1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * tmp006.c - Support for TI TMP006 IR thermopile sensor 4 * 5 * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net> 6 * 7 * Driver for the Texas Instruments I2C 16-bit IR thermopile sensor 8 * 9 * (7-bit I2C slave address 0x40, changeable via ADR pins) 10 * 11 * TODO: data ready irq 12 */ 13 14 #include <linux/err.h> 15 #include <linux/i2c.h> 16 #include <linux/delay.h> 17 #include <linux/module.h> 18 #include <linux/mod_devicetable.h> 19 #include <linux/pm.h> 20 #include <linux/bitops.h> 21 22 #include <linux/iio/iio.h> 23 #include <linux/iio/sysfs.h> 24 25 #define TMP006_VOBJECT 0x00 26 #define TMP006_TAMBIENT 0x01 27 #define TMP006_CONFIG 0x02 28 #define TMP006_MANUFACTURER_ID 0xfe 29 #define TMP006_DEVICE_ID 0xff 30 31 #define TMP006_TAMBIENT_SHIFT 2 32 33 #define TMP006_CONFIG_RESET BIT(15) 34 #define TMP006_CONFIG_DRDY_EN BIT(8) 35 #define TMP006_CONFIG_DRDY BIT(7) 36 37 #define TMP006_CONFIG_MOD_MASK GENMASK(14, 12) 38 39 #define TMP006_CONFIG_CR_MASK GENMASK(11, 9) 40 #define TMP006_CONFIG_CR_SHIFT 9 41 42 #define TMP006_MANUFACTURER_MAGIC 0x5449 43 #define TMP006_DEVICE_MAGIC 0x0067 44 45 struct tmp006_data { 46 struct i2c_client *client; 47 u16 config; 48 }; 49 50 static int tmp006_read_measurement(struct tmp006_data *data, u8 reg) 51 { 52 s32 ret; 53 int tries = 50; 54 55 while (tries-- > 0) { 56 ret = i2c_smbus_read_word_swapped(data->client, 57 TMP006_CONFIG); 58 if (ret < 0) 59 return ret; 60 if (ret & TMP006_CONFIG_DRDY) 61 break; 62 msleep(100); 63 } 64 65 if (tries < 0) 66 return -EIO; 67 68 return i2c_smbus_read_word_swapped(data->client, reg); 69 } 70 71 static const int tmp006_freqs[5][2] = { {4, 0}, {2, 0}, {1, 0}, 72 {0, 500000}, {0, 250000} }; 73 74 static int tmp006_read_raw(struct iio_dev *indio_dev, 75 struct iio_chan_spec const *channel, int *val, 76 int *val2, long mask) 77 { 78 struct tmp006_data *data = iio_priv(indio_dev); 79 s32 ret; 80 int cr; 81 82 switch (mask) { 83 case IIO_CHAN_INFO_RAW: 84 if (channel->type == IIO_VOLTAGE) { 85 /* LSB is 156.25 nV */ 86 ret = tmp006_read_measurement(data, TMP006_VOBJECT); 87 if (ret < 0) 88 return ret; 89 *val = sign_extend32(ret, 15); 90 } else if (channel->type == IIO_TEMP) { 91 /* LSB is 0.03125 degrees Celsius */ 92 ret = tmp006_read_measurement(data, TMP006_TAMBIENT); 93 if (ret < 0) 94 return ret; 95 *val = sign_extend32(ret, 15) >> TMP006_TAMBIENT_SHIFT; 96 } else { 97 break; 98 } 99 return IIO_VAL_INT; 100 case IIO_CHAN_INFO_SCALE: 101 if (channel->type == IIO_VOLTAGE) { 102 *val = 0; 103 *val2 = 156250; 104 } else if (channel->type == IIO_TEMP) { 105 *val = 31; 106 *val2 = 250000; 107 } else { 108 break; 109 } 110 return IIO_VAL_INT_PLUS_MICRO; 111 case IIO_CHAN_INFO_SAMP_FREQ: 112 cr = (data->config & TMP006_CONFIG_CR_MASK) 113 >> TMP006_CONFIG_CR_SHIFT; 114 *val = tmp006_freqs[cr][0]; 115 *val2 = tmp006_freqs[cr][1]; 116 return IIO_VAL_INT_PLUS_MICRO; 117 default: 118 break; 119 } 120 121 return -EINVAL; 122 } 123 124 static int tmp006_write_raw(struct iio_dev *indio_dev, 125 struct iio_chan_spec const *chan, 126 int val, 127 int val2, 128 long mask) 129 { 130 struct tmp006_data *data = iio_priv(indio_dev); 131 int i; 132 133 if (mask != IIO_CHAN_INFO_SAMP_FREQ) 134 return -EINVAL; 135 136 for (i = 0; i < ARRAY_SIZE(tmp006_freqs); i++) 137 if ((val == tmp006_freqs[i][0]) && 138 (val2 == tmp006_freqs[i][1])) { 139 data->config &= ~TMP006_CONFIG_CR_MASK; 140 data->config |= i << TMP006_CONFIG_CR_SHIFT; 141 142 return i2c_smbus_write_word_swapped(data->client, 143 TMP006_CONFIG, 144 data->config); 145 146 } 147 return -EINVAL; 148 } 149 150 static IIO_CONST_ATTR(sampling_frequency_available, "4 2 1 0.5 0.25"); 151 152 static struct attribute *tmp006_attributes[] = { 153 &iio_const_attr_sampling_frequency_available.dev_attr.attr, 154 NULL 155 }; 156 157 static const