1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * vl6180.c - Support for STMicroelectronics VL6180 ALS, range and proximity 4 * sensor 5 * 6 * Copyright 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net> 7 * Copyright 2017 Manivannan Sadhasivam <manivannanece23@gmail.com> 8 * 9 * IIO driver for VL6180 (7-bit I2C slave address 0x29) 10 * 11 * Range: 0 to 100mm 12 * ALS: < 1 Lux up to 100 kLux 13 * IR: 850nm 14 * 15 * TODO: irq, threshold events, continuous mode, hardware buffer 16 */ 17 18 #include <linux/module.h> 19 #include <linux/i2c.h> 20 #include <linux/mutex.h> 21 #include <linux/err.h> 22 #include <linux/of.h> 23 #include <linux/delay.h> 24 #include <linux/util_macros.h> 25 26 #include <linux/iio/iio.h> 27 #include <linux/iio/sysfs.h> 28 29 #define VL6180_DRV_NAME "vl6180" 30 31 /* Device identification register and value */ 32 #define VL6180_MODEL_ID 0x000 33 #define VL6180_MODEL_ID_VAL 0xb4 34 35 /* Configuration registers */ 36 #define VL6180_INTR_CONFIG 0x014 37 #define VL6180_INTR_CLEAR 0x015 38 #define VL6180_OUT_OF_RESET 0x016 39 #define VL6180_HOLD 0x017 40 #define VL6180_RANGE_START 0x018 41 #define VL6180_ALS_START 0x038 42 #define VL6180_ALS_GAIN 0x03f 43 #define VL6180_ALS_IT 0x040 44 45 /* Status registers */ 46 #define VL6180_RANGE_STATUS 0x04d 47 #define VL6180_ALS_STATUS 0x04e 48 #define VL6180_INTR_STATUS 0x04f 49 50 /* Result value registers */ 51 #define VL6180_ALS_VALUE 0x050 52 #define VL6180_RANGE_VALUE 0x062 53 #define VL6180_RANGE_RATE 0x066 54 55 /* bits of the RANGE_START and ALS_START register */ 56 #define VL6180_MODE_CONT BIT(1) /* continuous mode */ 57 #define VL6180_STARTSTOP BIT(0) /* start measurement, auto-reset */ 58 59 /* bits of the INTR_STATUS and INTR_CONFIG register */ 60 #define VL6180_ALS_READY BIT(5) 61 #define VL6180_RANGE_READY BIT(2) 62 63 /* bits of the INTR_CLEAR register */ 64 #define VL6180_CLEAR_ERROR BIT(2) 65 #define VL6180_CLEAR_ALS BIT(1) 66 #define VL6180_CLEAR_RANGE BIT(0) 67 68 /* bits of the HOLD register */ 69 #define VL6180_HOLD_ON BIT(0) 70 71 /* default value for the ALS_IT register */ 72 #define VL6180_ALS_IT_100 0x63 /* 100 ms */ 73 74 /* values for the ALS_GAIN register */ 75 #define VL6180_ALS_GAIN_1 0x46 76 #define VL6180_ALS_GAIN_1_25 0x45 77 #define VL6180_ALS_GAIN_1_67 0x44 78 #define VL6180_ALS_GAIN_2_5 0x43 79 #define VL6180_ALS_GAIN_5 0x42 80 #define VL6180_ALS_GAIN_10 0x41 81 #define VL6180_ALS_GAIN_20 0x40 82 #define VL6180_ALS_GAIN_40 0x47 83 84 struct vl6180_data { 85 struct i2c_client *client; 86 struct mutex lock; 87 unsigned int als_gain_milli; 88 unsigned int als_it_ms; 89 }; 90 91 enum { VL6180_ALS, VL6180_RANGE, VL6180_PROX }; 92 93 /** 94 * struct vl6180_chan_regs - Registers for accessing channels 95 * @drdy_mask: Data ready bit in status register 96 * @start_reg: Conversion start register 97 * @value_reg: Result value register 