1# 2# Pressure drivers 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Pressure sensors" 7 8config ABP060MG 9 tristate "Honeywell ABP pressure sensor driver" 10 depends on I2C 11 help 12 Say yes here to build support for the Honeywell ABP pressure 13 sensors. 14 15 To compile this driver as a module, choose M here: the module 16 will be called abp060mg. 17 18config BMP280 19 tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" 20 depends on (I2C || SPI_MASTER) 21 select REGMAP 22 select BMP280_I2C if (I2C) 23 select BMP280_SPI if (SPI_MASTER) 24 help 25 Say yes here to build support for Bosch Sensortec BMP180 and BMP280 26 pressure and temperature sensors. Also supports the BME280 with 27 an additional humidity sensor channel. 28 29 To compile this driver as a module, choose M here: the core module 30 will be called bmp280 and you will also get bmp280-i2c for I2C 31 and/or bmp280-spi for SPI support. 32 33config BMP280_I2C 34 tristate 35 depends on BMP280 36 depends on I2C 37 select REGMAP_I2C 38 39config BMP280_SPI 40 tristate 41 depends on BMP280 42 depends on SPI_MASTER 43 select REGMAP 44 45config IIO_CROS_EC_BARO 46 tristate "ChromeOS EC Barometer Sensor" 47 depends on IIO_CROS_EC_SENSORS_CORE 48 help 49 Say yes here to build support for the Barometer sensor when 50 presented by the ChromeOS EC Sensor hub. 51 52 To compile this driver as a module, choose M here: the module 53 will be called cros_ec_baro. 54 55config HID_SENSOR_PRESS 56 depends on HID_SENSOR_HUB 57 select IIO_BUFFER 58 select IIO_TRIGGERED_BUFFER 59 select HID_SENSOR_IIO_COMMON 60 select HID_SENSOR_IIO_TRIGGER 61 tristate "HID PRESS" 62 help 63 Say yes here to build support for the HID SENSOR 64 Pressure driver 65 66 To compile this driver as a module, choose M here: the module 67 will be called hid-sensor-press. 68 69config HP03 70 tristate "Hope RF HP03 temperature and pressure sensor driver" 71 depends on I2C 72 select REGMAP_I2C 73 help 74 Say yes here to build support for Hope RF HP03 pressure and 75 temperature sensor. 76 77 To compile this driver as a module, choose M here: the module 78 will be called hp03. 79 80config MPL115 81 tristate 82 83config MPL115_I2C 84 tristate "Freescale MPL115A2 pressure sensor driver" 85 depends on I2C 86 select MPL115 87 help 88 Say yes here to build support for the Freescale MPL115A2 89 pressure sensor connected via I2C. 90 91 To compile this driver as a module, choose M here: the module 92 will be called mpl115_i2c. 93 94config MPL115_SPI 95 tristate "Freescale MPL115A1 pressure sensor driver" 96 depends on SPI_MASTER 97 select MPL115 98 help 99 Say yes here to build support for the Freescale MPL115A1 100 pressure sensor connected via SPI. 101 102 To compile this driver as a module, choose M here: the module 103 will be called mpl115_spi. 104 105config MPL3115 106 tristate "Freescale MPL3115A2 pressure sensor driver" 107 depends on I2C 108 select IIO_BUFFER 109 select IIO_TRIGGERED_BUFFER 110 help 111 Say yes here to build support for the Freescale MPL3115A2 112 pressure sensor / altimeter. 113 114 To compile this driver as a module, choose M here: the module 115 will be called mpl3115. 116 117config MS5611 118 tristate "Measurement Specialties MS5611 pressure sensor driver" 119 select IIO_BUFFER 120 select IIO_TRIGGERED_BUFFER 121 help 122 Say Y here to build support for the Measurement Specialties 123 MS5611, MS5607 pressure and temperature sensors. 124 125 To compile this driver as a module, choose M here: the module will 126 be called ms5611_core. 127 128config MS5611_I2C 129 tristate "support I2C bus connection" 130 depends on I2C && MS5611 131 help 132 Say Y here to build I2C bus support for MS5611. 133 134 To compile this driver as a module, choose M here: the module will 135 be called ms5611_i2c. 136 137config MS5611_SPI 138 tristate "support SPI bus connection" 139 depends on SPI_MASTER && MS5611 140 help 141 Say Y here to build SPI bus support for MS5611. 142 143 To compile this driver as a module, choose M here: the module will 144 be called ms5611_spi. 145 146config MS5637 147 tristate "Measurement Specialties MS5637 pressure & temperature sensor" 148 depends on I2C 149 select IIO_MS_SENSORS_I2C 150 help 151 If you say yes here you get support for the Measurement Specialties 152 MS5637 pressure and temperature sensor. 153 This driver is also used for MS8607 temperature, pressure & humidity 154 sensor 155 156 This driver can also be built as a module. If so, the module will 157 be called ms5637. 158 159config IIO_ST_PRESS 160 tristate "STMicroelectronics pressure sensor Driver" 161 depends on (I2C || SPI_MASTER) && SYSFS 162 select IIO_ST_SENSORS_CORE 163 select IIO_ST_PRESS_I2C if (I2C) 164 select IIO_ST_PRESS_SPI if (SPI_MASTER) 165 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 166 help 167 Say yes here to build support for STMicroelectronics pressure 168 sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH. 169 170 This driver can also be built as a module. If so, these modules 171 will be created: 172 - st_pressure (core functions for the driver [it is mandatory]); 173 - st_pressure_i2c (necessary for the I2C devices [optional*]); 174 - st_pressure_spi (necessary for the SPI devices [optional*]); 175 176 (*) one of these is necessary to do something. 177 178config IIO_ST_PRESS_I2C 179 tristate 180 depends on IIO_ST_PRESS 181 depends on IIO_ST_SENSORS_I2C 182 183config IIO_ST_PRESS_SPI 184 tristate 185 depends on IIO_ST_PRESS 186 depends on IIO_ST_SENSORS_SPI 187 188config T5403 189 tristate "EPCOS T5403 digital barometric pressure sensor driver" 190 depends on I2C 191 help 192 Say yes here to build support for the EPCOS T5403 pressure sensor 193 connected via I2C. 194 195 To compile this driver as a module, choose M here: the module 196 will be called t5403. 197 198config HP206C 199 tristate "HOPERF HP206C precision barometer and altimeter sensor" 200 depends on I2C 201 help 202 Say yes here to build support for the HOPREF HP206C precision 203 barometer and altimeter sensor. 204 205 This driver can also be built as a module. If so, the module will 206 be called hp206c. 207 208config ZPA2326 209 tristate "Murata ZPA2326 pressure sensor driver" 210 select IIO_BUFFER 211 select IIO_TRIGGERED_BUFFER 212 select REGMAP 213 select ZPA2326_I2C if I2C 214 select ZPA2326_SPI if SPI_MASTER 215 help 216 Say Y here to build support for the Murata ZPA2326 pressure and 217 temperature sensor. 218 219 To compile this driver as a module, choose M here: the module will 220 be called zpa2326. 221 222config ZPA2326_I2C 223 tristate 224 select REGMAP_I2C 225 226config ZPA2326_SPI 227 tristate 228 select REGMAP_SPI 229 230endmenu 231