1 #ifndef _HFI1_SDMA_H 2 #define _HFI1_SDMA_H 3 /* 4 * Copyright(c) 2015, 2016 Intel Corporation. 5 * 6 * This file is provided under a dual BSD/GPLv2 license. When using or 7 * redistributing this file, you may do so under either license. 8 * 9 * GPL LICENSE SUMMARY 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of version 2 of the GNU General Public License as 13 * published by the Free Software Foundation. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * BSD LICENSE 21 * 22 * Redistribution and use in source and binary forms, with or without 23 * modification, are permitted provided that the following conditions 24 * are met: 25 * 26 * - Redistributions of source code must retain the above copyright 27 * notice, this list of conditions and the following disclaimer. 28 * - Redistributions in binary form must reproduce the above copyright 29 * notice, this list of conditions and the following disclaimer in 30 * the documentation and/or other materials provided with the 31 * distribution. 32 * - Neither the name of Intel Corporation nor the names of its 33 * contributors may be used to endorse or promote products derived 34 * from this software without specific prior written permission. 35 * 36 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 37 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 38 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 39 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 40 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 41 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 42 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 43 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 44 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 45 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 46 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 47 * 48 */ 49 50 #include <linux/types.h> 51 #include <linux/list.h> 52 #include <asm/byteorder.h> 53 #include <linux/workqueue.h> 54 #include <linux/rculist.h> 55 56 #include "hfi.h" 57 #include "verbs.h" 58 #include "sdma_txreq.h" 59 60 /* Hardware limit */ 61 #define MAX_DESC 64 62 /* Hardware limit for SDMA packet size */ 63 #define MAX_SDMA_PKT_SIZE ((16 * 1024) - 1) 64 65 #define SDMA_TXREQ_S_OK 0 66 #define SDMA_TXREQ_S_SENDERROR 1 67 #define SDMA_TXREQ_S_ABORTED 2 68 #define SDMA_TXREQ_S_SHUTDOWN 3 69 70 /* flags bits */ 71 #define SDMA_TXREQ_F_URGENT 0x0001 72 #define SDMA_TXREQ_F_AHG_COPY 0x0002 73 #define SDMA_TXREQ_F_USE_AHG 0x0004 74 75 #define SDMA_MAP_NONE 0 76 #define SDMA_MAP_SINGLE 1 77 #define SDMA_MAP_PAGE 2 78 79 #define SDMA_AHG_VALUE_MASK 0xffff 80 #define SDMA_AHG_VALUE_SHIFT 0 81 #define SDMA_AHG_INDEX_MASK 0xf 82 #define SDMA_AHG_INDEX_SHIFT 16 83 #define SDMA_AHG_FIELD_LEN_MASK 0xf 84 #define SDMA_AHG_FIELD_LEN_SHIFT 20 85 #define SDMA_AHG_FIELD_START_MASK 0x1f 86 #define SDMA_AHG_FIELD_START_SHIFT 24 87 #define SDMA_AHG_UPDATE_ENABLE_MASK 0x1 88 #define SDMA_AHG_UPDATE_ENABLE_SHIFT 31 89 90 /* AHG modes */ 91 92 /* 93 * Be aware the ordering and values 94 * for SDMA_AHG_APPLY_UPDATE[123] 95 * are assumed in generating a skip 96 * count in submit_tx() in sdma.c 97 */ 98 #define SDMA_AHG_NO_AHG 0 99 #define SDMA_AHG_COPY 1 100 #define SDMA_AHG_APPLY_UPDATE1 2 101 #define SDMA_AHG_APPLY_UPDATE2 3 102 #define SDMA_AHG_APPLY_UPDATE3 4 103 104 /* 105 * Bits defined in the send DMA descriptor. 106 */ 107 #define SDMA_DESC0_FIRST_DESC_FLAG BIT_ULL(63) 108 #define SDMA_DESC0_LAST_DESC_FLAG BIT_ULL(62) 109 #define SDMA_DESC0_BYTE_COUNT_SHIFT 48 110 #define SDMA_DESC0_BYTE_COUNT_WIDTH 14 111 #define SDMA_DESC0_BYTE_COUNT_MASK \ 112 ((1ULL << SDMA_DESC0_BYTE_COUNT_WIDTH) - 1) 113 #define SDMA_DESC0_BYTE_COUNT_SMASK \ 114 (SDMA_DESC0_BYTE_COUNT_MASK << SDMA_DESC0_BYTE_COUNT_SHIFT) 115 #define SDMA_DESC0_PHY_ADDR_SHIFT 0 116 #define SDMA_DESC0_PHY_ADDR_WIDTH 48 117 #define SDMA_DESC0_PHY_ADDR_MASK \ 118 ((1ULL << SDMA_DESC0_PHY_ADDR_WIDTH) - 1) 119 #define SDMA_DESC0_PHY_ADDR_SMASK \ 120 (SDMA_DESC0_PHY_ADDR_MASK << SDMA_DESC0_PHY_ADDR_SHIFT) 121 122 #define SDMA_DESC1_HEADER_UPDATE1_SHIFT 32 123 #define SDMA_DESC1_HEADER_UPDATE1_WIDTH 32 124 #define SDMA_DESC1_HEADER_UPDATE1_MASK \ 125 ((1ULL << SDMA_DESC1_HEADER_UPDATE1_WIDTH) - 1) 126 #define SDMA_DESC1_HEADER_UPDATE1_SMASK \ 127 (SDMA_DESC1_HEADER_UPDATE1_MASK << SDMA_DESC1_HEADER_UPDATE1_SHIFT) 128 #define SDMA_DESC1_HEADER_MODE_SHIFT 13 129 #define SDMA_DESC1_HEADER_MODE_WIDTH 3 130 #define SDMA_DESC1_HEADER_MODE_MASK \ 131 ((1ULL << SDMA_DESC1_HEADER_MODE_WIDTH) - 1) 132 #define SDMA_DESC1_HEADER_MODE_SMASK \ 133 (SDMA_DESC1_HEADER_MODE_MASK << SDMA_DESC1_HEADER_MODE_SHIFT) 134 #define SDMA_DESC1_HEADER_INDEX_SHIFT 8 135 #define SDMA_DESC1_HEADER_INDEX_WIDTH 5 136 #define SDMA_DESC1_HEADER_INDEX_MASK \ 137 ((1ULL << SDMA_DESC1_HEADER_INDEX_WIDTH) - 1) 138 #define SDMA_DESC1_HEADER_INDEX_SMASK \ 139 (SDMA_DESC1_HEADER_INDEX_MASK << SDMA_DESC1_HEADER_INDEX_SHIFT) 140 #define SDMA_DESC1_HEADER_DWS_SHIFT 4 141 #define SDMA_DESC1_HEADER_DWS_WIDTH 4 142 #define SDMA_DESC1_HEADER_DWS_MASK \ 143 ((1ULL << SDMA_DESC1_HEADER_DWS_WIDTH) - 1) 144 #define SDMA_DESC1_HEADER_DWS_SMASK \ 145 (SDMA_DESC1_HEADER_DWS_MASK << SDMA_DESC1_HEADER_DWS_SHIFT) 146 #define SDMA_DESC1_GENERATION_SHIFT 2 147 #define SDMA_DESC1_GENERATION_WIDTH 2 148 #define SDMA_DESC1_GENERATION_MASK \ 149 ((1ULL << SDMA_DESC1_GENERATION_WIDTH) - 1) 150 #define SDMA_DESC1_GENERATION_SMASK \ 151 (SDMA_DESC1_GENERATION_MASK << SDMA_DESC1_GENERATION_SHIFT) 152 #define SDMA_DESC1_INT_REQ_FLAG BIT_ULL(1) 153 #define SDMA_DESC1_HEAD_TO_HOST_FLAG BIT_ULL(0) 154 155 enum sdma_states { 156 sdma_state_s00_hw_down, 157 sdma_state_s10_hw_start_up_halt_wait, 158 sdma_state_s15_hw_start_up_clean_wait, 159 sdma_state_s20_idle, 160 sdma_state_s30_sw_clean_up_wait, 161 sdma_state_s40_hw_clean_up_wait, 162 sdma_state_s50_hw_halt_wait, 163 sdma_state_s60_idle_halt_wait, 164 sdma_state_s80_hw_freeze, 165 sdma_state_s82_freeze_sw_clean, 166 sdma_state_s99_running, 167 }; 168 169 enum sdma_events { 170 sdma_event_e00_go_hw_down, 171 sdma_event_e10_go_hw_start, 172 sdma_event_e15_hw_halt_done, 173 sdma_event_e25_hw_clean_up_done, 174 sdma_event_e30_go_running, 175 sdma_event_e40_sw_cleaned, 176 sdma_event_e50_hw_cleaned, 177 sdma_event_e60_hw_halted, 178 sdma_event_e70_go_idle, 179 sdma_event_e80_hw_freeze, 180 sdma_event_e81_hw_frozen, 181 sdma_event_e82_hw_unfreeze, 182 sdma_event_e85_link_down, 183 sdma_event_e90_sw_halted, 184 }; 185 186 struct sdma_set_state_action { 187 unsigned op_enable:1; 188 unsigned op_intenable:1; 189 unsigned op_halt:1; 190 unsigned op_cleanup:1; 191 unsigned go_s99_running_tofalse:1; 192 unsigned go_s99_running_totrue:1; 193 }; 194 195 struct sdma_state { 196 struct kref kref; 197 struct completion comp; 198 enum sdma_states current_state; 199 unsigned current_op; 200 unsigned go_s99_running; 201 /* debugging/development */ 202 enum sdma_states previous_state; 203 unsigned previous_op; 204 enum sdma_events last_event; 205 }; 206 207 /** 208 * DOC: sdma exported routines 209 * 210 * These sdma routines fit into three categories: 211 * - The SDMA API for building and submitting packets 212 * to the ring 213 * 214 * - Initialization and tear down routines to buildup 215 * and tear down SDMA 216 * 217 * - ISR entrances to handle interrupts, state changes 218 * and errors 219 */ 220 221 /** 222 * DOC: sdma PSM/verbs API 223 * 224 * The sdma API is designed to be used by both PSM 225 * and verbs to supply packets to the SDMA ring. 226 * 227 * The usage of the API is as follows: 228 * 229 * Embed a struct iowait in the QP or 230 * PQ. The iowait should be initialized with a 231 * call to iowait_init(). 232 * 233 * The user of the API should create an allocation method 234 * for their version of the txreq. slabs, pre-allocated lists, 235 * and dma pools can be used. Once the user's overload of 236 * the sdma_txreq has been allocated, the sdma_txreq member 237 * must be initialized with sdma_txinit() or sdma_txinit_ahg(). 238 * 239 * The txreq must be declared with the sdma_txreq first. 240 * 241 * The tx request, once initialized, is manipulated with calls to 242 * sdma_txadd_daddr(), sdma_txadd_page(), or sdma_txadd_kvaddr() 243 * for each disjoint memory location. It is the user's responsibility 244 * to understand the packet boundaries and page boundaries to do the 245 * appropriate number of sdma_txadd_* calls.. The user 246 * must be prepared to deal with failures from these routines due to 247 * either memory allocation or dma_mapping failures. 