1 /* 2 * drivers/iio/light/tsl2563.c 3 * 4 * Copyright (C) 2008 Nokia Corporation 5 * 6 * Written by Timo O. Karjalainen <timo.o.karjalainen@nokia.com> 7 * Contact: Amit Kucheria <amit.kucheria@verdurent.com> 8 * 9 * Converted to IIO driver 10 * Amit Kucheria <amit.kucheria@verdurent.com> 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License 14 * version 2 as published by the Free Software Foundation. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 19 * General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 24 * 02110-1301 USA 25 */ 26 27 #include <linux/module.h> 28 #include <linux/i2c.h> 29 #include <linux/interrupt.h> 30 #include <linux/irq.h> 31 #include <linux/sched.h> 32 #include <linux/mutex.h> 33 #include <linux/delay.h> 34 #include <linux/pm.h> 35 #include <linux/err.h> 36 #include <linux/slab.h> 37 38 #include <linux/iio/iio.h> 39 #include <linux/iio/sysfs.h> 40 #include <linux/iio/events.h> 41 #include <linux/platform_data/tsl2563.h> 42 43 /* Use this many bits for fraction part. */ 44 #define ADC_FRAC_BITS 14 45 46 /* Given number of 1/10000's in ADC_FRAC_BITS precision. */ 47 #define FRAC10K(f) (((f) * (1L << (ADC_FRAC_BITS))) / (10000)) 48 49 /* Bits used for fraction in calibration coefficients.*/ 50 #define CALIB_FRAC_BITS 10 51 /* 0.5 in CALIB_FRAC_BITS precision */ 52 #define CALIB_FRAC_HALF (1 << (CALIB_FRAC_BITS - 1)) 53 /* Make a fraction from a number n that was multiplied with b. */ 54 #define CALIB_FRAC(n, b) (((n) << CALIB_FRAC_BITS) / (b)) 55 /* Decimal 10^(digits in sysfs presentation) */ 56 #define CALIB_BASE_SYSFS 1000 57 58 #define TSL2563_CMD 0x80 59 #define TSL2563_CLEARINT 0x40 60 61 #define TSL2563_REG_CTRL 0x00 62 #define TSL2563_REG_TIMING 0x01 63 #define TSL2563_REG_LOWLOW 0x02 /* data0 low threshold, 2 bytes */ 64 #define TSL2563_REG_LOWHIGH 0x03 65 #define TSL2563_REG_HIGHLOW 0x04 /* data0 high threshold, 2 bytes */ 66 #define TSL2563_REG_HIGHHIGH 0x05 67 #define TSL2563_REG_INT 0x06 68 #define TSL2563_REG_ID 0x0a 69 #define TSL2563_REG_DATA0LOW 0x0c /* broadband sensor value, 2 bytes */ 70 #define TSL2563_REG_DATA0HIGH 0x0d 71 #define TSL2563_REG_DATA1LOW 0x0e /* infrared sensor value, 2 bytes */ 72 #define TSL2563_REG_DATA1HIGH 0x0f 73 74 #define TSL2563_CMD_POWER_ON 0x03 75 #define TSL2563_CMD_POWER_OFF 0x00 76 #define TSL2563_CTRL_POWER_MASK 0x03 77 78 #define TSL2563_TIMING_13MS 0x00 79 #define TSL2563_TIMING_100MS 0x01 80 #define TSL2563_TIMING_400MS 0x02 81 #define TSL2563_TIMING_MASK 0x03 82 #define TSL2563_TIMING_GAIN16 0x10 83 #define TSL2563_TIMING_GAIN1 0x00 84 85 #define TSL2563_INT_DISBLED 0x00 86 #define TSL2563_INT_LEVEL 0x10 87 #define TSL2563_INT_PERSIST(n) ((n) & 0x0F) 88 89 struct tsl2563_gainlevel_coeff { 90 u8 gaintime; 91 u16 min; 92 u16 max; 93 }; 94 95 static const struct tsl2563_gainlevel_coeff tsl2563_gainlevel_table[] = { 96 { 97 .gaintime = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN16, 98 .min = 0, 99 .max = 65534, 100 }, { 101 .gaintime = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN1, 102 .min = 2048, 103 .max = 65534, 104 }, { 105 .gaintime = TSL2563_TIMING_100MS | TSL2563_TIMING_GAIN1, 106 .min = 4095, 107 .max = 37177, 108 }, { 109 .gaintime = TSL2563_TIMING_13MS | TSL2563_TIMING_GAIN1, 110 .min = 3000, 111 .max = 65535, 112 }, 113 }; 114 115 struct tsl2563_chip { 116 struct mutex lock; 117 