TAILUPD_DIS)
4474 		dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd);
4475 	if (op & QIB_RCVCTRL_PKEY_ENB)
4476 		ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable);
4477 	if (op & QIB_RCVCTRL_PKEY_DIS)
4478 		ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable);
4479 	if (ctxt < 0) {
4480 		mask = (1ULL << dd->ctxtcnt) - 1;
4481 		rcd = NULL;
4482 	} else {
4483 		mask = (1ULL << ctxt);
4484 		rcd = dd->rcd[ctxt];
4485 	}
4486 	if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) {
4487 		ppd->p_rcvctrl |=
4488 			(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel));
4489 		if (!(dd->flags & QIB_NODMA_RTAIL)) {
4490 			op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */
4491 			dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd);
4492 		}
4493 		/* Write these registers before the context is enabled. */
4494 		qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt,
4495 				    rcd->rcvhdrqtailaddr_phys);
4496 		qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt,
4497 				    rcd->rcvhdrq_phys);
4498 		rcd->seq_cnt = 1;
4499 	}
4500 	if (op & QIB_RCVCTRL_CTXT_DIS)
4501 		ppd->p_rcvctrl &=
4502 			~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel));
4503 	if (op & QIB_RCVCTRL_BP_ENB)
4504 		dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull);
4505 	if (op & QIB_RCVCTRL_BP_DIS)
4506 		dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull));
4507 	if (op & QIB_RCVCTRL_INTRAVAIL_ENB)
4508 		dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail));
4509 	if (op & QIB_RCVCTRL_INTRAVAIL_DIS)
4510 		dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail));
4511 	/*
4512 	 * Decide which registers to write depending on the ops enabled.
4513 	 * Special case is "flush" (no bits set at all)
4514 	 * which needs to write both.
4515 	 */
4516 	if (op == 0 || (op & RCVCTRL_COMMON_MODS))
4517 		qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
4518 	if (op == 0 || (op & RCVCTRL_PORT_MODS))
4519 		qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl);
4520 	if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) {
4521 		/*
4522 		 * Init the context registers also; if we were
4523 		 * disabled, tail and head should both be zero
4524 		 * already from the enable, but since we don't
4525 		 * know, we have to do it explicitly.
4526 		 */
4527 		val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
4528 		qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
4529 
4530 		/* be sure enabling write seen; hd/tl should be 0 */
4531 		(void) qib_read_kreg32(dd, kr_scratch);
4532 		val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt);
4533 		dd->rcd[ctxt]->head = val;
4534 		/* If kctxt, interrupt on next receive. */
4535 		if (ctxt < dd->first_user_ctxt)
4536 			val |= dd->rhdrhead_intr_off;
4537 		qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
4538 	} else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) &&
4539 		dd->rcd[ctxt] && dd->rhdrhead_intr_off) {
4540 		/* arm rcv interrupt */
4541 		val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off;
4542 		qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
4543 	}
4544 	if (op & QIB_RCVCTRL_CTXT_DIS) {
4545 		unsigned f;
4546 
4547 		/* Now that the context is disabled, clear these registers. */
4548 		if (ctxt >= 0) {
4549 			qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0);
4550 			qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0);
4551 			for (f = 0; f < NUM_TIDFLOWS_CTXT; f++)
4552 				qib_write_ureg(dd, ur_rcvflowtable + f,
4553 					       TIDFLOW_ERRBITS, ctxt);
4554 		} else {
4555 			unsigned i;
4556 
4557 			for (i = 0; i < dd->cfgctxts; i++) {
4558 				qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr,
4559 						    i, 0);
4560 				qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0);
4561 				for (f = 0; f < NUM_TIDFLOWS_CTXT; f++)
4562 					qib_write_ureg(dd, ur_rcvflowtable + f,
4563 						       TIDFLOW_ERRBITS, i);
4564 			}
4565 		}
4566 	}
4567 	spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
4568 }
4569 
4570 /*
4571  * Modify the SENDCTRL register in chip-specific way. This
4572  * is a function where there are multiple such registers with
4573  * slightly different layouts.
4574  * The chip doesn't allow back-to-back sendctrl writes, so write
4575  * the scratch register after writing sendctrl.
4576  *
4577  * Which register is written depends on the operation.
4578  * Most operate on the common register, while
4579  * SEND_ENB and SEND_DIS operate on the per-port ones.
4580  * SEND_ENB is included in common because it can change SPCL_TRIG
4581  */
4582 #define SENDCTRL_COMMON_MODS (\
4583 	QIB_SENDCTRL_CLEAR | \
4584 	QIB_SENDCTRL_AVAIL_DIS | \
4585 	QIB_SENDCTRL_AVAIL_ENB | \
4586 	QIB_SENDCTRL_AVAIL_BLIP | \
4587 	QIB_SENDCTRL_DISARM | \
4588 	QIB_SENDCTRL_DISARM_ALL | \
4589 	QIB_SENDCTRL_SEND_ENB)
4590 
4591 #define SENDCTRL_PORT_MODS (\
4592 	QIB_SENDCTRL_CLEAR | \
4593 	QIB_SENDCTRL_SEND_ENB | \
4594 	QIB_SENDCTRL_SEND_DIS | \
4595 	QIB_SENDCTRL_FLUSH)
4596 
4597 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op)
4598 {
4599 	struct qib_devdata *dd = ppd->dd;
4600 	u64 tmp_dd_sendctrl;
4601 	unsigned long flags;
4602 
4603 	spin_lock_irqsave(&dd->sendctrl_lock, flags);
4604 
4605 	/* First the dd ones that are "sticky", saved in shadow */
4606 	if (op & QIB_SENDCTRL_CLEAR)
4607 		dd->sendctrl = 0;
4608 	if (op & QIB_SENDCTRL_AVAIL_DIS)
4609 		dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
4610 	else if (op & QIB_SENDCTRL_AVAIL_ENB) {
4611 		dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd);
4612 		if (dd->flags & QIB_USE_SPCL_TRIG)
4613 			dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn);
4614 	}
4615 
4616 	/* Then the ppd ones that are "sticky", saved in shadow */
4617 	if (op & QIB_SENDCTRL_SEND_DIS)
4618 		ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable);
4619 	else if (op & QIB_SENDCTRL_SEND_ENB)
4620 		ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable);
4621 
4622 	if (op & QIB_SENDCTRL_DISARM_ALL) {
4623 		u32 i, last;
4624 
4625 		tmp_dd_sendctrl = dd->sendctrl;
4626 		last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS;
4627 		/*
4628 		 * Disarm any buffers that are not yet launched,
4629 		 * disabling updates until done.
4630 		 */
4631 		tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
4632 		for (i = 0; i < last; i++) {
4633 			qib_write_kreg(dd, kr_sendctrl,
4634 				       tmp_dd_sendctrl |
4635 				       SYM_MASK(SendCtrl, Disarm) | i);
4636 			qib_write_kreg(dd, kr_scratch, 0);
4637 		}
4638 	}
4639 
4640 	if (op & QIB_SENDCTRL_FLUSH) {
4641 		u64 tmp_ppd_sendctrl = ppd->p_sendctrl;
4642 
4643 		/*
4644 		 * Now drain all the fifos.  The Abort bit should never be
4645 		 * needed, so for now, at least, we don't use it.
4646 		 */
4647 		tmp_ppd_sendctrl |=
4648 			SYM_MASK(SendCtrl_0, TxeDrainRmFifo) |
4649 			SYM_MASK(SendCtrl_0, TxeDrainLaFifo) |
4650 			SYM_MASK(SendCtrl_0, TxeBypassIbc);
4651 		qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl);
4652 		qib_write_kreg(dd, kr_scratch, 0);
4653 	}
4654 
4655 	tmp_dd_sendctrl = dd->sendctrl;
4656 
4657 	if (op & QIB_SENDCTRL_DISARM)
4658 		tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) |
4659 			((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) <<
4660 			 SYM_LSB(SendCtrl, DisarmSendBuf));
4661 	if ((op & QIB_SENDCTRL_AVAIL_BLIP) &&
4662 	    (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd)))
4663 		tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
4664 
4665 	if (op == 0 || (op & SENDCTRL_COMMON_MODS)) {
4666 		qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl);
4667 		qib_write_kreg(dd, kr_scratch, 0);
4668 	}
4669 
4670 	if (op == 0 || (op & SENDCTRL_PORT_MODS)) {
4671 		qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
4672 		qib_write_kreg(dd, kr_scratch, 0);
4673 	}
4674 
4675 	if (op & QIB_SENDCTRL_AVAIL_BLIP) {
4676 		qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
4677 		qib_write_kreg(dd, kr_scratch, 0);
4678 	}
4679 
4680 	spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
4681 
4682 	if (op & QIB_SENDCTRL_FLUSH) {
4683 		u32 v;
4684 		/*
4685 		 * ensure writes have hit chip, then do a few
4686 		 * more reads, to allow DMA of pioavail registers
4687 		 * to occur, so in-memory copy is in sync with
4688 		 * the chip.  Not always safe to sleep.
4689 		 */
4690 		v = qib_read_kreg32(dd, kr_scratch);
4691 		qib_write_kreg(dd, kr_scratch, v);
4692 		v = qib_read_kreg32(dd, kr_scratch);
4693 		qib_write_kreg(dd, kr_scratch, v);
4694 		qib_read_kreg32(dd, kr_scratch);
4695 	}
4696 }
4697 
4698 #define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */
4699 #define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */
4700 #define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */
4701 
4702 /**
4703  * qib_portcntr_7322 - read a per-port chip counter
4704  * @ppd: the qlogic_ib pport
4705  * @reg: the counter to read (not a chip offset)
4706  */
4707 static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg)
4708 {
4709 	struct qib_devdata *dd = ppd->dd;
4710 	u64 ret = 0ULL;
4711 	u16 creg;
4712 	/* 0xffff for unimplemented or synthesized counters */
4713 	static const u32 xlator[] = {
4714 		[QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG,
4715 		[QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG,
4716 		[QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount,
4717 		[QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount,
4718 		[QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount,
4719 		[QIBPORTCNTR_SENDSTALL] = crp_sendstall,
4720 		[QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG,
4721 		[QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount,
4722 		[QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount,
4723 		[QIBPORTCNTR_RCVEBP] = crp_rcvebp,
4724 		[QIBPORTCNTR_RCVOVFL] = crp_rcvovfl,
4725 		[QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG,
4726 		[QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed  for 7322 */
4727 		[QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr,
4728 		[QIBPORTCNTR_RXVLERR] = crp_rxvlerr,
4729 		[QIBPORTCNTR_ERRICRC] = crp_erricrc,
4730 		[QIBPORTCNTR_ERRVCRC] = crp_errvcrc,
4731 		[QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc,
4732 		[QIBPORTCNTR_BADFORMAT] = crp_badformat,
4733 		[QIBPORTCNTR_ERR_RLEN] = crp_err_rlen,
4734 		[QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr,
4735 		[QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen,
4736 		[QIBPORTCNTR_UNSUPVL] = crp_txunsupvl,
4737 		[QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl,
4738 		[QIBPORTCNTR_ERRLINK] = crp_errlink,
4739 		[QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown,
4740 		[QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov,
4741 		[QIBPORTCNTR_LLI] = crp_locallinkintegrityerr,
4742 		[QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt,
4743 		[QIBPORTCNTR_ERRPKEY] = crp_errpkey,
4744 		/*
4745 		 * the next 3 aren't really counters, but were implemented
4746 		 * as counters in older chips, so still get accessed as
4747 		 * though they were counters from this code.
4748 		 */
4749 		[QIBPORTCNTR_PSINTERVAL] = krp_psinterval,
4750 		[QIBPORTCNTR_PSSTART] = krp_psstart,
4751 		[QIBPORTCNTR_PSSTAT] = krp_psstat,
4752 		/* pseudo-counter, summed for all ports */
4753 		[QIBPORTCNTR_KHDROVFL] = 0xffff,
4754 	};
4755 
4756 	if (reg >= ARRAY_SIZE(xlator)) {
4757 		qib_devinfo(ppd->dd->pcidev,
4758 			 "Unimplemented portcounter %u\n", reg);
4759 		goto done;
4760 	}
4761 	creg = xlator[reg] & _PORT_CNTR_IDXMASK;
4762 
4763 	/* handle non-counters and special cases first */
4764 	if (reg == QIBPORTCNTR_KHDROVFL) {
4765 		int i;
4766 
4767 		/* sum over all kernel contexts (skip if mini_init) */
4768 		for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) {
4769 			struct qib_ctxtdata *rcd = dd->rcd[i];
4770 
4771 			if (!rcd || rcd->ppd != ppd)
4772 				continue;
4773 			ret += read_7322_creg32(dd, cr_base_egrovfl + i);
4774 		}
4775 		goto done;
4776 	} else if (reg == QIBPORTCNTR_RXDROPPKT) {
4777 		/*
4778 		 * Used as part of the synthesis of port_rcv_errors
4779 		 * in the verbs code for IBTA counters.  Not needed for 7322,
4780 		 * because all the errors are already counted by other cntrs.
4781 		 */
4782 		goto done;
4783 	} else if (reg == QIBPORTCNTR_PSINTERVAL ||
4784 		   reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) {
4785 		/* were counters in older chips, now per-port kernel regs */
4786 		ret = qib_read_kreg_port(ppd, creg);
4787 		goto done;
4788 	}
4789 
4790 	/*
4791 	 * Only fast increment counters are 64 bits; use 32 bit reads to
4792 	 * avoid two independent reads when on Opteron.
4793 	 */
4794 	if (xlator[reg] & _PORT_64BIT_FLAG)
4795 		ret = read_7322_creg_port(ppd, creg);
4796 	else
4797 		ret = read_7322_creg32_port(ppd, creg);
4798 	if (creg == crp_ibsymbolerr) {
4799 		if (ppd->cpspec->ibdeltainprog)
4800 			ret -= ret - ppd->cpspec->ibsymsnap;
4801 		ret -= ppd->cpspec->ibsymdelta;
4802 	} else if (creg == crp_iblinkerrrecov) {
4803 		if (ppd->cpspec->ibdeltainprog)
4804 			ret -= ret - ppd->cpspec->iblnkerrsnap;
4805 		ret -= ppd->cpspec->iblnkerrdelta;
4806 	} else if (creg == crp_errlink)
4807 		ret -= ppd->cpspec->ibmalfdelta;
4808 	else if (creg == crp_iblinkdown)
4809 		ret += ppd->cpspec->iblnkdowndelta;
4810 done:
4811 	return ret;
4812 }
4813 
4814 /*
4815  * Device counter names (not port-specific), one line per stat,
4816  * single string.  Used by utilities like ipathstats to print the stats
4817  * in a way which works for different versions of drivers, without changing
4818  * the utility.  Names need to be 12 chars or less (w/o newline), for proper
4819  * display by utility.
4820  * Non-error counters are first.
4821  * Start of "error" conters is indicated by a leading "E " on the first
4822  * "error" counter, and doesn't count in label length.
4823  * The EgrOvfl list needs to be last so we truncate them at the configured
4824  * context count for the device.
4825  * cntr7322indices contains the corresponding register indices.
4826  */
4827 static const char cntr7322names[] =
4828 	"Interrupts\n"
4829 	"HostBusStall\n"
4830 	"E RxTIDFull\n"
4831 	"RxTIDInvalid\n"
4832 	"RxTIDFloDrop\n" /* 7322 only */
4833 	"Ctxt0EgrOvfl\n"
4834 	"Ctxt1EgrOvfl\n"
4835 	"Ctxt2EgrOvfl\n"
4836 	"Ctxt3EgrOvfl\n"
4837 	"Ctxt4EgrOvfl\n"
4838 	"Ctxt5EgrOvfl\n"
4839 	"Ctxt6EgrOvfl\n"
4840 	"Ctxt7EgrOvfl\n"
4841 	"Ctxt8EgrOvfl\n"
4842 	"Ctxt9EgrOvfl\n"
4843 	"Ctx10EgrOvfl\n"
4844 	"Ctx11EgrOvfl\n"
4845 	"Ctx12EgrOvfl\n"
4846 	"Ctx13EgrOvfl\n"
4847 	"Ctx14EgrOvfl\n"
4848 	"Ctx15EgrOvfl\n"
4849 	"Ctx16EgrOvfl\n"
4850 	"Ctx17EgrOvfl\n"
4851 	;
4852 
4853 static const u32 cntr7322indices[] = {
4854 	cr_lbint | _PORT_64BIT_FLAG,
4855 	cr_lbstall | _PORT_64BIT_FLAG,
4856 	cr_tidfull,
4857 	cr_tidinvalid,
4858 	cr_rxtidflowdrop,
4859 	cr_base_egrovfl + 0,
4860 	cr_base_egrovfl + 1,
4861 	cr_base_egrovfl + 2,
4862 	cr_base_egrovfl + 3,
4863 	cr_base_egrovfl + 4,
4864 	cr_base_egrovfl + 5,
4865 	cr_base_egrovfl + 6,
4866 	cr_base_egrovfl + 7,
4867 	cr_base_egrovfl + 8,
4868 	cr_base_egrovfl + 9,
4869 	cr_base_egrovfl + 10,
4870 	cr_base_egrovfl + 11,
4871 	cr_base_egrovfl + 12,
4872 	cr_base_egrovfl + 13,
4873 	cr_base_egrovfl + 14,
4874 	cr_base_egrovfl + 15,
4875 	cr_base_egrovfl + 16,
4876 	cr_base_egrovfl + 17,
4877 };
4878 
4879 /*
4880  * same as cntr7322names and cntr7322indices, but for port-specific counters.