248 * 249 * The mapping specifics for each memory location are recorded 250 * in the tx. Memory locations added with sdma_txadd_page() 251 * and sdma_txadd_kvaddr() are automatically mapped when added 252 * to the tx and nmapped as part of the progress processing in the 253 * SDMA interrupt handling. 254 * 255 * sdma_txadd_daddr() is used to add an dma_addr_t memory to the 256 * tx. An example of a use case would be a pre-allocated 257 * set of headers allocated via dma_pool_alloc() or 258 * dma_alloc_coherent(). For these memory locations, it 259 * is the responsibility of the user to handle that unmapping. 260 * (This would usually be at an unload or job termination.) 261 * 262 * The routine sdma_send_txreq() is used to submit 263 * a tx to the ring after the appropriate number of 264 * sdma_txadd_* have been done. 265 * 266 * If it is desired to send a burst of sdma_txreqs, sdma_send_txlist() 267 * can be used to submit a list of packets. 268 * 269 * The user is free to use the link overhead in the struct sdma_txreq as 270 * long as the tx isn't in flight. 271 * 272 * The extreme degenerate case of the number of descriptors 273 * exceeding the ring size is automatically handled as 274 * memory locations are added. An overflow of the descriptor 275 * array that is part of the sdma_txreq is also automatically 276 * handled. 277 * 278 */ 279 280 /** 281 * DOC: Infrastructure calls 282 * 283 * sdma_init() is used to initialize data structures and 284 * CSRs for the desired number of SDMA engines. 285 * 286 * sdma_start() is used to kick the SDMA engines initialized 287 * with sdma_init(). Interrupts must be enabled at this 288 * point since aspects of the state machine are interrupt 289 * driven. 290 * 291 * sdma_engine_error() and sdma_engine_interrupt() are 292 * entrances for interrupts. 293 * 294 * sdma_map_init() is for the management of the mapping 295 * table when the number of vls is changed. 296 * 297 */ 298 299 /* 300 * struct hw_sdma_desc - raw 128 bit SDMA descriptor 301 * 302 * This is the raw descriptor in the SDMA ring 303 */ 304 struct hw_sdma_desc { 305 /* private: don't use directly */ 306 __le64 qw[2]; 307 }; 308 309 /** 310 * struct sdma_engine - Data pertaining to each SDMA engine. 311 * @dd: a back-pointer to the device data 312 * @ppd: per port back-pointer 313 * @imask: mask for irq manipulation 314 * @idle_mask: mask for determining if an interrupt is due to sdma_idle 315 * 316 * This structure has the state for each sdma_engine. 317 * 318 * Accessing to non public fields are not supported 319 * since the private members are subject to change. 320 */ 321 struct sdma_engine { 322 /* read mostly */ 323 struct hfi1_devdata *dd; 324 struct hfi1_pportdata *ppd; 325 /* private: */ 326 void __iomem *tail_csr; 327 u64 imask; /* clear interrupt mask */ 328 u64 idle_mask; 329 u64 progress_mask; 330 u64 int_mask; 331 /* private: */ 332 volatile __le64 *head_dma; /* DMA'ed by chip */ 333 /* private: */ 334 dma_addr_t head_phys; 335 /* private: */ 336 struct hw_sdma_desc *descq; 337 /* private: */ 338 unsigned descq_full_count; 339 struct sdma_txreq **tx_ring; 340 /* private: */ 341 dma_addr_t descq_phys; 342 /* private */ 343 u32 sdma_mask; 344 /* private */ 345 struct sdma_state state; 346 /* private */ 347 int cpu; 348 /* private: */ 349 u8 sdma_shift; 350 /* private: */ 351 u8 this_idx; /* zero relative engine */ 352 /* protect changes to senddmactrl shadow */ 353 spinlock_t senddmactrl_lock; 354 /* private: */ 355 u64 p_senddmactrl; /* shadow per-engine SendDmaCtrl */ 356 357 /* read/write using tail_lock */ 358 spinlock_t tail_lock ____cacheline_aligned_in_smp; 359 #ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER 360 /* private: */ 361 u64 tail_sn; 362 #endif 363 /* private: */ 364 u32 descq_tail; 365 /* private: */ 366 unsigned long ahg_bits; 367 /* private: */ 368 u16 desc_avail; 369 /* private: */ 370 u16 tx_tail; 371 /* private: */ 372 u16 descq_cnt; 373 374 /* read/write using head_lock */ 375 /* private: */ 376 seqlock_t head_lock ____cacheline_aligned_in_smp; 377 #ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER 378 /* private: */ 379 u64 head_sn; 380 #endif 381 /* private: */ 382 u32 descq_head; 383 /* private: */ 384 u16 tx_head; 385 /* private: */ 386 u64 last_status; 387 /* private */ 388 u64 