1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Pressure drivers 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Pressure sensors" 8 9config ABP060MG 10 tristate "Honeywell ABP pressure sensor driver" 11 depends on I2C 12 help 13 Say yes here to build support for the Honeywell ABP pressure 14 sensors. 15 16 To compile this driver as a module, choose M here: the module 17 will be called abp060mg. 18 19config BMP280 20 tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" 21 depends on (I2C || SPI_MASTER) 22 select REGMAP 23 select BMP280_I2C if (I2C) 24 select BMP280_SPI if (SPI_MASTER) 25 help 26 Say yes here to build support for Bosch Sensortec BMP180 and BMP280 27 pressure and temperature sensors. Also supports the BME280 with 28 an additional humidity sensor channel. 29 30 To compile this driver as a module, choose M here: the core module 31 will be called bmp280 and you will also get bmp280-i2c for I2C 32 and/or bmp280-spi for SPI support. 33 34config BMP280_I2C 35 tristate 36 depends on BMP280 37 depends on I2C 38 select REGMAP_I2C 39 40config BMP280_SPI 41 tristate 42 depends on BMP280 43 depends on SPI_MASTER 44 select REGMAP 45 46config IIO_CROS_EC_BARO 47 tristate "ChromeOS EC Barometer Sensor" 48 depends on IIO_CROS_EC_SENSORS_CORE 49 help 50 Say yes here to build support for the Barometer sensor when 51 presented by the ChromeOS EC Sensor hub. 52 53 To compile this driver as a module, choose M here: the module 54 will be called cros_ec_baro. 55 56config DLHL60D 57 tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors" 58 depends on I2C 59 select IIO_BUFFER 60 select IIO_TRIGGERED_BUFFER 61 help 62 Say yes here to build support for the All Sensors DLH series 63 pressure sensors driver. 64 65 To compile this driver as a module, choose M here: the module 66 will be called dlhl60d. 67 68config DPS310 69 tristate "Infineon DPS310 pressure and temperature sensor" 70 depends on I2C 71 select REGMAP_I2C 72 help 73 Support for the Infineon DPS310 digital barometric pressure sensor. 74 It can be accessed over I2C bus. 75 76 This driver can also be built as a module. If so, the module will be 77 called dps310. 78 79config HID_SENSOR_PRESS 80 depends on HID_SENSOR_HUB 81 select IIO_BUFFER 82 select IIO_TRIGGERED_BUFFER 83 select HID_SENSOR_IIO_COMMON 84 select HID_SENSOR_IIO_TRIGGER 85 tristate "HID PRESS" 86 help 87 Say yes here to build support for the HID SENSOR 88 Pressure driver 89 90 To compile this driver as a module, choose M here: the module 91 will be called hid-sensor-press. 92 93config HP03 94 tristate "Hope RF HP03 temperature and pressure sensor driver" 95 depends on I2C 96 select REGMAP_I2C 97 help 98 Say yes here to build support for Hope RF HP03 pressure and 99 temperature sensor. 100 101 To compile this driver as a module, choose M here: the module 102 will be called hp03. 103 104config MPL115 105 tristate 106 107config MPL115_I2C 108 tristate "Freescale MPL115A2 pressure sensor driver" 109 depends on I2C 110 select MPL115 111 help 112 Say yes here to build support for the Freescale MPL115A2 113 pressure sensor connected via I2C. 114 115 To compile this driver as a module, choose M here: the module 116 will be called mpl115_i2c. 117 118config MPL115_SPI 119 tristate "Freescale MPL115A1 pressure sensor driver" 120 depends on SPI_MASTER 121 select MPL115 122 help 123 Say yes here to build support for the Freescale MPL115A1 124 pressure sensor connected via SPI. 125 126 To compile this driver as a module, choose M here: the module 127 will be called mpl115_spi. 128 129config MPL3115 130 tristate "Freescale MPL3115A2 pressure sensor driver" 131 depends on I2C 132 select IIO_BUFFER 133 select IIO_TRIGGERED_BUFFER 134 help 135 Say yes here to build support for the Freescale MPL3115A2 136 pressure sensor / altimeter. 