1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config ADUX1020 36 tristate "ADUX1020 photometric sensor" 37 select REGMAP_I2C 38 depends on I2C 39 help 40 Say Y here if you want to build a driver for the Analog Devices 41 ADUX1020 photometric sensor. 42 43 To compile this driver as a module, choose M here: the 44 module will be called adux1020. 45 46config AL3010 47 tristate "AL3010 ambient light sensor" 48 depends on I2C 49 help 50 Say Y here if you want to build a driver for the Dyna Image AL3010 51 ambient light sensor. 52 53 To compile this driver as a module, choose M here: the 54 module will be called al3010. 55 56config AL3320A 57 tristate "AL3320A ambient light sensor" 58 depends on I2C 59 help 60 Say Y here if you want to build a driver for the Dyna Image AL3320A 61 ambient light sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called al3320a. 65 66config APDS9300 67 tristate "APDS9300 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here if you want to build a driver for the Avago APDS9300 71 ambient light sensor. 72 73 To compile this driver as a module, choose M here: the 74 module will be called apds9300. 75 76config APDS9960 77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 78 select REGMAP_I2C 79 select IIO_BUFFER 80 select IIO_KFIFO_BUF 81 depends on I2C 82 help 83 Say Y here to build I2C interface support for the Avago 84 APDS9960 gesture/RGB/ALS/proximity sensor. 85 86 To compile this driver as a module, choose M here: the 87 module will be called apds9960 88 89config AS73211 90 tristate "AMS AS73211 XYZ color sensor" 91 depends on I2C 92 select IIO_BUFFER 93 select IIO_TRIGGERED_BUFFER 94 help 95 If you say yes here you get support for the AMS AS73211 96 JENCOLOR(R) Digital XYZ Sensor. 97 98 For triggered measurements, you will need an additional trigger driver 99 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER. 100 101 This driver can also be built as a module. If so, the module 102 will be called as73211. 103 104config BH1750 105 tristate "ROHM BH1750 ambient light sensor" 106 depends on I2C 107 help 108 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 109 BH1750, BH1751 ambient light sensors. 110 111 To compile this driver as a module, choose M here: the module will 112 be called bh1750. 113 114config BH1780 115 tristate "ROHM BH1780 ambient light sensor" 116 depends on I2C 117 help 118 Say Y here to build support for the ROHM BH1780GLI ambient 119 light sensor. 120 121 To compile this driver as a module, choose M here: the module will 122 be called bh1780. 123 124config CM32181 125 depends on I2C 126 tristate "CM32181 driver" 127 help 128 Say Y here if you use cm32181. 129 This option enables ambient light sensor using 130 Capella cm32181 device driver. 131 132 To compile this driver as a module, choose M here: 133 the module will be called cm32181. 134 135config CM3232 136 depends on I2C 137 tristate "CM3232 ambient light sensor" 138 help 139 Say Y here if you use cm3232. 140 This option enables ambient light sensor using 141 Capella Microsystems cm3232 device driver. 142 143 To compile this driver as a module, choose M here: 144 the module will be called cm3232. 145 146config CM3323 147 depends on I2C 148 tristate "Capella CM3323 color light sensor" 149 help 150 Say Y here if you want to build a driver for Capella CM3323 151 color sensor. 152 153 To compile this driver as a module, choose M here: the module will 154 be called cm3323. 155 156config CM3605 157 tristate "Capella CM3605 ambient light and proximity sensor" 158 help 159 Say Y here if you want to build a driver for Capella CM3605 160 ambient light and short range proximity sensor. 161 162 To compile this driver as a module, choose M here: the module will 163 be called cm3605. 164 165config CM36651 166 depends on I2C 167 tristate "CM36651 driver" 168 help 169 Say Y here if you use cm36651. 170 This option enables proximity & RGB sensor using 171 Capella cm36651 device driver. 172 173 To compile this driver as a module, choose M here: 174 the module will be called cm36651. 175 176config IIO_CROS_EC_LIGHT_PROX 177 tristate "ChromeOS EC Light and Proximity Sensors" 178 depends on IIO_CROS_EC_SENSORS_CORE 179 help 180 Say Y here if you use the light and proximity sensors 181 presented by the ChromeOS EC Sensor hub. 182 183 To compile this driver as a module, choose M here: 184 the module will be called cros_ec_light_prox. 185 186config GP2AP002 187 tristate "Sharp GP2AP002 Proximity/ALS sensor" 188 depends on I2C 189 select REGMAP 190 help 191 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip 192 hooked to an I2C bus. 193 194 To compile this driver as a module, choose M here: the 195 module will be called gp2ap002. 