err_cnt; 389 /* private */ 390 u64 sdma_int_cnt; 391 u64 idle_int_cnt; 392 u64 progress_int_cnt; 393 394 /* private: */ 395 struct list_head dmawait; 396 397 /* CONFIG SDMA for now, just blindly duplicate */ 398 /* private: */ 399 struct tasklet_struct sdma_hw_clean_up_task 400 ____cacheline_aligned_in_smp; 401 402 /* private: */ 403 struct tasklet_struct sdma_sw_clean_up_task 404 ____cacheline_aligned_in_smp; 405 /* private: */ 406 struct work_struct err_halt_worker; 407 /* private */ 408 struct timer_list err_progress_check_timer; 409 u32 progress_check_head; 410 /* private: */ 411 struct work_struct flush_worker; 412 /* protect flush list */ 413 spinlock_t flushlist_lock; 414 /* private: */ 415 struct list_head flushlist; 416 struct cpumask cpu_mask; 417 struct kobject kobj; 418 }; 419 420 int sdma_init(struct hfi1_devdata *dd, u8 port); 421 void sdma_start(struct hfi1_devdata *dd); 422 void sdma_exit(struct hfi1_devdata *dd); 423 void sdma_all_running(struct hfi1_devdata *dd); 424 void sdma_all_idle(struct hfi1_devdata *dd); 425 void sdma_freeze_notify(struct hfi1_devdata *dd, int go_idle); 426 void sdma_freeze(struct hfi1_devdata *dd); 427 void sdma_unfreeze(struct hfi1_devdata *dd); 428 void sdma_wait(struct hfi1_devdata *dd); 429 430 /** 431 * sdma_empty() - idle engine test 432 * @engine: sdma engine 433 * 434 * Currently used by verbs as a latency optimization. 435 * 436 * Return: 437 * 1 - empty, 0 - non-empty 438 */ 439 static inline int sdma_empty(struct sdma_engine *sde) 440 { 441 return sde->descq_tail == sde->descq_head; 442 } 443 444 static inline u16 sdma_descq_freecnt(struct sdma_engine *sde) 445 { 446 return sde->descq_cnt - 447 (sde->descq_tail - 448 ACCESS_ONCE(sde->descq_head)) - 1; 449 } 450 451 static inline u16 sdma_descq_inprocess(struct sdma_engine *sde) 452 { 453 return sde->descq_cnt - sdma_descq_freecnt(sde); 454 } 455 456 /* 457 * Either head_lock or tail lock required to see 458 * a steady state. 459 */ 460 static inline int __sdma_running(struct sdma_engine *engine) 461 { 462 return engine->state.current_state == sdma_state_s99_running; 463 } 464 465 /** 466 * sdma_running() - state suitability test 467 * @engine: sdma engine 468 * 469 * sdma_running probes the internal state to determine if it is suitable 470 * for submitting packets. 471 * 472 * Return: 473 * 1 - ok to submit, 0 - not ok to submit 474 * 475 */ 476 static inline int sdma_running(struct sdma_engine *engine) 477 { 478 unsigned long flags; 479 int ret; 480 481 spin_lock_irqsave(&engine->tail_lock, flags); 482 ret = __sdma_running(engine); 483 spin_unlock_irqrestore(&engine->tail_lock, flags); 484 return ret; 485 } 486 487 void _sdma_txreq_ahgadd( 488 struct sdma_txreq *tx, 489 u8 num_ahg, 490 u8 ahg_entry, 491 u32 *ahg, 492 u8 ahg_hlen); 493 494 /** 495 * sdma_txinit_ahg() - initialize an sdma_txreq struct with AHG 496 * @tx: tx request to initialize 497 * @flags: flags to key last descriptor additions 498 * @tlen: total packet length (pbc + headers + data) 499 * @ahg_entry: ahg entry to use (0 - 31) 500 * @num_ahg: ahg descriptor for first descriptor (0 - 9) 501 * @ahg: array of AHG descriptors (up to 9 entries) 502 * @ahg_hlen: number of bytes from ASIC entry to use 503 * @cb: callback 504 * 505 * The allocation of the sdma_txreq and it enclosing structure is user 506 * dependent. This routine must be called to initialize the user independent 507 * fields. 508 * 509 * The currently supported flags are SDMA_TXREQ_F_URGENT, 510 * SDMA_TXREQ_F_AHG_COPY, and SDMA_TXREQ_F_USE_AHG. 511 * 512 * SDMA_TXREQ_F_URGENT is used for latency sensitive situations where the 513 * completion is desired as soon as possible. 514 * 515 * SDMA_TXREQ_F_AHG_COPY causes the header in the first descriptor to be 516 * copied to chip entry. SDMA_TXREQ_F_USE_AHG causes the code to add in 517 * the AHG descriptors into the first 1 to 3 descriptors. 518 * 519 * Completions of submitted requests can be gotten on selected 520 * txreqs by giving a completion routine callback to sdma_txinit() or 521 * sdma_txinit_ahg(). The environment in which the callback runs 522 * can be from an ISR, a tasklet, or a thread, so no sleeping 523 * kernel routines can be used. Aspects of the sdma ring may 524 * be locked so care should be taken with locking. 