1 /*
2  * mag3110.c - Support for Freescale MAG3110 magnetometer sensor
3  *
4  * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net>
5  *
6  * This file is subject to the terms and conditions of version 2 of
7  * the GNU General Public License.  See the file COPYING in the main
8  * directory of this archive for more details.
9  *
10  * (7-bit I2C slave address 0x0e)
11  *
12  * TODO: irq, user offset, oversampling, continuous mode
13  */
14 
15 #include <linux/module.h>
16 #include <linux/i2c.h>
17 #include <linux/iio/iio.h>
18 #include <linux/iio/sysfs.h>
19 #include <linux/iio/trigger_consumer.h>
20 #include <linux/iio/buffer.h>
21 #include <linux/iio/triggered_buffer.h>
22 #include <linux/delay.h>
23 
24 #define MAG3110_STATUS 0x00
25 #define MAG3110_OUT_X 0x01 /* MSB first */
26 #define MAG3110_OUT_Y 0x03
27 #define MAG3110_OUT_Z 0x05
28 #define MAG3110_WHO_AM_I 0x07
29 #define MAG3110_OFF_X 0x09 /* MSB first */
30 #define MAG3110_OFF_Y 0x0b
31 #define MAG3110_OFF_Z 0x0d
32 #define MAG3110_DIE_TEMP 0x0f
33 #define MAG3110_CTRL_REG1 0x10
34 #define MAG3110_CTRL_REG2 0x11
35 
36 #define MAG3110_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
37 
38 #define MAG3110_CTRL_DR_MASK (BIT(7) | BIT(6) | BIT(5))
39 #define MAG3110_CTRL_DR_SHIFT 5
40 #define MAG3110_CTRL_DR_DEFAULT 0
41 
42 #define MAG3110_CTRL_TM BIT(1) /* trigger single measurement */
43 #define MAG3110_CTRL_AC BIT(0) /* continuous measurements */
44 
45 #define MAG3110_CTRL_AUTO_MRST_EN BIT(7) /* magnetic auto-reset */
46 #define MAG3110_CTRL_RAW BIT(5) /* measurements not user-offset corrected */
47 
48 #define MAG3110_DEVICE_ID 0xc4
49 
50 /* Each client has this additional data */
51 struct mag3110_data {
52 	struct i2c_client *client;
53 	struct mutex lock;
54 	u8 ctrl_reg1;
55 };
56 
57 static int mag3110_request(struct mag3110_data *data)
58 {
59 	int ret, tries = 150;
60 
61 	/* trigger measurement */
62 	ret = i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
63 		data->ctrl_reg1 | MAG3110_CTRL_TM);
64 	if (ret < 0)
65 		return ret;
66 
67 	while (tries-- > 0) {
68 		ret = i2c_smbus_read_byte_data(data->client, MAG3110_STATUS);
69 		if (ret < 0)
70 			return ret;
71 		/* wait for data ready */
72 		if ((ret & MAG3110_STATUS_DRDY) == MAG3110_STATUS_DRDY)
73 			break;
74 		msleep(20);
75 	}
76 
77 	if (tries < 0) {
78 		dev_err(&data->client->dev, "data not ready\n");
79 		return -EIO;
80 	}
81 
82 	return 0;
83 }
84 
85 static int mag3110_read(struct mag3110_data *data, __be16 buf[3])
86 {
87 	int ret;
88 
89 	mutex_lock(&data->lock);
90 	ret = mag3110_request(data);
91 	if (ret < 0) {
92 		mutex_unlock(&data->lock);
93 		return ret;
94 	}
95 	ret = i2c_smbus_read_i2c_block_data(data->client,
96 		MAG3110_OUT_X, 3 * sizeof(__be16), (u8 *) buf);
97 	mutex_unlock(&data->lock);
98 
99 	return ret;
100 }
101 
102 static ssize_t mag3110_show_int_plus_micros(char *buf,
103 	const int (*vals)[2], int n)
104 {
105 	size_t len = 0;
106 
107 	while (n-- > 0)
108 		len += scnprintf(buf + len, PAGE_SIZE - len,
109 			"%d.%06d ", vals[n][0], vals[n][1]);
110 
111 	/* replace trailing space by newline */
112 	buf[len - 1] = '\n';
113 
114 	return len;
115 }
116 
