xref: /openbmc/linux/drivers/iio/light/gp2ap020a00f.c (revision 5497b23e)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
4  * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
5  *
6  * IIO features supported by the driver:
7  *
8  * Read-only raw channels:
9  *   - illuminance_clear [lux]
10  *   - illuminance_ir
11  *   - proximity
12  *
13  * Triggered buffer:
14  *   - illuminance_clear
15  *   - illuminance_ir
16  *   - proximity
17  *
18  * Events:
19  *   - illuminance_clear (rising and falling)
20  *   - proximity (rising and falling)
21  *     - both falling and rising thresholds for the proximity events
22  *       must be set to the values greater than 0.
23  *
24  * The driver supports triggered buffers for all the three
25  * channels as well as high and low threshold events for the
26  * illuminance_clear and proxmimity channels. Triggers
27  * can be enabled simultaneously with both illuminance_clear
28  * events. Proximity events cannot be enabled simultaneously
29  * with any triggers or illuminance events. Enabling/disabling
30  * one of the proximity events automatically enables/disables
31  * the other one.
32  */
33 
34 #include <linux/debugfs.h>
35 #include <linux/delay.h>
36 #include <linux/i2c.h>
37 #include <linux/interrupt.h>
38 #include <linux/irq.h>
39 #include <linux/irq_work.h>
40 #include <linux/module.h>
41 #include <linux/mod_devicetable.h>
42 #include <linux/mutex.h>
43 #include <linux/regmap.h>
44 #include <linux/regulator/consumer.h>
45 #include <linux/slab.h>
46 #include <asm/unaligned.h>
47 #include <linux/iio/buffer.h>
48 #include <linux/iio/events.h>
49 #include <linux/iio/iio.h>
50 #include <linux/iio/sysfs.h>
51 #include <linux/iio/trigger.h>
52 #include <linux/iio/trigger_consumer.h>
53 #include <linux/iio/triggered_buffer.h>
54 
55 #define GP2A_I2C_NAME "gp2ap020a00f"
56 
57 /* Registers */
58 #define GP2AP020A00F_OP_REG	0x00 /* Basic operations */
59 #define GP2AP020A00F_ALS_REG	0x01 /* ALS related settings */
60 #define GP2AP020A00F_PS_REG	0x02 /* PS related settings */
61 #define GP2AP020A00F_LED_REG	0x03 /* LED reg */
62 #define GP2AP020A00F_TL_L_REG	0x04 /* ALS: Threshold low LSB */
63 #define GP2AP020A00F_TL_H_REG	0x05 /* ALS: Threshold low MSB */
64 #define GP2AP020A00F_TH_L_REG	0x06 /* ALS: Threshold high LSB */
65 #define GP2AP020A00F_TH_H_REG	0x07 /* ALS: Threshold high MSB */
66 #define GP2AP020A00F_PL_L_REG	0x08 /* PS: Threshold low LSB */
67 #define GP2AP020A00F_PL_H_REG	0x09 /* PS: Threshold low MSB */
68 #define GP2AP020A00F_PH_L_REG	0x0a /* PS: Threshold high LSB */
69 #define GP2AP020A00F_PH_H_REG	0x0b /* PS: Threshold high MSB */
70 #define GP2AP020A00F_D0_L_REG	0x0c /* ALS result: Clear/Illuminance LSB */
71 #define GP2AP020A00F_D0_H_REG	0x0d /* ALS result: Clear/Illuminance MSB */
72 #define GP2AP020A00F_D1_L_REG	0x0e /* ALS result: IR LSB */
73 #define GP2AP020A00F_D1_H_REG	0x0f /* ALS result: IR LSB */
74 #define GP2AP020A00F_D2_L_REG	0x10 /* PS result LSB */
75 #define GP2AP020A00F_D2_H_REG	0x11 /* PS result MSB */
76 #define GP2AP020A00F_NUM_REGS	0x12 /* Number of registers */
77 
78 /* OP_REG bits */
79 #define GP2AP020A00F_OP3_MASK		0x80 /* Software shutdown */
80 #define GP2AP020A00F_OP3_SHUTDOWN	0x00
81 #define GP2AP020A00F_OP3_OPERATION	0x80
82 #define GP2AP020A00F_OP2_MASK		0x40 /* Auto shutdown/Continuous mode */
83 #define GP2AP020A00F_OP2_AUTO_SHUTDOWN	0x00
84 #define GP2AP020A00F_OP2_CONT_OPERATION	0x40
85 #define GP2AP020A00F_OP_MASK		0x30 /* Operating mode selection  */
86 #define GP2AP020A00F_OP_ALS_AND_PS	0x00
87 #define GP2AP020A00F_OP_ALS		0x10
88 #define GP2AP020A00F_OP_PS		0x20
89 #define GP2AP020A00F_OP_DEBUG		0x30
90 #define GP2AP020A00F_PROX_MASK		0x08 /* PS: detection/non-detection */
91 #define GP2AP020A00F_PROX_NON_DETECT	0x00
92 #define GP2AP020A00F_PROX_DETECT	0x08
93 #define GP2AP020A00F_FLAG_P		0x04 /* PS: interrupt result  */
94 #define GP2AP020A00F_FLAG_A		0x02 /* ALS: interrupt result  */
95 #define GP2AP020A00F_TYPE_MASK		0x01 /* Output data type selection */
96 #define GP2AP020A00F_TYPE_MANUAL_CALC	0x00
97 #define GP2AP020A00F_TYPE_AUTO_CALC	0x01
98 
99 /* ALS_REG bits */
100 #define GP2AP020A00F_PRST_MASK		0xc0 /* Number of measurement cycles */
101 #define GP2AP020A00F_PRST_ONCE		0x00
102 #define GP2AP020A00F_PRST_4_CYCLES	0x40
103 #define GP2AP020A00F_PRST_8_CYCLES	0x80
104 #define GP2AP020A00F_PRST_16_CYCLES	0xc0
105 #define GP2AP020A00F_RES_A_MASK		0x38 /* ALS: Resolution */
106 #define GP2AP020A00F_RES_A_800ms	0x00
107 #define GP2AP020A00F_RES_A_400ms	0x08
108 #define GP2AP020A00F_RES_A_200ms	0x10
109 #define GP2AP020A00F_RES_A_100ms	0x18
110 #define GP2AP020A00F_RES_A_25ms		0x20
111 #define GP2AP020A00F_RES_A_6_25ms	0x28
112 #define GP2AP020A00F_RES_A_1_56ms	0x30
113 #define GP2AP020A00F_RES_A_0_39ms	0x38
114 #define GP2AP020A00F_RANGE_A_MASK	0x07 /* ALS: Max measurable range */
115 #define GP2AP020A00F_RANGE_A_x1		0x00
116 #define GP2AP020A00F_RANGE_A_x2		0x01
117 #define GP2AP020A00F_RANGE_A_x4		0x02
118 #define GP2AP020A00F_RANGE_A_x8		0x03
119 #define GP2AP020A00F_RANGE_A_x16	0x04
120 #define GP2AP020A00F_RANGE_A_x32	0x05
121 #define GP2AP020A00F_RANGE_A_x64	0x06
122 #define GP2AP020A00F_RANGE_A_x128	0x07
123 
124 /* PS_REG bits */
125 #define GP2AP020A00F_ALC_MASK		0x80 /* Auto light cancel */
126 #define GP2AP020A00F_ALC_ON		0x80
127 #define GP2AP020A00F_ALC_OFF		0x00
128 #define GP2AP020A00F_INTTYPE_MASK	0x40 /* Interrupt type setting */
129 #define GP2AP020A00F_INTTYPE_LEVEL	0x00
130 #define GP2AP020A00F_INTTYPE_PULSE	0x40
131 #define GP2AP020A00F_RES_P_MASK		0x38 /* PS: Resolution */
132 #define GP2AP020A00F_RES_P_800ms_x2	0x00
133 #define GP2AP020A00F_RES_P_400ms_x2	0x08
134 #define GP2AP020A00F_RES_P_200ms_x2	0x10
135 #define GP2AP020A00F_RES_P_100ms_x2	0x18
136 #define GP2AP020A00F_RES_P_25ms_x2	0x20
137 #define GP2AP020A00F_RES_P_6_25ms_x2	0x28
138 #define GP2AP020A00F_RES_P_1_56ms_x2	0x30
