1 /* 2 * mpl3115.c - Support for Freescale MPL3115A2 pressure/temperature sensor 3 * 4 * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net> 5 * 6 * This file is subject to the terms and conditions of version 2 of 7 * the GNU General Public License. See the file COPYING in the main 8 * directory of this archive for more details. 9 * 10 * (7-bit I2C slave address 0x60) 11 * 12 * TODO: FIFO buffer, altimeter mode, oversampling, continuous mode, 13 * interrupts, user offset correction, raw mode 14 */ 15 16 #include <linux/module.h> 17 #include <linux/i2c.h> 18 #include <linux/iio/iio.h> 19 #include <linux/iio/sysfs.h> 20 #include <linux/iio/trigger_consumer.h> 21 #include <linux/iio/buffer.h> 22 #include <linux/iio/triggered_buffer.h> 23 #include <linux/delay.h> 24 25 #define MPL3115_STATUS 0x00 26 #define MPL3115_OUT_PRESS 0x01 /* MSB first, 20 bit */ 27 #define MPL3115_OUT_TEMP 0x04 /* MSB first, 12 bit */ 28 #define MPL3115_WHO_AM_I 0x0c 29 #define MPL3115_CTRL_REG1 0x26 30 31 #define MPL3115_DEVICE_ID 0xc4 32 33 #define MPL3115_STATUS_PRESS_RDY BIT(2) 34 #define MPL3115_STATUS_TEMP_RDY BIT(1) 35 36 #define MPL3115_CTRL_RESET BIT(2) /* software reset */ 37 #define MPL3115_CTRL_OST BIT(1) /* initiate measurement */ 38 #define MPL3115_CTRL_ACTIVE BIT(0) /* continuous measurement */ 39 #define MPL3115_CTRL_OS_258MS (BIT(5) | BIT(4)) /* 64x oversampling */ 40 41 struct mpl3115_data { 42 struct i2c_client *client; 43 struct mutex lock; 44 u8 ctrl_reg1; 45 }; 46 47 static int mpl3115_request(struct mpl3115_data *data) 48 { 49 int ret, tries = 15; 50 51 /* trigger measurement */ 52 ret = i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, 53 data->ctrl_reg1 | MPL3115_CTRL_OST); 54 if (ret < 0) 55 return ret; 56 57 while (tries-- > 0) { 58 ret = i2c_smbus_read_byte_data(data->client, MPL3115_CTRL_REG1); 59 if (ret < 0) 60 return ret; 61 /* wait for data ready, i.e. OST cleared */ 62 if (!(ret & MPL3115_CTRL_OST)) 63 break; 64 msleep(20); 65 } 66 67 if (tries < 0) { 68 dev_err(&data->client->dev, "data not ready\n"); 69 return -EIO; 70 } 71 72 return 0; 73 } 74 75 static int mpl3115_read_raw(struct iio_dev *indio_dev, 76 struct iio_chan_spec const *chan, 77 int *val, int *val2, long mask) 78 { 79 struct mpl3115_data *data = iio_priv(indio_dev); 80 __be32 tmp = 0; 81 int ret; 82 83 switch (mask) { 84 case IIO_CHAN_INFO_RAW: 85 if (iio_buffer_enabled(indio_dev)) 86 return -EBUSY; 87 88 switch (chan->type) { 89 case IIO_PRESSURE: /* in 0.25 pascal / LSB */ 90 mutex_lock(&data->lock); 91 ret = mpl3115_request(data); 92 if (ret < 0) { 93 mutex_unlock(&data->lock); 94 return ret; 95 } 96 ret = i2c_smbus_read_i2c_block_data(data->client, 97 MPL3115_OUT_PRESS, 3, (u8 *) &tmp); 98 mutex_unlock(&data->lock); 99 if (ret < 0) 100 return ret; 101 *val = be32_to_cpu(tmp) >> 12; 102 return IIO_VAL_INT; 103 case IIO_TEMP: /* in 0.0625 celsius / LSB */ 104 