1# 2# Light sensors 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Light sensors" 7 8config ACPI_ALS 9 tristate "ACPI Ambient Light Sensor" 10 depends on ACPI 11 select IIO_BUFFER 12 select IIO_TRIGGERED_BUFFER 13 select IIO_KFIFO_BUF 14 help 15 Say Y here if you want to build a driver for the ACPI0008 16 Ambient Light Sensor. 17 18 To compile this driver as a module, choose M here: the module will 19 be called acpi-als. 20 21config ADJD_S311 22 tristate "ADJD-S311-CR999 digital color sensor" 23 select IIO_BUFFER 24 select IIO_TRIGGERED_BUFFER 25 depends on I2C 26 help 27 If you say yes here you get support for the Avago ADJD-S311-CR999 28 digital color light sensor. 29 30 This driver can also be built as a module. If so, the module 31 will be called adjd_s311. 32 33config AL3320A 34 tristate "AL3320A ambient light sensor" 35 depends on I2C 36 help 37 Say Y here if you want to build a driver for the Dyna Image AL3320A 38 ambient light sensor. 39 40 To compile this driver as a module, choose M here: the 41 module will be called al3320a. 42 43config APDS9300 44 tristate "APDS9300 ambient light sensor" 45 depends on I2C 46 help 47 Say Y here if you want to build a driver for the Avago APDS9300 48 ambient light sensor. 49 50 To compile this driver as a module, choose M here: the 51 module will be called apds9300. 52 53config APDS9960 54 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 55 select REGMAP_I2C 56 select IIO_BUFFER 57 select IIO_KFIFO_BUF 58 depends on I2C 59 help 60 Say Y here to build I2C interface support for the Avago 61 APDS9960 gesture/RGB/ALS/proximity sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called apds9960 65 66config BH1750 67 tristate "ROHM BH1750 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 71 BH1750, BH1751 ambient light sensors. 72 73 To compile this driver as a module, choose M here: the module will 74 be called bh1750. 75 76config BH1780 77 tristate "ROHM BH1780 ambient light sensor" 78 depends on I2C 79 help 80 Say Y here to build support for the ROHM BH1780GLI ambient 81 light sensor. 82 83 To compile this driver as a module, choose M here: the module will 84 be called bh1780. 85 86config CM32181 87 depends on I2C 88 tristate "CM32181 driver" 89 help 90 Say Y here if you use cm32181. 91 This option enables ambient light sensor using 92 Capella cm32181 device driver. 93 94 To compile this driver as a module, choose M here: 95 the module will be called cm32181. 96 97config CM3232 98 depends on I2C 99 tristate "CM3232 ambient light sensor" 100 help 101 Say Y here if you use cm3232. 102 This option enables ambient light sensor using 103 Capella Microsystems cm3232 device driver. 104 105 To compile this driver as a module, choose M here: 106 the module will be called cm3232. 107 108config CM3323 109 depends on I2C 110 tristate "Capella CM3323 color light sensor" 111 help 112 Say Y here if you want to build a driver for Capella CM3323 113 color sensor. 114 115 To compile this driver as a module, choose M here: the module will 116 be called cm3323. 117 118config CM36651 119 depends on I2C 120 tristate "CM36651 driver" 121 help 122 Say Y here if you use cm36651. 123 This option enables proximity & RGB sensor using 124 Capella cm36651 device driver. 125 126 To compile this driver as a module, choose M here: 127 the module will be called cm36651. 128 129config GP2AP020A00F 130 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 131 depends on I2C 132 select REGMAP_I2C 133 select IIO_BUFFER 134 select IIO_TRIGGERED_BUFFER 135 select IRQ_WORK 136 help 137 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 138 hooked to an I2C bus. 139 140 To compile this driver as a module, choose M here: the 141 module will be called gp2ap020a00f. 142 143config SENSORS_ISL29018 144 tristate "Intersil 29018 light and proximity sensor" 145 depends on I2C 146 select REGMAP_I2C 147 default n 148 help 149 If you say yes here you get support for ambient light sensing and 150 proximity infrared sensing from Intersil ISL29018. 151 This driver will provide the measurements of ambient light intensity 152 in lux, proximity infrared sensing and normal infrared sensing. 153 Data from sensor is accessible via sysfs. 154 155config ISL29125 156 tristate "Intersil ISL29125 digital color light sensor" 157 depends on I2C 158 select IIO_BUFFER 159 select IIO_TRIGGERED_BUFFER 160 help 161 Say Y here if you want to build a driver for the Intersil ISL29125 162 RGB light sensor for I2C. 163 164 To compile this driver as a module, choose M here: the module will be 165 called isl29125. 166 167config HID_SENSOR_ALS 168 depends on HID_SENSOR_HUB 169 select IIO_BUFFER 170 select IIO_TRIGGERED_BUFFER 171 select HID_SENSOR_IIO_COMMON 172 select HID_SENSOR_IIO_TRIGGER 173 tristate "HID ALS" 174 help 175 Say yes here to build support for the HID SENSOR 176 Ambient light sensor. 177 178 To compile this driver as a module, choose M here: the 179 module will be called hid-sensor-als. 180 181config HID_SENSOR_PROX 182 depends on HID_SENSOR_HUB 183 select IIO_BUFFER 184 select IIO_TRIGGERED_BUFFER 185 select HID_SENSOR_IIO_COMMON 186 select HID_SENSOR_IIO_TRIGGER 187 tristate "HID PROX" 188 help 189 Say yes here to build support for the HID SENSOR 190 Proximity sensor. 191 192 To compile this driver as a module, choose M here: the 193 module will be called hid-sensor-prox. 194 195config JSA1212 196 tristate "JSA1212 ALS and proximity sensor driver" 197 depends on I2C 198 select REGMAP_I2C 199 help 200 Say Y here if you want to build a IIO driver for JSA1212 201 proximity & ALS sensor device. 202 203 To compile this driver as a module, choose M here: 204 the module will be called jsa1212. 