1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Device driver for monitoring ambient light intensity (lux) 4 * within the TAOS tsl258x family of devices (tsl2580, tsl2581, tsl2583). 5 * 6 * Copyright (c) 2011, TAOS Corporation. 7 * Copyright (c) 2016-2017 Brian Masney <masneyb@onstation.org> 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/i2c.h> 12 #include <linux/errno.h> 13 #include <linux/delay.h> 14 #include <linux/string.h> 15 #include <linux/mutex.h> 16 #include <linux/unistd.h> 17 #include <linux/slab.h> 18 #include <linux/module.h> 19 #include <linux/iio/iio.h> 20 #include <linux/iio/sysfs.h> 21 #include <linux/pm_runtime.h> 22 23 /* Device Registers and Masks */ 24 #define TSL2583_CNTRL 0x00 25 #define TSL2583_ALS_TIME 0X01 26 #define TSL2583_INTERRUPT 0x02 27 #define TSL2583_GAIN 0x07 28 #define TSL2583_REVID 0x11 29 #define TSL2583_CHIPID 0x12 30 #define TSL2583_ALS_CHAN0LO 0x14 31 #define TSL2583_ALS_CHAN0HI 0x15 32 #define TSL2583_ALS_CHAN1LO 0x16 33 #define TSL2583_ALS_CHAN1HI 0x17 34 #define TSL2583_TMR_LO 0x18 35 #define TSL2583_TMR_HI 0x19 36 37 /* tsl2583 cmd reg masks */ 38 #define TSL2583_CMD_REG 0x80 39 #define TSL2583_CMD_SPL_FN 0x60 40 #define TSL2583_CMD_ALS_INT_CLR 0x01 41 42 /* tsl2583 cntrl reg masks */ 43 #define TSL2583_CNTL_ADC_ENBL 0x02 44 #define TSL2583_CNTL_PWR_OFF 0x00 45 #define TSL2583_CNTL_PWR_ON 0x01 46 47 /* tsl2583 status reg masks */ 48 #define TSL2583_STA_ADC_VALID 0x01 49 #define TSL2583_STA_ADC_INTR 0x10 50 51 /* Lux calculation constants */ 52 #define TSL2583_LUX_CALC_OVER_FLOW 65535 53 54 #define TSL2583_INTERRUPT_DISABLED 0x00 55 56 #define TSL2583_CHIP_ID 0x90 57 #define TSL2583_CHIP_ID_MASK 0xf0 58 59 #define TSL2583_POWER_OFF_DELAY_MS 2000 60 61 /* Per-device data */ 62 struct tsl2583_als_info { 63 u16 als_ch0; 64 u16 als_ch1; 65 u16 lux; 66 }; 67 68 struct tsl2583_lux { 69 unsigned int ratio; 70 unsigned int ch0; 71 unsigned int ch1; 72 }; 73 74 static const struct tsl2583_lux tsl2583_default_lux[] = { 75 { 9830, 8520, 15729 }, 76 { 12452, 10807, 23344 }, 77 { 14746, 6383, 11705 }, 78 { 17695, 4063, 6554 }, 79 { 0, 0, 0 } /* Termination segment */ 80 }; 81 82 #define TSL2583_MAX_LUX_TABLE_ENTRIES 11 83 84 struct tsl2583_settings { 85 int als_time; 86 int als_gain; 87 int als_gain_trim; 88 int als_cal_target; 89 90 /* 91 * This structure is intentionally large to accommodate updates via 92 * sysfs. Sized to 11 = max 10 segments + 1 termination segment. 93 * Assumption is that one and only one type of glass used. 94 */ 95 struct tsl2583_lux als_device_lux[TSL2583_MAX_LUX_TABLE_ENTRIES]; 96 }; 97 98 struct tsl2583_chip { 99 struct mutex als_mutex; 100 struct i2c_client *client; 101 struct tsl2583_als_info als_cur_info; 102 struct tsl2583_settings als_settings; 103 int als_time_scale; 104 int als_saturation; 105 }; 106 107 struct gainadj { 108 s16 ch0; 109 s16 ch1; 110 s16 mean; 111 }; 112 113 /* Index = (0 - 3) Used to validate the gain selection index */ 114 static const struct gainadj gainadj[] = { 115 { 1, 1, 1 }, 116 { 8, 8, 8 }, 117 { 16, 16, 16 }, 118 { 107, 115, 111 } 119 }; 120 121 /* 122 * Provides initial operational parameter defaults. 123 * These defaults may be changed through the device's sysfs files. 