4881  * portcntr7322indices is somewhat complicated by some registers needing
4882  * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG
4883  */
4884 static const char portcntr7322names[] =
4885 	"TxPkt\n"
4886 	"TxFlowPkt\n"
4887 	"TxWords\n"
4888 	"RxPkt\n"
4889 	"RxFlowPkt\n"
4890 	"RxWords\n"
4891 	"TxFlowStall\n"
4892 	"TxDmaDesc\n"  /* 7220 and 7322-only */
4893 	"E RxDlidFltr\n"  /* 7220 and 7322-only */
4894 	"IBStatusChng\n"
4895 	"IBLinkDown\n"
4896 	"IBLnkRecov\n"
4897 	"IBRxLinkErr\n"
4898 	"IBSymbolErr\n"
4899 	"RxLLIErr\n"
4900 	"RxBadFormat\n"
4901 	"RxBadLen\n"
4902 	"RxBufOvrfl\n"
4903 	"RxEBP\n"
4904 	"RxFlowCtlErr\n"
4905 	"RxICRCerr\n"
4906 	"RxLPCRCerr\n"
4907 	"RxVCRCerr\n"
4908 	"RxInvalLen\n"
4909 	"RxInvalPKey\n"
4910 	"RxPktDropped\n"
4911 	"TxBadLength\n"
4912 	"TxDropped\n"
4913 	"TxInvalLen\n"
4914 	"TxUnderrun\n"
4915 	"TxUnsupVL\n"
4916 	"RxLclPhyErr\n" /* 7220 and 7322-only from here down */
4917 	"RxVL15Drop\n"
4918 	"RxVlErr\n"
4919 	"XcessBufOvfl\n"
4920 	"RxQPBadCtxt\n" /* 7322-only from here down */
4921 	"TXBadHeader\n"
4922 	;
4923 
4924 static const u32 portcntr7322indices[] = {
4925 	QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG,
4926 	crp_pktsendflow,
4927 	QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG,
4928 	QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG,
4929 	crp_pktrcvflowctrl,
4930 	QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG,
4931 	QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG,
4932 	crp_txsdmadesc | _PORT_64BIT_FLAG,
4933 	crp_rxdlidfltr,
4934 	crp_ibstatuschange,
4935 	QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG,
4936 	QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG,
4937 	QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG,
4938 	QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG,
4939 	QIBPORTCNTR_LLI | _PORT_VIRT_FLAG,
4940 	QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG,
4941 	QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG,
4942 	QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG,
4943 	QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG,
4944 	crp_rcvflowctrlviol,
4945 	QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG,
4946 	QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG,
4947 	QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG,
4948 	QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG,
4949 	QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG,
4950 	QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG,
4951 	crp_txminmaxlenerr,
4952 	crp_txdroppedpkt,
4953 	crp_txlenerr,
4954 	crp_txunderrun,
4955 	crp_txunsupvl,
4956 	QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG,
4957 	QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG,
4958 	QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG,
4959 	QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG,
4960 	crp_rxqpinvalidctxt,
4961 	crp_txhdrerr,
4962 };
4963 
4964 /* do all the setup to make the counter reads efficient later */
4965 static void init_7322_cntrnames(struct qib_devdata *dd)
4966 {
4967 	int i, j = 0;
4968 	char *s;
4969 
4970 	for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts;
4971 	     i++) {
4972 		/* we always have at least one counter before the egrovfl */
4973 		if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12))
4974 			j = 1;
4975 		s = strchr(s + 1, '\n');
4976 		if (s && j)
4977 			j++;
4978 	}
4979 	dd->cspec->ncntrs = i;
4980 	if (!s)
4981 		/* full list; size is without terminating null */
4982 		dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1;
4983 	else
4984 		dd->cspec->cntrnamelen = 1 + s - cntr7322names;
4985 	dd->cspec->cntrs = kmalloc_array(dd->cspec->ncntrs, sizeof(u64),
4986 					 GFP_KERNEL);
4987 
4988 	for (i = 0, s = (char *)portcntr7322names; s; i++)
4989 		s = strchr(s + 1, '\n');
4990 	dd->cspec->nportcntrs = i - 1;
4991 	dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1;
4992 	for (i = 0; i < dd->num_pports; ++i) {
4993 		dd->pport[i].cpspec->portcntrs =
4994 			kmalloc_array(dd->cspec->nportcntrs, sizeof(u64),
4995 				      GFP_KERNEL);
4996 	}
4997 }
4998 
4999 static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep,
5000 			      u64 **cntrp)
5001 {
5002 	u32 ret;
5003 
5004 	if (namep) {
5005 		ret = dd->cspec->cntrnamelen;
5006 		if (pos >= ret)
5007 			ret = 0; /* final read after getting everything */
5008 		else
5009 			*namep = (char *) cntr7322names;
5010 	} else {
5011 		u64 *cntr = dd->cspec->cntrs;
5012 		int i;
5013 
5014 		ret = dd->cspec->ncntrs * sizeof(u64);
5015 		if (!cntr || pos >= ret) {
5016 			/* everything read, or couldn't get memory */
5017 			ret = 0;
5018 			goto done;
5019 		}
5020 		*cntrp = cntr;
5021 		for (i = 0; i < dd->cspec->ncntrs; i++)
5022 			if (cntr7322indices[i] & _PORT_64BIT_FLAG)
5023 				*cntr++ = read_7322_creg(dd,
5024 							 cntr7322indices[i] &
5025 							 _PORT_CNTR_IDXMASK);
5026 			else
5027 				*cntr++ = read_7322_creg32(dd,
5028 							   cntr7322indices[i]);
5029 	}
5030 done:
5031 	return ret;
5032 }
5033 
5034 static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port,
5035 				  char **namep, u64 **cntrp)
5036 {
5037 	u32 ret;
5038 
5039 	if (namep) {
5040 		ret = dd->cspec->portcntrnamelen;
5041 		if (pos >= ret)
5042 			ret = 0; /* final read after getting everything */
5043 		else
5044 			*namep = (char *)portcntr7322names;
5045 	} else {
5046 		struct qib_pportdata *ppd = &dd->pport[port];
5047 		u64 *cntr = ppd->cpspec->portcntrs;
5048 		int i;
5049 
5050 		ret = dd->cspec->nportcntrs * sizeof(u64);
5051 		if (!cntr || pos >= ret) {
5052 			/* everything read, or couldn't get memory */
5053 			ret = 0;
5054 			goto done;
5055 		}
5056 		*cntrp = cntr;
5057 		for (i = 0; i < dd->cspec->nportcntrs; i++) {
5058 			if (portcntr7322indices[i] & _PORT_VIRT_FLAG)
5059 				*cntr++ = qib_portcntr_7322(ppd,
5060 					portcntr7322indices[i] &
5061 					_PORT_CNTR_IDXMASK);
5062 			else if (portcntr7322indices[i] & _PORT_64BIT_FLAG)
5063 				*cntr++ = read_7322_creg_port(ppd,
5064 					   portcntr7322indices[i] &
5065 					    _PORT_CNTR_IDXMASK);
5066 			else
5067 				*cntr++ = read_7322_creg32_port(ppd,
5068 					   portcntr7322indices[i]);
5069 		}
5070 	}
5071 done:
5072 	return ret;
5073 }
5074 
5075 /**
5076  * qib_get_7322_faststats - get word counters from chip before they overflow
5077  * @t: contains a pointer to the qlogic_ib device qib_devdata
5078  *
5079  * VESTIGIAL IBA7322 has no "small fast counters", so the only
5080  * real purpose of this function is to maintain the notion of
5081  * "active time", which in turn is only logged into the eeprom,
5082  * which we don;t have, yet, for 7322-based boards.
5083  *
5084  * called from add_timer
5085  */
5086 static void qib_get_7322_faststats(struct timer_list *t)
5087 {
5088 	struct qib_devdata *dd = from_timer(dd, t, stats_timer);
5089 	struct qib_pportdata *ppd;
5090 	unsigned long flags;
5091 	u64 traffic_wds;
5092 	int pidx;
5093 
5094 	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
5095 		ppd = dd->pport + pidx;
5096 
5097 		/*
5098 		 * If port isn't enabled or not operational ports, or
5099 		 * diags is running (can cause memory diags to fail)
5100 		 * skip this port this time.
5101 		 */
5102 		if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED)
5103 		    || dd->diag_client)
5104 			continue;
5105 
5106 		/*
5107 		 * Maintain an activity timer, based on traffic
5108 		 * exceeding a threshold, so we need to check the word-counts
5109 		 * even if they are 64-bit.
5110 		 */
5111 		traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) +
5112 			qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND);
5113 		spin_lock_irqsave(&ppd->dd->eep_st_lock, flags);
5114 		traffic_wds -= ppd->dd->traffic_wds;
5115 		ppd->dd->traffic_wds += traffic_wds;
5116 		spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags);
5117 		if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active &
5118 						QIB_IB_QDR) &&
5119 		    (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED |
5120 				    QIBL_LINKACTIVE)) &&
5121 		    ppd->cpspec->qdr_dfe_time &&
5122 		    time_is_before_jiffies(ppd->cpspec->qdr_dfe_time)) {
5123 			ppd->cpspec->qdr_dfe_on = 0;
5124 
5125 			qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
5126 					    ppd->dd->cspec->r1 ?
5127 					    QDR_STATIC_ADAPT_INIT_R1 :
5128 					    QDR_STATIC_ADAPT_INIT);
5129 			force_h1(ppd);
5130 		}
5131 	}
5132 	mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
5133 }
5134 
5135 /*
5136  * If we were using MSIx, try to fallback to INTx.
5137  */
5138 static int qib_7322_intr_fallback(struct qib_devdata *dd)
5139 {
5140 	if (!dd->cspec->num_msix_entries)
5141 		return 0; /* already using INTx */
5142 
5143 	qib_devinfo(dd->pcidev,
5144 		"MSIx interrupt not detected, trying INTx interrupts\n");
5145 	qib_7322_free_irq(dd);
5146 	if (pci_alloc_irq_vectors(dd->pcidev, 1, 1, PCI_IRQ_LEGACY) < 0)
5147 		qib_dev_err(dd, "Failed to enable INTx\n");
5148 	qib_setup_7322_interrupt(dd, 0);
5149 	return 1;
5150 }
5151 
5152 /*
5153  * Reset the XGXS (between serdes and IBC).  Slightly less intrusive
5154  * than resetting the IBC or external link state, and useful in some
5155  * cases to cause some retraining.  To do this right, we reset IBC
5156  * as well, then return to previous state (which may be still in reset)
5157  * NOTE: some callers of this "know" this writes the current value
5158  * of cpspec->ibcctrl_a as part of it's operation, so if that changes,
5159  * check all callers.
5160  */
5161 static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd)
5162 {
5163 	u64 val;
5164 	struct qib_devdata *dd = ppd->dd;
5165 	const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) |
5166 		SYM_MASK(IBPCSConfig_0, xcv_treset) |
5167 		SYM_MASK(IBPCSConfig_0, tx_rx_reset);
5168 
5169 	val = qib_read_kreg_port(ppd, krp_ib_pcsconfig);
5170 	qib_write_kreg(dd, kr_hwerrmask,
5171 		       dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop));
5172 	qib_write_kreg_port(ppd, krp_ibcctrl_a,
5173 			    ppd->cpspec->ibcctrl_a &
5174 			    ~SYM_MASK(IBCCtrlA_0, IBLinkEn));
5175 
5176 	qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits);
5177 	qib_read_kreg32(dd, kr_scratch);
5178 	qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits);
5179 	qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
5180 	qib_write_kreg(dd, kr_scratch, 0ULL);
5181 	qib_write_kreg(dd, kr_hwerrclear,
5182 		       SYM_MASK(HwErrClear, statusValidNoEopClear));
5183 	qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
5184 }
5185 
5186 /*
5187  * This code for non-IBTA-compliant IB speed negotiation is only known to
5188  * work for the SDR to DDR transition, and only between an HCA and a switch
5189  * with recent firmware.  It is based on observed heuristics, rather than
5190  * actual knowledge of the non-compliant speed negotiation.
5191  * It has a number of hard-coded fields, since the hope is to rewrite this
5192  * when a spec is available on how the negoation is intended to work.
5193  */
5194 static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr,
5195 				 u32 dcnt, u32 *data)
5196 {
5197 	int i;
5198 	u64 pbc;
5199 	u32 __iomem *piobuf;
5200 	u32 pnum, control, len;
5201 	struct qib_devdata *dd = ppd->dd;
5202 
5203 	i = 0;
5204 	len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */
5205 	control = qib_7322_setpbc_control(ppd, len, 0, 15);
5206 	pbc = ((u64) control << 32) | len;
5207 	while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) {
5208 		if (i++ > 15)
5209 			return;
5210 		udelay(2);
5211 	}
5212 	/* disable header check on this packet, since it can't be valid */
5213 	dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL);
5214 	writeq(pbc, piobuf);
5215 	qib_flush_wc();
5216 	qib_pio_copy(piobuf + 2, hdr, 7);
5217 	qib_pio_copy(piobuf + 9, data, dcnt);
5218 	if (dd->flags & QIB_USE_SPCL_TRIG) {
5219 		u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023;
5220 
5221 		qib_flush_wc();
5222 		__raw_writel(0xaebecede, piobuf + spcl_off);
5223 	}
5224 	qib_flush_wc();
5225 	qib_sendbuf_done(dd, pnum);
5226 	/* and re-enable hdr check */
5227 	dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL);
5228 }
5229 
5230 /*
5231  * _start packet gets sent twice at start, _done gets sent twice at end
5232  */
5233 static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which)
5234 {
5235 	struct qib_devdata *dd = ppd->dd;
5236 	static u32 swapped;
5237 	u32 dw, i, hcnt, dcnt, *data;
5238 	static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba };
5239 	static u32 madpayload_start[0x40] = {
5240 		0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
5241 		0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
5242 		0x1, 0x1388, 0x15e, 0x1, /* rest 0's */
5243 		};
5244 	static u32 madpayload_done[0x40] = {
5245 		0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
5246 		0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
5247 		0x40000001, 0x1388, 0x15e, /* rest 0's */
5248 		};
5249 
5250 	dcnt = ARRAY_SIZE(madpayload_start);
5251 	hcnt = ARRAY_SIZE(hdr);
5252 	if (!swapped) {
5253 		/* for maintainability, do it at runtime */
5254 		for (i = 0; i < hcnt; i++) {
5255 			dw = (__force u32) cpu_to_be32(hdr[i]);
5256 			hdr[i] = dw;
5257 		}
5258 		for (i = 0; i < dcnt; i++) {
5259 			dw = (__force u32) cpu_to_be32(madpayload_start[i]);
5260 			madpayload_start[i] = dw;
5261 			dw = (__force u32) cpu_to_be32(madpayload_done[i]);
5262 			madpayload_done[i] = dw;
5263 		}
5264 		swapped = 1;
5265 	}
5266 
5267 	data = which ? madpayload_done : madpayload_start;
5268 
5269 	autoneg_7322_sendpkt(ppd, hdr, dcnt, data);
5270 	qib_read_kreg64(dd, kr_scratch);
5271 	udelay(2);
5272 	autoneg_7322_sendpkt(ppd, hdr, dcnt, data);
5273 	qib_read_kreg64(dd, kr_scratch);
5274 	udelay(2);
5275 }
5276 
5277 /*
5278  * Do the absolute minimum to cause an IB speed change, and make it
5279  * ready, but don't actually trigger the change.   The caller will
5280  * do that when ready (if link is in Polling training state, it will
5281  * happen immediately, otherwise when link next goes down)
5282  *
5283  * This routine should only be used as part of the DDR autonegotation
5284  * code for devices that are not compliant with IB 1.2 (or code that
5285  * fixes things up for same).
5286  *
5287  * When link has gone down, and autoneg enabled, or autoneg has
5288  * failed and we give up until next time we set both speeds, and
5289  * then we want IBTA enabled as well as "use max enabled speed.
5290  */
5291 static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed)
5292 {
5293 	u64 newctrlb;
5294 
5295 	newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK |
5296 				    IBA7322_IBC_IBTA_1_2_MASK |
5297 				    IBA7322_IBC_MAX_SPEED_MASK);
5298 
5299 	if (speed & (speed - 1)) /* multiple speeds */
5300 		newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) |
5301 				    IBA7322_IBC_IBTA_1_2_MASK |
5302 				    IBA7322_IBC_MAX_SPEED_MASK;
5303 	else
5304 		newctrlb |= speed == QIB_IB_QDR ?
5305 			IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK :
5306 			((speed == QIB_IB_DDR ?
5307 			  IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR));
5308 
5309 	if (newctrlb == ppd->cpspec->ibcctrl_b)
5310 		return;
5311 
5312 	ppd->cpspec->ibcctrl_b = newctrlb;
5313 	qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b);
5314 	qib_write_kreg(ppd->dd, kr_scratch, 0);
5315 }
5316 
5317 /*
5318  * This routine is only used when we are not talking to another
5319  * IB 1.2-compliant device that we think can do DDR.
5320  * (This includes all existing switch chips as of Oct 2007.)
5321  * 1.2-compliant devices go directly to DDR prior to reaching INIT
5322  */
5323 static void try_7322_autoneg(struct qib_pportdata *ppd)
5324 {
5325 	unsigned long flags;
5326 
5327 	spin_lock_irqsave(&ppd->lflags_lock, flags);
5328 	ppd->lflags |= QIBL_IB_AUTONEG_INPROG;
5329 	spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5330 	qib_autoneg_7322_send(ppd, 0);
5331 	set_7322_ibspeed_fast(ppd, QIB_IB_DDR);
5332 	qib_7322_mini_pcs_reset(ppd);
5333 	/* 2 msec is minimum length of a poll cycle */
5334 	queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work,
5335 			   msecs_to_jiffies(2));
5336 }
5337 
5338 /*
5339  * Handle the empirically determined mechanism for auto-negotiation
5340  * of DDR speed with switches.
5341  */
5342 static void autoneg_7322_work(struct work_struct *work)
5343 {
5344 	struct qib_pportdata *ppd;
5345 	u32 i;
5346 	unsigned long flags;
5347 
5348 	ppd = container_of(work, struct qib_chippport_specific,
5349 			    autoneg_work.work)->ppd;
5350 
5351 	/*
5352 	 * Busy wait for this first part, it should be at most a
5353 	 * few hundred usec, since we scheduled ourselves for 2msec.
5354 	 */
5355 	for (i = 0; i < 25; i++) {
5356 		if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState)
5357 		     == IB_7322_LT_STATE_POLLQUIET) {
5358 			qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE);
5359 			break;
5360 		}
5361 		udelay(100);
5362 	}
5363 
5364 	if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
5365 		goto done; /* we got there early or told to stop */
5366 
5367 	/* we expect this to timeout */
5368 	if (wait_event_timeout(ppd->cpspec->autoneg_wait,
5369 			       !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
5370 			       msecs_to_jiffies(90)))
5371 		goto done;
5372 	qib_7322_mini_pcs_reset(ppd);
5373 
5374 	/* we expect this to timeout */
5375 	if (wait_event_timeout(ppd->cpspec->autoneg_wait,
5376 			       !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
5377 			       msecs_to_jiffies(1700)))
5378 		goto done;
5379 	qib_7322_mini_pcs_reset(ppd);
5380 
5381 	set_7322_ibspeed_fast(ppd, QIB_IB_SDR);
5382 
5383 	/*
5384 	 * Wait up to 250 msec for link to train and get to INIT at DDR;
5385 	 * this should terminate early.
5386 	 */
5387 	wait_event_timeout(ppd->cpspec->autoneg_wait,
5388 		!(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
5389 		msecs_to_jiffies(250));
5390 done:
5391 	if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) {
5392 		spin_lock_irqsave(&ppd->lflags_lock, flags);
5393 		ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
5394 		if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) {
5395 			ppd->lflags |= QIBL_IB_AUTONEG_FAILED;
5396 			ppd->cpspec->autoneg_tries = 0;
5397 		}
5398 		spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5399 		set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
5400 	}
5401 }
5402 
5403 /*
5404  * This routine is used to request IPG set in the QLogic switch.
5405  * Only called if r1.
5406  */
5407 static void try_7322_ipg(struct qib_pportdata *ppd)
5408 {
5409 	struct qib_ibport *ibp = &ppd->ibport_data;
5410 	struct ib_mad_send_buf *send_buf;
5411 	struct ib_mad_agent *agent;
5412 	struct ib_smp *smp;
5413 	unsigned delay;
5414 	int ret;
5415 
5416 	agent = ibp->rvp.send_agent;
5417 	if (!agent)
5418 		goto retry;
5419 
5420 	send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR,
5421 				      IB_MGMT_MAD_DATA, GFP_ATOMIC,
5422 				      IB_MGMT_BASE_VERSION);
5423 	if (IS_ERR(send_buf))
5424 		goto retry;
5425 
5426 	if (!ibp->smi_ah) {
5427 		struct ib_ah *ah;
5428 
5429 		ah = qib_create_qp0_ah(ibp, be16_to_cpu(IB_LID_PERMISSIVE));
5430 		if (IS_ERR(ah))
5431 			ret = PTR_ERR(ah);
5432 		else {
5433 			send_buf->ah = ah;
5434 			ibp->smi_ah = ibah_to_rvtah(ah);
5435 			ret = 0;
5436 		}
5437 	} else {
5438 		send_buf->ah = &ibp->smi_ah->ibah;
5439 		ret = 0;
5440 	}
5441 
5442 	smp = send_buf->mad;
5443 	smp->base_version = IB_MGMT_BASE_VERSION;
5444 	smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE;
5445 	smp->class_version = 1;
5446 	smp->method = IB_MGMT_METHOD_SEND;
5447 	smp->hop_cnt = 1;
5448 	smp->attr_id = QIB_VENDOR_IPG;
5449 	smp->attr_mod = 0;
5450 
5451 	if (!ret)
5452 		ret = ib_post_send_mad(send_buf, NULL);
5453 	if (ret)
5454 		ib_free_send_mad(send_buf);
5455 retry:
5456 	delay = 2 << ppd->cpspec->ipg_tries;
5457 	queue_delayed_work(ib_wq, &ppd->cpspec->ipg_work,
5458 			   msecs_to_jiffies(delay));
5459 }
5460 
5461 /*
5462  * Timeout handler for setting IPG.
5463  * Only called if r1.
