1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (C) 2016 - Marcin Malagowski <mrc@bourne.st> 4 */ 5 #include <linux/delay.h> 6 #include <linux/device.h> 7 #include <linux/err.h> 8 #include <linux/i2c.h> 9 #include <linux/io.h> 10 #include <linux/kernel.h> 11 #include <linux/module.h> 12 #include <linux/iio/iio.h> 13 14 #define ABP060MG_ERROR_MASK 0xC000 15 #define ABP060MG_RESP_TIME_MS 40 16 #define ABP060MG_MIN_COUNTS 1638 /* = 0x0666 (10% of u14) */ 17 #define ABP060MG_MAX_COUNTS 14745 /* = 0x3999 (90% of u14) */ 18 #define ABP060MG_NUM_COUNTS (ABP060MG_MAX_COUNTS - ABP060MG_MIN_COUNTS) 19 20 enum abp_variant { 21 /* gage [kPa] */ 22 ABP006KG, ABP010KG, ABP016KG, ABP025KG, ABP040KG, ABP060KG, ABP100KG, 23 ABP160KG, ABP250KG, ABP400KG, ABP600KG, ABP001GG, 24 /* differential [kPa] */ 25 ABP006KD, ABP010KD, ABP016KD, ABP025KD, ABP040KD, ABP060KD, ABP100KD, 26 ABP160KD, ABP250KD, ABP400KD, 27 /* gage [psi] */ 28 ABP001PG, ABP005PG, ABP015PG, ABP030PG, ABP060PG, ABP100PG, ABP150PG, 29 /* differential [psi] */ 30 ABP001PD, ABP005PD, ABP015PD, ABP030PD, ABP060PD, 31 }; 32 33 struct abp_config { 34 int min; 35 int max; 36 }; 37 38 static struct abp_config abp_config[] = { 39 /* mbar & kPa variants */ 40 [ABP006KG] = { .min = 0, .max = 6000 }, 41 [ABP010KG] = { .min = 0, .max = 10000 }, 42 [ABP016KG] = { .min = 0, .max = 16000 }, 43 [ABP025KG] = { .min = 0, .max = 25000 }, 44 [ABP040KG] = { .min = 0, .max = 40000 }, 45 [ABP060KG] = { .min = 0, .max = 60000 }, 46 [ABP100KG] = { .min = 0, .max = 100000 }, 47 [ABP160KG] = { .min = 0, .max = 160000 }, 48 [ABP250KG] = { .min = 0, .max = 250000 }, 49 [ABP400KG] = { .min = 0, .max = 400000 }, 50 [ABP600KG] = { .min = 0, .max = 600000 }, 51 [ABP001GG] = { .min = 0, .max = 1000000 }, 52 [ABP006KD] = { .min = -6000, .max = 6000 }, 53 [ABP010KD] = { .min = -10000, .max = 10000 }, 54 [ABP016KD] = { .min = -16000, .max = 16000 }, 55 [ABP025KD] = { .min = -25000, .max = 25000 }, 56 [ABP040KD] = { .min = -40000, .max = 40000 }, 57 [ABP060KD] = { .min = -60000, .max = 60000 }, 58 [ABP100KD] = { .min = -100000, .max = 100000 }, 59 [ABP160KD] = { .min = -160000, .max = 160000 }, 60 [ABP250KD] = { .min = -250000, .max = 250000 }, 61 [ABP400KD] = { .min = -400000, .max = 400000 }, 62 /* psi variants (1 psi ~ 6895 Pa) */ 63 [ABP001PG] = { .min = 0, .max = 6985 }, 64 [ABP005PG] = { .min = 0, .max = 34474 }, 65 [ABP015PG] = { .min = 0, .max = 103421 }, 66 [ABP030PG] = { .min = 0, .max = 206843 }, 67 [ABP060PG] = { .min = 0, .max = 413686 }, 68 [ABP100PG] = { .min = 0, .max = 689476 }, 69 [ABP150PG] = { .min = 0, .max = 1034214 }, 70 [ABP001PD] = { .min = -6895, .max = 6895 }, 71 [ABP005PD] = { .min = -34474, .max = 34474 }, 72 [ABP015PD] = { .min = -103421, .max = 103421 }, 73 [ABP030PD] = { .min = -206843, .max = 206843 }, 74 [ABP060PD] = { .min = -413686, .max = 413686 }, 75 }; 76 77 struct abp_state { 78 struct i2c_client *client; 79 struct mutex lock; 80 81 /* 82 * bus-dependent MEASURE_REQUEST length. 