xref: /openbmc/linux/drivers/iio/light/vcnl4000.c (revision 9bd5910d)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * vcnl4000.c - Support for Vishay VCNL4000/4010/4020/4040/4200 combined ambient
4  * light and proximity sensor
5  *
6  * Copyright 2012 Peter Meerwald <pmeerw@pmeerw.net>
7  * Copyright 2019 Pursim SPC
8  *
9  * IIO driver for:
10  *   VCNL4000/10/20 (7-bit I2C slave address 0x13)
11  *   VCNL4040 (7-bit I2C slave address 0x60)
12  *   VCNL4200 (7-bit I2C slave address 0x51)
13  *
14  * TODO:
15  *   allow to adjust IR current
16  *   proximity threshold and event handling
17  *   periodic ALS/proximity measurement (VCNL4010/20)
18  *   interrupts (VCNL4010/20/40, VCNL4200)
19  */
20 
21 #include <linux/module.h>
22 #include <linux/i2c.h>
23 #include <linux/err.h>
24 #include <linux/delay.h>
25 
26 #include <linux/iio/iio.h>
27 #include <linux/iio/sysfs.h>
28 
29 #define VCNL4000_DRV_NAME "vcnl4000"
30 #define VCNL4000_PROD_ID	0x01
31 #define VCNL4010_PROD_ID	0x02 /* for VCNL4020, VCNL4010 */
32 #define VCNL4040_PROD_ID	0x86
33 #define VCNL4200_PROD_ID	0x58
34 
35 #define VCNL4000_COMMAND	0x80 /* Command register */
36 #define VCNL4000_PROD_REV	0x81 /* Product ID and Revision ID */
37 #define VCNL4000_LED_CURRENT	0x83 /* IR LED current for proximity mode */
38 #define VCNL4000_AL_PARAM	0x84 /* Ambient light parameter register */
39 #define VCNL4000_AL_RESULT_HI	0x85 /* Ambient light result register, MSB */
40 #define VCNL4000_AL_RESULT_LO	0x86 /* Ambient light result register, LSB */
41 #define VCNL4000_PS_RESULT_HI	0x87 /* Proximity result register, MSB */
42 #define VCNL4000_PS_RESULT_LO	0x88 /* Proximity result register, LSB */
43 #define VCNL4000_PS_MEAS_FREQ	0x89 /* Proximity test signal frequency */
44 #define VCNL4000_PS_MOD_ADJ	0x8a /* Proximity modulator timing adjustment */
45 
46 #define VCNL4200_AL_CONF	0x00 /* Ambient light configuration */
47 #define VCNL4200_PS_CONF1	0x03 /* Proximity configuration */
48 #define VCNL4200_PS_DATA	0x08 /* Proximity data */
49 #define VCNL4200_AL_DATA	0x09 /* Ambient light data */
50 #define VCNL4200_DEV_ID		0x0e /* Device ID, slave address and version */
51 
52 #define VCNL4040_DEV_ID		0x0c /* Device ID and version */
53 
54 /* Bit masks for COMMAND register */
55 #define VCNL4000_AL_RDY		BIT(6) /* ALS data ready? */
56 #define VCNL4000_PS_RDY		BIT(5) /* proximity data ready? */
57 #define VCNL4000_AL_OD		BIT(4) /* start on-demand ALS measurement */
58 #define VCNL4000_PS_OD		BIT(3) /* start on-demand proximity measurement */
59 
60 enum vcnl4000_device_ids {
61 	VCNL4000,
62 	VCNL4010,
63 	VCNL4040,
64 	VCNL4200,
65 };
66 
67 struct vcnl4200_channel {
68 	u8 reg;
69 	ktime_t last_measurement;
70 	ktime_t sampling_rate;
71 	struct mutex lock;
72 };
73 
74 struct vcnl4000_data {
75 	struct i2c_client *client;
76 	enum vcnl4000_device_ids id;
77 	int rev;
78 	int al_scale;
79 	const struct vcnl4000_chip_spec *chip_spec;
80 	struct mutex vcnl4000_lock;
81 	struct vcnl4200_channel vcnl4200_al;
82 	struct vcnl4200_channel vcnl4200_ps;
83 };
84 
85 struct vcnl4000_chip_spec {
86 	const char *prod;
87 	int (*init)(struct vcnl4000_data *data);
