1 /* 2 * HID Sensors Driver 3 * Copyright (c) 2013, Intel Corporation. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms and conditions of the GNU General Public License, 7 * version 2, as published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program; if not, write to the Free Software Foundation, Inc. 16 * 17 */ 18 19 #include <linux/device.h> 20 #include <linux/platform_device.h> 21 #include <linux/module.h> 22 #include <linux/interrupt.h> 23 #include <linux/irq.h> 24 #include <linux/slab.h> 25 #include <linux/delay.h> 26 #include <linux/hid-sensor-hub.h> 27 #include <linux/iio/iio.h> 28 #include <linux/iio/sysfs.h> 29 #include <linux/iio/buffer.h> 30 #include <linux/iio/trigger_consumer.h> 31 #include <linux/iio/triggered_buffer.h> 32 #include "../common/hid-sensors/hid-sensor-trigger.h" 33 34 enum incl_3d_channel { 35 CHANNEL_SCAN_INDEX_X, 36 CHANNEL_SCAN_INDEX_Y, 37 CHANNEL_SCAN_INDEX_Z, 38 INCLI_3D_CHANNEL_MAX, 39 }; 40 41 struct incl_3d_state { 42 struct hid_sensor_hub_callbacks callbacks; 43 struct hid_sensor_common common_attributes; 44 struct hid_sensor_hub_attribute_info incl[INCLI_3D_CHANNEL_MAX]; 45 u32 incl_val[INCLI_3D_CHANNEL_MAX]; 46 int scale_pre_decml; 47 int scale_post_decml; 48 int scale_precision; 49 int value_offset; 50 }; 51 52 static const u32 incl_3d_addresses[INCLI_3D_CHANNEL_MAX] = { 53 HID_USAGE_SENSOR_ORIENT_TILT_X, 54 HID_USAGE_SENSOR_ORIENT_TILT_Y, 55 HID_USAGE_SENSOR_ORIENT_TILT_Z 56 }; 57 58 /* Channel definitions */ 59 static const struct iio_chan_spec incl_3d_channels[] = { 60 { 61 .type = IIO_INCLI, 62 .modified = 1, 63 .channel2 = IIO_MOD_X, 64 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 65 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 66 BIT(IIO_CHAN_INFO_SCALE) | 67 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 68 BIT(IIO_CHAN_INFO_HYSTERESIS), 69 .scan_index = CHANNEL_SCAN_INDEX_X, 70 }, { 71 .type = IIO_INCLI, 72 .modified = 1, 73 .channel2 = IIO_MOD_Y, 74 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 75 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 76 BIT(IIO_CHAN_INFO_SCALE) | 77 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 78 BIT(IIO_CHAN_INFO_HYSTERESIS), 79 .scan_index = CHANNEL_SCAN_INDEX_Y, 80 }, { 81 .type = IIO_INCLI, 82 .modified = 1, 83 .channel2 = IIO_MOD_Z, 84 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 85 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 86 BIT(IIO_CHAN_INFO_SCALE) | 87 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 88 BIT(IIO_CHAN_INFO_HYSTERESIS), 89 .scan_index = CHANNEL_SCAN_INDEX_Z, 90 } 91 }; 92 93 /* Adjust channel real bits based on report descriptor */ 94 static void incl_3d_adjust_channel_bit_mask(struct iio_chan_spec *chan, 95 int size) 96 { 97 chan->scan_type.sign = 's'; 98 /* Real storage bits will change based on the report desc. */ 99 chan->scan_type.realbits = size * 8; 100 /* Maximum size of a sample to capture is u32 */ 101 chan->scan_type.storagebits = sizeof(u32) * 8; 102 } 103 104 /* Channel read_raw handler */ 105 static int incl_3d_read_raw(struct iio_dev *indio_dev, 106 struct iio_chan_spec const *chan, 107 int *val, int *val2, 108 long mask) 109 { 110 struct incl_3d_state *incl_state = iio_priv(indio_dev); 111 int report_id = -1; 112 u32 address; 113 int ret_type; 114 