139 #define GP2AP020A00F_RES_P_0_39ms_x2	0x38
140 #define GP2AP020A00F_RANGE_P_MASK	0x07 /* PS: Max measurable range */
141 #define GP2AP020A00F_RANGE_P_x1		0x00
142 #define GP2AP020A00F_RANGE_P_x2		0x01
143 #define GP2AP020A00F_RANGE_P_x4		0x02
144 #define GP2AP020A00F_RANGE_P_x8		0x03
145 #define GP2AP020A00F_RANGE_P_x16	0x04
146 #define GP2AP020A00F_RANGE_P_x32	0x05
147 #define GP2AP020A00F_RANGE_P_x64	0x06
148 #define GP2AP020A00F_RANGE_P_x128	0x07
149 
150 /* LED reg bits */
151 #define GP2AP020A00F_INTVAL_MASK	0xc0 /* Intermittent operating */
152 #define GP2AP020A00F_INTVAL_0		0x00
153 #define GP2AP020A00F_INTVAL_4		0x40
154 #define GP2AP020A00F_INTVAL_8		0x80
155 #define GP2AP020A00F_INTVAL_16		0xc0
156 #define GP2AP020A00F_IS_MASK		0x30 /* ILED drive peak current */
157 #define GP2AP020A00F_IS_13_8mA		0x00
158 #define GP2AP020A00F_IS_27_5mA		0x10
159 #define GP2AP020A00F_IS_55mA		0x20
160 #define GP2AP020A00F_IS_110mA		0x30
161 #define GP2AP020A00F_PIN_MASK		0x0c /* INT terminal setting */
162 #define GP2AP020A00F_PIN_ALS_OR_PS	0x00
163 #define GP2AP020A00F_PIN_ALS		0x04
164 #define GP2AP020A00F_PIN_PS		0x08
165 #define GP2AP020A00F_PIN_PS_DETECT	0x0c
166 #define GP2AP020A00F_FREQ_MASK		0x02 /* LED modulation frequency */
167 #define GP2AP020A00F_FREQ_327_5kHz	0x00
168 #define GP2AP020A00F_FREQ_81_8kHz	0x02
169 #define GP2AP020A00F_RST		0x01 /* Software reset */
170 
171 #define GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR	0
172 #define GP2AP020A00F_SCAN_MODE_LIGHT_IR		1
173 #define GP2AP020A00F_SCAN_MODE_PROXIMITY	2
174 #define GP2AP020A00F_CHAN_TIMESTAMP		3
175 
176 #define GP2AP020A00F_DATA_READY_TIMEOUT		msecs_to_jiffies(1000)
177 #define GP2AP020A00F_DATA_REG(chan)		(GP2AP020A00F_D0_L_REG + \
178 							(chan) * 2)
179 #define GP2AP020A00F_THRESH_REG(th_val_id)	(GP2AP020A00F_TL_L_REG + \
180 							(th_val_id) * 2)
181 #define GP2AP020A00F_THRESH_VAL_ID(reg_addr)	((reg_addr - 4) / 2)
182 
183 #define GP2AP020A00F_SUBTRACT_MODE	0
184 #define GP2AP020A00F_ADD_MODE		1
185 
186 #define GP2AP020A00F_MAX_CHANNELS	3
187 
188 enum gp2ap020a00f_opmode {
189 	GP2AP020A00F_OPMODE_READ_RAW_CLEAR,
190 	GP2AP020A00F_OPMODE_READ_RAW_IR,
191 	GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY,
192 	GP2AP020A00F_OPMODE_ALS,
193 	GP2AP020A00F_OPMODE_PS,
194 	GP2AP020A00F_OPMODE_ALS_AND_PS,
195 	GP2AP020A00F_OPMODE_PROX_DETECT,
196 	GP2AP020A00F_OPMODE_SHUTDOWN,
197 	GP2AP020A00F_NUM_OPMODES,
198 };
199 
200 enum gp2ap020a00f_cmd {
201 	GP2AP020A00F_CMD_READ_RAW_CLEAR,
202 	GP2AP020A00F_CMD_READ_RAW_IR,
203 	GP2AP020A00F_CMD_READ_RAW_PROXIMITY,
204 	GP2AP020A00F_CMD_TRIGGER_CLEAR_EN,
205 	GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS,
206 	GP2AP020A00F_CMD_TRIGGER_IR_EN,
207 	GP2AP020A00F_CMD_TRIGGER_IR_DIS,
208 	GP2AP020A00F_CMD_TRIGGER_PROX_EN,
209 	GP2AP020A00F_CMD_TRIGGER_PROX_DIS,
210 	GP2AP020A00F_CMD_ALS_HIGH_EV_EN,
211 	GP2AP020A00F_CMD_ALS_HIGH_EV_DIS,
212 	GP2AP020A00F_CMD_ALS_LOW_EV_EN,
213 	GP2AP020A00F_CMD_ALS_LOW_EV_DIS,
214 	GP2AP020A00F_CMD_PROX_HIGH_EV_EN,
215 	GP2AP020A00F_CMD_PROX_HIGH_EV_DIS,
216 	GP2AP020A00F_CMD_PROX_LOW_EV_EN,
217 	GP2AP020A00F_CMD_PROX_LOW_EV_DIS,
218 };
219 
220 enum gp2ap020a00f_flags {
221 	GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER,
222 	GP2AP020A00F_FLAG_ALS_IR_TRIGGER,
223 	GP2AP020A00F_FLAG_PROX_TRIGGER,
224 	GP2AP020A00F_FLAG_PROX_RISING_EV,
225 	GP2AP020A00F_FLAG_PROX_FALLING_EV,
226 	GP2AP020A00F_FLAG_ALS_RISING_EV,
227 	GP2AP020A00F_FLAG_ALS_FALLING_EV,
228 	GP2AP020A00F_FLAG_LUX_MODE_HI,
229 	GP2AP020A00F_FLAG_DATA_READY,
230 };
231 
232 enum gp2ap020a00f_thresh_val_id {
233 	GP2AP020A00F_THRESH_TL,
234 	GP2AP020A00F_THRESH_TH,
235 	GP2AP020A00F_THRESH_PL,
236 	GP2AP020A00F_THRESH_PH,
237 };
238 
239 struct gp2ap020a00f_data {
240 	const struct gp2ap020a00f_platform_data *pdata;
241 	struct i2c_client *client;
242 	struct mutex lock;
243 	char *buffer;
244 	struct regulator *vled_reg;
245 	unsigned long flags;
246 	enum gp2ap020a00f_opmode cur_opmode;
247 	struct iio_trigger *trig;
248 	struct regmap *regmap;
249 	unsigned int thresh_val[4];
250 	u8 debug_reg_addr;
251 	struct irq_work work;
252 	wait_queue_head_t data_ready_queue;
253 };
254 
255 static const u8 gp2ap020a00f_reg_init_tab[] = {
256 	[GP2AP020A00F_OP_REG] = GP2AP020A00F_OP3_SHUTDOWN,
257 	[GP2AP020A00F_ALS_REG] = GP2AP020A00F_RES_A_25ms |
258 				 GP2AP020A00F_RANGE_A_x8,
259 	[GP2AP020A00F_PS_REG] = GP2AP020A00F_ALC_ON |
260 				GP2AP020A00F_RES_P_1_56ms_x2 |
261 				GP2AP020A00F_RANGE_P_x4,
262 	[GP2AP020A00F_LED_REG] = GP2AP020A00F_INTVAL_0 |
263 				 GP2AP020A00F_IS_110mA |
264 				 GP2AP020A00F_FREQ_327_5kHz,
265 	[GP2AP020A00F_TL_L_REG] = 0,
266 	[GP2AP020A00F_TL_H_REG] = 0,
267 	[GP2AP020A00F_TH_L_REG] = 0,
268 	[GP2AP020A00F_TH_H_REG] = 0,
269 	[GP2AP020A00F_PL_L_REG] = 0,
270 	[GP2AP020A00F_PL_H_REG] = 0,
271 	[GP2AP020A00F_PH_L_REG] = 0,
272 	[GP2AP020A00F_PH_H_REG] = 0,
273 };
274 
275 static bool gp2ap020a00f_is_volatile_reg(struct device *dev, unsigned int reg)
276 {
277 	switch (reg) {
278 	case GP2AP020A00F_OP_REG:
279 	case GP2AP020A00F_D0_L_REG:
280 	case GP2AP020A00F_D0_H_REG:
281 	case GP2AP020A00F_D1_L_REG:
282 	case GP2AP020A00F_D1_H_REG:
283 	case GP2AP020A00F_D2_L_REG:
284 	case GP2AP020A00F_D2_H_REG:
285 		return true;
286 	default:
287 		return false;
288 	}
289 }
290 
291 static const struct regmap_config gp2ap020a00f_regmap_config = {
292 	.reg_bits = 8,
293 	.val_bits = 8,
294 
295 	.max_register = GP2AP020A00F_D2_H_REG,
296 	.cache_type = REGCACHE_RBTREE,
297 
298 	.volatile_reg = gp2ap020a00f_is_volatile_reg,
299 };
300 
301 static const struct gp2ap020a00f_mutable_config_regs {
302 	u8 op_reg;
303 	u8 als_reg;
304 	u8 ps_reg;
305 	u8 led_reg;
306 } opmode_regs_settings[GP2AP020A00F_NUM_OPMODES] = {
307 	[GP2AP020A00F_OPMODE_READ_RAW_CLEAR] = {
308 		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
