1 /* 2 * Copyright (c) 2013 Intel Corporation. All rights reserved. 3 * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved. 4 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. 5 * 6 * This software is available to you under a choice of one of two 7 * licenses. You may choose to be licensed under the terms of the GNU 8 * General Public License (GPL) Version 2, available from the file 9 * COPYING in the main directory of this source tree, or the 10 * OpenIB.org BSD license below: 11 * 12 * Redistribution and use in source and binary forms, with or 13 * without modification, are permitted provided that the following 14 * conditions are met: 15 * 16 * - Redistributions of source code must retain the above 17 * copyright notice, this list of conditions and the following 18 * disclaimer. 19 * 20 * - Redistributions in binary form must reproduce the above 21 * copyright notice, this list of conditions and the following 22 * disclaimer in the documentation and/or other materials 23 * provided with the distribution. 24 * 25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 32 * SOFTWARE. 33 */ 34 35 #include <linux/spinlock.h> 36 #include <linux/pci.h> 37 #include <linux/io.h> 38 #include <linux/delay.h> 39 #include <linux/netdevice.h> 40 #include <linux/vmalloc.h> 41 #include <linux/module.h> 42 #include <linux/prefetch.h> 43 44 #include "qib.h" 45 46 /* 47 * The size has to be longer than this string, so we can append 48 * board/chip information to it in the init code. 49 */ 50 const char ib_qib_version[] = QIB_DRIVER_VERSION "\n"; 51 52 DEFINE_SPINLOCK(qib_devs_lock); 53 LIST_HEAD(qib_dev_list); 54 DEFINE_MUTEX(qib_mutex); /* general driver use */ 55 56 unsigned qib_ibmtu; 57 module_param_named(ibmtu, qib_ibmtu, uint, S_IRUGO); 58 MODULE_PARM_DESC(ibmtu, "Set max IB MTU (0=2KB, 1=256, 2=512, ... 5=4096"); 59 60 unsigned qib_compat_ddr_negotiate = 1; 61 module_param_named(compat_ddr_negotiate, qib_compat_ddr_negotiate, uint, 62 S_IWUSR | S_IRUGO); 63 MODULE_PARM_DESC(compat_ddr_negotiate, 64 "Attempt pre-IBTA 1.2 DDR speed negotiation"); 65 66 MODULE_LICENSE("Dual BSD/GPL"); 67 MODULE_AUTHOR("Intel <ibsupport@intel.com>"); 68 MODULE_DESCRIPTION("Intel IB driver"); 69 MODULE_VERSION(QIB_DRIVER_VERSION); 70 71 /* 72 * QIB_PIO_MAXIBHDR is the max IB header size allowed for in our 73 * PIO send buffers. This is well beyond anything currently 74 * defined in the InfiniBand spec. 75 */ 76 #define QIB_PIO_MAXIBHDR 128 77 78 /* 79 * QIB_MAX_PKT_RCV is the max # if packets processed per receive interrupt. 80 */ 81 #define QIB_MAX_PKT_RECV 64 82 83 struct qlogic_ib_stats qib_stats; 84 85 const char *qib_get_unit_name(int unit) 86 { 87 static char iname[16]; 88 89 snprintf(iname, sizeof iname, "infinipath%u", unit); 90 return iname; 91 } 92 93 /* 94 * Return count of units with at least one port ACTIVE. 95 */ 96 int qib_count_active_units(void) 97 { 98 struct qib_devdata *dd; 99 struct qib_pportdata *ppd; 100 unsigned long flags; 101 int pidx, nunits_active = 0; 102 103 spin_lock_irqsave(&qib_devs_lock, flags); 104 list_for_each_entry(dd, &qib_dev_list, list) { 105 if (!