1 /* 2 * Copyright(c) 2015, 2016 Intel Corporation. 3 * 4 * This file is provided under a dual BSD/GPLv2 license. When using or 5 * redistributing this file, you may do so under either license. 6 * 7 * GPL LICENSE SUMMARY 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * BSD LICENSE 19 * 20 * Redistribution and use in source and binary forms, with or without 21 * modification, are permitted provided that the following conditions 22 * are met: 23 * 24 * - Redistributions of source code must retain the above copyright 25 * notice, this list of conditions and the following disclaimer. 26 * - Redistributions in binary form must reproduce the above copyright 27 * notice, this list of conditions and the following disclaimer in 28 * the documentation and/or other materials provided with the 29 * distribution. 30 * - Neither the name of Intel Corporation nor the names of its 31 * contributors may be used to endorse or promote products derived 32 * from this software without specific prior written permission. 33 * 34 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 35 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 36 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 37 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 38 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 39 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 40 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 41 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 42 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 43 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 44 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 45 * 46 */ 47 48 #ifndef _COMMON_H 49 #define _COMMON_H 50 51 #include <rdma/hfi/hfi1_user.h> 52 53 /* 54 * This file contains defines, structures, etc. that are used 55 * to communicate between kernel and user code. 56 */ 57 58 /* version of protocol header (known to chip also). In the long run, 59 * we should be able to generate and accept a range of version numbers; 60 * for now we only accept one, and it's compiled in. 61 */ 62 #define IPS_PROTO_VERSION 2 63 64 /* 65 * These are compile time constants that you may want to enable or disable 66 * if you are trying to debug problems with code or performance. 67 * HFI1_VERBOSE_TRACING define as 1 if you want additional tracing in 68 * fast path code 69 * HFI1_TRACE_REGWRITES define as 1 if you want register writes to be 70 * traced in fast path code 71 * _HFI1_TRACING define as 0 if you want to remove all tracing in a 72 * compilation unit 73 */ 74 75 /* 76 * If a packet's QP[23:16] bits match this value, then it is 77 * a PSM packet and the hardware will expect a KDETH header 78 * following the BTH. 79 */ 80 #define DEFAULT_KDETH_QP 0x80 81 82 /* driver/hw feature set bitmask */ 83 #define HFI1_CAP_USER_SHIFT 24 84 #define HFI1_CAP_MASK ((1UL << HFI1_CAP_USER_SHIFT) - 1) 85 /* locked flag - if set, only HFI1_CAP_WRITABLE_MASK bits can be set */ 86 #define HFI1_CAP_LOCKED_SHIFT 63 87 #define HFI1_CAP_LOCKED_MASK 0x1ULL 88 #define HFI1_CAP_LOCKED_SMASK (HFI1_CAP_LOCKED_MASK << HFI1_CAP_LOCKED_SHIFT) 89 /* extra bits used between kernel and user processes */ 90 #define HFI1_CAP_MISC_SHIFT (HFI1_CAP_USER_SHIFT * 2) 91 #define HFI1_CAP_MISC_MASK ((1ULL << (HFI1_CAP_LOCKED_SHIFT - \ 92 HFI1_CAP_MISC_SHIFT)) - 1) 93 94 #define