525 * 526 * The callback pointer can be NULL to avoid any callback for the packet 527 * being submitted. The callback will be provided this tx, a status, and a flag. 528 * 529 * The status will be one of SDMA_TXREQ_S_OK, SDMA_TXREQ_S_SENDERROR, 530 * SDMA_TXREQ_S_ABORTED, or SDMA_TXREQ_S_SHUTDOWN. 531 * 532 * The flag, if the is the iowait had been used, indicates the iowait 533 * sdma_busy count has reached zero. 534 * 535 * user data portion of tlen should be precise. The sdma_txadd_* entrances 536 * will pad with a descriptor references 1 - 3 bytes when the number of bytes 537 * specified in tlen have been supplied to the sdma_txreq. 538 * 539 * ahg_hlen is used to determine the number of on-chip entry bytes to 540 * use as the header. This is for cases where the stored header is 541 * larger than the header to be used in a packet. This is typical 542 * for verbs where an RDMA_WRITE_FIRST is larger than the packet in 543 * and RDMA_WRITE_MIDDLE. 544 * 545 */ 546 static inline int sdma_txinit_ahg( 547 struct sdma_txreq *tx, 548 u16 flags, 549 u16 tlen, 550 u8 ahg_entry, 551 u8 num_ahg, 552 u32 *ahg, 553 u8 ahg_hlen, 554 void (*cb)(struct sdma_txreq *, int)) 555 { 556 if (tlen == 0) 557 return -ENODATA; 558 if (tlen > MAX_SDMA_PKT_SIZE) 559 return -EMSGSIZE; 560 tx->desc_limit = ARRAY_SIZE(tx->descs); 561 tx->descp = &tx->descs[0]; 562 INIT_LIST_HEAD(&tx->list); 563 tx->num_desc = 0; 564 tx->flags = flags; 565 tx->complete = cb; 566 tx->coalesce_buf = NULL; 567 tx->wait = NULL; 568 tx->packet_len = tlen; 569 tx->tlen = tx->packet_len; 570 tx->descs[0].qw[0] = SDMA_DESC0_FIRST_DESC_FLAG; 571 tx->descs[0].qw[1] = 0; 572 if (flags & SDMA_TXREQ_F_AHG_COPY) 573 tx->descs[0].qw[1] |= 574 (((u64)ahg_entry & SDMA_DESC1_HEADER_INDEX_MASK) 575 << SDMA_DESC1_HEADER_INDEX_SHIFT) | 576 (((u64)SDMA_AHG_COPY & SDMA_DESC1_HEADER_MODE_MASK) 577 << SDMA_DESC1_HEADER_MODE_SHIFT); 578 else if (flags & SDMA_TXREQ_F_USE_AHG && num_ahg) 579 _sdma_txreq_ahgadd(tx, num_ahg, ahg_entry, ahg, ahg_hlen); 580 return 0; 581 } 582 583 /** 584 * sdma_txinit() - initialize an sdma_txreq struct (no AHG) 585 * @tx: tx request to initialize 586 * @flags: flags to key last descriptor additions 587 * @tlen: total packet length (pbc + headers + data) 588 * @cb: callback pointer 589 * 590 * The allocation of the sdma_txreq and it enclosing structure is user 591 * dependent. This routine must be called to initialize the user 592 * independent fields. 593 * 594 * The currently supported flags is SDMA_TXREQ_F_URGENT. 595 * 596 * SDMA_TXREQ_F_URGENT is used for latency sensitive situations where the 597 * completion is desired as soon as possible. 598 * 599 * Completions of submitted requests can be gotten on selected 600 * txreqs by giving a completion routine callback to sdma_txinit() or 601 * sdma_txinit_ahg(). The environment in which the callback runs 602 * can be from an ISR, a tasklet, or a thread, so no sleeping 603 * kernel routines can be used. The head size of the sdma ring may 604 * be locked so care should be taken with locking. 605 * 606 * The callback pointer can be NULL to avoid any callback for the packet 607 * being submitted. 608 * 609 * The callback, if non-NULL, will be provided this tx and a status. The 610 * status will be one of SDMA_TXREQ_S_OK, SDMA_TXREQ_S_SENDERROR, 611 * SDMA_TXREQ_S_ABORTED, or SDMA_TXREQ_S_SHUTDOWN. 612 * 613 */ 614 static inline int sdma_txinit( 615 struct sdma_txreq *tx, 616 u16 flags, 617 u16 tlen, 618 void (*cb)(struct sdma_txreq *, int)) 619 { 620 return sdma_txinit_ahg(tx, flags, tlen, 0, 0, NULL, 0, cb); 621 } 622 623 /* helpers - don't use */ 624 static inline int sdma_mapping_type(struct sdma_desc *d) 625 { 626 return (d->qw[1] & SDMA_DESC1_GENERATION_SMASK) 627 >> SDMA_DESC1_GENERATION_SHIFT; 628 } 629 630 static inline size_t sdma_mapping_len(struct sdma_desc *d) 631 { 632 return (d->qw[0] & SDMA_DESC0_BYTE_COUNT_SMASK) 633 >> SDMA_DESC0_BYTE_COUNT_SHIFT; 634 } 635 636 static inline dma_addr_t sdma_mapping_addr(struct sdma_desc *d) 637 { 638 return (d->qw[0] & SDMA_DESC0_PHY_ADDR_SMASK) 639 >> SDMA_DESC0_PHY_ADDR_SHIFT; 640 } 641 642 static inline void make_tx_sdma_desc( 643 struct sdma_txreq *tx, 644 int type, 645 dma_addr_t addr, 646 size_t len) 647 { 648 struct sdma_desc *desc = &tx->descp[tx->num_desc]; 