mutex_lock(&data->lock); 105 ret = mpl3115_request(data); 106 if (ret < 0) { 107 mutex_unlock(&data->lock); 108 return ret; 109 } 110 ret = i2c_smbus_read_i2c_block_data(data->client, 111 MPL3115_OUT_TEMP, 2, (u8 *) &tmp); 112 mutex_unlock(&data->lock); 113 if (ret < 0) 114 return ret; 115 *val = sign_extend32(be32_to_cpu(tmp) >> 20, 11); 116 return IIO_VAL_INT; 117 default: 118 return -EINVAL; 119 } 120 case IIO_CHAN_INFO_SCALE: 121 switch (chan->type) { 122 case IIO_PRESSURE: 123 *val = 0; 124 *val2 = 250; /* want kilopascal */ 125 return IIO_VAL_INT_PLUS_MICRO; 126 case IIO_TEMP: 127 *val = 0; 128 *val2 = 62500; 129 return IIO_VAL_INT_PLUS_MICRO; 130 default: 131 return -EINVAL; 132 } 133 } 134 return -EINVAL; 135 } 136 137 static irqreturn_t mpl3115_trigger_handler(int irq, void *p) 138 { 139 struct iio_poll_func *pf = p; 140 struct iio_dev *indio_dev = pf->indio_dev; 141 struct mpl3115_data *data = iio_priv(indio_dev); 142 u8 buffer[16]; /* 32-bit channel + 16-bit channel + padding + ts */ 143 int ret, pos = 0; 144 145 mutex_lock(&data->lock); 146 ret = mpl3115_request(data); 147 if (ret < 0) { 148 mutex_unlock(&data->lock); 149 goto done; 150 } 151 152 memset(buffer, 0, sizeof(buffer)); 153 if (test_bit(0, indio_dev->active_scan_mask)) { 154 ret = i2c_smbus_read_i2c_block_data(data->client, 155 MPL3115_OUT_PRESS, 3, &buffer[pos]); 156 if (ret < 0) { 157 mutex_unlock(&data->lock); 158 goto done; 159 } 160 pos += 4; 161 } 162 163 if (test_bit(1, indio_dev->active_scan_mask)) { 164 ret = i2c_smbus_read_i2c_block_data(data->client, 165 MPL3115_OUT_TEMP, 2, &buffer[pos]); 166 if (ret < 0) { 167 mutex_unlock(&data->lock); 168 goto done; 169 } 170 } 171 mutex_unlock(&data->lock); 172 173 iio_push_to_buffers_with_timestamp(indio_dev, buffer, 174 iio_get_time_ns(indio_dev)); 175 176 done: 177 iio_trigger_notify_done(indio_dev->trig); 178 return IRQ_HANDLED; 179 } 180 181 static const struct iio_chan_spec mpl3115_channels[] = { 182 { 183 .type = IIO_PRESSURE, 184 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 185 BIT(IIO_CHAN_INFO_SCALE), 186 .scan_index = 0, 187 .scan_type = { 188 .sign = 'u', 189 .realbits = 20, 190 .storagebits = 32, 191 .shift = 12, 192 .endianness = IIO_BE, 193 } 194 }, 195 { 196 .type = IIO_TEMP, 197 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 198 BIT(IIO_CHAN_INFO_SCALE), 199 .scan_index = 1, 200 .scan_type = { 201 .sign = 's', 202 .realbits = 12, 203 .storagebits = 16, 204 .shift = 4, 205 .endianness = IIO_BE, 206 } 207 }, 208 IIO_CHAN_SOFT_TIMESTAMP(2), 209 }; 210 211 static const struct iio_info mpl3115_info = { 212 .read_raw = &mpl3115_read_raw, 213 .driver_module = THIS_MODULE, 214 }; 215 216 static int mpl3115_probe(struct i2c_client *client, 217 const struct i2c_device_id *id) 218 { 219 struct mpl3115_data *data; 220 struct iio_dev *indio_dev; 221 int ret; 222 223 ret = i2c_smbus_read_byte_data(client, MPL3115_WHO_AM_I); 