HFI1_CAP_KSET(cap) ({ hfi1_cap_mask |= HFI1_CAP_##cap; hfi1_cap_mask; }) 95 #define HFI1_CAP_KCLEAR(cap) \ 96 ({ \ 97 hfi1_cap_mask &= ~HFI1_CAP_##cap; \ 98 hfi1_cap_mask; \ 99 }) 100 #define HFI1_CAP_USET(cap) \ 101 ({ \ 102 hfi1_cap_mask |= (HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT); \ 103 hfi1_cap_mask; \ 104 }) 105 #define HFI1_CAP_UCLEAR(cap) \ 106 ({ \ 107 hfi1_cap_mask &= ~(HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT); \ 108 hfi1_cap_mask; \ 109 }) 110 #define HFI1_CAP_SET(cap) \ 111 ({ \ 112 hfi1_cap_mask |= (HFI1_CAP_##cap | (HFI1_CAP_##cap << \ 113 HFI1_CAP_USER_SHIFT)); \ 114 hfi1_cap_mask; \ 115 }) 116 #define HFI1_CAP_CLEAR(cap) \ 117 ({ \ 118 hfi1_cap_mask &= ~(HFI1_CAP_##cap | \ 119 (HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT)); \ 120 hfi1_cap_mask; \ 121 }) 122 #define HFI1_CAP_LOCK() \ 123 ({ hfi1_cap_mask |= HFI1_CAP_LOCKED_SMASK; hfi1_cap_mask; }) 124 #define HFI1_CAP_LOCKED() (!!(hfi1_cap_mask & HFI1_CAP_LOCKED_SMASK)) 125 /* 126 * The set of capability bits that can be changed after initial load 127 * This set is the same for kernel and user contexts. However, for 128 * user contexts, the set can be further filtered by using the 129 * HFI1_CAP_RESERVED_MASK bits. 130 */ 131 #define HFI1_CAP_WRITABLE_MASK (HFI1_CAP_SDMA_AHG | \ 132 HFI1_CAP_HDRSUPP | \ 133 HFI1_CAP_MULTI_PKT_EGR | \ 134 HFI1_CAP_NODROP_RHQ_FULL | \ 135 HFI1_CAP_NODROP_EGR_FULL | \ 136 HFI1_CAP_ALLOW_PERM_JKEY | \ 137 HFI1_CAP_STATIC_RATE_CTRL | \ 138 HFI1_CAP_PRINT_UNIMPL | \ 139 HFI1_CAP_TID_UNMAP) 140 /* 141 * A set of capability bits that are "global" and are not allowed to be 142 * set in the user bitmask. 143 */ 144 #define HFI1_CAP_RESERVED_MASK ((HFI1_CAP_SDMA | \ 145 HFI1_CAP_USE_SDMA_HEAD | \ 146 HFI1_CAP_EXTENDED_PSN | \ 147 HFI1_CAP_PRINT_UNIMPL | \ 148 HFI1_CAP_NO_INTEGRITY | \ 149 HFI1_CAP_PKEY_CHECK) << \ 150 HFI1_CAP_USER_SHIFT) 151 /* 152 * Set of capabilities that need to be enabled for kernel context in 153 * order to be allowed for user contexts, as well. 154 */ 155 #define HFI1_CAP_MUST_HAVE_KERN (HFI1_CAP_STATIC_RATE_CTRL) 156 /* Default enabled capabilities (both kernel and user) */ 157 #define HFI1_CAP_MASK_DEFAULT (HFI1_CAP_HDRSUPP | \ 158 HFI1_CAP_NODROP_RHQ_FULL | \ 159 HFI1_CAP_NODROP_EGR_FULL | \ 160 HFI1_CAP_SDMA | \ 161 HFI1_CAP_PRINT_UNIMPL | \ 162 HFI1_CAP_STATIC_RATE_CTRL | \ 163 HFI1_CAP_PKEY_CHECK | \ 164 HFI1_CAP_MULTI_PKT_EGR | \ 165 HFI1_CAP_EXTENDED_PSN | \ 166 ((HFI1_CAP_HDRSUPP | \ 167 HFI1_CAP_MULTI_PKT_EGR | \ 168 HFI1_CAP_STATIC_RATE_CTRL | \ 169 HFI1_CAP_PKEY_CHECK | \ 170 HFI1_CAP_EARLY_CREDIT_RETURN) << \ 171 HFI1_CAP_USER_SHIFT)) 172 /* 173 * A bitmask of kernel/global capabilities that should be communicated 174 * to user level processes. 175 */ 176 #define HFI1_CAP_K2U (HFI1_CAP_SDMA | \ 177 HFI1_CAP_EXTENDED_PSN | \ 178 HFI1_CAP_PKEY_CHECK | \ 179 HFI1_CAP_NO_INTEGRITY) 180 181 #define HFI1_USER_SWVERSION ((HFI1_USER_SWMAJOR << HFI1_SWMAJOR_SHIFT) | \ 182 HFI1_USER_SWMINOR) 183 184 #ifndef HFI1_KERN_TYPE 185 #define HFI1_KERN_TYPE 0 186 #endif 187 188 /* 189 * Similarly, this is the kernel version going back to the user. It's 190 * slightly different, in that we want to tell if the driver was built as 191 * part of a Intel release, or from the driver from openfabrics.org, 192 * kernel.org, or a standard distribution, for support reasons. 