5464  */
5465 static void ipg_7322_work(struct work_struct *work)
5466 {
5467 	struct qib_pportdata *ppd;
5468 
5469 	ppd = container_of(work, struct qib_chippport_specific,
5470 			   ipg_work.work)->ppd;
5471 	if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE))
5472 	    && ++ppd->cpspec->ipg_tries <= 10)
5473 		try_7322_ipg(ppd);
5474 }
5475 
5476 static u32 qib_7322_iblink_state(u64 ibcs)
5477 {
5478 	u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState);
5479 
5480 	switch (state) {
5481 	case IB_7322_L_STATE_INIT:
5482 		state = IB_PORT_INIT;
5483 		break;
5484 	case IB_7322_L_STATE_ARM:
5485 		state = IB_PORT_ARMED;
5486 		break;
5487 	case IB_7322_L_STATE_ACTIVE:
5488 	case IB_7322_L_STATE_ACT_DEFER:
5489 		state = IB_PORT_ACTIVE;
5490 		break;
5491 	default:
5492 		fallthrough;
5493 	case IB_7322_L_STATE_DOWN:
5494 		state = IB_PORT_DOWN;
5495 		break;
5496 	}
5497 	return state;
5498 }
5499 
5500 /* returns the IBTA port state, rather than the IBC link training state */
5501 static u8 qib_7322_phys_portstate(u64 ibcs)
5502 {
5503 	u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState);
5504 	return qib_7322_physportstate[state];
5505 }
5506 
5507 static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs)
5508 {
5509 	int ret = 0, symadj = 0;
5510 	unsigned long flags;
5511 	int mult;
5512 
5513 	spin_lock_irqsave(&ppd->lflags_lock, flags);
5514 	ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY;
5515 	spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5516 
5517 	/* Update our picture of width and speed from chip */
5518 	if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) {
5519 		ppd->link_speed_active = QIB_IB_QDR;
5520 		mult = 4;
5521 	} else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) {
5522 		ppd->link_speed_active = QIB_IB_DDR;
5523 		mult = 2;
5524 	} else {
5525 		ppd->link_speed_active = QIB_IB_SDR;
5526 		mult = 1;
5527 	}
5528 	if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) {
5529 		ppd->link_width_active = IB_WIDTH_4X;
5530 		mult *= 4;
5531 	} else
5532 		ppd->link_width_active = IB_WIDTH_1X;
5533 	ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)];
5534 
5535 	if (!ibup) {
5536 		u64 clr;
5537 
5538 		/* Link went down. */
5539 		/* do IPG MAD again after linkdown, even if last time failed */
5540 		ppd->cpspec->ipg_tries = 0;
5541 		clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) &
5542 			(SYM_MASK(IBCStatusB_0, heartbeat_timed_out) |
5543 			 SYM_MASK(IBCStatusB_0, heartbeat_crosstalk));
5544 		if (clr)
5545 			qib_write_kreg_port(ppd, krp_ibcstatus_b, clr);
5546 		if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
5547 				     QIBL_IB_AUTONEG_INPROG)))
5548 			set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
5549 		if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
5550 			struct qib_qsfp_data *qd =
5551 				&ppd->cpspec->qsfp_data;
5552 			/* unlock the Tx settings, speed may change */
5553 			qib_write_kreg_port(ppd, krp_tx_deemph_override,
5554 				SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
5555 				reset_tx_deemphasis_override));
5556 			qib_cancel_sends(ppd);
5557 			/* on link down, ensure sane pcs state */
5558 			qib_7322_mini_pcs_reset(ppd);
5559 			/* schedule the qsfp refresh which should turn the link
5560 			   off */
5561 			if (ppd->dd->flags & QIB_HAS_QSFP) {
5562 				qd->t_insert = jiffies;
5563 				queue_work(ib_wq, &qd->work);
5564 			}
5565 			spin_lock_irqsave(&ppd->sdma_lock, flags);
5566 			if (__qib_sdma_running(ppd))
5567 				__qib_sdma_process_event(ppd,
5568 					qib_sdma_event_e70_go_idle);
5569 			spin_unlock_irqrestore(&ppd->sdma_lock, flags);
5570 		}
5571 		clr = read_7322_creg32_port(ppd, crp_iblinkdown);
5572 		if (clr == ppd->cpspec->iblnkdownsnap)
5573 			ppd->cpspec->iblnkdowndelta++;
5574 	} else {
5575 		if (qib_compat_ddr_negotiate &&
5576 		    !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
5577 				     QIBL_IB_AUTONEG_INPROG)) &&
5578 		    ppd->link_speed_active == QIB_IB_SDR &&
5579 		    (ppd->link_speed_enabled & QIB_IB_DDR)
5580 		    && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) {
5581 			/* we are SDR, and auto-negotiation enabled */
5582 			++ppd->cpspec->autoneg_tries;
5583 			if (!ppd->cpspec->ibdeltainprog) {
5584 				ppd->cpspec->ibdeltainprog = 1;
5585 				ppd->cpspec->ibsymdelta +=
5586 					read_7322_creg32_port(ppd,
5587 						crp_ibsymbolerr) -
5588 						ppd->cpspec->ibsymsnap;
5589 				ppd->cpspec->iblnkerrdelta +=
5590 					read_7322_creg32_port(ppd,
5591 						crp_iblinkerrrecov) -
5592 						ppd->cpspec->iblnkerrsnap;
5593 			}
5594 			try_7322_autoneg(ppd);
5595 			ret = 1; /* no other IB status change processing */
5596 		} else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
5597 			   ppd->link_speed_active == QIB_IB_SDR) {
5598 			qib_autoneg_7322_send(ppd, 1);
5599 			set_7322_ibspeed_fast(ppd, QIB_IB_DDR);
5600 			qib_7322_mini_pcs_reset(ppd);
5601 			udelay(2);
5602 			ret = 1; /* no other IB status change processing */
5603 		} else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
5604 			   (ppd->link_speed_active & QIB_IB_DDR)) {
5605 			spin_lock_irqsave(&ppd->lflags_lock, flags);
5606 			ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG |
5607 					 QIBL_IB_AUTONEG_FAILED);
5608 			spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5609 			ppd->cpspec->autoneg_tries = 0;
5610 			/* re-enable SDR, for next link down */
5611 			set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
5612 			wake_up(&ppd->cpspec->autoneg_wait);
5613 			symadj = 1;
5614 		} else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) {
5615 			/*
5616 			 * Clear autoneg failure flag, and do setup
5617 			 * so we'll try next time link goes down and
5618 			 * back to INIT (possibly connected to a
5619 			 * different device).
5620 			 */
5621 			spin_lock_irqsave(&ppd->lflags_lock, flags);
5622 			ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
5623 			spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5624 			ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK;
5625 			symadj = 1;
5626 		}
5627 		if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
5628 			symadj = 1;
5629 			if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10)
5630 				try_7322_ipg(ppd);
5631 			if (!ppd->cpspec->recovery_init)
5632 				setup_7322_link_recovery(ppd, 0);
5633 			ppd->cpspec->qdr_dfe_time = jiffies +
5634 				msecs_to_jiffies(QDR_DFE_DISABLE_DELAY);
5635 		}
5636 		ppd->cpspec->ibmalfusesnap = 0;
5637 		ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd,
5638 			crp_errlink);
5639 	}
5640 	if (symadj) {
5641 		ppd->cpspec->iblnkdownsnap =
5642 			read_7322_creg32_port(ppd, crp_iblinkdown);
5643 		if (ppd->cpspec->ibdeltainprog) {
5644 			ppd->cpspec->ibdeltainprog = 0;
5645 			ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd,
5646 				crp_ibsymbolerr) - ppd->cpspec->ibsymsnap;
5647 			ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd,
5648 				crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap;
5649 		}
5650 	} else if (!ibup && qib_compat_ddr_negotiate &&
5651 		   !ppd->cpspec->ibdeltainprog &&
5652 			!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
5653 		ppd->cpspec->ibdeltainprog = 1;
5654 		ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd,
5655 			crp_ibsymbolerr);
5656 		ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd,
5657 			crp_iblinkerrrecov);
5658 	}
5659 
5660 	if (!ret)
5661 		qib_setup_7322_setextled(ppd, ibup);
5662 	return ret;
5663 }
5664 
5665 /*
5666  * Does read/modify/write to appropriate registers to
5667  * set output and direction bits selected by mask.
5668  * these are in their canonical postions (e.g. lsb of
5669  * dir will end up in D48 of extctrl on existing chips).
5670  * returns contents of GP Inputs.
5671  */
5672 static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask)
5673 {
5674 	u64 read_val, new_out;
5675 	unsigned long flags;
5676 
5677 	if (mask) {
5678 		/* some bits being written, lock access to GPIO */
5679 		dir &= mask;
5680 		out &= mask;
5681 		spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
5682 		dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe));
5683 		dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe));
5684 		new_out = (dd->cspec->gpio_out & ~mask) | out;
5685 
5686 		qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
5687 		qib_write_kreg(dd, kr_gpio_out, new_out);
5688 		dd->cspec->gpio_out = new_out;
5689 		spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
5690 	}
5691 	/*
5692 	 * It is unlikely that a read at this time would get valid
5693 	 * data on a pin whose direction line was set in the same
5694 	 * call to this function. We include the read here because
5695 	 * that allows us to potentially combine a change on one pin with
5696 	 * a read on another, and because the old code did something like
5697 	 * this.
5698 	 */
5699 	read_val = qib_read_kreg64(dd, kr_extstatus);
5700 	return SYM_FIELD(read_val, EXTStatus, GPIOIn);
5701 }
5702 
5703 /* Enable writes to config EEPROM, if possible. Returns previous state */
5704 static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen)
5705 {
5706 	int prev_wen;
5707 	u32 mask;
5708 
5709 	mask = 1 << QIB_EEPROM_WEN_NUM;
5710 	prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM;
5711 	gpio_7322_mod(dd, wen ? 0 : mask, mask, mask);
5712 
5713 	return prev_wen & 1;
5714 }
5715 
5716 /*
5717  * Read fundamental info we need to use the chip.  These are
5718  * the registers that describe chip capabilities, and are
5719  * saved in shadow registers.
5720  */
5721 static void get_7322_chip_params(struct qib_devdata *dd)
5722 {
5723 	u64 val;
5724 	u32 piobufs;
5725 	int mtu;
5726 
5727 	dd->palign = qib_read_kreg32(dd, kr_pagealign);
5728 
5729 	dd->uregbase = qib_read_kreg32(dd, kr_userregbase);
5730 
5731 	dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt);
5732 	dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase);
5733 	dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase);
5734 	dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase);
5735 	dd->pio2k_bufbase = dd->piobufbase & 0xffffffff;
5736 
5737 	val = qib_read_kreg64(dd, kr_sendpiobufcnt);
5738 	dd->piobcnt2k = val & ~0U;
5739 	dd->piobcnt4k = val >> 32;
5740 	val = qib_read_kreg64(dd, kr_sendpiosize);
5741 	dd->piosize2k = val & ~0U;
5742 	dd->piosize4k = val >> 32;
5743 
5744 	mtu = ib_mtu_enum_to_int(qib_ibmtu);
5745 	if (mtu == -1)
5746 		mtu = QIB_DEFAULT_MTU;
5747 	dd->pport[0].ibmtu = (u32)mtu;
5748 	dd->pport[1].ibmtu = (u32)mtu;
5749 
5750 	/* these may be adjusted in init_chip_wc_pat() */
5751 	dd->pio2kbase = (u32 __iomem *)
5752 		((char __iomem *) dd->kregbase + dd->pio2k_bufbase);
5753 	dd->pio4kbase = (u32 __iomem *)
5754 		((char __iomem *) dd->kregbase +
5755 		 (dd->piobufbase >> 32));
5756 	/*
5757 	 * 4K buffers take 2 pages; we use roundup just to be
5758 	 * paranoid; we calculate it once here, rather than on
5759 	 * ever buf allocate
5760 	 */
5761 	dd->align4k = ALIGN(dd->piosize4k, dd->palign);
5762 
5763 	piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS;
5764 
5765 	dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) /
5766 		(sizeof(u64) * BITS_PER_BYTE / 2);
5767 }
5768 
5769 /*
5770  * The chip base addresses in cspec and cpspec have to be set
5771  * after possible init_chip_wc_pat(), rather than in
5772  * get_7322_chip_params(), so split out as separate function
5773  */
5774 static void qib_7322_set_baseaddrs(struct qib_devdata *dd)
5775 {
5776 	u32 cregbase;
5777 
5778 	cregbase = qib_read_kreg32(dd, kr_counterregbase);
5779 
5780 	dd->cspec->cregbase = (u64 __iomem *)(cregbase +
5781 		(char __iomem *)dd->kregbase);
5782 
5783 	dd->egrtidbase = (u64 __iomem *)
5784 		((char __iomem *) dd->kregbase + dd->rcvegrbase);
5785 
5786 	/* port registers are defined as relative to base of chip */
5787 	dd->pport[0].cpspec->kpregbase =
5788 		(u64 __iomem *)((char __iomem *)dd->kregbase);
5789 	dd->pport[1].cpspec->kpregbase =
5790 		(u64 __iomem *)(dd->palign +
5791 		(char __iomem *)dd->kregbase);
5792 	dd->pport[0].cpspec->cpregbase =
5793 		(u64 __iomem *)(qib_read_kreg_port(&dd->pport[0],
5794 		kr_counterregbase) + (char __iomem *)dd->kregbase);
5795 	dd->pport[1].cpspec->cpregbase =
5796 		(u64 __iomem *)(qib_read_kreg_port(&dd->pport[1],
5797 		kr_counterregbase) + (char __iomem *)dd->kregbase);
5798 }
5799 
5800 /*
5801  * This is a fairly special-purpose observer, so we only support
5802  * the port-specific parts of SendCtrl
5803  */
5804 
5805 #define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) |		\
5806 			   SYM_MASK(SendCtrl_0, SDmaEnable) |		\
5807 			   SYM_MASK(SendCtrl_0, SDmaIntEnable) |	\
5808 			   SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \
5809 			   SYM_MASK(SendCtrl_0, SDmaHalt) |		\
5810 			   SYM_MASK(SendCtrl_0, IBVLArbiterEn) |	\
5811 			   SYM_MASK(SendCtrl_0, ForceCreditUpToDate))
5812 
5813 static int sendctrl_hook(struct qib_devdata *dd,
5814 			 const struct diag_observer *op, u32 offs,
5815 			 u64 *data, u64 mask, int only_32)
5816 {
5817 	unsigned long flags;
5818 	unsigned idx;
5819 	unsigned pidx;
5820 	struct qib_pportdata *ppd = NULL;
5821 	u64 local_data, all_bits;
5822 
5823 	/*
5824 	 * The fixed correspondence between Physical ports and pports is
5825 	 * severed. We need to hunt for the ppd that corresponds
5826 	 * to the offset we got. And we have to do that without admitting
5827 	 * we know the stride, apparently.
5828 	 */
5829 	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
5830 		u64 __iomem *psptr;
5831 		u32 psoffs;
5832 
5833 		ppd = dd->pport + pidx;
5834 		if (!ppd->cpspec->kpregbase)
5835 			continue;
5836 
5837 		psptr = ppd->cpspec->kpregbase + krp_sendctrl;
5838 		psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr);
5839 		if (psoffs == offs)
5840 			break;
5841 	}
5842 
5843 	/* If pport is not being managed by driver, just avoid shadows. */
5844 	if (pidx >= dd->num_pports)
5845 		ppd = NULL;
5846 
5847 	/* In any case, "idx" is flat index in kreg space */
5848 	idx = offs / sizeof(u64);
5849 
5850 	all_bits = ~0ULL;
5851 	if (only_32)
5852 		all_bits >>= 32;
5853 
5854 	spin_lock_irqsave(&dd->sendctrl_lock, flags);
5855 	if (!ppd || (mask & all_bits) != all_bits) {
5856 		/*
5857 		 * At least some mask bits are zero, so we need
5858 		 * to read. The judgement call is whether from
5859 		 * reg or shadow. First-cut: read reg, and complain
5860 		 * if any bits which should be shadowed are different
5861 		 * from their shadowed value.
5862 		 */
5863 		if (only_32)
5864 			local_data = (u64)qib_read_kreg32(dd, idx);
5865 		else
5866 			local_data = qib_read_kreg64(dd, idx);
5867 		*data = (local_data & ~mask) | (*data & mask);
5868 	}
5869 	if (mask) {
5870 		/*
5871 		 * At least some mask bits are one, so we need
5872 		 * to write, but only shadow some bits.
5873 		 */
5874 		u64 sval, tval; /* Shadowed, transient */
5875 
5876 		/*
5877 		 * New shadow val is bits we don't want to touch,
5878 		 * ORed with bits we do, that are intended for shadow.
5879 		 */
5880 		if (ppd) {
5881 			sval = ppd->p_sendctrl & ~mask;
5882 			sval |= *data & SENDCTRL_SHADOWED & mask;
5883 			ppd->p_sendctrl = sval;
5884 		} else
5885 			sval = *data & SENDCTRL_SHADOWED & mask;
5886 		tval = sval | (*data & ~SENDCTRL_SHADOWED & mask);
5887 		qib_write_kreg(dd, idx, tval);
5888 		qib_write_kreg(dd, kr_scratch, 0Ull);
5889 	}
5890 	spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
5891 	return only_32 ? 4 : 8;
5892 }
5893 
5894 static const struct diag_observer sendctrl_0_observer = {
5895 	sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64),
5896 	KREG_IDX(SendCtrl_0) * sizeof(u64)
5897 };
5898 
5899 static const struct diag_observer sendctrl_1_observer = {
5900 	sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64),
5901 	KREG_IDX(SendCtrl_1) * sizeof(u64)
5902 };
5903 
5904 static ushort sdma_fetch_prio = 8;
5905 module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO);
5906 MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority");
5907 
5908 /* Besides logging QSFP events, we set appropriate TxDDS values */
5909 static void init_txdds_table(struct qib_pportdata *ppd, int override);
5910 
5911 static void qsfp_7322_event(struct work_struct *work)
5912 {
5913 	struct qib_qsfp_data *qd;
5914 	struct qib_pportdata *ppd;
5915 	unsigned long pwrup;
5916 	unsigned long flags;
5917 	int ret;
5918 	u32 le2;
5919 
5920 	qd = container_of(work, struct qib_qsfp_data, work);
5921 	ppd = qd->ppd;
5922 	pwrup = qd->t_insert +
5923 		msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC);
5924 
5925 	/* Delay for 20 msecs to allow ModPrs resistor to setup */
5926 	mdelay(QSFP_MODPRS_LAG_MSEC);
5927 
5928 	if (!qib_qsfp_mod_present(ppd)) {
5929 		ppd->cpspec->qsfp_data.modpresent = 0;
5930 		/* Set the physical link to disabled */
5931 		qib_set_ib_7322_lstate(ppd, 0,
5932 				       QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
5933 		spin_lock_irqsave(&ppd->lflags_lock, flags);
5934 		ppd->lflags &= ~QIBL_LINKV;
5935 		spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5936 	} else {
5937 		/*
5938 		 * Some QSFP's not only do not respond until the full power-up
5939 		 * time, but may behave badly if we try. So hold off responding
5940 		 * to insertion.
5941 		 */
5942 		while (1) {
5943 			if (time_is_before_jiffies(pwrup))
5944 				break;
5945 			msleep(20);
5946 		}
5947 
5948 		ret = qib_refresh_qsfp_cache(ppd, &qd->cache);
5949 
5950 		/*
5951 		 * Need to change LE2 back to defaults if we couldn't
5952 		 * read the cable type (to handle cable swaps), so do this
5953 		 * even on failure to read cable information.  We don't
5954 		 * get here for QME, so IS_QME check not needed here.
5955 		 */
5956 		if (!ret && !ppd->dd->cspec->r1) {
5957 			if (QSFP_IS_ACTIVE_FAR(qd->cache.tech))
5958 				le2 = LE2_QME;
5959 			else if (qd->cache.atten[1] >= qib_long_atten &&
5960 				 QSFP_IS_CU(qd->cache.tech))
5961 				le2 = LE2_5m;
5962 			else
5963 				le2 = LE2_DEFAULT;
5964 		} else
5965 			le2 = LE2_DEFAULT;
5966 		ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7));
5967 		/*
5968 		 * We always change parameteters, since we can choose
5969 		 * values for cables without eeproms, and the cable may have
5970 		 * changed from a cable with full or partial eeprom content
5971 		 * to one with partial or no content.
5972 		 */
5973 		init_txdds_table(ppd, 0);
5974 		/* The physical link is being re-enabled only when the
5975 		 * previous state was DISABLED and the VALID bit is not
5976 		 * set. This should only happen when  the cable has been
5977 		 * physically pulled. */
5978 		if (!ppd->cpspec->qsfp_data.modpresent &&
5979 		    (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) {
5980 			ppd->cpspec->qsfp_data.modpresent = 1;
5981 			qib_set_ib_7322_lstate(ppd, 0,
5982 				QLOGIC_IB_IBCC_LINKINITCMD_SLEEP);
5983 			spin_lock_irqsave(&ppd->lflags_lock, flags);
5984 			ppd->lflags |= QIBL_LINKV;
5985 			spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5986 		}
5987 	}
5988 }
5989 
5990 /*
5991  * There is little we can do but complain to the user if QSFP
5992  * initialization fails.
5993  */
5994 static void qib_init_7322_qsfp(struct qib_pportdata *ppd)
5995 {
5996 	unsigned long flags;
5997 	struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data;
5998 	struct qib_devdata *dd = ppd->dd;
5999 	u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N;
6000 
6001 	mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx);
6002 	qd->ppd = ppd;
6003 	qib_qsfp_init(qd, qsfp_7322_event);
6004 	spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
6005 	dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert));
6006 	dd->cspec->gpio_mask |= mod_prs_bit;
6007 	qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
6008 	qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
6009 	spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
6010 }
6011 
6012 /*
6013  * called at device initialization time, and also if the txselect
6014  * module parameter is changed.  This is used for cables that don't
6015  * have valid QSFP EEPROMs (not present, or attenuation is zero).
6016  * We initialize to the default, then if there is a specific
6017  * unit,port match, we use that (and set it immediately, for the
6018  * current speed, if the link is at INIT or better).
