xref: /openbmc/linux/drivers/iio/proximity/mb1232.c (revision aaa746ad)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * mb1232.c - Support for MaxBotix I2CXL-MaxSonar-EZ series ultrasonic
4  *   ranger with i2c interface
5  * actually tested with mb1232 type
6  *
7  * Copyright (c) 2019 Andreas Klinger <ak@it-klinger.de>
8  *
9  * For details about the device see:
10  * https://www.maxbotix.com/documents/I2CXL-MaxSonar-EZ_Datasheet.pdf
11  */
12 
13 #include <linux/bitops.h>
14 #include <linux/err.h>
15 #include <linux/i2c.h>
16 #include <linux/delay.h>
17 #include <linux/mod_devicetable.h>
18 #include <linux/module.h>
19 #include <linux/property.h>
20 
21 #include <linux/iio/iio.h>
22 #include <linux/iio/sysfs.h>
23 #include <linux/iio/buffer.h>
24 #include <linux/iio/trigger_consumer.h>
25 #include <linux/iio/triggered_buffer.h>
26 
27 /* registers of MaxSonar device */
28 #define MB1232_RANGE_COMMAND	0x51	/* Command for reading range */
29 #define MB1232_ADDR_UNLOCK_1	0xAA	/* Command 1 for changing address */
30 #define MB1232_ADDR_UNLOCK_2	0xA5	/* Command 2 for changing address */
31 
32 struct mb1232_data {
33 	struct i2c_client	*client;
34 
35 	struct mutex		lock;
36 
37 	/*
38 	 * optionally a gpio can be used to announce when ranging has
39 	 * finished
40 	 * since we are just using the falling trigger of it we request
41 	 * only the interrupt for announcing when data is ready to be read
42 	 */
43 	struct completion	ranging;
44 	int			irqnr;
45 	/* Ensure correct alignment of data to push to IIO buffer */
46 	struct {
47 		s16 distance;
48 		s64 ts __aligned(8);
49 	} scan;
50 };
51 
52 static irqreturn_t mb1232_handle_irq(int irq, void *dev_id)
53 {
54 	struct iio_dev *indio_dev = dev_id;
55 	struct mb1232_data *data = iio_priv(indio_dev);
56 
57 	complete(&data->ranging);
58 
59 	return IRQ_HANDLED;
60 }
61 
62 static s16 mb1232_read_distance(struct mb1232_data *data)
63 {
64 	struct i2c_client *client = data->client;
65 	int ret;
66 	s16 distance;
67 	__be16 buf;
68 
69 	mutex_lock(&data->lock);
70 
71 	reinit_completion(&data->ranging);
72 
73 	ret = i2c_smbus_write_byte(client, MB1232_RANGE_COMMAND);
74 	if (ret < 0) {
75 		dev_err(&client->dev, "write command - err: %d\n", ret);
76 		goto error_unlock;
77 	}
78 
79 	if (data->irqnr >= 0) {
80 		/* it cannot take more than 100 ms */
81 		ret = wait_for_completion_killable_timeout(&data->ranging,
82 									HZ/10);
83 		if (ret < 0)
84 			goto error_unlock;
85 		else if (ret == 0) {
86 			ret = -ETIMEDOUT;
87 			goto error_unlock;
88 		}
89 	} else {
90 		/* use simple sleep if announce irq is not connected */
91 		msleep(15);
92 	}
93 
94 	ret = i2c_master_recv(client, (char *)&buf, sizeof(buf));
95 	if (ret < 0) {
96 		dev_err(&client->dev, "i2c_master_recv: ret=%d\n", ret);
97 		goto error_unlock;
98 	}
99 
100 	distance = __be16_to_cpu(buf);
101 	/* check for not returning misleading error codes */
102 	if (distance < 0) {
103 		dev_err(&client->dev, "distance=%d\n", distance);
104 		ret = -EINVAL;
105 		goto error_unlock;
106 	}
107 
108 	mutex_unlock(&data->lock);
109 
110 	return distance;
111 
112 error_unlock:
113 	mutex_unlock(&data->lock);
114 
115 	return ret;
116 }
117 
118 static irqreturn_t mb1232_trigger_handler(int irq, void *p)
119 {
120 	struct iio_poll_func *pf = p;
121 	struct iio_dev *indio_dev = pf->indio_dev;
122 	struct mb1232_data *data = iio_priv(indio_dev);
123 
124 	data->scan.distance = mb1232_read_distance(data);
125 	if (data->scan.distance < 0)
126 		goto err;
127 
128 	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
129 					   pf->timestamp);
130 
131 err:
132 	iio_trigger_notify_done(indio_dev->trig);
133 	return IRQ_HANDLED;
134 }
135 
136 static int mb1232_read_raw(struct iio_dev *indio_dev,
137 			    struct iio_chan_spec const *channel, int *val,
