xref: /openbmc/linux/drivers/infiniband/hw/hfi1/opfn.h (revision 0bf49ffb)
1 /* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
2 /*
3  * Copyright(c) 2018 Intel Corporation.
4  *
5  */
6 #ifndef _HFI1_OPFN_H
7 #define _HFI1_OPFN_H
8 
9 /**
10  * DOC: Omni Path Feature Negotion (OPFN)
11  *
12  * OPFN is a discovery protocol for Intel Omni-Path fabric that
13  * allows two RC QPs to negotiate a common feature that both QPs
14  * can support. Currently, the only OPA feature that OPFN
15  * supports is TID RDMA.
16  *
17  * Architecture
18  *
19  * OPFN involves the communication between two QPs on the HFI
20  * level on an Omni-Path fabric, and ULPs have no knowledge of
21  * OPFN at all.
22  *
23  * Implementation
24  *
25  * OPFN extends the existing IB RC protocol with the following
26  * changes:
27  * -- Uses Bit 24 (reserved) of DWORD 1 of Base Transport
28  *    Header (BTH1) to indicate that the RC QP supports OPFN;
29  * -- Uses a combination of RC COMPARE_SWAP opcode (0x13) and
30  *    the address U64_MAX (0xFFFFFFFFFFFFFFFF) as an OPFN
31  *    request; The 64-bit data carried with the request/response
32  *    contains the parameters for negotiation and will be
33  *    defined in tid_rdma.c file;
34  * -- Defines IB_WR_RESERVED3 as IB_WR_OPFN.
35  *
36  * The OPFN communication will be triggered when an RC QP
37  * receives a request with Bit 24 of BTH1 set. The responder QP
38  * will then post send an OPFN request with its local
39  * parameters, which will be sent to the requester QP once all
40  * existing requests on the responder QP side have been sent.
41  * Once the requester QP receives the OPFN request, it will
42  * keep a copy of the responder QP's parameters, and return a
43  * response packet with its own local parameters. The responder
44  * QP receives the response packet and keeps a copy of the requester
45  * QP's parameters. After this exchange, each side has the parameters
46  * for both sides and therefore can select the right parameters
47  * for future transactions
48  */
49 
50 #include <linux/workqueue.h>
51 #include <rdma/ib_verbs.h>
52 #include <rdma/rdmavt_qp.h>
53 
54 /* STL Verbs Extended */
55 #define IB_BTHE_E_SHIFT           24
56 #define HFI1_VERBS_E_ATOMIC_VADDR U64_MAX
57 
58 enum hfi1_opfn_codes {
59 	STL_VERBS_EXTD_NONE = 0,
60 	STL_VERBS_EXTD_TID_RDMA,
61 	STL_VERBS_EXTD_MAX
62 };
63 
64 struct hfi1_opfn_data {
65 	u8 extended;
66 	u16 requested;
67 	u16 completed;
68 	enum hfi1_opfn_codes curr;
69 	/* serialize opfn function calls */
70 	spinlock_t lock;
71 	struct work_struct opfn_work;
72 };
73 
74 /* WR opcode for OPFN */
75 #define IB_WR_OPFN IB_WR_RESERVED3
76 
77 void opfn_send_conn_request(struct work_struct *work);
78 void opfn_conn_response(struct rvt_qp *qp, struct rvt_ack_entry *e,
79 			struct ib_atomic_eth *ateth);
80 void opfn_conn_reply(struct rvt_qp *qp, u64 data);
81 void opfn_conn_error(struct rvt_qp *qp);
82 void opfn_qp_init(struct rvt_qp *qp, struct ib_qp_attr *attr, int attr_mask);
83 void opfn_trigger_conn_request(struct rvt_qp *qp, u32 bth1);
84 int opfn_init(void);
85 void opfn_exit(void);
86 
87 #endif /* _HFI1_OPFN_H */
88