1# 2# Light sensors 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Light sensors" 7 8config ACPI_ALS 9 tristate "ACPI Ambient Light Sensor" 10 depends on ACPI 11 select IIO_BUFFER 12 select IIO_TRIGGERED_BUFFER 13 select IIO_KFIFO_BUF 14 help 15 Say Y here if you want to build a driver for the ACPI0008 16 Ambient Light Sensor. 17 18 To compile this driver as a module, choose M here: the module will 19 be called acpi-als. 20 21config ADJD_S311 22 tristate "ADJD-S311-CR999 digital color sensor" 23 select IIO_BUFFER 24 select IIO_TRIGGERED_BUFFER 25 depends on I2C 26 help 27 If you say yes here you get support for the Avago ADJD-S311-CR999 28 digital color light sensor. 29 30 This driver can also be built as a module. If so, the module 31 will be called adjd_s311. 32 33config AL3320A 34 tristate "AL3320A ambient light sensor" 35 depends on I2C 36 help 37 Say Y here if you want to build a driver for the Dyna Image AL3320A 38 ambient light sensor. 39 40 To compile this driver as a module, choose M here: the 41 module will be called al3320a. 42 43config APDS9300 44 tristate "APDS9300 ambient light sensor" 45 depends on I2C 46 help 47 Say Y here if you want to build a driver for the Avago APDS9300 48 ambient light sensor. 49 50 To compile this driver as a module, choose M here: the 51 module will be called apds9300. 52 53config APDS9960 54 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 55 select REGMAP_I2C 56 select IIO_BUFFER 57 select IIO_KFIFO_BUF 58 depends on I2C 59 help 60 Say Y here to build I2C interface support for the Avago 61 APDS9960 gesture/RGB/ALS/proximity sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called apds9960 65 66config BH1750 67 tristate "ROHM BH1750 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 71 BH1750, BH1751 ambient light sensors. 72 73 To compile this driver as a module, choose M here: the module will 74 be called bh1750. 75 76config BH1780 77 tristate "ROHM BH1780 ambient light sensor" 78 depends on I2C 79 help 80 Say Y here to build support for the ROHM BH1780GLI ambient 81 light sensor. 82 83 To compile this driver as a module, choose M here: the module will 84 be called bh1780. 85 86config CM32181 87 depends on I2C 88 tristate "CM32181 driver" 89 help 90 Say Y here if you use cm32181. 91 This option enables ambient light sensor using 92 Capella cm32181 device driver. 93 94 To compile this driver as a module, choose M here: 95 the module will be called cm32181. 96 97config CM3232 98 depends on I2C 99 tristate "CM3232 ambient light sensor" 100 help 101 Say Y here if you use cm3232. 102 This option enables ambient light sensor using 103 Capella Microsystems cm3232 device driver. 104 105 To compile this driver as a module, choose M here: 106 the module will be called cm3232. 107 108config CM3323 109 depends on I2C 110 tristate "Capella CM3323 color light sensor" 111 help 112 Say Y here if you want to build a driver for Capella CM3323 113 color sensor. 114 115 To compile this driver as a module, choose M here: the module will 116 be called cm3323. 117 118config CM36651 119 depends on I2C 120 tristate "CM36651 driver" 121 help 122 Say Y here if you use cm36651. 123 This option enables proximity & RGB sensor using 124 Capella cm36651 device driver. 125 126 To compile this driver as a module, choose M here: 127 the module will be called cm36651. 128 129config GP2AP020A00F 130 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 131 depends on I2C 132 select REGMAP_I2C 133 select IIO_BUFFER 134 select IIO_TRIGGERED_BUFFER 135 select IRQ_WORK 136 help 137 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 138 hooked to an I2C bus. 139 140 To compile this driver as a module, choose M here: the 141 module will be called gp2ap020a00f. 142 143config ISL29125 144 tristate "Intersil ISL29125 digital color light sensor" 145 depends on I2C 146 select IIO_BUFFER 147 select IIO_TRIGGERED_BUFFER 148 help 149 Say Y here if you want to build a driver for the Intersil ISL29125 150 RGB light sensor for I2C. 151 152 To compile this driver as a module, choose M here: the module will be 153 called isl29125. 154 155config HID_SENSOR_ALS 156 depends on HID_SENSOR_HUB 157 select IIO_BUFFER 158 select IIO_TRIGGERED_BUFFER 159 select HID_SENSOR_IIO_COMMON 160 select HID_SENSOR_IIO_TRIGGER 161 tristate "HID ALS" 162 help 163 Say yes here to build support for the HID SENSOR 164 Ambient light sensor. 165 166 To compile this driver as a module, choose M here: the 167 module will be called hid-sensor-als. 168 169config HID_SENSOR_PROX 170 depends on HID_SENSOR_HUB 171 select IIO_BUFFER 172 select IIO_TRIGGERED_BUFFER 173 select HID_SENSOR_IIO_COMMON 174 select HID_SENSOR_IIO_TRIGGER 175 tristate "HID PROX" 176 help 177 Say yes here to build support for the HID SENSOR 178 Proximity sensor. 179 180 To compile this driver as a module, choose M here: the 181 module will be called hid-sensor-prox. 182 183config JSA1212 184 tristate "JSA1212 ALS and proximity sensor driver" 185 depends on I2C 186 select REGMAP_I2C 187 help 188 Say Y here if you want to build a IIO driver for JSA1212 189 proximity & ALS sensor device. 190 191 To compile this driver as a module, choose M here: 192 the module will be called jsa1212. 