193 * The high bit is 0 for non-Intel and 1 for Intel-built/supplied. 194 * 195 * It's returned by the driver to the user code during initialization in the 196 * spi_sw_version field of hfi1_base_info, so the user code can in turn 197 * check for compatibility with the kernel. 198 */ 199 #define HFI1_KERN_SWVERSION ((HFI1_KERN_TYPE << 31) | HFI1_USER_SWVERSION) 200 201 /* 202 * Define the driver version number. This is something that refers only 203 * to the driver itself, not the software interfaces it supports. 204 */ 205 #ifndef HFI1_DRIVER_VERSION_BASE 206 #define HFI1_DRIVER_VERSION_BASE "0.9-294" 207 #endif 208 209 /* create the final driver version string */ 210 #ifdef HFI1_IDSTR 211 #define HFI1_DRIVER_VERSION HFI1_DRIVER_VERSION_BASE " " HFI1_IDSTR 212 #else 213 #define HFI1_DRIVER_VERSION HFI1_DRIVER_VERSION_BASE 214 #endif 215 216 /* 217 * Diagnostics can send a packet by writing the following 218 * struct to the diag packet special file. 219 * 220 * This allows a custom PBC qword, so that special modes and deliberate 221 * changes to CRCs can be used. 222 */ 223 #define _DIAG_PKT_VERS 1 224 struct diag_pkt { 225 __u16 version; /* structure version */ 226 __u16 unit; /* which device */ 227 __u16 sw_index; /* send sw index to use */ 228 __u16 len; /* data length, in bytes */ 229 __u16 port; /* port number */ 230 __u16 unused; 231 __u32 flags; /* call flags */ 232 __u64 data; /* user data pointer */ 233 __u64 pbc; /* PBC for the packet */ 234 }; 235 236 /* diag_pkt flags */ 237 #define F_DIAGPKT_WAIT 0x1 /* wait until packet is sent */ 238 239 /* 240 * The next set of defines are for packet headers, and chip register 241 * and memory bits that are visible to and/or used by user-mode software. 242 */ 243 244 /* 245 * Receive Header Flags 246 */ 247 #define RHF_PKT_LEN_SHIFT 0 248 #define RHF_PKT_LEN_MASK 0xfffull 249 #define RHF_PKT_LEN_SMASK (RHF_PKT_LEN_MASK << RHF_PKT_LEN_SHIFT) 250 251 #define RHF_RCV_TYPE_SHIFT 12 252 #define RHF_RCV_TYPE_MASK 0x7ull 253 #define RHF_RCV_TYPE_SMASK (RHF_RCV_TYPE_MASK << RHF_RCV_TYPE_SHIFT) 254 255 #define RHF_USE_EGR_BFR_SHIFT 15 256 #define RHF_USE_EGR_BFR_MASK 0x1ull 257 #define RHF_USE_EGR_BFR_SMASK (RHF_USE_EGR_BFR_MASK << RHF_USE_EGR_BFR_SHIFT) 258 259 #define RHF_EGR_INDEX_SHIFT 16 260 #define RHF_EGR_INDEX_MASK 0x7ffull 261 #define RHF_EGR_INDEX_SMASK (RHF_EGR_INDEX_MASK << RHF_EGR_INDEX_SHIFT) 262 263 #define RHF_DC_INFO_SHIFT 27 264 #define RHF_DC_INFO_MASK 0x1ull 265 #define RHF_DC_INFO_SMASK (RHF_DC_INFO_MASK << RHF_DC_INFO_SHIFT) 266 267 #define RHF_RCV_SEQ_SHIFT 28 268 #define RHF_RCV_SEQ_MASK 0xfull 269 #define RHF_RCV_SEQ_SMASK (RHF_RCV_SEQ_MASK << RHF_RCV_SEQ_SHIFT) 270 271 #define RHF_EGR_OFFSET_SHIFT 32 272 #define RHF_EGR_OFFSET_MASK 0xfffull 273 #define RHF_EGR_OFFSET_SMASK (RHF_EGR_OFFSET_MASK << RHF_EGR_OFFSET_SHIFT) 274 #define RHF_HDRQ_OFFSET_SHIFT 44 275 #define RHF_HDRQ_OFFSET_MASK 0x1ffull 276 #define RHF_HDRQ_OFFSET_SMASK (RHF_HDRQ_OFFSET_MASK << RHF_HDRQ_OFFSET_SHIFT) 277 #define RHF_K_HDR_LEN_ERR (0x1ull << 53) 278 #define RHF_DC_UNC_ERR (0x1ull << 54) 279 #define RHF_DC_ERR (0x1ull << 55) 280 #define RHF_RCV_TYPE_ERR_SHIFT 56 281 #define RHF_RCV_TYPE_ERR_MASK 0x7ul 282 #define RHF_RCV_TYPE_ERR_SMASK (RHF_RCV_TYPE_ERR_MASK << RHF_RCV_TYPE_ERR_SHIFT) 283 #define RHF_TID_ERR (0x1ull << 59) 284 #define