6019  * String format is "default# unit#,port#=# ... u,p=#", separators must
6020  * be a SPACE character.  A newline terminates.  The u,p=# tuples may
6021  * optionally have "u,p=#,#", where the final # is the H1 value
6022  * The last specific match is used (actually, all are used, but last
6023  * one is the one that winds up set); if none at all, fall back on default.
6024  */
6025 static void set_no_qsfp_atten(struct qib_devdata *dd, int change)
6026 {
6027 	char *nxt, *str;
6028 	u32 pidx, unit, port, deflt, h1;
6029 	unsigned long val;
6030 	int any = 0, seth1;
6031 	int txdds_size;
6032 
6033 	str = txselect_list;
6034 
6035 	/* default number is validated in setup_txselect() */
6036 	deflt = simple_strtoul(str, &nxt, 0);
6037 	for (pidx = 0; pidx < dd->num_pports; ++pidx)
6038 		dd->pport[pidx].cpspec->no_eep = deflt;
6039 
6040 	txdds_size = TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ;
6041 	if (IS_QME(dd) || IS_QMH(dd))
6042 		txdds_size += TXDDS_MFG_SZ;
6043 
6044 	while (*nxt && nxt[1]) {
6045 		str = ++nxt;
6046 		unit = simple_strtoul(str, &nxt, 0);
6047 		if (nxt == str || !*nxt || *nxt != ',') {
6048 			while (*nxt && *nxt++ != ' ') /* skip to next, if any */
6049 				;
6050 			continue;
6051 		}
6052 		str = ++nxt;
6053 		port = simple_strtoul(str, &nxt, 0);
6054 		if (nxt == str || *nxt != '=') {
6055 			while (*nxt && *nxt++ != ' ') /* skip to next, if any */
6056 				;
6057 			continue;
6058 		}
6059 		str = ++nxt;
6060 		val = simple_strtoul(str, &nxt, 0);
6061 		if (nxt == str) {
6062 			while (*nxt && *nxt++ != ' ') /* skip to next, if any */
6063 				;
6064 			continue;
6065 		}
6066 		if (val >= txdds_size)
6067 			continue;
6068 		seth1 = 0;
6069 		h1 = 0; /* gcc thinks it might be used uninitted */
6070 		if (*nxt == ',' && nxt[1]) {
6071 			str = ++nxt;
6072 			h1 = (u32)simple_strtoul(str, &nxt, 0);
6073 			if (nxt == str)
6074 				while (*nxt && *nxt++ != ' ') /* skip */
6075 					;
6076 			else
6077 				seth1 = 1;
6078 		}
6079 		for (pidx = 0; dd->unit == unit && pidx < dd->num_pports;
6080 		     ++pidx) {
6081 			struct qib_pportdata *ppd = &dd->pport[pidx];
6082 
6083 			if (ppd->port != port || !ppd->link_speed_supported)
6084 				continue;
6085 			ppd->cpspec->no_eep = val;
6086 			if (seth1)
6087 				ppd->cpspec->h1_val = h1;
6088 			/* now change the IBC and serdes, overriding generic */
6089 			init_txdds_table(ppd, 1);
6090 			/* Re-enable the physical state machine on mezz boards
6091 			 * now that the correct settings have been set.
6092 			 * QSFP boards are handles by the QSFP event handler */
6093 			if (IS_QMH(dd) || IS_QME(dd))
6094 				qib_set_ib_7322_lstate(ppd, 0,
6095 					    QLOGIC_IB_IBCC_LINKINITCMD_SLEEP);
6096 			any++;
6097 		}
6098 		if (*nxt == '\n')
6099 			break; /* done */
6100 	}
6101 	if (change && !any) {
6102 		/* no specific setting, use the default.
6103 		 * Change the IBC and serdes, but since it's
6104 		 * general, don't override specific settings.
6105 		 */
6106 		for (pidx = 0; pidx < dd->num_pports; ++pidx)
6107 			if (dd->pport[pidx].link_speed_supported)
6108 				init_txdds_table(&dd->pport[pidx], 0);
6109 	}
6110 }
6111 
6112 /* handle the txselect parameter changing */
6113 static int setup_txselect(const char *str, const struct kernel_param *kp)
6114 {
6115 	struct qib_devdata *dd;
6116 	unsigned long index, val;
6117 	char *n;
6118 
6119 	if (strlen(str) >= ARRAY_SIZE(txselect_list)) {
6120 		pr_info("txselect_values string too long\n");
6121 		return -ENOSPC;
6122 	}
6123 	val = simple_strtoul(str, &n, 0);
6124 	if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ +
6125 				TXDDS_MFG_SZ)) {
6126 		pr_info("txselect_values must start with a number < %d\n",
6127 			TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ);
6128 		return -EINVAL;
6129 	}
6130 	strncpy(txselect_list, str, ARRAY_SIZE(txselect_list) - 1);
6131 
6132 	xa_for_each(&qib_dev_table, index, dd)
6133 		if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322)
6134 			set_no_qsfp_atten(dd, 1);
6135 	return 0;
6136 }
6137 
6138 /*
6139  * Write the final few registers that depend on some of the
6140  * init setup.  Done late in init, just before bringing up
6141  * the serdes.
6142  */
6143 static int qib_late_7322_initreg(struct qib_devdata *dd)
6144 {
6145 	int ret = 0, n;
6146 	u64 val;
6147 
6148 	qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize);
6149 	qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize);
6150 	qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt);
6151 	qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
6152 	val = qib_read_kreg64(dd, kr_sendpioavailaddr);
6153 	if (val != dd->pioavailregs_phys) {
6154 		qib_dev_err(dd,
6155 			"Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
6156 			(unsigned long) dd->pioavailregs_phys,
6157 			(unsigned long long) val);
6158 		ret = -EINVAL;
6159 	}
6160 
6161 	n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS;
6162 	qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL);
6163 	/* driver sends get pkey, lid, etc. checking also, to catch bugs */
6164 	qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL);
6165 
6166 	qib_register_observer(dd, &sendctrl_0_observer);
6167 	qib_register_observer(dd, &sendctrl_1_observer);
6168 
6169 	dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN;
6170 	qib_write_kreg(dd, kr_control, dd->control);
6171 	/*
6172 	 * Set SendDmaFetchPriority and init Tx params, including
6173 	 * QSFP handler on boards that have QSFP.
6174 	 * First set our default attenuation entry for cables that
6175 	 * don't have valid attenuation.
6176 	 */
6177 	set_no_qsfp_atten(dd, 0);
6178 	for (n = 0; n < dd->num_pports; ++n) {
6179 		struct qib_pportdata *ppd = dd->pport + n;
6180 
6181 		qib_write_kreg_port(ppd, krp_senddmaprioritythld,
6182 				    sdma_fetch_prio & 0xf);
6183 		/* Initialize qsfp if present on board. */
6184 		if (dd->flags & QIB_HAS_QSFP)
6185 			qib_init_7322_qsfp(ppd);
6186 	}
6187 	dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN;
6188 	qib_write_kreg(dd, kr_control, dd->control);
6189 
6190 	return ret;
6191 }
6192 
6193 /* per IB port errors.  */
6194 #define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \
6195 	MASK_ACROSS(8, 15))
6196 #define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41))
6197 #define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \
6198 	MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \
6199 	MASK_ACROSS(0, 11))
6200 
6201 /*
6202  * Write the initialization per-port registers that need to be done at
6203  * driver load and after reset completes (i.e., that aren't done as part
6204  * of other init procedures called from qib_init.c).
6205  * Some of these should be redundant on reset, but play safe.
6206  */
6207 static void write_7322_init_portregs(struct qib_pportdata *ppd)
6208 {
6209 	u64 val;
6210 	int i;
6211 
6212 	if (!ppd->link_speed_supported) {
6213 		/* no buffer credits for this port */
6214 		for (i = 1; i < 8; i++)
6215 			qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0);
6216 		qib_write_kreg_port(ppd, krp_ibcctrl_b, 0);
6217 		qib_write_kreg(ppd->dd, kr_scratch, 0);
6218 		return;
6219 	}
6220 
6221 	/*
6222 	 * Set the number of supported virtual lanes in IBC,
6223 	 * for flow control packet handling on unsupported VLs
6224 	 */
6225 	val = qib_read_kreg_port(ppd, krp_ibsdtestiftx);
6226 	val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP);
6227 	val |= (u64)(ppd->vls_supported - 1) <<
6228 		SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP);
6229 	qib_write_kreg_port(ppd, krp_ibsdtestiftx, val);
6230 
6231 	qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP);
6232 
6233 	/* enable tx header checking */
6234 	qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY |
6235 			    IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID |
6236 			    IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ);
6237 
6238 	qib_write_kreg_port(ppd, krp_ncmodectrl,
6239 		SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal));
6240 
6241 	/*
6242 	 * Unconditionally clear the bufmask bits.  If SDMA is
6243 	 * enabled, we'll set them appropriately later.
6244 	 */
6245 	qib_write_kreg_port(ppd, krp_senddmabufmask0, 0);
6246 	qib_write_kreg_port(ppd, krp_senddmabufmask1, 0);
6247 	qib_write_kreg_port(ppd, krp_senddmabufmask2, 0);
6248 	if (ppd->dd->cspec->r1)
6249 		ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate);
6250 }
6251 
6252 /*
6253  * Write the initialization per-device registers that need to be done at
6254  * driver load and after reset completes (i.e., that aren't done as part
6255  * of other init procedures called from qib_init.c).  Also write per-port
6256  * registers that are affected by overall device config, such as QP mapping
6257  * Some of these should be redundant on reset, but play safe.
6258  */
6259 static void write_7322_initregs(struct qib_devdata *dd)
6260 {
6261 	struct qib_pportdata *ppd;
6262 	int i, pidx;
6263 	u64 val;
6264 
6265 	/* Set Multicast QPs received by port 2 to map to context one. */
6266 	qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1);
6267 
6268 	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
6269 		unsigned n, regno;
6270 		unsigned long flags;
6271 
6272 		if (dd->n_krcv_queues < 2 ||
6273 			!dd->pport[pidx].link_speed_supported)
6274 			continue;
6275 
6276 		ppd = &dd->pport[pidx];
6277 
6278 		/* be paranoid against later code motion, etc. */
6279 		spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
6280 		ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable);
6281 		spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
6282 
6283 		/* Initialize QP to context mapping */
6284 		regno = krp_rcvqpmaptable;
6285 		val = 0;
6286 		if (dd->num_pports > 1)
6287 			n = dd->first_user_ctxt / dd->num_pports;
6288 		else
6289 			n = dd->first_user_ctxt - 1;
6290 		for (i = 0; i < 32; ) {
6291 			unsigned ctxt;
6292 
6293 			if (dd->num_pports > 1)
6294 				ctxt = (i % n) * dd->num_pports + pidx;
6295 			else if (i % n)
6296 				ctxt = (i % n) + 1;
6297 			else
6298 				ctxt = ppd->hw_pidx;
6299 			val |= ctxt << (5 * (i % 6));
6300 			i++;
6301 			if (i % 6 == 0) {
6302 				qib_write_kreg_port(ppd, regno, val);
6303 				val = 0;
6304 				regno++;
6305 			}
6306 		}
6307 		qib_write_kreg_port(ppd, regno, val);
6308 	}
6309 
6310 	/*
6311 	 * Setup up interrupt mitigation for kernel contexts, but
6312 	 * not user contexts (user contexts use interrupts when
6313 	 * stalled waiting for any packet, so want those interrupts
6314 	 * right away).
6315 	 */
6316 	for (i = 0; i < dd->first_user_ctxt; i++) {
6317 		dd->cspec->rcvavail_timeout[i] = rcv_int_timeout;
6318 		qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout);
6319 	}
6320 
6321 	/*
6322 	 * Initialize  as (disabled) rcvflow tables.  Application code
6323 	 * will setup each flow as it uses the flow.
6324 	 * Doesn't clear any of the error bits that might be set.
6325 	 */
6326 	val = TIDFLOW_ERRBITS; /* these are W1C */
6327 	for (i = 0; i < dd->cfgctxts; i++) {
6328 		int flow;
6329 
6330 		for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++)
6331 			qib_write_ureg(dd, ur_rcvflowtable+flow, val, i);
6332 	}
6333 
6334 	/*
6335 	 * dual cards init to dual port recovery, single port cards to
6336 	 * the one port.  Dual port cards may later adjust to 1 port,
6337 	 * and then back to dual port if both ports are connected
6338 	 * */
6339 	if (dd->num_pports)
6340 		setup_7322_link_recovery(dd->pport, dd->num_pports > 1);
6341 }
6342 
6343 static int qib_init_7322_variables(struct qib_devdata *dd)
6344 {
6345 	struct qib_pportdata *ppd;
6346 	unsigned features, pidx, sbufcnt;
6347 	int ret, mtu;
6348 	u32 sbufs, updthresh;
6349 	resource_size_t vl15off;
6350 
6351 	/* pport structs are contiguous, allocated after devdata */
6352 	ppd = (struct qib_pportdata *)(dd + 1);
6353 	dd->pport = ppd;
6354 	ppd[0].dd = dd;
6355 	ppd[1].dd = dd;
6356 
6357 	dd->cspec = (struct qib_chip_specific *)(ppd + 2);
6358 
6359 	ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1);
6360 	ppd[1].cpspec = &ppd[0].cpspec[1];
6361 	ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */
6362 	ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */
6363 
6364 	spin_lock_init(&dd->cspec->rcvmod_lock);
6365 	spin_lock_init(&dd->cspec->gpio_lock);
6366 
6367 	/* we haven't yet set QIB_PRESENT, so use read directly */
6368 	dd->revision = readq(&dd->kregbase[kr_revision]);
6369 
6370 	if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
6371 		qib_dev_err(dd,
6372 			"Revision register read failure, giving up initialization\n");
6373 		ret = -ENODEV;
6374 		goto bail;
6375 	}
6376 	dd->flags |= QIB_PRESENT;  /* now register routines work */
6377 
6378 	dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor);
6379 	dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor);
6380 	dd->cspec->r1 = dd->minrev == 1;
6381 
6382 	get_7322_chip_params(dd);
6383 	features = qib_7322_boardname(dd);
6384 
6385 	/* now that piobcnt2k and 4k set, we can allocate these */
6386 	sbufcnt = dd->piobcnt2k + dd->piobcnt4k +
6387 		NUM_VL15_BUFS + BITS_PER_LONG - 1;
6388 	sbufcnt /= BITS_PER_LONG;
6389 	dd->cspec->sendchkenable =
6390 		kmalloc_array(sbufcnt, sizeof(*dd->cspec->sendchkenable),
6391 			      GFP_KERNEL);
6392 	dd->cspec->sendgrhchk =
6393 		kmalloc_array(sbufcnt, sizeof(*dd->cspec->sendgrhchk),
6394 			      GFP_KERNEL);
6395 	dd->cspec->sendibchk =
6396 		kmalloc_array(sbufcnt, sizeof(*dd->cspec->sendibchk),
6397 			      GFP_KERNEL);
6398 	if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk ||
6399 		!dd->cspec->sendibchk) {
6400 		ret = -ENOMEM;
6401 		goto bail;
6402 	}
6403 
6404 	ppd = dd->pport;
6405 
6406 	/*
6407 	 * GPIO bits for TWSI data and clock,
6408 	 * used for serial EEPROM.
6409 	 */
6410 	dd->gpio_sda_num = _QIB_GPIO_SDA_NUM;
6411 	dd->gpio_scl_num = _QIB_GPIO_SCL_NUM;
6412 	dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV;
6413 
6414 	dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY |
6415 		QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP |
6416 		QIB_HAS_THRESH_UPDATE |
6417 		(sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0);
6418 	dd->flags |= qib_special_trigger ?
6419 		QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA;
6420 
6421 	/*
6422 	 * Setup initial values.  These may change when PAT is enabled, but
6423 	 * we need these to do initial chip register accesses.
6424 	 */
6425 	qib_7322_set_baseaddrs(dd);
6426 
6427 	mtu = ib_mtu_enum_to_int(qib_ibmtu);
6428 	if (mtu == -1)
6429 		mtu = QIB_DEFAULT_MTU;
6430 
6431 	dd->cspec->int_enable_mask = QIB_I_BITSEXTANT;
6432 	/* all hwerrors become interrupts, unless special purposed */
6433 	dd->cspec->hwerrmask = ~0ULL;
6434 	/*  link_recovery setup causes these errors, so ignore them,
6435 	 *  other than clearing them when they occur */
6436 	dd->cspec->hwerrmask &=
6437 		~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) |
6438 		  SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) |
6439 		  HWE_MASK(LATriggered));
6440 
6441 	for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) {
6442 		struct qib_chippport_specific *cp = ppd->cpspec;
6443 
6444 		ppd->link_speed_supported = features & PORT_SPD_CAP;
6445 		features >>=  PORT_SPD_CAP_SHIFT;
6446 		if (!ppd->link_speed_supported) {
6447 			/* single port mode (7340, or configured) */
6448 			dd->skip_kctxt_mask |= 1 << pidx;
6449 			if (pidx == 0) {
6450 				/* Make sure port is disabled. */
6451 				qib_write_kreg_port(ppd, krp_rcvctrl, 0);
6452 				qib_write_kreg_port(ppd, krp_ibcctrl_a, 0);
6453 				ppd[0] = ppd[1];
6454 				dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask,
6455 						  IBSerdesPClkNotDetectMask_0)
6456 						  | SYM_MASK(HwErrMask,
6457 						  SDmaMemReadErrMask_0));
6458 				dd->cspec->int_enable_mask &= ~(
6459 				     SYM_MASK(IntMask, SDmaCleanupDoneMask_0) |
6460 				     SYM_MASK(IntMask, SDmaIdleIntMask_0) |
6461 				     SYM_MASK(IntMask, SDmaProgressIntMask_0) |
6462 				     SYM_MASK(IntMask, SDmaIntMask_0) |
6463 				     SYM_MASK(IntMask, ErrIntMask_0) |
6464 				     SYM_MASK(IntMask, SendDoneIntMask_0));
6465 			} else {
6466 				/* Make sure port is disabled. */
6467 				qib_write_kreg_port(ppd, krp_rcvctrl, 0);
6468 				qib_write_kreg_port(ppd, krp_ibcctrl_a, 0);
6469 				dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask,
6470 						  IBSerdesPClkNotDetectMask_1)
6471 						  | SYM_MASK(HwErrMask,
6472 						  SDmaMemReadErrMask_1));
6473 				dd->cspec->int_enable_mask &= ~(
6474 				     SYM_MASK(IntMask, SDmaCleanupDoneMask_1) |
6475 				     SYM_MASK(IntMask, SDmaIdleIntMask_1) |
6476 				     SYM_MASK(IntMask, SDmaProgressIntMask_1) |
6477 				     SYM_MASK(IntMask, SDmaIntMask_1) |
6478 				     SYM_MASK(IntMask, ErrIntMask_1) |
6479 				     SYM_MASK(IntMask, SendDoneIntMask_1));
6480 			}
6481 			continue;
6482 		}
6483 
6484 		dd->num_pports++;
6485 		ret = qib_init_pportdata(ppd, dd, pidx, dd->num_pports);
6486 		if (ret) {
6487 			dd->num_pports--;
6488 			goto bail;
6489 		}
6490 
6491 		ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
6492 		ppd->link_width_enabled = IB_WIDTH_4X;
6493 		ppd->link_speed_enabled = ppd->link_speed_supported;
6494 		/*
6495 		 * Set the initial values to reasonable default, will be set
6496 		 * for real when link is up.
6497 		 */
6498 		ppd->link_width_active = IB_WIDTH_4X;
6499 		ppd->link_speed_active = QIB_IB_SDR;
6500 		ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS];
6501 		switch (qib_num_cfg_vls) {
6502 		case 1:
6503 			ppd->vls_supported = IB_VL_VL0;
6504 			break;
6505 		case 2:
6506 			ppd->vls_supported = IB_VL_VL0_1;
6507 			break;
6508 		default:
6509 			qib_devinfo(dd->pcidev,
6510 				    "Invalid num_vls %u, using 4 VLs\n",
6511 				    qib_num_cfg_vls);
6512 			qib_num_cfg_vls = 4;
6513 			fallthrough;
6514 		case 4:
6515 			ppd->vls_supported = IB_VL_VL0_3;
6516 			break;
6517 		case 8:
6518 			if (mtu <= 2048)
6519 				ppd->vls_supported = IB_VL_VL0_7;
6520 			else {
6521 				qib_devinfo(dd->pcidev,
6522 					    "Invalid num_vls %u for MTU %d , using 4 VLs\n",
6523 					    qib_num_cfg_vls, mtu);
6524 				ppd->vls_supported = IB_VL_VL0_3;
6525 				qib_num_cfg_vls = 4;
6526 			}
6527 			break;
6528 		}
6529 		ppd->vls_operational = ppd->vls_supported;
6530 
6531 		init_waitqueue_head(&cp->autoneg_wait);
6532 		INIT_DELAYED_WORK(&cp->autoneg_work,
6533 				  autoneg_7322_work);
6534 		if (ppd->dd->cspec->r1)
6535 			INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work);
6536 
6537 		/*
6538 		 * For Mez and similar cards, no qsfp info, so do
6539 		 * the "cable info" setup here.  Can be overridden
6540 		 * in adapter-specific routines.
