1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Pressure drivers 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Pressure sensors" 8 9config ABP060MG 10 tristate "Honeywell ABP pressure sensor driver" 11 depends on I2C 12 help 13 Say yes here to build support for the Honeywell ABP pressure 14 sensors. 15 16 To compile this driver as a module, choose M here: the module 17 will be called abp060mg. 18 19config BMP280 20 tristate "Bosch Sensortec BMP180/BMP280/BMP380 pressure sensor I2C driver" 21 depends on (I2C || SPI_MASTER) 22 select REGMAP 23 select BMP280_I2C if (I2C) 24 select BMP280_SPI if (SPI_MASTER) 25 help 26 Say yes here to build support for Bosch Sensortec BMP180, BMP280 and 27 BMP380 pressure and temperature sensors. Also supports the BME280 with 28 an additional humidity sensor channel. 29 30 To compile this driver as a module, choose M here: the core module 31 will be called bmp280 and you will also get bmp280-i2c for I2C 32 and/or bmp280-spi for SPI support. 33 34config BMP280_I2C 35 tristate 36 depends on BMP280 37 depends on I2C 38 select REGMAP_I2C 39 40config BMP280_SPI 41 tristate 42 depends on BMP280 43 depends on SPI_MASTER 44 select REGMAP 45 46config IIO_CROS_EC_BARO 47 tristate "ChromeOS EC Barometer Sensor" 48 depends on IIO_CROS_EC_SENSORS_CORE 49 help 50 Say yes here to build support for the Barometer sensor when 51 presented by the ChromeOS EC Sensor hub. 52 53 To compile this driver as a module, choose M here: the module 54 will be called cros_ec_baro. 55 56config DLHL60D 57 tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors" 58 depends on I2C 59 select IIO_BUFFER 60 select IIO_TRIGGERED_BUFFER 61 help 62 Say yes here to build support for the All Sensors DLH series 63 pressure sensors driver. 64 65 To compile this driver as a module, choose M here: the module 66 will be called dlhl60d. 67 68config DPS310 69 tristate "Infineon DPS310 pressure and temperature sensor" 70 depends on I2C 71 select REGMAP_I2C 72 help 73 Support for the Infineon DPS310 digital barometric pressure sensor. 74 It can be accessed over I2C bus. 75 76 This driver can also be built as a module. If so, the module will be 77 called dps310. 78 79config HID_SENSOR_PRESS 80 depends on HID_SENSOR_HUB 81 select IIO_BUFFER 82 select HID_SENSOR_IIO_COMMON 83 select HID_SENSOR_IIO_TRIGGER 84 tristate "HID PRESS" 85 help 86 Say yes here to build support for the HID SENSOR 87 Pressure driver 88 89 To compile this driver as a module, choose M here: the module 90 will be called hid-sensor-press. 91 92config HP03 93 tristate "Hope RF HP03 temperature and pressure sensor driver" 94 depends on I2C 95 select REGMAP_I2C 96 help 97 Say yes here to build support for Hope RF HP03 pressure and 98 temperature sensor. 99 100 To compile this driver as a module, choose M here: the module 101 will be called hp03. 102 103config ICP10100 104 tristate "InvenSense ICP-101xx pressure and temperature sensor" 105 depends on I2C 106 select CRC8 107 help 108 Say yes here to build support for InvenSense ICP-101xx barometric 109 pressure and temperature sensor. 110 111 To compile this driver as a module, choose M here: the module 112 will be called icp10100. 113 114config MPL115 115 tristate 116 117config MPL115_I2C 118 tristate "Freescale MPL115A2 pressure sensor driver" 119 depends on I2C 120 select MPL115 121 help 122 Say yes here to build support for the Freescale MPL115A2 123 pressure sensor connected via I2C. 124 125 To compile this driver as a module, choose M here: the module 126 will be called mpl115_i2c. 127 128config MPL115_SPI 129 tristate "Freescale MPL115A1 pressure sensor driver" 130 depends on SPI_MASTER 131 select MPL115 132 help 133 Say yes here to build support for the Freescale MPL115A1 134 pressure sensor connected via SPI. 135 136 To compile this driver as a module, choose M here: the module 137 will be called mpl115_spi. 138 139config MPL3115 140 tristate "Freescale MPL3115A2 pressure sensor driver" 141 depends on I2C 142 select IIO_BUFFER 143 select IIO_TRIGGERED_BUFFER 144 help 145 Say yes here to build support for the Freescale MPL3115A2 146 pressure sensor / altimeter. 