1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * hp206c.c - HOPERF HP206C precision barometer and altimeter sensor 4 * 5 * Copyright (c) 2016, Intel Corporation. 6 * 7 * (7-bit I2C slave address 0x76) 8 * 9 * Datasheet: 10 * http://www.hoperf.com/upload/sensor/HP206C_DataSheet_EN_V2.0.pdf 11 */ 12 13 #include <linux/module.h> 14 #include <linux/i2c.h> 15 #include <linux/iio/iio.h> 16 #include <linux/iio/sysfs.h> 17 #include <linux/delay.h> 18 #include <linux/util_macros.h> 19 #include <linux/acpi.h> 20 21 #include <asm/unaligned.h> 22 23 /* I2C commands: */ 24 #define HP206C_CMD_SOFT_RST 0x06 25 26 #define HP206C_CMD_ADC_CVT 0x40 27 28 #define HP206C_CMD_ADC_CVT_OSR_4096 0x00 29 #define HP206C_CMD_ADC_CVT_OSR_2048 0x04 30 #define HP206C_CMD_ADC_CVT_OSR_1024 0x08 31 #define HP206C_CMD_ADC_CVT_OSR_512 0x0c 32 #define HP206C_CMD_ADC_CVT_OSR_256 0x10 33 #define HP206C_CMD_ADC_CVT_OSR_128 0x14 34 35 #define HP206C_CMD_ADC_CVT_CHNL_PT 0x00 36 #define HP206C_CMD_ADC_CVT_CHNL_T 0x02 37 38 #define HP206C_CMD_READ_P 0x30 39 #define HP206C_CMD_READ_T 0x32 40 41 #define HP206C_CMD_READ_REG 0x80 42 #define HP206C_CMD_WRITE_REG 0xc0 43 44 #define HP206C_REG_INT_EN 0x0b 45 #define HP206C_REG_INT_CFG 0x0c 46 47 #define HP206C_REG_INT_SRC 0x0d 48 #define HP206C_FLAG_DEV_RDY 0x40 49 50 #define HP206C_REG_PARA 0x0f 51 #define HP206C_FLAG_CMPS_EN 0x80 52 53 /* Maximum spin for DEV_RDY */ 54 #define HP206C_MAX_DEV_RDY_WAIT_COUNT 20 55 #define HP206C_DEV_RDY_WAIT_US 20000 56 57 struct hp206c_data { 58 struct mutex mutex; 59 struct i2c_client *client; 60 int temp_osr_index; 61 int pres_osr_index; 62 }; 63 64 struct hp206c_osr_setting { 65 u8 osr_mask; 66 unsigned int temp_conv_time_us; 67 unsigned int pres_conv_time_us; 68 }; 69 70 /* Data from Table 5 in datasheet. */ 71 static const struct hp206c_osr_setting hp206c_osr_settings[] = { 72 { HP206C_CMD_ADC_CVT_OSR_4096, 65600, 131100 }, 73 { HP206C_CMD_ADC_CVT_OSR_2048, 32800, 65600 }, 74 { HP206C_CMD_ADC_CVT_OSR_1024, 16400, 32800 }, 75 { HP206C_CMD_ADC_CVT_OSR_512, 8200, 16400 }, 76 { HP206C_CMD_ADC_CVT_OSR_256, 4100, 8200 }, 77 { HP206C_CMD_ADC_CVT_OSR_128, 2100, 4100 }, 78 }; 79 static const int hp206c_osr_rates[] = { 4096, 2048, 1024, 512, 256, 128 }; 80 static const char hp206c_osr_rates_str[] = "4096 2048 1024 512 256 128"; 81 82 static inline int hp206c_read_reg(struct i2c_client *client, u8 reg) 83 { 84 return i2c_smbus_read_byte_data(client, HP206C_CMD_READ_REG | reg); 85 } 86 87 static inline int hp206c_write_reg(struct i2c_client *client, u8 reg, u8 val) 88 { 89 return i2c_smbus_write_byte_data(client, 90 HP206C_CMD_WRITE_REG | reg, val); 91 } 92 93 static int hp206c_read_20bit(struct i2c_client *client, u8 cmd) 94 { 95 int ret; 96 u8 values[3]; 97 98 ret = i2c_smbus_read_i2c_block_data(client, cmd, sizeof(values), values); 99 if (ret < 0) 100 return ret; 101 if (ret != sizeof(values)) 102 return -EIO; 103 return get_unaligned_be24(&values[0]) & GENMASK(19, 0); 104 } 105 106 /* Spin for max 160ms until DEV_RDY is 1, or return error. */ 107 static int hp206c_wait_dev_rdy(struct iio_dev *indio_dev) 108 { 109 int ret; 110 int count = 0; 111 struct hp206c_data *data = iio_priv(indio_dev); 112 struct i2c_client *client = data->client; 113 114 while (++count <= HP206C_MAX_DEV_RDY_WAIT_COUNT) { 115 ret = hp206c_read_reg(client, HP206C_REG_INT_SRC); 116 if (ret < 0) { 117 dev_err(&indio_dev->dev, "Failed READ_REG INT_SRC: %d\n", ret); 118 return ret; 119 } 120 if (ret & HP206C_FLAG_DEV_RDY) 121 return 0; 122 usleep_range(HP206C_DEV_RDY_WAIT_US, HP206C_DEV_RDY_WAIT_US * 3 / 2); 123 } 124 return -ETIMEDOUT; 125 } 126 127 static int hp206c_set_compensation(struct i2c_client *client, bool enabled) 128 { 129 int val; 130 131 val = hp206c_read_reg(client, HP206C_REG_PARA); 