1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Magnetometer sensors 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Magnetometer sensors" 8 9config AK8974 10 tristate "Asahi Kasei AK8974 3-Axis Magnetometer" 11 depends on I2C 12 depends on OF 13 select REGMAP_I2C 14 select IIO_BUFFER 15 select IIO_TRIGGERED_BUFFER 16 help 17 Say yes here to build support for Asahi Kasei AK8974, AMI305 or 18 AMI306 I2C-based 3-axis magnetometer chips. 19 20 To compile this driver as a module, choose M here: the module 21 will be called ak8974. 22 23config AK8975 24 tristate "Asahi Kasei AK8975 3-Axis Magnetometer" 25 depends on I2C 26 depends on GPIOLIB || COMPILE_TEST 27 select IIO_BUFFER 28 select IIO_TRIGGERED_BUFFER 29 help 30 Say yes here to build support for Asahi Kasei AK8975, AK8963, 31 AK09911, AK09912 or AK09916 3-Axis Magnetometer. 32 33 To compile this driver as a module, choose M here: the module 34 will be called ak8975. 35 36config AK09911 37 tristate "Asahi Kasei AK09911 3-axis Compass" 38 depends on I2C 39 depends on GPIOLIB || COMPILE_TEST 40 select AK8975 41 help 42 Deprecated: AK09911 is now supported by AK8975 driver. 43 44config BMC150_MAGN 45 tristate 46 select IIO_BUFFER 47 select IIO_TRIGGERED_BUFFER 48 49config BMC150_MAGN_I2C 50 tristate "Bosch BMC150 I2C Magnetometer Driver" 51 depends on I2C 52 select BMC150_MAGN 53 select REGMAP_I2C 54 help 55 Say yes here to build support for the BMC150 magnetometer with 56 I2C interface. 57 58 This is a combo module with both accelerometer and magnetometer. 59 This driver is only implementing magnetometer part, which has 60 its own address and register map. 61 62 This driver also supports I2C Bosch BMC156 and BMM150 chips. 63 To compile this driver as a module, choose M here: the module will be 64 called bmc150_magn_i2c. 65 66config BMC150_MAGN_SPI 67 tristate "Bosch BMC150 SPI Magnetometer Driver" 68 depends on SPI 69 select BMC150_MAGN 70 select REGMAP_SPI 71 help 72 Say yes here to build support for the BMC150 magnetometer with 73 SPI interface. 74 75 This is a combo module with both accelerometer and magnetometer. 76 This driver is only implementing magnetometer part, which has 77 its own address and register map. 78 79 This driver also supports SPI Bosch BMC156 and BMM150 chips. 80 To compile this driver as a module, choose M here: the module will be 81 called bmc150_magn_spi. 82 83config MAG3110 84 tristate "Freescale MAG3110 3-Axis Magnetometer" 85 depends on I2C 86 select IIO_BUFFER 87 select IIO_TRIGGERED_BUFFER 88 help 89 Say yes here to build support for the Freescale MAG3110 3-Axis 90 magnetometer. 91 92 To compile this driver as a module, choose M here: the module 93 will be called mag3110. 94 95config HID_SENSOR_MAGNETOMETER_3D 96 depends on HID_SENSOR_HUB 97 select IIO_BUFFER 98 select HID_SENSOR_IIO_COMMON 99 select HID_SENSOR_IIO_TRIGGER 100 tristate "HID Magenetometer 3D" 101 help 102 Say yes here to build support for the HID SENSOR 103 Magnetometer 3D. 104 105config MMC35240 106 tristate "MEMSIC MMC35240 3-axis magnetic sensor" 107 select REGMAP_I2C 108 depends on I2C 109 help 110 Say yes here to build support for the MEMSIC MMC35240 3-axis 111 magnetic sensor. 112 113 To compile this driver as a module, choose M here: the module 114 will be called mmc35240. 115 116config IIO_ST_MAGN_3AXIS 117 tristate "STMicroelectronics magnetometers 3-Axis Driver" 118 depends on (I2C || SPI_MASTER) && SYSFS 119 select IIO_ST_SENSORS_CORE 120 select IIO_ST_MAGN_I2C_3AXIS if (I2C) 121 select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER) 122 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 123 help 124 Say yes here to build support for STMicroelectronics magnetometers: 125 LSM303DLHC, LSM303DLM, LIS3MDL. 126 127 This driver can also be built as a module. If so, these modules 128 will be created: 129 - st_magn (core functions for the driver [it is mandatory]); 130 - st_magn_i2c (necessary for the I2C devices [optional*]); 131 - st_magn_spi (necessary for the SPI devices [optional*]); 132 133 (*) one of these is necessary to do something. 134 135config IIO_ST_MAGN_I2C_3AXIS 136 tristate 137 depends on IIO_ST_MAGN_3AXIS 138 depends on IIO_ST_SENSORS_I2C 139 140config IIO_ST_MAGN_SPI_3AXIS 141 tristate 142 depends on IIO_ST_MAGN_3AXIS 143 depends on IIO_ST_SENSORS_SPI 144 145config SENSORS_HMC5843 146 tristate 147 select IIO_BUFFER 148 select IIO_TRIGGERED_BUFFER 149 150config SENSORS_HMC5843_I2C 151 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" 152 depends on I2C 153 select SENSORS_HMC5843 154 select REGMAP_I2C 155 help 156 Say Y here to add support for the Honeywell HMC5843, HMC5883 and 157 HMC5883L 3-Axis Magnetometer (digital compass). 158 159 This driver can also be compiled as a set of modules. 160 If so, these modules will be created: 161 - hmc5843_core (core functions) 162 - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) 163 164config SENSORS_HMC5843_SPI 165 tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" 166 depends on SPI_MASTER 167 select SENSORS_HMC5843 168 select REGMAP_SPI 169 help 170 Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer 171 (digital compass). 172 173 This driver can also be compiled as a set of modules. 174 If so, these modules will be created: 175 - hmc5843_core (core functions) 176 - hmc5843_spi (support for HMC5983) 177 178config SENSORS_RM3100 179 tristate 180 select IIO_BUFFER 181 select IIO_TRIGGERED_BUFFER 182 183config SENSORS_RM3100_I2C 184 tristate "PNI RM3100 3-Axis Magnetometer (I2C)" 185 depends on I2C 186 select SENSORS_RM3100 187 select REGMAP_I2C 188 help 189 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 190 191 This driver can also be compiled as a module. 192 To compile this driver as a module, choose M here: the module 193 will be called rm3100-i2c. 194 195config SENSORS_RM3100_SPI 196 tristate "PNI RM3100 3-Axis Magnetometer (SPI)" 197 depends on SPI_MASTER 198 select SENSORS_RM3100 199 select REGMAP_SPI 200 help 201 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 202 203 This driver can also be compiled as a module. 204 To compile this driver as a module, choose M here: the module 205 will be called rm3100-spi. 206 207config YAMAHA_YAS530 208 tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" 209 depends on I2C 210 select REGMAP_I2C 211 select IIO_BUFFER 212 select IIO_TRIGGERED_BUFFER 213 help 214 Say Y here to add support for the Yamaha YAS530 series of 215 3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are 216 fully supported. 217 218 This driver can also be compiled as a module. 219 To compile this driver as a module, choose M here: the module 220 will be called yamaha-yas. 221 222endmenu 223