117 static int mag3110_get_int_plus_micros_index(const int (*vals)[2], int n,
118 					int val, int val2)
119 {
120 	while (n-- > 0)
121 		if (val == vals[n][0] && val2 == vals[n][1])
122 			return n;
123 
124 	return -EINVAL;
125 }
126 
127 static const int mag3110_samp_freq[8][2] = {
128 	{80, 0}, {40, 0}, {20, 0}, {10, 0}, {5, 0}, {2, 500000},
129 	{1, 250000}, {0, 625000}
130 };
131 
132 static ssize_t mag3110_show_samp_freq_avail(struct device *dev,
133 				struct device_attribute *attr, char *buf)
134 {
135 	return mag3110_show_int_plus_micros(buf, mag3110_samp_freq, 8);
136 }
137 
138 static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mag3110_show_samp_freq_avail);
139 
140 static int mag3110_get_samp_freq_index(struct mag3110_data *data,
141 	int val, int val2)
142 {
143 	return mag3110_get_int_plus_micros_index(mag3110_samp_freq, 8, val,
144 		val2);
145 }
146 
147 static int mag3110_read_raw(struct iio_dev *indio_dev,
148 			    struct iio_chan_spec const *chan,
149 			    int *val, int *val2, long mask)
150 {
151 	struct mag3110_data *data = iio_priv(indio_dev);
152 	__be16 buffer[3];
153 	int i, ret;
154 
155 	switch (mask) {
156 	case IIO_CHAN_INFO_RAW:
157 		ret = iio_device_claim_direct_mode(indio_dev);
158 		if (ret)
159 			return ret;
160 
161 		switch (chan->type) {
162 		case IIO_MAGN: /* in 0.1 uT / LSB */
163 			ret = mag3110_read(data, buffer);
164 			if (ret < 0)
165 				goto release;
166 			*val = sign_extend32(
167 				be16_to_cpu(buffer[chan->scan_index]), 15);
168 			ret = IIO_VAL_INT;
169 			break;
170 		case IIO_TEMP: /* in 1 C / LSB */
171 			mutex_lock(&data->lock);
172 			ret = mag3110_request(data);
173 			if (ret < 0) {
174 				mutex_unlock(&data->lock);
175 				goto release;
176 			}
177 			ret = i2c_smbus_read_byte_data(data->client,
178 				MAG3110_DIE_TEMP);
179 			mutex_unlock(&data->lock);
180 			if (ret < 0)
181 				goto release;
182 			*val = sign_extend32(ret, 7);
183 			ret = IIO_VAL_INT;
184 			break;
185 		default:
186 			ret = -EINVAL;
187 		}
188 release:
189 		iio_device_release_direct_mode(indio_dev);
190 		return ret;
191 
192 	case IIO_CHAN_INFO_SCALE:
193 		switch (chan->type) {
194 		case IIO_MAGN:
195 			*val = 0;
196 			*val2 = 1000;
197 			return IIO_VAL_INT_PLUS_MICRO;
198 		case IIO_TEMP:
199 			*val = 1000;
200 			return IIO_VAL_INT;
201 		default:
202 			return -EINVAL;
203 		}
204 	case IIO_CHAN_INFO_SAMP_FREQ:
205 		i = data->ctrl_reg1 >> MAG3110_CTRL_DR_SHIFT;
206 		*val = mag3110_samp_freq[i][0];
207 		*val2 = mag3110_samp_freq[i][1];
208 		return IIO_VAL_INT_PLUS_MICRO;
209 	case IIO_CHAN_INFO_CALIBBIAS:
210 		ret = i2c_smbus_read_word_swapped(data->client,
211 			MAG3110_OFF_X +	2 * chan->scan_index);
212 		if (ret < 0)
213 			return ret;
214 		*val = sign_extend32(ret >> 1, 14);
215 		return IIO_VAL_INT;
216 	}
217 	return -EINVAL;
218 }
219 
220 static int mag3110_write_raw(struct iio_dev *indio_dev,
221 			     struct iio_chan_spec const *chan,
222 			     int val, int val2, long mask)
223 {
224 	struct mag3110_data *data = iio_priv(indio_dev);
225 	int rate, ret;
226 
227 	ret = iio_device_claim_direct_mode(indio_dev);
228 	if (ret)
229 		return ret;
230 
231 	switch (mask) {
232 	case IIO_CHAN_INFO_SAMP_FREQ:
233 		rate = mag3110_get_samp_freq_index(data, val, val2);
234 		if (rate < 0) {
235 			ret = -EINVAL;
236 			break;
237 		}
238 
239 		data->ctrl_reg1 &= ~MAG3110_CTRL_DR_MASK;
240 		data->ctrl_reg1 |= rate << MAG3110_CTRL_DR_SHIFT;
241 		ret = i2c_smbus_write_byte_data(data->client,
242 			MAG3110_CTRL_REG1, data->ctrl_reg1);
243 		break;
244 	case IIO_CHAN_INFO_CALIBBIAS:
245 		if (val < -10000 || val > 10000) {
246 			ret = -EINVAL;
247 			break;
248 		}
249 		ret = i2c_smbus_write_word_swapped(data->client,
250 			MAG3110_OFF_X + 2 * chan->scan_index, val << 1);
251 		break;
252 	default:
253 		ret = -EINVAL;
254 		break;
255 	}
256 	iio_device_release_direct_mode(indio_dev);
257 	return ret;
258 }
259 
260 static irqreturn_t mag3110_trigger_handler(int irq, void *p)
261 {
262 	struct iio_poll_func *pf = p;
263 	struct iio_dev *indio_dev = pf->indio_dev;
264 	struct mag3110_data *data = iio_priv(indio_dev);
265 	u8 buffer[16]; /* 3 16-bit channels + 1 byte temp + padding + ts */
266 	int ret;
267 
268 	ret = mag3110_read(data, (__be16 *) buffer);
269 	if (ret < 0)
270 		goto done;
271 
272 	if (test_bit(3, indio_dev->active_scan_mask)) {
273 		ret = i2c_smbus_read_byte_data(data->client,
274 			MAG3110_DIE_TEMP);
275 		if (ret < 0)
276 			goto done;
277 		buffer[6] = ret;
278 	}
279 
280 	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
281 		iio_get_time_ns(indio_dev));
282 
283 done:
284 	iio_trigger_notify_done(indio_dev->trig);
285 	return IRQ_HANDLED;
286 }
287 
288 #define MAG3110_CHANNEL(axis, idx) { \
289 	.type = IIO_MAGN, \
290 	.modified = 1, \
291 	.channel2 = IIO_MOD_##axis, \
292 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
293 		BIT(IIO_CHAN_INFO_CALIBBIAS), \
294 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
295 		BIT(IIO_CHAN_INFO_SCALE), \
296 	.scan_index = idx, \
297 	.scan_type = { \
298 		.sign = 's', \
299 		.realbits = 16, \
300 		.storagebits = 16, \
301 		.endianness = IIO_BE, \
302 	}, \
303 }
304 
305 static const struct iio_chan_spec mag3110_channels[] = {
306 	MAG3110_CHANNEL(X, 0),
307 	MAG3110_CHANNEL(Y, 1),
308 	MAG3110_CHANNEL(Z, 2),
309 	{
310 		.type = IIO_TEMP,
311 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
312 			BIT(IIO_CHAN_INFO_SCALE),
313 		.scan_index = 3,
314 		.scan_type = {
315 			.sign = 's',
316 			.realbits = 8,
317 			.storagebits = 8,
318 			},
319 	},
320 	IIO_CHAN_SOFT_TIMESTAMP(4),
321 };
322 
323 static struct attribute *mag3110_attributes[] = {
324 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
325 	NULL
326 };
327 
328 static const struct attribute_group mag3110_group = {
329 	.attrs = mag3110_attributes,
330 };
331 
332 static const struct iio_info mag3110_info = {
333 	.attrs = &mag3110_group,
334 	.read_raw = &mag3110_read_raw,
335 	.write_raw = &mag3110_write_raw,
336 };
337 
338 static const unsigned long mag3110_scan_masks[] = {0x7, 0xf, 0};
339 
340 static int mag3110_standby(struct mag3110_data *data)
341 {
342 	return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
343 		data->ctrl_reg1 & ~MAG3110_CTRL_AC);
344 }
345 
346 static int mag3110_probe(struct i2c_client *client,
347 			 const struct i2c_device_id *id)
348 {
349 	struct mag3110_data *data;