196 197config GP2AP020A00F 198 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 199 depends on I2C 200 select REGMAP_I2C 201 select IIO_BUFFER 202 select IIO_TRIGGERED_BUFFER 203 select IRQ_WORK 204 help 205 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 206 hooked to an I2C bus. 207 208 To compile this driver as a module, choose M here: the 209 module will be called gp2ap020a00f. 210 211config IQS621_ALS 212 tristate "Azoteq IQS621/622 ambient light sensors" 213 depends on MFD_IQS62X || COMPILE_TEST 214 help 215 Say Y here if you want to build support for the Azoteq IQS621 216 and IQS622 ambient light sensors. 217 218 To compile this driver as a module, choose M here: the module 219 will be called iqs621-als. 220 221config SENSORS_ISL29018 222 tristate "Intersil 29018 light and proximity sensor" 223 depends on I2C 224 select REGMAP_I2C 225 default n 226 help 227 If you say yes here you get support for ambient light sensing and 228 proximity infrared sensing from Intersil ISL29018. 229 This driver will provide the measurements of ambient light intensity 230 in lux, proximity infrared sensing and normal infrared sensing. 231 Data from sensor is accessible via sysfs. 232 233config SENSORS_ISL29028 234 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 235 depends on I2C 236 select REGMAP_I2C 237 help 238 Provides driver for the Intersil's ISL29028 device. 239 This driver supports the sysfs interface to get the ALS, IR intensity, 240 Proximity value via iio. The ISL29028 provides the concurrent sensing 241 of ambient light and proximity. 242 243config ISL29125 244 tristate "Intersil ISL29125 digital color light sensor" 245 depends on I2C 246 select IIO_BUFFER 247 select IIO_TRIGGERED_BUFFER 248 help 249 Say Y here if you want to build a driver for the Intersil ISL29125 250 RGB light sensor for I2C. 251 252 To compile this driver as a module, choose M here: the module will be 253 called isl29125. 254 255config HID_SENSOR_ALS 256 depends on HID_SENSOR_HUB 257 select IIO_BUFFER 258 select HID_SENSOR_IIO_COMMON 259 select HID_SENSOR_IIO_TRIGGER 260 tristate "HID ALS" 261 help 262 Say yes here to build support for the HID SENSOR 263 Ambient light sensor. 264 265 To compile this driver as a module, choose M here: the 266 module will be called hid-sensor-als. 267 268config HID_SENSOR_PROX 269 depends on HID_SENSOR_HUB 270 select IIO_BUFFER 271 select HID_SENSOR_IIO_COMMON 272 select HID_SENSOR_IIO_TRIGGER 273 tristate "HID PROX" 274 help 275 Say yes here to build support for the HID SENSOR 276 Proximity sensor. 277 278 To compile this driver as a module, choose M here: the 279 module will be called hid-sensor-prox. 280 281config JSA1212 282 tristate "JSA1212 ALS and proximity sensor driver" 283 depends on I2C 284 select REGMAP_I2C 285 help 286 Say Y here if you want to build a IIO driver for JSA1212 287 proximity & ALS sensor device. 288 289 To compile this driver as a module, choose M here: 290 the module will be called jsa1212. 291 292config RPR0521 293 tristate "ROHM RPR0521 ALS and proximity sensor driver" 294 depends on I2C 295 select REGMAP_I2C 296 select IIO_BUFFER 297 select IIO_TRIGGERED_BUFFER 298 help 299 Say Y here if you want to build support for ROHM's RPR0521 300 ambient light and proximity sensor device. 301 302 To compile this driver as a module, choose M here: 303 the module will be called rpr0521. 304 305config SENSORS_LM3533 306 tristate "LM3533 ambient light sensor" 307 depends on MFD_LM3533 308 help 309 If you say yes here you get support for the ambient light sensor 310 interface on National Semiconductor / TI LM3533 Lighting Power 311 chips. 312 313 The sensor interface can be used to control the LEDs and backlights 314 of the chip through defining five light zones and three sets of 315 corresponding output-current values. 316 317 The driver provides raw and mean adc readings along with the current 318 light zone through sysfs. A threshold event can be generated on zone 319 changes. The ALS-control output values can be set per zone for the 320 three current output channels. 