(dd->flags & QIB_PRESENT) || !dd->kregbase) 106 continue; 107 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 108 ppd = dd->pport + pidx; 109 if (ppd->lid && (ppd->lflags & (QIBL_LINKINIT | 110 QIBL_LINKARMED | QIBL_LINKACTIVE))) { 111 nunits_active++; 112 break; 113 } 114 } 115 } 116 spin_unlock_irqrestore(&qib_devs_lock, flags); 117 return nunits_active; 118 } 119 120 /* 121 * Return count of all units, optionally return in arguments 122 * the number of usable (present) units, and the number of 123 * ports that are up. 124 */ 125 int qib_count_units(int *npresentp, int *nupp) 126 { 127 int nunits = 0, npresent = 0, nup = 0; 128 struct qib_devdata *dd; 129 unsigned long flags; 130 int pidx; 131 struct qib_pportdata *ppd; 132 133 spin_lock_irqsave(&qib_devs_lock, flags); 134 135 list_for_each_entry(dd, &qib_dev_list, list) { 136 nunits++; 137 if ((dd->flags & QIB_PRESENT) && dd->kregbase) 138 npresent++; 139 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 140 ppd = dd->pport + pidx; 141 if (ppd->lid && (ppd->lflags & (QIBL_LINKINIT | 142 QIBL_LINKARMED | QIBL_LINKACTIVE))) 143 nup++; 144 } 145 } 146 147 spin_unlock_irqrestore(&qib_devs_lock, flags); 148 149 if (npresentp) 150 *npresentp = npresent; 151 if (nupp) 152 *nupp = nup; 153 154 return nunits; 155 } 156 157 /** 158 * qib_wait_linkstate - wait for an IB link state change to occur 159 * @dd: the qlogic_ib device 160 * @state: the state to wait for 161 * @msecs: the number of milliseconds to wait 162 * 163 * wait up to msecs milliseconds for IB link state change to occur for 164 * now, take the easy polling route. Currently used only by 165 * qib_set_linkstate. Returns 0 if state reached, otherwise 166 * -ETIMEDOUT state can have multiple states set, for any of several 167 * transitions. 168 */ 169 int qib_wait_linkstate(struct qib_pportdata *ppd, u32 state, int msecs) 170 { 171 int ret; 172 unsigned long flags; 173 174 spin_lock_irqsave(&ppd->lflags_lock, flags); 175 if (ppd->state_wanted) { 176 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 177 ret = -EBUSY; 178 goto bail; 179 } 180 ppd->state_wanted = state; 181 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 182 wait_event_interruptible_timeout(ppd->state_wait, 183 (ppd->lflags & state), 184 msecs_to_jiffies(msecs)); 185 spin_lock_irqsave(&ppd->lflags_lock, flags); 186 ppd->state_wanted = 0; 187 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 188 189 if (!(ppd->lflags & state)) 190 ret = -ETIMEDOUT; 191 else 192 ret = 0; 193 bail: 194 return ret; 195 } 196 197 int qib_set_linkstate(struct qib_pportdata *ppd, u8 newstate) 198 { 199 u32 lstate; 200 int ret; 201 struct qib_devdata *dd = ppd->dd; 202 unsigned long flags; 203 204 switch (newstate) { 205 case QIB_IB_LINKDOWN_ONLY: 206 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 207 IB_LINKCMD_DOWN | IB_LINKINITCMD_NOP); 208 /* don't wait */ 209 ret = 0; 210 goto bail; 211 212 case QIB_IB_LINKDOWN: 213 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 214 IB_LINKCMD_DOWN | IB_LINKINITCMD_POLL); 215 /* don't wait */ 216 ret = 0; 217 goto bail; 218 219 case QIB_IB_LINKDOWN_SLEEP: 220 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 221 IB_LINKCMD_DOWN | IB_LINKINITCMD_SLEEP); 222 /* don't wait */ 223 ret = 0; 224 goto bail; 225 226 case QIB_IB_LINKDOWN_DISABLE: 227 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 228 IB_LINKCMD_DOWN | IB_LINKINITCMD_DISABLE); 229 /* don't wait */ 230 ret = 0; 231 goto bail; 232 233 case QIB_IB_LINKARM: 234 if (ppd->lflags & QIBL_LINKARMED) { 235 ret = 0; 236 goto bail; 237 } 238 if (!