88 	int (*measure_light)(struct vcnl4000_data *data, int *val);
89 	int (*measure_proximity)(struct vcnl4000_data *data, int *val);
90 };
91 
92 static const struct i2c_device_id vcnl4000_id[] = {
93 	{ "vcnl4000", VCNL4000 },
94 	{ "vcnl4010", VCNL4010 },
95 	{ "vcnl4020", VCNL4010 },
96 	{ "vcnl4040", VCNL4040 },
97 	{ "vcnl4200", VCNL4200 },
98 	{ }
99 };
100 MODULE_DEVICE_TABLE(i2c, vcnl4000_id);
101 
102 static int vcnl4000_init(struct vcnl4000_data *data)
103 {
104 	int ret, prod_id;
105 
106 	ret = i2c_smbus_read_byte_data(data->client, VCNL4000_PROD_REV);
107 	if (ret < 0)
108 		return ret;
109 
110 	prod_id = ret >> 4;
111 	switch (prod_id) {
112 	case VCNL4000_PROD_ID:
113 		if (data->id != VCNL4000)
114 			dev_warn(&data->client->dev,
115 					"wrong device id, use vcnl4000");
116 		break;
117 	case VCNL4010_PROD_ID:
118 		if (data->id != VCNL4010)
119 			dev_warn(&data->client->dev,
120 					"wrong device id, use vcnl4010/4020");
121 		break;
122 	default:
123 		return -ENODEV;
124 	}
125 
126 	data->rev = ret & 0xf;
127 	data->al_scale = 250000;
128 	mutex_init(&data->vcnl4000_lock);
129 
130 	return 0;
131 };
132 
133 static int vcnl4200_init(struct vcnl4000_data *data)
134 {
135 	int ret, id;
136 
137 	ret = i2c_smbus_read_word_data(data->client, VCNL4200_DEV_ID);
138 	if (ret < 0)
139 		return ret;
140 
141 	id = ret & 0xff;
142 
143 	if (id != VCNL4200_PROD_ID) {
144 		ret = i2c_smbus_read_word_data(data->client, VCNL4040_DEV_ID);
145 		if (ret < 0)
146 			return ret;
147 
148 		id = ret & 0xff;
149 
150 		if (id != VCNL4040_PROD_ID)
151 			return -ENODEV;
152 	}
153 
154 	dev_dbg(&data->client->dev, "device id 0x%x", id);
155 
156 	data->rev = (ret >> 8) & 0xf;
157 
158 	/* Set defaults and enable both channels */
159 	ret = i2c_smbus_write_word_data(data->client, VCNL4200_AL_CONF, 0);
160 	if (ret < 0)
161 		return ret;
162 	ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1, 0);
163 	if (ret < 0)
164 		return ret;
165 
166 	data->vcnl4200_al.reg = VCNL4200_AL_DATA;
167 	data->vcnl4200_ps.reg = VCNL4200_PS_DATA;
168 	switch (id) {
169 	case VCNL4200_PROD_ID:
170 		/* Integration time is 50ms, but the experiments */
171 		/* show 54ms in total. */
172 		data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000);
173 		data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000);
174 		data->al_scale = 24000;
175 		break;
176 	case VCNL4040_PROD_ID:
177 		/* Integration time is 80ms, add 10ms. */
178 		data->vcnl4200_al.sampling_rate = ktime_set(0, 100000 * 1000);
179 		data->vcnl4200_ps.sampling_rate = ktime_set(0, 100000 * 1000);
180 		data->al_scale = 120000;
181 		break;
182 	}
183 	data->vcnl4200_al.last_measurement = ktime_set(0, 0);
184 	data->vcnl4200_ps.last_measurement = ktime_set(0, 0);
185 	mutex_init(&data->vcnl4200_al.lock);
186 	mutex_init(&data->vcnl4200_ps.lock);
187 
188 	return 0;
189 };
190 
191 static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
192 				u8 rdy_mask, u8 data_reg, int *val)
193 {
194 	int tries = 20;
195 	__be16 buf;
196 	int ret;
197 
198 	mutex_lock(&data->vcnl4000_lock);
199 
200 	ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND,
