1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Magnetometer sensors 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Magnetometer sensors" 8 9config AK8974 10 tristate "Asahi Kasei AK8974 3-Axis Magnetometer" 11 depends on I2C 12 select REGMAP_I2C 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 help 16 Say yes here to build support for Asahi Kasei AK8974, AMI305 or 17 AMI306 I2C-based 3-axis magnetometer chips. 18 19 To compile this driver as a module, choose M here: the module 20 will be called ak8974. 21 22config AK8975 23 tristate "Asahi Kasei AK8975 3-Axis Magnetometer" 24 depends on I2C 25 depends on GPIOLIB || COMPILE_TEST 26 select IIO_BUFFER 27 select IIO_TRIGGERED_BUFFER 28 help 29 Say yes here to build support for Asahi Kasei AK8975, AK8963, 30 AK09911, AK09912 or AK09916 3-Axis Magnetometer. 31 32 To compile this driver as a module, choose M here: the module 33 will be called ak8975. 34 35config AK09911 36 tristate "Asahi Kasei AK09911 3-axis Compass" 37 depends on I2C 38 depends on GPIOLIB || COMPILE_TEST 39 select AK8975 40 help 41 Deprecated: AK09911 is now supported by AK8975 driver. 42 43config BMC150_MAGN 44 tristate 45 select IIO_BUFFER 46 select IIO_TRIGGERED_BUFFER 47 48config BMC150_MAGN_I2C 49 tristate "Bosch BMC150 I2C Magnetometer Driver" 50 depends on I2C 51 select BMC150_MAGN 52 select REGMAP_I2C 53 help 54 Say yes here to build support for the BMC150 magnetometer with 55 I2C interface. 56 57 This is a combo module with both accelerometer and magnetometer. 58 This driver is only implementing magnetometer part, which has 59 its own address and register map. 60 61 This driver also supports I2C Bosch BMC156 and BMM150 chips. 62 To compile this driver as a module, choose M here: the module will be 63 called bmc150_magn_i2c. 64 65config BMC150_MAGN_SPI 66 tristate "Bosch BMC150 SPI Magnetometer Driver" 67 depends on SPI 68 select BMC150_MAGN 69 select REGMAP_SPI 70 help 71 Say yes here to build support for the BMC150 magnetometer with 72 SPI interface. 73 74 This is a combo module with both accelerometer and magnetometer. 75 This driver is only implementing magnetometer part, which has 76 its own address and register map. 77 78 This driver also supports SPI Bosch BMC156 and BMM150 chips. 79 To compile this driver as a module, choose M here: the module will be 80 called bmc150_magn_spi. 81 82config MAG3110 83 tristate "Freescale MAG3110 3-Axis Magnetometer" 84 depends on I2C 85 select IIO_BUFFER 86 select IIO_TRIGGERED_BUFFER 87 help 88 Say yes here to build support for the Freescale MAG3110 3-Axis 89 magnetometer. 90 91 To compile this driver as a module, choose M here: the module 92 will be called mag3110. 93 94config HID_SENSOR_MAGNETOMETER_3D 95 depends on HID_SENSOR_HUB 96 select IIO_BUFFER 97 select HID_SENSOR_IIO_COMMON 98 select HID_SENSOR_IIO_TRIGGER 99 tristate "HID Magenetometer 3D" 100 help 101 Say yes here to build support for the HID SENSOR 102 Magnetometer 3D. 103 104config MMC35240 105 tristate "MEMSIC MMC35240 3-axis magnetic sensor" 106 select REGMAP_I2C 107 depends on I2C 108 help 109 Say yes here to build support for the MEMSIC MMC35240 3-axis 110 magnetic sensor. 111 112 To compile this driver as a module, choose M here: the module 113 will be called mmc35240. 114 115config IIO_ST_MAGN_3AXIS 116 tristate "STMicroelectronics magnetometers 3-Axis Driver" 117 depends on (I2C || SPI_MASTER) && SYSFS 118 select IIO_ST_SENSORS_CORE 119 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) 120 help 121 Say yes here to build support for STMicroelectronics magnetometers: 122 LSM303DLHC, LSM303DLM, LIS3MDL. 123 124 Also need to enable at least one of I2C and SPI interface drivers 125 below. 126 127config IIO_ST_MAGN_I2C_3AXIS 128 tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" 129 depends on I2C && IIO_ST_MAGN_3AXIS 130 default I2C && IIO_ST_MAGN_3AXIS 131 select IIO_ST_SENSORS_I2C 132 help 133 Build support for STMicroelectronics magnetometers I2C interface. 134 135 To compile this driver as a module, choose M here. The module 136 will be called st_magn_i2c. 137 138config IIO_ST_MAGN_SPI_3AXIS 139 tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" 140 depends on SPI_MASTER && IIO_ST_MAGN_3AXIS 141 default SPI_MASTER && IIO_ST_MAGN_3AXIS 142 select IIO_ST_SENSORS_SPI 143 help 144 Build support for STMicroelectronics magnetometers SPI interface. 145 146 To compile this driver as a module, choose M here. The module 147 will be called st_magn_spi. 148 149config SENSORS_HMC5843 150 tristate 151 select IIO_BUFFER 152 select IIO_TRIGGERED_BUFFER 153 154config SENSORS_HMC5843_I2C 155 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" 156 depends on I2C 157 select SENSORS_HMC5843 158 select REGMAP_I2C 159 help 160 Say Y here to add support for the Honeywell HMC5843, HMC5883 and 161 HMC5883L 3-Axis Magnetometer (digital compass). 162 163 This driver can also be compiled as a set of modules. 164 If so, these modules will be created: 165 - hmc5843_core (core functions) 166 - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) 167 168config SENSORS_HMC5843_SPI 169 tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" 170 depends on SPI_MASTER 171 select SENSORS_HMC5843 172 select REGMAP_SPI 173 help 174 Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer 175 (digital compass). 176 177 This driver can also be compiled as a set of modules. 178 If so, these modules will be created: 179 - hmc5843_core (core functions) 180 - hmc5843_spi (support for HMC5983) 181 182config SENSORS_RM3100 183 tristate 184 select IIO_BUFFER 185 select IIO_TRIGGERED_BUFFER 186 187config SENSORS_RM3100_I2C 188 tristate "PNI RM3100 3-Axis Magnetometer (I2C)" 189 depends on I2C 190 select SENSORS_RM3100 191 select REGMAP_I2C 192 help 193 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 194 195 This driver can also be compiled as a module. 196 To compile this driver as a module, choose M here: the module 197 will be called rm3100-i2c. 198 199config SENSORS_RM3100_SPI 200 tristate "PNI RM3100 3-Axis Magnetometer (SPI)" 201 depends on SPI_MASTER 202 select SENSORS_RM3100 203 select REGMAP_SPI 204 help 205 Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. 206 207 This driver can also be compiled as a module. 208 To compile this driver as a module, choose M here: the module 209 will be called rm3100-spi. 210 211config YAMAHA_YAS530 212 tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" 213 depends on I2C 214 select REGMAP_I2C 215 select IIO_BUFFER 216 select IIO_TRIGGERED_BUFFER 217 help 218 Say Y here to add support for the Yamaha YAS530 series of 219 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are 220 supported. 221 222 This driver can also be compiled as a module. 223 To compile this driver as a module, choose M here: the module 224 will be called yamaha-yas. 225 226endmenu 227