1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * PING: ultrasonic sensor for distance measuring by using only one GPIOs 4 * 5 * Copyright (c) 2019 Andreas Klinger <ak@it-klinger.de> 6 * 7 * For details about the devices see: 8 * http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf 9 * http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf 10 * 11 * the measurement cycle as timing diagram looks like: 12 * 13 * GPIO ___ ________________________ 14 * ping: __/ \____________/ \________________ 15 * ^ ^ ^ ^ 16 * |<->| interrupt interrupt 17 * udelay(5) (ts_rising) (ts_falling) 18 * |<---------------------->| 19 * . pulse time measured . 20 * . --> one round trip of ultra sonic waves 21 * ultra . . 22 * sonic _ _ _. . 23 * burst: _________/ \_/ \_/ \_________________________________________ 24 * . 25 * ultra . 26 * sonic _ _ _. 27 * echo: __________________________________/ \_/ \_/ \________________ 28 */ 29 #include <linux/err.h> 30 #include <linux/gpio/consumer.h> 31 #include <linux/kernel.h> 32 #include <linux/mod_devicetable.h> 33 #include <linux/module.h> 34 #include <linux/platform_device.h> 35 #include <linux/property.h> 36 #include <linux/sched.h> 37 #include <linux/interrupt.h> 38 #include <linux/delay.h> 39 #include <linux/iio/iio.h> 40 #include <linux/iio/sysfs.h> 41 42 struct ping_cfg { 43 unsigned long trigger_pulse_us; /* length of trigger pulse */ 44 int laserping_error; /* support error code in */ 45 /* pulse width of laser */ 46 /* ping sensors */ 47 s64 timeout_ns; /* timeout in ns */ 48 }; 49 50 struct ping_data { 51 struct device *dev; 52 struct gpio_desc *gpiod_ping; 53 struct mutex lock; 54 int irqnr; 55 ktime_t ts_rising; 56 ktime_t ts_falling; 57 struct completion rising; 58 struct completion falling; 59 const struct ping_cfg *cfg; 60 }; 61 62 static const struct ping_cfg pa_ping_cfg = { 63 .trigger_pulse_us = 5, 64 .laserping_error = 0, 65 .timeout_ns = 18500000, /* 3 meters */ 66 }; 67 68 static const struct ping_cfg pa_laser_ping_cfg = { 69 .trigger_pulse_us = 5, 70 .laserping_error = 1, 71 .timeout_ns = 15500000, /* 2 meters plus error codes */ 72 }; 73 74 static irqreturn_t ping_handle_irq(int irq, void *dev_id) 75 { 76 struct iio_dev *indio_dev = dev_id; 77 struct ping_data *data = iio_priv(indio_dev); 78 ktime_t now = ktime_get(); 79 80 if (gpiod_get_value(data->gpiod_ping)) { 81 data->ts_rising = now; 82 complete(&data->rising); 83 } else { 84 data->ts_falling = now; 85 complete(&data->falling); 86 } 87 88 return IRQ_HANDLED; 89 } 90 91 static int ping_read(struct iio_dev *indio_dev) 92 { 93 struct ping_data *data = iio_priv(indio_dev); 94 int ret; 95 ktime_t ktime_dt; 96 s64 dt_ns; 97 u32 time_ns, distance_mm; 98 struct platform_device *pdev = to_platform_device(data->dev); 99 100 /* 101 * just one read-echo-cycle can take place at a time 102 * ==> lock against concurrent reading calls 103 */ 104 mutex_lock(&data->lock); 105 106 reinit_completion(&data->rising); 107 reinit_completion(&data->falling); 108 109 gpiod_set_value(data->gpiod_ping, 1); 110 udelay(data->cfg->trigger_pulse_us); 111 gpiod_set_value(data->gpiod_ping, 0); 112 113 ret = gpiod_direction_input(data->gpiod_ping); 114 if (ret < 0) { 115 mutex_unlock(&data->lock); 116 return ret; 117 } 118 119 data->irqnr = gpiod_to_irq(data->gpiod_ping); 120 if (data->irqnr < 0) { 121 dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr); 122 mutex_unlock(&data->lock); 123 return data->irqnr; 124 } 125 126 ret = request_irq(data->irqnr, ping_handle_irq, 127 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, 128 pdev->name, indio_dev); 129 if (ret < 0) { 130 dev_err(data->dev, "request_irq: %d\n", ret); 131 mutex_unlock(&data->lock); 132 return ret; 133 } 134 135 /* it should not take more than 20 ms until echo is rising */ 136 ret = wait_for_completion_killable_timeout(&data->rising, HZ/50); 137 if (ret < 0) 138 goto err_reset_direction; 139 else if (ret == 0) { 140 ret = -ETIMEDOUT; 141 goto err_reset_direction; 142 } 143 144 /* it cannot take more than 50 ms until echo is falling */ 145 ret = wait_for_completion_killable_timeout(&data->falling, HZ/20); 146 if (ret < 0) 147 goto err_reset_direction; 148 else if (ret == 0) { 149 ret = -ETIMEDOUT; 150 goto err_reset_direction; 151 } 152 153 ktime_dt = ktime_sub(data->ts_falling, data->ts_rising); 154 155 free_irq(data->irqnr, indio_dev); 156 157 ret = gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW); 158 if (ret < 0) { 159 mutex_unlock(&data->lock); 160 