201 					req_mask);
202 	if (ret < 0)
203 		goto fail;
204 
205 	/* wait for data to become ready */
206 	while (tries--) {
207 		ret = i2c_smbus_read_byte_data(data->client, VCNL4000_COMMAND);
208 		if (ret < 0)
209 			goto fail;
210 		if (ret & rdy_mask)
211 			break;
212 		msleep(20); /* measurement takes up to 100 ms */
213 	}
214 
215 	if (tries < 0) {
216 		dev_err(&data->client->dev,
217 			"vcnl4000_measure() failed, data not ready\n");
218 		ret = -EIO;
219 		goto fail;
220 	}
221 
222 	ret = i2c_smbus_read_i2c_block_data(data->client,
223 		data_reg, sizeof(buf), (u8 *) &buf);
224 	if (ret < 0)
225 		goto fail;
226 
227 	mutex_unlock(&data->vcnl4000_lock);
228 	*val = be16_to_cpu(buf);
229 
230 	return 0;
231 
232 fail:
233 	mutex_unlock(&data->vcnl4000_lock);
234 	return ret;
235 }
236 
237 static int vcnl4200_measure(struct vcnl4000_data *data,
238 		struct vcnl4200_channel *chan, int *val)
239 {
240 	int ret;
241 	s64 delta;
242 	ktime_t next_measurement;
243 
244 	mutex_lock(&chan->lock);
245 
246 	next_measurement = ktime_add(chan->last_measurement,
247 			chan->sampling_rate);
248 	delta = ktime_us_delta(next_measurement, ktime_get());
249 	if (delta > 0)
250 		usleep_range(delta, delta + 500);
251 	chan->last_measurement = ktime_get();
252 
253 	mutex_unlock(&chan->lock);
254 
255 	ret = i2c_smbus_read_word_data(data->client, chan->reg);
256 	if (ret < 0)
257 		return ret;
258 
259 	*val = ret;
260 
261 	return 0;
262 }
263 
264 static int vcnl4000_measure_light(struct vcnl4000_data *data, int *val)
265 {
266 	return vcnl4000_measure(data,
267 			VCNL4000_AL_OD, VCNL4000_AL_RDY,
268 			VCNL4000_AL_RESULT_HI, val);
269 }
270 
271 static int vcnl4200_measure_light(struct vcnl4000_data *data, int *val)
272 {
273 	return vcnl4200_measure(data, &data->vcnl4200_al, val);
274 }
275 
276 static int vcnl4000_measure_proximity(struct vcnl4000_data *data, int *val)
277 {
278 	return vcnl4000_measure(data,
279 			VCNL4000_PS_OD, VCNL4000_PS_RDY,
280 			VCNL4000_PS_RESULT_HI, val);
281 }
282 
283 static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val)
284 {
285 	return vcnl4200_measure(data, &data->vcnl4200_ps, val);
286 }
287 
288 static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
289 	[VCNL4000] = {
290 		.prod = "VCNL4000",
291 		.init = vcnl4000_init,
292 		.measure_light = vcnl4000_measure_light,
293 		.measure_proximity = vcnl4000_measure_proximity,
294 	},
295 	[VCNL4010] = {
296 		.prod = "VCNL4010/4020",
297 		.init = vcnl4000_init,
298 		.measure_light = vcnl4000_measure_light,
299 		.measure_proximity = vcnl4000_measure_proximity,
300 	},
301 	[VCNL4040] = {
302 		.prod = "VCNL4040",
303 		.init = vcnl4200_init,
304 		.measure_light = vcnl4200_measure_light,
305 		.measure_proximity = vcnl4200_measure_proximity,
306 	},
307 	[VCNL4200] = {
308 		.prod = "VCNL4200",
309 		.init = vcnl4200_init,
310 		.measure_light = vcnl4200_measure_light,
311 		.measure_proximity = vcnl4200_measure_proximity,
312 	},
313 };
314 
315 static const struct iio_chan_spec vcnl4000_channels[] = {
316 	{
317 		.type = IIO_LIGHT,
318 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
