1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Pressure drivers 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Pressure sensors" 8 9config ABP060MG 10 tristate "Honeywell ABP pressure sensor driver" 11 depends on I2C 12 help 13 Say yes here to build support for the Honeywell ABP pressure 14 sensors. 15 16 To compile this driver as a module, choose M here: the module 17 will be called abp060mg. 18 19config BMP280 20 tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver" 21 depends on (I2C || SPI_MASTER) 22 select REGMAP 23 select BMP280_I2C if (I2C) 24 select BMP280_SPI if (SPI_MASTER) 25 help 26 Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380 27 and BMP580 pressure and temperature sensors. Also supports the BME280 with 28 an additional humidity sensor channel. 29 30 To compile this driver as a module, choose M here: the core module 31 will be called bmp280 and you will also get bmp280-i2c for I2C 32 and/or bmp280-spi for SPI support. 33 34config BMP280_I2C 35 tristate 36 depends on BMP280 37 depends on I2C 38 select REGMAP_I2C 39 40config BMP280_SPI 41 tristate 42 depends on BMP280 43 depends on SPI_MASTER 44 select REGMAP 45 46config IIO_CROS_EC_BARO 47 tristate "ChromeOS EC Barometer Sensor" 48 depends on IIO_CROS_EC_SENSORS_CORE 49 help 50 Say yes here to build support for the Barometer sensor when 51 presented by the ChromeOS EC Sensor hub. 52 53 To compile this driver as a module, choose M here: the module 54 will be called cros_ec_baro. 55 56config DLHL60D 57 tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors" 58 depends on I2C 59 select IIO_BUFFER 60 select IIO_TRIGGERED_BUFFER 61 help 62 Say yes here to build support for the All Sensors DLH series 63 pressure sensors driver. 64 65 To compile this driver as a module, choose M here: the module 66 will be called dlhl60d. 67 68config DPS310 69 tristate "Infineon DPS310 pressure and temperature sensor" 70 depends on I2C 71 select REGMAP_I2C 72 help 73 Support for the Infineon DPS310 digital barometric pressure sensor. 74 It can be accessed over I2C bus. 75 76 This driver can also be built as a module. If so, the module will be 77 called dps310. 78 79config HID_SENSOR_PRESS 80 depends on HID_SENSOR_HUB 81 select IIO_BUFFER 82 select HID_SENSOR_IIO_COMMON 83 select HID_SENSOR_IIO_TRIGGER 84 tristate "HID PRESS" 85 help 86 Say yes here to build support for the HID SENSOR 87 Pressure driver 88 89 To compile this driver as a module, choose M here: the module 90 will be called hid-sensor-press. 91 92config HP03 93 tristate "Hope RF HP03 temperature and pressure sensor driver" 94 depends on I2C 95 select REGMAP_I2C 96 help 97 Say yes here to build support for Hope RF HP03 pressure and 98 temperature sensor. 99 100 To compile this driver as a module, choose M here: the module 101 will be called hp03. 102 103config ICP10100 104 tristate "InvenSense ICP-101xx pressure and temperature sensor" 105 depends on I2C 106 select CRC8 107 help 108 Say yes here to build support for InvenSense ICP-101xx barometric 109 pressure and temperature sensor. 110 111 To compile this driver as a module, choose M here: the module 112 will be called icp10100. 113 114config MPL115 115 tristate 116 117config MPL115_I2C 118 tristate "Freescale MPL115A2 pressure sensor driver" 119 depends on I2C 120 select MPL115 121 help 122 Say yes here to build support for the Freescale MPL115A2 123 pressure sensor connected via I2C. 124 125 To compile this driver as a module, choose M here: the module 126 will be called mpl115_i2c. 127 128config MPL115_SPI 129 tristate "Freescale MPL115A1 pressure sensor driver" 130 depends on SPI_MASTER 131 select MPL115 132 help 133 Say yes here to build support for the Freescale MPL115A1 134 pressure sensor connected via SPI. 135 136 To compile this driver as a module, choose M here: the module 137 will be called mpl115_spi. 138 139config MPL3115 140 tristate "Freescale MPL3115A2 pressure sensor driver" 141 depends on I2C 142 select IIO_BUFFER 143 select IIO_TRIGGERED_BUFFER 144 help 145 Say yes here to build support for the Freescale MPL3115A2 146 pressure sensor / altimeter. 147 148 To compile this driver as a module, choose M here: the module 149 will be called mpl3115. 