xref: /openbmc/linux/drivers/iio/proximity/irsd200.c (revision 479965a2)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Driver for Murata IRS-D200 PIR sensor.
4  *
5  * Copyright (C) 2023 Axis Communications AB
6  */
7 
8 #include <asm/unaligned.h>
9 #include <linux/bitfield.h>
10 #include <linux/gpio.h>
11 #include <linux/i2c.h>
12 #include <linux/module.h>
13 #include <linux/regmap.h>
14 
15 #include <linux/iio/buffer.h>
16 #include <linux/iio/events.h>
17 #include <linux/iio/iio.h>
18 #include <linux/iio/trigger.h>
19 #include <linux/iio/trigger_consumer.h>
20 #include <linux/iio/triggered_buffer.h>
21 #include <linux/iio/types.h>
22 
23 #define IRS_DRV_NAME "irsd200"
24 
25 /* Registers. */
26 #define IRS_REG_OP		0x00	/* Operation mode. */
27 #define IRS_REG_DATA_LO		0x02	/* Sensor data LSB. */
28 #define IRS_REG_DATA_HI		0x03	/* Sensor data MSB. */
29 #define IRS_REG_STATUS		0x04	/* Interrupt status. */
30 #define IRS_REG_COUNT		0x05	/* Count of exceeding threshold. */
31 #define IRS_REG_DATA_RATE	0x06	/* Output data rate. */
32 #define IRS_REG_FILTER		0x07	/* High-pass and low-pass filter. */
33 #define IRS_REG_INTR		0x09	/* Interrupt mode. */
34 #define IRS_REG_NR_COUNT	0x0a	/* Number of counts before interrupt. */
35 #define IRS_REG_THR_HI		0x0b	/* Upper threshold. */
36 #define IRS_REG_THR_LO		0x0c	/* Lower threshold. */
37 #define IRS_REG_TIMER_LO	0x0d	/* Timer setting LSB. */
38 #define IRS_REG_TIMER_HI	0x0e	/* Timer setting MSB. */
39 
40 /* Interrupt status bits. */
41 #define IRS_INTR_DATA		0	/* Data update. */
42 #define IRS_INTR_TIMER		1	/* Timer expiration. */
43 #define IRS_INTR_COUNT_THR_AND	2	/* Count "AND" threshold. */
44 #define IRS_INTR_COUNT_THR_OR	3	/* Count "OR" threshold. */
45 
46 /* Operation states. */
47 #define IRS_OP_ACTIVE		0x00
48 #define IRS_OP_SLEEP		0x01
49 
50 /*
51  * Quantization scale value for threshold. Used for conversion from/to register
52  * value.
53  */
54 #define IRS_THR_QUANT_SCALE	128
55 
56 #define IRS_UPPER_COUNT(count)	FIELD_GET(GENMASK(7, 4), count)
57 #define IRS_LOWER_COUNT(count)	FIELD_GET(GENMASK(3, 0), count)
58 
59 /* Index corresponds to the value of IRS_REG_DATA_RATE register. */
60 static const int irsd200_data_rates[] = {
61 	50,
62 	100,
63 };
64 
65 /* Index corresponds to the (field) value of IRS_REG_FILTER register. */
66 static const unsigned int irsd200_lp_filter_freq[] = {
67 	10,
68 	7,
69 };
70 
71 /*
72  * Index corresponds to the (field) value of IRS_REG_FILTER register. Note that
73  * this represents a fractional value (e.g the first value corresponds to 3 / 10
74  * = 0.3 Hz).
