1 /*
2  * Copyright (c) 2012 Intel Corporation. All rights reserved.
3  * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
4  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
5  *
6  * This software is available to you under a choice of one of two
7  * licenses.  You may choose to be licensed under the terms of the GNU
8  * General Public License (GPL) Version 2, available from the file
9  * COPYING in the main directory of this source tree, or the
10  * OpenIB.org BSD license below:
11  *
12  *     Redistribution and use in source and binary forms, with or
13  *     without modification, are permitted provided that the following
14  *     conditions are met:
15  *
16  *      - Redistributions of source code must retain the above
17  *        copyright notice, this list of conditions and the following
18  *        disclaimer.
19  *
20  *      - Redistributions in binary form must reproduce the above
21  *        copyright notice, this list of conditions and the following
22  *        disclaimer in the documentation and/or other materials
23  *        provided with the distribution.
24  *
25  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
32  * SOFTWARE.
33  */
34 
35 #include <linux/delay.h>
36 #include <linux/pci.h>
37 #include <linux/vmalloc.h>
38 
39 #include "qib.h"
40 
41 /*
42  * Functions specific to the serial EEPROM on cards handled by ib_qib.
43  * The actual serail interface code is in qib_twsi.c. This file is a client
44  */
45 
46 /**
47  * qib_eeprom_read - receives bytes from the eeprom via I2C
48  * @dd: the qlogic_ib device
49  * @eeprom_offset: address to read from
50  * @buffer: where to store result
51  * @len: number of bytes to receive
52  */
53 int qib_eeprom_read(struct qib_devdata *dd, u8 eeprom_offset,
54 		    void *buff, int len)
55 {
56 	int ret;
57 
58 	ret = mutex_lock_interruptible(&dd->eep_lock);
59 	if (!ret) {
60 		ret = qib_twsi_reset(dd);
61 		if (ret)
62 			qib_dev_err(dd, "EEPROM Reset for read failed\n");
63 		else
64 			ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev,
65 					      eeprom_offset, buff, len);
66 		mutex_unlock(&dd->eep_lock);
67 	}
68 
69 	return ret;
70 }
71 
72 /*
73  * Actually update the eeprom, first doing write enable if
74  * needed, then restoring write enable state.
75  * Must be called with eep_lock held
76  */
77 static int eeprom_write_with_enable(struct qib_devdata *dd, u8 offset,
78 		     const void *buf, int len)
79 {
80 	int ret, pwen;
81 
82 	pwen = dd->f_eeprom_wen(dd, 1);
83 	ret = qib_twsi_reset(dd);
84 	if (ret)
85 		qib_dev_err(dd, "EEPROM Reset for write failed\n");
86 	else
87 		ret = qib_twsi_blk_wr(dd, dd->twsi_eeprom_dev,
88 				      offset, buf, len);
89 	dd->f_eeprom_wen(dd, pwen);
90 	return ret;
91 }
92 
93 /**
94  * qib_eeprom_write - writes data to the eeprom via I2C
95  * @dd: the qlogic_ib device
96  * @eeprom_offset: where to place data
97  * @buffer: data to write
98  * @len: number of bytes to write
99  */
100 int qib_eeprom_write(struct qib_devdata *dd, u8 eeprom_offset,
101 		     const void *buff, int len)
102 {
103 	int ret;
104 
105 	ret = mutex_lock_interruptible(&dd->eep_lock);
106 	if (!ret) {
107 		ret = eeprom_write_with_enable(dd, eeprom_offset, buff, len);
108 		mutex_unlock(&dd->eep_lock);
109 	}
110 
111 	return ret;
112 }
113 
114 static u8 flash_csum(struct qib_flash *ifp, int adjust)
115 {
116 	u8 *ip = (u8 *) ifp;
117 	u8 csum = 0, len;
118 
119 	/*
120 	 * Limit length checksummed to max length of actual data.
121 	 * Checksum of erased eeprom will still be bad, but we avoid
122 	 * reading past the end of the buffer we were passed.
123 	 */
124 	len = ifp->if_length;
125 	if (len > sizeof(struct qib_flash))
126 		len = sizeof(struct qib_flash);
127 	while (len--)
128 		csum += *ip++;
129 	csum -= ifp->if_csum;
130 	csum = ~csum;
131 	if (adjust)
132 		ifp->if_csum = csum;
133 
134 	return csum;
135 }
136 
137 /**
138  * qib_get_eeprom_info- get the GUID et al. from the TSWI EEPROM device
139  * @dd: the qlogic_ib device
140  *
141  * We have the capability to use the nguid field, and get
142  * the guid from the first chip's flash, to use for all of them.