309 		| GP2AP020A00F_OP3_OPERATION
310 		| GP2AP020A00F_TYPE_AUTO_CALC,
311 		GP2AP020A00F_PRST_ONCE,
312 		GP2AP020A00F_INTTYPE_LEVEL,
313 		GP2AP020A00F_PIN_ALS
314 	},
315 	[GP2AP020A00F_OPMODE_READ_RAW_IR] = {
316 		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
317 		| GP2AP020A00F_OP3_OPERATION
318 		| GP2AP020A00F_TYPE_MANUAL_CALC,
319 		GP2AP020A00F_PRST_ONCE,
320 		GP2AP020A00F_INTTYPE_LEVEL,
321 		GP2AP020A00F_PIN_ALS
322 	},
323 	[GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY] = {
324 		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
325 		| GP2AP020A00F_OP3_OPERATION
326 		| GP2AP020A00F_TYPE_MANUAL_CALC,
327 		GP2AP020A00F_PRST_ONCE,
328 		GP2AP020A00F_INTTYPE_LEVEL,
329 		GP2AP020A00F_PIN_PS
330 	},
331 	[GP2AP020A00F_OPMODE_PROX_DETECT] = {
332 		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
333 		| GP2AP020A00F_OP3_OPERATION
334 		| GP2AP020A00F_TYPE_MANUAL_CALC,
335 		GP2AP020A00F_PRST_4_CYCLES,
336 		GP2AP020A00F_INTTYPE_PULSE,
337 		GP2AP020A00F_PIN_PS_DETECT
338 	},
339 	[GP2AP020A00F_OPMODE_ALS] = {
340 		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
341 		| GP2AP020A00F_OP3_OPERATION
342 		| GP2AP020A00F_TYPE_AUTO_CALC,
343 		GP2AP020A00F_PRST_ONCE,
344 		GP2AP020A00F_INTTYPE_LEVEL,
345 		GP2AP020A00F_PIN_ALS
346 	},
347 	[GP2AP020A00F_OPMODE_PS] = {
348 		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
349 		| GP2AP020A00F_OP3_OPERATION
350 		| GP2AP020A00F_TYPE_MANUAL_CALC,
351 		GP2AP020A00F_PRST_4_CYCLES,
352 		GP2AP020A00F_INTTYPE_LEVEL,
353 		GP2AP020A00F_PIN_PS
354 	},
355 	[GP2AP020A00F_OPMODE_ALS_AND_PS] = {
356 		GP2AP020A00F_OP_ALS_AND_PS
357 		| GP2AP020A00F_OP2_CONT_OPERATION
358 		| GP2AP020A00F_OP3_OPERATION
359 		| GP2AP020A00F_TYPE_AUTO_CALC,
360 		GP2AP020A00F_PRST_4_CYCLES,
361 		GP2AP020A00F_INTTYPE_LEVEL,
362 		GP2AP020A00F_PIN_ALS_OR_PS
363 	},
364 	[GP2AP020A00F_OPMODE_SHUTDOWN] = { GP2AP020A00F_OP3_SHUTDOWN, },
365 };
366 
367 static int gp2ap020a00f_set_operation_mode(struct gp2ap020a00f_data *data,
368 					enum gp2ap020a00f_opmode op)
369 {
370 	unsigned int op_reg_val;
371 	int err;
372 
373 	if (op != GP2AP020A00F_OPMODE_SHUTDOWN) {
374 		err = regmap_read(data->regmap, GP2AP020A00F_OP_REG,
375 					&op_reg_val);
376 		if (err < 0)
377 			return err;
378 		/*
379 		 * Shutdown the device if the operation being executed entails
380 		 * mode transition.
381 		 */
382 		if ((opmode_regs_settings[op].op_reg & GP2AP020A00F_OP_MASK) !=
383 		    (op_reg_val & GP2AP020A00F_OP_MASK)) {
384 			/* set shutdown mode */
385 			err = regmap_update_bits(data->regmap,
386 				GP2AP020A00F_OP_REG, GP2AP020A00F_OP3_MASK,
387 				GP2AP020A00F_OP3_SHUTDOWN);
388 			if (err < 0)
389 				return err;
390 		}
391 
392 		err = regmap_update_bits(data->regmap, GP2AP020A00F_ALS_REG,
393 			GP2AP020A00F_PRST_MASK, opmode_regs_settings[op]
394 								.als_reg);
395 		if (err < 0)
396 			return err;
397 
398 		err = regmap_update_bits(data->regmap, GP2AP020A00F_PS_REG,
399 			GP2AP020A00F_INTTYPE_MASK, opmode_regs_settings[op]
400 								.ps_reg);
401 		if (err < 0)
402 			return err;
403 
404 		err = regmap_update_bits(data->regmap, GP2AP020A00F_LED_REG,
405 			GP2AP020A00F_PIN_MASK, opmode_regs_settings[op]
406 								.led_reg);
407 		if (err < 0)
408 			return err;
409 	}
410 
411 	/* Set OP_REG and apply operation mode (power on / off) */
412 	err = regmap_update_bits(data->regmap,
413 				 GP2AP020A00F_OP_REG,
414 				 GP2AP020A00F_OP_MASK | GP2AP020A00F_OP2_MASK |
415 				 GP2AP020A00F_OP3_MASK | GP2AP020A00F_TYPE_MASK,
416 				 opmode_regs_settings[op].op_reg);
417 	if (err < 0)
418 		return err;
419 
420 	data->cur_opmode = op;
421 
422 	return 0;
423 }
424 
425 static bool gp2ap020a00f_als_enabled(struct gp2ap020a00f_data *data)
426 {
427 	return test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags) ||
428 	       test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags) ||
429 	       test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags) ||
430 	       test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
431 }
432 
433 static bool gp2ap020a00f_prox_detect_enabled(struct gp2ap020a00f_data *data)
434 {
435 	return test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags) ||
436 	       test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
437 }
438 
439 static int gp2ap020a00f_write_event_threshold(struct gp2ap020a00f_data *data,
440 				enum gp2ap020a00f_thresh_val_id th_val_id,
441 				bool enable)
442 {
443 	__le16 thresh_buf = 0;
444 	unsigned int thresh_reg_val;
445 
446 	if (!enable)
447 		thresh_reg_val = 0;
448 	else if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags) &&
449 		 th_val_id != GP2AP020A00F_THRESH_PL &&
450 		 th_val_id != GP2AP020A00F_THRESH_PH)
451 		/*
452 		 * For the high lux mode ALS threshold has to be scaled down
453 		 * to allow for proper comparison with the output value.
454 		 */
455 		thresh_reg_val = data->thresh_val[th_val_id] / 16;
456 	else
457 		thresh_reg_val = data->thresh_val[th_val_id] > 16000 ?
458 					16000 :
459 					data->thresh_val[th_val_id];
460 
461 	thresh_buf = cpu_to_le16(thresh_reg_val);
462 
463 	return regmap_bulk_write(data->regmap,
464 				 GP2AP020A00F_THRESH_REG(th_val_id),
465 				 (u8 *)&thresh_buf, 2);
466 }
467 
468 static int gp2ap020a00f_alter_opmode(struct gp2ap020a00f_data *data,
469 			enum gp2ap020a00f_opmode diff_mode, int add_sub)
470 {
471 	enum gp2ap020a00f_opmode new_mode;
472 
473 	if (diff_mode != GP2AP020A00F_OPMODE_ALS &&
474 	    diff_mode != GP2AP020A00F_OPMODE_PS)
475 		return -EINVAL;
476 
477 	if (add_sub == GP2AP020A00F_ADD_MODE) {
478 		if (data->cur_opmode == GP2AP020A00F_OPMODE_SHUTDOWN)
479 			new_mode =  diff_mode;
480 		else
481 			new_mode = GP2AP020A00F_OPMODE_ALS_AND_PS;
482 	} else {
483 		if (data->cur_opmode == GP2AP020A00F_OPMODE_ALS_AND_PS)
484 			new_mode = (diff_mode == GP2AP020A00F_OPMODE_ALS) ?