115 *val = 0; 116 *val2 = 0; 117 switch (mask) { 118 case IIO_CHAN_INFO_RAW: 119 hid_sensor_power_state(&incl_state->common_attributes, true); 120 report_id = 121 incl_state->incl[chan->scan_index].report_id; 122 address = incl_3d_addresses[chan->scan_index]; 123 if (report_id >= 0) 124 *val = sensor_hub_input_attr_get_raw_value( 125 incl_state->common_attributes.hsdev, 126 HID_USAGE_SENSOR_INCLINOMETER_3D, address, 127 report_id, 128 SENSOR_HUB_SYNC); 129 else { 130 hid_sensor_power_state(&incl_state->common_attributes, 131 false); 132 return -EINVAL; 133 } 134 hid_sensor_power_state(&incl_state->common_attributes, false); 135 ret_type = IIO_VAL_INT; 136 break; 137 case IIO_CHAN_INFO_SCALE: 138 *val = incl_state->scale_pre_decml; 139 *val2 = incl_state->scale_post_decml; 140 ret_type = incl_state->scale_precision; 141 break; 142 case IIO_CHAN_INFO_OFFSET: 143 *val = incl_state->value_offset; 144 ret_type = IIO_VAL_INT; 145 break; 146 case IIO_CHAN_INFO_SAMP_FREQ: 147 ret_type = hid_sensor_read_samp_freq_value( 148 &incl_state->common_attributes, val, val2); 149 break; 150 case IIO_CHAN_INFO_HYSTERESIS: 151 ret_type = hid_sensor_read_raw_hyst_value( 152 &incl_state->common_attributes, val, val2); 153 break; 154 default: 155 ret_type = -EINVAL; 156 break; 157 } 158 159 return ret_type; 160 } 161 162 /* Channel write_raw handler */ 163 static int incl_3d_write_raw(struct iio_dev *indio_dev, 164 struct iio_chan_spec const *chan, 165 int val, 166 int val2, 167 long mask) 168 { 169 struct incl_3d_state *incl_state = iio_priv(indio_dev); 170 int ret; 171 172 switch (mask) { 173 case IIO_CHAN_INFO_SAMP_FREQ: 174 ret = hid_sensor_write_samp_freq_value( 175 &incl_state->common_attributes, val, val2); 176 break; 177 case IIO_CHAN_INFO_HYSTERESIS: 178 ret = hid_sensor_write_raw_hyst_value( 179 &incl_state->common_attributes, val, val2); 180 break; 181 default: 182 ret = -EINVAL; 183 } 184 185 return ret; 186 } 187 188 static const struct iio_info incl_3d_info = { 189 .read_raw = &incl_3d_read_raw, 190 .write_raw = &incl_3d_write_raw, 191 }; 192 193 /* Function to push data to buffer */ 194 static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len) 195 { 196 dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); 197 iio_push_to_buffers(indio_dev, (u8 *)data); 198 } 199 200 /* Callback handler to send event after all samples are received and captured */ 201 static int incl_3d_proc_event(struct hid_sensor_hub_device *hsdev, 202 unsigned usage_id, 203 void *priv) 204 { 205 struct iio_dev *indio_dev = platform_get_drvdata(priv); 206 struct incl_3d_state *incl_state = iio_priv(indio_dev); 207 208 dev_dbg(&indio_dev->dev, "incl_3d_proc_event\n"); 209 if (atomic_read(&incl_state->common_attributes.data_ready)) 210 hid_sensor_push_data(indio_dev, 211 (u8 *)incl_state->incl_val, 212 sizeof(incl_state->incl_val)); 213 214 return 0; 215 } 216 217 /* Capture samples in local storage */ 218 static int incl_3d_capture_sample(struct hid_sensor_hub_device *hsdev, 219 unsigned usage_id, 220 size_t raw_len, char *raw_data, 221 void *priv) 222 { 223 struct iio_dev *indio_dev = platform_get_drvdata(priv); 224 struct incl_3d_state *incl_state = iio_priv(indio_dev); 225 int ret = 0; 226 227 switch (usage_id) { 228 case HID_USAGE_SENSOR_ORIENT_TILT_X: 229 