649 650 if (!tx->num_desc) { 651 /* qw[0] zero; qw[1] first, ahg mode already in from init */ 652 desc->qw[1] |= ((u64)type & SDMA_DESC1_GENERATION_MASK) 653 << SDMA_DESC1_GENERATION_SHIFT; 654 } else { 655 desc->qw[0] = 0; 656 desc->qw[1] = ((u64)type & SDMA_DESC1_GENERATION_MASK) 657 << SDMA_DESC1_GENERATION_SHIFT; 658 } 659 desc->qw[0] |= (((u64)addr & SDMA_DESC0_PHY_ADDR_MASK) 660 << SDMA_DESC0_PHY_ADDR_SHIFT) | 661 (((u64)len & SDMA_DESC0_BYTE_COUNT_MASK) 662 << SDMA_DESC0_BYTE_COUNT_SHIFT); 663 } 664 665 /* helper to extend txreq */ 666 int ext_coal_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx, 667 int type, void *kvaddr, struct page *page, 668 unsigned long offset, u16 len); 669 int _pad_sdma_tx_descs(struct hfi1_devdata *, struct sdma_txreq *); 670 void __sdma_txclean(struct hfi1_devdata *, struct sdma_txreq *); 671 672 static inline void sdma_txclean(struct hfi1_devdata *dd, struct sdma_txreq *tx) 673 { 674 if (tx->num_desc) 675 __sdma_txclean(dd, tx); 676 } 677 678 /* helpers used by public routines */ 679 static inline void _sdma_close_tx(struct hfi1_devdata *dd, 680 struct sdma_txreq *tx) 681 { 682 tx->descp[tx->num_desc].qw[0] |= 683 SDMA_DESC0_LAST_DESC_FLAG; 684 tx->descp[tx->num_desc].qw[1] |= 685 dd->default_desc1; 686 if (tx->flags & SDMA_TXREQ_F_URGENT) 687 tx->descp[tx->num_desc].qw[1] |= 688 (SDMA_DESC1_HEAD_TO_HOST_FLAG | 689 SDMA_DESC1_INT_REQ_FLAG); 690 } 691 692 static inline int _sdma_txadd_daddr( 693 struct hfi1_devdata *dd, 694 int type, 695 struct sdma_txreq *tx, 696 dma_addr_t addr, 697 u16 len) 698 { 699 int rval = 0; 700 701 make_tx_sdma_desc( 702 tx, 703 type, 704 addr, len); 705 WARN_ON(len > tx->tlen); 706 tx->tlen -= len; 707 /* special cases for last */ 708 if (!tx->tlen) { 709 if (tx->packet_len & (sizeof(u32) - 1)) { 710 rval = _pad_sdma_tx_descs(dd, tx); 711 if (rval) 712 return rval; 713 } else { 714 _sdma_close_tx(dd, tx); 715 } 716 } 717 tx->num_desc++; 718 return rval; 719 } 720 721 /** 722 * sdma_txadd_page() - add a page to the sdma_txreq 723 * @dd: the device to use for mapping 724 * @tx: tx request to which the page is added 725 * @page: page to map 726 * @offset: offset within the page 727 * @len: length in bytes 728 * 729 * This is used to add a page/offset/length descriptor. 730 * 731 * The mapping/unmapping of the page/offset/len is automatically handled. 732 * 733 * Return: 734 * 0 - success, -ENOSPC - mapping fail, -ENOMEM - couldn't 735 * extend/coalesce descriptor array 736 */ 737 static inline int sdma_txadd_page( 738 struct hfi1_devdata *dd, 739 struct sdma_txreq *tx, 740 struct page *page, 741 unsigned long offset, 742 u16 len) 743 { 744 dma_addr_t addr; 745 int rval; 746 747 if ((unlikely(tx->num_desc == tx->desc_limit))) { 748 rval = ext_coal_sdma_tx_descs(dd, tx, SDMA_MAP_PAGE, 749 NULL, page, offset, len); 750 if (rval <= 0) 751 return rval; 752 } 753 754 addr = dma_map_page( 755 &dd->pcidev->dev, 756 page, 757 offset, 758 len, 759 DMA_TO_DEVICE); 760 761 if (unlikely(dma_mapping_error(&dd->pcidev->dev, addr))) { 762 __sdma_txclean(dd, tx); 763 return -ENOSPC; 764 } 765 766 return _sdma_txadd_daddr( 767 dd, SDMA_MAP_PAGE, tx, addr, len); 768 } 769 770 /** 771 * sdma_txadd_daddr() - add a dma address to the sdma_txreq 772 * @dd: the device to use for mapping 773 * @tx: sdma_txreq to which the page is added 774 * @addr: dma address mapped by caller 775 * @len: length in bytes 776 * 777 * This is used to add a descriptor for memory that is already dma mapped. 778 * 779 * In this case, there is no unmapping as part of the progress processing for 780 * this memory location. 781 * 782 * Return: 783 * 0 - success, -ENOMEM - couldn't extend descriptor array 784 */ 785 786 static inline int sdma_txadd_daddr( 787 struct hfi1_devdata *dd, 788 struct sdma_txreq *tx, 789 dma_addr_t addr, 790 u16 len) 791 { 792 int rval; 793 794 if ((unlikely(tx->num_desc == tx->desc_limit))) { 795 rval = ext_coal_sdma_tx_descs(dd, tx, SDMA_MAP_NONE, 796 NULL, NULL, 0, 0); 797 if (rval <= 0) 798 return rval; 799 } 800 801 return _sdma_txadd_daddr(dd, SDMA_MAP_NONE, tx, addr, len); 802 } 803 804 /** 805 * sdma_txadd_kvaddr() - add a kernel virtual address to sdma_txreq 806 * @dd: the device to use for mapping 807 * @tx: sdma_txreq to which the page is added 808 * @kvaddr: the kernel virtual address 809 * @len: length in bytes 810 * 811 * This is used to add a descriptor referenced by the indicated kvaddr and 812 * len. 813 * 814 * The mapping/unmapping of the kvaddr and len is automatically handled. 