struct i2c_client *client; 118 struct delayed_work poweroff_work; 119 120 /* Remember state for suspend and resume functions */ 121 bool suspended; 122 123 struct tsl2563_gainlevel_coeff const *gainlevel; 124 125 u16 low_thres; 126 u16 high_thres; 127 u8 intr; 128 bool int_enabled; 129 130 /* Calibration coefficients */ 131 u32 calib0; 132 u32 calib1; 133 int cover_comp_gain; 134 135 /* Cache current values, to be returned while suspended */ 136 u32 data0; 137 u32 data1; 138 }; 139 140 static int tsl2563_set_power(struct tsl2563_chip *chip, int on) 141 { 142 struct i2c_client *client = chip->client; 143 u8 cmd; 144 145 cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF; 146 return i2c_smbus_write_byte_data(client, 147 TSL2563_CMD | TSL2563_REG_CTRL, cmd); 148 } 149 150 /* 151 * Return value is 0 for off, 1 for on, or a negative error 152 * code if reading failed. 153 */ 154 static int tsl2563_get_power(struct tsl2563_chip *chip) 155 { 156 struct i2c_client *client = chip->client; 157 int ret; 158 159 ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_CTRL); 160 if (ret < 0) 161 return ret; 162 163 return (ret & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON; 164 } 165 166 static int tsl2563_configure(struct tsl2563_chip *chip) 167 { 168 int ret; 169 170 ret = i2c_smbus_write_byte_data(chip->client, 171 TSL2563_CMD | TSL2563_REG_TIMING, 172 chip->gainlevel->gaintime); 173 if (ret) 174 goto error_ret; 175 ret = i2c_smbus_write_byte_data(chip->client, 176 TSL2563_CMD | TSL2563_REG_HIGHLOW, 177 chip->high_thres & 0xFF); 178 if (ret) 179 goto error_ret; 180 ret = i2c_smbus_write_byte_data(chip->client, 181 TSL2563_CMD | TSL2563_REG_HIGHHIGH, 182 (chip->high_thres >> 8) & 0xFF); 183 if (ret) 184 goto error_ret; 185 ret = i2c_smbus_write_byte_data(chip->client, 186 TSL2563_CMD | TSL2563_REG_LOWLOW, 187 chip->low_thres & 0xFF); 188 if (ret) 189 goto error_ret; 190 ret = i2c_smbus_write_byte_data(chip->client, 191 TSL2563_CMD | TSL2563_REG_LOWHIGH, 192 (chip->low_thres >> 8) & 0xFF); 193 /* 194 * Interrupt register is automatically written anyway if it is relevant 195 * so is not here. 196 */ 197 error_ret: 198 return ret; 199 } 200 201 static void tsl2563_poweroff_work(struct work_struct *work) 202 { 203 struct tsl2563_chip *chip = 204 container_of(work, struct tsl2563_chip, poweroff_work.work); 205 tsl2563_set_power(chip, 0); 206 } 207 208 static int tsl2563_detect(struct tsl2563_chip *chip) 209 { 210 int ret; 211 212 ret = tsl2563_set_power(chip, 1); 213 if (ret) 214 return ret; 215 216 ret = tsl2563_get_power(chip); 217 if (ret < 0) 218 return ret; 219 220 return ret ? 0 : -ENODEV; 221 } 222 223 static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id) 224 { 225 struct i2c_client *client = chip->client; 226 int ret; 227 228 ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_ID); 229 if (ret < 0) 230 return ret; 231 232 *id = ret; 233 234 return 0; 235 } 236 237 /* 238 * "Normalized" ADC value is one obtained with 400ms of integration time and 239 * 16x gain. This function returns the number of bits of shift needed to 240 * convert between normalized values and HW values obtained using given 241 * timing and gain settings. 242 */ 243 static int tsl2563_adc_shiftbits(u8 timing) 244 { 245 int shift = 0; 246 247 switch (timing & TSL2563_TIMING_MASK) { 248 case TSL2563_TIMING_13MS: 249 shift += 5; 250 break; 251 case TSL2563_TIMING_100MS: 252 shift += 2; 253 break; 254 case TSL2563_TIMING_400MS: 255 /* no-op */ 256 break; 257 } 258 259 if (!