6541 		 */
6542 		if (!(dd->flags & QIB_HAS_QSFP)) {
6543 			if (!IS_QMH(dd) && !IS_QME(dd))
6544 				qib_devinfo(dd->pcidev,
6545 					"IB%u:%u: Unknown mezzanine card type\n",
6546 					dd->unit, ppd->port);
6547 			cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME;
6548 			/*
6549 			 * Choose center value as default tx serdes setting
6550 			 * until changed through module parameter.
6551 			 */
6552 			ppd->cpspec->no_eep = IS_QMH(dd) ?
6553 				TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4;
6554 		} else
6555 			cp->h1_val = H1_FORCE_VAL;
6556 
6557 		/* Avoid writes to chip for mini_init */
6558 		if (!qib_mini_init)
6559 			write_7322_init_portregs(ppd);
6560 
6561 		timer_setup(&cp->chase_timer, reenable_chase, 0);
6562 
6563 		ppd++;
6564 	}
6565 
6566 	dd->rcvhdrentsize = qib_rcvhdrentsize ?
6567 		qib_rcvhdrentsize : QIB_RCVHDR_ENTSIZE;
6568 	dd->rcvhdrsize = qib_rcvhdrsize ?
6569 		qib_rcvhdrsize : QIB_DFLT_RCVHDRSIZE;
6570 	dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32);
6571 
6572 	/* we always allocate at least 2048 bytes for eager buffers */
6573 	dd->rcvegrbufsize = max(mtu, 2048);
6574 	dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize);
6575 
6576 	qib_7322_tidtemplate(dd);
6577 
6578 	/*
6579 	 * We can request a receive interrupt for 1 or
6580 	 * more packets from current offset.
6581 	 */
6582 	dd->rhdrhead_intr_off =
6583 		(u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT;
6584 
6585 	/* setup the stats timer; the add_timer is done at end of init */
6586 	timer_setup(&dd->stats_timer, qib_get_7322_faststats, 0);
6587 
6588 	dd->ureg_align = 0x10000;  /* 64KB alignment */
6589 
6590 	dd->piosize2kmax_dwords = dd->piosize2k >> 2;
6591 
6592 	qib_7322_config_ctxts(dd);
6593 	qib_set_ctxtcnt(dd);
6594 
6595 	/*
6596 	 * We do not set WC on the VL15 buffers to avoid
6597 	 * a rare problem with unaligned writes from
6598 	 * interrupt-flushed store buffers, so we need
6599 	 * to map those separately here.  We can't solve
6600 	 * this for the rarely used mtrr case.
6601 	 */
6602 	ret = init_chip_wc_pat(dd, 0);
6603 	if (ret)
6604 		goto bail;
6605 
6606 	/* vl15 buffers start just after the 4k buffers */
6607 	vl15off = dd->physaddr + (dd->piobufbase >> 32) +
6608 		  dd->piobcnt4k * dd->align4k;
6609 	dd->piovl15base	= ioremap(vl15off,
6610 					  NUM_VL15_BUFS * dd->align4k);
6611 	if (!dd->piovl15base) {
6612 		ret = -ENOMEM;
6613 		goto bail;
6614 	}
6615 
6616 	qib_7322_set_baseaddrs(dd); /* set chip access pointers now */
6617 
6618 	ret = 0;
6619 	if (qib_mini_init)
6620 		goto bail;
6621 	if (!dd->num_pports) {
6622 		qib_dev_err(dd, "No ports enabled, giving up initialization\n");
6623 		goto bail; /* no error, so can still figure out why err */
6624 	}
6625 
6626 	write_7322_initregs(dd);
6627 	ret = qib_create_ctxts(dd);
6628 	init_7322_cntrnames(dd);
6629 
6630 	updthresh = 8U; /* update threshold */
6631 
6632 	/* use all of 4KB buffers for the kernel SDMA, zero if !SDMA.
6633 	 * reserve the update threshold amount for other kernel use, such
6634 	 * as sending SMI, MAD, and ACKs, or 3, whichever is greater,
6635 	 * unless we aren't enabling SDMA, in which case we want to use
6636 	 * all the 4k bufs for the kernel.
6637 	 * if this was less than the update threshold, we could wait
6638 	 * a long time for an update.  Coded this way because we
6639 	 * sometimes change the update threshold for various reasons,
6640 	 * and we want this to remain robust.
6641 	 */
6642 	if (dd->flags & QIB_HAS_SEND_DMA) {
6643 		dd->cspec->sdmabufcnt = dd->piobcnt4k;
6644 		sbufs = updthresh > 3 ? updthresh : 3;
6645 	} else {
6646 		dd->cspec->sdmabufcnt = 0;
6647 		sbufs = dd->piobcnt4k;
6648 	}
6649 	dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k -
6650 		dd->cspec->sdmabufcnt;
6651 	dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs;
6652 	dd->cspec->lastbuf_for_pio--; /* range is <= , not < */
6653 	dd->last_pio = dd->cspec->lastbuf_for_pio;
6654 	dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ?
6655 		dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0;
6656 
6657 	/*
6658 	 * If we have 16 user contexts, we will have 7 sbufs
6659 	 * per context, so reduce the update threshold to match.  We
6660 	 * want to update before we actually run out, at low pbufs/ctxt
6661 	 * so give ourselves some margin.
6662 	 */
6663 	if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh)
6664 		updthresh = dd->pbufsctxt - 2;
6665 	dd->cspec->updthresh_dflt = updthresh;
6666 	dd->cspec->updthresh = updthresh;
6667 
6668 	/* before full enable, no interrupts, no locking needed */
6669 	dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld))
6670 			     << SYM_LSB(SendCtrl, AvailUpdThld)) |
6671 			SYM_MASK(SendCtrl, SendBufAvailPad64Byte);
6672 
6673 	dd->psxmitwait_supported = 1;
6674 	dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE;
6675 bail:
6676 	if (!dd->ctxtcnt)
6677 		dd->ctxtcnt = 1; /* for other initialization code */
6678 
6679 	return ret;
6680 }
6681 
6682 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc,
6683 					u32 *pbufnum)
6684 {
6685 	u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK;
6686 	struct qib_devdata *dd = ppd->dd;
6687 
6688 	/* last is same for 2k and 4k, because we use 4k if all 2k busy */
6689 	if (pbc & PBC_7322_VL15_SEND) {
6690 		first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx;
6691 		last = first;
6692 	} else {
6693 		if ((plen + 1) > dd->piosize2kmax_dwords)
6694 			first = dd->piobcnt2k;
6695 		else
6696 			first = 0;
6697 		last = dd->cspec->lastbuf_for_pio;
6698 	}
6699 	return qib_getsendbuf_range(dd, pbufnum, first, last);
6700 }
6701 
6702 static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv,
6703 				     u32 start)
6704 {
6705 	qib_write_kreg_port(ppd, krp_psinterval, intv);
6706 	qib_write_kreg_port(ppd, krp_psstart, start);
6707 }
6708 
6709 /*
6710  * Must be called with sdma_lock held, or before init finished.
6711  */
6712 static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt)
6713 {
6714 	qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt);
6715 }
6716 
6717 /*
6718  * sdma_lock should be acquired before calling this routine
6719  */
6720 static void dump_sdma_7322_state(struct qib_pportdata *ppd)
6721 {
6722 	u64 reg, reg1, reg2;
6723 
6724 	reg = qib_read_kreg_port(ppd, krp_senddmastatus);
6725 	qib_dev_porterr(ppd->dd, ppd->port,
6726 		"SDMA senddmastatus: 0x%016llx\n", reg);
6727 
6728 	reg = qib_read_kreg_port(ppd, krp_sendctrl);
6729 	qib_dev_porterr(ppd->dd, ppd->port,
6730 		"SDMA sendctrl: 0x%016llx\n", reg);
6731 
6732 	reg = qib_read_kreg_port(ppd, krp_senddmabase);
6733 	qib_dev_porterr(ppd->dd, ppd->port,
6734 		"SDMA senddmabase: 0x%016llx\n", reg);
6735 
6736 	reg = qib_read_kreg_port(ppd, krp_senddmabufmask0);
6737 	reg1 = qib_read_kreg_port(ppd, krp_senddmabufmask1);
6738 	reg2 = qib_read_kreg_port(ppd, krp_senddmabufmask2);
6739 	qib_dev_porterr(ppd->dd, ppd->port,
6740 		"SDMA senddmabufmask 0:%llx  1:%llx  2:%llx\n",
6741 		 reg, reg1, reg2);
6742 
6743 	/* get bufuse bits, clear them, and print them again if non-zero */
6744 	reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0);
6745 	qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg);
6746 	reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1);
6747 	qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg1);
6748 	reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2);
6749 	qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg2);
6750 	/* 0 and 1 should always be zero, so print as short form */
6751 	qib_dev_porterr(ppd->dd, ppd->port,
6752 		 "SDMA current senddmabuf_use 0:%llx  1:%llx  2:%llx\n",
6753 		 reg, reg1, reg2);
6754 	reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0);
6755 	reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1);
6756 	reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2);
6757 	/* 0 and 1 should always be zero, so print as short form */
6758 	qib_dev_porterr(ppd->dd, ppd->port,
6759 		 "SDMA cleared senddmabuf_use 0:%llx  1:%llx  2:%llx\n",
6760 		 reg, reg1, reg2);
6761 
6762 	reg = qib_read_kreg_port(ppd, krp_senddmatail);
6763 	qib_dev_porterr(ppd->dd, ppd->port,
6764 		"SDMA senddmatail: 0x%016llx\n", reg);
6765 
6766 	reg = qib_read_kreg_port(ppd, krp_senddmahead);
6767 	qib_dev_porterr(ppd->dd, ppd->port,
6768 		"SDMA senddmahead: 0x%016llx\n", reg);
6769 
6770 	reg = qib_read_kreg_port(ppd, krp_senddmaheadaddr);
6771 	qib_dev_porterr(ppd->dd, ppd->port,
6772 		"SDMA senddmaheadaddr: 0x%016llx\n", reg);
6773 
6774 	reg = qib_read_kreg_port(ppd, krp_senddmalengen);
6775 	qib_dev_porterr(ppd->dd, ppd->port,
6776 		"SDMA senddmalengen: 0x%016llx\n", reg);
6777 
6778 	reg = qib_read_kreg_port(ppd, krp_senddmadesccnt);
6779 	qib_dev_porterr(ppd->dd, ppd->port,
6780 		"SDMA senddmadesccnt: 0x%016llx\n", reg);
6781 
6782 	reg = qib_read_kreg_port(ppd, krp_senddmaidlecnt);
6783 	qib_dev_porterr(ppd->dd, ppd->port,
6784 		"SDMA senddmaidlecnt: 0x%016llx\n", reg);
6785 
6786 	reg = qib_read_kreg_port(ppd, krp_senddmaprioritythld);
6787 	qib_dev_porterr(ppd->dd, ppd->port,
6788 		"SDMA senddmapriorityhld: 0x%016llx\n", reg);
6789 
6790 	reg = qib_read_kreg_port(ppd, krp_senddmareloadcnt);
6791 	qib_dev_porterr(ppd->dd, ppd->port,
6792 		"SDMA senddmareloadcnt: 0x%016llx\n", reg);
6793 
6794 	dump_sdma_state(ppd);
6795 }
6796 
6797 static struct sdma_set_state_action sdma_7322_action_table[] = {
6798 	[qib_sdma_state_s00_hw_down] = {
6799 		.go_s99_running_tofalse = 1,
6800 		.op_enable = 0,
6801 		.op_intenable = 0,
6802 		.op_halt = 0,
6803 		.op_drain = 0,
6804 	},
6805 	[qib_sdma_state_s10_hw_start_up_wait] = {
6806 		.op_enable = 0,
6807 		.op_intenable = 1,
6808 		.op_halt = 1,
6809 		.op_drain = 0,
6810 	},
6811 	[qib_sdma_state_s20_idle] = {
6812 		.op_enable = 1,
6813 		.op_intenable = 1,
6814 		.op_halt = 1,
6815 		.op_drain = 0,
6816 	},
6817 	[qib_sdma_state_s30_sw_clean_up_wait] = {
6818 		.op_enable = 0,
6819 		.op_intenable = 1,
6820 		.op_halt = 1,
6821 		.op_drain = 0,
6822 	},
6823 	[qib_sdma_state_s40_hw_clean_up_wait] = {
6824 		.op_enable = 1,
6825 		.op_intenable = 1,
6826 		.op_halt = 1,
6827 		.op_drain = 0,
6828 	},
6829 	[qib_sdma_state_s50_hw_halt_wait] = {
6830 		.op_enable = 1,
6831 		.op_intenable = 1,
6832 		.op_halt = 1,
6833 		.op_drain = 1,
6834 	},
6835 	[qib_sdma_state_s99_running] = {
6836 		.op_enable = 1,
6837 		.op_intenable = 1,
6838 		.op_halt = 0,
6839 		.op_drain = 0,
6840 		.go_s99_running_totrue = 1,
6841 	},
6842 };
6843 
6844 static void qib_7322_sdma_init_early(struct qib_pportdata *ppd)
6845 {
6846 	ppd->sdma_state.set_state_action = sdma_7322_action_table;
6847 }
6848 
6849 static int init_sdma_7322_regs(struct qib_pportdata *ppd)
6850 {
6851 	struct qib_devdata *dd = ppd->dd;
6852 	unsigned lastbuf, erstbuf;
6853 	u64 senddmabufmask[3] = { 0 };
6854 	int n;
6855 
6856 	qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys);
6857 	qib_sdma_7322_setlengen(ppd);
6858 	qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */
6859 	qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt);
6860 	qib_write_kreg_port(ppd, krp_senddmadesccnt, 0);
6861 	qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys);
6862 
6863 	if (dd->num_pports)
6864 		n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */
6865 	else
6866 		n = dd->cspec->sdmabufcnt; /* failsafe for init */
6867 	erstbuf = (dd->piobcnt2k + dd->piobcnt4k) -
6868 		((dd->num_pports == 1 || ppd->port == 2) ? n :
6869 		dd->cspec->sdmabufcnt);
6870 	lastbuf = erstbuf + n;
6871 
6872 	ppd->sdma_state.first_sendbuf = erstbuf;
6873 	ppd->sdma_state.last_sendbuf = lastbuf;
6874 	for (; erstbuf < lastbuf; ++erstbuf) {
6875 		unsigned word = erstbuf / BITS_PER_LONG;
6876 		unsigned bit = erstbuf & (BITS_PER_LONG - 1);
6877 
6878 		senddmabufmask[word] |= 1ULL << bit;
6879 	}
6880 	qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]);
6881 	qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]);
6882 	qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]);
6883 	return 0;
6884 }
6885 
6886 /* sdma_lock must be held */
6887 static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd)
6888 {
6889 	struct qib_devdata *dd = ppd->dd;
6890 	int sane;
6891 	int use_dmahead;
6892 	u16 swhead;
6893 	u16 swtail;
6894 	u16 cnt;
6895 	u16 hwhead;
6896 
6897 	use_dmahead = __qib_sdma_running(ppd) &&
6898 		(dd->flags & QIB_HAS_SDMA_TIMEOUT);
6899 retry:
6900 	hwhead = use_dmahead ?
6901 		(u16) le64_to_cpu(*ppd->sdma_head_dma) :
6902 		(u16) qib_read_kreg_port(ppd, krp_senddmahead);
6903 
6904 	swhead = ppd->sdma_descq_head;
6905 	swtail = ppd->sdma_descq_tail;
6906 	cnt = ppd->sdma_descq_cnt;
6907 
6908 	if (swhead < swtail)
6909 		/* not wrapped */
6910 		sane = (hwhead >= swhead) & (hwhead <= swtail);
6911 	else if (swhead > swtail)
6912 		/* wrapped around */
6913 		sane = ((hwhead >= swhead) && (hwhead < cnt)) ||
6914 			(hwhead <= swtail);
6915 	else
6916 		/* empty */
6917 		sane = (hwhead == swhead);
6918 
6919 	if (unlikely(!sane)) {
6920 		if (use_dmahead) {
6921 			/* try one more time, directly from the register */
6922 			use_dmahead = 0;
6923 			goto retry;
6924 		}
6925 		/* proceed as if no progress */
6926 		hwhead = swhead;
6927 	}
6928 
6929 	return hwhead;
6930 }
6931 
6932 static int qib_sdma_7322_busy(struct qib_pportdata *ppd)
6933 {
6934 	u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus);
6935 
6936 	return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) ||
6937 	       (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) ||
6938 	       !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) ||
6939 	       !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty));
6940 }
6941 
6942 /*
6943  * Compute the amount of delay before sending the next packet if the
6944  * port's send rate differs from the static rate set for the QP.
6945  * The delay affects the next packet and the amount of the delay is
6946  * based on the length of the this packet.
6947  */
6948 static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen,
6949 				   u8 srate, u8 vl)
6950 {
6951 	u8 snd_mult = ppd->delay_mult;
6952 	u8 rcv_mult = ib_rate_to_delay[srate];
6953 	u32 ret;
6954 
6955 	ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0;
6956 
6957 	/* Indicate VL15, else set the VL in the control word */
6958 	if (vl == 15)
6959 		ret |= PBC_7322_VL15_SEND_CTRL;
6960 	else
6961 		ret |= vl << PBC_VL_NUM_LSB;
6962 	ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB;
6963 
6964 	return ret;
6965 }
6966 
6967 /*
6968  * Enable the per-port VL15 send buffers for use.
6969  * They follow the rest of the buffers, without a config parameter.
6970  * This was in initregs, but that is done before the shadow
6971  * is set up, and this has to be done after the shadow is
6972  * set up.
6973  */
6974 static void qib_7322_initvl15_bufs(struct qib_devdata *dd)
6975 {
6976 	unsigned vl15bufs;
6977 
6978 	vl15bufs = dd->piobcnt2k + dd->piobcnt4k;
6979 	qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS,
6980 			       TXCHK_CHG_TYPE_KERN, NULL);
6981 }
6982 
6983 static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd)
6984 {
6985 	if (rcd->ctxt < NUM_IB_PORTS) {
6986 		if (rcd->dd->num_pports > 1) {
6987 			rcd->rcvegrcnt = KCTXT0_EGRCNT / 2;
6988 			rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0;
6989 		} else {
6990 			rcd->rcvegrcnt = KCTXT0_EGRCNT;
6991 			rcd->rcvegr_tid_base = 0;
6992 		}
6993 	} else {
6994 		rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt;
6995 		rcd->rcvegr_tid_base = KCTXT0_EGRCNT +
6996 			(rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt;
6997 	}
6998 }
6999 
7000 #define QTXSLEEPS 5000
7001 static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start,
7002 				  u32 len, u32 which, struct qib_ctxtdata *rcd)
7003 {
7004 	int i;
7005 	const int last = start + len - 1;
7006 	const int lastr = last / BITS_PER_LONG;
7007 	u32 sleeps = 0;
7008 	int wait = rcd != NULL;
7009 	unsigned long flags;
7010 
7011 	while (wait) {
7012 		unsigned long shadow = 0;
7013 		int cstart, previ = -1;
7014 
7015 		/*
7016 		 * when flipping from kernel to user, we can't change
7017 		 * the checking type if the buffer is allocated to the
7018 		 * driver.   It's OK the other direction, because it's
7019 		 * from close, and we have just disarm'ed all the
7020 		 * buffers.  All the kernel to kernel changes are also
7021 		 * OK.
7022 		 */
7023 		for (cstart = start; cstart <= last; cstart++) {
7024 			i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT)
7025 				/ BITS_PER_LONG;
7026 			if (i != previ) {
7027 				shadow = (unsigned long)
7028 					le64_to_cpu(dd->pioavailregs_dma[i]);
7029 				previ = i;
7030 			}
7031 			if (test_bit(((2 * cstart) +
7032 				      QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT)
7033 				     % BITS_PER_LONG, &shadow))
7034 				break;
7035 		}
7036 
7037 		if (cstart > last)
7038 			break;
7039 
7040 		if (sleeps == QTXSLEEPS)
7041 			break;
7042 		/* make sure we see an updated copy next time around */
7043 		sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
7044 		sleeps++;
7045 		msleep(20);
7046 	}
7047 
7048 	switch (which) {
7049 	case TXCHK_CHG_TYPE_DIS1:
7050 		/*
7051 		 * disable checking on a range; used by diags; just
7052 		 * one buffer, but still written generically
7053 		 */
7054 		for (i = start; i <= last; i++)
7055 			clear_bit(i, dd->cspec->sendchkenable);
7056 		break;
7057 
7058 	case TXCHK_CHG_TYPE_ENAB1:
7059 		/*
7060 		 * (re)enable checking on a range; used by diags; just
7061 		 * one buffer, but still written generically; read
7062 		 * scratch to be sure buffer actually triggered, not
7063 		 * just flushed from processor.
