1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * ROHM 1780GLI Ambient Light Sensor Driver 4 * 5 * Copyright (C) 2016 Linaro Ltd. 6 * Author: Linus Walleij <linus.walleij@linaro.org> 7 * Loosely based on the previous BH1780 ALS misc driver 8 * Copyright (C) 2010 Texas Instruments 9 * Author: Hemanth V <hemanthv@ti.com> 10 */ 11 #include <linux/i2c.h> 12 #include <linux/slab.h> 13 #include <linux/platform_device.h> 14 #include <linux/delay.h> 15 #include <linux/module.h> 16 #include <linux/mod_devicetable.h> 17 #include <linux/pm_runtime.h> 18 #include <linux/iio/iio.h> 19 #include <linux/iio/sysfs.h> 20 #include <linux/bitops.h> 21 22 #define BH1780_CMD_BIT BIT(7) 23 #define BH1780_REG_CONTROL 0x00 24 #define BH1780_REG_PARTID 0x0A 25 #define BH1780_REG_MANFID 0x0B 26 #define BH1780_REG_DLOW 0x0C 27 #define BH1780_REG_DHIGH 0x0D 28 29 #define BH1780_REVMASK GENMASK(3,0) 30 #define BH1780_POWMASK GENMASK(1,0) 31 #define BH1780_POFF (0x0) 32 #define BH1780_PON (0x3) 33 34 /* power on settling time in ms */ 35 #define BH1780_PON_DELAY 2 36 /* max time before value available in ms */ 37 #define BH1780_INTERVAL 250 38 39 struct bh1780_data { 40 struct i2c_client *client; 41 }; 42 43 static int bh1780_write(struct bh1780_data *bh1780, u8 reg, u8 val) 44 { 45 int ret = i2c_smbus_write_byte_data(bh1780->client, 46 BH1780_CMD_BIT | reg, 47 val); 48 if (ret < 0) 49 dev_err(&bh1780->client->dev, 50 "i2c_smbus_write_byte_data failed error " 51 "%d, register %01x\n", 52 ret, reg); 53 return ret; 54 } 55 56 static int bh1780_read(struct bh1780_data *bh1780, u8 reg) 57 { 58 int ret = i2c_smbus_read_byte_data(bh1780->client, 59 BH1780_CMD_BIT | reg); 60 if (ret < 0) 61 dev_err(&bh1780->client->dev, 62 "i2c_smbus_read_byte_data failed error " 63 "%d, register %01x\n", 64 ret, reg); 65 return ret; 66 } 67 68 static int bh1780_read_word(struct bh1780_data *bh1780, u8 reg) 69 { 70 int ret = i2c_smbus_read_word_data(bh1780->client, 71 BH1780_CMD_BIT | reg); 72 if (ret < 0) 73 dev_err(&bh1780->client->dev, 74 "i2c_smbus_read_word_data failed error " 75 "%d, register %01x\n", 76 ret, reg); 77 return ret; 78 } 79 80 static int bh1780_debugfs_reg_access(struct iio_dev *indio_dev, 81 unsigned int reg, unsigned int writeval, 82 unsigned int *readval) 83 { 84 struct bh1780_data *bh1780 = iio_priv(indio_dev); 85 int ret; 86 87 if (!readval) 88 return bh1780_write(bh1780, (u8)reg, (u8)writeval); 89 90 ret = bh1780_read(bh1780, (u8)reg); 91 if (ret < 0) 92 return ret; 93 94 *readval = ret; 95 96 return 0; 97 } 98 99 static int bh1780_read_raw(struct iio_dev *indio_dev, 100 struct iio_chan_spec const *chan, 101 int *val, int *val2, long mask) 102 { 103 struct bh1780_data *bh1780 = iio_priv(indio_dev); 104 int value; 105 106 switch (mask) { 107 case IIO_CHAN_INFO_RAW: 108 switch (chan->type) { 109 case IIO_LIGHT: 110 pm_runtime_get_sync(&bh1780->client->dev); 111 value = bh1780_read_word(bh1780, BH1780_REG_DLOW); 112 if (value < 0) 113 return value; 114 pm_runtime_mark_last_busy(&bh1780->client->dev); 115 pm_runtime_put_autosuspend(&bh1780->client->dev); 116 *val = value; 117 118 return IIO_VAL_INT; 119 default: 120 return -EINVAL; 121 } 122 case IIO_CHAN_INFO_INT_TIME: 123 *val = 0; 124 *val2 = BH1780_INTERVAL * 1000; 125 return IIO_VAL_INT_PLUS_MICRO; 126 default: 127 return -EINVAL; 128 } 129 } 130 131 static const struct iio_info bh1780_info = { 132 .read_raw = bh1780_read_raw, 133 .debugfs_reg_access = bh1780_debugfs_reg_access, 134 }; 135 136 static const struct iio_chan_spec bh1780_channels[] = { 137 { 138 .type = IIO_LIGHT, 139 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 140 BIT(IIO_CHAN_INFO_INT_TIME) 141 } 142 }; 143 144 static int bh1780_probe(struct i2c_client *client, 145 const struct i2c_device_id *id) 146 { 147 int ret; 148 struct bh1780_data *bh1780; 149 struct i2c_adapter *adapter = client->adapter; 150 struct iio_dev *indio_dev; 151 152 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) 153 return -EIO; 154 155 