(ppd->lflags & (QIBL_LINKINIT | QIBL_LINKACTIVE))) { 239 ret = -EINVAL; 240 goto bail; 241 } 242 /* 243 * Since the port can be ACTIVE when we ask for ARMED, 244 * clear QIBL_LINKV so we can wait for a transition. 245 * If the link isn't ARMED, then something else happened 246 * and there is no point waiting for ARMED. 247 */ 248 spin_lock_irqsave(&ppd->lflags_lock, flags); 249 ppd->lflags &= ~QIBL_LINKV; 250 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 251 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 252 IB_LINKCMD_ARMED | IB_LINKINITCMD_NOP); 253 lstate = QIBL_LINKV; 254 break; 255 256 case QIB_IB_LINKACTIVE: 257 if (ppd->lflags & QIBL_LINKACTIVE) { 258 ret = 0; 259 goto bail; 260 } 261 if (!(ppd->lflags & QIBL_LINKARMED)) { 262 ret = -EINVAL; 263 goto bail; 264 } 265 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 266 IB_LINKCMD_ACTIVE | IB_LINKINITCMD_NOP); 267 lstate = QIBL_LINKACTIVE; 268 break; 269 270 default: 271 ret = -EINVAL; 272 goto bail; 273 } 274 ret = qib_wait_linkstate(ppd, lstate, 10); 275 276 bail: 277 return ret; 278 } 279 280 /* 281 * Get address of eager buffer from it's index (allocated in chunks, not 282 * contiguous). 283 */ 284 static inline void *qib_get_egrbuf(const struct qib_ctxtdata *rcd, u32 etail) 285 { 286 const u32 chunk = etail >> rcd->rcvegrbufs_perchunk_shift; 287 const u32 idx = etail & ((u32)rcd->rcvegrbufs_perchunk - 1); 288 289 return rcd->rcvegrbuf[chunk] + (idx << rcd->dd->rcvegrbufsize_shift); 290 } 291 292 /* 293 * Returns 1 if error was a CRC, else 0. 294 * Needed for some chip's synthesized error counters. 295 */ 296 static u32 qib_rcv_hdrerr(struct qib_ctxtdata *rcd, struct qib_pportdata *ppd, 297 u32 ctxt, u32 eflags, u32 l, u32 etail, 298 __le32 *rhf_addr, struct qib_message_header *rhdr) 299 { 300 u32 ret = 0; 301 302 if (eflags & (QLOGIC_IB_RHF_H_ICRCERR | QLOGIC_IB_RHF_H_VCRCERR)) 303 ret = 1; 304 else if (eflags == QLOGIC_IB_RHF_H_TIDERR) { 305 /* For TIDERR and RC QPs premptively schedule a NAK */ 306 struct qib_ib_header *hdr = (struct qib_ib_header *) rhdr; 307 struct qib_other_headers *ohdr = NULL; 308 struct qib_ibport *ibp = &ppd->ibport_data; 309 struct qib_qp *qp = NULL; 310 u32 tlen = qib_hdrget_length_in_bytes(rhf_addr); 311 u16 lid = be16_to_cpu(hdr->lrh[1]); 312 int lnh = be16_to_cpu(hdr->lrh[0]) & 3; 313 u32 qp_num; 314 u32 opcode; 315 u32 psn; 316 int diff; 317 318 /* Sanity check packet */ 319 if (tlen < 24) 320 goto drop; 321 322 if (lid < QIB_MULTICAST_LID_BASE) { 323 lid &= ~((1 << ppd->lmc) - 1); 324 if (unlikely(lid != ppd->lid)) 325 goto drop; 326 } 327 328 /* Check for GRH */ 329 if (lnh == QIB_LRH_BTH) 330 ohdr = &hdr->u.oth; 331 else if (lnh == QIB_LRH_GRH) { 332 u32 vtf; 333 334 ohdr = &hdr->u.l.oth; 335 if (hdr->u.l.grh.next_hdr != IB_GRH_NEXT_HDR) 336 goto drop; 337 vtf = be32_to_cpu(hdr->u.l.grh.version_tclass_flow); 338 if ((vtf >> IB_GRH_VERSION_SHIFT) != IB_GRH_VERSION) 339 goto drop; 340 } else 341 goto drop; 342 343 /* Get opcode and PSN from packet */ 344 opcode = be32_to_cpu(ohdr->bth[0]); 345 opcode >>= 24; 346 psn = be32_to_cpu(ohdr->bth[2]); 347 348 /* Get the destination QP number. */ 349 qp_num = be32_to_cpu(ohdr->bth[1]) & QIB_QPN_MASK; 350 if (qp_num != QIB_MULTICAST_QPN) { 351 int ruc_res; 352 qp = qib_lookup_qpn(ibp, qp_num); 353 if (!qp) 354 goto drop; 355 356 /* 357 * Handle only RC QPs - for other QP types drop error 358 * packet. 