124 */ 125 static void tsl2583_defaults(struct tsl2583_chip *chip) 126 { 127 /* 128 * The integration time must be a multiple of 50ms and within the 129 * range [50, 600] ms. 130 */ 131 chip->als_settings.als_time = 100; 132 133 /* 134 * This is an index into the gainadj table. Assume clear glass as the 135 * default. 136 */ 137 chip->als_settings.als_gain = 0; 138 139 /* Default gain trim to account for aperture effects */ 140 chip->als_settings.als_gain_trim = 1000; 141 142 /* Known external ALS reading used for calibration */ 143 chip->als_settings.als_cal_target = 130; 144 145 /* Default lux table. */ 146 memcpy(chip->als_settings.als_device_lux, tsl2583_default_lux, 147 sizeof(tsl2583_default_lux)); 148 } 149 150 /* 151 * Reads and calculates current lux value. 152 * The raw ch0 and ch1 values of the ambient light sensed in the last 153 * integration cycle are read from the device. 154 * Time scale factor array values are adjusted based on the integration time. 155 * The raw values are multiplied by a scale factor, and device gain is obtained 156 * using gain index. Limit checks are done next, then the ratio of a multiple 157 * of ch1 value, to the ch0 value, is calculated. The array als_device_lux[] 158 * declared above is then scanned to find the first ratio value that is just 159 * above the ratio we just calculated. The ch0 and ch1 multiplier constants in 160 * the array are then used along with the time scale factor array values, to 161 * calculate the lux. 162 */ 163 static int tsl2583_get_lux(struct iio_dev *indio_dev) 164 { 165 u16 ch0, ch1; /* separated ch0/ch1 data from device */ 166 u32 lux; /* raw lux calculated from device data */ 167 u64 lux64; 168 u32 ratio; 169 u8 buf[5]; 170 struct tsl2583_lux *p; 171 struct tsl2583_chip *chip = iio_priv(indio_dev); 172 int i, ret; 173 174 ret = i2c_smbus_read_byte_data(chip->client, TSL2583_CMD_REG); 175 if (ret < 0) { 176 dev_err(&chip->client->dev, "%s: failed to read CMD_REG register\n", 177 __func__); 178 goto done; 179 } 180 181 /* is data new & valid */ 182 if (!(ret & TSL2583_STA_ADC_INTR)) { 183 dev_err(&chip->client->dev, "%s: data not valid; returning last value\n", 184 __func__); 185 ret = chip->als_cur_info.lux; /* return LAST VALUE */ 186 goto done; 187 } 188 189 for (i = 0; i < 4; i++) { 190 int reg = TSL2583_CMD_REG | (TSL2583_ALS_CHAN0LO + i); 191 192 ret = i2c_smbus_read_byte_data(chip->client, reg); 193 if (ret < 0) { 194 dev_err(&chip->client->dev, "%s: failed to read register %x\n", 195 __func__, reg); 196 goto done; 197 } 198 buf[i] = ret; 199 } 200 201 /* 202 * Clear the pending interrupt status bit on the chip to allow the next 203 * integration cycle to start. This has to be done even though this 204 * driver currently does not support interrupts. 205 */ 206 ret = i2c_smbus_write_byte(chip->client, 207 (TSL2583_CMD_REG | TSL2583_CMD_SPL_FN | 208 TSL2583_CMD_ALS_INT_CLR)); 209 if (ret < 0) { 210 dev_err(&chip->client->dev, "%s: failed to clear the interrupt bit\n", 211 __func__); 212 goto done; /* have no data, so return failure */ 213 } 214 215 /* extract ALS/lux data */ 216 ch0 = le16_to_cpup((const __le16 *)&buf[0]); 217 ch1 = le16_to_cpup((const __le16 *)&buf[2]); 218 219 chip->als_cur_info.als_ch0 = ch0; 220 chip->als_cur_info.als_ch1 = ch1; 221 222 if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation)) 223 goto return_max; 224 225 if (!ch0) { 226 /* 227 * The sensor appears to be in total darkness so set the 228 * calculated lux to 0 and return early to avoid a division by 229 * zero below when calculating the ratio. 