150 151config MPRLS0025PA 152 tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)" 153 depends on I2C 154 select IIO_BUFFER 155 select IIO_TRIGGERED_BUFFER 156 help 157 Say Y here to build support for the Honeywell MicroPressure pressure 158 sensor series. There are many different types with different pressure 159 range. These ranges can be set up in the device tree. 160 161 To compile this driver as a module, choose M here: the module will be 162 called mprls0025pa. 163 164config MS5611 165 tristate "Measurement Specialties MS5611 pressure sensor driver" 166 select IIO_BUFFER 167 select IIO_TRIGGERED_BUFFER 168 help 169 Say Y here to build support for the Measurement Specialties 170 MS5611, MS5607 pressure and temperature sensors. 171 172 To compile this driver as a module, choose M here: the module will 173 be called ms5611_core. 174 175config MS5611_I2C 176 tristate "support I2C bus connection" 177 depends on I2C && MS5611 178 help 179 Say Y here to build I2C bus support for MS5611. 180 181 To compile this driver as a module, choose M here: the module will 182 be called ms5611_i2c. 183 184config MS5611_SPI 185 tristate "support SPI bus connection" 186 depends on SPI_MASTER && MS5611 187 help 188 Say Y here to build SPI bus support for MS5611. 189 190 To compile this driver as a module, choose M here: the module will 191 be called ms5611_spi. 192 193config MS5637 194 tristate "Measurement Specialties MS5637 pressure & temperature sensor" 195 depends on I2C 196 select IIO_MS_SENSORS_I2C 197 help 198 If you say yes here you get support for the Measurement Specialties 199 MS5637 pressure and temperature sensor. 200 This driver is also used for MS8607 temperature, pressure & humidity 201 sensor 202 203 This driver can also be built as a module. If so, the module will 204 be called ms5637. 205 206config IIO_ST_PRESS 207 tristate "STMicroelectronics pressure sensor Driver" 208 depends on (I2C || SPI_MASTER) && SYSFS 209 select IIO_ST_SENSORS_CORE 210 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 211 help 212 Say yes here to build support for STMicroelectronics pressure 213 sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH. 214 215 Also need to enable at least one of I2C and SPI interface drivers 216 below. 217 218config IIO_ST_PRESS_I2C 219 tristate "STMicroelectronics pressure sensor I2C Interface" 220 depends on I2C && IIO_ST_PRESS 221 default I2C && IIO_ST_PRESS 222 select IIO_ST_SENSORS_I2C 223 help 224 Build support for STMicroelectronics pressure sensor I2C interface. 225 226 To compile this driver as a module, choose M here. The module 227 will be called st_pressure_i2c. 228 229config IIO_ST_PRESS_SPI 230 tristate "STMicroelectronics pressure sensor SPI Interface" 231 depends on SPI_MASTER && IIO_ST_PRESS 232 default SPI_MASTER && IIO_ST_PRESS 233 select IIO_ST_SENSORS_SPI 234 help 235 Build support for STMicroelectronics pressure sensor SPI interface. 236 237 To compile this driver as a module, choose M here. The module 238 will be called st_pressure_spi. 239 240config T5403 241 tristate "EPCOS T5403 digital barometric pressure sensor driver" 242 depends on I2C 243 help 244 Say yes here to build support for the EPCOS T5403 pressure sensor 245 connected via I2C. 246 247 To compile this driver as a module, choose M here: the module 248 will be called t5403. 249 250config HP206C 251 tristate "HOPERF HP206C precision barometer and altimeter sensor" 252 depends on I2C 253 help 254 Say yes here to build support for the HOPREF HP206C precision 255 barometer and altimeter sensor. 256 257 This driver can also be built as a module. If so, the module will 258 be called hp206c. 259 260config ZPA2326 261 tristate "Murata ZPA2326 pressure sensor driver" 262 select IIO_BUFFER 263 select IIO_TRIGGERED_BUFFER 264 select REGMAP 265 select ZPA2326_I2C if I2C 266 select ZPA2326_SPI if SPI_MASTER 267 help 268 Say Y here to build support for the Murata ZPA2326 pressure and 269 temperature sensor. 270 271 To compile this driver as a module, choose M here: the module will 272 be called zpa2326. 273 274config ZPA2326_I2C 275 tristate 276 select REGMAP_I2C 277 278config ZPA2326_SPI 279 tristate 280 select REGMAP_SPI 281 282endmenu 283