359 */ 360 spin_lock(&qp->r_lock); 361 362 /* Check for valid receive state. */ 363 if (!(ib_qib_state_ops[qp->state] & 364 QIB_PROCESS_RECV_OK)) { 365 ibp->n_pkt_drops++; 366 goto unlock; 367 } 368 369 switch (qp->ibqp.qp_type) { 370 case IB_QPT_RC: 371 ruc_res = 372 qib_ruc_check_hdr( 373 ibp, hdr, 374 lnh == QIB_LRH_GRH, 375 qp, 376 be32_to_cpu(ohdr->bth[0])); 377 if (ruc_res) 378 goto unlock; 379 380 /* Only deal with RDMA Writes for now */ 381 if (opcode < 382 IB_OPCODE_RC_RDMA_READ_RESPONSE_FIRST) { 383 diff = qib_cmp24(psn, qp->r_psn); 384 if (!qp->r_nak_state && diff >= 0) { 385 ibp->n_rc_seqnak++; 386 qp->r_nak_state = 387 IB_NAK_PSN_ERROR; 388 /* Use the expected PSN. */ 389 qp->r_ack_psn = qp->r_psn; 390 /* 391 * Wait to send the sequence 392 * NAK until all packets 393 * in the receive queue have 394 * been processed. 395 * Otherwise, we end up 396 * propagating congestion. 397 */ 398 if (list_empty(&qp->rspwait)) { 399 qp->r_flags |= 400 QIB_R_RSP_NAK; 401 atomic_inc( 402 &qp->refcount); 403 list_add_tail( 404 &qp->rspwait, 405 &rcd->qp_wait_list); 406 } 407 } /* Out of sequence NAK */ 408 } /* QP Request NAKs */ 409 break; 410 case IB_QPT_SMI: 411 case IB_QPT_GSI: 412 case IB_QPT_UD: 413 case IB_QPT_UC: 414 default: 415 /* For now don't handle any other QP types */ 416 break; 417 } 418 419 unlock: 420 spin_unlock(&qp->r_lock); 421 /* 422 * Notify qib_destroy_qp() if it is waiting 423 * for us to finish. 424 */ 425 if (atomic_dec_and_test(&qp->refcount)) 426 wake_up(&qp->wait); 427 } /* Unicast QP */ 428 } /* Valid packet with TIDErr */ 429 430 drop: 431 return ret; 432 } 433 434 /* 435 * qib_kreceive - receive a packet 436 * @rcd: the qlogic_ib context 437 * @llic: gets count of good packets needed to clear lli, 438 * (used with chips that need need to track crcs for lli) 439 * 440 * called from interrupt handler for errors or receive interrupt 441 * Returns number of CRC error packets, needed by some chips for 442 * local link integrity tracking. crcs are adjusted down by following 443 * good packets, if any, and count of good packets is also tracked. 444 */ 445 u32 qib_kreceive(struct qib_ctxtdata *rcd, u32 *llic, u32 *npkts) 446 { 447 struct qib_devdata *dd = rcd->dd; 448 struct qib_pportdata *ppd = rcd->ppd; 449 __le32 *rhf_addr; 450 void *ebuf; 451 const u32 rsize = dd->rcvhdrentsize; /* words */ 452 const u32 maxcnt = dd->rcvhdrcnt * rsize; /* words */ 453 u32 etail = -1, l, hdrqtail; 454 struct qib_message_header *hdr; 455 u32 eflags, etype, tlen, i = 0, updegr = 0, crcs = 0; 456 int last; 457 u64 lval; 458 struct qib_qp *qp, *nqp; 459 460 l = rcd->head; 461 rhf_addr = (__le32 *) rcd->rcvhdrq + l + dd->rhf_offset; 462 if (dd->flags & QIB_NODMA_RTAIL) { 463 u32 seq = qib_hdrget_seq(rhf_addr); 464 if (seq != rcd->seq_cnt) 465 goto bail; 466 hdrqtail = 0; 467 } else { 468 hdrqtail = qib_get_rcvhdrtail(rcd); 469 if (l == hdrqtail) 470 goto bail; 471 smp_rmb(); /* prevent speculative reads of dma'ed hdrq */ 472 } 473 474 for (last = 0, i = 1; !last; i += !last) { 475 hdr = dd->f_get_msgheader(dd, rhf_addr); 476 eflags = qib_hdrget_err_flags(rhf_addr); 477 etype = qib_hdrget_rcv_type(rhf_addr); 478 /* total length */ 479 tlen = qib_hdrget_length_in_bytes(rhf_addr); 480 ebuf = NULL; 481 if ((dd->flags & QIB_NODMA_RTAIL) ? 