1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Magnetometer sensors 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Magnetometer sensors" 8 9config AK8974 10 tristate "Asahi Kasei AK8974 3-Axis Magnetometer" 11 depends on I2C 12 depends on OF 13 select REGMAP_I2C 14 select IIO_BUFFER 15 select IIO_TRIGGERED_BUFFER 16 help 17 Say yes here to build support for Asahi Kasei AK8974, AMI305 or 18 AMI306 I2C-based 3-axis magnetometer chips. 19 20 To compile this driver as a module, choose M here: the module 21 will be called ak8974. 22 23config AK8975 24 tristate "Asahi Kasei AK8975 3-Axis Magnetometer" 25 depends on I2C 26 depends on GPIOLIB || COMPILE_TEST 27 select IIO_BUFFER 28 select IIO_TRIGGERED_BUFFER 29 help 30 Say yes here to build support for Asahi Kasei AK8975, AK8963, 31 AK09911, AK09912 or AK09916 3-Axis Magnetometer. 32 33 To compile this driver as a module, choose M here: the module 34 will be called ak8975. 35 36config AK09911 37 tristate "Asahi Kasei AK09911 3-axis Compass" 38 depends on I2C 39 depends on GPIOLIB || COMPILE_TEST 40 select AK8975 41 help 42 Deprecated: AK09911 is now supported by AK8975 driver. 43 44config BMC150_MAGN 45 tristate 46 select IIO_BUFFER 47 select IIO_TRIGGERED_BUFFER 48 49config BMC150_MAGN_I2C 50 tristate "Bosch BMC150 I2C Magnetometer Driver" 51 depends on I2C 52 select BMC150_MAGN 53 select REGMAP_I2C 54 help 55 Say yes here to build support for the BMC150 magnetometer with 56 I2C interface. 57 58 This is a combo module with both accelerometer and magnetometer. 59 This driver is only implementing magnetometer part, which has 60 its own address and register map. 61 62 This driver also supports I2C Bosch BMC156 and BMM150 chips. 63 To compile this driver as a module, choose M here: the module will be 64 called bmc150_magn_i2c. 65 66config BMC150_MAGN_SPI 67 tristate "Bosch BMC150 SPI Magnetometer Driver" 68 depends on SPI 69 select BMC150_MAGN 70 select REGMAP_SPI 71 help 72 Say yes here to build support for the BMC150 magnetometer with 73 SPI interface. 74 75 This is a combo module with both accelerometer and magnetometer. 76 This driver is only implementing magnetometer part, which has 77 its own address and register map. 78 79 This driver also supports SPI Bosch BMC156 and BMM150 chips. 80 To compile this driver as a module, choose M here: the module will be 81 called bmc150_magn_spi. 82 83config MAG3110 84 tristate "Freescale MAG3110 3-Axis Magnetometer" 85 depends on I2C 86 select IIO_BUFFER 87 select IIO_TRIGGERED_BUFFER 88 help 89 Say yes here to build support for the Freescale MAG3110 3-Axis 90 magnetometer. 91 92 To compile this driver as a module, choose M here: the module 93 will be called mag3110. 94 95config HID_SENSOR_MAGNETOMETER_3D 96 depends on HID_SENSOR_HUB 97 select IIO_BUFFER 98 select HID_SENSOR_IIO_COMMON 99 select HID_SENSOR_IIO_TRIGGER 100 tristate "HID Magenetometer 3D" 101 help 102 Say yes here to build support for the HID SENSOR 103 Magnetometer 3D. 104 105config MMC35240 106 tristate "MEMSIC MMC35240 3-axis magnetic sensor" 107 select REGMAP_I2C 108 depends on I2C 109 help 110 Say yes here to build support for the MEMSIC MMC35240 3-axis 111 magnetic sensor. 112 113 To compile this driver as a module, choose M here: the module 114 will be called mmc35240. 115 116config IIO_ST_MAGN_3AXIS 117 tristate "STMicroelectronics magnetometers 3-Axis Driver" 118 depends on (I2C || SPI_MASTER) && SYSFS 119 select IIO_ST_SENSORS_CORE 120 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 121 help 122 Say yes here to build support for STMicroelectronics magnetometers: 123 LSM303DLHC, LSM303DLM, LIS3MDL. 124 125 Also need to enable at least one of I2C and SPI interface drivers 126 below. 127 128config IIO_ST_MAGN_I2C_3AXIS 129 tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" 130 depends on I2C && IIO_ST_MAGN_3AXIS 131 default I2C && IIO_ST_MAGN_3AXIS 132 select IIO_ST_SENSORS_I2C 133 help 134 Build support for STMicroelectronics magnetometers I2C interface. 135 136 To compile this driver as a module, choose M here. The module 137 will be called st_magn_i2c. 138 139config IIO_ST_MAGN_SPI_3AXIS 140 tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" 141 depends on SPI_MASTER && IIO_ST_MAGN_3AXIS 142 default SPI_MASTER && IIO_ST_MAGN_3AXIS 143 select IIO_ST_SENSORS_SPI 144 help 145 Build support for STMicroelectronics magnetometers SPI interface. 146 147 To compile this driver as a module, choose M here. The module 148 will be called st_magn_spi. 149 150config SENSORS_HMC5843 151 tristate 152 select IIO_BUFFER 153 select IIO_TRIGGERED_BUFFER 154 155config SENSORS_HMC5843_I2C 156 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" 157 depends on I2C 158 select SENSORS_HMC5843 159 select REGMAP_I2C 160 help 161 Say Y here to add support for the Honeywell HMC5843, HMC5883 and 162 HMC5883L 3-Axis Magnetometer (digital compass). 163 164 This driver can also be compiled as a set of modules. 165 If so, these modules will be created: 166 - hmc5843_core (core functions) 167 - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) 168 169config SENSORS_HMC5843_SPI 170 tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" 171 depends on SPI_MASTER 172 select SENSORS_HMC5843 173 select REGMAP_SPI 174 help 175 Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer 176 (digital compass). 177 178 This driver can also be compiled as a set of modules. 179 If so, these modules will be created: 180 - hmc5843_core (core functions) 181 - hmc5843_spi (support for HMC5983) 182 183config SENSORS_RM3100 184 tristate 185 select IIO_BUFFER 186 select IIO_TRIGGERED_BUFFER 187 188config SENSORS_RM3100_I2C 189 tristate "PNI RM3100 3-Axis Magnetometer (I2C)" 190 depends on I2C 191 select SENSORS_RM3100 192 select REGMAP_I2C 193 help 194 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 195 196 This driver can also be compiled as a module. 197 To compile this driver as a module, choose M here: the module 198 will be called rm3100-i2c. 199 200config SENSORS_RM3100_SPI 201 tristate "PNI RM3100 3-Axis Magnetometer (SPI)" 202 depends on SPI_MASTER 203 select SENSORS_RM3100 204 select REGMAP_SPI 205 help 206 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 207 208 This driver can also be compiled as a module. 209 To compile this driver as a module, choose M here: the module 210 will be called rm3100-spi. 211 212config YAMAHA_YAS530 213 tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" 214 depends on I2C 215 select REGMAP_I2C 216 select IIO_BUFFER 217 select IIO_TRIGGERED_BUFFER 218 help 219 Say Y here to add support for the Yamaha YAS530 series of 220 3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are 221 fully supported. 222 223 This driver can also be compiled as a module. 224 To compile this driver as a module, choose M here: the module 225 will be called yamaha-yas. 226 227endmenu 228