RHF_LEN_ERR (0x1ull << 60) 285 #define RHF_ECC_ERR (0x1ull << 61) 286 #define RHF_VCRC_ERR (0x1ull << 62) 287 #define RHF_ICRC_ERR (0x1ull << 63) 288 289 #define RHF_ERROR_SMASK 0xffe0000000000000ull /* bits 63:53 */ 290 291 /* RHF receive types */ 292 #define RHF_RCV_TYPE_EXPECTED 0 293 #define RHF_RCV_TYPE_EAGER 1 294 #define RHF_RCV_TYPE_IB 2 /* normal IB, IB Raw, or IPv6 */ 295 #define RHF_RCV_TYPE_ERROR 3 296 #define RHF_RCV_TYPE_BYPASS 4 297 #define RHF_RCV_TYPE_INVALID5 5 298 #define RHF_RCV_TYPE_INVALID6 6 299 #define RHF_RCV_TYPE_INVALID7 7 300 301 /* RHF receive type error - expected packet errors */ 302 #define RHF_RTE_EXPECTED_FLOW_SEQ_ERR 0x2 303 #define RHF_RTE_EXPECTED_FLOW_GEN_ERR 0x4 304 305 /* RHF receive type error - eager packet errors */ 306 #define RHF_RTE_EAGER_NO_ERR 0x0 307 308 /* RHF receive type error - IB packet errors */ 309 #define RHF_RTE_IB_NO_ERR 0x0 310 311 /* RHF receive type error - error packet errors */ 312 #define RHF_RTE_ERROR_NO_ERR 0x0 313 #define RHF_RTE_ERROR_OP_CODE_ERR 0x1 314 #define RHF_RTE_ERROR_KHDR_MIN_LEN_ERR 0x2 315 #define RHF_RTE_ERROR_KHDR_HCRC_ERR 0x3 316 #define RHF_RTE_ERROR_KHDR_KVER_ERR 0x4 317 #define RHF_RTE_ERROR_CONTEXT_ERR 0x5 318 #define RHF_RTE_ERROR_KHDR_TID_ERR 0x6 319 320 /* RHF receive type error - bypass packet errors */ 321 #define RHF_RTE_BYPASS_NO_ERR 0x0 322 323 /* IB - LRH header constants */ 324 #define HFI1_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */ 325 #define HFI1_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */ 326 327 /* misc. */ 328 #define SIZE_OF_CRC 1 329 330 #define LIM_MGMT_P_KEY 0x7FFF 331 #define FULL_MGMT_P_KEY 0xFFFF 332 333 #define DEFAULT_P_KEY LIM_MGMT_P_KEY 334 #define HFI1_FECN_SHIFT 31 335 #define HFI1_FECN_MASK 1 336 #define HFI1_FECN_SMASK BIT(HFI1_FECN_SHIFT) 337 #define HFI1_BECN_SHIFT 30 338 #define HFI1_BECN_MASK 1 339 #define HFI1_BECN_SMASK BIT(HFI1_BECN_SHIFT) 340 341 #define HFI1_PSM_IOC_BASE_SEQ 0x0 342 343 static inline __u64 rhf_to_cpu(const __le32 *rbuf) 344 { 345 return __le64_to_cpu(*((__le64 *)rbuf)); 346 } 347 348 static inline u64 rhf_err_flags(u64 rhf) 349 { 350 return rhf & RHF_ERROR_SMASK; 351 } 352 353 static inline u32 rhf_rcv_type(u64 rhf) 354 { 355 return (rhf >> RHF_RCV_TYPE_SHIFT) & RHF_RCV_TYPE_MASK; 356 } 357 358 static inline u32 rhf_rcv_type_err(u64 rhf) 359 { 360 return (rhf >> RHF_RCV_TYPE_ERR_SHIFT) & RHF_RCV_TYPE_ERR_MASK; 361 } 362 363 /* return size is in bytes, not DWORDs */ 364 static inline u32 rhf_pkt_len(u64 rhf) 365 { 366 return ((rhf & RHF_PKT_LEN_SMASK) >> RHF_PKT_LEN_SHIFT) << 2; 367 } 368 369 static inline u32 rhf_egr_index(u64 rhf) 370 { 371 return (rhf >> RHF_EGR_INDEX_SHIFT) & RHF_EGR_INDEX_MASK; 372 } 373 374 static inline u32 rhf_rcv_seq(u64 rhf) 375 { 376 return (rhf >> RHF_RCV_SEQ_SHIFT) & RHF_RCV_SEQ_MASK; 377 } 378 379 /* returned offset is in DWORDS */ 380 static inline u32 rhf_hdrq_offset(u64 rhf) 381 { 382 return (rhf >> RHF_HDRQ_OFFSET_SHIFT) & RHF_HDRQ_OFFSET_MASK; 383 } 384 385 static inline u64 rhf_use_egr_bfr(u64 rhf) 386 { 387 return rhf & RHF_USE_EGR_BFR_SMASK; 388 } 389 390 static inline u64 rhf_dc_info(u64 rhf) 391 { 392 return rhf & RHF_DC_INFO_SMASK; 393 } 394 395 static inline u32 rhf_egr_buf_offset(u64 rhf) 396 { 397 return (rhf >> RHF_EGR_OFFSET_SHIFT) & RHF_EGR_OFFSET_MASK; 398 } 399 #endif /* _COMMON_H */ 400