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*bh1780)); 156 if (!indio_dev) 157 return -ENOMEM; 158 159 bh1780 = iio_priv(indio_dev); 160 bh1780->client = client; 161 i2c_set_clientdata(client, indio_dev); 162 163 /* Power up the device */ 164 ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); 165 if (ret < 0) 166 return ret; 167 msleep(BH1780_PON_DELAY); 168 pm_runtime_get_noresume(&client->dev); 169 pm_runtime_set_active(&client->dev); 170 pm_runtime_enable(&client->dev); 171 172 ret = bh1780_read(bh1780, BH1780_REG_PARTID); 173 if (ret < 0) 174 goto out_disable_pm; 175 dev_info(&client->dev, 176 "Ambient Light Sensor, Rev : %lu\n", 177 (ret & BH1780_REVMASK)); 178 179 /* 180 * As the device takes 250 ms to even come up with a fresh 181 * measurement after power-on, do not shut it down unnecessarily. 182 * Set autosuspend to a five seconds. 183 */ 184 pm_runtime_set_autosuspend_delay(&client->dev, 5000); 185 pm_runtime_use_autosuspend(&client->dev); 186 pm_runtime_put(&client->dev); 187 188 indio_dev->dev.parent = &client->dev; 189 indio_dev->info = &bh1780_info; 190 indio_dev->name = "bh1780"; 191 indio_dev->channels = bh1780_channels; 192 indio_dev->num_channels = ARRAY_SIZE(bh1780_channels); 193 indio_dev->modes = INDIO_DIRECT_MODE; 194 195 ret = iio_device_register(indio_dev); 196 if (ret) 197 goto out_disable_pm; 198 return 0; 199 200 out_disable_pm: 201 pm_runtime_put_noidle(&client->dev); 202 pm_runtime_disable(&client->dev); 203 return ret; 204 } 205 206 static int bh1780_remove(struct i2c_client *client) 207 { 208 struct iio_dev *indio_dev = i2c_get_clientdata(client); 209 struct bh1780_data *bh1780 = iio_priv(indio_dev); 210 int ret; 211 212 iio_device_unregister(indio_dev); 213 pm_runtime_get_sync(&client->dev); 214 pm_runtime_put_noidle(&client->dev); 215 pm_runtime_disable(&client->dev); 216 ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); 217 if (ret < 0) { 218 dev_err(&client->dev, "failed to power off\n"); 219 return ret; 220 } 221 222 return 0; 223 } 224 225 #ifdef CONFIG_PM 226 static int bh1780_runtime_suspend(struct device *dev) 227 { 228 struct i2c_client *client = to_i2c_client(dev); 229 struct iio_dev *indio_dev = i2c_get_clientdata(client); 230 struct bh1780_data *bh1780 = iio_priv(indio_dev); 231 int ret; 232 233 ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); 234 if (ret < 0) { 235 dev_err(dev, "failed to runtime suspend\n"); 236 return ret; 237 } 238 239 return 0; 240 } 241 242 static int bh1780_runtime_resume(struct device *dev) 243 { 244 struct i2c_client *client = to_i2c_client(dev); 245 struct iio_dev *indio_dev = i2c_get_clientdata(client); 246 struct bh1780_data *bh1780 = iio_priv(indio_dev); 247 int ret; 248 249 ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); 250 if (ret < 0) { 251 dev_err(dev, "failed to runtime resume\n"); 252 return ret; 253 } 254 255 /* Wait for power on, then for a value to be available */ 256 msleep(BH1780_PON_DELAY + BH1780_INTERVAL); 257 258 return 0; 259 } 260 #endif /* CONFIG_PM */ 261 262 static const struct dev_pm_ops bh1780_dev_pm_ops = { 263 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, 264 pm_runtime_force_resume) 265 SET_RUNTIME_PM_OPS(bh1780_runtime_suspend, 266 bh1780_runtime_resume, NULL) 267 }; 268 269 static const struct i2c_device_id bh1780_id[] = { 270 { "bh1780", 0 }, 271 { }, 272 }; 273 274 MODULE_DEVICE_TABLE(i2c, bh1780_id); 275 276 static const struct of_device_id of_bh1780_match[] = { 277 { .compatible = "rohm,bh1780gli", }, 278 {}, 279 }; 280 MODULE_DEVICE_TABLE(of, of_bh1780_match); 281 282 static struct i2c_driver bh1780_driver = { 283 .probe = bh1780_probe, 284 .remove = bh1780_remove, 285 .id_table = bh1780_id, 286 .driver = { 287 .name = "bh1780", 288 .pm = &bh1780_dev_pm_ops, 289 .of_match_table = of_bh1780_match, 290 }, 291 }; 292 293 module_i2c_driver(bh1780_driver); 294 295 MODULE_DESCRIPTION("ROHM BH1780GLI Ambient Light Sensor Driver"); 296 MODULE_LICENSE("GPL"); 297 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); 298