485 					GP2AP020A00F_OPMODE_PS :
486 					GP2AP020A00F_OPMODE_ALS;
487 		else
488 			new_mode = GP2AP020A00F_OPMODE_SHUTDOWN;
489 	}
490 
491 	return gp2ap020a00f_set_operation_mode(data, new_mode);
492 }
493 
494 static int gp2ap020a00f_exec_cmd(struct gp2ap020a00f_data *data,
495 					enum gp2ap020a00f_cmd cmd)
496 {
497 	int err = 0;
498 
499 	switch (cmd) {
500 	case GP2AP020A00F_CMD_READ_RAW_CLEAR:
501 		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
502 			return -EBUSY;
503 		err = gp2ap020a00f_set_operation_mode(data,
504 					GP2AP020A00F_OPMODE_READ_RAW_CLEAR);
505 		break;
506 	case GP2AP020A00F_CMD_READ_RAW_IR:
507 		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
508 			return -EBUSY;
509 		err = gp2ap020a00f_set_operation_mode(data,
510 					GP2AP020A00F_OPMODE_READ_RAW_IR);
511 		break;
512 	case GP2AP020A00F_CMD_READ_RAW_PROXIMITY:
513 		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
514 			return -EBUSY;
515 		err = gp2ap020a00f_set_operation_mode(data,
516 					GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY);
517 		break;
518 	case GP2AP020A00F_CMD_TRIGGER_CLEAR_EN:
519 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
520 			return -EBUSY;
521 		if (!gp2ap020a00f_als_enabled(data))
522 			err = gp2ap020a00f_alter_opmode(data,
523 						GP2AP020A00F_OPMODE_ALS,
524 						GP2AP020A00F_ADD_MODE);
525 		set_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
526 		break;
527 	case GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS:
528 		clear_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
529 		if (gp2ap020a00f_als_enabled(data))
530 			break;
531 		err = gp2ap020a00f_alter_opmode(data,
532 						GP2AP020A00F_OPMODE_ALS,
533 						GP2AP020A00F_SUBTRACT_MODE);
534 		break;
535 	case GP2AP020A00F_CMD_TRIGGER_IR_EN:
536 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
537 			return -EBUSY;
538 		if (!gp2ap020a00f_als_enabled(data))
539 			err = gp2ap020a00f_alter_opmode(data,
540 						GP2AP020A00F_OPMODE_ALS,
541 						GP2AP020A00F_ADD_MODE);
542 		set_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
543 		break;
544 	case GP2AP020A00F_CMD_TRIGGER_IR_DIS:
545 		clear_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
546 		if (gp2ap020a00f_als_enabled(data))
547 			break;
548 		err = gp2ap020a00f_alter_opmode(data,
549 						GP2AP020A00F_OPMODE_ALS,
550 						GP2AP020A00F_SUBTRACT_MODE);
551 		break;
552 	case GP2AP020A00F_CMD_TRIGGER_PROX_EN:
553 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
554 			return -EBUSY;
555 		err = gp2ap020a00f_alter_opmode(data,
556 						GP2AP020A00F_OPMODE_PS,
557 						GP2AP020A00F_ADD_MODE);
558 		set_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
559 		break;
560 	case GP2AP020A00F_CMD_TRIGGER_PROX_DIS:
561 		clear_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
562 		err = gp2ap020a00f_alter_opmode(data,
563 						GP2AP020A00F_OPMODE_PS,
564 						GP2AP020A00F_SUBTRACT_MODE);
565 		break;
566 	case GP2AP020A00F_CMD_ALS_HIGH_EV_EN:
567 		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
568 			return 0;
569 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
570 			return -EBUSY;
571 		if (!gp2ap020a00f_als_enabled(data)) {
572 			err = gp2ap020a00f_alter_opmode(data,
573 						GP2AP020A00F_OPMODE_ALS,
574 						GP2AP020A00F_ADD_MODE);
575 			if (err < 0)
576 				return err;
577 		}
578 		set_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
579 		err =  gp2ap020a00f_write_event_threshold(data,
580 					GP2AP020A00F_THRESH_TH, true);
581 		break;
582 	case GP2AP020A00F_CMD_ALS_HIGH_EV_DIS:
583 		if (!test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
584 			return 0;
585 		clear_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
586 		if (!gp2ap020a00f_als_enabled(data)) {
587 			err = gp2ap020a00f_alter_opmode(data,
588 						GP2AP020A00F_OPMODE_ALS,
589 						GP2AP020A00F_SUBTRACT_MODE);
590 			if (err < 0)
591 				return err;
592 		}
593 		err =  gp2ap020a00f_write_event_threshold(data,
594 					GP2AP020A00F_THRESH_TH, false);
595 		break;
596 	case GP2AP020A00F_CMD_ALS_LOW_EV_EN:
597 		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
598 			return 0;
599 		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
600 			return -EBUSY;
601 		if (!gp2ap020a00f_als_enabled(data)) {
602 			err = gp2ap020a00f_alter_opmode(data,
603 						GP2AP020A00F_OPMODE_ALS,
604 						GP2AP020A00F_ADD_MODE);
605 			if (err < 0)
606 				return err;
607 		}
608 		set_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
609 		err =  gp2ap020a00f_write_event_threshold(data,
610 					GP2AP020A00F_THRESH_TL, true);
611 		break;
612 	case GP2AP020A00F_CMD_ALS_LOW_EV_DIS:
613 		if (!test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
614 			return 0;
615 		clear_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
616 		if (!gp2ap020a00f_als_enabled(data)) {
617 			err = gp2ap020a00f_alter_opmode(data,
618 						GP2AP020A00F_OPMODE_ALS,
619 						GP2AP020A00F_SUBTRACT_MODE);
620 			if (err < 0)
621 				return err;
622 		}
623 		err =  gp2ap020a00f_write_event_threshold(data,
624 					GP2AP020A00F_THRESH_TL, false);
625 		break;
626 	case GP2AP020A00F_CMD_PROX_HIGH_EV_EN:
627 		if (test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
628 			return 0;
629 		if (gp2ap020a00f_als_enabled(data) ||
630 		    data->cur_opmode == GP2AP020A00F_OPMODE_PS)
631 			return -EBUSY;
632 		if (!gp2ap020a00f_prox_detect_enabled(data)) {
633 			err = gp2ap020a00f_set_operation_mode(data,
634 					GP2AP020A00F_OPMODE_PROX_DETECT);
635 			if (err < 0)
636 				return err;
637 		}
638 		set_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
639 		err =  gp2ap020a00f_write_event_threshold(data,
640 					GP2AP020A00F_THRESH_PH, true);
641 		break;
642 	case GP2AP020A00F_CMD_PROX_HIGH_EV_DIS:
643 		if (!test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
644 			return 0;
645 		clear_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
646 		err = gp2ap020a00f_set_operation_mode(data,
647 					GP2AP020A00F_OPMODE_SHUTDOWN);
648 		if (err < 0)
649 			return err;
650 		err =  gp2ap020a00f_write_event_threshold(data,
651 					GP2AP020A00F_THRESH_PH, false);
652 		break;
653 	case GP2AP020A00F_CMD_PROX_LOW_EV_EN:
654 		if (test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
655 			return 0;
656 		if (gp2ap020a00f_als_enabled(data) ||
657 		    data->cur_opmode == GP2AP020A00F_OPMODE_PS)
658 			return -EBUSY;
659 		if (!gp2ap020a00f_prox_detect_enabled(data)) {
660 			err = gp2ap020a00f_set_operation_mode(data,
661 					GP2AP020A00F_OPMODE_PROX_DETECT);
662 			if (err < 0)
663 				return err;
664 		}
665 		set_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
666 		err =  gp2ap020a00f_write_event_threshold(data,
667 					GP2AP020A00F_THRESH_PL, true);
668 		break;
669 	case GP2AP020A00F_CMD_PROX_LOW_EV_DIS:
670 		if (!test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
671 			return 0;
672 		clear_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
673 		err = gp2ap020a00f_set_operation_mode(data,
674 					GP2AP020A00F_OPMODE_SHUTDOWN);
675 		if (err < 0)
676 			return err;
677 		err =  gp2ap020a00f_write_event_threshold(data,
678 					GP2AP020A00F_THRESH_PL, false);
679 		break;
680 	}
681 
682 	return err;
683 }
684 
685 static int wait_conversion_complete_irq(struct gp2ap020a00f_data *data)
686 {
687 	int ret;
688 
689 	ret = wait_event_timeout(data->data_ready_queue,
690 				 test_bit(GP2AP020A00F_FLAG_DATA_READY,
691 					  &data->flags),
692 				 GP2AP020A00F_DATA_READY_TIMEOUT);
693 	clear_bit(GP2AP020A00F_FLAG_DATA_READY, &data->flags);
694 
695 	return ret > 0 ? 0 : -ETIME;
696 }
697 
698 static int gp2ap020a00f_read_output(struct gp2ap020a00f_data *data,
699 					unsigned int output_reg, int *val)
700 {
701 	u8 reg_buf[2];
702 	int err;
703 
704 	err = wait_conversion_complete_irq(data);
705 	if (err < 0)
706 		dev_dbg(&data->client->dev, "data ready timeout\n");
707 
708 	err = regmap_bulk_read(data->regmap, output_reg, reg_buf, 2);
709 	if (err < 0)
710 		return err;
711 
712 	*val = le16_to_cpup((__le16 *)reg_buf);
713 
714 	return err;
715 }
716 
717 static bool gp2ap020a00f_adjust_lux_mode(struct gp2ap020a00f_data *data,
718 				 int output_val)
719 {
720 	u8 new_range = 0xff;
721 	int err;
722 
723 	if (!test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags)) {
724 		if (output_val > 16000) {
725 			set_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
726 			new_range = GP2AP020A00F_RANGE_A_x128;
727 		}
728 	} else {
729 		if (output_val < 1000) {
730 			clear_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
731 			new_range = GP2AP020A00F_RANGE_A_x8;
732 		}
733 	}
734 
735 	if (new_range != 0xff) {
736 		/* Clear als threshold registers to avoid spurious
737 		 * events caused by lux mode transition.