224 if (ret < 0) 225 return ret; 226 if (ret != MPL3115_DEVICE_ID) 227 return -ENODEV; 228 229 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); 230 if (!indio_dev) 231 return -ENOMEM; 232 233 data = iio_priv(indio_dev); 234 data->client = client; 235 mutex_init(&data->lock); 236 237 i2c_set_clientdata(client, indio_dev); 238 indio_dev->info = &mpl3115_info; 239 indio_dev->name = id->name; 240 indio_dev->dev.parent = &client->dev; 241 indio_dev->modes = INDIO_DIRECT_MODE; 242 indio_dev->channels = mpl3115_channels; 243 indio_dev->num_channels = ARRAY_SIZE(mpl3115_channels); 244 245 /* software reset, I2C transfer is aborted (fails) */ 246 i2c_smbus_write_byte_data(client, MPL3115_CTRL_REG1, 247 MPL3115_CTRL_RESET); 248 msleep(50); 249 250 data->ctrl_reg1 = MPL3115_CTRL_OS_258MS; 251 ret = i2c_smbus_write_byte_data(client, MPL3115_CTRL_REG1, 252 data->ctrl_reg1); 253 if (ret < 0) 254 return ret; 255 256 ret = iio_triggered_buffer_setup(indio_dev, NULL, 257 mpl3115_trigger_handler, NULL); 258 if (ret < 0) 259 return ret; 260 261 ret = iio_device_register(indio_dev); 262 if (ret < 0) 263 goto buffer_cleanup; 264 return 0; 265 266 buffer_cleanup: 267 iio_triggered_buffer_cleanup(indio_dev); 268 return ret; 269 } 270 271 static int mpl3115_standby(struct mpl3115_data *data) 272 { 273 return i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, 274 data->ctrl_reg1 & ~MPL3115_CTRL_ACTIVE); 275 } 276 277 static int mpl3115_remove(struct i2c_client *client) 278 { 279 struct iio_dev *indio_dev = i2c_get_clientdata(client); 280 281 iio_device_unregister(indio_dev); 282 iio_triggered_buffer_cleanup(indio_dev); 283 mpl3115_standby(iio_priv(indio_dev)); 284 285 return 0; 286 } 287 288 #ifdef CONFIG_PM_SLEEP 289 static int mpl3115_suspend(struct device *dev) 290 { 291 return mpl3115_standby(iio_priv(i2c_get_clientdata( 292 to_i2c_client(dev)))); 293 } 294 295 static int mpl3115_resume(struct device *dev) 296 { 297 struct mpl3115_data *data = iio_priv(i2c_get_clientdata( 298 to_i2c_client(dev))); 299 300 return i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, 301 data->ctrl_reg1); 302 } 303 304 static SIMPLE_DEV_PM_OPS(mpl3115_pm_ops, mpl3115_suspend, mpl3115_resume); 305 #define MPL3115_PM_OPS (&mpl3115_pm_ops) 306 #else 307 #define MPL3115_PM_OPS NULL 308 #endif 309 310 static const struct i2c_device_id mpl3115_id[] = { 311 { "mpl3115", 0 }, 312 { } 313 }; 314 MODULE_DEVICE_TABLE(i2c, mpl3115_id); 315 316 static struct i2c_driver mpl3115_driver = { 317 .driver = { 318 .name = "mpl3115", 319 .pm = MPL3115_PM_OPS, 320 }, 321 .probe = mpl3115_probe, 322 .remove = mpl3115_remove, 323 .id_table = mpl3115_id, 324 }; 325 module_i2c_driver(mpl3115_driver); 326 327 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); 328 MODULE_DESCRIPTION("Freescale MPL3115 pressure/temperature driver"); 329 MODULE_LICENSE("GPL"); 330