230 */ 231 ret = 0; 232 chip->als_cur_info.lux = 0; 233 goto done; 234 } 235 236 /* calculate ratio */ 237 ratio = (ch1 << 15) / ch0; 238 239 /* convert to unscaled lux using the pointer to the table */ 240 for (p = (struct tsl2583_lux *)chip->als_settings.als_device_lux; 241 p->ratio != 0 && p->ratio < ratio; p++) 242 ; 243 244 if (p->ratio == 0) { 245 lux = 0; 246 } else { 247 u32 ch0lux, ch1lux; 248 249 ch0lux = ((ch0 * p->ch0) + 250 (gainadj[chip->als_settings.als_gain].ch0 >> 1)) 251 / gainadj[chip->als_settings.als_gain].ch0; 252 ch1lux = ((ch1 * p->ch1) + 253 (gainadj[chip->als_settings.als_gain].ch1 >> 1)) 254 / gainadj[chip->als_settings.als_gain].ch1; 255 256 /* note: lux is 31 bit max at this point */ 257 if (ch1lux > ch0lux) { 258 dev_dbg(&chip->client->dev, "%s: No Data - Returning 0\n", 259 __func__); 260 ret = 0; 261 chip->als_cur_info.lux = 0; 262 goto done; 263 } 264 265 lux = ch0lux - ch1lux; 266 } 267 268 /* adjust for active time scale */ 269 if (chip->als_time_scale == 0) 270 lux = 0; 271 else 272 lux = (lux + (chip->als_time_scale >> 1)) / 273 chip->als_time_scale; 274 275 /* 276 * Adjust for active gain scale. 277 * The tsl2583_default_lux tables above have a factor of 8192 built in, 278 * so we need to shift right. 279 * User-specified gain provides a multiplier. 280 * Apply user-specified gain before shifting right to retain precision. 281 * Use 64 bits to avoid overflow on multiplication. 282 * Then go back to 32 bits before division to avoid using div_u64(). 283 */ 284 lux64 = lux; 285 lux64 = lux64 * chip->als_settings.als_gain_trim; 286 lux64 >>= 13; 287 lux = lux64; 288 lux = (lux + 500) / 1000; 289 290 if (lux > TSL2583_LUX_CALC_OVER_FLOW) { /* check for overflow */ 291 return_max: 292 lux = TSL2583_LUX_CALC_OVER_FLOW; 293 } 294 295 /* Update the structure with the latest VALID lux. */ 296 chip->als_cur_info.lux = lux; 297 ret = lux; 298 299 done: 300 return ret; 301 } 302 303 /* 304 * Obtain single reading and calculate the als_gain_trim (later used 305 * to derive actual lux). 306 * Return updated gain_trim value. 307 */ 308 static int tsl2583_als_calibrate(struct iio_dev *indio_dev) 309 { 310 struct tsl2583_chip *chip = iio_priv(indio_dev); 311 unsigned int gain_trim_val; 312 int ret; 313 int lux_val; 314 315 ret = i2c_smbus_read_byte_data(chip->client, 316 TSL2583_CMD_REG | TSL2583_CNTRL); 317 if (ret < 0) { 318 dev_err(&chip->client->dev, 319 "%s: failed to read from the CNTRL register\n", 320 __func__); 321 return ret; 322 } 323 324 if ((ret & (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON)) 325 != (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON)) { 326 dev_err(&chip->client->dev, 327 "%s: Device is not powered on and/or ADC is not enabled\n", 328 __func__); 329 return -EINVAL; 330 } else if ((ret & TSL2583_STA_ADC_VALID) != TSL2583_STA_ADC_VALID) { 331 dev_err(&chip->client->dev, 332 "%s: The two ADC channels have not completed an integration cycle\n", 333 __func__); 334 return -ENODATA; 335 } 336 337 lux_val = tsl2583_get_lux(indio_dev); 338 if (lux_val < 0) { 339 dev_err(&chip->client->dev, "%s: failed to get lux\n", 340 __func__); 341 return lux_val; 342 } 343 344 gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target) 345 * chip->als_settings.als_gain_trim) / lux_val); 346 if ((gain_trim_val < 250) || (gain_trim_val > 4000)) { 347 dev_err(&chip->client->dev, 348 "%s: trim_val of %d is not within the range [250, 4000]\n", 349 __func__, gain_trim_val); 350 return -ENODATA; 351 } 352 353 chip->als_settings.als_gain_trim = (int)gain_trim_val; 354 355 return 0; 356 } 357 358 static int tsl2583_set_als_time(struct tsl2583_chip *chip) 359 { 360 int als_count, als_time, ret; 361 u8 val; 362 363 /* determine als integration register */ 364 als_count = (chip->als_settings.als_time * 100 + 135) / 270; 365 if (!als_count) 366 als_count = 1; /* ensure at least one cycle */ 367 368 /* convert back to time (encompasses overrides) */ 369 als_time = (als_count * 27 + 5) / 10; 370 371 val = 256 - als_count; 372 ret = i2c_smbus_write_byte_data(chip->client, 373 TSL2583_CMD_REG | TSL2583_ALS_TIME, 374 val); 375 if (ret < 0) { 376 dev_err(&chip->client->dev, "%s: failed to set the als time to %d\n", 377 __func__, val); 378 return ret; 379 } 380 381 /* set chip struct re scaling and saturation */ 382 chip->als_saturation = als_count * 922; /* 90% of full scale */ 383 chip->als_time_scale = (als_time + 25) / 50; 384 385 return ret; 386 } 387 388 static int tsl2583_set_als_gain(struct tsl2583_chip *chip) 389 { 390 int ret; 391 392 /* Set the gain based on als_settings struct */ 393 ret = i2c_smbus_write_byte_data(chip->client, 394 TSL2583_CMD_REG | TSL2583_GAIN, 395 chip->als_settings.als_gain); 396 if (ret < 0) 397 dev_err(&chip->client->dev, 398 "%s: failed to set the gain to %d\n", __func__, 399 chip->als_settings.als_gain); 400 401 return ret; 402 } 403 404 static int tsl2583_set_power_state(struct tsl2583_chip *chip, u8 state) 405 { 406 int ret; 407 408 ret = i2c_smbus_write_byte_data(chip->client, 409 TSL2583_CMD_REG | TSL2583_CNTRL, state); 410 if (ret < 0) 411 dev_err(&chip->client->dev, 412 "%s: failed to set the power state to %d\n", __func__, 413 state); 414 415 return ret; 416 } 417 418 /* 419 * Turn the device on. 420 * Configuration must be set before calling this function. 421 */ 422 static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev) 423 { 424 struct tsl2583_chip *chip = iio_priv(indio_dev); 425 int ret; 426 427 /* Power on the device; ADC off. */ 428 ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON); 429 if (ret < 0) 430 return ret; 431 432 ret = i2c_smbus_write_byte_data(chip->client, 433 TSL2583_CMD_REG | TSL2583_INTERRUPT, 434 TSL2583_INTERRUPT_DISABLED); 435 if (ret < 0) { 436 dev_err(&chip->client->dev, 437 "%s: failed to disable interrupts\n", __func__); 438 return ret; 439 } 440 441 ret = tsl2583_set_als_time(chip); 442 if (ret < 0) 443 return ret; 444 445 ret = tsl2583_set_als_gain(chip); 446 if (ret < 0) 447 return ret; 448 449 usleep_range(3000, 3500); 450 451 ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON | 452 TSL2583_CNTL_ADC_ENBL); 453 if (ret < 0) 454 return ret; 455 456 return ret; 457 } 458 459 /* Sysfs Interface Functions */ 460 461 static ssize_t in_illuminance_input_target_show(struct device *dev, 462 struct device_attribute *attr, 463 char *buf) 464 { 465 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 466 struct tsl2583_chip *chip = iio_priv(indio_dev); 467 int ret; 468 469 mutex_lock(&chip->als_mutex); 470 ret = sprintf(buf, "%d\n", chip->als_settings.als_cal_target); 471 mutex_unlock(&chip->als_mutex); 472 473 return ret; 474 } 475 476 static ssize_t in_illuminance_input_target_store(struct device *dev, 477 struct device_attribute *attr, 478 const char *buf, size_t len) 479 { 480 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 481 struct tsl2583_chip *chip = iio_priv(indio_dev); 482 int value; 483 484 if (kstrtoint(buf, 0, &value) || !value) 485 return -EINVAL; 486 487 mutex_lock(&chip->als_mutex); 488 chip->als_settings.als_cal_target = value; 489 mutex_unlock(&chip->als_mutex); 490 491 return len; 492 } 493 494 static ssize_t in_illuminance_calibrate_store(struct device *dev, 495 struct device_attribute *attr, 496 const char *buf, size_t len) 497 { 498 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 499 struct tsl2583_chip *chip = iio_priv(indio_dev); 500 int value, ret; 501 502 if (kstrtoint(buf, 0, &value) || value != 1) 503 return -EINVAL; 504 505 mutex_lock(&chip->als_mutex); 506 507 ret = tsl2583_als_calibrate(indio_dev); 508 if (ret < 0) 509 goto done; 510 511 ret = len; 512 done: 513 mutex_unlock(&chip->als_mutex); 514 515 return ret; 516 } 517 518 static ssize_t in_illuminance_lux_table_show(struct device *dev, 519 struct device_attribute *attr, 520 char *buf) 521 { 522 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 523 struct tsl2583_chip *chip = iio_priv(indio_dev); 524 unsigned int i; 525 int offset = 0; 526 527 for (i = 0; i < ARRAY_SIZE(chip->als_settings.als_device_lux); i++) { 528 offset += sprintf(buf + offset, "%u,%u,%u,", 529 chip->als_settings.als_device_lux[i].ratio, 530 chip->als_settings.als_device_lux[i].ch0, 531 chip->als_settings.als_device_lux[i].ch1); 532 if (chip->als_settings.als_device_lux[i].ratio == 0) { 533 /* 534 * We just printed the first "0" entry. 535 * Now get rid of the extra "," and break. 536 */ 537 offset--; 538 break; 539 } 540 } 541 542 offset += sprintf(buf + offset, "\n"); 543 544 return offset; 545 } 546 547 static ssize_t in_illuminance_lux_table_store(struct device *dev, 548 struct device_attribute *attr, 549 const char *buf, size_t len) 550 { 551 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 552 struct tsl2583_chip *chip = iio_priv(indio_dev); 553 const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3; 554 int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3 + 1]; 555 int ret = -EINVAL; 556 unsigned int n; 557 558 mutex_lock(&chip->als_mutex); 559 560 get_options(buf, ARRAY_SIZE(value), value); 561 562 /* 563 * We now have an array of ints starting at value[1], and 564 * enumerated by value[0]. 565 * We expect each group of three ints is one table entry, 566 * and the last table entry is all 0. 567 */ 568 n = value[0]; 569 if ((n % 3) || n < 6 || n > max_ints) { 570 dev_err(dev, 571 "%s: The number of entries in the lux table must be a multiple of 3 and within the range [6, %d]\n", 572 __func__, max_ints); 573 goto done; 574 } 575 if ((value[n - 2] | value[n - 1] | value[n]) != 0) { 576 dev_err(dev, "%s: The last 3 entries in the lux table must be zeros.