incl_state->incl_val[CHANNEL_SCAN_INDEX_X] = *(u32 *)raw_data; 230 break; 231 case HID_USAGE_SENSOR_ORIENT_TILT_Y: 232 incl_state->incl_val[CHANNEL_SCAN_INDEX_Y] = *(u32 *)raw_data; 233 break; 234 case HID_USAGE_SENSOR_ORIENT_TILT_Z: 235 incl_state->incl_val[CHANNEL_SCAN_INDEX_Z] = *(u32 *)raw_data; 236 break; 237 default: 238 ret = -EINVAL; 239 break; 240 } 241 242 return ret; 243 } 244 245 /* Parse report which is specific to an usage id*/ 246 static int incl_3d_parse_report(struct platform_device *pdev, 247 struct hid_sensor_hub_device *hsdev, 248 struct iio_chan_spec *channels, 249 unsigned usage_id, 250 struct incl_3d_state *st) 251 { 252 int ret; 253 254 ret = sensor_hub_input_get_attribute_info(hsdev, 255 HID_INPUT_REPORT, 256 usage_id, 257 HID_USAGE_SENSOR_ORIENT_TILT_X, 258 &st->incl[CHANNEL_SCAN_INDEX_X]); 259 if (ret) 260 return ret; 261 incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_X], 262 st->incl[CHANNEL_SCAN_INDEX_X].size); 263 264 ret = sensor_hub_input_get_attribute_info(hsdev, 265 HID_INPUT_REPORT, 266 usage_id, 267 HID_USAGE_SENSOR_ORIENT_TILT_Y, 268 &st->incl[CHANNEL_SCAN_INDEX_Y]); 269 if (ret) 270 return ret; 271 incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Y], 272 st->incl[CHANNEL_SCAN_INDEX_Y].size); 273 274 ret = sensor_hub_input_get_attribute_info(hsdev, 275 HID_INPUT_REPORT, 276 usage_id, 277 HID_USAGE_SENSOR_ORIENT_TILT_Z, 278 &st->incl[CHANNEL_SCAN_INDEX_Z]); 279 if (ret) 280 return ret; 281 incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Z], 282 st->incl[CHANNEL_SCAN_INDEX_Z].size); 283 284 dev_dbg(&pdev->dev, "incl_3d %x:%x, %x:%x, %x:%x\n", 285 st->incl[0].index, 286 st->incl[0].report_id, 287 st->incl[1].index, st->incl[1].report_id, 288 st->incl[2].index, st->incl[2].report_id); 289 290 st->scale_precision = hid_sensor_format_scale( 291 HID_USAGE_SENSOR_INCLINOMETER_3D, 292 &st->incl[CHANNEL_SCAN_INDEX_X], 293 &st->scale_pre_decml, &st->scale_post_decml); 294 295 /* Set Sensitivity field ids, when there is no individual modifier */ 296 if (st->common_attributes.sensitivity.index < 0) { 297 sensor_hub_input_get_attribute_info(hsdev, 298 HID_FEATURE_REPORT, usage_id, 299 HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | 300 HID_USAGE_SENSOR_DATA_ORIENTATION, 301 &st->common_attributes.sensitivity); 302 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", 303 st->common_attributes.sensitivity.index, 304 st->common_attributes.sensitivity.report_id); 305 } 306 return ret; 307 } 308 309 /* Function to initialize the processing for usage id */ 310 static int hid_incl_3d_probe(struct platform_device *pdev) 311 { 312 int ret; 313 static char *name = "incli_3d"; 314 struct iio_dev *indio_dev; 315 struct incl_3d_state *incl_state; 316 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 317 318 indio_dev = devm_iio_device_alloc(&pdev->dev, 319 sizeof(struct incl_3d_state)); 320 if (indio_dev == NULL) 321 return -ENOMEM; 322 323 platform_set_drvdata(pdev, indio_dev); 324 325 incl_state = iio_priv(indio_dev); 326 incl_state->common_attributes.hsdev = hsdev; 327 incl_state->common_attributes.pdev = pdev; 328 329 ret = hid_sensor_parse_common_attributes(hsdev, 330 HID_USAGE_SENSOR_INCLINOMETER_3D, 331 &incl_state->common_attributes); 332 if (ret) { 333 dev_err(&pdev->dev, "failed to setup common attributes\n"); 