75  */
76 static const unsigned int irsd200_hp_filter_freq[][2] = {
77 	{ 3, 10 },
78 	{ 5, 10 },
79 };
80 
81 /* Register fields. */
82 enum irsd200_regfield {
83 	/* Data interrupt. */
84 	IRS_REGF_INTR_DATA,
85 	/* Timer interrupt. */
86 	IRS_REGF_INTR_TIMER,
87 	/* AND count threshold interrupt. */
88 	IRS_REGF_INTR_COUNT_THR_AND,
89 	/* OR count threshold interrupt. */
90 	IRS_REGF_INTR_COUNT_THR_OR,
91 
92 	/* Low-pass filter frequency. */
93 	IRS_REGF_LP_FILTER,
94 	/* High-pass filter frequency. */
95 	IRS_REGF_HP_FILTER,
96 
97 	/* Sentinel value. */
98 	IRS_REGF_MAX
99 };
100 
101 static const struct reg_field irsd200_regfields[] = {
102 	[IRS_REGF_INTR_DATA] =
103 		REG_FIELD(IRS_REG_INTR, IRS_INTR_DATA, IRS_INTR_DATA),
104 	[IRS_REGF_INTR_TIMER] =
105 		REG_FIELD(IRS_REG_INTR, IRS_INTR_TIMER, IRS_INTR_TIMER),
106 	[IRS_REGF_INTR_COUNT_THR_AND] = REG_FIELD(
107 		IRS_REG_INTR, IRS_INTR_COUNT_THR_AND, IRS_INTR_COUNT_THR_AND),
108 	[IRS_REGF_INTR_COUNT_THR_OR] = REG_FIELD(
109 		IRS_REG_INTR, IRS_INTR_COUNT_THR_OR, IRS_INTR_COUNT_THR_OR),
110 
111 	[IRS_REGF_LP_FILTER] = REG_FIELD(IRS_REG_FILTER, 1, 1),
112 	[IRS_REGF_HP_FILTER] = REG_FIELD(IRS_REG_FILTER, 0, 0),
113 };
114 
115 static const struct regmap_config irsd200_regmap_config = {
116 	.reg_bits = 8,
117 	.val_bits = 8,
118 	.max_register = IRS_REG_TIMER_HI,
119 };
120 
121 struct irsd200_data {
122 	struct regmap *regmap;
123 	struct regmap_field *regfields[IRS_REGF_MAX];
124 	struct device *dev;
125 };
126 
127 static int irsd200_setup(struct irsd200_data *data)
128 {
129 	unsigned int val;
130 	int ret;
131 
132 	/* Disable all interrupt sources. */
133 	ret = regmap_write(data->regmap, IRS_REG_INTR, 0);
134 	if (ret) {
135 		dev_err(data->dev, "Could not set interrupt sources (%d)\n",
136 			ret);
137 		return ret;
138 	}
139 
140 	/* Set operation to active. */
141 	ret = regmap_write(data->regmap, IRS_REG_OP, IRS_OP_ACTIVE);
142 	if (ret) {
143 		dev_err(data->dev, "Could not set operation mode (%d)\n", ret);
144 		return ret;
145 	}
146 
147 	/* Clear threshold count. */
148 	ret = regmap_read(data->regmap, IRS_REG_COUNT, &val);
149 	if (ret) {
150 		dev_err(data->dev, "Could not clear threshold count (%d)\n",
151 			ret);
152 		return ret;
153 	}
154 
155 	/* Clear status. */
156 	ret = regmap_write(data->regmap, IRS_REG_STATUS, 0x0f);
157 	if (ret) {
158 		dev_err(data->dev, "Could not clear status (%d)\n", ret);
159 		return ret;
160 	}
161 
162 	return 0;
163 }
164 
165 static int irsd200_read_threshold(struct irsd200_data *data,
166 				  enum iio_event_direction dir, int *val)
167 {
168 	unsigned int regval;
169 	unsigned int reg;
170 	int scale;
171 	int ret;
172 
173 	/* Set quantization scale. */
174 	if (dir == IIO_EV_DIR_RISING) {
175 		scale = IRS_THR_QUANT_SCALE;
176 		reg = IRS_REG_THR_HI;
177 	} else if (dir == IIO_EV_DIR_FALLING) {
178 		scale = -IRS_THR_QUANT_SCALE;
179 		reg = IRS_REG_THR_LO;
180 	} else {
181 		return -EINVAL;
182 	}
183 
184 	ret = regmap_read(data->regmap, reg, &regval);
185 	if (ret) {
186 		dev_err(data->dev, "Could not read threshold (%d)\n", ret);
187 		return ret;
188 	}
189 
190 	*val = ((int)regval) * scale;
191 
192 	return 0;
193 }
194 
195 static int irsd200_write_threshold(struct irsd200_data *data,
196 				   enum iio_event_direction dir, int val)
197 {
198 	unsigned int regval;
199 	unsigned int reg;
200 	int scale;
201 	int ret;
202 
203 	/* Set quantization scale. */
204 	if (dir == IIO_EV_DIR_RISING) {
205 		if (val < 0)
206 			return -ERANGE;
207 
208 		scale = IRS_THR_QUANT_SCALE;
209 		reg = IRS_REG_THR_HI;
210 	} else if (dir == IIO_EV_DIR_FALLING) {
211 		if (val > 0)
212 			return -ERANGE;
213 
214 		scale = -IRS_THR_QUANT_SCALE;
215 		reg = IRS_REG_THR_LO;
216 	} else {
217 		return -EINVAL;
218 	}
219 
220 	regval = val / scale;
221 
222 	if (regval >= BIT(8))
