1 // SPDX-License-Identifier: GPL-2.0-only
2 
3 /*
4  * Copyright (c) Linumiz 2021
5  *
6  * max31865.c - Maxim MAX31865 RTD-to-Digital Converter sensor driver
7  *
8  * Author: Navin Sankar Velliangiri <navin@linumiz.com>
9  */
10 
11 #include <linux/ctype.h>
12 #include <linux/delay.h>
13 #include <linux/err.h>
14 #include <linux/init.h>
15 #include <linux/module.h>
16 #include <linux/iio/iio.h>
17 #include <linux/iio/sysfs.h>
18 #include <linux/spi/spi.h>
19 #include <asm/unaligned.h>
20 
21 /*
22  * The MSB of the register value determines whether the following byte will
23  * be written or read. If it is 0, read will follow and if it is 1, write
24  * will follow.
25  */
26 #define MAX31865_RD_WR_BIT			BIT(7)
27 
28 #define MAX31865_CFG_VBIAS			BIT(7)
29 #define MAX31865_CFG_1SHOT			BIT(5)
30 #define MAX31865_3WIRE_RTD			BIT(4)
31 #define MAX31865_FAULT_STATUS_CLEAR		BIT(1)
32 #define MAX31865_FILTER_50HZ			BIT(0)
33 
34 /* The MAX31865 registers */
35 #define MAX31865_CFG_REG			0x00
36 #define MAX31865_RTD_MSB			0x01
37 #define MAX31865_FAULT_STATUS			0x07
38 
39 #define MAX31865_FAULT_OVUV			BIT(2)
40 
41 static const char max31865_show_samp_freq[] = "50 60";
42 
43 static const struct iio_chan_spec max31865_channels[] = {
44 	{	/* RTD Temperature */
45 		.type = IIO_TEMP,
46 		.info_mask_separate =
47 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)
48 	},
49 };
50 
51 struct max31865_data {
52 	struct spi_device *spi;
53 	struct mutex lock;
54 	bool filter_50hz;
55 	bool three_wire;
56 	u8 buf[2] ____cacheline_aligned;
57 };
58 
59 static int max31865_read(struct max31865_data *data, u8 reg,
60 			 unsigned int read_size)
61 {
62 	return spi_write_then_read(data->spi, &reg, 1, data->buf, read_size);
63 }
64 
65 static int max31865_write(struct max31865_data *data, size_t len)
66 {
67 	return spi_write(data->spi, data->buf, len);
68 }
69 
70 static int enable_bias(struct max31865_data *data)
71 {
72 	u8 cfg;
73 	int ret;
74 
75 	ret = max31865_read(data, MAX31865_CFG_REG, 1);
76 	if (ret)
77 		return ret;
78 
79 	cfg = data->buf[0];
80 
81 	data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT;
82 	data->buf[1] = cfg | MAX31865_CFG_VBIAS;
83 
84 	return max31865_write(data, 2);
85 }
86 
87 static int disable_bias(struct max31865_data *data)
88 {
89 	u8 cfg;
90 	int ret;
91 
92 	ret = max31865_read(data, MAX31865_CFG_REG, 1);
93 	if (ret)
94 		return ret;
95 
96 	cfg = data->buf[0];
97 	cfg &= ~MAX31865_CFG_VBIAS;
98 
99 	data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT;
100 	data->buf[1] = cfg;
101 
102 	return max31865_write(data, 2);
103 }
104 
105 static int max31865_rtd_read(struct max31865_data *data, int *val)
106 {
107 	u8 reg;
108 	int ret;
109 
110 	/* Enable BIAS to start the conversion */
111 	ret = enable_bias(data);
112 	if (ret)
113 		return ret;
114 
115 	/* wait 10.5ms before initiating the conversion */
116 	msleep(11);
117 
118 	ret = max31865_read(data, MAX31865_CFG_REG, 1);
119 	if (ret)
120 		return ret;
121 
122 	reg = data->buf[0];
123 	reg |= MAX31865_CFG_1SHOT | MAX31865_FAULT_STATUS_CLEAR;
124 	data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT;
125 	data->buf[1] = reg;
126 
127 	ret = max31865_write(data, 2);
128 	if (ret)
129 		return ret;
130 
131 	if (data->filter_50hz) {
132 		/* 50Hz filter mode requires 62.5ms to complete */
133 		msleep(63);
134 	} else {
135 		/* 60Hz filter mode requires 52ms to complete */
136 		msleep(52);
137 	}
138 
139 	ret = max31865_read(data, MAX31865_RTD_MSB, 2);
140 	if (ret)
141 		return ret;
142 
143 	*val = get_unaligned_be16(&data->buf) >> 1;
144 
145 	return disable_bias(data);
146 }
147 
148 static int max31865_read_raw(struct iio_dev *indio_dev,
149 			     struct iio_chan_spec const *chan,
150 			     int *val, int *val2, long mask)
151 {
152 	struct max31865_data *data = iio_priv(indio_dev);
153 	int ret;
154 
155 	switch (mask) {
156 	case IIO_CHAN_INFO_RAW:
157 		mutex_lock(&data->lock);
158 		ret = max31865_rtd_read(data, val);
159 		mutex_unlock(&data->lock);
160 		if (ret)
161 			return ret;
162 		return IIO_VAL_INT;
163 	case IIO_CHAN_INFO_SCALE:
164 		/* Temp. Data resolution is 0.03125 degree centigrade */
165 		*val = 31;
166 		*val2 = 250000; /* 1000 * 0.03125 */
167 		return IIO_VAL_INT_PLUS_MICRO;
168 	default:
169 		return -EINVAL;
170 	}
171 }
172 
173 static int max31865_init(struct max31865_data *data)
174 {
175 	u8 cfg;
176 	int ret;
177 
178 	ret = max31865_read(data, MAX31865_CFG_REG, 1);
179 	if (ret)
180 		return ret;
181 
182 	cfg = data->buf[0];
183 