138 			    int *val2, long mask)
139 {
140 	struct mb1232_data *data = iio_priv(indio_dev);
141 	int ret;
142 
143 	if (channel->type != IIO_DISTANCE)
144 		return -EINVAL;
145 
146 	switch (mask) {
147 	case IIO_CHAN_INFO_RAW:
148 		ret = mb1232_read_distance(data);
149 		if (ret < 0)
150 			return ret;
151 		*val = ret;
152 		return IIO_VAL_INT;
153 	case IIO_CHAN_INFO_SCALE:
154 		/* 1 LSB is 1 cm */
155 		*val = 0;
156 		*val2 = 10000;
157 		return IIO_VAL_INT_PLUS_MICRO;
158 	default:
159 		return -EINVAL;
160 	}
161 }
162 
163 static const struct iio_chan_spec mb1232_channels[] = {
164 	{
165 		.type = IIO_DISTANCE,
166 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
167 				      BIT(IIO_CHAN_INFO_SCALE),
168 		.scan_index = 0,
169 		.scan_type = {
170 			.sign = 's',
171 			.realbits = 16,
172 			.storagebits = 16,
173 			.endianness = IIO_CPU,
174 		},
175 	},
176 	IIO_CHAN_SOFT_TIMESTAMP(1),
177 };
178 
179 static const struct iio_info mb1232_info = {
180 	.read_raw = mb1232_read_raw,
181 };
182 
183 static int mb1232_probe(struct i2c_client *client)
184 {
185 	const struct i2c_device_id *id = i2c_client_get_device_id(client);
186 	struct iio_dev *indio_dev;
187 	struct mb1232_data *data;
188 	int ret;
189 	struct device *dev = &client->dev;
190 
191 	if (!i2c_check_functionality(client->adapter,
192 					I2C_FUNC_SMBUS_READ_BYTE |
193 					I2C_FUNC_SMBUS_WRITE_BYTE))
194 		return -ENODEV;
195 
196 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
197 	if (!indio_dev)
198 		return -ENOMEM;
199 
200 	data = iio_priv(indio_dev);
201 	i2c_set_clientdata(client, indio_dev);
202 	data->client = client;
203 
204 	indio_dev->info = &mb1232_info;
205 	indio_dev->name = id->name;
206 	indio_dev->modes = INDIO_DIRECT_MODE;
207 	indio_dev->channels = mb1232_channels;
208 	indio_dev->num_channels = ARRAY_SIZE(mb1232_channels);
209 
210 	mutex_init(&data->lock);
211 
212 	init_completion(&data->ranging);
213 
214 	data->irqnr = fwnode_irq_get(dev_fwnode(&client->dev), 0);
215 	if (data->irqnr <= 0) {
216 		/* usage of interrupt is optional */
217 		data->irqnr = -1;
218 	} else {
219 		ret = devm_request_irq(dev, data->irqnr, mb1232_handle_irq,
220 				IRQF_TRIGGER_FALLING, id->name, indio_dev);
221 		if (ret < 0) {
222 			dev_err(dev, "request_irq: %d\n", ret);
223 			return ret;
224 		}
225 	}
226 
227 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
228 			iio_pollfunc_store_time, mb1232_trigger_handler, NULL);
229 	if (ret < 0) {
230 		dev_err(dev, "setup of iio triggered buffer failed\n");
231 		return ret;
232 	}
233 
234 	return devm_iio_device_register(dev, indio_dev);
235 }
236 
237 static const struct of_device_id of_mb1232_match[] = {
238 	{ .compatible = "maxbotix,mb1202", },
239 	{ .compatible = "maxbotix,mb1212", },
240 	{ .compatible = "maxbotix,mb1222", },
241 	{ .compatible = "maxbotix,mb1232", },
242 	{ .compatible = "maxbotix,mb1242", },
243 	{ .compatible = "maxbotix,mb7040", },
244 	{ .compatible = "maxbotix,mb7137", },
245 	{},
246 };
247 
248 MODULE_DEVICE_TABLE(of, of_mb1232_match);
249 
250 static const struct i2c_device_id mb1232_id[] = {
251 	{ "maxbotix-mb1202", },
252 	{ "maxbotix-mb1212", },
253 	{ "maxbotix-mb1222", },
254 	{ "maxbotix-mb1232", },
255 	{ "maxbotix-mb1242", },
256 	{ "maxbotix-mb7040", },
257 	{ "maxbotix-mb7137", },
258 	{ }
259 };
260 MODULE_DEVICE_TABLE(i2c, mb1232_id);
261 
262 static struct i2c_driver mb1232_driver = {
263 	.driver = {
264 		.name	= "maxbotix-mb1232",
265 		.of_match_table	= of_mb1232_match,
266 	},
267 	.probe_new = mb1232_probe,
268 	.id_table = mb1232_id,
269 };
270 module_i2c_driver(mb1232_driver);
271 
272 MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
273 MODULE_DESCRIPTION("Maxbotix I2CXL-MaxSonar i2c ultrasonic ranger driver");
274 MODULE_LICENSE("GPL");
275