223 		return -ERANGE;
224 
225 	ret = regmap_write(data->regmap, reg, regval);
226 	if (ret) {
227 		dev_err(data->dev, "Could not write threshold (%d)\n", ret);
228 		return ret;
229 	}
230 
231 	return 0;
232 }
233 
234 static int irsd200_read_data(struct irsd200_data *data, s16 *val)
235 {
236 	__le16 buf;
237 	int ret;
238 
239 	ret = regmap_bulk_read(data->regmap, IRS_REG_DATA_LO, &buf,
240 			       sizeof(buf));
241 	if (ret) {
242 		dev_err(data->dev, "Could not bulk read data (%d)\n", ret);
243 		return ret;
244 	}
245 
246 	*val = le16_to_cpu(buf);
247 
248 	return 0;
249 }
250 
251 static int irsd200_read_data_rate(struct irsd200_data *data, int *val)
252 {
253 	unsigned int regval;
254 	int ret;
255 
256 	ret = regmap_read(data->regmap, IRS_REG_DATA_RATE, &regval);
257 	if (ret) {
258 		dev_err(data->dev, "Could not read data rate (%d)\n", ret);
259 		return ret;
260 	}
261 
262 	if (regval >= ARRAY_SIZE(irsd200_data_rates))
263 		return -ERANGE;
264 
265 	*val = irsd200_data_rates[regval];
266 
267 	return 0;
268 }
269 
270 static int irsd200_write_data_rate(struct irsd200_data *data, int val)
271 {
272 	size_t idx;
273 	int ret;
274 
275 	for (idx = 0; idx < ARRAY_SIZE(irsd200_data_rates); ++idx) {
276 		if (irsd200_data_rates[idx] == val)
277 			break;
278 	}
279 
280 	if (idx == ARRAY_SIZE(irsd200_data_rates))
281 		return -ERANGE;
282 
283 	ret = regmap_write(data->regmap, IRS_REG_DATA_RATE, idx);
284 	if (ret) {
285 		dev_err(data->dev, "Could not write data rate (%d)\n", ret);
286 		return ret;
287 	}
288 
289 	/*
290 	 * Data sheet says the device needs 3 seconds of settling time. The
291 	 * device operates normally during this period though. This is more of a
292 	 * "guarantee" than trying to prevent other user space reads/writes.
293 	 */
294 	ssleep(3);
295 
296 	return 0;
297 }
298 
299 static int irsd200_read_timer(struct irsd200_data *data, int *val, int *val2)
300 {
301 	__le16 buf;
302 	int ret;
303 
304 	ret = regmap_bulk_read(data->regmap, IRS_REG_TIMER_LO, &buf,
305 			       sizeof(buf));
306 	if (ret) {
307 		dev_err(data->dev, "Could not bulk read timer (%d)\n", ret);
308 		return ret;
309 	}
310 
311 	ret = irsd200_read_data_rate(data, val2);
312 	if (ret)
313 		return ret;
314 
315 	*val = le16_to_cpu(buf);
316 
317 	return 0;
318 }
319 
320 static int irsd200_write_timer(struct irsd200_data *data, int val, int val2)
321 {
322 	unsigned int regval;
323 	int data_rate;
324 	__le16 buf;
325 	int ret;
326 
327 	if (val < 0 || val2 < 0)
328 		return -ERANGE;
329 
330 	ret = irsd200_read_data_rate(data, &data_rate);
331 	if (ret)
332 		return ret;
333 
334 	/* Quantize from seconds. */
335 	regval = val * data_rate + (val2 * data_rate) / 1000000;
336 
337 	/* Value is 10 bits. */
338 	if (regval >= BIT(10))
339 		return -ERANGE;
340 
341 	buf = cpu_to_le16((u16)regval);
342 
343 	ret = regmap_bulk_write(data->regmap, IRS_REG_TIMER_LO, &buf,
344 				sizeof(buf));
345 	if (ret) {
346 		dev_err(data->dev, "Could not bulk write timer (%d)\n", ret);
347 		return ret;
348 	}
349 
350 	return 0;
351 }
352 
353 static int irsd200_read_nr_count(struct irsd200_data *data, int *val)
354 {
355 	unsigned int regval;
356 	int ret;
357 
358 	ret = regmap_read(data->regmap, IRS_REG_NR_COUNT, &regval);
359 	if (ret) {
360 		dev_err(data->dev, "Could not read nr count (%d)\n", ret);
361 		return ret;
362 	}
363 
364 	*val = regval;
365 
366 	return 0;
367 }
368 
369 static int irsd200_write_nr_count(struct irsd200_data *data, int val)
370 {
371 	unsigned int regval;
372 	int ret;
373 
374 	/* A value of zero means that IRS_REG_STATUS is never set. */
375 	if (val <= 0 || val >= 8)
376 		return -ERANGE;
377 
378 	regval = val;
379 
380 	if (regval >= 2) {
381 		/*
382 		 * According to the data sheet, timer must be also set in this
383 		 * case (i.e. be non-zero). Check and enforce that.