321 322config LTR501 323 tristate "LTR-501ALS-01 light sensor" 324 depends on I2C 325 select REGMAP_I2C 326 select IIO_BUFFER 327 select IIO_TRIGGERED_BUFFER 328 help 329 If you say yes here you get support for the Lite-On LTR-501ALS-01 330 ambient light and proximity sensor. This driver also supports LTR-559 331 ALS/PS or LTR-301 ALS sensors. 332 333 This driver can also be built as a module. If so, the module 334 will be called ltr501. 335 336config LTRF216A 337 tristate "Liteon LTRF216A Light Sensor" 338 depends on I2C 339 select REGMAP_I2C 340 help 341 If you say Y or M here, you get support for Liteon LTRF216A 342 Ambient Light Sensor. 343 344 If built as a dynamically linked module, it will be called 345 ltrf216a. 346 347config LV0104CS 348 tristate "LV0104CS Ambient Light Sensor" 349 depends on I2C 350 help 351 Say Y here if you want to build support for the On Semiconductor 352 LV0104CS ambient light sensor. 353 354 To compile this driver as a module, choose M here: 355 the module will be called lv0104cs. 356 357config MAX44000 358 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 359 depends on I2C 360 select REGMAP_I2C 361 select IIO_BUFFER 362 select IIO_TRIGGERED_BUFFER 363 help 364 Say Y here if you want to build support for Maxim Integrated's 365 MAX44000 ambient and infrared proximity sensor device. 366 367 To compile this driver as a module, choose M here: 368 the module will be called max44000. 369 370config MAX44009 371 tristate "MAX44009 Ambient Light Sensor" 372 depends on I2C 373 select REGMAP_I2C 374 help 375 Say Y here if you want to build support for Maxim Integrated's 376 MAX44009 ambient light sensor device. 377 378 To compile this driver as a module, choose M here: 379 the module will be called max44009. 380 381config NOA1305 382 tristate "ON Semiconductor NOA1305 ambient light sensor" 383 depends on I2C 384 select REGMAP_I2C 385 help 386 Say Y here if you want to build support for the ON Semiconductor 387 NOA1305 ambient light sensor. 388 389 To compile this driver as a module, choose M here: 390 The module will be called noa1305. 391 392config OPT3001 393 tristate "Texas Instruments OPT3001 Light Sensor" 394 depends on I2C 395 help 396 If you say Y or M here, you get support for Texas Instruments 397 OPT3001 Ambient Light Sensor. 398 399 If built as a dynamically linked module, it will be called 400 opt3001. 401 402config PA12203001 403 tristate "TXC PA12203001 light and proximity sensor" 404 depends on I2C 405 select REGMAP_I2C 406 help 407 If you say yes here you get support for the TXC PA12203001 408 ambient light and proximity sensor. 409 410 This driver can also be built as a module. If so, the module 411 will be called pa12203001. 412 413config SI1133 414 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 415 depends on I2C 416 select REGMAP_I2C 417 help 418 Say Y here if you want to build a driver for the Silicon Labs SI1133 419 UV Index Sensor and Ambient Light Sensor chip. 420 421 To compile this driver as a module, choose M here: the module will be 422 called si1133. 423 424config SI1145 425 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 426 depends on I2C 427 select IIO_BUFFER 428 select IIO_TRIGGERED_BUFFER 429 help 430 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 431 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 432 chips. 433 434 To compile this driver as a module, choose M here: the module will be 435 called si1145. 436 437config STK3310 438 tristate "STK3310 ALS and proximity sensor" 439 depends on I2C 440 select REGMAP_I2C 441 help 442 Say yes here to get support for the Sensortek STK3310 ambient light 443 and proximity sensor. The STK3311 model is also supported by this 444 driver. 445 446 Choosing M will build the driver as a module. If so, the module 447 will be called stk3310. 448 449config ST_UVIS25 450 tristate "STMicroelectronics UVIS25 sensor driver" 451 depends on (I2C || SPI) 452 select IIO_BUFFER 453 select IIO_TRIGGERED_BUFFER 454 select ST_UVIS25_I2C if (I2C) 455 select ST_UVIS25_SPI if (SPI_MASTER) 456 help 457 Say yes here to build support for STMicroelectronics UVIS25 458 uv sensor 459 460 To compile this driver as a module, choose M here: the module 461 will be called st_uvis25. 462 463config ST_UVIS25_I2C 464 tristate 465 depends on ST_UVIS25 466 select REGMAP_I2C 467 468config ST_UVIS25_SPI 469 tristate 470 depends on ST_UVIS25 471 select REGMAP_SPI 472 473config TCS3414 474 tristate "TAOS TCS3414 digital color sensor" 475 depends on I2C 476 select IIO_BUFFER 477 select IIO_TRIGGERED_BUFFER 478 help 479 If you say yes here you get support for the TAOS TCS3414 480 family of digital color sensors. 