1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Pressure drivers 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Pressure sensors" 8 9config ABP060MG 10 tristate "Honeywell ABP pressure sensor driver" 11 depends on I2C 12 help 13 Say yes here to build support for the Honeywell ABP pressure 14 sensors. 15 16 To compile this driver as a module, choose M here: the module 17 will be called abp060mg. 18 19config BMP280 20 tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" 21 depends on (I2C || SPI_MASTER) 22 select REGMAP 23 select BMP280_I2C if (I2C) 24 select BMP280_SPI if (SPI_MASTER) 25 help 26 Say yes here to build support for Bosch Sensortec BMP180 and BMP280 27 pressure and temperature sensors. Also supports the BME280 with 28 an additional humidity sensor channel. 29 30 To compile this driver as a module, choose M here: the core module 31 will be called bmp280 and you will also get bmp280-i2c for I2C 32 and/or bmp280-spi for SPI support. 33 34config BMP280_I2C 35 tristate 36 depends on BMP280 37 depends on I2C 38 select REGMAP_I2C 39 40config BMP280_SPI 41 tristate 42 depends on BMP280 43 depends on SPI_MASTER 44 select REGMAP 45 46config IIO_CROS_EC_BARO 47 tristate "ChromeOS EC Barometer Sensor" 48 depends on IIO_CROS_EC_SENSORS_CORE 49 help 50 Say yes here to build support for the Barometer sensor when 51 presented by the ChromeOS EC Sensor hub. 52 53 To compile this driver as a module, choose M here: the module 54 will be called cros_ec_baro. 55 56config DLHL60D 57 tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors" 58 depends on I2C 59 select IIO_BUFFER 60 select IIO_TRIGGERED_BUFFER 61 help 62 Say yes here to build support for the All Sensors DLH series 63 pressure sensors driver. 64 65 To compile this driver as a module, choose M here: the module 66 will be called dlhl60d. 67 68config DPS310 69 tristate "Infineon DPS310 pressure and temperature sensor" 70 depends on I2C 71 select REGMAP_I2C 72 help 73 Support for the Infineon DPS310 digital barometric pressure sensor. 74 It can be accessed over I2C bus. 75 76 This driver can also be built as a module. If so, the module will be 77 called dps310. 78 79config HID_SENSOR_PRESS 80 depends on HID_SENSOR_HUB 81 select IIO_BUFFER 82 select IIO_TRIGGERED_BUFFER 83 select HID_SENSOR_IIO_COMMON 84 select HID_SENSOR_IIO_TRIGGER 85 tristate "HID PRESS" 86 help 87 Say yes here to build support for the HID SENSOR 88 Pressure driver 89 90 To compile this driver as a module, choose M here: the module 91 will be called hid-sensor-press. 92 93config HP03 94 tristate "Hope RF HP03 temperature and pressure sensor driver" 95 depends on I2C 96 select REGMAP_I2C 97 help 98 Say yes here to build support for Hope RF HP03 pressure and 99 temperature sensor. 100 101 To compile this driver as a module, choose M here: the module 102 will be called hp03. 103 104config ICP10100 105 tristate "InvenSense ICP-101xx pressure and temperature sensor" 106 depends on I2C 107 select CRC8 108 help 109 Say yes here to build support for InvenSense ICP-101xx barometric 110 pressure and temperature sensor. 111 112 To compile this driver as a module, choose M here: the module 113 will be called icp10100. 114 115config MPL115 116 tristate 117 118config MPL115_I2C 119 tristate "Freescale MPL115A2 pressure sensor driver" 120 depends on I2C 121 select MPL115 122 help 123 Say yes here to build support for the Freescale MPL115A2 124 pressure sensor connected via I2C. 125 126 To compile this driver as a module, choose M here: the module 127 will be called mpl115_i2c. 128 129config MPL115_SPI 130 tristate "Freescale MPL115A1 pressure sensor driver" 131 depends on SPI_MASTER 132 select MPL115 133 help 134 Say yes here to build support for the Freescale MPL115A1 135 pressure sensor connected via SPI. 136 137 To compile this driver as a module, choose M here: the module 138 will be called mpl115_spi. 139 140config MPL3115 141 tristate "Freescale MPL3115A2 pressure sensor driver" 142 depends on I2C 143 select IIO_BUFFER 144 select IIO_TRIGGERED_BUFFER 145 help 146 Say yes here to build support for the Freescale MPL3115A2 147 pressure sensor / altimeter. 