384 		 */
385 		ret = irsd200_read_timer(data, &val, &val);
386 		if (ret)
387 			return ret;
388 
389 		if (val == 0) {
390 			dev_err(data->dev,
391 				"Timer must be non-zero when nr count is %u\n",
392 				regval);
393 			return -EPERM;
394 		}
395 	}
396 
397 	ret = regmap_write(data->regmap, IRS_REG_NR_COUNT, regval);
398 	if (ret) {
399 		dev_err(data->dev, "Could not write nr count (%d)\n", ret);
400 		return ret;
401 	}
402 
403 	return 0;
404 }
405 
406 static int irsd200_read_lp_filter(struct irsd200_data *data, int *val)
407 {
408 	unsigned int regval;
409 	int ret;
410 
411 	ret = regmap_field_read(data->regfields[IRS_REGF_LP_FILTER], &regval);
412 	if (ret) {
413 		dev_err(data->dev, "Could not read lp filter frequency (%d)\n",
414 			ret);
415 		return ret;
416 	}
417 
418 	*val = irsd200_lp_filter_freq[regval];
419 
420 	return 0;
421 }
422 
423 static int irsd200_write_lp_filter(struct irsd200_data *data, int val)
424 {
425 	size_t idx;
426 	int ret;
427 
428 	for (idx = 0; idx < ARRAY_SIZE(irsd200_lp_filter_freq); ++idx) {
429 		if (irsd200_lp_filter_freq[idx] == val)
430 			break;
431 	}
432 
433 	if (idx == ARRAY_SIZE(irsd200_lp_filter_freq))
434 		return -ERANGE;
435 
436 	ret = regmap_field_write(data->regfields[IRS_REGF_LP_FILTER], idx);
437 	if (ret) {
438 		dev_err(data->dev, "Could not write lp filter frequency (%d)\n",
439 			ret);
440 		return ret;
441 	}
442 
443 	return 0;
444 }
445 
446 static int irsd200_read_hp_filter(struct irsd200_data *data, int *val,
447 				  int *val2)
448 {
449 	unsigned int regval;
450 	int ret;
451 
452 	ret = regmap_field_read(data->regfields[IRS_REGF_HP_FILTER], &regval);
453 	if (ret) {
454 		dev_err(data->dev, "Could not read hp filter frequency (%d)\n",
455 			ret);
456 		return ret;
457 	}
458 
459 	*val = irsd200_hp_filter_freq[regval][0];
460 	*val2 = irsd200_hp_filter_freq[regval][1];
461 
462 	return 0;
463 }
464 
465 static int irsd200_write_hp_filter(struct irsd200_data *data, int val, int val2)
466 {
467 	size_t idx;
468 	int ret;
469 
470 	/* Truncate fractional part to one digit. */
471 	val2 /= 100000;
472 
473 	for (idx = 0; idx < ARRAY_SIZE(irsd200_hp_filter_freq); ++idx) {
474 		if (irsd200_hp_filter_freq[idx][0] == val2)
475 			break;
476 	}
477 
478 	if (idx == ARRAY_SIZE(irsd200_hp_filter_freq) || val != 0)
479 		return -ERANGE;
480 
481 	ret = regmap_field_write(data->regfields[IRS_REGF_HP_FILTER], idx);
482 	if (ret) {
483 		dev_err(data->dev, "Could not write hp filter frequency (%d)\n",
484 			ret);
485 		return ret;
486 	}
487 
488 	return 0;
489 }
490 
491 static int irsd200_read_raw(struct iio_dev *indio_dev,
492 			    struct iio_chan_spec const *chan, int *val,
493 			    int *val2, long mask)
494 {
495 	struct irsd200_data *data = iio_priv(indio_dev);
496 	int ret;
497 	s16 buf;
498 
499 	switch (mask) {
500 	case IIO_CHAN_INFO_RAW:
501 		ret = irsd200_read_data(data, &buf);
502 		if (ret)
503 			return ret;
504 
505 		*val = buf;
506 		return IIO_VAL_INT;
507 	case IIO_CHAN_INFO_SAMP_FREQ:
508 		ret = irsd200_read_data_rate(data, val);
509 		if (ret)
510 			return ret;
511 
512 		return IIO_VAL_INT;