205 206config RPR0521 207 tristate "ROHM RPR0521 ALS and proximity sensor driver" 208 depends on I2C 209 select REGMAP_I2C 210 help 211 Say Y here if you want to build support for ROHM's RPR0521 212 ambient light and proximity sensor device. 213 214 To compile this driver as a module, choose M here: 215 the module will be called rpr0521. 216 217config SENSORS_LM3533 218 tristate "LM3533 ambient light sensor" 219 depends on MFD_LM3533 220 help 221 If you say yes here you get support for the ambient light sensor 222 interface on National Semiconductor / TI LM3533 Lighting Power 223 chips. 224 225 The sensor interface can be used to control the LEDs and backlights 226 of the chip through defining five light zones and three sets of 227 corresponding output-current values. 228 229 The driver provides raw and mean adc readings along with the current 230 light zone through sysfs. A threshold event can be generated on zone 231 changes. The ALS-control output values can be set per zone for the 232 three current output channels. 233 234config LTR501 235 tristate "LTR-501ALS-01 light sensor" 236 depends on I2C 237 select REGMAP_I2C 238 select IIO_BUFFER 239 select IIO_TRIGGERED_BUFFER 240 help 241 If you say yes here you get support for the Lite-On LTR-501ALS-01 242 ambient light and proximity sensor. This driver also supports LTR-559 243 ALS/PS or LTR-301 ALS sensors. 244 245 This driver can also be built as a module. If so, the module 246 will be called ltr501. 247 248config MAX44000 249 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 250 depends on I2C 251 select REGMAP_I2C 252 select IIO_BUFFER 253 select IIO_TRIGGERED_BUFFER 254 help 255 Say Y here if you want to build support for Maxim Integrated's 256 MAX44000 ambient and infrared proximity sensor device. 257 258 To compile this driver as a module, choose M here: 259 the module will be called max44000. 260 261config OPT3001 262 tristate "Texas Instruments OPT3001 Light Sensor" 263 depends on I2C 264 help 265 If you say Y or M here, you get support for Texas Instruments 266 OPT3001 Ambient Light Sensor. 267 268 If built as a dynamically linked module, it will be called 269 opt3001. 270 271config PA12203001 272 tristate "TXC PA12203001 light and proximity sensor" 273 depends on I2C 274 select REGMAP_I2C 275 help 276 If you say yes here you get support for the TXC PA12203001 277 ambient light and proximity sensor. 278 279 This driver can also be built as a module. If so, the module 280 will be called pa12203001. 281 282config SI1145 283 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 284 depends on I2C 285 select IIO_BUFFER 286 select IIO_TRIGGERED_BUFFER 287 help 288 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 289 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 290 chips. 291 292 To compile this driver as a module, choose M here: the module will be 293 called si1145. 294 295config STK3310 296 tristate "STK3310 ALS and proximity sensor" 297 depends on I2C 298 select REGMAP_I2C 299 help 300 Say yes here to get support for the Sensortek STK3310 ambient light 301 and proximity sensor. The STK3311 model is also supported by this 302 driver. 303 304 Choosing M will build the driver as a module. If so, the module 305 will be called stk3310. 306 307config TCS3414 308 tristate "TAOS TCS3414 digital color sensor" 309 depends on I2C 310 select IIO_BUFFER 311 select IIO_TRIGGERED_BUFFER 312 help 313 If you say yes here you get support for the TAOS TCS3414 314 family of digital color sensors. 315 316 This driver can also be built as a module. If so, the module 317 will be called tcs3414. 318 319config TCS3472 320 tristate "TAOS TCS3472 color light-to-digital converter" 321 depends on I2C 322 select IIO_BUFFER 323 select IIO_TRIGGERED_BUFFER 324 help 325 If you say yes here you get support for the TAOS TCS3472 326 family of color light-to-digital converters with IR filter. 327 328 This driver can also be built as a module. If so, the module 329 will be called tcs3472. 330 331config SENSORS_TSL2563 332 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 333 depends on I2C 334 help 335 If you say yes here you get support for the Taos TSL2560, 336 TSL2561, TSL2562 and TSL2563 ambient light sensors. 337 338 This driver can also be built as a module. If so, the module 339 will be called tsl2563. 340 341config TSL2583 342 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 343 depends on I2C 344 help 345 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 346 Access ALS data via iio, sysfs. 347 348config TSL4531 349 tristate "TAOS TSL4531 ambient light sensors" 350 depends on I2C 351 help 352 Say Y here if you want to build a driver for the TAOS TSL4531 family 353 of ambient light sensors with direct lux output. 354 355 To compile this driver as a module, choose M here: the 356 module will be called tsl4531. 357 358config US5182D 359 tristate "UPISEMI light and proximity sensor" 360 depends on I2C 361 help 362 If you say yes here you get support for the UPISEMI US5182D 363 ambient light and proximity sensor. 364 365 This driver can also be built as a module. If so, the module 366 will be called us5182d. 367 368config VCNL4000 369 tristate "VCNL4000/4010/4020 combined ALS and proximity sensor" 370 depends on I2C 371 help 372 Say Y here if you want to build a driver for the Vishay VCNL4000, 373 VCNL4010, VCNL4020 combined ambient light and proximity sensor. 374 375 To compile this driver as a module, choose M here: the 376 module will be called vcnl4000. 377 378config VEML6070 379 tristate "VEML6070 UV A light sensor" 380 depends on I2C 381 help 382 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 383 light sensor. 384 385 To compile this driver as a module, choose M here: the 386 module will be called veml6070. 387 388endmenu 389