184 	if (data->three_wire)
185 		/* 3-wire RTD connection */
186 		cfg |= MAX31865_3WIRE_RTD;
187 
188 	if (data->filter_50hz)
189 		/* 50Hz noise rejection filter */
190 		cfg |= MAX31865_FILTER_50HZ;
191 
192 	data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT;
193 	data->buf[1] = cfg;
194 
195 	return max31865_write(data, 2);
196 }
197 
198 static ssize_t show_fault(struct device *dev, u8 faultbit, char *buf)
199 {
200 	int ret;
201 	bool fault;
202 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
203 	struct max31865_data *data = iio_priv(indio_dev);
204 
205 	ret = max31865_read(data, MAX31865_FAULT_STATUS, 1);
206 	if (ret)
207 		return ret;
208 
209 	fault = data->buf[0] & faultbit;
210 
211 	return sprintf(buf, "%d\n", fault);
212 }
213 
214 static ssize_t show_fault_ovuv(struct device *dev,
215 			      struct device_attribute *attr,
216 			      char *buf)
217 {
218 	return show_fault(dev, MAX31865_FAULT_OVUV, buf);
219 }
220 
221 static ssize_t show_filter(struct device *dev,
222 			   struct device_attribute *attr,
223 			   char *buf)
224 {
225 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
226 	struct max31865_data *data = iio_priv(indio_dev);
227 
228 	return sprintf(buf, "%d\n", data->filter_50hz ? 50 : 60);
229 }
230 
231 static ssize_t set_filter(struct device *dev,
232 			  struct device_attribute *attr,
233 			  const char *buf,
234 			  size_t len)
235 {
236 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
237 	struct max31865_data *data = iio_priv(indio_dev);
238 	unsigned int freq;
239 	int ret;
240 
241 	ret = kstrtouint(buf, 10, &freq);
242 	if (ret)
243 		return ret;
244 
245 	switch (freq) {
246 	case 50:
247 		data->filter_50hz = true;
248 		break;
249 	case 60:
250 		data->filter_50hz = false;
251 		break;
252 	default:
253 		return -EINVAL;
254 	}
255 
256 	mutex_lock(&data->lock);
257 	ret = max31865_init(data);
258 	mutex_unlock(&data->lock);
259 	if (ret)
260 		return ret;
261 
262 	return len;
263 }
264 
265 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(max31865_show_samp_freq);
266 static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0);
267 static IIO_DEVICE_ATTR(in_filter_notch_center_frequency, 0644,
268 		    show_filter, set_filter, 0);
269 
270 static struct attribute *max31865_attributes[] = {
271 	&iio_dev_attr_fault_ovuv.dev_attr.attr,
272 	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
273 	&iio_dev_attr_in_filter_notch_center_frequency.dev_attr.attr,
274 	NULL,
275 };
276 
277 static const struct attribute_group max31865_group = {
278 	.attrs = max31865_attributes,
279 };
280 
281 static const struct iio_info max31865_info = {
282 	.read_raw = max31865_read_raw,
283 	.attrs = &max31865_group,
284 };
285 
286 static int max31865_probe(struct spi_device *spi)
287 {
288 	const struct spi_device_id *id = spi_get_device_id(spi);
289 	struct iio_dev *indio_dev;
290 	struct max31865_data *data;
291 	int ret;
292 
293 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data));
294 	if (!indio_dev)
295 		return -ENOMEM;
296 
297 	data = iio_priv(indio_dev);
298 	data->spi = spi;
299 	data->filter_50hz = false;
300 	mutex_init(&data->lock);
301 
302 	indio_dev->info = &max31865_info;
303 	indio_dev->name = id->name;
304 	indio_dev->modes = INDIO_DIRECT_MODE;
305 	indio_dev->channels = max31865_channels;
306 	indio_dev->num_channels = ARRAY_SIZE(max31865_channels);
307 
308 	if (of_property_read_bool(spi->dev.of_node, "maxim,3-wire")) {
309 		/* select 3 wire */
310 		data->three_wire = 1;
311 	} else {
312 		/* select 2 or 4 wire */
313 		data->three_wire = 0;
314 	}
315 
316 	ret = max31865_init(data);
317 	if (ret) {
318 		dev_err(&spi->dev, "error: Failed to configure max31865\n");
319 		return ret;
320 	}
321 
322 	return devm_iio_device_register(&spi->dev, indio_dev);
323 }
324 
325 static const struct spi_device_id max31865_id[] = {
326 	{ "max31865", 0 },
327 	{ }
328 };
329 MODULE_DEVICE_TABLE(spi, max31865_id);
330 
331 static const struct of_device_id max31865_of_match[] = {
332 	{ .compatible = "maxim,max31865" },
333 	{ }
334 };
335 MODULE_DEVICE_TABLE(of, max31865_of_match);
336 
337 static struct spi_driver max31865_driver = {
338 	.driver = {
339 		.name	= "max31865",
340 		.of_match_table = max31865_of_match,
341 	},
342 	.probe = max31865_probe,
343 	.id_table = max31865_id,
344 };
345 module_spi_driver(max31865_driver);
346 
347 MODULE_AUTHOR("Navin Sankar Velliangiri <navin@linumiz.com>");
348 MODULE_DESCRIPTION("Maxim MAX31865 RTD-to-Digital Converter sensor driver");
349 MODULE_LICENSE("GPL v2");
350