\n", 577 __func__); 578 goto done; 579 } 580 581 memcpy(chip->als_settings.als_device_lux, &value[1], 582 value[0] * sizeof(value[1])); 583 584 ret = len; 585 586 done: 587 mutex_unlock(&chip->als_mutex); 588 589 return ret; 590 } 591 592 static IIO_CONST_ATTR(in_illuminance_calibscale_available, "1 8 16 111"); 593 static IIO_CONST_ATTR(in_illuminance_integration_time_available, 594 "0.050 0.100 0.150 0.200 0.250 0.300 0.350 0.400 0.450 0.500 0.550 0.600 0.650"); 595 static IIO_DEVICE_ATTR_RW(in_illuminance_input_target, 0); 596 static IIO_DEVICE_ATTR_WO(in_illuminance_calibrate, 0); 597 static IIO_DEVICE_ATTR_RW(in_illuminance_lux_table, 0); 598 599 static struct attribute *sysfs_attrs_ctrl[] = { 600 &iio_const_attr_in_illuminance_calibscale_available.dev_attr.attr, 601 &iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr, 602 &iio_dev_attr_in_illuminance_input_target.dev_attr.attr, 603 &iio_dev_attr_in_illuminance_calibrate.dev_attr.attr, 604 &iio_dev_attr_in_illuminance_lux_table.dev_attr.attr, 605 NULL 606 }; 607 608 static const struct attribute_group tsl2583_attribute_group = { 609 .attrs = sysfs_attrs_ctrl, 610 }; 611 612 static const struct iio_chan_spec tsl2583_channels[] = { 613 { 614 .type = IIO_LIGHT, 615 .modified = 1, 616 .channel2 = IIO_MOD_LIGHT_IR, 617 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 618 }, 619 { 620 .type = IIO_LIGHT, 621 .modified = 1, 622 .channel2 = IIO_MOD_LIGHT_BOTH, 623 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 624 }, 625 { 626 .type = IIO_LIGHT, 627 .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | 628 BIT(IIO_CHAN_INFO_CALIBBIAS) | 629 BIT(IIO_CHAN_INFO_CALIBSCALE) | 630 BIT(IIO_CHAN_INFO_INT_TIME), 631 }, 632 }; 633 634 static int tsl2583_set_pm_runtime_busy(struct tsl2583_chip *chip, bool on) 635 { 636 int ret; 637 638 if (on) { 639 ret = pm_runtime_get_sync(&chip->client->dev); 640 if (ret < 0) 641 pm_runtime_put_noidle(&chip->client->dev); 642 } else { 643 pm_runtime_mark_last_busy(&chip->client->dev); 644 ret = pm_runtime_put_autosuspend(&chip->client->dev); 645 } 646 647 return ret; 648 } 649 650 static int tsl2583_read_raw(struct iio_dev *indio_dev, 651 struct iio_chan_spec const *chan, 652 int *val, int *val2, long mask) 653 { 654 struct tsl2583_chip *chip = iio_priv(indio_dev); 655 int ret, pm_ret; 656 657 ret = tsl2583_set_pm_runtime_busy(chip, true); 658 if (ret < 0) 659 return ret; 660 661 mutex_lock(&chip->als_mutex); 662 663 ret = -EINVAL; 664 switch (mask) { 665 case IIO_CHAN_INFO_RAW: 666 if (chan->type == IIO_LIGHT) { 667 ret = tsl2583_get_lux(indio_dev); 668 if (ret < 0) 669 goto read_done; 670 671 /* 672 * From page 20 of the TSL2581, TSL2583 data 673 * sheet (TAOS134 − MARCH 2011): 674 * 675 * One of the photodiodes (channel 0) is 676 * sensitive to both visible and infrared light, 677 * while the second photodiode (channel 1) is 678 * sensitive primarily to infrared light. 