return ret; 161 } 162 163 mutex_unlock(&data->lock); 164 165 dt_ns = ktime_to_ns(ktime_dt); 166 if (dt_ns > data->cfg->timeout_ns) { 167 dev_dbg(data->dev, "distance out of range: dt=%lldns\n", 168 dt_ns); 169 return -EIO; 170 } 171 172 time_ns = dt_ns; 173 174 /* 175 * read error code of laser ping sensor and give users chance to 176 * figure out error by using dynamic debugging 177 */ 178 if (data->cfg->laserping_error) { 179 if ((time_ns > 12500000) && (time_ns <= 13500000)) { 180 dev_dbg(data->dev, "target too close or to far\n"); 181 return -EIO; 182 } 183 if ((time_ns > 13500000) && (time_ns <= 14500000)) { 184 dev_dbg(data->dev, "internal sensor error\n"); 185 return -EIO; 186 } 187 if ((time_ns > 14500000) && (time_ns <= 15500000)) { 188 dev_dbg(data->dev, "internal sensor timeout\n"); 189 return -EIO; 190 } 191 } 192 193 /* 194 * the speed as function of the temperature is approximately: 195 * 196 * speed = 331,5 + 0,6 * Temp 197 * with Temp in °C 198 * and speed in m/s 199 * 200 * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the 201 * temperature 202 * 203 * therefore: 204 * time 343,5 time * 232 205 * distance = ------ * ------- = ------------ 206 * 10^6 2 1350800 207 * with time in ns 208 * and distance in mm (one way) 209 * 210 * because we limit to 3 meters the multiplication with 232 just 211 * fits into 32 bit 212 */ 213 distance_mm = time_ns * 232 / 1350800; 214 215 return distance_mm; 216 217 err_reset_direction: 218 free_irq(data->irqnr, indio_dev); 219 mutex_unlock(&data->lock); 220 221 if (gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW)) 222 dev_dbg(data->dev, "error in gpiod_direction_output\n"); 223 return ret; 224 } 225 226 static int ping_read_raw(struct iio_dev *indio_dev, 227 struct iio_chan_spec const *channel, int *val, 228 int *val2, long info) 229 { 230 int ret; 231 232 if (channel->type != IIO_DISTANCE) 233 return -EINVAL; 234 235 switch (info) { 236 case IIO_CHAN_INFO_RAW: 237 ret = ping_read(indio_dev); 238 if (ret < 0) 239 return ret; 240 *val = ret; 241 return IIO_VAL_INT; 242 case IIO_CHAN_INFO_SCALE: 243 /* 244 * maximum resolution in datasheet is 1 mm 245 * 1 LSB is 1 mm 246 */ 247 *val = 0; 248 *val2 = 1000; 249 return IIO_VAL_INT_PLUS_MICRO; 250 default: 251 return -EINVAL; 252 } 253 } 254 255 static const struct iio_info ping_iio_info = { 256 .read_raw = ping_read_raw, 257 }; 258 259 static const struct iio_chan_spec ping_chan_spec[] = { 260 { 261 .type = IIO_DISTANCE, 262 .info_mask_separate = 263 BIT(IIO_CHAN_INFO_RAW) | 264 BIT(IIO_CHAN_INFO_SCALE), 265 }, 266 }; 267 268 static const struct of_device_id of_ping_match[] = { 269 { .compatible = "parallax,ping", .data = &pa_ping_cfg }, 270 { .compatible = "parallax,laserping", .data = &pa_laser_ping_cfg }, 271 {}, 272 }; 273 274 MODULE_DEVICE_TABLE(of, of_ping_match); 275 276 static int ping_probe(struct platform_device *pdev) 277 { 278 struct device *dev = &pdev->dev; 279 struct ping_data *data; 280 struct iio_dev *indio_dev; 281 282 indio_dev = devm_iio_device_alloc(dev, sizeof(struct ping_data)); 283 if (!indio_dev) { 284 dev_err(dev, "failed to allocate IIO device\n"); 285 return -ENOMEM; 286 } 287 288 data = iio_priv(indio_dev); 289 data->dev = dev; 290 data->cfg = device_get_match_data(dev); 291 292 mutex_init(&data->lock); 293 init_completion(&data->rising); 294 init_completion(&data->falling); 295 296 data->gpiod_ping = devm_gpiod_get(dev, "ping", GPIOD_OUT_LOW); 297 if (IS_ERR(data->gpiod_ping)) { 298 dev_err(dev, "failed to get ping-gpios: err=%ld\n", 299 PTR_ERR(data->gpiod_ping)); 300 return PTR_ERR(data->gpiod_ping); 301 } 302 303 if (gpiod_cansleep(data->gpiod_ping)) { 304 dev_err(data->dev, "cansleep-GPIOs not supported\n"); 305 return -ENODEV; 306 } 307 308 platform_set_drvdata(pdev, indio_dev); 309 310 indio_dev->name = "ping"; 311 indio_dev->info = &ping_iio_info; 312 indio_dev->modes = INDIO_DIRECT_MODE; 313 indio_dev->channels = ping_chan_spec; 314 indio_dev->num_channels = ARRAY_SIZE(ping_chan_spec); 315 316 return devm_iio_device_register(dev, indio_dev); 317 } 318 319 static struct platform_driver ping_driver = { 320 .probe = ping_probe, 321 .driver = { 322 .name = "ping-gpio", 323 .of_match_table = of_ping_match, 324 }, 325 }; 326 327 module_platform_driver(ping_driver); 328 329 MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>"); 330 MODULE_DESCRIPTION("PING sensors for distance measuring using one GPIOs"); 331 MODULE_LICENSE("GPL"); 332 MODULE_ALIAS("platform:ping"); 333