xref: /openbmc/linux/drivers/infiniband/hw/hfi1/intr.c (revision 85250a24)
1 // SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
2 /*
3  * Copyright(c) 2015, 2016 Intel Corporation.
4  */
5 
6 #include <linux/pci.h>
7 #include <linux/delay.h>
8 #include <linux/bitmap.h>
9 
10 #include "hfi.h"
11 #include "common.h"
12 #include "sdma.h"
13 
14 #define LINK_UP_DELAY  500  /* in microseconds */
15 
16 static void set_mgmt_allowed(struct hfi1_pportdata *ppd)
17 {
18 	u32 frame;
19 	struct hfi1_devdata *dd = ppd->dd;
20 
21 	if (ppd->neighbor_type == NEIGHBOR_TYPE_HFI) {
22 		ppd->mgmt_allowed = 1;
23 	} else {
24 		read_8051_config(dd, REMOTE_LNI_INFO, GENERAL_CONFIG, &frame);
25 		ppd->mgmt_allowed = (frame >> MGMT_ALLOWED_SHIFT)
26 		& MGMT_ALLOWED_MASK;
27 	}
28 }
29 
30 /*
31  * Our neighbor has indicated that we are allowed to act as a fabric
32  * manager, so place the full management partition key in the second
33  * (0-based) pkey array position. Note that we should already have
34  * the limited management partition key in array element 1, and also
35  * that the port is not yet up when add_full_mgmt_pkey() is invoked.
36  */
37 static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd)
38 {
39 	struct hfi1_devdata *dd = ppd->dd;
40 
41 	/* Sanity check - ppd->pkeys[2] should be 0, or already initialized */
42 	if (!((ppd->pkeys[2] == 0) || (ppd->pkeys[2] == FULL_MGMT_P_KEY)))
43 		dd_dev_warn(dd, "%s pkey[2] already set to 0x%x, resetting it to 0x%x\n",
44 			    __func__, ppd->pkeys[2], FULL_MGMT_P_KEY);
45 	ppd->pkeys[2] = FULL_MGMT_P_KEY;
46 	(void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0);
47 	hfi1_event_pkey_change(ppd->dd, ppd->port);
48 }
49 
50 /**
51  * format_hwmsg - format a single hwerror message
52  * @msg: message buffer
53  * @msgl: length of message buffer
54  * @hwmsg: message to add to message buffer
55  */
56 static void format_hwmsg(char *msg, size_t msgl, const char *hwmsg)
57 {
58 	strlcat(msg, "[", msgl);
59 	strlcat(msg, hwmsg, msgl);
60 	strlcat(msg, "]", msgl);
61 }
62 
63 /**
64  * hfi1_format_hwerrors - format hardware error messages for display
65  * @hwerrs: hardware errors bit vector
66  * @hwerrmsgs: hardware error descriptions
67  * @nhwerrmsgs: number of hwerrmsgs
68  * @msg: message buffer
69  * @msgl: message buffer length
70  */
71 void hfi1_format_hwerrors(u64 hwerrs, const struct hfi1_hwerror_msgs *hwerrmsgs,
72 			  size_t nhwerrmsgs, char *msg, size_t msgl)
73 {
74 	int i;
75 
76 	for (i = 0; i < nhwerrmsgs; i++)
77 		if (hwerrs & hwerrmsgs[i].mask)
78 			format_hwmsg(msg, msgl, hwerrmsgs[i].msg);
79 }
80 
81 static void signal_ib_event(struct hfi1_pportdata *ppd, enum ib_event_type ev)
82 {
83 	struct ib_event event;
84 	struct hfi1_devdata *dd = ppd->dd;
85 
86 	/*
87 	 * Only call ib_dispatch_event() if the IB device has been
88 	 * registered.  HFI1_INITED is set iff the driver has successfully
89 	 * registered with the IB core.
90 	 */
91 	if (!(dd->flags & HFI1_INITTED))
92 		return;
93 	event.device = &dd->verbs_dev.rdi.ibdev;
94 	event.element.port_num = ppd->port;
95 	event.event = ev;
96 	ib_dispatch_event(&event);
97 }
98 
99 /**
100  * handle_linkup_change - finish linkup/down state changes
101  * @dd: valid device
102  * @linkup: link state information
103  *
104  * Handle a linkup or link down notification.
105  * The HW needs time to finish its link up state change. Give it that chance.
106  *
107  * This is called outside an interrupt.
108  *
109  */
110 void handle_linkup_change(struct hfi1_devdata *dd, u32 linkup)
111 {
112 	struct hfi1_pportdata *ppd = &dd->pport[0];
113 	enum ib_event_type ev;
114 
115 	if (!(ppd->linkup ^ !!linkup))
116 		return;	/* no change, nothing to do */
117 
118 	if (linkup) {
119 		/*
120 		 * Quick linkup and all link up on the simulator does not
121 		 * trigger or implement:
122 		 *	- VerifyCap interrupt
123 		 *	- VerifyCap frames
124 		 * But rather moves directly to LinkUp.
