1 2# 3# Light sensors 4# 5# When adding new entries keep the list in alphabetical order 6 7menu "Light sensors" 8 9config ACPI_ALS 10 tristate "ACPI Ambient Light Sensor" 11 depends on ACPI 12 select IIO_BUFFER 13 select IIO_TRIGGERED_BUFFER 14 select IIO_KFIFO_BUF 15 help 16 Say Y here if you want to build a driver for the ACPI0008 17 Ambient Light Sensor. 18 19 To compile this driver as a module, choose M here: the module will 20 be called acpi-als. 21 22config ADJD_S311 23 tristate "ADJD-S311-CR999 digital color sensor" 24 select IIO_BUFFER 25 select IIO_TRIGGERED_BUFFER 26 depends on I2C 27 help 28 If you say yes here you get support for the Avago ADJD-S311-CR999 29 digital color light sensor. 30 31 This driver can also be built as a module. If so, the module 32 will be called adjd_s311. 33 34config AL3320A 35 tristate "AL3320A ambient light sensor" 36 depends on I2C 37 help 38 Say Y here if you want to build a driver for the Dyna Image AL3320A 39 ambient light sensor. 40 41 To compile this driver as a module, choose M here: the 42 module will be called al3320a. 43 44config APDS9300 45 tristate "APDS9300 ambient light sensor" 46 depends on I2C 47 help 48 Say Y here if you want to build a driver for the Avago APDS9300 49 ambient light sensor. 50 51 To compile this driver as a module, choose M here: the 52 module will be called apds9300. 53 54config APDS9960 55 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 56 select REGMAP_I2C 57 select IIO_BUFFER 58 select IIO_KFIFO_BUF 59 depends on I2C 60 help 61 Say Y here to build I2C interface support for the Avago 62 APDS9960 gesture/RGB/ALS/proximity sensor. 63 64 To compile this driver as a module, choose M here: the 65 module will be called apds9960 66 67config BH1750 68 tristate "ROHM BH1750 ambient light sensor" 69 depends on I2C 70 help 71 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 72 BH1750, BH1751 ambient light sensors. 73 74 To compile this driver as a module, choose M here: the module will 75 be called bh1750. 76 77config BH1780 78 tristate "ROHM BH1780 ambient light sensor" 79 depends on I2C 80 help 81 Say Y here to build support for the ROHM BH1780GLI ambient 82 light sensor. 83 84 To compile this driver as a module, choose M here: the module will 85 be called bh1780. 86 87config CM32181 88 depends on I2C 89 tristate "CM32181 driver" 90 help 91 Say Y here if you use cm32181. 92 This option enables ambient light sensor using 93 Capella cm32181 device driver. 94 95 To compile this driver as a module, choose M here: 96 the module will be called cm32181. 97 98config CM3232 99 depends on I2C 100 tristate "CM3232 ambient light sensor" 101 help 102 Say Y here if you use cm3232. 103 This option enables ambient light sensor using 104 Capella Microsystems cm3232 device driver. 105 106 To compile this driver as a module, choose M here: 107 the module will be called cm3232. 108 109config CM3323 110 depends on I2C 111 tristate "Capella CM3323 color light sensor" 112 help 113 Say Y here if you want to build a driver for Capella CM3323 114 color sensor. 115 116 To compile this driver as a module, choose M here: the module will 117 be called cm3323. 118 119config CM3605 120 tristate "Capella CM3605 ambient light and proximity sensor" 121 depends on OF 122 help 123 Say Y here if you want to build a driver for Capella CM3605 124 ambient light and short range proximity sensor. 125 126 To compile this driver as a module, choose M here: the module will 127 be called cm3605. 128 129config CM36651 130 depends on I2C 131 tristate "CM36651 driver" 132 help 133 Say Y here if you use cm36651. 134 This option enables proximity & RGB sensor using 135 Capella cm36651 device driver. 136 137 To compile this driver as a module, choose M here: 138 the module will be called cm36651. 139 140config IIO_CROS_EC_LIGHT_PROX 141 tristate "ChromeOS EC Light and Proximity Sensors" 142 depends on IIO_CROS_EC_SENSORS_CORE 143 help 144 Say Y here if you use the light and proximity sensors 145 presented by the ChromeOS EC Sensor hub. 146 147 To compile this driver as a module, choose M here: 148 the module will be called cros_ec_light_prox. 149 150config GP2AP020A00F 151 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 152 depends on I2C 153 select REGMAP_I2C 154 select IIO_BUFFER 155 select IIO_TRIGGERED_BUFFER 156 select IRQ_WORK 157 help 158 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 159 hooked to an I2C bus. 160 161 To compile this driver as a module, choose M here: the 162 module will be called gp2ap020a00f. 163 164config SENSORS_ISL29018 165 tristate "Intersil 29018 light and proximity sensor" 166 depends on I2C 167 select REGMAP_I2C 168 default n 169 help 170 If you say yes here you get support for ambient light sensing and 171 proximity infrared sensing from Intersil ISL29018. 172 This driver will provide the measurements of ambient light intensity 173 in lux, proximity infrared sensing and normal infrared sensing. 174 Data from sensor is accessible via sysfs. 