83 * If no SMBUS_QUICK support, need to send dummy byte 84 */ 85 int mreq_len; 86 87 /* model-dependent values (calculated on probe) */ 88 int scale; 89 int offset; 90 }; 91 92 static const struct iio_chan_spec abp060mg_channels[] = { 93 { 94 .type = IIO_PRESSURE, 95 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 96 BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), 97 }, 98 }; 99 100 static int abp060mg_get_measurement(struct abp_state *state, int *val) 101 { 102 struct i2c_client *client = state->client; 103 __be16 buf[2]; 104 u16 pressure; 105 int ret; 106 107 buf[0] = 0; 108 ret = i2c_master_send(client, (u8 *)&buf, state->mreq_len); 109 if (ret < 0) 110 return ret; 111 112 msleep_interruptible(ABP060MG_RESP_TIME_MS); 113 114 ret = i2c_master_recv(client, (u8 *)&buf, sizeof(buf)); 115 if (ret < 0) 116 return ret; 117 118 pressure = be16_to_cpu(buf[0]); 119 if (pressure & ABP060MG_ERROR_MASK) 120 return -EIO; 121 122 if (pressure < ABP060MG_MIN_COUNTS || pressure > ABP060MG_MAX_COUNTS) 123 return -EIO; 124 125 *val = pressure; 126 127 return IIO_VAL_INT; 128 } 129 130 static int abp060mg_read_raw(struct iio_dev *indio_dev, 131 struct iio_chan_spec const *chan, int *val, 132 int *val2, long mask) 133 { 134 struct abp_state *state = iio_priv(indio_dev); 135 int ret; 136 137 mutex_lock(&state->lock); 138 139 switch (mask) { 140 case IIO_CHAN_INFO_RAW: 141 ret = abp060mg_get_measurement(state, val); 142 break; 143 case IIO_CHAN_INFO_OFFSET: 144 *val = state->offset; 145 ret = IIO_VAL_INT; 146 break; 147 case IIO_CHAN_INFO_SCALE: 148 *val = state->scale; 149 *val2 = ABP060MG_NUM_COUNTS * 1000; /* to kPa */ 150 ret = IIO_VAL_FRACTIONAL; 151 break; 152 default: 153 ret = -EINVAL; 154 break; 155 } 156 157 mutex_unlock(&state->lock); 158 return ret; 159 } 160 161 static const struct iio_info abp060mg_info = { 162 .read_raw = abp060mg_read_raw, 163 }; 164 165 static void abp060mg_init_device(struct iio_dev *indio_dev, unsigned long id) 166 { 167 struct abp_state *state = iio_priv(indio_dev); 168 struct abp_config *cfg = &abp_config[id]; 169 170 state->scale = cfg->max - cfg->min; 171 state->offset = -ABP060MG_MIN_COUNTS; 172 173 if (cfg->min < 0) /* differential */ 174 state->offset -= ABP060MG_NUM_COUNTS >> 1; 175 } 176 177 static int abp060mg_probe(struct i2c_client *client) 178 { 179 const struct i2c_device_id *id = i2c_client_get_device_id(client); 180 struct iio_dev *indio_dev; 181 struct abp_state *state; 182 unsigned long cfg_id = id->driver_data; 183 184 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state)); 185 if (!indio_dev) 186 return -ENOMEM; 187 188 state = iio_priv(indio_dev); 189 