738 		 */
739 		err =  gp2ap020a00f_write_event_threshold(data,
740 					GP2AP020A00F_THRESH_TH, false);
741 		if (err < 0) {
742 			dev_err(&data->client->dev,
743 				"Clearing als threshold register failed.\n");
744 			return false;
745 		}
746 
747 		err =  gp2ap020a00f_write_event_threshold(data,
748 					GP2AP020A00F_THRESH_TL, false);
749 		if (err < 0) {
750 			dev_err(&data->client->dev,
751 				"Clearing als threshold register failed.\n");
752 			return false;
753 		}
754 
755 		/* Change lux mode */
756 		err = regmap_update_bits(data->regmap,
757 			GP2AP020A00F_OP_REG,
758 			GP2AP020A00F_OP3_MASK,
759 			GP2AP020A00F_OP3_SHUTDOWN);
760 
761 		if (err < 0) {
762 			dev_err(&data->client->dev,
763 				"Shutting down the device failed.\n");
764 			return false;
765 		}
766 
767 		err = regmap_update_bits(data->regmap,
768 			GP2AP020A00F_ALS_REG,
769 			GP2AP020A00F_RANGE_A_MASK,
770 			new_range);
771 
772 		if (err < 0) {
773 			dev_err(&data->client->dev,
774 				"Adjusting device lux mode failed.\n");
775 			return false;
776 		}
777 
778 		err = regmap_update_bits(data->regmap,
779 			GP2AP020A00F_OP_REG,
780 			GP2AP020A00F_OP3_MASK,
781 			GP2AP020A00F_OP3_OPERATION);
782 
783 		if (err < 0) {
784 			dev_err(&data->client->dev,
785 				"Powering up the device failed.\n");
786 			return false;
787 		}
788 
789 		/* Adjust als threshold register values to the new lux mode */
790 		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) {
791 			err =  gp2ap020a00f_write_event_threshold(data,
792 					GP2AP020A00F_THRESH_TH, true);
793 			if (err < 0) {
794 				dev_err(&data->client->dev,
795 				"Adjusting als threshold value failed.\n");
796 				return false;
797 			}
798 		}
799 
800 		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) {
801 			err =  gp2ap020a00f_write_event_threshold(data,
802 					GP2AP020A00F_THRESH_TL, true);
803 			if (err < 0) {
804 				dev_err(&data->client->dev,
805 				"Adjusting als threshold value failed.\n");
806 				return false;
807 			}
808 		}
809 
810 		return true;
811 	}
812 
813 	return false;
814 }
815 
816 static void gp2ap020a00f_output_to_lux(struct gp2ap020a00f_data *data,
817 						int *output_val)
818 {
819 	if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags))
820 		*output_val *= 16;
821 }
822 
823 static void gp2ap020a00f_iio_trigger_work(struct irq_work *work)
824 {
825 	struct gp2ap020a00f_data *data =
826 		container_of(work, struct gp2ap020a00f_data, work);
827 
828 	iio_trigger_poll(data->trig);
829 }
830 
831 static irqreturn_t gp2ap020a00f_prox_sensing_handler(int irq, void *data)
832 {
833 	struct iio_dev *indio_dev = data;
834 	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
835 	unsigned int op_reg_val;
836 	int ret;
837 
838 	/* Read interrupt flags */
839 	ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG, &op_reg_val);
840 	if (ret < 0)
841 		return IRQ_HANDLED;
842 
843 	if (gp2ap020a00f_prox_detect_enabled(priv)) {
844 		if (op_reg_val & GP2AP020A00F_PROX_DETECT) {
845 			iio_push_event(indio_dev,
846 			       IIO_UNMOD_EVENT_CODE(
847 				    IIO_PROXIMITY,
848 				    GP2AP020A00F_SCAN_MODE_PROXIMITY,
849 				    IIO_EV_TYPE_ROC,
850 				    IIO_EV_DIR_RISING),
851 			       iio_get_time_ns(indio_dev));
852 		} else {
853 			iio_push_event(indio_dev,
854 			       IIO_UNMOD_EVENT_CODE(
855 				    IIO_PROXIMITY,
856 				    GP2AP020A00F_SCAN_MODE_PROXIMITY,
857 				    IIO_EV_TYPE_ROC,
858 				    IIO_EV_DIR_FALLING),
859 			       iio_get_time_ns(indio_dev));
860 		}
861 	}
862 
863 	return IRQ_HANDLED;
864 }
865 
866 static irqreturn_t gp2ap020a00f_thresh_event_handler(int irq, void *data)
867 {
868 	struct iio_dev *indio_dev = data;
869 	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
870 	u8 op_reg_flags, d0_reg_buf[2];
871 	unsigned int output_val, op_reg_val;
872 	int thresh_val_id, ret;
873 
874 	/* Read interrupt flags */
875 	ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG,
876 							&op_reg_val);
877 	if (ret < 0)
878 		goto done;
879 
880 	op_reg_flags = op_reg_val & (GP2AP020A00F_FLAG_A | GP2AP020A00F_FLAG_P
881 					| GP2AP020A00F_PROX_DETECT);
882 
883 	op_reg_val &= (~GP2AP020A00F_FLAG_A & ~GP2AP020A00F_FLAG_P
884 					& ~GP2AP020A00F_PROX_DETECT);
885 
886 	/* Clear interrupt flags (if not in INTTYPE_PULSE mode) */
887 	if (priv->cur_opmode != GP2AP020A00F_OPMODE_PROX_DETECT) {
888 		ret = regmap_write(priv->regmap, GP2AP020A00F_OP_REG,
889 								op_reg_val);
890 		if (ret < 0)
891 			goto done;
892 	}
893 
894 	if (op_reg_flags & GP2AP020A00F_FLAG_A) {
895 		/* Check D0 register to assess if the lux mode
896 		 * transition is required.
897 		 */
898 		ret = regmap_bulk_read(priv->regmap, GP2AP020A00F_D0_L_REG,
899 							d0_reg_buf, 2);
900 		if (ret < 0)
901 			goto done;
902 
903 		output_val = le16_to_cpup((__le16 *)d0_reg_buf);
904 
905 		if (gp2ap020a00f_adjust_lux_mode(priv, output_val))
906 			goto done;
907 
908 		gp2ap020a00f_output_to_lux(priv, &output_val);
909 
910 		/*
911 		 * We need to check output value to distinguish
912 		 * between high and low ambient light threshold event.