98 * @word: Register word length 99 */ 100 struct vl6180_chan_regs { 101 u8 drdy_mask; 102 u16 start_reg, value_reg; 103 bool word; 104 }; 105 106 static const struct vl6180_chan_regs vl6180_chan_regs_table[] = { 107 [VL6180_ALS] = { 108 .drdy_mask = VL6180_ALS_READY, 109 .start_reg = VL6180_ALS_START, 110 .value_reg = VL6180_ALS_VALUE, 111 .word = true, 112 }, 113 [VL6180_RANGE] = { 114 .drdy_mask = VL6180_RANGE_READY, 115 .start_reg = VL6180_RANGE_START, 116 .value_reg = VL6180_RANGE_VALUE, 117 .word = false, 118 }, 119 [VL6180_PROX] = { 120 .drdy_mask = VL6180_RANGE_READY, 121 .start_reg = VL6180_RANGE_START, 122 .value_reg = VL6180_RANGE_RATE, 123 .word = true, 124 }, 125 }; 126 127 static int vl6180_read(struct i2c_client *client, u16 cmd, void *databuf, 128 u8 len) 129 { 130 __be16 cmdbuf = cpu_to_be16(cmd); 131 struct i2c_msg msgs[2] = { 132 { .addr = client->addr, .len = sizeof(cmdbuf), .buf = (u8 *) &cmdbuf }, 133 { .addr = client->addr, .len = len, .buf = databuf, 134 .flags = I2C_M_RD } }; 135 int ret; 136 137 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 138 if (ret < 0) 139 dev_err(&client->dev, "failed reading register 0x%04x\n", cmd); 140 141 return ret; 142 } 143 144 static int vl6180_read_byte(struct i2c_client *client, u16 cmd) 145 { 146 u8 data; 147 int ret; 148 149 ret = vl6180_read(client, cmd, &data, sizeof(data)); 150 if (ret < 0) 151 return ret; 152 153 return data; 154 } 155 156 static int vl6180_read_word(struct i2c_client *client, u16 cmd) 157 { 158 __be16 data; 159 int ret; 160 161 ret = vl6180_read(client, cmd, &data, sizeof(data)); 162 if (ret < 0) 163 return ret; 164 165 return be16_to_cpu(data); 166 } 167 168 static int vl6180_write_byte(struct i2c_client *client, u16 cmd, u8 val) 169 { 170 u8 buf[3]; 171 struct i2c_msg msgs[1] = { 172 { .addr = client->addr, .len = sizeof(buf), .buf = (u8 *) &buf } }; 173 int ret; 174 175 buf[0] = cmd >> 8; 176 buf[1] = cmd & 0xff; 177 buf[2] = val; 178 179 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 180 if (ret < 0) { 181 dev_err(&client->dev, "failed writing register 0x%04x\n", cmd); 182 return ret; 183 } 184 185 return 0; 186 } 187 188 static int vl6180_write_word(struct i2c_client *client, u16 cmd, u16 val) 189 { 190 __be16 buf[2]; 191 struct i2c_msg msgs[1] = { 192 { .addr = client->addr, .len = sizeof(buf), .buf = (u8 *) &buf } }; 193 int ret; 194 195 buf[0] = cpu_to_be16(cmd); 196 buf[1] = cpu_to_be16(val); 197 198 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 199 if (ret < 0) { 200 dev_err(&client->dev, "failed writing register 0x%04x\n", cmd); 201 return ret; 202 } 203 204 return 0; 205 } 206 207 static int vl6180_measure(struct vl6180_data *data, int addr) 208 { 209 struct i2c_client *client = data->client; 210 int tries = 20, ret; 211 u16 value; 212 213 mutex_lock(&data->lock); 214 /* Start single shot measurement */ 215 ret = vl6180_write_byte(client, 216 vl6180_chan_regs_table[addr].start_reg, VL6180_STARTSTOP); 217 if (ret < 0) 218 goto fail; 219 220 while (tries--) { 221 ret = vl6180_read_byte(client, VL6180_INTR_STATUS); 222 if (ret < 0) 223 goto fail; 224 225 if (ret & vl6180_chan_regs_table[addr].drdy_mask) 226 break; 227 msleep(20); 228 } 229 230 if (tries < 0) { 231 ret = -EIO; 232 goto fail; 233 } 234 235 /* Read result value from appropriate registers */ 236 ret = vl6180_chan_regs_table[addr].word ? 237 vl6180_read_word(client, vl6180_chan_regs_table[addr].value_reg) : 238 vl6180_read_byte(client, vl6180_chan_regs_table[addr].value_reg); 239 if (ret < 0) 240 goto fail; 241 value = ret; 242 243 /* Clear the interrupt flag after data read */ 244 ret = vl6180_write_byte(client, VL6180_INTR_CLEAR, 245 VL6180_CLEAR_ERROR | VL6180_CLEAR_ALS | VL6180_CLEAR_RANGE); 246 if (ret < 0) 247 goto fail; 248 249 ret = value; 250 251 fail: 252 mutex_unlock(&data->lock); 253 254 return ret; 255 } 256 257 static const struct iio_chan_spec vl6180_channels[] = { 258 { 259 .type = IIO_LIGHT, 260 .address = VL6180_ALS, 261 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 262 BIT(IIO_CHAN_INFO_INT_TIME) | 263 BIT(IIO_CHAN_INFO_SCALE) | 264 BIT(IIO_CHAN_INFO_HARDWAREGAIN), 265 }, { 266 .type = IIO_DISTANCE, 267 .address = VL6180_RANGE, 268 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 269 BIT(IIO_CHAN_INFO_SCALE), 270 }, { 271 .type = IIO_PROXIMITY, 272 .address = VL6180_PROX, 273 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 274 } 275 }; 276 277 /* 278 * Available Ambient Light Sensor gain settings, 1/1000th, and 279 * corresponding setting for the VL6180_ALS_GAIN register 280 */ 281 static const int vl6180_als_gain_tab[8] = { 282 1000, 1250, 1670, 2500, 5000, 10000, 20000, 40000 283 }; 284 static const u8 vl6180_als_gain_tab_bits[8] = { 285 VL6180_ALS_GAIN_1, VL6180_ALS_GAIN_1_25, 286 VL6180_ALS_GAIN_1_67, VL6180_ALS_GAIN_2_5, 287 VL6180_ALS_GAIN_5, VL6180_ALS_GAIN_10, 288 VL6180_ALS_GAIN_20, VL6180_ALS_GAIN_40 289 }; 290 291 static int vl6180_read_raw(struct iio_dev *indio_dev, 292 struct iio_chan_spec const *chan, 293 int *val, int *val2, long mask) 294 { 295 struct vl6180_data *data = iio_priv(indio_dev); 296 int ret; 297 298 switch (mask) { 299 case IIO_CHAN_INFO_RAW: 300 ret = vl6180_measure(data, chan->address); 301 if (ret < 0) 302 return ret; 303 *val = ret; 304 305 return IIO_VAL_INT; 306 case IIO_CHAN_INFO_INT_TIME: 307 *val = data->als_it_ms; 308 *val2 = 1000; 309 310 return IIO_VAL_FRACTIONAL; 311 312 case IIO_CHAN_INFO_SCALE: 313 switch (chan->type) { 314 case IIO_LIGHT: 315 /* one ALS count is 0.32 Lux @ gain 1, IT 100 ms */ 316 *val = 32000; /* 0.32 * 1000 * 100 */ 317 *val2 = data->als_gain_milli * data->als_it_ms; 318 319 return IIO_VAL_FRACTIONAL; 320 321 case IIO_DISTANCE: 322 *val = 0; /* sensor reports mm, scale to meter */ 323 *val2 = 1000; 324 break; 325 default: 326 return -EINVAL; 327 } 328 329 return IIO_VAL_INT_PLUS_MICRO; 330 case IIO_CHAN_INFO_HARDWAREGAIN: 331 *val = data->als_gain_milli; 332 *val2 = 1000; 333 334 return IIO_VAL_FRACTIONAL; 335 336 default: 337 return -EINVAL; 338 } 339 } 340 341 static IIO_CONST_ATTR(als_gain_available, "1 1.25 1.67 2.5 5 10 20 40"); 342 343 static struct attribute *vl6180_attributes[] = { 344 &iio_const_attr_als_gain_available.dev_attr.attr, 345 NULL 346 }; 347 348 static const struct attribute_group vl6180_attribute_group = { 349 .attrs = vl6180_attributes, 350 }; 351 352 /* HOLD is needed before updating any config registers */ 353 static int vl6180_hold(struct vl6180_data *data, bool hold) 354 { 355 return vl6180_write_byte(data->client, VL6180_HOLD, 356 hold ? VL6180_HOLD_ON : 0); 357 } 358 359 static int vl6180_set_als_gain(struct vl6180_data *data, int val, int val2) 360 { 361 int i, ret, gain; 362 363 if (val < 1 || val > 40) 364 return -EINVAL; 365 366 gain = (val * 1000000 + val2) / 1000; 367 if (gain < 1 || gain > 40000) 368 return -EINVAL; 369 370 i = find_closest(gain, vl6180_als_gain_tab, 371 ARRAY_SIZE(vl6180_als_gain_tab)); 372 373 mutex_lock(&data->lock); 374 ret = vl6180_hold(data, true); 375 if (ret < 0) 376 goto fail; 377 378 ret = vl6180_write_byte(data->client, VL6180_ALS_GAIN, 379 vl6180_als_gain_tab_bits[i]); 380 381 if (ret >= 0) 382 data->als_gain_milli = vl6180_als_gain_tab[i]; 383 384 fail: 385 vl6180_hold(data, false); 386 mutex_unlock(&data->lock); 387 return ret; 388 } 389 390 static int vl6180_set_it(struct vl6180_data *data, int val, int val2) 391 { 392 int ret, it_ms; 393 394 it_ms = (val2 + 500) / 1000; /* round to ms */ 395 if (val != 0 || it_ms < 1 || it_ms > 512) 396 return -EINVAL; 397 398 mutex_lock(&data->lock); 399 ret = vl6180_hold(data, true); 400 if (ret < 0) 401 goto fail; 402 403 ret = vl6180_write_word(data->client, VL6180_ALS_IT, it_ms - 1); 404 405 if (ret >= 0) 406 data->als_it_ms = it_ms; 407 408 fail: 409 vl6180_hold(data, false); 410 mutex_unlock(&data->lock); 411 412 return ret; 413 } 414 415 static int vl6180_write_raw(struct iio_dev *indio_dev, 416 struct iio_chan_spec const *chan, 417 int val, int val2, long mask) 418 { 419 struct vl6180_data *data = iio_priv(indio_dev); 420 421 switch (mask) { 422 case IIO_CHAN_INFO_INT_TIME: 423 return vl6180_set_it(data, val, val2); 424 425 case IIO_CHAN_INFO_HARDWAREGAIN: 426 if (chan->type != IIO_LIGHT) 427 return -EINVAL; 428 429 return vl6180_set_als_gain(data, val, val2); 430 default: 431 return -EINVAL; 432 } 433 } 434 435 static const struct iio_info vl6180_info = { 436 .read_raw = vl6180_read_raw, 437 .write_raw = vl6180_write_raw, 438 .attrs = &vl6180_attribute_group, 439 }; 440 441 static int vl6180_init(struct vl6180_data *data) 442 { 443 struct i2c_client *client = data->client; 444 int ret; 445 