513 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
514 		ret = irsd200_read_lp_filter(data, val);
515 		if (ret)
516 			return ret;
517 
518 		return IIO_VAL_INT;
519 	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
520 		ret = irsd200_read_hp_filter(data, val, val2);
521 		if (ret)
522 			return ret;
523 
524 		return IIO_VAL_FRACTIONAL;
525 	default:
526 		return -EINVAL;
527 	}
528 }
529 
530 static int irsd200_read_avail(struct iio_dev *indio_dev,
531 			      struct iio_chan_spec const *chan,
532 			      const int **vals, int *type, int *length,
533 			      long mask)
534 {
535 	switch (mask) {
536 	case IIO_CHAN_INFO_SAMP_FREQ:
537 		*vals = irsd200_data_rates;
538 		*type = IIO_VAL_INT;
539 		*length = ARRAY_SIZE(irsd200_data_rates);
540 		return IIO_AVAIL_LIST;
541 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
542 		*vals = irsd200_lp_filter_freq;
543 		*type = IIO_VAL_INT;
544 		*length = ARRAY_SIZE(irsd200_lp_filter_freq);
545 		return IIO_AVAIL_LIST;
546 	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
547 		*vals = (int *)irsd200_hp_filter_freq;
548 		*type = IIO_VAL_FRACTIONAL;
549 		*length = 2 * ARRAY_SIZE(irsd200_hp_filter_freq);
550 		return IIO_AVAIL_LIST;
551 	default:
552 		return -EINVAL;
553 	}
554 }
555 
556 static int irsd200_write_raw(struct iio_dev *indio_dev,
557 			     struct iio_chan_spec const *chan, int val,
558 			     int val2, long mask)
559 {
560 	struct irsd200_data *data = iio_priv(indio_dev);
561 
562 	switch (mask) {
563 	case IIO_CHAN_INFO_SAMP_FREQ:
564 		return irsd200_write_data_rate(data, val);
565 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
566 		return irsd200_write_lp_filter(data, val);
567 	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
568 		return irsd200_write_hp_filter(data, val, val2);
569 	default:
570 		return -EINVAL;
571 	}
572 }
573 
574 static int irsd200_read_event(struct iio_dev *indio_dev,
575 			      const struct iio_chan_spec *chan,
576 			      enum iio_event_type type,
577 			      enum iio_event_direction dir,
578 			      enum iio_event_info info, int *val, int *val2)
579 {
580 	struct irsd200_data *data = iio_priv(indio_dev);
581 	int ret;
582 
583 	switch (info) {
584 	case IIO_EV_INFO_VALUE:
585 		ret = irsd200_read_threshold(data, dir, val);
586 		if (ret)
587 			return ret;
588 
589 		return IIO_VAL_INT;
590 	case IIO_EV_INFO_RUNNING_PERIOD:
591 		ret = irsd200_read_timer(data, val, val2);
592 		if (ret)
593 			return ret;
594 
595 		return IIO_VAL_FRACTIONAL;
596 	case IIO_EV_INFO_RUNNING_COUNT:
597 		ret = irsd200_read_nr_count(data, val);
598 		if (ret)
599 			return ret;
600 
601 		return IIO_VAL_INT;
602 	default:
603 		return -EINVAL;
604 	}
605 }
606 
607 static int irsd200_write_event(struct iio_dev *indio_dev,
608 			       const struct iio_chan_spec *chan,
609 			       enum iio_event_type type,
610 			       enum iio_event_direction dir,
611 			       enum iio_event_info info, int val, int val2)
612 {
613 	struct irsd200_data *data = iio_priv(indio_dev);
614 
615 	switch (info) {
616 	case IIO_EV_INFO_VALUE:
617 		return irsd200_write_threshold(data, dir, val);