7064 		 */
7065 		qib_read_kreg32(dd, kr_scratch);
7066 		for (i = start; i <= last; i++)
7067 			set_bit(i, dd->cspec->sendchkenable);
7068 		break;
7069 
7070 	case TXCHK_CHG_TYPE_KERN:
7071 		/* usable by kernel */
7072 		for (i = start; i <= last; i++) {
7073 			set_bit(i, dd->cspec->sendibchk);
7074 			clear_bit(i, dd->cspec->sendgrhchk);
7075 		}
7076 		spin_lock_irqsave(&dd->uctxt_lock, flags);
7077 		/* see if we need to raise avail update threshold */
7078 		for (i = dd->first_user_ctxt;
7079 		     dd->cspec->updthresh != dd->cspec->updthresh_dflt
7080 		     && i < dd->cfgctxts; i++)
7081 			if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt &&
7082 			   ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1)
7083 			   < dd->cspec->updthresh_dflt)
7084 				break;
7085 		spin_unlock_irqrestore(&dd->uctxt_lock, flags);
7086 		if (i == dd->cfgctxts) {
7087 			spin_lock_irqsave(&dd->sendctrl_lock, flags);
7088 			dd->cspec->updthresh = dd->cspec->updthresh_dflt;
7089 			dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
7090 			dd->sendctrl |= (dd->cspec->updthresh &
7091 					 SYM_RMASK(SendCtrl, AvailUpdThld)) <<
7092 					   SYM_LSB(SendCtrl, AvailUpdThld);
7093 			spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
7094 			sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
7095 		}
7096 		break;
7097 
7098 	case TXCHK_CHG_TYPE_USER:
7099 		/* for user process */
7100 		for (i = start; i <= last; i++) {
7101 			clear_bit(i, dd->cspec->sendibchk);
7102 			set_bit(i, dd->cspec->sendgrhchk);
7103 		}
7104 		spin_lock_irqsave(&dd->sendctrl_lock, flags);
7105 		if (rcd && rcd->subctxt_cnt && ((rcd->piocnt
7106 			/ rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) {
7107 			dd->cspec->updthresh = (rcd->piocnt /
7108 						rcd->subctxt_cnt) - 1;
7109 			dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
7110 			dd->sendctrl |= (dd->cspec->updthresh &
7111 					SYM_RMASK(SendCtrl, AvailUpdThld))
7112 					<< SYM_LSB(SendCtrl, AvailUpdThld);
7113 			spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
7114 			sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
7115 		} else
7116 			spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
7117 		break;
7118 
7119 	default:
7120 		break;
7121 	}
7122 
7123 	for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i)
7124 		qib_write_kreg(dd, kr_sendcheckmask + i,
7125 			       dd->cspec->sendchkenable[i]);
7126 
7127 	for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) {
7128 		qib_write_kreg(dd, kr_sendgrhcheckmask + i,
7129 			       dd->cspec->sendgrhchk[i]);
7130 		qib_write_kreg(dd, kr_sendibpktmask + i,
7131 			       dd->cspec->sendibchk[i]);
7132 	}
7133 
7134 	/*
7135 	 * Be sure whatever we did was seen by the chip and acted upon,
7136 	 * before we return.  Mostly important for which >= 2.
7137 	 */
7138 	qib_read_kreg32(dd, kr_scratch);
7139 }
7140 
7141 
7142 /* useful for trigger analyzers, etc. */
7143 static void writescratch(struct qib_devdata *dd, u32 val)
7144 {
7145 	qib_write_kreg(dd, kr_scratch, val);
7146 }
7147 
7148 /* Dummy for now, use chip regs soon */
7149 static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum)
7150 {
7151 	return -ENXIO;
7152 }
7153 
7154 /**
7155  * qib_init_iba7322_funcs - set up the chip-specific function pointers
7156  * @pdev: the pci_dev for qlogic_ib device
7157  * @ent: pci_device_id struct for this dev
7158  *
7159  * Also allocates, inits, and returns the devdata struct for this
7160  * device instance
7161  *
7162  * This is global, and is called directly at init to set up the
7163  * chip-specific function pointers for later use.
7164  */
7165 struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev,
7166 					   const struct pci_device_id *ent)
7167 {
7168 	struct qib_devdata *dd;
7169 	int ret, i;
7170 	u32 tabsize, actual_cnt = 0;
7171 
7172 	dd = qib_alloc_devdata(pdev,
7173 		NUM_IB_PORTS * sizeof(struct qib_pportdata) +
7174 		sizeof(struct qib_chip_specific) +
7175 		NUM_IB_PORTS * sizeof(struct qib_chippport_specific));
7176 	if (IS_ERR(dd))
7177 		goto bail;
7178 
7179 	dd->f_bringup_serdes    = qib_7322_bringup_serdes;
7180 	dd->f_cleanup           = qib_setup_7322_cleanup;
7181 	dd->f_clear_tids        = qib_7322_clear_tids;
7182 	dd->f_free_irq          = qib_7322_free_irq;
7183 	dd->f_get_base_info     = qib_7322_get_base_info;
7184 	dd->f_get_msgheader     = qib_7322_get_msgheader;
7185 	dd->f_getsendbuf        = qib_7322_getsendbuf;
7186 	dd->f_gpio_mod          = gpio_7322_mod;
7187 	dd->f_eeprom_wen        = qib_7322_eeprom_wen;
7188 	dd->f_hdrqempty         = qib_7322_hdrqempty;
7189 	dd->f_ib_updown         = qib_7322_ib_updown;
7190 	dd->f_init_ctxt         = qib_7322_init_ctxt;
7191 	dd->f_initvl15_bufs     = qib_7322_initvl15_bufs;
7192 	dd->f_intr_fallback     = qib_7322_intr_fallback;
7193 	dd->f_late_initreg      = qib_late_7322_initreg;
7194 	dd->f_setpbc_control    = qib_7322_setpbc_control;
7195 	dd->f_portcntr          = qib_portcntr_7322;
7196 	dd->f_put_tid           = qib_7322_put_tid;
7197 	dd->f_quiet_serdes      = qib_7322_mini_quiet_serdes;
7198 	dd->f_rcvctrl           = rcvctrl_7322_mod;
7199 	dd->f_read_cntrs        = qib_read_7322cntrs;
7200 	dd->f_read_portcntrs    = qib_read_7322portcntrs;
7201 	dd->f_reset             = qib_do_7322_reset;
7202 	dd->f_init_sdma_regs    = init_sdma_7322_regs;
7203 	dd->f_sdma_busy         = qib_sdma_7322_busy;
7204 	dd->f_sdma_gethead      = qib_sdma_7322_gethead;
7205 	dd->f_sdma_sendctrl     = qib_7322_sdma_sendctrl;
7206 	dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt;
7207 	dd->f_sdma_update_tail  = qib_sdma_update_7322_tail;
7208 	dd->f_sendctrl          = sendctrl_7322_mod;
7209 	dd->f_set_armlaunch     = qib_set_7322_armlaunch;
7210 	dd->f_set_cntr_sample   = qib_set_cntr_7322_sample;
7211 	dd->f_iblink_state      = qib_7322_iblink_state;
7212 	dd->f_ibphys_portstate  = qib_7322_phys_portstate;
7213 	dd->f_get_ib_cfg        = qib_7322_get_ib_cfg;
7214 	dd->f_set_ib_cfg        = qib_7322_set_ib_cfg;
7215 	dd->f_set_ib_loopback   = qib_7322_set_loopback;
7216 	dd->f_get_ib_table      = qib_7322_get_ib_table;
7217 	dd->f_set_ib_table      = qib_7322_set_ib_table;
7218 	dd->f_set_intr_state    = qib_7322_set_intr_state;
7219 	dd->f_setextled         = qib_setup_7322_setextled;
7220 	dd->f_txchk_change      = qib_7322_txchk_change;
7221 	dd->f_update_usrhead    = qib_update_7322_usrhead;
7222 	dd->f_wantpiobuf_intr   = qib_wantpiobuf_7322_intr;
7223 	dd->f_xgxs_reset        = qib_7322_mini_pcs_reset;
7224 	dd->f_sdma_hw_clean_up  = qib_7322_sdma_hw_clean_up;
7225 	dd->f_sdma_hw_start_up  = qib_7322_sdma_hw_start_up;
7226 	dd->f_sdma_init_early   = qib_7322_sdma_init_early;
7227 	dd->f_writescratch      = writescratch;
7228 	dd->f_tempsense_rd	= qib_7322_tempsense_rd;
7229 #ifdef CONFIG_INFINIBAND_QIB_DCA
7230 	dd->f_notify_dca	= qib_7322_notify_dca;
7231 #endif
7232 	/*
7233 	 * Do remaining PCIe setup and save PCIe values in dd.
7234 	 * Any error printing is already done by the init code.
7235 	 * On return, we have the chip mapped, but chip registers
7236 	 * are not set up until start of qib_init_7322_variables.
7237 	 */
7238 	ret = qib_pcie_ddinit(dd, pdev, ent);
7239 	if (ret < 0)
7240 		goto bail_free;
7241 
7242 	/* initialize chip-specific variables */
7243 	ret = qib_init_7322_variables(dd);
7244 	if (ret)
7245 		goto bail_cleanup;
7246 
7247 	if (qib_mini_init || !dd->num_pports)
7248 		goto bail;
7249 
7250 	/*
7251 	 * Determine number of vectors we want; depends on port count
7252 	 * and number of configured kernel receive queues actually used.
7253 	 * Should also depend on whether sdma is enabled or not, but
7254 	 * that's such a rare testing case it's not worth worrying about.
7255 	 */
7256 	tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table);
7257 	for (i = 0; i < tabsize; i++)
7258 		if ((i < ARRAY_SIZE(irq_table) &&
7259 		     irq_table[i].port <= dd->num_pports) ||
7260 		    (i >= ARRAY_SIZE(irq_table) &&
7261 		     dd->rcd[i - ARRAY_SIZE(irq_table)]))
7262 			actual_cnt++;
7263 	/* reduce by ctxt's < 2 */
7264 	if (qib_krcvq01_no_msi)
7265 		actual_cnt -= dd->num_pports;
7266 
7267 	tabsize = actual_cnt;
7268 	dd->cspec->msix_entries = kcalloc(tabsize,
7269 					  sizeof(struct qib_msix_entry),
7270 					  GFP_KERNEL);
7271 	if (!dd->cspec->msix_entries)
7272 		tabsize = 0;
7273 
7274 	if (qib_pcie_params(dd, 8, &tabsize))
7275 		qib_dev_err(dd,
7276 			"Failed to setup PCIe or interrupts; continuing anyway\n");
7277 	/* may be less than we wanted, if not enough available */
7278 	dd->cspec->num_msix_entries = tabsize;
7279 
7280 	/* setup interrupt handler */
7281 	qib_setup_7322_interrupt(dd, 1);
7282 
7283 	/* clear diagctrl register, in case diags were running and crashed */
7284 	qib_write_kreg(dd, kr_hwdiagctrl, 0);
7285 #ifdef CONFIG_INFINIBAND_QIB_DCA
7286 	if (!dca_add_requester(&pdev->dev)) {
7287 		qib_devinfo(dd->pcidev, "DCA enabled\n");
7288 		dd->flags |= QIB_DCA_ENABLED;
7289 		qib_setup_dca(dd);
7290 	}
7291 #endif
7292 	goto bail;
7293 
7294 bail_cleanup:
7295 	qib_pcie_ddcleanup(dd);
7296 bail_free:
7297 	qib_free_devdata(dd);
7298 	dd = ERR_PTR(ret);
7299 bail:
7300 	return dd;
7301 }
7302 
7303 /*
7304  * Set the table entry at the specified index from the table specifed.
7305  * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first
7306  * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR.
7307  * 'idx' below addresses the correct entry, while its 4 LSBs select the
7308  * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table.
7309  */
7310 #define DDS_ENT_AMP_LSB 14
7311 #define DDS_ENT_MAIN_LSB 9
7312 #define DDS_ENT_POST_LSB 5
7313 #define DDS_ENT_PRE_XTRA_LSB 3
7314 #define DDS_ENT_PRE_LSB 0
7315 
7316 /*
7317  * Set one entry in the TxDDS table for spec'd port
7318  * ridx picks one of the entries, while tp points
7319  * to the appropriate table entry.
7320  */
7321 static void set_txdds(struct qib_pportdata *ppd, int ridx,
7322 		      const struct txdds_ent *tp)
7323 {
7324 	struct qib_devdata *dd = ppd->dd;
7325 	u32 pack_ent;
7326 	int regidx;
7327 
7328 	/* Get correct offset in chip-space, and in source table */
7329 	regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx;
7330 	/*
7331 	 * We do not use qib_write_kreg_port() because it was intended
7332 	 * only for registers in the lower "port specific" pages.
7333 	 * So do index calculation  by hand.
7334 	 */
7335 	if (ppd->hw_pidx)
7336 		regidx += (dd->palign / sizeof(u64));
7337 
7338 	pack_ent = tp->amp << DDS_ENT_AMP_LSB;
7339 	pack_ent |= tp->main << DDS_ENT_MAIN_LSB;
7340 	pack_ent |= tp->pre << DDS_ENT_PRE_LSB;
7341 	pack_ent |= tp->post << DDS_ENT_POST_LSB;
7342 	qib_write_kreg(dd, regidx, pack_ent);
7343 	/* Prevent back-to-back writes by hitting scratch */
7344 	qib_write_kreg(ppd->dd, kr_scratch, 0);
7345 }
7346 
7347 static const struct vendor_txdds_ent vendor_txdds[] = {
7348 	{ /* Amphenol 1m 30awg NoEq */
7349 		{ 0x41, 0x50, 0x48 }, "584470002       ",
7350 		{ 10,  0,  0,  5 }, { 10,  0,  0,  9 }, {  7,  1,  0, 13 },
7351 	},
7352 	{ /* Amphenol 3m 28awg NoEq */
7353 		{ 0x41, 0x50, 0x48 }, "584470004       ",
7354 		{  0,  0,  0,  8 }, {  0,  0,  0, 11 }, {  0,  1,  7, 15 },
7355 	},
7356 	{ /* Finisar 3m OM2 Optical */
7357 		{ 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL",
7358 		{  0,  0,  0,  3 }, {  0,  0,  0,  4 }, {  0,  0,  0, 13 },
7359 	},
7360 	{ /* Finisar 30m OM2 Optical */
7361 		{ 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL",
7362 		{  0,  0,  0,  1 }, {  0,  0,  0,  5 }, {  0,  0,  0, 11 },
7363 	},
7364 	{ /* Finisar Default OM2 Optical */
7365 		{ 0x00, 0x90, 0x65 }, NULL,
7366 		{  0,  0,  0,  2 }, {  0,  0,  0,  5 }, {  0,  0,  0, 12 },
7367 	},
7368 	{ /* Gore 1m 30awg NoEq */
7369 		{ 0x00, 0x21, 0x77 }, "QSN3300-1       ",
7370 		{  0,  0,  0,  6 }, {  0,  0,  0,  9 }, {  0,  1,  0, 15 },
7371 	},
7372 	{ /* Gore 2m 30awg NoEq */
7373 		{ 0x00, 0x21, 0x77 }, "QSN3300-2       ",
7374 		{  0,  0,  0,  8 }, {  0,  0,  0, 10 }, {  0,  1,  7, 15 },
7375 	},
7376 	{ /* Gore 1m 28awg NoEq */
7377 		{ 0x00, 0x21, 0x77 }, "QSN3800-1       ",
7378 		{  0,  0,  0,  6 }, {  0,  0,  0,  8 }, {  0,  1,  0, 15 },
7379 	},
7380 	{ /* Gore 3m 28awg NoEq */
7381 		{ 0x00, 0x21, 0x77 }, "QSN3800-3       ",
7382 		{  0,  0,  0,  9 }, {  0,  0,  0, 13 }, {  0,  1,  7, 15 },
7383 	},
7384 	{ /* Gore 5m 24awg Eq */
7385 		{ 0x00, 0x21, 0x77 }, "QSN7000-5       ",
7386 		{  0,  0,  0,  7 }, {  0,  0,  0,  9 }, {  0,  1,  3, 15 },
7387 	},
7388 	{ /* Gore 7m 24awg Eq */
7389 		{ 0x00, 0x21, 0x77 }, "QSN7000-7       ",
7390 		{  0,  0,  0,  9 }, {  0,  0,  0, 11 }, {  0,  2,  6, 15 },
7391 	},
7392 	{ /* Gore 5m 26awg Eq */
7393 		{ 0x00, 0x21, 0x77 }, "QSN7600-5       ",
7394 		{  0,  0,  0,  8 }, {  0,  0,  0, 11 }, {  0,  1,  9, 13 },
7395 	},
7396 	{ /* Gore 7m 26awg Eq */
7397 		{ 0x00, 0x21, 0x77 }, "QSN7600-7       ",
7398 		{  0,  0,  0,  8 }, {  0,  0,  0, 11 }, {  10,  1,  8, 15 },
7399 	},
7400 	{ /* Intersil 12m 24awg Active */
7401 		{ 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224",
7402 		{  0,  0,  0,  2 }, {  0,  0,  0,  5 }, {  0,  3,  0,  9 },
7403 	},
7404 	{ /* Intersil 10m 28awg Active */
7405 		{ 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028",
7406 		{  0,  0,  0,  6 }, {  0,  0,  0,  4 }, {  0,  2,  0,  2 },
7407 	},
7408 	{ /* Intersil 7m 30awg Active */
7409 		{ 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730",
7410 		{  0,  0,  0,  6 }, {  0,  0,  0,  4 }, {  0,  1,  0,  3 },
7411 	},
7412 	{ /* Intersil 5m 32awg Active */
7413 		{ 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532",
7414 		{  0,  0,  0,  6 }, {  0,  0,  0,  6 }, {  0,  2,  0,  8 },
7415 	},
7416 	{ /* Intersil Default Active */
7417 		{ 0x00, 0x30, 0xB4 }, NULL,
7418 		{  0,  0,  0,  6 }, {  0,  0,  0,  5 }, {  0,  2,  0,  5 },
7419 	},
7420 	{ /* Luxtera 20m Active Optical */
7421 		{ 0x00, 0x25, 0x63 }, NULL,
7422 		{  0,  0,  0,  5 }, {  0,  0,  0,  8 }, {  0,  2,  0,  12 },
7423 	},
7424 	{ /* Molex 1M Cu loopback */
7425 		{ 0x00, 0x09, 0x3A }, "74763-0025      ",
7426 		{  2,  2,  6, 15 }, {  2,  2,  6, 15 }, {  2,  2,  6, 15 },
7427 	},
7428 	{ /* Molex 2m 28awg NoEq */
7429 		{ 0x00, 0x09, 0x3A }, "74757-2201      ",
7430 		{  0,  0,  0,  6 }, {  0,  0,  0,  9 }, {  0,  1,  1, 15 },
7431 	},
7432 };
7433 
7434 static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = {
7435 	/* amp, pre, main, post */
7436 	{  2, 2, 15,  6 },	/* Loopback */
7437 	{  0, 0,  0,  1 },	/*  2 dB */
7438 	{  0, 0,  0,  2 },	/*  3 dB */
7439 	{  0, 0,  0,  3 },	/*  4 dB */
7440 	{  0, 0,  0,  4 },	/*  5 dB */
7441 	{  0, 0,  0,  5 },	/*  6 dB */
7442 	{  0, 0,  0,  6 },	/*  7 dB */
7443 	{  0, 0,  0,  7 },	/*  8 dB */
7444 	{  0, 0,  0,  8 },	/*  9 dB */
7445 	{  0, 0,  0,  9 },	/* 10 dB */
7446 	{  0, 0,  0, 10 },	/* 11 dB */
7447 	{  0, 0,  0, 11 },	/* 12 dB */
7448 	{  0, 0,  0, 12 },	/* 13 dB */
7449 	{  0, 0,  0, 13 },	/* 14 dB */
7450 	{  0, 0,  0, 14 },	/* 15 dB */
7451 	{  0, 0,  0, 15 },	/* 16 dB */
7452 };
7453 
7454 static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = {
7455 	/* amp, pre, main, post */
7456 	{  2, 2, 15,  6 },	/* Loopback */
7457 	{  0, 0,  0,  8 },	/*  2 dB */
7458 	{  0, 0,  0,  8 },	/*  3 dB */
7459 	{  0, 0,  0,  9 },	/*  4 dB */
7460 	{  0, 0,  0,  9 },	/*  5 dB */
7461 	{  0, 0,  0, 10 },	/*  6 dB */
7462 	{  0, 0,  0, 10 },	/*  7 dB */
7463 	{  0, 0,  0, 11 },	/*  8 dB */
7464 	{  0, 0,  0, 11 },	/*  9 dB */
7465 	{  0, 0,  0, 12 },	/* 10 dB */
7466 	{  0, 0,  0, 12 },	/* 11 dB */
7467 	{  0, 0,  0, 13 },	/* 12 dB */
7468 	{  0, 0,  0, 13 },	/* 13 dB */
7469 	{  0, 0,  0, 14 },	/* 14 dB */
7470 	{  0, 0,  0, 14 },	/* 15 dB */
7471 	{  0, 0,  0, 15 },	/* 16 dB */
7472 };
7473 
7474 static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = {
7475 	/* amp, pre, main, post */
7476 	{  2, 2, 15,  6 },	/* Loopback */
7477 	{  0, 1,  0,  7 },	/*  2 dB (also QMH7342) */
7478 	{  0, 1,  0,  9 },	/*  3 dB (also QMH7342) */
7479 	{  0, 1,  0, 11 },	/*  4 dB */
7480 	{  0, 1,  0, 13 },	/*  5 dB */
7481 	{  0, 1,  0, 15 },	/*  6 dB */
7482 	{  0, 1,  3, 15 },	/*  7 dB */
7483 	{  0, 1,  7, 15 },	/*  8 dB */
7484 	{  0, 1,  7, 15 },	/*  9 dB */
7485 	{  0, 1,  8, 15 },	/* 10 dB */
7486 	{  0, 1,  9, 15 },	/* 11 dB */
7487 	{  0, 1, 10, 15 },	/* 12 dB */
7488 	{  0, 2,  6, 15 },	/* 13 dB */
7489 	{  0, 2,  7, 15 },	/* 14 dB */
7490 	{  0, 2,  8, 15 },	/* 15 dB */
7491 	{  0, 2,  9, 15 },	/* 16 dB */
7492 };
7493 
7494 /*
7495  * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ.