132 if (val < 0) 133 return val; 134 if (enabled) 135 val |= HP206C_FLAG_CMPS_EN; 136 else 137 val &= ~HP206C_FLAG_CMPS_EN; 138 139 return hp206c_write_reg(client, HP206C_REG_PARA, val); 140 } 141 142 /* Do a soft reset */ 143 static int hp206c_soft_reset(struct iio_dev *indio_dev) 144 { 145 int ret; 146 struct hp206c_data *data = iio_priv(indio_dev); 147 struct i2c_client *client = data->client; 148 149 ret = i2c_smbus_write_byte(client, HP206C_CMD_SOFT_RST); 150 if (ret) { 151 dev_err(&client->dev, "Failed to reset device: %d\n", ret); 152 return ret; 153 } 154 155 usleep_range(400, 600); 156 157 ret = hp206c_wait_dev_rdy(indio_dev); 158 if (ret) { 159 dev_err(&client->dev, "Device not ready after soft reset: %d\n", ret); 160 return ret; 161 } 162 163 ret = hp206c_set_compensation(client, true); 164 if (ret) 165 dev_err(&client->dev, "Failed to enable compensation: %d\n", ret); 166 return ret; 167 } 168 169 static int hp206c_conv_and_read(struct iio_dev *indio_dev, 170 u8 conv_cmd, u8 read_cmd, 171 unsigned int sleep_us) 172 { 173 int ret; 174 struct hp206c_data *data = iio_priv(indio_dev); 175 struct i2c_client *client = data->client; 176 177 ret = hp206c_wait_dev_rdy(indio_dev); 178 if (ret < 0) { 179 dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); 180 return ret; 181 } 182 183 ret = i2c_smbus_write_byte(client, conv_cmd); 184 if (ret < 0) { 185 dev_err(&indio_dev->dev, "Failed convert: %d\n", ret); 186 return ret; 187 } 188 189 usleep_range(sleep_us, sleep_us * 3 / 2); 190 191 ret = hp206c_wait_dev_rdy(indio_dev); 192 if (ret < 0) { 193 dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); 194 return ret; 195 } 196 197 ret = hp206c_read_20bit(client, read_cmd); 198 if (ret < 0) 199 dev_err(&indio_dev->dev, "Failed read: %d\n", ret); 200 201 return ret; 202 } 203 204 static int hp206c_read_raw(struct iio_dev *indio_dev, 205 struct iio_chan_spec const *chan, int *val, 206 int *val2, long mask) 207 { 208 int ret; 209 struct hp206c_data *data = iio_priv(indio_dev); 210 const struct hp206c_osr_setting *osr_setting; 211 u8 conv_cmd; 212 213 mutex_lock(&data->mutex); 214 215 switch (mask) { 216 case IIO_CHAN_INFO_OVERSAMPLING_RATIO: 217 switch (chan->type) { 218 case IIO_TEMP: 219 *val = hp206c_osr_rates[data->temp_osr_index]; 220 ret = IIO_VAL_INT; 221 break; 222 223 case IIO_PRESSURE: 224 *val = hp206c_osr_rates[data->pres_osr_index]; 225 ret = IIO_VAL_INT; 226 break; 227 default: 228 ret = -EINVAL; 229 } 230 break; 231 232 case IIO_CHAN_INFO_RAW: 233 switch (chan->type) { 234 case IIO_TEMP: 235 osr_setting = &hp206c_osr_settings[data->temp_osr_index]; 236 conv_cmd = HP206C_CMD_ADC_CVT | 237 osr_setting->osr_mask | 238 HP206C_CMD_ADC_CVT_CHNL_T; 239 ret = hp206c_conv_and_read(indio_dev, 240 conv_cmd, 241 HP206C_CMD_READ_T, 242 osr_setting->temp_conv_time_us); 243 if (ret >= 0) { 244 /* 20 significant bits are provided. 245 * Extend sign over the rest. 246 */ 247 *val = sign_extend32(ret, 19); 248 ret = IIO_VAL_INT; 249 } 250 break; 251 252 case IIO_PRESSURE: 253 osr_setting = &hp206c_osr_settings[data->pres_osr_index]; 254 conv_cmd = HP206C_CMD_ADC_CVT | 255 osr_setting->osr_mask | 256 HP206C_CMD_ADC_CVT_CHNL_PT; 257 ret = hp206c_conv_and_read(indio_dev, 258 conv_cmd, 259 HP206C_CMD_READ_P, 260 osr_setting->pres_conv_time_us); 261 if (ret >= 0) { 262 *val = ret; 263 ret = IIO_VAL_INT; 264 } 265 break; 266 default: 267 ret = -EINVAL; 268 } 269 break; 270 271 case IIO_CHAN_INFO_SCALE: 272 switch (chan->type) { 273 case IIO_TEMP: 274 *val = 0; 275 *val2 = 10000; 276 ret = IIO_VAL_INT_PLUS_MICRO; 277 break; 278 279 case IIO_PRESSURE: 280 *val = 0; 281 *val2 = 1000; 282 ret = IIO_VAL_INT_PLUS_MICRO; 283 break; 284 default: 285 ret = -EINVAL; 286 } 287 break; 288 289 default: 290 