618 	case IIO_EV_INFO_RUNNING_PERIOD:
619 		return irsd200_write_timer(data, val, val2);
620 	case IIO_EV_INFO_RUNNING_COUNT:
621 		return irsd200_write_nr_count(data, val);
622 	default:
623 		return -EINVAL;
624 	}
625 }
626 
627 static int irsd200_read_event_config(struct iio_dev *indio_dev,
628 				     const struct iio_chan_spec *chan,
629 				     enum iio_event_type type,
630 				     enum iio_event_direction dir)
631 {
632 	struct irsd200_data *data = iio_priv(indio_dev);
633 	unsigned int val;
634 	int ret;
635 
636 	switch (type) {
637 	case IIO_EV_TYPE_THRESH:
638 		ret = regmap_field_read(
639 			data->regfields[IRS_REGF_INTR_COUNT_THR_OR], &val);
640 		if (ret)
641 			return ret;
642 
643 		return val;
644 	default:
645 		return -EINVAL;
646 	}
647 }
648 
649 static int irsd200_write_event_config(struct iio_dev *indio_dev,
650 				      const struct iio_chan_spec *chan,
651 				      enum iio_event_type type,
652 				      enum iio_event_direction dir, int state)
653 {
654 	struct irsd200_data *data = iio_priv(indio_dev);
655 	unsigned int tmp;
656 	int ret;
657 
658 	switch (type) {
659 	case IIO_EV_TYPE_THRESH:
660 		/* Clear the count register (by reading from it). */
661 		ret = regmap_read(data->regmap, IRS_REG_COUNT, &tmp);
662 		if (ret)
663 			return ret;
664 
665 		return regmap_field_write(
666 			data->regfields[IRS_REGF_INTR_COUNT_THR_OR], !!state);
667 	default:
668 		return -EINVAL;
669 	}
670 }
671 
672 static irqreturn_t irsd200_irq_thread(int irq, void *dev_id)
673 {
674 	struct iio_dev *indio_dev = dev_id;
675 	struct irsd200_data *data = iio_priv(indio_dev);
676 	enum iio_event_direction dir;
677 	unsigned int lower_count;
678 	unsigned int upper_count;
679 	unsigned int status = 0;
680 	unsigned int source = 0;
681 	unsigned int clear = 0;
682 	unsigned int count = 0;
683 	int ret;
684 
685 	ret = regmap_read(data->regmap, IRS_REG_INTR, &source);
686 	if (ret) {
687 		dev_err(data->dev, "Could not read interrupt source (%d)\n",
688 			ret);
689 		return IRQ_HANDLED;
690 	}
691 
692 	ret = regmap_read(data->regmap, IRS_REG_STATUS, &status);
693 	if (ret) {
694 		dev_err(data->dev, "Could not acknowledge interrupt (%d)\n",
695 			ret);
696 		return IRQ_HANDLED;
697 	}
698 
699 	if (status & BIT(IRS_INTR_DATA) && iio_buffer_enabled(indio_dev)) {
700 		iio_trigger_poll_nested(indio_dev->trig);
701 		clear |= BIT(IRS_INTR_DATA);
702 	}
703 
704 	if (status & BIT(IRS_INTR_COUNT_THR_OR) &&
705 	    source & BIT(IRS_INTR_COUNT_THR_OR)) {
706 		/*
707 		 * The register value resets to zero after reading. We therefore
708 		 * need to read once and manually extract the lower and upper
709 		 * count register fields.
710 		 */
711 		ret = regmap_read(data->regmap, IRS_REG_COUNT, &count);
712 		if (ret)
713 			dev_err(data->dev, "Could not read count (%d)\n", ret);
714 
715 		upper_count = IRS_UPPER_COUNT(count);
716 		lower_count = IRS_LOWER_COUNT(count);
717 
718 		/*
719 		 * We only check the OR mode to be able to push events for
720 		 * rising and falling thresholds. AND mode is covered when both
721 		 * upper and lower count is non-zero, and is signaled with
722 		 * IIO_EV_DIR_EITHER.