(timing & TSL2563_TIMING_GAIN16)) 260 shift += 4; 261 262 return shift; 263 } 264 265 /* Convert a HW ADC value to normalized scale. */ 266 static u32 tsl2563_normalize_adc(u16 adc, u8 timing) 267 { 268 return adc << tsl2563_adc_shiftbits(timing); 269 } 270 271 static void tsl2563_wait_adc(struct tsl2563_chip *chip) 272 { 273 unsigned int delay; 274 275 switch (chip->gainlevel->gaintime & TSL2563_TIMING_MASK) { 276 case TSL2563_TIMING_13MS: 277 delay = 14; 278 break; 279 case TSL2563_TIMING_100MS: 280 delay = 101; 281 break; 282 default: 283 delay = 402; 284 } 285 /* 286 * TODO: Make sure that we wait at least required delay but why we 287 * have to extend it one tick more? 288 */ 289 schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2); 290 } 291 292 static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc) 293 { 294 struct i2c_client *client = chip->client; 295 296 if (adc > chip->gainlevel->max || adc < chip->gainlevel->min) { 297 298 (adc > chip->gainlevel->max) ? 299 chip->gainlevel++ : chip->gainlevel--; 300 301 i2c_smbus_write_byte_data(client, 302 TSL2563_CMD | TSL2563_REG_TIMING, 303 chip->gainlevel->gaintime); 304 305 tsl2563_wait_adc(chip); 306 tsl2563_wait_adc(chip); 307 308 return 1; 309 } else 310 return 0; 311 } 312 313 static int tsl2563_get_adc(struct tsl2563_chip *chip) 314 { 315 struct i2c_client *client = chip->client; 316 u16 adc0, adc1; 317 int retry = 1; 318 int ret = 0; 319 320 if (chip->suspended) 321 goto out; 322 323 if (!chip->int_enabled) { 324 cancel_delayed_work(&chip->poweroff_work); 325 326 if (!tsl2563_get_power(chip)) { 327 ret = tsl2563_set_power(chip, 1); 328 if (ret) 329 goto out; 330 ret = tsl2563_configure(chip); 331 if (ret) 332 goto out; 333 tsl2563_wait_adc(chip); 334 } 335 } 336 337 while (retry) { 338 ret = i2c_smbus_read_word_data(client, 339 TSL2563_CMD | TSL2563_REG_DATA0LOW); 340 if (ret < 0) 341 goto out; 342 adc0 = ret; 343 344 ret = i2c_smbus_read_word_data(client, 345 TSL2563_CMD | TSL2563_REG_DATA1LOW); 346 if (ret < 0) 347 goto out; 348 adc1 = ret; 349 350 retry = tsl2563_adjust_gainlevel(chip, adc0); 351 } 352 353 chip->data0 = tsl2563_normalize_adc(adc0, chip->gainlevel->gaintime); 354 chip->data1 = tsl2563_normalize_adc(adc1, chip->gainlevel->gaintime); 355 356 if (!chip->int_enabled) 357 schedule_delayed_work(&chip->poweroff_work, 5 * HZ); 358 359 ret = 0; 360 out: 361 return ret; 362 } 363 364 static inline int tsl2563_calib_to_sysfs(u32 calib) 365 { 366 return (int) (((calib * CALIB_BASE_SYSFS) + 367 CALIB_FRAC_HALF) >> CALIB_FRAC_BITS); 368 } 369 370 static inline u32 tsl2563_calib_from_sysfs(int value) 371 { 372 return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS; 373 } 374 375 /* 376 * Conversions between lux and ADC values. 377 * 378 * The basic formula is lux = c0 * adc0 - c1 * adc1, where c0 and c1 are 379 * appropriate constants. Different constants are needed for different 380 * kinds of light, determined by the ratio adc1/adc0 (basically the ratio 381 * of the intensities in infrared and visible wavelengths). lux_table below 382 * lists the upper threshold of the adc1/adc0 ratio and the corresponding 383 * constants. 