148 149 To compile this driver as a module, choose M here: the module 150 will be called mpl3115. 151 152config MS5611 153 tristate "Measurement Specialties MS5611 pressure sensor driver" 154 select IIO_BUFFER 155 select IIO_TRIGGERED_BUFFER 156 help 157 Say Y here to build support for the Measurement Specialties 158 MS5611, MS5607 pressure and temperature sensors. 159 160 To compile this driver as a module, choose M here: the module will 161 be called ms5611_core. 162 163config MS5611_I2C 164 tristate "support I2C bus connection" 165 depends on I2C && MS5611 166 help 167 Say Y here to build I2C bus support for MS5611. 168 169 To compile this driver as a module, choose M here: the module will 170 be called ms5611_i2c. 171 172config MS5611_SPI 173 tristate "support SPI bus connection" 174 depends on SPI_MASTER && MS5611 175 help 176 Say Y here to build SPI bus support for MS5611. 177 178 To compile this driver as a module, choose M here: the module will 179 be called ms5611_spi. 180 181config MS5637 182 tristate "Measurement Specialties MS5637 pressure & temperature sensor" 183 depends on I2C 184 select IIO_MS_SENSORS_I2C 185 help 186 If you say yes here you get support for the Measurement Specialties 187 MS5637 pressure and temperature sensor. 188 This driver is also used for MS8607 temperature, pressure & humidity 189 sensor 190 191 This driver can also be built as a module. If so, the module will 192 be called ms5637. 193 194config IIO_ST_PRESS 195 tristate "STMicroelectronics pressure sensor Driver" 196 depends on (I2C || SPI_MASTER) && SYSFS 197 select IIO_ST_SENSORS_CORE 198 select IIO_ST_PRESS_I2C if (I2C) 199 select IIO_ST_PRESS_SPI if (SPI_MASTER) 200 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 201 help 202 Say yes here to build support for STMicroelectronics pressure 203 sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH. 204 205 This driver can also be built as a module. If so, these modules 206 will be created: 207 - st_pressure (core functions for the driver [it is mandatory]); 208 - st_pressure_i2c (necessary for the I2C devices [optional*]); 209 - st_pressure_spi (necessary for the SPI devices [optional*]); 210 211 (*) one of these is necessary to do something. 212 213config IIO_ST_PRESS_I2C 214 tristate 215 depends on IIO_ST_PRESS 216 depends on IIO_ST_SENSORS_I2C 217 218config IIO_ST_PRESS_SPI 219 tristate 220 depends on IIO_ST_PRESS 221 depends on IIO_ST_SENSORS_SPI 222 223config T5403 224 tristate "EPCOS T5403 digital barometric pressure sensor driver" 225 depends on I2C 226 help 227 Say yes here to build support for the EPCOS T5403 pressure sensor 228 connected via I2C. 229 230 To compile this driver as a module, choose M here: the module 231 will be called t5403. 232 233config HP206C 234 tristate "HOPERF HP206C precision barometer and altimeter sensor" 235 depends on I2C 236 help 237 Say yes here to build support for the HOPREF HP206C precision 238 barometer and altimeter sensor. 239 240 This driver can also be built as a module. If so, the module will 241 be called hp206c. 242 243config ZPA2326 244 tristate "Murata ZPA2326 pressure sensor driver" 245 select IIO_BUFFER 246 select IIO_TRIGGERED_BUFFER 247 select REGMAP 248 select ZPA2326_I2C if I2C 249 select ZPA2326_SPI if SPI_MASTER 250 help 251 Say Y here to build support for the Murata ZPA2326 pressure and 252 temperature sensor. 253 254 To compile this driver as a module, choose M here: the module will 255 be called zpa2326. 256 257config ZPA2326_I2C 258 tristate 259 select REGMAP_I2C 260 261config ZPA2326_SPI 262 tristate 263 select REGMAP_SPI 264 265endmenu 266