7496  * These are mostly used for mez cards going through connectors
7497  * and backplane traces, but can be used to add other "unusual"
7498  * table values as well.
7499  */
7500 static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = {
7501 	/* amp, pre, main, post */
7502 	{  0, 0, 0,  1 },	/* QMH7342 backplane settings */
7503 	{  0, 0, 0,  1 },	/* QMH7342 backplane settings */
7504 	{  0, 0, 0,  2 },	/* QMH7342 backplane settings */
7505 	{  0, 0, 0,  2 },	/* QMH7342 backplane settings */
7506 	{  0, 0, 0,  3 },	/* QMH7342 backplane settings */
7507 	{  0, 0, 0,  4 },	/* QMH7342 backplane settings */
7508 	{  0, 1, 4, 15 },	/* QME7342 backplane settings 1.0 */
7509 	{  0, 1, 3, 15 },	/* QME7342 backplane settings 1.0 */
7510 	{  0, 1, 0, 12 },	/* QME7342 backplane settings 1.0 */
7511 	{  0, 1, 0, 11 },	/* QME7342 backplane settings 1.0 */
7512 	{  0, 1, 0,  9 },	/* QME7342 backplane settings 1.0 */
7513 	{  0, 1, 0, 14 },	/* QME7342 backplane settings 1.0 */
7514 	{  0, 1, 2, 15 },	/* QME7342 backplane settings 1.0 */
7515 	{  0, 1, 0, 11 },       /* QME7342 backplane settings 1.1 */
7516 	{  0, 1, 0,  7 },       /* QME7342 backplane settings 1.1 */
7517 	{  0, 1, 0,  9 },       /* QME7342 backplane settings 1.1 */
7518 	{  0, 1, 0,  6 },       /* QME7342 backplane settings 1.1 */
7519 	{  0, 1, 0,  8 },       /* QME7342 backplane settings 1.1 */
7520 };
7521 
7522 static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = {
7523 	/* amp, pre, main, post */
7524 	{  0, 0, 0,  7 },	/* QMH7342 backplane settings */
7525 	{  0, 0, 0,  7 },	/* QMH7342 backplane settings */
7526 	{  0, 0, 0,  8 },	/* QMH7342 backplane settings */
7527 	{  0, 0, 0,  8 },	/* QMH7342 backplane settings */
7528 	{  0, 0, 0,  9 },	/* QMH7342 backplane settings */
7529 	{  0, 0, 0, 10 },	/* QMH7342 backplane settings */
7530 	{  0, 1, 4, 15 },	/* QME7342 backplane settings 1.0 */
7531 	{  0, 1, 3, 15 },	/* QME7342 backplane settings 1.0 */
7532 	{  0, 1, 0, 12 },	/* QME7342 backplane settings 1.0 */
7533 	{  0, 1, 0, 11 },	/* QME7342 backplane settings 1.0 */
7534 	{  0, 1, 0,  9 },	/* QME7342 backplane settings 1.0 */
7535 	{  0, 1, 0, 14 },	/* QME7342 backplane settings 1.0 */
7536 	{  0, 1, 2, 15 },	/* QME7342 backplane settings 1.0 */
7537 	{  0, 1, 0, 11 },       /* QME7342 backplane settings 1.1 */
7538 	{  0, 1, 0,  7 },       /* QME7342 backplane settings 1.1 */
7539 	{  0, 1, 0,  9 },       /* QME7342 backplane settings 1.1 */
7540 	{  0, 1, 0,  6 },       /* QME7342 backplane settings 1.1 */
7541 	{  0, 1, 0,  8 },       /* QME7342 backplane settings 1.1 */
7542 };
7543 
7544 static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = {
7545 	/* amp, pre, main, post */
7546 	{  0, 1,  0,  4 },	/* QMH7342 backplane settings */
7547 	{  0, 1,  0,  5 },	/* QMH7342 backplane settings */
7548 	{  0, 1,  0,  6 },	/* QMH7342 backplane settings */
7549 	{  0, 1,  0,  8 },	/* QMH7342 backplane settings */
7550 	{  0, 1,  0, 10 },	/* QMH7342 backplane settings */
7551 	{  0, 1,  0, 12 },	/* QMH7342 backplane settings */
7552 	{  0, 1,  4, 15 },	/* QME7342 backplane settings 1.0 */
7553 	{  0, 1,  3, 15 },	/* QME7342 backplane settings 1.0 */
7554 	{  0, 1,  0, 12 },	/* QME7342 backplane settings 1.0 */
7555 	{  0, 1,  0, 11 },	/* QME7342 backplane settings 1.0 */
7556 	{  0, 1,  0,  9 },	/* QME7342 backplane settings 1.0 */
7557 	{  0, 1,  0, 14 },	/* QME7342 backplane settings 1.0 */
7558 	{  0, 1,  2, 15 },	/* QME7342 backplane settings 1.0 */
7559 	{  0, 1,  0, 11 },      /* QME7342 backplane settings 1.1 */
7560 	{  0, 1,  0,  7 },      /* QME7342 backplane settings 1.1 */
7561 	{  0, 1,  0,  9 },      /* QME7342 backplane settings 1.1 */
7562 	{  0, 1,  0,  6 },      /* QME7342 backplane settings 1.1 */
7563 	{  0, 1,  0,  8 },      /* QME7342 backplane settings 1.1 */
7564 };
7565 
7566 static const struct txdds_ent txdds_extra_mfg[TXDDS_MFG_SZ] = {
7567 	/* amp, pre, main, post */
7568 	{ 0, 0, 0, 0 },         /* QME7342 mfg settings */
7569 	{ 0, 0, 0, 6 },         /* QME7342 P2 mfg settings */
7570 };
7571 
7572 static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds,
7573 					       unsigned atten)
7574 {
7575 	/*
7576 	 * The attenuation table starts at 2dB for entry 1,
7577 	 * with entry 0 being the loopback entry.
7578 	 */
7579 	if (atten <= 2)
7580 		atten = 1;
7581 	else if (atten > TXDDS_TABLE_SZ)
7582 		atten = TXDDS_TABLE_SZ - 1;
7583 	else
7584 		atten--;
7585 	return txdds + atten;
7586 }
7587 
7588 /*
7589  * if override is set, the module parameter txselect has a value
7590  * for this specific port, so use it, rather than our normal mechanism.
7591  */
7592 static void find_best_ent(struct qib_pportdata *ppd,
7593 			  const struct txdds_ent **sdr_dds,
7594 			  const struct txdds_ent **ddr_dds,
7595 			  const struct txdds_ent **qdr_dds, int override)
7596 {
7597 	struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache;
7598 	int idx;
7599 
7600 	/* Search table of known cables */
7601 	for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) {
7602 		const struct vendor_txdds_ent *v = vendor_txdds + idx;
7603 
7604 		if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) &&
7605 		    (!v->partnum ||
7606 		     !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) {
7607 			*sdr_dds = &v->sdr;
7608 			*ddr_dds = &v->ddr;
7609 			*qdr_dds = &v->qdr;
7610 			return;
7611 		}
7612 	}
7613 
7614 	/* Active cables don't have attenuation so we only set SERDES
7615 	 * settings to account for the attenuation of the board traces. */
7616 	if (!override && QSFP_IS_ACTIVE(qd->tech)) {
7617 		*sdr_dds = txdds_sdr + ppd->dd->board_atten;
7618 		*ddr_dds = txdds_ddr + ppd->dd->board_atten;
7619 		*qdr_dds = txdds_qdr + ppd->dd->board_atten;
7620 		return;
7621 	}
7622 
7623 	if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] ||
7624 						      qd->atten[1])) {
7625 		*sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]);
7626 		*ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]);
7627 		*qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]);
7628 		return;
7629 	} else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) {
7630 		/*
7631 		 * If we have no (or incomplete) data from the cable
7632 		 * EEPROM, or no QSFP, or override is set, use the
7633 		 * module parameter value to index into the attentuation
7634 		 * table.
7635 		 */
7636 		idx = ppd->cpspec->no_eep;
7637 		*sdr_dds = &txdds_sdr[idx];
7638 		*ddr_dds = &txdds_ddr[idx];
7639 		*qdr_dds = &txdds_qdr[idx];
7640 	} else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) {
7641 		/* similar to above, but index into the "extra" table. */
7642 		idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ;
7643 		*sdr_dds = &txdds_extra_sdr[idx];
7644 		*ddr_dds = &txdds_extra_ddr[idx];
7645 		*qdr_dds = &txdds_extra_qdr[idx];
7646 	} else if ((IS_QME(ppd->dd) || IS_QMH(ppd->dd)) &&
7647 		   ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ +
7648 					  TXDDS_MFG_SZ)) {
7649 		idx = ppd->cpspec->no_eep - (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ);
7650 		pr_info("IB%u:%u use idx %u into txdds_mfg\n",
7651 			ppd->dd->unit, ppd->port, idx);
7652 		*sdr_dds = &txdds_extra_mfg[idx];
7653 		*ddr_dds = &txdds_extra_mfg[idx];
7654 		*qdr_dds = &txdds_extra_mfg[idx];
7655 	} else {
7656 		/* this shouldn't happen, it's range checked */
7657 		*sdr_dds = txdds_sdr + qib_long_atten;
7658 		*ddr_dds = txdds_ddr + qib_long_atten;
7659 		*qdr_dds = txdds_qdr + qib_long_atten;
7660 	}
7661 }
7662 
7663 static void init_txdds_table(struct qib_pportdata *ppd, int override)
7664 {
7665 	const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds;
7666 	struct txdds_ent *dds;
7667 	int idx;
7668 	int single_ent = 0;
7669 
7670 	find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override);
7671 
7672 	/* for mez cards or override, use the selected value for all entries */
7673 	if (!(ppd->dd->flags & QIB_HAS_QSFP) || override)
7674 		single_ent = 1;
7675 
7676 	/* Fill in the first entry with the best entry found. */
7677 	set_txdds(ppd, 0, sdr_dds);
7678 	set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds);
7679 	set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds);
7680 	if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED |
7681 		QIBL_LINKACTIVE)) {
7682 		dds = (struct txdds_ent *)(ppd->link_speed_active ==
7683 					   QIB_IB_QDR ?  qdr_dds :
7684 					   (ppd->link_speed_active ==
7685 					    QIB_IB_DDR ? ddr_dds : sdr_dds));
7686 		write_tx_serdes_param(ppd, dds);
7687 	}
7688 
7689 	/* Fill in the remaining entries with the default table values. */
7690 	for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) {
7691 		set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx);
7692 		set_txdds(ppd, idx + TXDDS_TABLE_SZ,
7693 			  single_ent ? ddr_dds : txdds_ddr + idx);
7694 		set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ,
7695 			  single_ent ? qdr_dds : txdds_qdr + idx);
7696 	}
7697 }
7698 
7699 #define KR_AHB_ACC KREG_IDX(ahb_access_ctrl)
7700 #define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg)
7701 #define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy)
7702 #define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address)
7703 #define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data)
7704 #define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read)
7705 #define AHB_TRANS_TRIES 10
7706 
7707 /*
7708  * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4,
7709  * 5=subsystem which is why most calls have "chan + chan >> 1"
7710  * for the channel argument.
7711  */
7712 static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr,
7713 		    u32 data, u32 mask)
7714 {
7715 	u32 rd_data, wr_data, sz_mask;
7716 	u64 trans, acc, prev_acc;
7717 	u32 ret = 0xBAD0BAD;
7718 	int tries;
7719 
7720 	prev_acc = qib_read_kreg64(dd, KR_AHB_ACC);
7721 	/* From this point on, make sure we return access */
7722 	acc = (quad << 1) | 1;
7723 	qib_write_kreg(dd, KR_AHB_ACC, acc);
7724 
7725 	for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) {
7726 		trans = qib_read_kreg64(dd, KR_AHB_TRANS);
7727 		if (trans & AHB_TRANS_RDY)
7728 			break;
7729 	}
7730 	if (tries >= AHB_TRANS_TRIES) {
7731 		qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES);
7732 		goto bail;
7733 	}
7734 
7735 	/* If mask is not all 1s, we need to read, but different SerDes
7736 	 * entities have different sizes
7737 	 */
7738 	sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1;
7739 	wr_data = data & mask & sz_mask;
7740 	if ((~mask & sz_mask) != 0) {
7741 		trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1);
7742 		qib_write_kreg(dd, KR_AHB_TRANS, trans);
7743 
7744 		for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) {
7745 			trans = qib_read_kreg64(dd, KR_AHB_TRANS);
7746 			if (trans & AHB_TRANS_RDY)
7747 				break;
7748 		}
7749 		if (tries >= AHB_TRANS_TRIES) {
7750 			qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n",
7751 				    AHB_TRANS_TRIES);
7752 			goto bail;
7753 		}
7754 		/* Re-read in case host split reads and read data first */
7755 		trans = qib_read_kreg64(dd, KR_AHB_TRANS);
7756 		rd_data = (uint32_t)(trans >> AHB_DATA_LSB);
7757 		wr_data |= (rd_data & ~mask & sz_mask);
7758 	}
7759 
7760 	/* If mask is not zero, we need to write. */
7761 	if (mask & sz_mask) {
7762 		trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1);
7763 		trans |= ((uint64_t)wr_data << AHB_DATA_LSB);
7764 		trans |= AHB_WR;
7765 		qib_write_kreg(dd, KR_AHB_TRANS, trans);
7766 
7767 		for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) {
7768 			trans = qib_read_kreg64(dd, KR_AHB_TRANS);
7769 			if (trans & AHB_TRANS_RDY)
7770 				break;
7771 		}
7772 		if (tries >= AHB_TRANS_TRIES) {
7773 			qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n",
7774 				    AHB_TRANS_TRIES);
7775 			goto bail;
7776 		}
7777 	}
7778 	ret = wr_data;
7779 bail:
7780 	qib_write_kreg(dd, KR_AHB_ACC, prev_acc);
7781 	return ret;
7782 }
7783 
7784 static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data,
7785 			     unsigned mask)
7786 {
7787 	struct qib_devdata *dd = ppd->dd;
7788 	int chan;
7789 
7790 	for (chan = 0; chan < SERDES_CHANS; ++chan) {
7791 		ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr,
7792 			data, mask);
7793 		ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr,
7794 			0, 0);
7795 	}
7796 }
7797 
7798 static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable)
7799 {
7800 	u64 data = qib_read_kreg_port(ppd, krp_serdesctrl);
7801 	u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN);
7802 
7803 	if (enable && !state) {
7804 		pr_info("IB%u:%u Turning LOS on\n",
7805 			ppd->dd->unit, ppd->port);
7806 		data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
7807 	} else if (!enable && state) {
7808 		pr_info("IB%u:%u Turning LOS off\n",
7809 			ppd->dd->unit, ppd->port);
7810 		data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
7811 	}
7812 	qib_write_kreg_port(ppd, krp_serdesctrl, data);
7813 }
7814 
7815 static int serdes_7322_init(struct qib_pportdata *ppd)
7816 {
7817 	int ret = 0;
7818 
7819 	if (ppd->dd->cspec->r1)
7820 		ret = serdes_7322_init_old(ppd);
7821 	else
7822 		ret = serdes_7322_init_new(ppd);
7823 	return ret;
7824 }
7825 
7826 static int serdes_7322_init_old(struct qib_pportdata *ppd)
7827 {
7828 	u32 le_val;
7829 
7830 	/*
7831 	 * Initialize the Tx DDS tables.  Also done every QSFP event,
7832 	 * for adapters with QSFP
7833 	 */
7834 	init_txdds_table(ppd, 0);
7835 
7836 	/* ensure no tx overrides from earlier driver loads */
7837 	qib_write_kreg_port(ppd, krp_tx_deemph_override,
7838 		SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
7839 		reset_tx_deemphasis_override));
7840 
7841 	/* Patch some SerDes defaults to "Better for IB" */
7842 	/* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */
7843 	ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9));
7844 
7845 	/* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */
7846 	ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11));
7847 	/* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */
7848 	ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6));
7849 
7850 	/* May be overridden in qsfp_7322_event */
7851 	le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT;
7852 	ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7));
7853 
7854 	/* enable LE1 adaptation for all but QME, which is disabled */
7855 	le_val = IS_QME(ppd->dd) ? 0 : 1;
7856 	ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5));
7857 
7858 	/* Clear cmode-override, may be set from older driver */
7859 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14);
7860 
7861 	/* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */
7862 	ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8));
7863 
7864 	/* setup LoS params; these are subsystem, so chan == 5 */
7865 	/* LoS filter threshold_count on, ch 0-3, set to 8 */
7866 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11));
7867 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4));
7868 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11));
7869 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4));
7870 
7871 	/* LoS filter threshold_count off, ch 0-3, set to 4 */
7872 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0));
7873 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8));
7874 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0));
7875 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8));
7876 
7877 	/* LoS filter select enabled */
7878 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15);
7879 
7880 	/* LoS target data:  SDR=4, DDR=2, QDR=1 */
7881 	ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */
7882 	ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */
7883 	ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */
7884 
7885 	serdes_7322_los_enable(ppd, 1);
7886 
7887 	/* rxbistena; set 0 to avoid effects of it switch later */
7888 	ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15);
7889 
7890 	/* Configure 4 DFE taps, and only they adapt */
7891 	ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0));
7892 
7893 	/* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */
7894 	le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac;
7895 	ibsd_wr_allchans(ppd, 21, le_val, 0xfffe);
7896 
7897 	/*
7898 	 * Set receive adaptation mode.  SDR and DDR adaptation are
7899 	 * always on, and QDR is initially enabled; later disabled.
7900 	 */
7901 	qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL);
7902 	qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL);
7903 	qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
7904 			    ppd->dd->cspec->r1 ?