815 * 816 * Return: 817 * 0 - success, -ENOSPC - mapping fail, -ENOMEM - couldn't extend/coalesce 818 * descriptor array 819 */ 820 static inline int sdma_txadd_kvaddr( 821 struct hfi1_devdata *dd, 822 struct sdma_txreq *tx, 823 void *kvaddr, 824 u16 len) 825 { 826 dma_addr_t addr; 827 int rval; 828 829 if ((unlikely(tx->num_desc == tx->desc_limit))) { 830 rval = ext_coal_sdma_tx_descs(dd, tx, SDMA_MAP_SINGLE, 831 kvaddr, NULL, 0, len); 832 if (rval <= 0) 833 return rval; 834 } 835 836 addr = dma_map_single( 837 &dd->pcidev->dev, 838 kvaddr, 839 len, 840 DMA_TO_DEVICE); 841 842 if (unlikely(dma_mapping_error(&dd->pcidev->dev, addr))) { 843 __sdma_txclean(dd, tx); 844 return -ENOSPC; 845 } 846 847 return _sdma_txadd_daddr( 848 dd, SDMA_MAP_SINGLE, tx, addr, len); 849 } 850 851 struct iowait; 852 853 int sdma_send_txreq(struct sdma_engine *sde, 854 struct iowait *wait, 855 struct sdma_txreq *tx); 856 int sdma_send_txlist(struct sdma_engine *sde, 857 struct iowait *wait, 858 struct list_head *tx_list, 859 u32 *count); 860 861 int sdma_ahg_alloc(struct sdma_engine *sde); 862 void sdma_ahg_free(struct sdma_engine *sde, int ahg_index); 863 864 /** 865 * sdma_build_ahg - build ahg descriptor 866 * @data 867 * @dwindex 868 * @startbit 869 * @bits 870 * 871 * Build and return a 32 bit descriptor. 872 */ 873 static inline u32 sdma_build_ahg_descriptor( 874 u16 data, 875 u8 dwindex, 876 u8 startbit, 877 u8 bits) 878 { 879 return (u32)(1UL << SDMA_AHG_UPDATE_ENABLE_SHIFT | 880 ((startbit & SDMA_AHG_FIELD_START_MASK) << 881 SDMA_AHG_FIELD_START_SHIFT) | 882 ((bits & SDMA_AHG_FIELD_LEN_MASK) << 883 SDMA_AHG_FIELD_LEN_SHIFT) | 884 ((dwindex & SDMA_AHG_INDEX_MASK) << 885 SDMA_AHG_INDEX_SHIFT) | 886 ((data & SDMA_AHG_VALUE_MASK) << 887 SDMA_AHG_VALUE_SHIFT)); 888 } 889 890 /** 891 * sdma_progress - use seq number of detect head progress 892 * @sde: sdma_engine to check 893 * @seq: base seq count 894 * @tx: txreq for which we need to check descriptor availability 895 * 896 * This is used in the appropriate spot in the sleep routine 897 * to check for potential ring progress. This routine gets the 898 * seqcount before queuing the iowait structure for progress. 899 * 900 * If the seqcount indicates that progress needs to be checked, 901 * re-submission is detected by checking whether the descriptor 902 * queue has enough descriptor for the txreq. 903 */ 904 static inline unsigned sdma_progress(struct sdma_engine *sde, unsigned seq, 905 struct sdma_txreq *tx) 906 { 907 if (read_seqretry(&sde->head_lock, seq)) { 908 sde->desc_avail = sdma_descq_freecnt(sde); 909 if (tx->num_desc > sde->desc_avail) 910 return 0; 911 return 1; 912 } 913 return 0; 914 } 915 916 /** 917 * sdma_iowait_schedule() - initialize wait structure 918 * @sde: sdma_engine to schedule 919 * @wait: wait struct to schedule 920 * 921 * This function initializes the iowait 922 * structure embedded in the QP or PQ. 923 * 924 */ 925 static inline void sdma_iowait_schedule( 926 struct sdma_engine *sde, 927 struct iowait *wait) 928 { 929 struct hfi1_pportdata *ppd = sde->dd->pport; 930 931 iowait_schedule(wait, ppd->hfi1_wq, sde->cpu); 932 } 933 934 /* for use by interrupt handling */ 935 void sdma_engine_error(struct sdma_engine *sde, u64 status); 936 void sdma_engine_interrupt(struct sdma_engine *sde, u64 status); 937 938 /* 939 * 940 * The diagram below details the relationship of the mapping structures 941 * 942 * Since the mapping now allows for non-uniform engines per vl, the 943 * number of engines for a vl is either the vl_engines[vl] or 944 * a computation based on num_sdma/num_vls: 945 * 946 * For example: 947 * nactual = vl_engines ? vl_engines[vl] : num_sdma/num_vls 948 * 949 * n = roundup to next highest power of 2 using nactual 950 * 951 * In the case where there are num_sdma/num_vls doesn't divide 952 * evenly, the extras are added from the last vl downward. 