446 ret = vl6180_read_byte(client, VL6180_MODEL_ID); 447 if (ret < 0) 448 return ret; 449 450 if (ret != VL6180_MODEL_ID_VAL) { 451 dev_err(&client->dev, "invalid model ID %02x\n", ret); 452 return -ENODEV; 453 } 454 455 ret = vl6180_hold(data, true); 456 if (ret < 0) 457 return ret; 458 459 ret = vl6180_read_byte(client, VL6180_OUT_OF_RESET); 460 if (ret < 0) 461 return ret; 462 463 /* 464 * Detect false reset condition here. This bit is always set when the 465 * system comes out of reset. 466 */ 467 if (ret != 0x01) 468 dev_info(&client->dev, "device is not fresh out of reset\n"); 469 470 /* Enable ALS and Range ready interrupts */ 471 ret = vl6180_write_byte(client, VL6180_INTR_CONFIG, 472 VL6180_ALS_READY | VL6180_RANGE_READY); 473 if (ret < 0) 474 return ret; 475 476 /* ALS integration time: 100ms */ 477 data->als_it_ms = 100; 478 ret = vl6180_write_word(client, VL6180_ALS_IT, VL6180_ALS_IT_100); 479 if (ret < 0) 480 return ret; 481 482 /* ALS gain: 1 */ 483 data->als_gain_milli = 1000; 484 ret = vl6180_write_byte(client, VL6180_ALS_GAIN, VL6180_ALS_GAIN_1); 485 if (ret < 0) 486 return ret; 487 488 ret = vl6180_write_byte(client, VL6180_OUT_OF_RESET, 0x00); 489 if (ret < 0) 490 return ret; 491 492 return vl6180_hold(data, false); 493 } 494 495 static int vl6180_probe(struct i2c_client *client, 496 const struct i2c_device_id *id) 497 { 498 struct vl6180_data *data; 499 struct iio_dev *indio_dev; 500 int ret; 501 502 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); 503 if (!indio_dev) 504 return -ENOMEM; 505 506 data = iio_priv(indio_dev); 507 i2c_set_clientdata(client, indio_dev); 508 data->client = client; 509 mutex_init(&data->lock); 510 511 indio_dev->dev.parent = &client->dev; 512 indio_dev->info = &vl6180_info; 513 indio_dev->channels = vl6180_channels; 514 indio_dev->num_channels = ARRAY_SIZE(vl6180_channels); 515 indio_dev->name = VL6180_DRV_NAME; 516 indio_dev->modes = INDIO_DIRECT_MODE; 517 518 ret = vl6180_init(data); 519 if (ret < 0) 520 return ret; 521 522 return devm_iio_device_register(&client->dev, indio_dev); 523 } 524 525 static const struct of_device_id vl6180_of_match[] = { 526 { .compatible = "st,vl6180", }, 527 { }, 528 }; 529 MODULE_DEVICE_TABLE(of, vl6180_of_match); 530 531 static const struct i2c_device_id vl6180_id[] = { 532 { "vl6180", 0 }, 533 { } 534 }; 535 MODULE_DEVICE_TABLE(i2c, vl6180_id); 536 537 static struct i2c_driver vl6180_driver = { 538 .driver = { 539 .name = VL6180_DRV_NAME, 540 .of_match_table = of_match_ptr(vl6180_of_match), 541 }, 542 .probe = vl6180_probe, 543 .id_table = vl6180_id, 544 }; 545 546 module_i2c_driver(vl6180_driver); 547 548 MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>"); 549 MODULE_AUTHOR("Manivannan Sadhasivam <manivannanece23@gmail.com>"); 550 MODULE_DESCRIPTION("STMicro VL6180 ALS, range and proximity sensor driver"); 551 MODULE_LICENSE("GPL"); 552