913 		 */
914 		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &priv->flags)) {
915 			thresh_val_id =
916 			    GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TH_L_REG);
917 			if (output_val > priv->thresh_val[thresh_val_id])
918 				iio_push_event(indio_dev,
919 				       IIO_MOD_EVENT_CODE(
920 					    IIO_LIGHT,
921 					    GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
922 					    IIO_MOD_LIGHT_CLEAR,
923 					    IIO_EV_TYPE_THRESH,
924 					    IIO_EV_DIR_RISING),
925 				       iio_get_time_ns(indio_dev));
926 		}
927 
928 		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &priv->flags)) {
929 			thresh_val_id =
930 			    GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TL_L_REG);
931 			if (output_val < priv->thresh_val[thresh_val_id])
932 				iio_push_event(indio_dev,
933 				       IIO_MOD_EVENT_CODE(
934 					    IIO_LIGHT,
935 					    GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
936 					    IIO_MOD_LIGHT_CLEAR,
937 					    IIO_EV_TYPE_THRESH,
938 					    IIO_EV_DIR_FALLING),
939 				       iio_get_time_ns(indio_dev));
940 		}
941 	}
942 
943 	if (priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_CLEAR ||
944 	    priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_IR ||
945 	    priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY) {
946 		set_bit(GP2AP020A00F_FLAG_DATA_READY, &priv->flags);
947 		wake_up(&priv->data_ready_queue);
948 		goto done;
949 	}
950 
951 	if (test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &priv->flags) ||
952 	    test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &priv->flags) ||
953 	    test_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &priv->flags))
954 		/* This fires off the trigger. */
955 		irq_work_queue(&priv->work);
956 
957 done:
958 	return IRQ_HANDLED;
959 }
960 
961 static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data)
962 {
963 	struct iio_poll_func *pf = data;
964 	struct iio_dev *indio_dev = pf->indio_dev;
965 	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
966 	size_t d_size = 0;
967 	int i, out_val, ret;
968 
969 	for_each_set_bit(i, indio_dev->active_scan_mask,
970 		indio_dev->masklength) {
971 		ret = regmap_bulk_read(priv->regmap,
972 				GP2AP020A00F_DATA_REG(i),
973 				&priv->buffer[d_size], 2);
974 		if (ret < 0)
975 			goto done;
976 
977 		if (i == GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR ||
978 		    i == GP2AP020A00F_SCAN_MODE_LIGHT_IR) {
979 			out_val = le16_to_cpup((__le16 *)&priv->buffer[d_size]);
980 			gp2ap020a00f_output_to_lux(priv, &out_val);
981 
982 			put_unaligned_le32(out_val, &priv->buffer[d_size]);
983 			d_size += 4;
984 		} else {
985 			d_size += 2;
986 		}
987 	}
988 
989 	iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer,
990 		pf->timestamp);
991 done:
992 	iio_trigger_notify_done(indio_dev->trig);
993 
994 	return IRQ_HANDLED;
995 }
996 
997 static u8 gp2ap020a00f_get_thresh_reg(const struct iio_chan_spec *chan,
998 					     enum iio_event_direction event_dir)
999 {
1000 	switch (chan->type) {
1001 	case IIO_PROXIMITY:
1002 		if (event_dir == IIO_EV_DIR_RISING)
1003 			return GP2AP020A00F_PH_L_REG;
1004 		else
1005 			return GP2AP020A00F_PL_L_REG;
1006 	case IIO_LIGHT:
1007 		if (event_dir == IIO_EV_DIR_RISING)
1008 			return GP2AP020A00F_TH_L_REG;
1009 		else
1010 			return GP2AP020A00F_TL_L_REG;
1011 	default:
1012 		break;
1013 	}
1014 
1015 	return -EINVAL;
1016 }
1017 
1018 static int gp2ap020a00f_write_event_val(struct iio_dev *indio_dev,
1019 					const struct iio_chan_spec *chan,
1020 					enum iio_event_type type,
1021 					enum iio_event_direction dir,
1022 					enum iio_event_info info,
1023 					int val, int val2)
1024 {
1025 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1026 	bool event_en = false;
1027 	u8 thresh_val_id;
1028 	u8 thresh_reg_l;
1029 	int err = 0;
1030 
1031 	mutex_lock(&data->lock);
1032 
1033 	thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
1034 	thresh_val_id = GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l);
1035 
1036 	if (thresh_val_id > GP2AP020A00F_THRESH_PH) {
1037 		err = -EINVAL;
1038 		goto error_unlock;
1039 	}
1040 
1041 	switch (thresh_reg_l) {
1042 	case GP2AP020A00F_TH_L_REG:
1043 		event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
1044 							&data->flags);
1045 		break;
1046 	case GP2AP020A00F_TL_L_REG:
1047 		event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
1048 							&data->flags);
1049 		break;
1050 	case GP2AP020A00F_PH_L_REG:
1051 		if (val == 0) {
1052 			err = -EINVAL;
1053 			goto error_unlock;
1054 		}
1055 		event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
1056 							&data->flags);
1057 		break;
1058 	case GP2AP020A00F_PL_L_REG:
1059 		if (val == 0) {
1060 			err = -EINVAL;
1061 			goto error_unlock;
1062 		}
1063 		event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
1064 							&data->flags);
1065 		break;
1066 	}
1067 
1068 	data->thresh_val[thresh_val_id] = val;
1069 	err =  gp2ap020a00f_write_event_threshold(data, thresh_val_id,
1070 							event_en);
1071 error_unlock:
1072 	mutex_unlock(&data->lock);
1073 
1074 	return err;
1075 }
1076 
1077 static int gp2ap020a00f_read_event_val(struct iio_dev *indio_dev,
1078 				       const struct iio_chan_spec *chan,
1079 				       enum iio_event_type type,
1080 				       enum iio_event_direction dir,
1081 				       enum iio_event_info info,
1082 				       int *val, int *val2)
1083 {
1084 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1085 	u8 thresh_reg_l;
1086 	int err = IIO_VAL_INT;
1087 
1088 	mutex_lock(&data->lock);
1089 
1090 	thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
1091 
1092 	if (thresh_reg_l > GP2AP020A00F_PH_L_REG) {
1093 		err = -EINVAL;
1094 		goto error_unlock;
1095 	}
1096 
1097 	*val = data->thresh_val[GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l)];
1098 
1099 error_unlock:
1100 	mutex_unlock(&data->lock);
1101 
1102 	return err;
1103 }
1104 
1105 static int gp2ap020a00f_write_prox_event_config(struct iio_dev *indio_dev,
1106 						int state)
1107 {
1108 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1109 	enum gp2ap020a00f_cmd cmd_high_ev, cmd_low_ev;
1110 	int err;
1111 
1112 	cmd_high_ev = state ? GP2AP020A00F_CMD_PROX_HIGH_EV_EN :
1113 			      GP2AP020A00F_CMD_PROX_HIGH_EV_DIS;
1114 	cmd_low_ev = state ? GP2AP020A00F_CMD_PROX_LOW_EV_EN :
1115 			     GP2AP020A00F_CMD_PROX_LOW_EV_DIS;
1116 
1117 	/*
1118 	 * In order to enable proximity detection feature in the device
1119 	 * both high and low threshold registers have to be written
1120 	 * with different values, greater than zero.