482 qib_hdrget_use_egr_buf(rhf_addr) : 483 (etype != RCVHQ_RCV_TYPE_EXPECTED)) { 484 etail = qib_hdrget_index(rhf_addr); 485 updegr = 1; 486 if (tlen > sizeof(*hdr) || 487 etype >= RCVHQ_RCV_TYPE_NON_KD) { 488 ebuf = qib_get_egrbuf(rcd, etail); 489 prefetch_range(ebuf, tlen - sizeof(*hdr)); 490 } 491 } 492 if (!eflags) { 493 u16 lrh_len = be16_to_cpu(hdr->lrh[2]) << 2; 494 495 if (lrh_len != tlen) { 496 qib_stats.sps_lenerrs++; 497 goto move_along; 498 } 499 } 500 if (etype == RCVHQ_RCV_TYPE_NON_KD && !eflags && 501 ebuf == NULL && 502 tlen > (dd->rcvhdrentsize - 2 + 1 - 503 qib_hdrget_offset(rhf_addr)) << 2) { 504 goto move_along; 505 } 506 507 /* 508 * Both tiderr and qibhdrerr are set for all plain IB 509 * packets; only qibhdrerr should be set. 510 */ 511 if (unlikely(eflags)) 512 crcs += qib_rcv_hdrerr(rcd, ppd, rcd->ctxt, eflags, l, 513 etail, rhf_addr, hdr); 514 else if (etype == RCVHQ_RCV_TYPE_NON_KD) { 515 qib_ib_rcv(rcd, hdr, ebuf, tlen); 516 if (crcs) 517 crcs--; 518 else if (llic && *llic) 519 --*llic; 520 } 521 move_along: 522 l += rsize; 523 if (l >= maxcnt) 524 l = 0; 525 if (i == QIB_MAX_PKT_RECV) 526 last = 1; 527 528 rhf_addr = (__le32 *) rcd->rcvhdrq + l + dd->rhf_offset; 529 if (dd->flags & QIB_NODMA_RTAIL) { 530 u32 seq = qib_hdrget_seq(rhf_addr); 531 532 if (++rcd->seq_cnt > 13) 533 rcd->seq_cnt = 1; 534 if (seq != rcd->seq_cnt) 535 last = 1; 536 } else if (l == hdrqtail) 537 last = 1; 538 /* 539 * Update head regs etc., every 16 packets, if not last pkt, 540 * to help prevent rcvhdrq overflows, when many packets 541 * are processed and queue is nearly full. 542 * Don't request an interrupt for intermediate updates. 543 */ 544 lval = l; 545 if (!last && !(i & 0xf)) { 546 dd->f_update_usrhead(rcd, lval, updegr, etail, i); 547 updegr = 0; 548 } 549 } 550 /* 551 * Notify qib_destroy_qp() if it is waiting 552 * for lookaside_qp to finish. 553 */ 554 if (rcd->lookaside_qp) { 555 if (atomic_dec_and_test(&rcd->lookaside_qp->refcount)) 556 wake_up(&rcd->lookaside_qp->wait); 557 rcd->lookaside_qp = NULL; 558 } 559 560 rcd->head = l; 561 562 /* 563 * Iterate over all QPs waiting to respond. 564 * The list won't change since the IRQ is only run on one CPU. 565 */ 566 list_for_each_entry_safe(qp, nqp, &rcd->qp_wait_list, rspwait) { 567 list_del_init(&qp->rspwait); 568 if (qp->r_flags & QIB_R_RSP_NAK) { 569 qp->r_flags &= ~QIB_R_RSP_NAK; 570 qib_send_rc_ack(qp); 571 } 572 if (qp->r_flags & QIB_R_RSP_SEND) { 573 unsigned long flags; 574 575 qp->r_flags &= ~QIB_R_RSP_SEND; 576 spin_lock_irqsave(&qp->s_lock, flags); 577 if (ib_qib_state_ops[qp->state] & 578 QIB_PROCESS_OR_FLUSH_SEND) 579 qib_schedule_send(qp); 580 spin_unlock_irqrestore(&qp->s_lock, flags); 581 } 582 if (atomic_dec_and_test(&qp->refcount)) 583 wake_up(&qp->wait); 584 } 585 586 bail: 587 /* Report number of packets consumed */ 588 if (npkts) 589 *npkts = i; 590 591 /* 592 * Always write head at end, and setup rcv interrupt, even 593 * if no packets were processed. 