481 482 This driver can also be built as a module. If so, the module 483 will be called tcs3414. 484 485config TCS3472 486 tristate "TAOS TCS3472 color light-to-digital converter" 487 depends on I2C 488 select IIO_BUFFER 489 select IIO_TRIGGERED_BUFFER 490 help 491 If you say yes here you get support for the TAOS TCS3472 492 family of color light-to-digital converters with IR filter. 493 494 This driver can also be built as a module. If so, the module 495 will be called tcs3472. 496 497config SENSORS_TSL2563 498 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 499 depends on I2C 500 help 501 If you say yes here you get support for the Taos TSL2560, 502 TSL2561, TSL2562 and TSL2563 ambient light sensors. 503 504 This driver can also be built as a module. If so, the module 505 will be called tsl2563. 506 507config TSL2583 508 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 509 depends on I2C 510 help 511 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 512 Access ALS data via iio, sysfs. 513 514config TSL2591 515 tristate "TAOS TSL2591 ambient light sensor" 516 depends on I2C 517 help 518 Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor, 519 featuring channels for combined visible + IR intensity and lux illuminance. 520 Access data via iio and sysfs. Supports iio_events. 521 522 To compile this driver as a module, select M: the 523 module will be called tsl2591. 524 525config TSL2772 526 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 527 depends on I2C 528 help 529 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 530 tmd2672, tsl2772, tmd2772 devices. 531 Provides iio_events and direct access via sysfs. 532 533config TSL4531 534 tristate "TAOS TSL4531 ambient light sensors" 535 depends on I2C 536 help 537 Say Y here if you want to build a driver for the TAOS TSL4531 family 538 of ambient light sensors with direct lux output. 539 540 To compile this driver as a module, choose M here: the 541 module will be called tsl4531. 542 543config US5182D 544 tristate "UPISEMI light and proximity sensor" 545 depends on I2C 546 help 547 If you say yes here you get support for the UPISEMI US5182D 548 ambient light and proximity sensor. 549 550 This driver can also be built as a module. If so, the module 551 will be called us5182d. 552 553config VCNL4000 554 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 555 select IIO_BUFFER 556 select IIO_TRIGGERED_BUFFER 557 depends on I2C 558 help 559 Say Y here if you want to build a driver for the Vishay VCNL4000, 560 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 561 sensor. 562 563 To compile this driver as a module, choose M here: the 564 module will be called vcnl4000. 565 566config VCNL4035 567 tristate "VCNL4035 combined ALS and proximity sensor" 568 select IIO_BUFFER 569 select IIO_TRIGGERED_BUFFER 570 select REGMAP_I2C 571 depends on I2C 572 help 573 Say Y here if you want to build a driver for the Vishay VCNL4035, 574 combined ambient light (ALS) and proximity sensor. Currently only ALS 575 function is available. 576 577 To compile this driver as a module, choose M here: the 578 module will be called vcnl4035. 579 580config VEML6030 581 tristate "VEML6030 ambient light sensor" 582 select REGMAP_I2C 583 depends on I2C 584 help 585 Say Y here if you want to build a driver for the Vishay VEML6030 586 ambient light sensor (ALS). 587 588 To compile this driver as a module, choose M here: the 589 module will be called veml6030. 590 591config VEML6070 592 tristate "VEML6070 UV A light sensor" 593 depends on I2C 594 help 595 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 596 light sensor. 597 598 To compile this driver as a module, choose M here: the 599 module will be called veml6070. 600 601config VL6180 602 tristate "VL6180 ALS, range and proximity sensor" 603 depends on I2C 604 help 605 Say Y here if you want to build a driver for the STMicroelectronics 606 VL6180 combined ambient light, range and proximity sensor. 607 608 To compile this driver as a module, choose M here: the 609 module will be called vl6180. 610 611config ZOPT2201 612 tristate "ZOPT2201 ALS and UV B sensor" 613 depends on I2C 614 help 615 Say Y here if you want to build a driver for the IDT 616 ZOPT2201 ambient light and UV B sensor. 617 618 To compile this driver as a module, choose M here: the 619 module will be called zopt2201. 620 621endmenu 622