1121 	 */
1122 	if (state) {
1123 		if (data->thresh_val[GP2AP020A00F_THRESH_PL] == 0)
1124 			return -EINVAL;
1125 
1126 		if (data->thresh_val[GP2AP020A00F_THRESH_PH] == 0)
1127 			return -EINVAL;
1128 	}
1129 
1130 	err = gp2ap020a00f_exec_cmd(data, cmd_high_ev);
1131 	if (err < 0)
1132 		return err;
1133 
1134 	err = gp2ap020a00f_exec_cmd(data, cmd_low_ev);
1135 	if (err < 0)
1136 		return err;
1137 
1138 	free_irq(data->client->irq, indio_dev);
1139 
1140 	if (state)
1141 		err = request_threaded_irq(data->client->irq, NULL,
1142 					   &gp2ap020a00f_prox_sensing_handler,
1143 					   IRQF_TRIGGER_RISING |
1144 					   IRQF_TRIGGER_FALLING |
1145 					   IRQF_ONESHOT,
1146 					   "gp2ap020a00f_prox_sensing",
1147 					   indio_dev);
1148 	else {
1149 		err = request_threaded_irq(data->client->irq, NULL,
1150 					   &gp2ap020a00f_thresh_event_handler,
1151 					   IRQF_TRIGGER_FALLING |
1152 					   IRQF_ONESHOT,
1153 					   "gp2ap020a00f_thresh_event",
1154 					   indio_dev);
1155 	}
1156 
1157 	return err;
1158 }
1159 
1160 static int gp2ap020a00f_write_event_config(struct iio_dev *indio_dev,
1161 					   const struct iio_chan_spec *chan,
1162 					   enum iio_event_type type,
1163 					   enum iio_event_direction dir,
1164 					   int state)
1165 {
1166 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1167 	enum gp2ap020a00f_cmd cmd;
1168 	int err;
1169 
1170 	mutex_lock(&data->lock);
1171 
1172 	switch (chan->type) {
1173 	case IIO_PROXIMITY:
1174 		err = gp2ap020a00f_write_prox_event_config(indio_dev, state);
1175 		break;
1176 	case IIO_LIGHT:
1177 		if (dir == IIO_EV_DIR_RISING) {
1178 			cmd = state ? GP2AP020A00F_CMD_ALS_HIGH_EV_EN :
1179 				      GP2AP020A00F_CMD_ALS_HIGH_EV_DIS;
1180 			err = gp2ap020a00f_exec_cmd(data, cmd);
1181 		} else {
1182 			cmd = state ? GP2AP020A00F_CMD_ALS_LOW_EV_EN :
1183 				      GP2AP020A00F_CMD_ALS_LOW_EV_DIS;
1184 			err = gp2ap020a00f_exec_cmd(data, cmd);
1185 		}
1186 		break;
1187 	default:
1188 		err = -EINVAL;
1189 	}
1190 
1191 	mutex_unlock(&data->lock);
1192 
1193 	return err;
1194 }
1195 
1196 static int gp2ap020a00f_read_event_config(struct iio_dev *indio_dev,
1197 					   const struct iio_chan_spec *chan,
1198 					   enum iio_event_type type,
1199 					   enum iio_event_direction dir)
1200 {
1201 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1202 	int event_en = 0;
1203 
1204 	mutex_lock(&data->lock);
1205 
1206 	switch (chan->type) {
1207 	case IIO_PROXIMITY:
1208 		if (dir == IIO_EV_DIR_RISING)
1209 			event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
1210 								&data->flags);
1211 		else
1212 			event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
1213 								&data->flags);
1214 		break;
1215 	case IIO_LIGHT:
1216 		if (dir == IIO_EV_DIR_RISING)
1217 			event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
1218 								&data->flags);
1219 		else
1220 			event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
1221 								&data->flags);
1222 		break;
1223 	default:
1224 		event_en = -EINVAL;
1225 		break;
1226 	}
1227 
1228 	mutex_unlock(&data->lock);
1229 
1230 	return event_en;
1231 }
1232 
1233 static int gp2ap020a00f_read_channel(struct gp2ap020a00f_data *data,
1234 				struct iio_chan_spec const *chan, int *val)
1235 {
1236 	enum gp2ap020a00f_cmd cmd;
1237 	int err;
1238 
1239 	switch (chan->scan_index) {
1240 	case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
1241 		cmd = GP2AP020A00F_CMD_READ_RAW_CLEAR;
1242 		break;
1243 	case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
1244 		cmd = GP2AP020A00F_CMD_READ_RAW_IR;
1245 		break;
1246 	case GP2AP020A00F_SCAN_MODE_PROXIMITY:
1247 		cmd = GP2AP020A00F_CMD_READ_RAW_PROXIMITY;
1248 		break;
1249 	default:
1250 		return -EINVAL;
1251 	}
1252 
1253 	err = gp2ap020a00f_exec_cmd(data, cmd);
1254 	if (err < 0) {
1255 		dev_err(&data->client->dev,
1256 			"gp2ap020a00f_exec_cmd failed\n");
1257 		goto error_ret;
1258 	}
1259 
1260 	err = gp2ap020a00f_read_output(data, chan->address, val);
1261 	if (err < 0)
1262 		dev_err(&data->client->dev,
1263 			"gp2ap020a00f_read_output failed\n");
1264 
1265 	err = gp2ap020a00f_set_operation_mode(data,
1266 					GP2AP020A00F_OPMODE_SHUTDOWN);
1267 	if (err < 0)
1268 		dev_err(&data->client->dev,
1269 			"Failed to shut down the device.\n");
1270 
1271 	if (cmd == GP2AP020A00F_CMD_READ_RAW_CLEAR ||
1272 	    cmd == GP2AP020A00F_CMD_READ_RAW_IR)
1273 		gp2ap020a00f_output_to_lux(data, val);
1274 
1275 error_ret:
1276 	return err;
1277 }
1278 
1279 static int gp2ap020a00f_read_raw(struct iio_dev *indio_dev,
1280 			   struct iio_chan_spec const *chan,
1281 			   int *val, int *val2,
1282 			   long mask)
1283 {
1284 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1285 	int err = -EINVAL;
1286 
1287 	if (mask == IIO_CHAN_INFO_RAW) {
1288 		err = iio_device_claim_direct_mode(indio_dev);
1289 		if (err)
1290 			return err;
1291 
1292 		err = gp2ap020a00f_read_channel(data, chan, val);
1293 		iio_device_release_direct_mode(indio_dev);
1294 	}
1295 	return err < 0 ? err : IIO_VAL_INT;
1296 }
1297 
1298 static const struct iio_event_spec gp2ap020a00f_event_spec_light[] = {
1299 	{
1300 		.type = IIO_EV_TYPE_THRESH,
1301 		.dir = IIO_EV_DIR_RISING,
1302 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
1303 			BIT(IIO_EV_INFO_ENABLE),
1304 	}, {
1305 		.type = IIO_EV_TYPE_THRESH,
1306 		.dir = IIO_EV_DIR_FALLING,
1307 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
1308 			BIT(IIO_EV_INFO_ENABLE),
1309 	},
1310 };
1311 
1312 static const struct iio_event_spec gp2ap020a00f_event_spec_prox[] = {
1313 	{
1314 		.type = IIO_EV_TYPE_ROC,
1315 		.dir = IIO_EV_DIR_RISING,
1316 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
1317 			BIT(IIO_EV_INFO_ENABLE),
1318 	}, {
1319 		.type = IIO_EV_TYPE_ROC,
1320 		.dir = IIO_EV_DIR_FALLING,
1321 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
1322 			BIT(IIO_EV_INFO_ENABLE),
1323 	},
1324 };
1325 
1326 static const struct iio_chan_spec gp2ap020a00f_channels[] = {
1327 	{
1328 		.type = IIO_LIGHT,
1329 		.channel2 = IIO_MOD_LIGHT_CLEAR,
1330 		.modified = 1,
1331 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
1332 		.scan_type = {
1333 			.sign = 'u',
1334 			.realbits = 24,
1335 			.shift = 0,
1336 			.storagebits = 32,
1337 			.endianness = IIO_LE,
1338 		},
1339 		.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
1340 		.address = GP2AP020A00F_D0_L_REG,
1341 		.event_spec = gp2ap020a00f_event_spec_light,
1342 		.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_light),
1343 	},
1344 	{
1345 		.type = IIO_LIGHT,
1346 		.channel2 = IIO_MOD_LIGHT_IR,
1347 		.modified = 1,
1348 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
1349 		.scan_type = {
1350 			.sign = 'u',
1351 			.realbits = 24,
1352 			.shift = 0,
1353 			.storagebits = 32,
1354 			.endianness = IIO_LE,
1355 		},
1356 		.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_IR,
1357 		.address = GP2AP020A00F_D1_L_REG,
1358 	},
1359 	{
1360 		.type = IIO_PROXIMITY,
1361 		.modified = 0,
1362 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
1363 		.scan_type = {
1364 			.sign = 'u',
1365 			.realbits = 16,
1366 			.shift = 0,
1367 			.storagebits = 16,
1368 			.endianness = IIO_LE,
1369 		},
1370 		.scan_index = GP2AP020A00F_SCAN_MODE_PROXIMITY,
1371 		.address = GP2AP020A00F_D2_L_REG,
1372 		.event_spec = gp2ap020a00f_event_spec_prox,
1373 		.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_prox),
1374 	},
1375 	IIO_CHAN_SOFT_TIMESTAMP(GP2AP020A00F_CHAN_TIMESTAMP),
1376 };
1377 
1378 static const struct iio_info gp2ap020a00f_info = {
1379 	.read_raw = &gp2ap020a00f_read_raw,
1380 	.read_event_value = &gp2ap020a00f_read_event_val,
1381 	.read_event_config = &gp2ap020a00f_read_event_config,
1382 	.write_event_value = &gp2ap020a00f_write_event_val,
1383 	.write_event_config = &gp2ap020a00f_write_event_config,
1384 };
1385 
1386 static int gp2ap020a00f_buffer_postenable(struct iio_dev *indio_dev)
1387 {
1388 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1389 	int i, err = 0;
1390 
1391 	mutex_lock(&data->lock);
1392 
1393 	/*
1394 	 * Enable triggers according to the scan_mask. Enabling either
1395 	 * LIGHT_CLEAR or LIGHT_IR scan mode results in enabling ALS
1396 	 * module in the device, which generates samples in both D0 (clear)
1397 	 * and D1 (ir) registers. As the two registers are bound to the
1398 	 * two separate IIO channels they are treated in the driver logic
1399 	 * as if they were controlled independently.