594 */ 595 lval = (u64)rcd->head | dd->rhdrhead_intr_off; 596 dd->f_update_usrhead(rcd, lval, updegr, etail, i); 597 return crcs; 598 } 599 600 /** 601 * qib_set_mtu - set the MTU 602 * @ppd: the perport data 603 * @arg: the new MTU 604 * 605 * We can handle "any" incoming size, the issue here is whether we 606 * need to restrict our outgoing size. For now, we don't do any 607 * sanity checking on this, and we don't deal with what happens to 608 * programs that are already running when the size changes. 609 * NOTE: changing the MTU will usually cause the IBC to go back to 610 * link INIT state... 611 */ 612 int qib_set_mtu(struct qib_pportdata *ppd, u16 arg) 613 { 614 u32 piosize; 615 int ret, chk; 616 617 if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 && 618 arg != 4096) { 619 ret = -EINVAL; 620 goto bail; 621 } 622 chk = ib_mtu_enum_to_int(qib_ibmtu); 623 if (chk > 0 && arg > chk) { 624 ret = -EINVAL; 625 goto bail; 626 } 627 628 piosize = ppd->ibmaxlen; 629 ppd->ibmtu = arg; 630 631 if (arg >= (piosize - QIB_PIO_MAXIBHDR)) { 632 /* Only if it's not the initial value (or reset to it) */ 633 if (piosize != ppd->init_ibmaxlen) { 634 if (arg > piosize && arg <= ppd->init_ibmaxlen) 635 piosize = ppd->init_ibmaxlen - 2 * sizeof(u32); 636 ppd->ibmaxlen = piosize; 637 } 638 } else if ((arg + QIB_PIO_MAXIBHDR) != ppd->ibmaxlen) { 639 piosize = arg + QIB_PIO_MAXIBHDR - 2 * sizeof(u32); 640 ppd->ibmaxlen = piosize; 641 } 642 643 ppd->dd->f_set_ib_cfg(ppd, QIB_IB_CFG_MTU, 0); 644 645 ret = 0; 646 647 bail: 648 return ret; 649 } 650 651 int qib_set_lid(struct qib_pportdata *ppd, u32 lid, u8 lmc) 652 { 653 struct qib_devdata *dd = ppd->dd; 654 ppd->lid = lid; 655 ppd->lmc = lmc; 656 657 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LIDLMC, 658 lid | (~((1U << lmc) - 1)) << 16); 659 660 qib_devinfo(dd->pcidev, "IB%u:%u got a lid: 0x%x\n", 661 dd->unit, ppd->port, lid); 662 663 return 0; 664 } 665 666 /* 667 * Following deal with the "obviously simple" task of overriding the state 668 * of the LEDS, which normally indicate link physical and logical status. 669 * The complications arise in dealing with different hardware mappings 670 * and the board-dependent routine being called from interrupts. 671 * and then there's the requirement to _flash_ them. 672 */ 673 #define LED_OVER_FREQ_SHIFT 8 674 #define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT) 675 /* Below is "non-zero" to force override, but both actual LEDs are off */ 676 #define LED_OVER_BOTH_OFF (8) 677 678 static void qib_run_led_override(unsigned long opaque) 679 { 680 struct qib_pportdata *ppd = (struct qib_pportdata *)opaque; 681 struct qib_devdata *dd = ppd->dd; 682 int timeoff; 683 int ph_idx; 684 685 if (!(dd->flags & QIB_INITTED)) 686 return; 687 688 ph_idx = ppd->led_override_phase++ & 1; 689 ppd->led_override = ppd->led_override_vals[ph_idx]; 690 timeoff = ppd->led_override_timeoff; 691 692 dd->f_setextled(ppd, 1); 693 /* 694 * don't re-fire the timer if user asked for it to be off; we let 695 * it fire one more time after they turn it off to simplify 696 */ 697 if (ppd->led_override_vals[0] || ppd->led_override_vals[1]) 698 mod_timer(&ppd->led_override_timer, jiffies + timeoff); 699 } 700 701 void qib_set_led_override(struct qib_pportdata *ppd, unsigned int val) 702 { 703 struct qib_devdata *dd = ppd->dd; 704 int timeoff, freq; 705 706 if (!