319 			BIT(IIO_CHAN_INFO_SCALE),
320 	}, {
321 		.type = IIO_PROXIMITY,
322 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
323 	}
324 };
325 
326 static int vcnl4000_read_raw(struct iio_dev *indio_dev,
327 				struct iio_chan_spec const *chan,
328 				int *val, int *val2, long mask)
329 {
330 	int ret;
331 	struct vcnl4000_data *data = iio_priv(indio_dev);
332 
333 	switch (mask) {
334 	case IIO_CHAN_INFO_RAW:
335 		switch (chan->type) {
336 		case IIO_LIGHT:
337 			ret = data->chip_spec->measure_light(data, val);
338 			if (ret < 0)
339 				return ret;
340 			return IIO_VAL_INT;
341 		case IIO_PROXIMITY:
342 			ret = data->chip_spec->measure_proximity(data, val);
343 			if (ret < 0)
344 				return ret;
345 			return IIO_VAL_INT;
346 		default:
347 			return -EINVAL;
348 		}
349 	case IIO_CHAN_INFO_SCALE:
350 		if (chan->type != IIO_LIGHT)
351 			return -EINVAL;
352 
353 		*val = 0;
354 		*val2 = data->al_scale;
355 		return IIO_VAL_INT_PLUS_MICRO;
356 	default:
357 		return -EINVAL;
358 	}
359 }
360 
361 static const struct iio_info vcnl4000_info = {
362 	.read_raw = vcnl4000_read_raw,
363 };
364 
365 static int vcnl4000_probe(struct i2c_client *client,
366 			  const struct i2c_device_id *id)
367 {
368 	struct vcnl4000_data *data;
369 	struct iio_dev *indio_dev;
370 	int ret;
371 
372 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
373 	if (!indio_dev)
374 		return -ENOMEM;
375 
376 	data = iio_priv(indio_dev);
377 	i2c_set_clientdata(client, indio_dev);
378 	data->client = client;
379 	data->id = id->driver_data;
380 	data->chip_spec = &vcnl4000_chip_spec_cfg[data->id];
381 
382 	ret = data->chip_spec->init(data);
383 	if (ret < 0)
384 		return ret;
385 
386 	dev_dbg(&client->dev, "%s Ambient light/proximity sensor, Rev: %02x\n",
387 		data->chip_spec->prod, data->rev);
388 
389 	indio_dev->dev.parent = &client->dev;
390 	indio_dev->info = &vcnl4000_info;
391 	indio_dev->channels = vcnl4000_channels;
392 	indio_dev->num_channels = ARRAY_SIZE(vcnl4000_channels);
393 	indio_dev->name = VCNL4000_DRV_NAME;
394 	indio_dev->modes = INDIO_DIRECT_MODE;
395 
396 	return devm_iio_device_register(&client->dev, indio_dev);
397 }
398 
399 static const struct of_device_id vcnl_4000_of_match[] = {
400 	{
401 		.compatible = "vishay,vcnl4000",
402 		.data = (void *)VCNL4000,
403 	},
404 	{
405 		.compatible = "vishay,vcnl4010",
406 		.data = (void *)VCNL4010,
407 	},
408 	{
409 		.compatible = "vishay,vcnl4020",
410 		.data = (void *)VCNL4010,
411 	},
412 	{
413 		.compatible = "vishay,vcnl4040",
414 		.data = (void *)VCNL4040,
415 	},
416 	{
417 		.compatible = "vishay,vcnl4200",
418 		.data = (void *)VCNL4200,
419 	},
420 	{},
421 };
422 MODULE_DEVICE_TABLE(of, vcnl_4000_of_match);
423 
424 static struct i2c_driver vcnl4000_driver = {
425 	.driver = {
426 		.name   = VCNL4000_DRV_NAME,
427 		.of_match_table = vcnl_4000_of_match,
428 	},
429 	.probe  = vcnl4000_probe,
430 	.id_table = vcnl4000_id,
431 };
432 
433 module_i2c_driver(vcnl4000_driver);
434 
435 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
436 MODULE_DESCRIPTION("Vishay VCNL4000 proximity/ambient light sensor driver");
437 MODULE_LICENSE("GPL");
438