350 	struct iio_dev *indio_dev;
351 	int ret;
352 
353 	ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
354 	if (ret < 0)
355 		return ret;
356 	if (ret != MAG3110_DEVICE_ID)
357 		return -ENODEV;
358 
359 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
360 	if (!indio_dev)
361 		return -ENOMEM;
362 
363 	data = iio_priv(indio_dev);
364 	data->client = client;
365 	mutex_init(&data->lock);
366 
367 	i2c_set_clientdata(client, indio_dev);
368 	indio_dev->info = &mag3110_info;
369 	indio_dev->name = id->name;
370 	indio_dev->dev.parent = &client->dev;
371 	indio_dev->modes = INDIO_DIRECT_MODE;
372 	indio_dev->channels = mag3110_channels;
373 	indio_dev->num_channels = ARRAY_SIZE(mag3110_channels);
374 	indio_dev->available_scan_masks = mag3110_scan_masks;
375 
376 	data->ctrl_reg1 = MAG3110_CTRL_DR_DEFAULT << MAG3110_CTRL_DR_SHIFT;
377 	ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG1,
378 		data->ctrl_reg1);
379 	if (ret < 0)
380 		return ret;
381 
382 	ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
383 		MAG3110_CTRL_AUTO_MRST_EN);
384 	if (ret < 0)
385 		goto standby_on_error;
386 
387 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
388 		mag3110_trigger_handler, NULL);
389 	if (ret < 0)
390 		goto standby_on_error;
391 
392 	ret = iio_device_register(indio_dev);
393 	if (ret < 0)
394 		goto buffer_cleanup;
395 	return 0;
396 
397 buffer_cleanup:
398 	iio_triggered_buffer_cleanup(indio_dev);
399 standby_on_error:
400 	mag3110_standby(iio_priv(indio_dev));
401 	return ret;
402 }
403 
404 static int mag3110_remove(struct i2c_client *client)
405 {
406 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
407 
408 	iio_device_unregister(indio_dev);
409 	iio_triggered_buffer_cleanup(indio_dev);
410 	mag3110_standby(iio_priv(indio_dev));
411 
412 	return 0;
413 }
414 
415 #ifdef CONFIG_PM_SLEEP
416 static int mag3110_suspend(struct device *dev)
417 {
418 	return mag3110_standby(iio_priv(i2c_get_clientdata(
419 		to_i2c_client(dev))));
420 }
421 
422 static int mag3110_resume(struct device *dev)
423 {
424 	struct mag3110_data *data = iio_priv(i2c_get_clientdata(
425 		to_i2c_client(dev)));
426 
427 	return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
428 		data->ctrl_reg1);
429 }
430 
431 static SIMPLE_DEV_PM_OPS(mag3110_pm_ops, mag3110_suspend, mag3110_resume);
432 #define MAG3110_PM_OPS (&mag3110_pm_ops)
433 #else
434 #define MAG3110_PM_OPS NULL
435 #endif
436 
437 static const struct i2c_device_id mag3110_id[] = {
438 	{ "mag3110", 0 },
439 	{ }
440 };
441 MODULE_DEVICE_TABLE(i2c, mag3110_id);
442 
443 static const struct of_device_id mag3110_of_match[] = {
444 	{ .compatible = "fsl,mag3110" },
445 	{ }
446 };
447 MODULE_DEVICE_TABLE(of, mag3110_of_match);
448 
449 static struct i2c_driver mag3110_driver = {
450 	.driver = {
451 		.name	= "mag3110",
452 		.of_match_table = mag3110_of_match,
453 		.pm	= MAG3110_PM_OPS,
454 	},
455 	.probe = mag3110_probe,
456 	.remove = mag3110_remove,
457 	.id_table = mag3110_id,
458 };
459 module_i2c_driver(mag3110_driver);
460 
461 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
462 MODULE_DESCRIPTION("Freescale MAG3110 magnetometer driver");
463 MODULE_LICENSE("GPL");
464