(dd->flags & QIB_INITTED)) 707 return; 708 709 /* First check if we are blinking. If not, use 1HZ polling */ 710 timeoff = HZ; 711 freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT; 712 713 if (freq) { 714 /* For blink, set each phase from one nybble of val */ 715 ppd->led_override_vals[0] = val & 0xF; 716 ppd->led_override_vals[1] = (val >> 4) & 0xF; 717 timeoff = (HZ << 4)/freq; 718 } else { 719 /* Non-blink set both phases the same. */ 720 ppd->led_override_vals[0] = val & 0xF; 721 ppd->led_override_vals[1] = val & 0xF; 722 } 723 ppd->led_override_timeoff = timeoff; 724 725 /* 726 * If the timer has not already been started, do so. Use a "quick" 727 * timeout so the function will be called soon, to look at our request. 728 */ 729 if (atomic_inc_return(&ppd->led_override_timer_active) == 1) { 730 /* Need to start timer */ 731 init_timer(&ppd->led_override_timer); 732 ppd->led_override_timer.function = qib_run_led_override; 733 ppd->led_override_timer.data = (unsigned long) ppd; 734 ppd->led_override_timer.expires = jiffies + 1; 735 add_timer(&ppd->led_override_timer); 736 } else { 737 if (ppd->led_override_vals[0] || ppd->led_override_vals[1]) 738 mod_timer(&ppd->led_override_timer, jiffies + 1); 739 atomic_dec(&ppd->led_override_timer_active); 740 } 741 } 742 743 /** 744 * qib_reset_device - reset the chip if possible 745 * @unit: the device to reset 746 * 747 * Whether or not reset is successful, we attempt to re-initialize the chip 748 * (that is, much like a driver unload/reload). We clear the INITTED flag 749 * so that the various entry points will fail until we reinitialize. For 750 * now, we only allow this if no user contexts are open that use chip resources 751 */ 752 int qib_reset_device(int unit) 753 { 754 int ret, i; 755 struct qib_devdata *dd = qib_lookup(unit); 756 struct qib_pportdata *ppd; 757 unsigned long flags; 758 int pidx; 759 760 if (!dd) { 761 ret = -ENODEV; 762 goto bail; 763 } 764 765 qib_devinfo(dd->pcidev, "Reset on unit %u requested\n", unit); 766 767 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) { 768 qib_devinfo(dd->pcidev, 769 "Invalid unit number %u or not initialized or not present\n", 770 unit); 771 ret = -ENXIO; 772 goto bail; 773 } 774 775 spin_lock_irqsave(&dd->uctxt_lock, flags); 776 if (dd->rcd) 777 for (i = dd->first_user_ctxt; i < dd->cfgctxts; i++) { 778 if (!dd->rcd[i] || !dd->rcd[i]->cnt) 779 continue; 780 spin_unlock_irqrestore(&dd->uctxt_lock, flags); 781 ret = -EBUSY; 782 goto bail; 783 } 784 spin_unlock_irqrestore(&dd->uctxt_lock, flags); 785 786 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 787 ppd = dd->pport + pidx; 788 if (atomic_read(&ppd->led_override_timer_active)) { 789 /* Need to stop LED timer, _then_ shut off LEDs */ 790 del_timer_sync(&ppd->led_override_timer); 791 atomic_set(&ppd->led_override_timer_active, 0); 792 } 793 794 /* Shut off LEDs after we are sure timer is not running */ 795 ppd->led_override = LED_OVER_BOTH_OFF; 796 dd->f_setextled(ppd, 0); 797 if (dd->flags & QIB_HAS_SEND_DMA) 798 qib_teardown_sdma(ppd); 799 } 800 801 ret = dd->f_reset(dd); 802 if (ret == 1) 803 ret = qib_init(dd, 1); 804 else 805 ret = -EAGAIN; 806 if (ret) 807 qib_dev_err(dd, 808 "Reinitialize unit %u after reset failed with %d\n", 809 unit, ret); 810 else 811 qib_devinfo(dd->pcidev, 812 "Reinitialized unit %u after resetting\n", 813 unit); 814 815 bail: 816 return ret; 817 } 818