679 */ 680 if (chan->channel2 == IIO_MOD_LIGHT_BOTH) 681 *val = chip->als_cur_info.als_ch0; 682 else 683 *val = chip->als_cur_info.als_ch1; 684 685 ret = IIO_VAL_INT; 686 } 687 break; 688 case IIO_CHAN_INFO_PROCESSED: 689 if (chan->type == IIO_LIGHT) { 690 ret = tsl2583_get_lux(indio_dev); 691 if (ret < 0) 692 goto read_done; 693 694 *val = ret; 695 ret = IIO_VAL_INT; 696 } 697 break; 698 case IIO_CHAN_INFO_CALIBBIAS: 699 if (chan->type == IIO_LIGHT) { 700 *val = chip->als_settings.als_gain_trim; 701 ret = IIO_VAL_INT; 702 } 703 break; 704 case IIO_CHAN_INFO_CALIBSCALE: 705 if (chan->type == IIO_LIGHT) { 706 *val = gainadj[chip->als_settings.als_gain].mean; 707 ret = IIO_VAL_INT; 708 } 709 break; 710 case IIO_CHAN_INFO_INT_TIME: 711 if (chan->type == IIO_LIGHT) { 712 *val = 0; 713 *val2 = chip->als_settings.als_time; 714 ret = IIO_VAL_INT_PLUS_MICRO; 715 } 716 break; 717 default: 718 break; 719 } 720 721 read_done: 722 mutex_unlock(&chip->als_mutex); 723 724 if (ret < 0) 725 return ret; 726 727 /* 728 * Preserve the ret variable if the call to 729 * tsl2583_set_pm_runtime_busy() is successful so the reading 730 * (if applicable) is returned to user space. 731 */ 732 pm_ret = tsl2583_set_pm_runtime_busy(chip, false); 733 if (pm_ret < 0) 734 return pm_ret; 735 736 return ret; 737 } 738 739 static int tsl2583_write_raw(struct iio_dev *indio_dev, 740 struct iio_chan_spec const *chan, 741 int val, int val2, long mask) 742 { 743 struct tsl2583_chip *chip = iio_priv(indio_dev); 744 int ret; 745 746 ret = tsl2583_set_pm_runtime_busy(chip, true); 747 if (ret < 0) 748 return ret; 749 750 mutex_lock(&chip->als_mutex); 751 752 ret = -EINVAL; 753 switch (mask) { 754 case IIO_CHAN_INFO_CALIBBIAS: 755 if (chan->type == IIO_LIGHT) { 756 chip->als_settings.als_gain_trim = val; 757 ret = 0; 758 } 759 break; 760 case IIO_CHAN_INFO_CALIBSCALE: 761 if (chan->type == IIO_LIGHT) { 762 unsigned int i; 763 764 for (i = 0; i < ARRAY_SIZE(gainadj); i++) { 765 if (gainadj[i].mean == val) { 766 chip->als_settings.als_gain = i; 767 ret = tsl2583_set_als_gain(chip); 768 break; 769 } 770 } 771 } 772 break; 773 case IIO_CHAN_INFO_INT_TIME: 774 if (chan->type == IIO_LIGHT && !val && val2 >= 50 && 775 val2 <= 650 && !(val2 % 50)) { 776 chip->als_settings.als_time = val2; 777 ret = tsl2583_set_als_time(chip); 778 } 779 break; 780 default: 781 break; 782 } 783 784 mutex_unlock(&chip->als_mutex); 785 786 if (ret < 0) 787 return ret; 788 789 ret = tsl2583_set_pm_runtime_busy(chip, false); 790 if (ret < 0) 791 return ret; 792 793 return ret; 794 } 795 796 static const struct iio_info tsl2583_info = { 797 .attrs = &tsl2583_attribute_group, 798 .read_raw = tsl2583_read_raw, 799 .write_raw = tsl2583_write_raw, 800 }; 801 802 static int tsl2583_probe(struct i2c_client *clientp, 803 const struct i2c_device_id *idp) 804 { 805 int ret; 806 struct tsl2583_chip *chip; 807 struct iio_dev *indio_dev; 808 809 if (!i2c_check_functionality(clientp->adapter, 810 I2C_FUNC_SMBUS_BYTE_DATA)) { 811 dev_err(&clientp->dev, "%s: i2c smbus byte data functionality is unsupported\n", 812 __func__); 813 return -EOPNOTSUPP; 814 } 815 816 indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip)); 817 if (!indio_dev) 818 return -ENOMEM; 819 820 chip = iio_priv(indio_dev); 821 chip->client = clientp; 822 i2c_set_clientdata(clientp, indio_dev); 823 824 mutex_init(&chip->als_mutex); 825 826 ret = i2c_smbus_read_byte_data(clientp, 827 TSL2583_CMD_REG | TSL2583_CHIPID); 828 if (ret < 0) { 829 dev_err(&clientp->dev, 830 "%s: failed to read the chip ID register\n", __func__); 831 return ret; 832 } 833 834 if ((ret & TSL2583_CHIP_ID_MASK) != TSL2583_CHIP_ID) { 835 