384 */ 385 386 struct tsl2563_lux_coeff { 387 unsigned long ch_ratio; 388 unsigned long ch0_coeff; 389 unsigned long ch1_coeff; 390 }; 391 392 static const struct tsl2563_lux_coeff lux_table[] = { 393 { 394 .ch_ratio = FRAC10K(1300), 395 .ch0_coeff = FRAC10K(315), 396 .ch1_coeff = FRAC10K(262), 397 }, { 398 .ch_ratio = FRAC10K(2600), 399 .ch0_coeff = FRAC10K(337), 400 .ch1_coeff = FRAC10K(430), 401 }, { 402 .ch_ratio = FRAC10K(3900), 403 .ch0_coeff = FRAC10K(363), 404 .ch1_coeff = FRAC10K(529), 405 }, { 406 .ch_ratio = FRAC10K(5200), 407 .ch0_coeff = FRAC10K(392), 408 .ch1_coeff = FRAC10K(605), 409 }, { 410 .ch_ratio = FRAC10K(6500), 411 .ch0_coeff = FRAC10K(229), 412 .ch1_coeff = FRAC10K(291), 413 }, { 414 .ch_ratio = FRAC10K(8000), 415 .ch0_coeff = FRAC10K(157), 416 .ch1_coeff = FRAC10K(180), 417 }, { 418 .ch_ratio = FRAC10K(13000), 419 .ch0_coeff = FRAC10K(34), 420 .ch1_coeff = FRAC10K(26), 421 }, { 422 .ch_ratio = ULONG_MAX, 423 .ch0_coeff = 0, 424 .ch1_coeff = 0, 425 }, 426 }; 427 428 /* Convert normalized, scaled ADC values to lux. */ 429 static unsigned int tsl2563_adc_to_lux(u32 adc0, u32 adc1) 430 { 431 const struct tsl2563_lux_coeff *lp = lux_table; 432 unsigned long ratio, lux, ch0 = adc0, ch1 = adc1; 433 434 ratio = ch0 ? ((ch1 << ADC_FRAC_BITS) / ch0) : ULONG_MAX; 435 436 while (lp->ch_ratio < ratio) 437 lp++; 438 439 lux = ch0 * lp->ch0_coeff - ch1 * lp->ch1_coeff; 440 441 return (unsigned int) (lux >> ADC_FRAC_BITS); 442 } 443 444 /* Apply calibration coefficient to ADC count. */ 445 static u32 tsl2563_calib_adc(u32 adc, u32 calib) 446 { 447 unsigned long scaled = adc; 448 449 scaled *= calib; 450 scaled >>= CALIB_FRAC_BITS; 451 452 return (u32) scaled; 453 } 454 455 static int tsl2563_write_raw(struct iio_dev *indio_dev, 456 struct iio_chan_spec const *chan, 457 int val, 458 int val2, 459 long mask) 460 { 461 struct tsl2563_chip *chip = iio_priv(indio_dev); 462 463 if (mask != IIO_CHAN_INFO_CALIBSCALE) 464 return -EINVAL; 465 if (chan->channel2 == IIO_MOD_LIGHT_BOTH) 466 chip->calib0 = tsl2563_calib_from_sysfs(val); 467 else if (chan->channel2 == IIO_MOD_LIGHT_IR) 468 chip->calib1 = tsl2563_calib_from_sysfs(val); 469 else 470 return -EINVAL; 471 472 return 0; 473 } 474 475 static int tsl2563_read_raw(struct iio_dev *indio_dev, 476 struct iio_chan_spec const *chan, 477 int *val, 478 int *val2, 479 long mask) 480 { 481 int ret = -EINVAL; 482 u32 calib0, calib1; 483 struct tsl2563_chip *chip = iio_priv(indio_dev); 484 485 mutex_lock(&chip->lock); 486 switch (mask) { 487 case IIO_CHAN_INFO_RAW: 488 case IIO_CHAN_INFO_PROCESSED: 489 switch (chan->type) { 490 case IIO_LIGHT: 491 ret = tsl2563_get_adc(chip); 492 if (ret) 493 goto error_ret; 494 calib0 = tsl2563_calib_adc(chip->data0, chip->calib0) * 495 chip->cover_comp_gain; 496 calib1 = tsl2563_calib_adc(chip->data1, chip->calib1) * 497 chip->cover_comp_gain; 498 *val = tsl2563_adc_to_lux(calib0, calib1); 499 ret = IIO_VAL_INT; 500 break; 501 case IIO_INTENSITY: 502 ret = tsl2563_get_adc(chip); 503 if (ret) 504 goto error_ret; 505 if (chan->channel2 == IIO_MOD_LIGHT_BOTH) 506 *val = chip->data0; 507 else 508 *val = chip->data1; 509 ret = IIO_VAL_INT; 510 break; 511 default: 512 break; 513 } 514 break; 515 516 case IIO_CHAN_INFO_CALIBSCALE: 517 if (chan->channel2 == IIO_MOD_LIGHT_BOTH) 518 *val = tsl2563_calib_to_sysfs(chip->calib0); 519 else 520 *val = tsl2563_calib_to_sysfs(chip->calib1); 