struct attribute_group tmp006_attribute_group = { 158 .attrs = tmp006_attributes, 159 }; 160 161 static const struct iio_chan_spec tmp006_channels[] = { 162 { 163 .type = IIO_VOLTAGE, 164 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 165 BIT(IIO_CHAN_INFO_SCALE), 166 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), 167 }, 168 { 169 .type = IIO_TEMP, 170 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 171 BIT(IIO_CHAN_INFO_SCALE), 172 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), 173 } 174 }; 175 176 static const struct iio_info tmp006_info = { 177 .read_raw = tmp006_read_raw, 178 .write_raw = tmp006_write_raw, 179 .attrs = &tmp006_attribute_group, 180 }; 181 182 static bool tmp006_check_identification(struct i2c_client *client) 183 { 184 int mid, did; 185 186 mid = i2c_smbus_read_word_swapped(client, TMP006_MANUFACTURER_ID); 187 if (mid < 0) 188 return false; 189 190 did = i2c_smbus_read_word_swapped(client, TMP006_DEVICE_ID); 191 if (did < 0) 192 return false; 193 194 return mid == TMP006_MANUFACTURER_MAGIC && did == TMP006_DEVICE_MAGIC; 195 } 196 197 static int tmp006_power(struct device *dev, bool up) 198 { 199 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 200 struct tmp006_data *data = iio_priv(indio_dev); 201 202 if (up) 203 data->config |= TMP006_CONFIG_MOD_MASK; 204 else 205 data->config &= ~TMP006_CONFIG_MOD_MASK; 206 207 return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG, 208 data->config); 209 } 210 211 static void tmp006_powerdown_cleanup(void *dev) 212 { 213 tmp006_power(dev, false); 214 } 215 216 static int tmp006_probe(struct i2c_client *client) 217 { 218 struct iio_dev *indio_dev; 219 struct tmp006_data *data; 220 int ret; 221 222 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) 223 return -EOPNOTSUPP; 224 225 if (!tmp006_check_identification(client)) { 226 dev_err(&client->dev, "no TMP006 sensor\n"); 227 return -ENODEV; 228 } 229 230 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); 231 if (!indio_dev) 232 return -ENOMEM; 233 234 data = iio_priv(indio_dev); 235 i2c_set_clientdata(client, indio_dev); 236 data->client = client; 237 238 indio_dev->name = dev_name(&client->dev); 239 indio_dev->modes = INDIO_DIRECT_MODE; 240 indio_dev->info = &tmp006_info; 241 242 indio_dev->channels = tmp006_channels; 243 indio_dev->num_channels = ARRAY_SIZE(tmp006_channels); 244 245 ret = i2c_smbus_read_word_swapped(data->client, TMP006_CONFIG); 246 if (ret < 0) 247 return ret; 248 data->config = ret; 249 250 if ((ret & TMP006_CONFIG_MOD_MASK) != TMP006_CONFIG_MOD_MASK) { 251 ret = tmp006_power(&client->dev, true); 252 if (ret < 0) 253 return ret; 254 } 255 256 ret = devm_add_action_or_reset(&client->dev, tmp006_powerdown_cleanup, 257 &client->dev); 258 if (ret < 0) 259 return ret; 260 261 return devm_iio_device_register(&client->dev, indio_dev); 262 } 263 264 static int tmp006_suspend(struct device *dev) 265 { 266 return tmp006_power(dev, false); 267 } 268 269 static int tmp006_resume(struct device *dev) 270 { 271 return tmp006_power(dev, true); 272 } 273 274 static DEFINE_SIMPLE_DEV_PM_OPS(tmp006_pm_ops, tmp006_suspend, tmp006_resume); 275 276 static const struct of_device_id tmp006_of_match[] = { 277 { .compatible = "ti,tmp006" }, 278 { } 279 }; 280 MODULE_DEVICE_TABLE(of, tmp006_of_match); 281 282 static const struct i2c_device_id tmp006_id[] = { 283 { "tmp006", 0 }, 284 { } 285 }; 286 MODULE_DEVICE_TABLE(i2c, tmp006_id); 287 288 static struct i2c_driver tmp006_driver = { 289 .driver = { 290 .name = "tmp006", 291 .of_match_table = tmp006_of_match, 292 .pm = pm_sleep_ptr(&tmp006_pm_ops), 293 }, 294 .probe = tmp006_probe, 295 .id_table = tmp006_id, 296 }; 297 module_i2c_driver(tmp006_driver); 298 299 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); 300 MODULE_DESCRIPTION("TI TMP006 IR thermopile sensor driver"); 301 MODULE_LICENSE("GPL"); 302