1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * tmp006.c - Support for TI TMP006 IR thermopile sensor 4 * 5 * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net> 6 * 7 * Driver for the Texas Instruments I2C 16-bit IR thermopile sensor 8 * 9 * (7-bit I2C slave address 0x40, changeable via ADR pins) 10 * 11 * TODO: data ready irq 12 */ 13 14 #include <linux/err.h> 15 #include <linux/i2c.h> 16 #include <linux/delay.h> 17 #include <linux/module.h> 18 #include <linux/pm.h> 19 #include <linux/bitops.h> 20 21 #include <linux/iio/iio.h> 22 #include <linux/iio/sysfs.h> 23 24 #define TMP006_VOBJECT 0x00 25 #define TMP006_TAMBIENT 0x01 26 #define TMP006_CONFIG 0x02 27 #define TMP006_MANUFACTURER_ID 0xfe 28 #define TMP006_DEVICE_ID 0xff 29 30 #define TMP006_TAMBIENT_SHIFT 2 31 32 #define TMP006_CONFIG_RESET BIT(15) 33 #define TMP006_CONFIG_DRDY_EN BIT(8) 34 #define TMP006_CONFIG_DRDY BIT(7) 35 36 #define TMP006_CONFIG_MOD_MASK GENMASK(14, 12) 37 38 #define TMP006_CONFIG_CR_MASK GENMASK(11, 9) 39 #define TMP006_CONFIG_CR_SHIFT 9 40 41 #define TMP006_MANUFACTURER_MAGIC 0x5449 42 #define TMP006_DEVICE_MAGIC 0x0067 43 44 struct tmp006_data { 45 struct i2c_client *client; 46 u16 config; 47 }; 48 49 static int tmp006_read_measurement(struct tmp006_data *data, u8 reg) 50 { 51 s32 ret; 52 int tries = 50; 53 54 while (tries-- > 0) { 55 ret = i2c_smbus_read_word_swapped(data->client, 56 TMP006_CONFIG); 57 if (ret < 0) 58 return ret; 59 if (ret & TMP006_CONFIG_DRDY) 60 break; 61 msleep(100); 62 } 63 64 if (tries < 0) 65 return -EIO; 66 67 return i2c_smbus_read_word_swapped(data->client, reg); 68 } 69 70 static const int tmp006_freqs[5][2] = { {4, 0}, {2, 0}, {1, 0}, 71 {0, 500000}, {0, 250000} }; 72 73 static int tmp006_read_raw(struct iio_dev *indio_dev, 74 struct iio_chan_spec const *channel, int *val, 75 int *val2, long mask) 76 { 77 struct tmp006_data *data = iio_priv(indio_dev); 78 s32 ret; 79 int cr; 80 81 switch (mask) { 82 case IIO_CHAN_INFO_RAW: 83 if (channel->type == IIO_VOLTAGE) { 84 /* LSB is 156.25 nV */ 85 ret = tmp006_read_measurement(data, TMP006_VOBJECT); 86 if (ret < 0) 87 return ret; 88 *val = sign_extend32(ret, 15); 89 } else if (channel->type == IIO_TEMP) { 90 /* LSB is 0.03125 degrees Celsius */ 91 ret = tmp006_read_measurement(data, TMP006_TAMBIENT); 92 if (ret < 0) 93 return ret; 94 *val = sign_extend32(ret, 15) >> TMP006_TAMBIENT_SHIFT; 95 } else { 96 break; 97 } 98 return IIO_VAL_INT; 99 case IIO_CHAN_INFO_SCALE: 100 if (channel->type == IIO_VOLTAGE) { 101 *val = 0; 102 *val2 = 156250; 103 } else if (channel->type == IIO_TEMP) { 104 *val = 31; 105 *val2 = 250000; 106 } else { 107 break; 108 } 109 return IIO_VAL_INT_PLUS_MICRO; 110 case IIO_CHAN_INFO_SAMP_FREQ: 111 cr = (data->config & TMP006_CONFIG_CR_MASK) 112 >> TMP006_CONFIG_CR_SHIFT; 113 *val = tmp006_freqs[cr][0]; 114 *val2 = tmp006_freqs[cr][1]; 115 return IIO_VAL_INT_PLUS_MICRO; 116 default: 117 break; 118 } 119 120 return -EINVAL; 121 } 122 123 static int tmp006_write_raw(struct iio_dev *indio_dev, 124 struct iio_chan_spec const *chan, 125 int val, 126 int val2, 127 long mask) 128 { 129 struct tmp006_data *data = iio_priv(indio_dev); 130 int i; 131 132 if (mask != IIO_CHAN_INFO_SAMP_FREQ) 133 return -EINVAL; 134 135 for (i = 0; i < ARRAY_SIZE(tmp006_freqs); i++) 136 if ((val == tmp006_freqs[i][0]) && 137 (val2 == tmp006_freqs[i][1])) { 138 data->config &= ~TMP006_CONFIG_CR_MASK; 139 data->config |= i << TMP006_CONFIG_CR_SHIFT; 140 141 return i2c_smbus_write_word_swapped(data->client, 142 TMP006_CONFIG, 143 data->config); 144 145 } 146 return -EINVAL; 147 } 148 149 static IIO_CONST_ATTR(sampling_frequency_available, "4 2 1 0.5 0.25"); 150 151 static struct attribute *tmp006_attributes[] = { 152 &iio_const_attr_sampling_frequency_available.dev_attr.attr, 