147 148 To compile this driver as a module, choose M here: the module 149 will be called mpl3115. 150 151config MS5611 152 tristate "Measurement Specialties MS5611 pressure sensor driver" 153 select IIO_BUFFER 154 select IIO_TRIGGERED_BUFFER 155 help 156 Say Y here to build support for the Measurement Specialties 157 MS5611, MS5607 pressure and temperature sensors. 158 159 To compile this driver as a module, choose M here: the module will 160 be called ms5611_core. 161 162config MS5611_I2C 163 tristate "support I2C bus connection" 164 depends on I2C && MS5611 165 help 166 Say Y here to build I2C bus support for MS5611. 167 168 To compile this driver as a module, choose M here: the module will 169 be called ms5611_i2c. 170 171config MS5611_SPI 172 tristate "support SPI bus connection" 173 depends on SPI_MASTER && MS5611 174 help 175 Say Y here to build SPI bus support for MS5611. 176 177 To compile this driver as a module, choose M here: the module will 178 be called ms5611_spi. 179 180config MS5637 181 tristate "Measurement Specialties MS5637 pressure & temperature sensor" 182 depends on I2C 183 select IIO_MS_SENSORS_I2C 184 help 185 If you say yes here you get support for the Measurement Specialties 186 MS5637 pressure and temperature sensor. 187 This driver is also used for MS8607 temperature, pressure & humidity 188 sensor 189 190 This driver can also be built as a module. If so, the module will 191 be called ms5637. 192 193config IIO_ST_PRESS 194 tristate "STMicroelectronics pressure sensor Driver" 195 depends on (I2C || SPI_MASTER) && SYSFS 196 select IIO_ST_SENSORS_CORE 197 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 198 help 199 Say yes here to build support for STMicroelectronics pressure 200 sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH. 201 202 Also need to enable at least one of I2C and SPI interface drivers 203 below. 204 205config IIO_ST_PRESS_I2C 206 tristate "STMicroelectronics pressure sensor I2C Interface" 207 depends on I2C && IIO_ST_PRESS 208 default I2C && IIO_ST_PRESS 209 select IIO_ST_SENSORS_I2C 210 help 211 Build support for STMicroelectronics pressure sensor I2C interface. 212 213 To compile this driver as a module, choose M here. The module 214 will be called st_pressure_i2c. 215 216config IIO_ST_PRESS_SPI 217 tristate "STMicroelectronics pressure sensor SPI Interface" 218 depends on SPI_MASTER && IIO_ST_PRESS 219 default SPI_MASTER && IIO_ST_PRESS 220 select IIO_ST_SENSORS_SPI 221 help 222 Build support for STMicroelectronics pressure sensor SPI interface. 223 224 To compile this driver as a module, choose M here. The module 225 will be called st_pressure_spi. 226 227config T5403 228 tristate "EPCOS T5403 digital barometric pressure sensor driver" 229 depends on I2C 230 help 231 Say yes here to build support for the EPCOS T5403 pressure sensor 232 connected via I2C. 233 234 To compile this driver as a module, choose M here: the module 235 will be called t5403. 236 237config HP206C 238 tristate "HOPERF HP206C precision barometer and altimeter sensor" 239 depends on I2C 240 help 241 Say yes here to build support for the HOPREF HP206C precision 242 barometer and altimeter sensor. 243 244 This driver can also be built as a module. If so, the module will 245 be called hp206c. 246 247config ZPA2326 248 tristate "Murata ZPA2326 pressure sensor driver" 249 select IIO_BUFFER 250 select IIO_TRIGGERED_BUFFER 251 select REGMAP 252 select ZPA2326_I2C if I2C 253 select ZPA2326_SPI if SPI_MASTER 254 help 255 Say Y here to build support for the Murata ZPA2326 pressure and 256 temperature sensor. 257 258 To compile this driver as a module, choose M here: the module will 259 be called zpa2326. 260 261config ZPA2326_I2C 262 tristate 263 select REGMAP_I2C 264 265config ZPA2326_SPI 266 tristate 267 select REGMAP_SPI 268 269endmenu 270