193 194config RPR0521 195 tristate "ROHM RPR0521 ALS and proximity sensor driver" 196 depends on I2C 197 select REGMAP_I2C 198 help 199 Say Y here if you want to build support for ROHM's RPR0521 200 ambient light and proximity sensor device. 201 202 To compile this driver as a module, choose M here: 203 the module will be called rpr0521. 204 205config SENSORS_LM3533 206 tristate "LM3533 ambient light sensor" 207 depends on MFD_LM3533 208 help 209 If you say yes here you get support for the ambient light sensor 210 interface on National Semiconductor / TI LM3533 Lighting Power 211 chips. 212 213 The sensor interface can be used to control the LEDs and backlights 214 of the chip through defining five light zones and three sets of 215 corresponding output-current values. 216 217 The driver provides raw and mean adc readings along with the current 218 light zone through sysfs. A threshold event can be generated on zone 219 changes. The ALS-control output values can be set per zone for the 220 three current output channels. 221 222config LTR501 223 tristate "LTR-501ALS-01 light sensor" 224 depends on I2C 225 select REGMAP_I2C 226 select IIO_BUFFER 227 select IIO_TRIGGERED_BUFFER 228 help 229 If you say yes here you get support for the Lite-On LTR-501ALS-01 230 ambient light and proximity sensor. This driver also supports LTR-559 231 ALS/PS or LTR-301 ALS sensors. 232 233 This driver can also be built as a module. If so, the module 234 will be called ltr501. 235 236config MAX44000 237 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 238 depends on I2C 239 select REGMAP_I2C 240 select IIO_BUFFER 241 select IIO_TRIGGERED_BUFFER 242 help 243 Say Y here if you want to build support for Maxim Integrated's 244 MAX44000 ambient and infrared proximity sensor device. 245 246 To compile this driver as a module, choose M here: 247 the module will be called max44000. 248 249config OPT3001 250 tristate "Texas Instruments OPT3001 Light Sensor" 251 depends on I2C 252 help 253 If you say Y or M here, you get support for Texas Instruments 254 OPT3001 Ambient Light Sensor. 255 256 If built as a dynamically linked module, it will be called 257 opt3001. 258 259config PA12203001 260 tristate "TXC PA12203001 light and proximity sensor" 261 depends on I2C 262 select REGMAP_I2C 263 help 264 If you say yes here you get support for the TXC PA12203001 265 ambient light and proximity sensor. 266 267 This driver can also be built as a module. If so, the module 268 will be called pa12203001. 269 270config STK3310 271 tristate "STK3310 ALS and proximity sensor" 272 depends on I2C 273 select REGMAP_I2C 274 help 275 Say yes here to get support for the Sensortek STK3310 ambient light 276 and proximity sensor. The STK3311 model is also supported by this 277 driver. 278 279 Choosing M will build the driver as a module. If so, the module 280 will be called stk3310. 281 282config TCS3414 283 tristate "TAOS TCS3414 digital color sensor" 284 depends on I2C 285 select IIO_BUFFER 286 select IIO_TRIGGERED_BUFFER 287 help 288 If you say yes here you get support for the TAOS TCS3414 289 family of digital color sensors. 290 291 This driver can also be built as a module. If so, the module 292 will be called tcs3414. 293 294config TCS3472 295 tristate "TAOS TCS3472 color light-to-digital converter" 296 depends on I2C 297 select IIO_BUFFER 298 select IIO_TRIGGERED_BUFFER 299 help 300 If you say yes here you get support for the TAOS TCS3472 301 family of color light-to-digital converters with IR filter. 302 303 This driver can also be built as a module. If so, the module 304 will be called tcs3472. 305 306config SENSORS_TSL2563 307 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 308 depends on I2C 309 help 310 If you say yes here you get support for the Taos TSL2560, 311 TSL2561, TSL2562 and TSL2563 ambient light sensors. 312 313 This driver can also be built as a module. If so, the module 314 will be called tsl2563. 315 316config TSL4531 317 tristate "TAOS TSL4531 ambient light sensors" 318 depends on I2C 319 help 320 Say Y here if you want to build a driver for the TAOS TSL4531 family 321 of ambient light sensors with direct lux output. 322 323 To compile this driver as a module, choose M here: the 324 module will be called tsl4531. 325 326config US5182D 327 tristate "UPISEMI light and proximity sensor" 328 depends on I2C 329 help 330 If you say yes here you get support for the UPISEMI US5182D 331 ambient light and proximity sensor. 332 333 This driver can also be built as a module. If so, the module 334 will be called us5182d. 335 336config VCNL4000 337 tristate "VCNL4000 combined ALS and proximity sensor" 338 depends on I2C 339 help 340 Say Y here if you want to build a driver for the Vishay VCNL4000 341 combined ambient light and proximity sensor. 342 343 To compile this driver as a module, choose M here: the 344 module will be called vcnl4000. 345 346config VEML6070 347 tristate "VEML6070 UV A light sensor" 348 depends on I2C 349 help 350 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 351 light sensor. 352 353 To compile this driver as a module, choose M here: the 354 module will be called veml6070. 355 356endmenu 357