153 NULL 154 }; 155 156 static const struct attribute_group tmp006_attribute_group = { 157 .attrs = tmp006_attributes, 158 }; 159 160 static const struct iio_chan_spec tmp006_channels[] = { 161 { 162 .type = IIO_VOLTAGE, 163 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 164 BIT(IIO_CHAN_INFO_SCALE), 165 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), 166 }, 167 { 168 .type = IIO_TEMP, 169 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 170 BIT(IIO_CHAN_INFO_SCALE), 171 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), 172 } 173 }; 174 175 static const struct iio_info tmp006_info = { 176 .read_raw = tmp006_read_raw, 177 .write_raw = tmp006_write_raw, 178 .attrs = &tmp006_attribute_group, 179 }; 180 181 static bool tmp006_check_identification(struct i2c_client *client) 182 { 183 int mid, did; 184 185 mid = i2c_smbus_read_word_swapped(client, TMP006_MANUFACTURER_ID); 186 if (mid < 0) 187 return false; 188 189 did = i2c_smbus_read_word_swapped(client, TMP006_DEVICE_ID); 190 if (did < 0) 191 return false; 192 193 return mid == TMP006_MANUFACTURER_MAGIC && did == TMP006_DEVICE_MAGIC; 194 } 195 196 static int tmp006_power(struct device *dev, bool up) 197 { 198 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 199 struct tmp006_data *data = iio_priv(indio_dev); 200 201 if (up) 202 data->config |= TMP006_CONFIG_MOD_MASK; 203 else 204 data->config &= ~TMP006_CONFIG_MOD_MASK; 205 206 return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG, 207 data->config); 208 } 209 210 static void tmp006_powerdown_cleanup(void *dev) 211 { 212 tmp006_power(dev, false); 213 } 214 215 static int tmp006_probe(struct i2c_client *client, 216 const struct i2c_device_id *id) 217 { 218 struct iio_dev *indio_dev; 219 struct tmp006_data *data; 220 int ret; 221 222 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) 223 return -EOPNOTSUPP; 224 225 if (!tmp006_check_identification(client)) { 226 dev_err(&client->dev, "no TMP006 sensor\n"); 227 return -ENODEV; 228 } 229 230 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); 231 if (!indio_dev) 232 return -ENOMEM; 233 234 data = iio_priv(indio_dev); 235 i2c_set_clientdata(client, indio_dev); 236 data->client = client; 237 238 indio_dev->name = dev_name(&client->dev); 239 indio_dev->modes = INDIO_DIRECT_MODE; 240 indio_dev->info = &tmp006_info; 241 242 indio_dev->channels = tmp006_channels; 243 indio_dev->num_channels = ARRAY_SIZE(tmp006_channels); 244 245 ret = i2c_smbus_read_word_swapped(data->client, TMP006_CONFIG); 246 if (ret < 0) 247 return ret; 248 data->config = ret; 249 250 if ((ret & TMP006_CONFIG_MOD_MASK) != TMP006_CONFIG_MOD_MASK) { 251 ret = tmp006_power(&client->dev, true); 252 if (ret < 0) 253 return ret; 254 } 255 256 ret = devm_add_action_or_reset(&client->dev, tmp006_powerdown_cleanup, 257 &client->dev); 258 if (ret < 0) 259 return ret; 260 261 return devm_iio_device_register(&client->dev, indio_dev); 262 } 263 264 #ifdef CONFIG_PM_SLEEP 265 static int tmp006_suspend(struct device *dev) 266 { 267 return tmp006_power(dev, false); 268 } 269 270 static int tmp006_resume(struct device *dev) 271 { 272 return tmp006_power(dev, true); 273 } 274 #endif 275 276 static SIMPLE_DEV_PM_OPS(tmp006_pm_ops, tmp006_suspend, tmp006_resume); 277 278 static const struct i2c_device_id tmp006_id[] = { 279 { "tmp006", 0 }, 280 { } 281 }; 282 MODULE_DEVICE_TABLE(i2c, tmp006_id); 283 284 static struct i2c_driver tmp006_driver = { 285 .driver = { 286 .name = "tmp006", 287 .pm = &tmp006_pm_ops, 288 }, 289 .probe = tmp006_probe, 290 .id_table = tmp006_id, 291 }; 292 module_i2c_driver(tmp006_driver); 293 294 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); 295 MODULE_DESCRIPTION("TI TMP006 IR thermopile sensor driver"); 296 MODULE_LICENSE("GPL"); 297