125 		 *
126 		 * Do the work of the VerifyCap interrupt handler,
127 		 * handle_verify_cap(), but do not try moving the state to
128 		 * LinkUp as we are already there.
129 		 *
130 		 * NOTE: This uses this device's vAU, vCU, and vl15_init for
131 		 * the remote values.  Both sides must be using the values.
132 		 */
133 		if (quick_linkup || dd->icode == ICODE_FUNCTIONAL_SIMULATOR) {
134 			set_up_vau(dd, dd->vau);
135 			set_up_vl15(dd, dd->vl15_init);
136 			assign_remote_cm_au_table(dd, dd->vcu);
137 		}
138 
139 		ppd->neighbor_guid =
140 			read_csr(dd, DC_DC8051_STS_REMOTE_GUID);
141 		ppd->neighbor_type =
142 			read_csr(dd, DC_DC8051_STS_REMOTE_NODE_TYPE) &
143 				 DC_DC8051_STS_REMOTE_NODE_TYPE_VAL_MASK;
144 		ppd->neighbor_port_number =
145 			read_csr(dd, DC_DC8051_STS_REMOTE_PORT_NO) &
146 				 DC_DC8051_STS_REMOTE_PORT_NO_VAL_SMASK;
147 		ppd->neighbor_fm_security =
148 			read_csr(dd, DC_DC8051_STS_REMOTE_FM_SECURITY) &
149 				 DC_DC8051_STS_LOCAL_FM_SECURITY_DISABLED_MASK;
150 		dd_dev_info(dd,
151 			    "Neighbor Guid %llx, Type %d, Port Num %d\n",
152 			    ppd->neighbor_guid, ppd->neighbor_type,
153 			    ppd->neighbor_port_number);
154 
155 		/* HW needs LINK_UP_DELAY to settle, give it that chance */
156 		udelay(LINK_UP_DELAY);
157 
158 		/*
159 		 * 'MgmtAllowed' information, which is exchanged during
160 		 * LNI, is available at this point.
161 		 */
162 		set_mgmt_allowed(ppd);
163 
164 		if (ppd->mgmt_allowed)
165 			add_full_mgmt_pkey(ppd);
166 
167 		/* physical link went up */
168 		ppd->linkup = 1;
169 		ppd->offline_disabled_reason =
170 			HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE);
171 
172 		/* link widths are not available until the link is fully up */
173 		get_linkup_link_widths(ppd);
174 
175 	} else {
176 		/* physical link went down */
177 		ppd->linkup = 0;
178 
179 		/* clear HW details of the previous connection */
180 		ppd->actual_vls_operational = 0;
181 		reset_link_credits(dd);
182 
183 		/* freeze after a link down to guarantee a clean egress */
184 		start_freeze_handling(ppd, FREEZE_SELF | FREEZE_LINK_DOWN);
185 
186 		ev = IB_EVENT_PORT_ERR;
187 
188 		hfi1_set_uevent_bits(ppd, _HFI1_EVENT_LINKDOWN_BIT);
189 
190 		/* if we are down, the neighbor is down */
191 		ppd->neighbor_normal = 0;
192 
193 		/* notify IB of the link change */
194 		signal_ib_event(ppd, ev);
195 	}
196 }
197 
198 /*
199  * Handle receive or urgent interrupts for user contexts.  This means a user
200  * process was waiting for a packet to arrive, and didn't want to poll.
201  */
202 void handle_user_interrupt(struct hfi1_ctxtdata *rcd)
203 {
204 	struct hfi1_devdata *dd = rcd->dd;
205 	unsigned long flags;
206 
207 	spin_lock_irqsave(&dd->uctxt_lock, flags);
208 	if (bitmap_empty(rcd->in_use_ctxts, HFI1_MAX_SHARED_CTXTS))
209 		goto done;
210 
211 	if (test_and_clear_bit(HFI1_CTXT_WAITING_RCV, &rcd->event_flags)) {
212 		wake_up_interruptible(&rcd->wait);
213 		hfi1_rcvctrl(dd, HFI1_RCVCTRL_INTRAVAIL_DIS, rcd);
214 	} else if (test_and_clear_bit(HFI1_CTXT_WAITING_URG,
215 							&rcd->event_flags)) {
216 		rcd->urgent++;
217 		wake_up_interruptible(&rcd->wait);
218 	}
219 done:
220 	spin_unlock_irqrestore(&dd->uctxt_lock, flags);
221 }
222