521 ret = IIO_VAL_INT; 522 break; 523 default: 524 ret = -EINVAL; 525 goto error_ret; 526 } 527 528 error_ret: 529 mutex_unlock(&chip->lock); 530 return ret; 531 } 532 533 static const struct iio_event_spec tsl2563_events[] = { 534 { 535 .type = IIO_EV_TYPE_THRESH, 536 .dir = IIO_EV_DIR_RISING, 537 .mask_separate = BIT(IIO_EV_INFO_VALUE) | 538 BIT(IIO_EV_INFO_ENABLE), 539 }, { 540 .type = IIO_EV_TYPE_THRESH, 541 .dir = IIO_EV_DIR_FALLING, 542 .mask_separate = BIT(IIO_EV_INFO_VALUE) | 543 BIT(IIO_EV_INFO_ENABLE), 544 }, 545 }; 546 547 static const struct iio_chan_spec tsl2563_channels[] = { 548 { 549 .type = IIO_LIGHT, 550 .indexed = 1, 551 .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), 552 .channel = 0, 553 }, { 554 .type = IIO_INTENSITY, 555 .modified = 1, 556 .channel2 = IIO_MOD_LIGHT_BOTH, 557 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 558 BIT(IIO_CHAN_INFO_CALIBSCALE), 559 .event_spec = tsl2563_events, 560 .num_event_specs = ARRAY_SIZE(tsl2563_events), 561 }, { 562 .type = IIO_INTENSITY, 563 .modified = 1, 564 .channel2 = IIO_MOD_LIGHT_IR, 565 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 566 BIT(IIO_CHAN_INFO_CALIBSCALE), 567 } 568 }; 569 570 static int tsl2563_read_thresh(struct iio_dev *indio_dev, 571 const struct iio_chan_spec *chan, enum iio_event_type type, 572 enum iio_event_direction dir, enum iio_event_info info, int *val, 573 int *val2) 574 { 575 struct tsl2563_chip *chip = iio_priv(indio_dev); 576 577 switch (dir) { 578 case IIO_EV_DIR_RISING: 579 *val = chip->high_thres; 580 break; 581 case IIO_EV_DIR_FALLING: 582 *val = chip->low_thres; 583 break; 584 default: 585 return -EINVAL; 586 } 587 588 return IIO_VAL_INT; 589 } 590 591 static int tsl2563_write_thresh(struct iio_dev *indio_dev, 592 const struct iio_chan_spec *chan, enum iio_event_type type, 593 enum iio_event_direction dir, enum iio_event_info info, int val, 594 int val2) 595 { 596 struct tsl2563_chip *chip = iio_priv(indio_dev); 597 int ret; 598 u8 address; 599 600 if (dir == IIO_EV_DIR_RISING) 601 address = TSL2563_REG_HIGHLOW; 602 else 603 address = TSL2563_REG_LOWLOW; 604 mutex_lock(&chip->lock); 605 ret = i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | address, 606 val & 0xFF); 607 if (ret) 608 goto error_ret; 609 ret = i2c_smbus_write_byte_data(chip->client, 610 TSL2563_CMD | (address + 1), 611 (val >> 8) & 0xFF); 612 if (dir == IIO_EV_DIR_RISING) 613 chip->high_thres = val; 614 else 615 chip->low_thres = val; 616 617 error_ret: 618 mutex_unlock(&chip->lock); 619 620 return ret; 621 } 622 623 static irqreturn_t tsl2563_event_handler(int irq, void *private) 624 { 625 struct iio_dev *dev_info = private; 626 struct tsl2563_chip *chip = iio_priv(dev_info); 627 628 iio_push_event(dev_info, 629 IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 630 0, 631 IIO_EV_TYPE_THRESH, 632 IIO_EV_DIR_EITHER), 633 iio_get_time_ns()); 634 635 /* clear the interrupt and push the event */ 636 i2c_smbus_write_byte(chip->client, TSL2563_CMD | TSL2563_CLEARINT); 637 return IRQ_HANDLED; 638 } 639 640 static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev, 641 const struct iio_chan_spec *chan, enum iio_event_type type, 642 enum iio_event_direction dir, int state) 643 { 644 struct tsl2563_chip *chip = iio_priv(indio_dev); 645 int ret = 0; 646 647 mutex_lock(&chip->lock); 648 if (state && !