334 return ret; 335 } 336 337 indio_dev->channels = kmemdup(incl_3d_channels, 338 sizeof(incl_3d_channels), GFP_KERNEL); 339 if (!indio_dev->channels) { 340 dev_err(&pdev->dev, "failed to duplicate channels\n"); 341 return -ENOMEM; 342 } 343 344 ret = incl_3d_parse_report(pdev, hsdev, 345 (struct iio_chan_spec *)indio_dev->channels, 346 HID_USAGE_SENSOR_INCLINOMETER_3D, 347 incl_state); 348 if (ret) { 349 dev_err(&pdev->dev, "failed to setup attributes\n"); 350 goto error_free_dev_mem; 351 } 352 353 indio_dev->num_channels = ARRAY_SIZE(incl_3d_channels); 354 indio_dev->dev.parent = &pdev->dev; 355 indio_dev->info = &incl_3d_info; 356 indio_dev->name = name; 357 indio_dev->modes = INDIO_DIRECT_MODE; 358 359 ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, 360 NULL, NULL); 361 if (ret) { 362 dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); 363 goto error_free_dev_mem; 364 } 365 atomic_set(&incl_state->common_attributes.data_ready, 0); 366 ret = hid_sensor_setup_trigger(indio_dev, name, 367 &incl_state->common_attributes); 368 if (ret) { 369 dev_err(&pdev->dev, "trigger setup failed\n"); 370 goto error_unreg_buffer_funcs; 371 } 372 373 ret = iio_device_register(indio_dev); 374 if (ret) { 375 dev_err(&pdev->dev, "device register failed\n"); 376 goto error_remove_trigger; 377 } 378 379 incl_state->callbacks.send_event = incl_3d_proc_event; 380 incl_state->callbacks.capture_sample = incl_3d_capture_sample; 381 incl_state->callbacks.pdev = pdev; 382 ret = sensor_hub_register_callback(hsdev, 383 HID_USAGE_SENSOR_INCLINOMETER_3D, 384 &incl_state->callbacks); 385 if (ret) { 386 dev_err(&pdev->dev, "callback reg failed\n"); 387 goto error_iio_unreg; 388 } 389 390 return 0; 391 392 error_iio_unreg: 393 iio_device_unregister(indio_dev); 394 error_remove_trigger: 395 hid_sensor_remove_trigger(&incl_state->common_attributes); 396 error_unreg_buffer_funcs: 397 iio_triggered_buffer_cleanup(indio_dev); 398 error_free_dev_mem: 399 kfree(indio_dev->channels); 400 return ret; 401 } 402 403 /* Function to deinitialize the processing for usage id */ 404 static int hid_incl_3d_remove(struct platform_device *pdev) 405 { 406 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 407 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 408 struct incl_3d_state *incl_state = iio_priv(indio_dev); 409 410 sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D); 411 iio_device_unregister(indio_dev); 412 hid_sensor_remove_trigger(&incl_state->common_attributes); 413 iio_triggered_buffer_cleanup(indio_dev); 414 kfree(indio_dev->channels); 415 416 return 0; 417 } 418 419 static const struct platform_device_id hid_incl_3d_ids[] = { 420 { 421 /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ 422 .name = "HID-SENSOR-200086", 423 }, 424 { /* sentinel */ } 425 }; 426 MODULE_DEVICE_TABLE(platform, hid_incl_3d_ids); 427 428 static struct platform_driver hid_incl_3d_platform_driver = { 429 .id_table = hid_incl_3d_ids, 430 .driver = { 431 .name = KBUILD_MODNAME, 432 .pm = &hid_sensor_pm_ops, 433 }, 434 .probe = hid_incl_3d_probe, 435 .remove = hid_incl_3d_remove, 436 }; 437 module_platform_driver(hid_incl_3d_platform_driver); 438 439 MODULE_DESCRIPTION("HID Sensor Inclinometer 3D"); 440 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); 441 MODULE_LICENSE("GPL"); 442