175 176config SENSORS_ISL29028 177 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 178 depends on I2C 179 select REGMAP_I2C 180 help 181 Provides driver for the Intersil's ISL29028 device. 182 This driver supports the sysfs interface to get the ALS, IR intensity, 183 Proximity value via iio. The ISL29028 provides the concurrent sensing 184 of ambient light and proximity. 185 186config ISL29125 187 tristate "Intersil ISL29125 digital color light sensor" 188 depends on I2C 189 select IIO_BUFFER 190 select IIO_TRIGGERED_BUFFER 191 help 192 Say Y here if you want to build a driver for the Intersil ISL29125 193 RGB light sensor for I2C. 194 195 To compile this driver as a module, choose M here: the module will be 196 called isl29125. 197 198config HID_SENSOR_ALS 199 depends on HID_SENSOR_HUB 200 select IIO_BUFFER 201 select IIO_TRIGGERED_BUFFER 202 select HID_SENSOR_IIO_COMMON 203 select HID_SENSOR_IIO_TRIGGER 204 tristate "HID ALS" 205 help 206 Say yes here to build support for the HID SENSOR 207 Ambient light sensor. 208 209 To compile this driver as a module, choose M here: the 210 module will be called hid-sensor-als. 211 212config HID_SENSOR_PROX 213 depends on HID_SENSOR_HUB 214 select IIO_BUFFER 215 select IIO_TRIGGERED_BUFFER 216 select HID_SENSOR_IIO_COMMON 217 select HID_SENSOR_IIO_TRIGGER 218 tristate "HID PROX" 219 help 220 Say yes here to build support for the HID SENSOR 221 Proximity sensor. 222 223 To compile this driver as a module, choose M here: the 224 module will be called hid-sensor-prox. 225 226config JSA1212 227 tristate "JSA1212 ALS and proximity sensor driver" 228 depends on I2C 229 select REGMAP_I2C 230 help 231 Say Y here if you want to build a IIO driver for JSA1212 232 proximity & ALS sensor device. 233 234 To compile this driver as a module, choose M here: 235 the module will be called jsa1212. 236 237config RPR0521 238 tristate "ROHM RPR0521 ALS and proximity sensor driver" 239 depends on I2C 240 select REGMAP_I2C 241 help 242 Say Y here if you want to build support for ROHM's RPR0521 243 ambient light and proximity sensor device. 244 245 To compile this driver as a module, choose M here: 246 the module will be called rpr0521. 247 248config SENSORS_LM3533 249 tristate "LM3533 ambient light sensor" 250 depends on MFD_LM3533 251 help 252 If you say yes here you get support for the ambient light sensor 253 interface on National Semiconductor / TI LM3533 Lighting Power 254 chips. 255 256 The sensor interface can be used to control the LEDs and backlights 257 of the chip through defining five light zones and three sets of 258 corresponding output-current values. 259 260 The driver provides raw and mean adc readings along with the current 261 light zone through sysfs. A threshold event can be generated on zone 262 changes. The ALS-control output values can be set per zone for the 263 three current output channels. 264 265config LTR501 266 tristate "LTR-501ALS-01 light sensor" 267 depends on I2C 268 select REGMAP_I2C 269 select IIO_BUFFER 270 select IIO_TRIGGERED_BUFFER 271 help 272 If you say yes here you get support for the Lite-On LTR-501ALS-01 273 ambient light and proximity sensor. This driver also supports LTR-559 274 ALS/PS or LTR-301 ALS sensors. 275 276 This driver can also be built as a module. If so, the module 277 will be called ltr501. 278 279config LV0104CS 280 tristate "LV0104CS Ambient Light Sensor" 281 depends on I2C 282 help 283 Say Y here if you want to build support for the On Semiconductor 284 LV0104CS ambient light sensor. 285 286 To compile this driver as a module, choose M here: 287 the module will be called lv0104cs. 288 289config MAX44000 290 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 291 depends on I2C 292 select REGMAP_I2C 293 select IIO_BUFFER 294 select IIO_TRIGGERED_BUFFER 295 help 296 Say Y here if you want to build support for Maxim Integrated's 297 MAX44000 ambient and infrared proximity sensor device. 298 299 To compile this driver as a module, choose M here: 300 the module will be called max44000. 301 302config OPT3001 303 tristate "Texas Instruments OPT3001 Light Sensor" 304 depends on I2C 305 help 306 If you say Y or M here, you get support for Texas Instruments 307 OPT3001 Ambient Light Sensor. 308 309 If built as a dynamically linked module, it will be called 310 opt3001. 311 312config PA12203001 313 tristate "TXC PA12203001 light and proximity sensor" 314 depends on I2C 315 select REGMAP_I2C 316 help 317 If you say yes here you get support for the TXC PA12203001 318 ambient light and proximity sensor. 319 320 This driver can also be built as a module. If so, the module 321 will be called pa12203001. 322 323config SI1133 324 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 325 depends on I2C 326 select REGMAP_I2C 327 help 328 Say Y here if you want to build a driver for the Silicon Labs SI1133 329 UV Index Sensor and Ambient Light Sensor chip. 330 331 To compile this driver as a module, choose M here: the module will be 332 called si1133. 