(chip->intr & 0x30)) { 649 chip->intr &= ~0x30; 650 chip->intr |= 0x10; 651 /* ensure the chip is actually on */ 652 cancel_delayed_work(&chip->poweroff_work); 653 if (!tsl2563_get_power(chip)) { 654 ret = tsl2563_set_power(chip, 1); 655 if (ret) 656 goto out; 657 ret = tsl2563_configure(chip); 658 if (ret) 659 goto out; 660 } 661 ret = i2c_smbus_write_byte_data(chip->client, 662 TSL2563_CMD | TSL2563_REG_INT, 663 chip->intr); 664 chip->int_enabled = true; 665 } 666 667 if (!state && (chip->intr & 0x30)) { 668 chip->intr &= ~0x30; 669 ret = i2c_smbus_write_byte_data(chip->client, 670 TSL2563_CMD | TSL2563_REG_INT, 671 chip->intr); 672 chip->int_enabled = false; 673 /* now the interrupt is not enabled, we can go to sleep */ 674 schedule_delayed_work(&chip->poweroff_work, 5 * HZ); 675 } 676 out: 677 mutex_unlock(&chip->lock); 678 679 return ret; 680 } 681 682 static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev, 683 const struct iio_chan_spec *chan, enum iio_event_type type, 684 enum iio_event_direction dir) 685 { 686 struct tsl2563_chip *chip = iio_priv(indio_dev); 687 int ret; 688 689 mutex_lock(&chip->lock); 690 ret = i2c_smbus_read_byte_data(chip->client, 691 TSL2563_CMD | TSL2563_REG_INT); 692 mutex_unlock(&chip->lock); 693 if (ret < 0) 694 return ret; 695 696 return !!(ret & 0x30); 697 } 698 699 static const struct iio_info tsl2563_info_no_irq = { 700 .driver_module = THIS_MODULE, 701 .read_raw = &tsl2563_read_raw, 702 .write_raw = &tsl2563_write_raw, 703 }; 704 705 static const struct iio_info tsl2563_info = { 706 .driver_module = THIS_MODULE, 707 .read_raw = &tsl2563_read_raw, 708 .write_raw = &tsl2563_write_raw, 709 .read_event_value = &tsl2563_read_thresh, 710 .write_event_value = &tsl2563_write_thresh, 711 .read_event_config = &tsl2563_read_interrupt_config, 712 .write_event_config = &tsl2563_write_interrupt_config, 713 }; 714 715 static int tsl2563_probe(struct i2c_client *client, 716 const struct i2c_device_id *device_id) 717 { 718 struct iio_dev *indio_dev; 719 struct tsl2563_chip *chip; 720 struct tsl2563_platform_data *pdata = client->dev.platform_data; 721 struct device_node *np = client->dev.of_node; 722 int err = 0; 723 u8 id = 0; 724 725 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); 726 if (!indio_dev) 727 return -ENOMEM; 728 729 chip = iio_priv(indio_dev); 730 731 i2c_set_clientdata(client, chip); 732 chip->client = client; 733 734 err = tsl2563_detect(chip); 735 if (err) { 736 dev_err(&client->dev, "detect error %d\n", -err); 737 return err; 738 } 739 740 err = tsl2563_read_id(chip, &id); 741 if (err) { 742 dev_err(&client->dev, "read id error %d\n", -err); 743 return err; 744 } 745 746 mutex_init(&chip->lock); 747 748 /* Default values used until userspace says otherwise */ 749 chip->low_thres = 0x0; 750 chip->high_thres = 0xffff; 751 chip->gainlevel = tsl2563_gainlevel_table; 752 chip->intr = TSL2563_INT_PERSIST(4); 753 chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS); 754 chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS); 755 756 if (pdata) 757 chip->cover_comp_gain = pdata->cover_comp_gain; 758 else if (np) 759 of_property_read_u32(np, "amstaos,cover-comp-gain", 760 &chip->cover_comp_gain); 761 else 762 chip->cover_comp_gain = 1; 763 764 dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f); 765 indio_dev->name = client->name; 766 