143  */
144 void qib_get_eeprom_info(struct qib_devdata *dd)
145 {
146 	void *buf;
147 	struct qib_flash *ifp;
148 	__be64 guid;
149 	int len, eep_stat;
150 	u8 csum, *bguid;
151 	int t = dd->unit;
152 	struct qib_devdata *dd0 = qib_lookup(0);
153 
154 	if (t && dd0->nguid > 1 && t <= dd0->nguid) {
155 		u8 oguid;
156 
157 		dd->base_guid = dd0->base_guid;
158 		bguid = (u8 *) &dd->base_guid;
159 
160 		oguid = bguid[7];
161 		bguid[7] += t;
162 		if (oguid > bguid[7]) {
163 			if (bguid[6] == 0xff) {
164 				if (bguid[5] == 0xff) {
165 					qib_dev_err(dd,
166 						    "Can't set GUID from base, wraps to OUI!\n");
167 					dd->base_guid = 0;
168 					goto bail;
169 				}
170 				bguid[5]++;
171 			}
172 			bguid[6]++;
173 		}
174 		dd->nguid = 1;
175 		goto bail;
176 	}
177 
178 	/*
179 	 * Read full flash, not just currently used part, since it may have
180 	 * been written with a newer definition.
181 	 * */
182 	len = sizeof(struct qib_flash);
183 	buf = vmalloc(len);
184 	if (!buf)
185 		goto bail;
186 
187 	/*
188 	 * Use "public" eeprom read function, which does locking and
189 	 * figures out device. This will migrate to chip-specific.
190 	 */
191 	eep_stat = qib_eeprom_read(dd, 0, buf, len);
192 
193 	if (eep_stat) {
194 		qib_dev_err(dd, "Failed reading GUID from eeprom\n");
195 		goto done;
196 	}
197 	ifp = (struct qib_flash *)buf;
198 
199 	csum = flash_csum(ifp, 0);
200 	if (csum != ifp->if_csum) {
201 		qib_devinfo(dd->pcidev,
202 			"Bad I2C flash checksum: 0x%x, not 0x%x\n",
203 			csum, ifp->if_csum);
204 		goto done;
205 	}
206 	if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
207 	    *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
208 		qib_dev_err(dd,
209 			"Invalid GUID %llx from flash; ignoring\n",
210 			*(unsigned long long *) ifp->if_guid);
211 		/* don't allow GUID if all 0 or all 1's */
212 		goto done;
213 	}
214 
215 	/* complain, but allow it */
216 	if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
217 		qib_devinfo(dd->pcidev,
218 			"Warning, GUID %llx is default, probably not correct!\n",
219 			*(unsigned long long *) ifp->if_guid);
220 
221 	bguid = ifp->if_guid;
222 	if (!bguid[0] && !bguid[1] && !bguid[2]) {
223 		/*
224 		 * Original incorrect GUID format in flash; fix in
225 		 * core copy, by shifting up 2 octets; don't need to
226 		 * change top octet, since both it and shifted are 0.
227 		 */
228 		bguid[1] = bguid[3];
229 		bguid[2] = bguid[4];
230 		bguid[3] = 0;
231 		bguid[4] = 0;
232 		guid = *(__be64 *) ifp->if_guid;
233 	} else
234 		guid = *(__be64 *) ifp->if_guid;
235 	dd->base_guid = guid;
236 	dd->nguid = ifp->if_numguid;
237 	/*
238 	 * Things are slightly complicated by the desire to transparently
239 	 * support both the Pathscale 10-digit serial number and the QLogic
240 	 * 13-character version.
241 	 */
242 	if ((ifp->if_fversion > 1) && ifp->if_sprefix[0] &&
243 	    ((u8 *) ifp->if_sprefix)[0] != 0xFF) {
244 		char *snp = dd->serial;
245 
246 		/*
247 		 * This board has a Serial-prefix, which is stored
248 		 * elsewhere for backward-compatibility.
249 		 */
250 		memcpy(snp, ifp->if_sprefix, sizeof(ifp->if_sprefix));
251 		snp[sizeof(ifp->if_sprefix)] = '\0';
252 		len = strlen(snp);
253 		snp += len;
254 		len = sizeof(dd->serial) - len;
255 		if (len > sizeof(ifp->if_serial))
256 			len = sizeof(ifp->if_serial);
257 		memcpy(snp, ifp->if_serial, len);
258 	} else {
259 		memcpy(dd->serial, ifp->if_serial, sizeof(ifp->if_serial));
260 	}
261 	if (!strstr(ifp->if_comment, "Tested successfully"))
262 		qib_dev_err(dd,
263 			"Board SN %s did not pass functional test: %s\n",
264 			dd->serial, ifp->if_comment);
265 
266 done:
267 	vfree(buf);
268 
269 bail:;
270 }
271 
272