723 		 */
724 		if (upper_count && !lower_count)
725 			dir = IIO_EV_DIR_RISING;
726 		else if (!upper_count && lower_count)
727 			dir = IIO_EV_DIR_FALLING;
728 		else
729 			dir = IIO_EV_DIR_EITHER;
730 
731 		iio_push_event(indio_dev,
732 			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
733 						    IIO_EV_TYPE_THRESH, dir),
734 			       iio_get_time_ns(indio_dev));
735 
736 		/*
737 		 * The OR mode will always trigger when the AND mode does, but
738 		 * not vice versa. However, it seems like the AND bit needs to
739 		 * be cleared if data capture _and_ threshold count interrupts
740 		 * are desirable, even though it hasn't explicitly been selected
741 		 * (with IRS_REG_INTR). Either way, it doesn't hurt...
742 		 */
743 		clear |= BIT(IRS_INTR_COUNT_THR_OR) |
744 			 BIT(IRS_INTR_COUNT_THR_AND);
745 	}
746 
747 	if (!clear)
748 		return IRQ_NONE;
749 
750 	ret = regmap_write(data->regmap, IRS_REG_STATUS, clear);
751 	if (ret)
752 		dev_err(data->dev,
753 			"Could not clear interrupt status (%d)\n", ret);
754 
755 	return IRQ_HANDLED;
756 }
757 
758 static irqreturn_t irsd200_trigger_handler(int irq, void *pollf)
759 {
760 	struct iio_dev *indio_dev = ((struct iio_poll_func *)pollf)->indio_dev;
761 	struct irsd200_data *data = iio_priv(indio_dev);
762 	s16 buf = 0;
763 	int ret;
764 
765 	ret = irsd200_read_data(data, &buf);
766 	if (ret)
767 		goto end;
768 
769 	iio_push_to_buffers_with_timestamp(indio_dev, &buf,
770 					   iio_get_time_ns(indio_dev));
771 
772 end:
773 	iio_trigger_notify_done(indio_dev->trig);
774 
775 	return IRQ_HANDLED;
776 }
777 
778 static int irsd200_set_trigger_state(struct iio_trigger *trig, bool state)
779 {
780 	struct irsd200_data *data = iio_trigger_get_drvdata(trig);
781 	int ret;
782 
783 	ret = regmap_field_write(data->regfields[IRS_REGF_INTR_DATA], state);
784 	if (ret) {
785 		dev_err(data->dev, "Could not %s data interrupt source (%d)\n",
786 			state ? "enable" : "disable", ret);
787 	}
788 
789 	return ret;
790 }
791 
792 static const struct iio_info irsd200_info = {
793 	.read_raw = irsd200_read_raw,
794 	.read_avail = irsd200_read_avail,
795 	.write_raw = irsd200_write_raw,
796 	.read_event_value = irsd200_read_event,
797 	.write_event_value = irsd200_write_event,
798 	.read_event_config = irsd200_read_event_config,
799 	.write_event_config = irsd200_write_event_config,
800 };
801 
802 static const struct iio_trigger_ops irsd200_trigger_ops = {
803 	.set_trigger_state = irsd200_set_trigger_state,
804 	.validate_device = iio_trigger_validate_own_device,
805 };
806 
807 static const struct iio_event_spec irsd200_event_spec[] = {
808 	{
809 		.type = IIO_EV_TYPE_THRESH,
810 		.dir = IIO_EV_DIR_RISING,
811 		.mask_separate = BIT(IIO_EV_INFO_VALUE),
812 	},
813 	{
814 		.type = IIO_EV_TYPE_THRESH,
815 		.dir = IIO_EV_DIR_FALLING,
816 		.mask_separate = BIT(IIO_EV_INFO_VALUE),
817 	},
818 	{
819 		.type = IIO_EV_TYPE_THRESH,
820 		.dir = IIO_EV_DIR_EITHER,
821 		.mask_separate =
822 			BIT(IIO_EV_INFO_RUNNING_PERIOD) |
823 			BIT(IIO_EV_INFO_RUNNING_COUNT) |
824 			BIT(IIO_EV_INFO_ENABLE),
825 	},
826 };
827 
828 static const struct iio_chan_spec irsd200_channels[] = {
829 	{
830 		.type = IIO_PROXIMITY,
831 		.info_mask_separate =
832 			BIT(IIO_CHAN_INFO_RAW) |
833 			BIT(IIO_CHAN_INFO_SAMP_FREQ) |
834 			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
835 			BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY),
836 		.info_mask_separate_available =
837 			BIT(IIO_CHAN_INFO_SAMP_FREQ) |
838 			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
839 			BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY),