i2c_set_clientdata(client, state); 190 state->client = client; 191 192 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_QUICK)) 193 state->mreq_len = 1; 194 195 abp060mg_init_device(indio_dev, cfg_id); 196 197 indio_dev->name = dev_name(&client->dev); 198 indio_dev->modes = INDIO_DIRECT_MODE; 199 indio_dev->info = &abp060mg_info; 200 201 indio_dev->channels = abp060mg_channels; 202 indio_dev->num_channels = ARRAY_SIZE(abp060mg_channels); 203 204 mutex_init(&state->lock); 205 206 return devm_iio_device_register(&client->dev, indio_dev); 207 } 208 209 static const struct i2c_device_id abp060mg_id_table[] = { 210 /* mbar & kPa variants (abp060m [60 mbar] == abp006k [6 kPa]) */ 211 /* gage: */ 212 { "abp060mg", ABP006KG }, { "abp006kg", ABP006KG }, 213 { "abp100mg", ABP010KG }, { "abp010kg", ABP010KG }, 214 { "abp160mg", ABP016KG }, { "abp016kg", ABP016KG }, 215 { "abp250mg", ABP025KG }, { "abp025kg", ABP025KG }, 216 { "abp400mg", ABP040KG }, { "abp040kg", ABP040KG }, 217 { "abp600mg", ABP060KG }, { "abp060kg", ABP060KG }, 218 { "abp001bg", ABP100KG }, { "abp100kg", ABP100KG }, 219 { "abp1_6bg", ABP160KG }, { "abp160kg", ABP160KG }, 220 { "abp2_5bg", ABP250KG }, { "abp250kg", ABP250KG }, 221 { "abp004bg", ABP400KG }, { "abp400kg", ABP400KG }, 222 { "abp006bg", ABP600KG }, { "abp600kg", ABP600KG }, 223 { "abp010bg", ABP001GG }, { "abp001gg", ABP001GG }, 224 /* differential: */ 225 { "abp060md", ABP006KD }, { "abp006kd", ABP006KD }, 226 { "abp100md", ABP010KD }, { "abp010kd", ABP010KD }, 227 { "abp160md", ABP016KD }, { "abp016kd", ABP016KD }, 228 { "abp250md", ABP025KD }, { "abp025kd", ABP025KD }, 229 { "abp400md", ABP040KD }, { "abp040kd", ABP040KD }, 230 { "abp600md", ABP060KD }, { "abp060kd", ABP060KD }, 231 { "abp001bd", ABP100KD }, { "abp100kd", ABP100KD }, 232 { "abp1_6bd", ABP160KD }, { "abp160kd", ABP160KD }, 233 { "abp2_5bd", ABP250KD }, { "abp250kd", ABP250KD }, 234 { "abp004bd", ABP400KD }, { "abp400kd", ABP400KD }, 235 /* psi variants */ 236 /* gage: */ 237 { "abp001pg", ABP001PG }, 238 { "abp005pg", ABP005PG }, 239 { "abp015pg", ABP015PG }, 240 { "abp030pg", ABP030PG }, 241 { "abp060pg", ABP060PG }, 242 { "abp100pg", ABP100PG }, 243 { "abp150pg", ABP150PG }, 244 /* differential: */ 245 { "abp001pd", ABP001PD }, 246 { "abp005pd", ABP005PD }, 247 { "abp015pd", ABP015PD }, 248 { "abp030pd", ABP030PD }, 249 { "abp060pd", ABP060PD }, 250 { /* empty */ }, 251 }; 252 MODULE_DEVICE_TABLE(i2c, abp060mg_id_table); 253 254 static struct i2c_driver abp060mg_driver = { 255 .driver = { 256 .name = "abp060mg", 257 }, 258 .probe = abp060mg_probe, 259 .id_table = abp060mg_id_table, 260 }; 261 module_i2c_driver(abp060mg_driver); 262 263 MODULE_AUTHOR("Marcin Malagowski <mrc@bourne.st>"); 264 MODULE_DESCRIPTION("Honeywell ABP pressure sensor driver"); 265 MODULE_LICENSE("GPL"); 266