1400 	 */
1401 	for_each_set_bit(i, indio_dev->active_scan_mask,
1402 		indio_dev->masklength) {
1403 		switch (i) {
1404 		case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
1405 			err = gp2ap020a00f_exec_cmd(data,
1406 					GP2AP020A00F_CMD_TRIGGER_CLEAR_EN);
1407 			break;
1408 		case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
1409 			err = gp2ap020a00f_exec_cmd(data,
1410 					GP2AP020A00F_CMD_TRIGGER_IR_EN);
1411 			break;
1412 		case GP2AP020A00F_SCAN_MODE_PROXIMITY:
1413 			err = gp2ap020a00f_exec_cmd(data,
1414 					GP2AP020A00F_CMD_TRIGGER_PROX_EN);
1415 			break;
1416 		}
1417 	}
1418 
1419 	if (err < 0)
1420 		goto error_unlock;
1421 
1422 	data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
1423 	if (!data->buffer)
1424 		err = -ENOMEM;
1425 
1426 error_unlock:
1427 	mutex_unlock(&data->lock);
1428 
1429 	return err;
1430 }
1431 
1432 static int gp2ap020a00f_buffer_predisable(struct iio_dev *indio_dev)
1433 {
1434 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1435 	int i, err = 0;
1436 
1437 	mutex_lock(&data->lock);
1438 
1439 	for_each_set_bit(i, indio_dev->active_scan_mask,
1440 		indio_dev->masklength) {
1441 		switch (i) {
1442 		case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
1443 			err = gp2ap020a00f_exec_cmd(data,
1444 					GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS);
1445 			break;
1446 		case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
1447 			err = gp2ap020a00f_exec_cmd(data,
1448 					GP2AP020A00F_CMD_TRIGGER_IR_DIS);
1449 			break;
1450 		case GP2AP020A00F_SCAN_MODE_PROXIMITY:
1451 			err = gp2ap020a00f_exec_cmd(data,
1452 					GP2AP020A00F_CMD_TRIGGER_PROX_DIS);
1453 			break;
1454 		}
1455 	}
1456 
1457 	if (err == 0)
1458 		kfree(data->buffer);
1459 
1460 	mutex_unlock(&data->lock);
1461 
1462 	return err;
1463 }
1464 
1465 static const struct iio_buffer_setup_ops gp2ap020a00f_buffer_setup_ops = {
1466 	.postenable = &gp2ap020a00f_buffer_postenable,
1467 	.predisable = &gp2ap020a00f_buffer_predisable,
1468 };
1469 
1470 static const struct iio_trigger_ops gp2ap020a00f_trigger_ops = {
1471 };
1472 
1473 static int gp2ap020a00f_probe(struct i2c_client *client,
1474 				const struct i2c_device_id *id)
1475 {
1476 	struct gp2ap020a00f_data *data;
1477 	struct iio_dev *indio_dev;
1478 	struct regmap *regmap;
1479 	int err;
1480 
1481 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
1482 	if (!indio_dev)
1483 		return -ENOMEM;
1484 
1485 	data = iio_priv(indio_dev);
1486 
1487 	data->vled_reg = devm_regulator_get(&client->dev, "vled");
1488 	if (IS_ERR(data->vled_reg))
1489 		return PTR_ERR(data->vled_reg);
1490 
1491 	err = regulator_enable(data->vled_reg);
1492 	if (err)
1493 		return err;
1494 
1495 	regmap = devm_regmap_init_i2c(client, &gp2ap020a00f_regmap_config);
1496 	if (IS_ERR(regmap)) {
1497 		dev_err(&client->dev, "Regmap initialization failed.\n");
1498 		err = PTR_ERR(regmap);
1499 		goto error_regulator_disable;
1500 	}
1501 
1502 	/* Initialize device registers */
1503 	err = regmap_bulk_write(regmap, GP2AP020A00F_OP_REG,
1504 			gp2ap020a00f_reg_init_tab,
1505 			ARRAY_SIZE(gp2ap020a00f_reg_init_tab));
1506 
1507 	if (err < 0) {
1508 		dev_err(&client->dev, "Device initialization failed.\n");
1509 		goto error_regulator_disable;
1510 	}
1511 
1512 	i2c_set_clientdata(client, indio_dev);
1513 
1514 	data->client = client;
1515 	data->cur_opmode = GP2AP020A00F_OPMODE_SHUTDOWN;
1516 	data->regmap = regmap;
1517 	init_waitqueue_head(&data->data_ready_queue);
1518 
1519 	mutex_init(&data->lock);
1520 	indio_dev->channels = gp2ap020a00f_channels;
1521 	indio_dev->num_channels = ARRAY_SIZE(gp2ap020a00f_channels);
1522 	indio_dev->info = &gp2ap020a00f_info;
1523 	indio_dev->name = id->name;
1524 	indio_dev->modes = INDIO_DIRECT_MODE;
1525 
1526 	/* Allocate buffer */
1527 	err = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
1528 		&gp2ap020a00f_trigger_handler, &gp2ap020a00f_buffer_setup_ops);
1529 	if (err < 0)
1530 		goto error_regulator_disable;
1531 
1532 	/* Allocate trigger */
1533 	data->trig = devm_iio_trigger_alloc(&client->dev, "%s-trigger",
1534 							indio_dev->name);
1535 	if (data->trig == NULL) {
1536 		err = -ENOMEM;
1537 		dev_err(&indio_dev->dev, "Failed to allocate iio trigger.\n");
1538 		goto error_uninit_buffer;
1539 	}
1540 
1541 	/* This needs to be requested here for read_raw calls to work. */
1542 	err = request_threaded_irq(client->irq, NULL,
1543 				   &gp2ap020a00f_thresh_event_handler,
1544 				   IRQF_TRIGGER_FALLING |
1545 				   IRQF_ONESHOT,
1546 				   "gp2ap020a00f_als_event",
1547 				   indio_dev);
1548 	if (err < 0) {
1549 		dev_err(&client->dev, "Irq request failed.\n");
1550 		goto error_uninit_buffer;
1551 	}
1552 
1553 	data->trig->ops = &gp2ap020a00f_trigger_ops;
1554 	data->trig->dev.parent = &data->client->dev;
1555 
1556 	init_irq_work(&data->work, gp2ap020a00f_iio_trigger_work);
1557 
1558 	err = iio_trigger_register(data->trig);
1559 	if (err < 0) {
1560 		dev_err(&client->dev, "Failed to register iio trigger.\n");
1561 		goto error_free_irq;
1562 	}
1563 
1564 	err = iio_device_register(indio_dev);
1565 	if (err < 0)
1566 		goto error_trigger_unregister;
1567 
1568 	return 0;
1569 
1570 error_trigger_unregister:
1571 	iio_trigger_unregister(data->trig);
1572 error_free_irq:
1573 	free_irq(client->irq, indio_dev);
1574 error_uninit_buffer:
1575 	iio_triggered_buffer_cleanup(indio_dev);
1576 error_regulator_disable:
1577 	regulator_disable(data->vled_reg);
1578 
1579 	return err;
1580 }
1581 
1582 static int gp2ap020a00f_remove(struct i2c_client *client)
1583 {
1584 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
1585 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1586 	int err;
1587 
1588 	err = gp2ap020a00f_set_operation_mode(data,
1589 					GP2AP020A00F_OPMODE_SHUTDOWN);
1590 	if (err < 0)
1591 		dev_err(&indio_dev->dev, "Failed to power off the device.\n");
1592 
1593 	iio_device_unregister(indio_dev);
1594 	iio_trigger_unregister(data->trig);
1595 	free_irq(client->irq, indio_dev);
1596 	iio_triggered_buffer_cleanup(indio_dev);
1597 	regulator_disable(data->vled_reg);
1598 
1599 	return 0;
1600 }
1601 
1602 static const struct i2c_device_id gp2ap020a00f_id[] = {
1603 	{ GP2A_I2C_NAME, 0 },
1604 	{ }
1605 };
1606 
1607 MODULE_DEVICE_TABLE(i2c, gp2ap020a00f_id);
1608 
1609 static const struct of_device_id gp2ap020a00f_of_match[] = {
1610 	{ .compatible = "sharp,gp2ap020a00f" },
1611 	{ }
1612 };
1613 MODULE_DEVICE_TABLE(of, gp2ap020a00f_of_match);
1614 
1615 static struct i2c_driver gp2ap020a00f_driver = {
1616 	.driver = {
1617 		.name	= GP2A_I2C_NAME,
1618 		.of_match_table = gp2ap020a00f_of_match,
1619 	},
1620 	.probe		= gp2ap020a00f_probe,
1621 	.remove		= gp2ap020a00f_remove,
1622 	.id_table	= gp2ap020a00f_id,
1623 };
1624 
1625 module_i2c_driver(gp2ap020a00f_driver);
1626 
1627 MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
1628 MODULE_DESCRIPTION("Sharp GP2AP020A00F Proximity/ALS sensor driver");
1629 MODULE_LICENSE("GPL v2");
1630