ret = -EINVAL; 291 } 292 293 mutex_unlock(&data->mutex); 294 return ret; 295 } 296 297 static int hp206c_write_raw(struct iio_dev *indio_dev, 298 struct iio_chan_spec const *chan, 299 int val, int val2, long mask) 300 { 301 int ret = 0; 302 struct hp206c_data *data = iio_priv(indio_dev); 303 304 if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO) 305 return -EINVAL; 306 mutex_lock(&data->mutex); 307 switch (chan->type) { 308 case IIO_TEMP: 309 data->temp_osr_index = find_closest_descending(val, 310 hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates)); 311 break; 312 case IIO_PRESSURE: 313 data->pres_osr_index = find_closest_descending(val, 314 hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates)); 315 break; 316 default: 317 ret = -EINVAL; 318 } 319 mutex_unlock(&data->mutex); 320 return ret; 321 } 322 323 static const struct iio_chan_spec hp206c_channels[] = { 324 { 325 .type = IIO_TEMP, 326 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 327 BIT(IIO_CHAN_INFO_SCALE) | 328 BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 329 }, 330 { 331 .type = IIO_PRESSURE, 332 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 333 BIT(IIO_CHAN_INFO_SCALE) | 334 BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 335 } 336 }; 337 338 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(hp206c_osr_rates_str); 339 340 static struct attribute *hp206c_attributes[] = { 341 &iio_const_attr_sampling_frequency_available.dev_attr.attr, 342 NULL, 343 }; 344 345 static const struct attribute_group hp206c_attribute_group = { 346 .attrs = hp206c_attributes, 347 }; 348 349 static const struct iio_info hp206c_info = { 350 .attrs = &hp206c_attribute_group, 351 .read_raw = hp206c_read_raw, 352 .write_raw = hp206c_write_raw, 353 }; 354 355 static int hp206c_probe(struct i2c_client *client) 356 { 357 const struct i2c_device_id *id = i2c_client_get_device_id(client); 358 struct iio_dev *indio_dev; 359 struct hp206c_data *data; 360 int ret; 361 362 if (!i2c_check_functionality(client->adapter, 363 I2C_FUNC_SMBUS_BYTE | 364 I2C_FUNC_SMBUS_BYTE_DATA | 365 I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { 366 dev_err(&client->dev, "Adapter does not support " 367 "all required i2c functionality\n"); 368 return -ENODEV; 369 } 370 371 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); 372 if (!indio_dev) 373 return -ENOMEM; 374 375 data = iio_priv(indio_dev); 376 data->client = client; 377 mutex_init(&data->mutex); 378 379 indio_dev->info = &hp206c_info; 380 indio_dev->name = id->name; 381 indio_dev->modes = INDIO_DIRECT_MODE; 382 indio_dev->channels = hp206c_channels; 383 indio_dev->num_channels = ARRAY_SIZE(hp206c_channels); 384 385 i2c_set_clientdata(client, indio_dev); 386 387 /* Do a soft reset on probe */ 388 ret = hp206c_soft_reset(indio_dev); 389 if (ret) { 390 dev_err(&client->dev, "Failed to reset on startup: %d\n", ret); 391 return -ENODEV; 392 } 393 394 return devm_iio_device_register(&client->dev, indio_dev); 395 } 396 397 static const struct i2c_device_id hp206c_id[] = { 398 {"hp206c"}, 399 {} 400 }; 401 MODULE_DEVICE_TABLE(i2c, hp206c_id); 402 403 #ifdef CONFIG_ACPI 404 static const struct acpi_device_id hp206c_acpi_match[] = { 405 {"HOP206C", 0}, 406 { }, 407 }; 408 MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match); 409 #endif 410 411 static struct i2c_driver hp206c_driver = { 412 .probe_new = hp206c_probe, 413 .id_table = hp206c_id, 414 .driver = { 415 .name = "hp206c", 416 .acpi_match_table = ACPI_PTR(hp206c_acpi_match), 417 }, 418 }; 419 420 module_i2c_driver(hp206c_driver); 421 422 MODULE_DESCRIPTION("HOPERF HP206C precision barometer and altimeter sensor"); 423 MODULE_AUTHOR("Leonard Crestez <leonard.crestez@intel.com>"); 424 MODULE_LICENSE("GPL v2"); 425