840 		.event_spec = irsd200_event_spec,
841 		.num_event_specs = ARRAY_SIZE(irsd200_event_spec),
842 		.scan_type = {
843 			.sign = 's',
844 			.realbits = 16,
845 			.storagebits = 16,
846 			.endianness = IIO_CPU,
847 		},
848 	},
849 };
850 
851 static int irsd200_probe(struct i2c_client *client)
852 {
853 	struct iio_trigger *trigger;
854 	struct irsd200_data *data;
855 	struct iio_dev *indio_dev;
856 	size_t i;
857 	int ret;
858 
859 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
860 	if (!indio_dev)
861 		return dev_err_probe(&client->dev, -ENOMEM,
862 				     "Could not allocate iio device\n");
863 
864 	data = iio_priv(indio_dev);
865 	data->dev = &client->dev;
866 
867 	data->regmap = devm_regmap_init_i2c(client, &irsd200_regmap_config);
868 	if (IS_ERR(data->regmap))
869 		return dev_err_probe(data->dev, PTR_ERR(data->regmap),
870 				     "Could not initialize regmap\n");
871 
872 	for (i = 0; i < IRS_REGF_MAX; ++i) {
873 		data->regfields[i] = devm_regmap_field_alloc(
874 			data->dev, data->regmap, irsd200_regfields[i]);
875 		if (IS_ERR(data->regfields[i]))
876 			return dev_err_probe(
877 				data->dev, PTR_ERR(data->regfields[i]),
878 				"Could not allocate register field %zu\n", i);
879 	}
880 
881 	ret = devm_regulator_get_enable(data->dev, "vdd");
882 	if (ret)
883 		return dev_err_probe(
884 			data->dev, ret,
885 			"Could not get and enable regulator (%d)\n", ret);
886 
887 	ret = irsd200_setup(data);
888 	if (ret)
889 		return ret;
890 
891 	indio_dev->info = &irsd200_info;
892 	indio_dev->name = IRS_DRV_NAME;
893 	indio_dev->channels = irsd200_channels;
894 	indio_dev->num_channels = ARRAY_SIZE(irsd200_channels);
895 	indio_dev->modes = INDIO_DIRECT_MODE;
896 
897 	if (!client->irq)
898 		return dev_err_probe(data->dev, -ENXIO, "No irq available\n");
899 
900 	ret = devm_iio_triggered_buffer_setup(data->dev, indio_dev, NULL,
901 					      irsd200_trigger_handler, NULL);
902 	if (ret)
903 		return dev_err_probe(
904 			data->dev, ret,
905 			"Could not setup iio triggered buffer (%d)\n", ret);
906 
907 	ret = devm_request_threaded_irq(data->dev, client->irq, NULL,
908 					irsd200_irq_thread,
909 					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
910 					NULL, indio_dev);
911 	if (ret)
912 		return dev_err_probe(data->dev, ret,
913 				     "Could not request irq (%d)\n", ret);
914 
915 	trigger = devm_iio_trigger_alloc(data->dev, "%s-dev%d", indio_dev->name,
916 					 iio_device_id(indio_dev));
917 	if (!trigger)
918 		return dev_err_probe(data->dev, -ENOMEM,
919 				     "Could not allocate iio trigger\n");
920 
921 	trigger->ops = &irsd200_trigger_ops;
922 	iio_trigger_set_drvdata(trigger, data);
923 
924 	ret = devm_iio_trigger_register(data->dev, trigger);
925 	if (ret)
926 		return dev_err_probe(data->dev, ret,
927 				     "Could not register iio trigger (%d)\n",
928 				     ret);
929 
930 	ret = devm_iio_device_register(data->dev, indio_dev);
931 	if (ret)
932 		return dev_err_probe(data->dev, ret,
933 				     "Could not register iio device (%d)\n",
934 				     ret);
935 
936 	return 0;
937 }
938 
939 static const struct of_device_id irsd200_of_match[] = {
940 	{
941 		.compatible = "murata,irsd200",
942 	},
943 	{}
944 };
945 MODULE_DEVICE_TABLE(of, irsd200_of_match);
946 
947 static struct i2c_driver irsd200_driver = {
948 	.driver = {
949 		.name = IRS_DRV_NAME,
950 		.of_match_table = irsd200_of_match,
951 	},
952 	.probe = irsd200_probe,
953 };
954 module_i2c_driver(irsd200_driver);
955 
956 MODULE_AUTHOR("Waqar Hameed <waqar.hameed@axis.com>");
957 MODULE_DESCRIPTION("Murata IRS-D200 PIR sensor driver");
958 MODULE_LICENSE("GPL");
959