dev_err(&clientp->dev, "%s: received an unknown chip ID %x\n", 836 __func__, ret); 837 return -EINVAL; 838 } 839 840 indio_dev->info = &tsl2583_info; 841 indio_dev->channels = tsl2583_channels; 842 indio_dev->num_channels = ARRAY_SIZE(tsl2583_channels); 843 indio_dev->dev.parent = &clientp->dev; 844 indio_dev->modes = INDIO_DIRECT_MODE; 845 indio_dev->name = chip->client->name; 846 847 pm_runtime_enable(&clientp->dev); 848 pm_runtime_set_autosuspend_delay(&clientp->dev, 849 TSL2583_POWER_OFF_DELAY_MS); 850 pm_runtime_use_autosuspend(&clientp->dev); 851 852 ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev); 853 if (ret) { 854 dev_err(&clientp->dev, "%s: iio registration failed\n", 855 __func__); 856 return ret; 857 } 858 859 /* Load up the V2 defaults (these are hard coded defaults for now) */ 860 tsl2583_defaults(chip); 861 862 dev_info(&clientp->dev, "Light sensor found.\n"); 863 864 return 0; 865 } 866 867 static int tsl2583_remove(struct i2c_client *client) 868 { 869 struct iio_dev *indio_dev = i2c_get_clientdata(client); 870 struct tsl2583_chip *chip = iio_priv(indio_dev); 871 872 iio_device_unregister(indio_dev); 873 874 pm_runtime_disable(&client->dev); 875 pm_runtime_set_suspended(&client->dev); 876 pm_runtime_put_noidle(&client->dev); 877 878 return tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF); 879 } 880 881 static int __maybe_unused tsl2583_suspend(struct device *dev) 882 { 883 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 884 struct tsl2583_chip *chip = iio_priv(indio_dev); 885 int ret; 886 887 mutex_lock(&chip->als_mutex); 888 889 ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF); 890 891 mutex_unlock(&chip->als_mutex); 892 893 return ret; 894 } 895 896 static int __maybe_unused tsl2583_resume(struct device *dev) 897 { 898 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 899 struct tsl2583_chip *chip = iio_priv(indio_dev); 900 int ret; 901 902 mutex_lock(&chip->als_mutex); 903 904 ret = tsl2583_chip_init_and_power_on(indio_dev); 905 906 mutex_unlock(&chip->als_mutex); 907 908 return ret; 909 } 910 911 static const struct dev_pm_ops tsl2583_pm_ops = { 912 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, 913 pm_runtime_force_resume) 914 SET_RUNTIME_PM_OPS(tsl2583_suspend, tsl2583_resume, NULL) 915 }; 916 917 static const struct i2c_device_id tsl2583_idtable[] = { 918 { "tsl2580", 0 }, 919 { "tsl2581", 1 }, 920 { "tsl2583", 2 }, 921 {} 922 }; 923 MODULE_DEVICE_TABLE(i2c, tsl2583_idtable); 924 925 static const struct of_device_id tsl2583_of_match[] = { 926 { .compatible = "amstaos,tsl2580", }, 927 { .compatible = "amstaos,tsl2581", }, 928 { .compatible = "amstaos,tsl2583", }, 929 { }, 930 }; 931 MODULE_DEVICE_TABLE(of, tsl2583_of_match); 932 933 /* Driver definition */ 934 static struct i2c_driver tsl2583_driver = { 935 .driver = { 936 .name = "tsl2583", 937 .pm = &tsl2583_pm_ops, 938 .of_match_table = tsl2583_of_match, 939 }, 940 .id_table = tsl2583_idtable, 941 .probe = tsl2583_probe, 942 .remove = tsl2583_remove, 943 }; 944 module_i2c_driver(tsl2583_driver); 945 946 MODULE_AUTHOR("J. August Brenner <jbrenner@taosinc.com>"); 947 MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>"); 948 MODULE_DESCRIPTION("TAOS tsl2583 ambient light sensor driver"); 949 MODULE_LICENSE("GPL"); 950