953 * 954 * For the case where n > nactual, the engines are assigned 955 * in a round robin fashion wrapping back to the first engine 956 * for a particular vl. 957 * 958 * dd->sdma_map 959 * | sdma_map_elem[0] 960 * | +--------------------+ 961 * v | mask | 962 * sdma_vl_map |--------------------| 963 * +--------------------------+ | sde[0] -> eng 1 | 964 * | list (RCU) | |--------------------| 965 * |--------------------------| ->| sde[1] -> eng 2 | 966 * | mask | --/ |--------------------| 967 * |--------------------------| -/ | * | 968 * | actual_vls (max 8) | -/ |--------------------| 969 * |--------------------------| --/ | sde[n-1] -> eng n | 970 * | vls (max 8) | -/ +--------------------+ 971 * |--------------------------| --/ 972 * | map[0] |-/ 973 * |--------------------------| +---------------------+ 974 * | map[1] |--- | mask | 975 * |--------------------------| \---- |---------------------| 976 * | * | \-- | sde[0] -> eng 1+n | 977 * | * | \---- |---------------------| 978 * | * | \->| sde[1] -> eng 2+n | 979 * |--------------------------| |---------------------| 980 * | map[vls - 1] |- | * | 981 * +--------------------------+ \- |---------------------| 982 * \- | sde[m-1] -> eng m+n | 983 * \ +---------------------+ 984 * \- 985 * \ 986 * \- +----------------------+ 987 * \- | mask | 988 * \ |----------------------| 989 * \- | sde[0] -> eng 1+m+n | 990 * \- |----------------------| 991 * >| sde[1] -> eng 2+m+n | 992 * |----------------------| 993 * | * | 994 * |----------------------| 995 * | sde[o-1] -> eng o+m+n| 996 * +----------------------+ 997 * 998 */ 999 1000 /** 1001 * struct sdma_map_elem - mapping for a vl 1002 * @mask - selector mask 1003 * @sde - array of engines for this vl 1004 * 1005 * The mask is used to "mod" the selector 1006 * to produce index into the trailing 1007 * array of sdes. 1008 */ 1009 struct sdma_map_elem { 1010 u32 mask; 1011 struct sdma_engine *sde[0]; 1012 }; 1013 1014 /** 1015 * struct sdma_map_el - mapping for a vl 1016 * @engine_to_vl - map of an engine to a vl 1017 * @list - rcu head for free callback 1018 * @mask - vl mask to "mod" the vl to produce an index to map array 1019 * @actual_vls - number of vls 1020 * @vls - number of vls rounded to next power of 2 1021 * @map - array of sdma_map_elem entries 1022 * 1023 * This is the parent mapping structure. The trailing 1024 * members of the struct point to sdma_map_elem entries, which 1025 * in turn point to an array of sde's for that vl. 1026 */ 1027 struct sdma_vl_map { 1028 s8 engine_to_vl[TXE_NUM_SDMA_ENGINES]; 1029 struct rcu_head list; 1030 u32 mask; 1031 u8 actual_vls; 1032 u8 vls; 1033 struct sdma_map_elem *map[0]; 1034 }; 1035 1036 int sdma_map_init( 1037 struct hfi1_devdata *dd, 1038 u8 port, 1039 u8 num_vls, 1040 u8 *vl_engines); 1041 1042 /* slow path */ 1043 void _sdma_engine_progress_schedule(struct sdma_engine *sde); 1044 1045 /** 1046 * sdma_engine_progress_schedule() - schedule progress on engine 1047 * @sde: sdma_engine to schedule progress 1048 * 1049 * This is the fast path. 1050 * 1051 */ 1052 static inline void sdma_engine_progress_schedule( 1053 struct sdma_engine *sde) 1054 { 1055 if (!sde || sdma_descq_inprocess(sde) < (sde->descq_cnt / 8)) 1056 return; 1057 _sdma_engine_progress_schedule(sde); 1058 } 1059 1060 struct sdma_engine *sdma_select_engine_sc( 1061 struct hfi1_devdata *dd, 1062 u32 selector, 1063 u8 sc5); 1064 1065 struct sdma_engine *sdma_select_engine_vl( 1066 struct hfi1_devdata *dd, 1067 u32 selector, 1068 u8 vl); 1069 1070 struct sdma_engine *sdma_select_user_engine(struct hfi1_devdata *dd, 1071 u32 selector, u8 vl); 1072 ssize_t sdma_get_cpu_to_sde_map(struct sdma_engine *sde, char *buf); 1073 ssize_t sdma_set_cpu_to_sde_map(struct sdma_engine *sde, const char *buf, 1074 size_t count); 1075 int sdma_engine_get_vl(struct sdma_engine *sde); 1076 void sdma_seqfile_dump_sde(struct seq_file *s, struct sdma_engine *); 1077 void sdma_seqfile_dump_cpu_list(struct seq_file *s, struct hfi1_devdata *dd, 1078 unsigned long cpuid); 1079 1080 #ifdef CONFIG_SDMA_VERBOSITY 1081 void sdma_dumpstate(struct sdma_engine *); 1082 #endif 1083 static inline char *slashstrip(char *s) 1084 { 1085 char *r = s; 1086 1087 while (*s) 1088 if (*s++ == '/') 1089 r = s; 1090 return r; 1091 } 1092 1093 u16 sdma_get_descq_cnt(void); 1094 1095 extern uint mod_num_sdma; 1096 1097 void sdma_update_lmc(struct hfi1_devdata *dd, u64 mask, u32 lid); 1098 1099 #endif 1100