137 138 To compile this driver as a module, choose M here: the module 139 will be called mpl3115. 140 141config MS5611 142 tristate "Measurement Specialties MS5611 pressure sensor driver" 143 select IIO_BUFFER 144 select IIO_TRIGGERED_BUFFER 145 help 146 Say Y here to build support for the Measurement Specialties 147 MS5611, MS5607 pressure and temperature sensors. 148 149 To compile this driver as a module, choose M here: the module will 150 be called ms5611_core. 151 152config MS5611_I2C 153 tristate "support I2C bus connection" 154 depends on I2C && MS5611 155 help 156 Say Y here to build I2C bus support for MS5611. 157 158 To compile this driver as a module, choose M here: the module will 159 be called ms5611_i2c. 160 161config MS5611_SPI 162 tristate "support SPI bus connection" 163 depends on SPI_MASTER && MS5611 164 help 165 Say Y here to build SPI bus support for MS5611. 166 167 To compile this driver as a module, choose M here: the module will 168 be called ms5611_spi. 169 170config MS5637 171 tristate "Measurement Specialties MS5637 pressure & temperature sensor" 172 depends on I2C 173 select IIO_MS_SENSORS_I2C 174 help 175 If you say yes here you get support for the Measurement Specialties 176 MS5637 pressure and temperature sensor. 177 This driver is also used for MS8607 temperature, pressure & humidity 178 sensor 179 180 This driver can also be built as a module. If so, the module will 181 be called ms5637. 182 183config IIO_ST_PRESS 184 tristate "STMicroelectronics pressure sensor Driver" 185 depends on (I2C || SPI_MASTER) && SYSFS 186 select IIO_ST_SENSORS_CORE 187 select IIO_ST_PRESS_I2C if (I2C) 188 select IIO_ST_PRESS_SPI if (SPI_MASTER) 189 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 190 help 191 Say yes here to build support for STMicroelectronics pressure 192 sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH. 193 194 This driver can also be built as a module. If so, these modules 195 will be created: 196 - st_pressure (core functions for the driver [it is mandatory]); 197 - st_pressure_i2c (necessary for the I2C devices [optional*]); 198 - st_pressure_spi (necessary for the SPI devices [optional*]); 199 200 (*) one of these is necessary to do something. 201 202config IIO_ST_PRESS_I2C 203 tristate 204 depends on IIO_ST_PRESS 205 depends on IIO_ST_SENSORS_I2C 206 207config IIO_ST_PRESS_SPI 208 tristate 209 depends on IIO_ST_PRESS 210 depends on IIO_ST_SENSORS_SPI 211 212config T5403 213 tristate "EPCOS T5403 digital barometric pressure sensor driver" 214 depends on I2C 215 help 216 Say yes here to build support for the EPCOS T5403 pressure sensor 217 connected via I2C. 218 219 To compile this driver as a module, choose M here: the module 220 will be called t5403. 221 222config HP206C 223 tristate "HOPERF HP206C precision barometer and altimeter sensor" 224 depends on I2C 225 help 226 Say yes here to build support for the HOPREF HP206C precision 227 barometer and altimeter sensor. 228 229 This driver can also be built as a module. If so, the module will 230 be called hp206c. 231 232config ZPA2326 233 tristate "Murata ZPA2326 pressure sensor driver" 234 select IIO_BUFFER 235 select IIO_TRIGGERED_BUFFER 236 select REGMAP 237 select ZPA2326_I2C if I2C 238 select ZPA2326_SPI if SPI_MASTER 239 help 240 Say Y here to build support for the Murata ZPA2326 pressure and 241 temperature sensor. 242 243 To compile this driver as a module, choose M here: the module will 244 be called zpa2326. 245 246config ZPA2326_I2C 247 tristate 248 select REGMAP_I2C 249 250config ZPA2326_SPI 251 tristate 252 select REGMAP_SPI 253 254endmenu 255