333 334config SI1145 335 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 336 depends on I2C 337 select IIO_BUFFER 338 select IIO_TRIGGERED_BUFFER 339 help 340 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 341 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 342 chips. 343 344 To compile this driver as a module, choose M here: the module will be 345 called si1145. 346 347config STK3310 348 tristate "STK3310 ALS and proximity sensor" 349 depends on I2C 350 select REGMAP_I2C 351 help 352 Say yes here to get support for the Sensortek STK3310 ambient light 353 and proximity sensor. The STK3311 model is also supported by this 354 driver. 355 356 Choosing M will build the driver as a module. If so, the module 357 will be called stk3310. 358 359config ST_UVIS25 360 tristate "STMicroelectronics UVIS25 sensor driver" 361 depends on (I2C || SPI) 362 select IIO_BUFFER 363 select IIO_TRIGGERED_BUFFER 364 select ST_UVIS25_I2C if (I2C) 365 select ST_UVIS25_SPI if (SPI_MASTER) 366 help 367 Say yes here to build support for STMicroelectronics UVIS25 368 uv sensor 369 370 To compile this driver as a module, choose M here: the module 371 will be called st_uvis25. 372 373config ST_UVIS25_I2C 374 tristate 375 depends on ST_UVIS25 376 select REGMAP_I2C 377 378config ST_UVIS25_SPI 379 tristate 380 depends on ST_UVIS25 381 select REGMAP_SPI 382 383config TCS3414 384 tristate "TAOS TCS3414 digital color sensor" 385 depends on I2C 386 select IIO_BUFFER 387 select IIO_TRIGGERED_BUFFER 388 help 389 If you say yes here you get support for the TAOS TCS3414 390 family of digital color sensors. 391 392 This driver can also be built as a module. If so, the module 393 will be called tcs3414. 394 395config TCS3472 396 tristate "TAOS TCS3472 color light-to-digital converter" 397 depends on I2C 398 select IIO_BUFFER 399 select IIO_TRIGGERED_BUFFER 400 help 401 If you say yes here you get support for the TAOS TCS3472 402 family of color light-to-digital converters with IR filter. 403 404 This driver can also be built as a module. If so, the module 405 will be called tcs3472. 406 407config SENSORS_TSL2563 408 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 409 depends on I2C 410 help 411 If you say yes here you get support for the Taos TSL2560, 412 TSL2561, TSL2562 and TSL2563 ambient light sensors. 413 414 This driver can also be built as a module. If so, the module 415 will be called tsl2563. 416 417config TSL2583 418 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 419 depends on I2C 420 help 421 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 422 Access ALS data via iio, sysfs. 423 424config TSL2772 425 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 426 depends on I2C 427 help 428 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 429 tmd2672, tsl2772, tmd2772 devices. 430 Provides iio_events and direct access via sysfs. 431 432config TSL4531 433 tristate "TAOS TSL4531 ambient light sensors" 434 depends on I2C 435 help 436 Say Y here if you want to build a driver for the TAOS TSL4531 family 437 of ambient light sensors with direct lux output. 438 439 To compile this driver as a module, choose M here: the 440 module will be called tsl4531. 441 442config US5182D 443 tristate "UPISEMI light and proximity sensor" 444 depends on I2C 445 help 446 If you say yes here you get support for the UPISEMI US5182D 447 ambient light and proximity sensor. 448 449 This driver can also be built as a module. If so, the module 450 will be called us5182d. 451 452config VCNL4000 453 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 454 depends on I2C 455 help 456 Say Y here if you want to build a driver for the Vishay VCNL4000, 457 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 458 sensor. 459 460 To compile this driver as a module, choose M here: the 461 module will be called vcnl4000. 462 463config VCNL4035 464 tristate "VCNL4035 combined ALS and proximity sensor" 465 select IIO_TRIGGERED_BUFFER 466 select REGMAP_I2C 467 depends on I2C 468 help 469 Say Y here if you want to build a driver for the Vishay VCNL4035, 470 combined ambient light (ALS) and proximity sensor. Currently only ALS 471 function is available. 472 473 To compile this driver as a module, choose M here: the 474 module will be called vcnl4035. 475 476config VEML6070 477 tristate "VEML6070 UV A light sensor" 478 depends on I2C 479 help 480 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 481 light sensor. 482 483 To compile this driver as a module, choose M here: the 484 module will be called veml6070. 485 486config VL6180 487 tristate "VL6180 ALS, range and proximity sensor" 488 depends on I2C 489 help 490 Say Y here if you want to build a driver for the STMicroelectronics 491 VL6180 combined ambient light, range and proximity sensor. 492 493 To compile this driver as a module, choose M here: the 494 module will be called vl6180. 495 496config ZOPT2201 497 tristate "ZOPT2201 ALS and UV B sensor" 498 depends on I2C 499 help 500 Say Y here if you want to build a driver for the IDT 501 ZOPT2201 ambient light and UV B sensor. 502 503 To compile this driver as a module, choose M here: the 504 module will be called zopt2201. 505 506endmenu 507