indio_dev->channels = tsl2563_channels; 767 indio_dev->num_channels = ARRAY_SIZE(tsl2563_channels); 768 indio_dev->dev.parent = &client->dev; 769 indio_dev->modes = INDIO_DIRECT_MODE; 770 771 if (client->irq) 772 indio_dev->info = &tsl2563_info; 773 else 774 indio_dev->info = &tsl2563_info_no_irq; 775 776 if (client->irq) { 777 err = devm_request_threaded_irq(&client->dev, client->irq, 778 NULL, 779 &tsl2563_event_handler, 780 IRQF_TRIGGER_RISING | IRQF_ONESHOT, 781 "tsl2563_event", 782 indio_dev); 783 if (err) { 784 dev_err(&client->dev, "irq request error %d\n", -err); 785 return err; 786 } 787 } 788 789 err = tsl2563_configure(chip); 790 if (err) { 791 dev_err(&client->dev, "configure error %d\n", -err); 792 return err; 793 } 794 795 INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work); 796 797 /* The interrupt cannot yet be enabled so this is fine without lock */ 798 schedule_delayed_work(&chip->poweroff_work, 5 * HZ); 799 800 err = iio_device_register(indio_dev); 801 if (err) { 802 dev_err(&client->dev, "iio registration error %d\n", -err); 803 goto fail; 804 } 805 806 return 0; 807 808 fail: 809 cancel_delayed_work(&chip->poweroff_work); 810 flush_scheduled_work(); 811 return err; 812 } 813 814 static int tsl2563_remove(struct i2c_client *client) 815 { 816 struct tsl2563_chip *chip = i2c_get_clientdata(client); 817 struct iio_dev *indio_dev = iio_priv_to_dev(chip); 818 819 iio_device_unregister(indio_dev); 820 if (!chip->int_enabled) 821 cancel_delayed_work(&chip->poweroff_work); 822 /* Ensure that interrupts are disabled - then flush any bottom halves */ 823 chip->intr &= ~0x30; 824 i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | TSL2563_REG_INT, 825 chip->intr); 826 flush_scheduled_work(); 827 tsl2563_set_power(chip, 0); 828 829 return 0; 830 } 831 832 #ifdef CONFIG_PM_SLEEP 833 static int tsl2563_suspend(struct device *dev) 834 { 835 struct tsl2563_chip *chip = i2c_get_clientdata(to_i2c_client(dev)); 836 int ret; 837 838 mutex_lock(&chip->lock); 839 840 ret = tsl2563_set_power(chip, 0); 841 if (ret) 842 goto out; 843 844 chip->suspended = true; 845 846 out: 847 mutex_unlock(&chip->lock); 848 return ret; 849 } 850 851 static int tsl2563_resume(struct device *dev) 852 { 853 struct tsl2563_chip *chip = i2c_get_clientdata(to_i2c_client(dev)); 854 int ret; 855 856 mutex_lock(&chip->lock); 857 858 ret = tsl2563_set_power(chip, 1); 859 if (ret) 860 goto out; 861 862 ret = tsl2563_configure(chip); 863 if (ret) 864 goto out; 865 866 chip->suspended = false; 867 868 out: 869 mutex_unlock(&chip->lock); 870 return ret; 871 } 872 873 static SIMPLE_DEV_PM_OPS(tsl2563_pm_ops, tsl2563_suspend, tsl2563_resume); 874 #define TSL2563_PM_OPS (&tsl2563_pm_ops) 875 #else 876 #define TSL2563_PM_OPS NULL 877 #endif 878 879 static const struct i2c_device_id tsl2563_id[] = { 880 { "tsl2560", 0 }, 881 { "tsl2561", 1 }, 882 { "tsl2562", 2 }, 883 { "tsl2563", 3 }, 884 {} 885 }; 886 MODULE_DEVICE_TABLE(i2c, tsl2563_id); 887 888 static struct i2c_driver tsl2563_i2c_driver = { 889 .driver = { 890 .name = "tsl2563", 891 .pm = TSL2563_PM_OPS, 892 }, 893 .probe = tsl2563_probe, 894 .remove = tsl2563_remove, 895 .id_table = tsl2563_id, 896 }; 897 module_i2c_driver(tsl2563_i2c_driver); 898 899 MODULE_AUTHOR("Nokia Corporation"); 900 MODULE_DESCRIPTION("tsl2563 light sensor driver"); 901 MODULE_LICENSE("GPL"); 902