7905 			    QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN);
7906 	ppd->cpspec->qdr_dfe_on = 1;
7907 
7908 	/* FLoop LOS gate: PPM filter  enabled */
7909 	ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10);
7910 
7911 	/* rx offset center enabled */
7912 	ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4);
7913 
7914 	if (!ppd->dd->cspec->r1) {
7915 		ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12);
7916 		ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8);
7917 	}
7918 
7919 	/* Set the frequency loop bandwidth to 15 */
7920 	ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5));
7921 
7922 	return 0;
7923 }
7924 
7925 static int serdes_7322_init_new(struct qib_pportdata *ppd)
7926 {
7927 	unsigned long tend;
7928 	u32 le_val, rxcaldone;
7929 	int chan, chan_done = (1 << SERDES_CHANS) - 1;
7930 
7931 	/* Clear cmode-override, may be set from older driver */
7932 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14);
7933 
7934 	/* ensure no tx overrides from earlier driver loads */
7935 	qib_write_kreg_port(ppd, krp_tx_deemph_override,
7936 		SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
7937 		reset_tx_deemphasis_override));
7938 
7939 	/* START OF LSI SUGGESTED SERDES BRINGUP */
7940 	/* Reset - Calibration Setup */
7941 	/*       Stop DFE adaptaion */
7942 	ibsd_wr_allchans(ppd, 1, 0, BMASK(9, 1));
7943 	/*       Disable LE1 */
7944 	ibsd_wr_allchans(ppd, 13, 0, BMASK(5, 5));
7945 	/*       Disable autoadapt for LE1 */
7946 	ibsd_wr_allchans(ppd, 1, 0, BMASK(15, 15));
7947 	/*       Disable LE2 */
7948 	ibsd_wr_allchans(ppd, 13, 0, BMASK(6, 6));
7949 	/*       Disable VGA */
7950 	ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0));
7951 	/*       Disable AFE Offset Cancel */
7952 	ibsd_wr_allchans(ppd, 12, 0, BMASK(12, 12));
7953 	/*       Disable Timing Loop */
7954 	ibsd_wr_allchans(ppd, 2, 0, BMASK(3, 3));
7955 	/*       Disable Frequency Loop */
7956 	ibsd_wr_allchans(ppd, 2, 0, BMASK(4, 4));
7957 	/*       Disable Baseline Wander Correction */
7958 	ibsd_wr_allchans(ppd, 13, 0, BMASK(13, 13));
7959 	/*       Disable RX Calibration */
7960 	ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10));
7961 	/*       Disable RX Offset Calibration */
7962 	ibsd_wr_allchans(ppd, 12, 0, BMASK(4, 4));
7963 	/*       Select BB CDR */
7964 	ibsd_wr_allchans(ppd, 2, (1 << 15), BMASK(15, 15));
7965 	/*       CDR Step Size */
7966 	ibsd_wr_allchans(ppd, 5, 0, BMASK(9, 8));
7967 	/*       Enable phase Calibration */
7968 	ibsd_wr_allchans(ppd, 12, (1 << 5), BMASK(5, 5));
7969 	/*       DFE Bandwidth [2:14-12] */
7970 	ibsd_wr_allchans(ppd, 2, (4 << 12), BMASK(14, 12));
7971 	/*       DFE Config (4 taps only) */
7972 	ibsd_wr_allchans(ppd, 16, 0, BMASK(1, 0));
7973 	/*       Gain Loop Bandwidth */
7974 	if (!ppd->dd->cspec->r1) {
7975 		ibsd_wr_allchans(ppd, 12, 1 << 12, BMASK(12, 12));
7976 		ibsd_wr_allchans(ppd, 12, 2 << 8, BMASK(11, 8));
7977 	} else {
7978 		ibsd_wr_allchans(ppd, 19, (3 << 11), BMASK(13, 11));
7979 	}
7980 	/*       Baseline Wander Correction Gain [13:4-0] (leave as default) */
7981 	/*       Baseline Wander Correction Gain [3:7-5] (leave as default) */
7982 	/*       Data Rate Select [5:7-6] (leave as default) */
7983 	/*       RX Parallel Word Width [3:10-8] (leave as default) */
7984 
7985 	/* RX REST */
7986 	/*       Single- or Multi-channel reset */
7987 	/*       RX Analog reset */
7988 	/*       RX Digital reset */
7989 	ibsd_wr_allchans(ppd, 0, 0, BMASK(15, 13));
7990 	msleep(20);
7991 	/*       RX Analog reset */
7992 	ibsd_wr_allchans(ppd, 0, (1 << 14), BMASK(14, 14));
7993 	msleep(20);
7994 	/*       RX Digital reset */
7995 	ibsd_wr_allchans(ppd, 0, (1 << 13), BMASK(13, 13));
7996 	msleep(20);
7997 
7998 	/* setup LoS params; these are subsystem, so chan == 5 */
7999 	/* LoS filter threshold_count on, ch 0-3, set to 8 */
8000 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11));
8001 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4));
8002 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11));
8003 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4));
8004 
8005 	/* LoS filter threshold_count off, ch 0-3, set to 4 */
8006 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0));
8007 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8));
8008 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0));
8009 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8));
8010 
8011 	/* LoS filter select enabled */
8012 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15);
8013 
8014 	/* LoS target data:  SDR=4, DDR=2, QDR=1 */
8015 	ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */
8016 	ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */
8017 	ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */
8018 
8019 	/* Turn on LOS on initial SERDES init */
8020 	serdes_7322_los_enable(ppd, 1);
8021 	/* FLoop LOS gate: PPM filter  enabled */
8022 	ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10);
8023 
8024 	/* RX LATCH CALIBRATION */
8025 	/*       Enable Eyefinder Phase Calibration latch */
8026 	ibsd_wr_allchans(ppd, 15, 1, BMASK(0, 0));
8027 	/*       Enable RX Offset Calibration latch */
8028 	ibsd_wr_allchans(ppd, 12, (1 << 4), BMASK(4, 4));
8029 	msleep(20);
8030 	/*       Start Calibration */
8031 	ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10));
8032 	tend = jiffies + msecs_to_jiffies(500);
8033 	while (chan_done && !time_is_before_jiffies(tend)) {
8034 		msleep(20);
8035 		for (chan = 0; chan < SERDES_CHANS; ++chan) {
8036 			rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx),
8037 					    (chan + (chan >> 1)),
8038 					    25, 0, 0);
8039 			if ((~rxcaldone & (u32)BMASK(9, 9)) == 0 &&
8040 			    (~chan_done & (1 << chan)) == 0)
8041 				chan_done &= ~(1 << chan);
8042 		}
8043 	}
8044 	if (chan_done) {
8045 		pr_info("Serdes %d calibration not done after .5 sec: 0x%x\n",
8046 			 IBSD(ppd->hw_pidx), chan_done);
8047 	} else {
8048 		for (chan = 0; chan < SERDES_CHANS; ++chan) {
8049 			rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx),
8050 					    (chan + (chan >> 1)),
8051 					    25, 0, 0);
8052 			if ((~rxcaldone & (u32)BMASK(10, 10)) == 0)
8053 				pr_info("Serdes %d chan %d calibration failed\n",
8054 					IBSD(ppd->hw_pidx), chan);
8055 		}
8056 	}
8057 
8058 	/*       Turn off Calibration */
8059 	ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10));
8060 	msleep(20);
8061 
8062 	/* BRING RX UP */
8063 	/*       Set LE2 value (May be overridden in qsfp_7322_event) */
8064 	le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT;
8065 	ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7));
8066 	/*       Set LE2 Loop bandwidth */
8067 	ibsd_wr_allchans(ppd, 3, (7 << 5), BMASK(7, 5));
8068 	/*       Enable LE2 */
8069 	ibsd_wr_allchans(ppd, 13, (1 << 6), BMASK(6, 6));
8070 	msleep(20);
8071 	/*       Enable H0 only */
8072 	ibsd_wr_allchans(ppd, 1, 1, BMASK(9, 1));
8073 	/* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */
8074 	le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac;
8075 	ibsd_wr_allchans(ppd, 21, le_val, 0xfffe);
8076 	/*       Enable VGA */
8077 	ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0));
8078 	msleep(20);
8079 	/*       Set Frequency Loop Bandwidth */
8080 	ibsd_wr_allchans(ppd, 2, (15 << 5), BMASK(8, 5));
8081 	/*       Enable Frequency Loop */
8082 	ibsd_wr_allchans(ppd, 2, (1 << 4), BMASK(4, 4));
8083 	/*       Set Timing Loop Bandwidth */
8084 	ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9));
8085 	/*       Enable Timing Loop */
8086 	ibsd_wr_allchans(ppd, 2, (1 << 3), BMASK(3, 3));
8087 	msleep(50);
8088 	/*       Enable DFE
8089 	 *       Set receive adaptation mode.  SDR and DDR adaptation are
8090 	 *       always on, and QDR is initially enabled; later disabled.
8091 	 */
8092 	qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL);
8093 	qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL);
8094 	qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
8095 			    ppd->dd->cspec->r1 ?
8096 			    QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN);
8097 	ppd->cpspec->qdr_dfe_on = 1;
8098 	/*       Disable LE1  */
8099 	ibsd_wr_allchans(ppd, 13, (0 << 5), (1 << 5));
8100 	/*       Disable auto adapt for LE1 */
8101 	ibsd_wr_allchans(ppd, 1, (0 << 15), BMASK(15, 15));
8102 	msleep(20);
8103 	/*       Enable AFE Offset Cancel */
8104 	ibsd_wr_allchans(ppd, 12, (1 << 12), BMASK(12, 12));
8105 	/*       Enable Baseline Wander Correction */
8106 	ibsd_wr_allchans(ppd, 12, (1 << 13), BMASK(13, 13));
8107 	/* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */
8108 	ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11));
8109 	/* VGA output common mode */
8110 	ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2));
8111 
8112 	/*
8113 	 * Initialize the Tx DDS tables.  Also done every QSFP event,
8114 	 * for adapters with QSFP
8115 	 */
8116 	init_txdds_table(ppd, 0);
8117 
8118 	return 0;
8119 }
8120 
8121 /* start adjust QMH serdes parameters */
8122 
8123 static void set_man_code(struct qib_pportdata *ppd, int chan, int code)
8124 {
8125 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8126 		9, code << 9, 0x3f << 9);
8127 }
8128 
8129 static void set_man_mode_h1(struct qib_pportdata *ppd, int chan,
8130 	int enable, u32 tapenable)
8131 {
8132 	if (enable)
8133 		ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8134 			1, 3 << 10, 0x1f << 10);
8135 	else
8136 		ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8137 			1, 0, 0x1f << 10);
8138 }
8139 
8140 /* Set clock to 1, 0, 1, 0 */
8141 static void clock_man(struct qib_pportdata *ppd, int chan)
8142 {
8143 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8144 		4, 0x4000, 0x4000);
8145 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8146 		4, 0, 0x4000);
8147 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8148 		4, 0x4000, 0x4000);
8149 	ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8150 		4, 0, 0x4000);
8151 }
8152 
8153 /*
8154  * write the current Tx serdes pre,post,main,amp settings into the serdes.
8155  * The caller must pass the settings appropriate for the current speed,
8156  * or not care if they are correct for the current speed.
8157  */
8158 static void write_tx_serdes_param(struct qib_pportdata *ppd,
8159 				  struct txdds_ent *txdds)
8160 {
8161 	u64 deemph;
8162 
8163 	deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override);
8164 	/* field names for amp, main, post, pre, respectively */
8165 	deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) |
8166 		    SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) |
8167 		    SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) |
8168 		    SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena));
8169 
8170 	deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8171 			   tx_override_deemphasis_select);
8172 	deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8173 		    txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8174 				       txampcntl_d2a);
8175 	deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8176 		     txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8177 				   txc0_ena);
8178 	deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8179 		     txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8180 				    txcp1_ena);
8181 	deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8182 		     txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8183 				    txcn1_ena);
8184 	qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph);
8185 }
8186 
8187 /*
8188  * Set the parameters for mez cards on link bounce, so they are
8189  * always exactly what was requested.  Similar logic to init_txdds
8190  * but does just the serdes.
8191  */
8192 static void adj_tx_serdes(struct qib_pportdata *ppd)
8193 {
8194 	const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds;
8195 	struct txdds_ent *dds;
8196 
8197 	find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1);
8198 	dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ?
8199 		qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ?
8200 				ddr_dds : sdr_dds));
8201 	write_tx_serdes_param(ppd, dds);
8202 }
8203 
8204 /* set QDR forced value for H1, if needed */
8205 static void force_h1(struct qib_pportdata *ppd)
8206 {
8207 	int chan;
8208 
8209 	ppd->cpspec->qdr_reforce = 0;
8210 	if (!ppd->dd->cspec->r1)
8211 		return;
8212 
8213 	for (chan = 0; chan < SERDES_CHANS; chan++) {
8214 		set_man_mode_h1(ppd, chan, 1, 0);
8215 		set_man_code(ppd, chan, ppd->cpspec->h1_val);
8216 		clock_man(ppd, chan);
8217 		set_man_mode_h1(ppd, chan, 0, 0);
8218 	}
8219 }
8220 
8221 #define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN)
8222 #define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en)
8223 
8224 #define R_OPCODE_LSB 3
8225 #define R_OP_NOP 0
8226 #define R_OP_SHIFT 2
8227 #define R_OP_UPDATE 3
8228 #define R_TDI_LSB 2
8229 #define R_TDO_LSB 1
8230 #define R_RDY 1
8231 
8232 static int qib_r_grab(struct qib_devdata *dd)
8233 {
8234 	u64 val = SJA_EN;
8235 
8236 	qib_write_kreg(dd, kr_r_access, val);
8237 	qib_read_kreg32(dd, kr_scratch);
8238 	return 0;
8239 }
8240 
8241 /* qib_r_wait_for_rdy() not only waits for the ready bit, it
8242  * returns the current state of R_TDO
8243  */
8244 static int qib_r_wait_for_rdy(struct qib_devdata *dd)
8245 {
8246 	u64 val;
8247 	int timeout;
8248 
8249 	for (timeout = 0; timeout < 100 ; ++timeout) {
8250 		val = qib_read_kreg32(dd, kr_r_access);
8251 		if (val & R_RDY)
8252 			return (val >> R_TDO_LSB) & 1;
8253 	}
8254 	return -1;
8255 }
8256 
8257 static int qib_r_shift(struct qib_devdata *dd, int bisten,
8258 		       int len, u8 *inp, u8 *outp)
8259 {
8260 	u64 valbase, val;
8261 	int ret, pos;
8262 
8263 	valbase = SJA_EN | (bisten << BISTEN_LSB) |
8264 		(R_OP_SHIFT << R_OPCODE_LSB);
8265 	ret = qib_r_wait_for_rdy(dd);
8266 	if (ret < 0)
8267 		goto bail;
8268 	for (pos = 0; pos < len; ++pos) {
8269 		val = valbase;
8270 		if (outp) {
8271 			outp[pos >> 3] &= ~(1 << (pos & 7));
8272 			outp[pos >> 3] |= (ret << (pos & 7));
8273 		}
8274 		if (inp) {
8275 			int tdi = inp[pos >> 3] >> (pos & 7);
8276 
8277 			val |= ((tdi & 1) << R_TDI_LSB);
8278 		}
8279 		qib_write_kreg(dd, kr_r_access, val);
8280 		qib_read_kreg32(dd, kr_scratch);
8281 		ret = qib_r_wait_for_rdy(dd);
8282 		if (ret < 0)
8283 			break;
8284 	}
8285 	/* Restore to NOP between operations. */
8286 	val =  SJA_EN | (bisten << BISTEN_LSB);
8287 	qib_write_kreg(dd, kr_r_access, val);
8288 	qib_read_kreg32(dd, kr_scratch);
8289 	ret = qib_r_wait_for_rdy(dd);
8290 
8291 	if (ret >= 0)
8292 		ret = pos;
8293 bail:
8294 	return ret;
8295 }
8296 
8297 static int qib_r_update(struct qib_devdata *dd, int bisten)
8298 {
8299 	u64 val;
8300 	int ret;
8301 
8302 	val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB);
8303 	ret = qib_r_wait_for_rdy(dd);
8304 	if (ret >= 0) {
8305 		qib_write_kreg(dd, kr_r_access, val);
8306 		qib_read_kreg32(dd, kr_scratch);
8307 	}
8308 	return ret;
8309 }
8310 
8311 #define BISTEN_PORT_SEL 15
8312 #define LEN_PORT_SEL 625
8313 #define BISTEN_AT 17
8314 #define LEN_AT 156
8315 #define BISTEN_ETM 16
8316 #define LEN_ETM 632
8317 
8318 #define BIT2BYTE(x) (((x) +  BITS_PER_BYTE - 1) / BITS_PER_BYTE)
8319 
8320 /* these are common for all IB port use cases. */
8321 static u8 reset_at[BIT2BYTE(LEN_AT)] = {
8322 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8323 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
8324 };
8325 static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = {
8326 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8327 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8328 	0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e,
8329 	0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7,
8330 	0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70,
8331 	0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00,
8332 	0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8333 	0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
8334 };
8335 static u8 at[BIT2BYTE(LEN_AT)] = {
8336 	0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00,
8337 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
8338 };
8339 
8340 /* used for IB1 or IB2, only one in use */
8341 static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = {
8342 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8343 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8344 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8345 	0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00,
8346 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8347 	0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03,
8348 	0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00,
8349 	0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00,
8350 };
8351 
8352 /* used when both IB1 and IB2 are in use */
8353 static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = {
8354 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8355 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79,
8356 	0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8357 	0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05,
8358 	0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
8359 	0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07,
8360 	0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00,
8361 	0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00,
8362 };
8363 
8364 /* used when only IB1 is in use */
8365 static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = {
8366 	0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13,
8367 	0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c,
8368 	0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
8369 	0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
8370 	0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32,
8371 	0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
8372 	0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
8373 	0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
8374 };
8375 
8376 /* used when only IB2 is in use */
8377 static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = {
8378 	0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39,
8379 	0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32,
8380 	0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39,
8381 	0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39,
8382 	0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32,
8383 	0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a,
8384 	0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a,
8385 	0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
8386 };
8387 
8388 /* used when both IB1 and IB2 are in use */
8389 static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = {
8390 	0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13,
8391 	0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c,
8392 	0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
8393 	0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
8394 	0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32,
8395 	0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a,
8396 	0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
8397 	0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
8398 };
8399 
8400 /*
8401  * Do setup to properly handle IB link recovery; if port is zero, we
8402  * are initializing to cover both ports; otherwise we are initializing
8403  * to cover a single port card, or the port has reached INIT and we may
8404  * need to switch coverage types.
8405  */
8406 static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both)
8407 {
8408 	u8 *portsel, *etm;
8409 	struct qib_devdata *dd = ppd->dd;
8410 
8411 	if (!ppd->dd->cspec->r1)
8412 		return;
8413 	if (!both) {
8414 		dd->cspec->recovery_ports_initted++;
8415 		ppd->cpspec->recovery_init = 1;
8416 	}
8417 	if (!both && dd->cspec->recovery_ports_initted == 1) {
8418 		portsel = ppd->port == 1 ? portsel_port1 : portsel_port2;
8419 		etm = atetm_1port;
8420 	} else {
8421 		portsel = portsel_2port;
8422 		etm = atetm_2port;
8423 	}
8424 
8425 	if (qib_r_grab(dd) < 0 ||
8426 		qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 ||
8427 		qib_r_update(dd, BISTEN_ETM) < 0 ||
8428 		qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 ||
8429 		qib_r_update(dd, BISTEN_AT) < 0 ||
8430 		qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL,
8431 			    portsel, NULL) < 0 ||
8432 		qib_r_update(dd, BISTEN_PORT_SEL) < 0 ||
8433 		qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 ||
8434 		qib_r_update(dd, BISTEN_AT) < 0 ||
8435 		qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 ||
8436 		qib_r_update(dd, BISTEN_ETM) < 0)
8437 		qib_dev_err(dd, "Failed IB link recovery setup\n");
8438 }
8439 
8440 static void check_7322_rxe_status(struct qib_pportdata *ppd)
8441 {
8442 	struct qib_devdata *dd = ppd->dd;
8443 	u64 fmask;
8444 
8445 	if (dd->cspec->recovery_ports_initted != 1)
8446 		return; /* rest doesn't apply to dualport */
8447 	qib_write_kreg(dd, kr_control, dd->control |
8448 		       SYM_MASK(Control, FreezeMode));
8449 	(void)qib_read_kreg64(dd, kr_scratch);
8450 	udelay(3); /* ibcreset asserted 400ns, be sure that's over */
8451 	fmask = qib_read_kreg64(dd, kr_act_fmask);
8452 	if (!fmask) {
8453 		/*
8454 		 * require a powercycle before we'll work again, and make
8455 		 * sure we get no more interrupts, and don't turn off
8456 		 * freeze.
8457 		 */
8458 		ppd->dd->cspec->stay_in_freeze = 1;
8459 		qib_7322_set_intr_state(ppd->dd, 0);
8460 		qib_write_kreg(dd, kr_fmask, 0ULL);
8461 		qib_dev_err(dd, "HCA unusable until powercycled\n");
8462 		return; /* eventually reset */
8463 	}
8464 
8465 	qib_write_kreg(ppd->dd, kr_hwerrclear,
8466 	    SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1));
8467 
8468 	/* don't do the full clear_freeze(), not needed for this */
8469 	qib_write_kreg(dd, kr_control, dd->control);
8470 	qib_read_kreg32(dd, kr_scratch);
8471 	/* take IBC out of reset */
8472 	if (ppd->link_speed_supported) {
8473 		ppd->cpspec->ibcctrl_a &=
8474 			~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn);
8475 		qib_write_kreg_port(ppd, krp_ibcctrl_a,
8476 				    ppd->cpspec->ibcctrl_a);
8477 		qib_read_kreg32(dd, kr_scratch);
8478 		if (ppd->lflags & QIBL_IB_LINK_DISABLED)
8479 			qib_set_ib_7322_lstate(ppd, 0,
8480 				QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
8481 	}
8482 }
8483